Guys, as title says, i'm trying to add otg support in kernel, please flash and use some otg device and confirm whether it works or not.
Dont have time to add proper content, so just note some points:
1. Its for ICS ROMS
2. It might not work
3. Please test with cable and USB Host Diagnostic app from Play Store
4. It might not work
Its built on my neXusKernelv1 so expect the performance and other features to stay intact.
DOWNLOAD:
See attachment.
Regards
Yasir
Asking a small question, do I need external power source? (Just like sensation??)
Not working for me. rom: SkyDragon
megacrash said:
Not working for me. rom: SkyDragon
Click to expand...
Click to collapse
ok, then 2 suggessions,
1. Try with Stock rom.
2. Try using external power source.
I'll try another build tonight. Maybe we need to add something to build.prop and ramdisk also. I'll workk on it.
1. Also not working on stock rom.
2. I don't have usb hub with power source. Or do you mean something else?
topjohnwu said:
Asking a small question, do I need external power source? (Just like sensation??)
Click to expand...
Click to collapse
megacrash said:
1. Also not working on stock rom.
2. I don't have usb hub with power source. Or do you mean something else?
Click to expand...
Click to collapse
I am refering to what the guy above you said.
Actually, the things is, i dont have OTG cable, and i have never used it either. I saw in kernel config that it is configurable, so i want to enable it for those who want it. For that, i will need a dedicated tester to test each release that i make. I will modify some build.prop entries tonight to make it work. Any one willing to spare time for above mentioned thing, please PM me.
Regards
Yasir
Guys, Try this app and give me its reports.
http://forum.xda-developers.com/showthread.php?t=1802740
It said that i have not support for storage...(i don't know how it looks in original, because I use russian lang. ) I guess, it's mean that kernel does still not provide OTG. на конце палкиBy the way, Sense.Revolution+R1 JB thinks that it phone is on charging when i connecting OTG cable without USB device on the end. Maybe it helps somehow... =))
2 Questions:
What the hell mean otg ?
and why for ics ? i guess now many users use jb.
mefistoreyon said:
2 Questions:
What the hell mean otg ?
and why for ics ? i guess now many users use jb.
Click to expand...
Click to collapse
Usb otg= usb on-the-go. It means that you may connect usb devices(mouse, keyboard, usb flash memory, hard disk etc) to your phone. So you can control your phone using mouse and keyboard, and browse files and folders in your usb memory.
mefistoreyon said:
2 Questions:
What the hell mean otg ?
and why for ics ? i guess now many users use jb.
Click to expand...
Click to collapse
Search it.
Flowed from my HTC branded muffin...
OTG might be a bit more tricky. Im researching on it a bit more.
Anyways, otg or no otg, this thread can be continuation of my neXusKernel. I will be basing future builds on v1 becoz v2 and v3 generally got bad reviews.
Atis112 made some updates on the clock rates of ICS kernel so i will release a build in a few hours.
Upcoming:
neXusKernel-v4
Regards
Yasir
neXus PRIME said:
OTG might be a bit more tricky. Im researching on it a bit more.
Anyways, otg or no otg, this thread can be continuation of my neXusKernel. I will be basing future builds on v1 becoz v2 and v3 generally got bad reviews.
Atis112 made some updates on the clock rates of ICS kernel so i will release a build in a few hours.
Upcoming:
neXusKernel-v4
Regards
Yasir
Click to expand...
Click to collapse
Wise decision to base it on v1.
I've tried it all. Came back to v1.
Its rock solid mate.
Eagerly awaiting your next release.
Regards,
navmad
neXus PRIME said:
OTG might be a bit more tricky. Im researching on it a bit more.
Anyways, otg or no otg, this thread can be continuation of my neXusKernel. I will be basing future builds on v1 becoz v2 and v3 generally got bad reviews.
Atis112 made some updates on the clock rates of ICS kernel so i will release a build in a few hours.
Upcoming:
neXusKernel-v4
Regards
Yasir
Click to expand...
Click to collapse
I hope you get JB OTA soon to start developing for it. Btw I'm testing JB for you .
Tilapia running on
AOKP PUB Tilapia
Motley 249
Something is messed up big time in his commits OR, i think he hasnt finished what he started, so its not building completely. Now back on researching for OTG. or any other thing that i can add.
Feature requests are welcome, but you'll have to help me find stuff.
Regards
neXus PRIME said:
Something is messed up big time in his commits OR, i think he hasnt finished what he started, so its not building completely. Now back on researching for OTG. or any other thing that i can add.
Feature requests are welcome, but you'll have to help me find stuff.
Regards
Click to expand...
Click to collapse
Yes,i didn't finish it because i stopped all ics projects when jb was here, and im waiting for jb kernel sources now.
does not work for me too
I am on skydragon 2.2
I used an adapter, not sure if it can work that way
will give it a try with a different ROM later today
If i take a look at the Snapdragon specs here:
http://www.qualcomm.com/sites/default/files/common/products-services/snapdragon_specs_9-12.pdf
then i see that the S4 pro/plus specifically include OTG support.
On the other hand, our S4 play indicates 'USB 2.0 HS Peripheral or Host'.
This seems to indicate that it does not support the OTG protocol (which includes a little bit more than just working as usb-host, like automatically figuring out which role to use).
But it also seems that it should be able to work as a USB host. The question remains whether you can select this mode via the kernel or that it is hardwired in the circuitry.
OTG works fine on DX with JB rom. It's mean, that DX is able to support USB-host. May be just need JB sources for porting this feature on ISC?
megacrash said:
OTG works fine on DX with JB rom. It's mean, that DX is able to support USB-host. May be just need JB sources for porting this feature on ISC?
Click to expand...
Click to collapse
I think we never will get the JB sources -.-, but maybe we can port it later. Now i s*ck with HW v-sync support. If i can include it to ics kernel sources, people will be able to use official JB with all hboot, and without /system write protection. If it's ready, i will check otg support too
Related
Do ICS Roms support usb host?Can someone try and answer here.
HaHaBuRGeR said:
Do ICS Roms support usb host?Can someone try and answer here.
Click to expand...
Click to collapse
No, not working for me...... I even tried to connect pen drives to ONE X, but no go.
Not currently. USB OTG needs support ROM and kernel side. AFAIK, ICS has support built in. but I'm not sure if it needs to be enabled via kernel, or what. I really hope it comes through after we get source though.
121212121212121212
I vote for AOSP maybe the CM9 will be more hard to fix all that bugs and it's so much better start in 0
Good idea Fera!!!
also benjamin (scritch007) helped me a lot with 32kernel and actually we are doing it together...anyway , soon I'm gonna push the sources to github so we all could work on it...we hope to get it work perfectly but as fera said there is some limitations...
I think cm9.1 base would be a more clean, just released from google looking experience. And with you all the others working hard to accomplish x10 rebirth things should go well (If unwanted I'll delete this comment)
Sent from my X10i using xda app-developers app
if there is stuff that i can do to help in anyway once i recive my x10 my machine is good enough to compile roms and kernel leeme know :0 goodluck amin,scrticht and fera! maybe we could get some jelly flowing through our x10s
Don't wont to spam this thread but there is one more thing that is missing in CM9.
Its implementation of DASH sensor, especially light sensor, which might have great influence on battery.
Sensor in SE Stock ROM causes:
- increasing backlight (and power consumption) while phone is in intense light (sun) - which improves usability
- decreasing baclight (and power consumption as well) while in low light.
I know that J has some problems with finding a file for light sensor maybe U'll find it out
Sony released DASH sensors libs as open source but I'm not sure if its for 2010 xperia line http://developer.sonymobile.com/201...l-dash-developers-can-contribute-open-source/
Created new thread for CM9.1 based rom with fixes that Fera is talking about. The Hardware Video decoders video patch, I couldn't find one define, don't know where it comes from TARGET8x50.
Regarding the .32 kernel KTG based. I managed to get a booting kernel, when removing kgsl. But no camera, no charger (which can be annoying after a day of use ).
When activating the kgsl I had a blinking screen, and after a while it would reboot. And I would have to struggle flashing back a working kernel.
For info you can check my sources. The merge_fxp branch here
I would like to help, i have a pretty fast machine to copmpile but very slow internet (512/128).
I just have a small idea for the one like me that want to help.
Could it be possible for someone who already compiled a CM9 to build a VMWare VM with already all the needed stuff installed.
The linux version, SDK, make and build tools and a checkout of the CM9.
Then someone that want to help will just need to sync the repo and build.
What do you think of this ?
Best regards,
U.
ok firstly my two cents here
1. i have a access to goo.im build servers so i can make builds without any problem
2. we should maintain common repository for all this stuff (i think scritchz's repository for device tree is best, and Fera's kernel tree should be ok)
3. from the beginning we need to focus on 'fixing' rather than 'adding' GOLDEN RULE : fix stuff that is not working before adding tons of features to kernel and rom.
4. please no 'thank you for this' posts. someone please get in touch with original_ganjaman and get ensured that this remains dev-thread. i understand all feelings, but it becomes difficult to find necessary info there are posts that have nothing to do with development. if you want to chat come the General CHat thread and i will chat with you all day but not here please.
5. Linaro : forget it for now. let's just be able to build it. Linaro does not make ROM 500% faster or anything. i have used linaro and non linaro compilations for Xperia S. trust me nothing makes a difference.
6. kernel : focus on .29, .32 is not fully working yet. we will just upgrade parts and backport stuff from new kernels as and when needed.
right now one stuff that needs be done importantly is inline kernel and wifi building. (it's not good using prebuilts, because inline method will allow us getting changes merged to kernel at every ROM release. )
see this https://github.com/freexperia/vendor_atheros_wlan is the wlan driver released with X10 latest kernel source
this file https://github.com/freexperia/vendor_atheros_wlan/blob/master/Android.mk is compatible with GB build system
if you compile GB you'll see it builds, but when you go to ICS it fails because PRODUCT_COPY_FILES is depreacted.
we need a newer ar6002 wifi source that will enable hotspot. (because right now we use prebuilt libs so we use AWEXT in wifi_supplicant so it's not hotspot compatible)
and yeah we need to work with CM... it's the easisest to continue working with.
scritch007 said:
Created new thread for CM9.1 based rom with fixes that Fera is talking about. The Hardware Video decoders video patch, I couldn't find one define, don't know where it comes from TARGET8x50.
Regarding the .32 kernel KTG based. I managed to get a booting kernel, when removing kgsl. But no camera, no charger (which can be annoying after a day of use ).
When activating the kgsl I had a blinking screen, and after a while it would reboot. And I would have to struggle flashing back a working kernel.
For info you can check my sources. The merge_fxp branch here
Click to expand...
Click to collapse
Big thanks man.. the sources you mentioned is for. 32 kernel right? If so.. I'll damn juice it now...for Khalid i think maybe it's will try to mess with that.. being back from university.. thanks again
Peace
Sent from my ST18 using xda app-developers app
FeraVolt said:
Big thanks man.. the sources you mentioned is for. 32 kernel right? If so.. I'll damn juice it now...for Khalid i think maybe it's will try to mess with that.. being back from university.. thanks again
Peace
Sent from my ST18 using xda app-developers app
Click to expand...
Click to collapse
Yes sources are based on KTG.
One thing you should look at before anything is a definition
kernel-2.6.32.9/include/linux/msm_mdp.h
in struct mdp_img
remove uint32_t priv;
https://github.com/skritchz/KTG-Kernel_es209ra/commit/36c84cfc82e0f6092b4224f225edfe29619c8d0f
The mdp_blit request used by the Rom doesn't have this field, so it mixes every thing after this. This was leading to a "mdp_ppp src img size of zero" message in the kernel
You'll see in the code that there is still kgsl definitions, in fact I got into a bug when porting FXP sources, which made the rom boot . if you want to enable kgsl, you have to remove some lines in board_es209ra.c
line 2331 comment the whole following block
size = gpu_phys_size;
if (size) {
addr = alloc_bootmem(size);
kgsl_3d0_resources[1].start = __pa(addr);
kgsl_3d0_resources[1].end = kgsl_3d0_resources[1].start + size - 1;
pr_info("allocating %lu bytes at %p (%lx physical) for "
"KGSL\n", size, addr, __pa(addr));
}
That will enable kgsl but the rom won't boot.
thanks man.. i got it.. but without kgsl..its bad right.. so i think i will try to dig into board config..
and few words about linaro..yeah.. i didnt see much difference in kernel..at least..thought it will make some sence for rom compiling..at least everybody was saying about that..
peace
FeraVolt said:
thanks man.. i got it.. but without kgsl..its bad right.. so i think i will try to dig into board config..
and few words about linaro..yeah.. i didnt see much difference in kernel..at least..thought it will make some sence for rom compiling..at least everybody was saying about that..
peace
Click to expand...
Click to collapse
Actually for the use I've done of the rom, i don't feel that much a difference without kgsl, but I haven't try using games and stuff like that. The real main issue was the charger . Since flashing really take some battery I had to go back to current kernel really quickly.
Regarding linaro, don't know much about real improvement on our current rom.
scritch007 said:
Actually for the use I've done of the rom, i don't feel that much a difference without kgsl, but I haven't try using games and stuff like that. The real main issue was the charger . Since flashing really take some battery I had to go back to current kernel really quickly.
Regarding linaro, don't know much about real improvement on our current rom.
Click to expand...
Click to collapse
Lol i understand you.. btw..maybe you forget battery driver to compile?
CONFIG_MAX17040_FUELGAUGE
and only this.. dont select other ones...
and about KGSL...we are plannig to use HWA right? lol..
peace
@fera
So I shouldn't apply this patch yet?
http://forum.xda-developers.com/showthread.php?t=1411317
scritch007 said:
@fera
So I shouldn't apply this patch yet?
http://forum.xda-developers.com/showthread.php?t=1411317
Click to expand...
Click to collapse
no...not this... this one is ok for applying.. i'm talking about 2d harware rendering patch.. from linaro..it seems like its incapable or so... but i sved your framework..in case..because today will mess with newer kgsl..maybe it would be ok..
It seems airplane mod wlod was not here in FXP128 ....
EDIT : Kernel related so forget about it (thanks scritch007 for his help and answers to my "noob questions" !!! ...need further investigations ....
Btw if anyone got ideas, I'm ready to read ...
Cheers
would it be possible to just edit bluetooth stuff? casue without bluetooth flies airplane works...
mcsqwizzys98 said:
would it be possible to just edit bluetooth stuff? casue without bluetooth flies airplane works...
Click to expand...
Click to collapse
Two ways of doing things.
1) Find in the kernel what causes the issue.
2) In the CM rom, do not call make kernel call when Bluetooth is disable. (Easier to do, but I would rather find the reason for the WLOD).
Don't worry we'll have the air plane mode working eventually. (When it depends on other dev and or when I'll be done with exif stuff on the camera)
scritch007 said:
Two ways of doing things.
1) Find in the kernel what causes the issue.
2) In the CM rom, do not call make kernel call when Bluetooth is disable. (Easier to do, but I would rather find the reason for the WLOD).
Don't worry we'll have the air plane mode working eventually. (When it depends on other dev and or when I'll be done with exif stuff on the camera)
Click to expand...
Click to collapse
I'll report later tests I'll make tonight.. I'll edit this post.
EDIT : could not do many thing before now ... got a dmesg log here
Will look after it to understand which variable(s) are wrong ...
Don't hesitate to have a look at the log :highfive:
I don't know if i've posted this in the right section, but at times on and off i've thought about doing rom development. When I had a Nexus S 4G I made the attempt of being the first to compile ICS from source for that phone. This phone needs roms, I also can't afford to switch phones. I don't know alot about development, but where could I start so I can begin to learn how to build roms? How difficult would it be to get a rom compiled for this phone that'll boot, being that it has a locked bootloader? If someone can help me so I can at least try to do some type of development for this device. I have to flash some type of custom rom on this phone, lol.
imo the best is a port of cyanogenmod with sources of phones similar to optimus l9 and for sure versions like 4.1 ++
this version of android excisting in optimus l9 ics is working fine. it would be nice porting of newer versions.
Finally someone...first.
Juanito216 said:
I don't know if i've posted this in the right section, but at times on and off i've thought about doing rom development. When I had a Nexus S 4G I made the attempt of being the first to compile ICS from source for that phone. This phone needs roms, I also can't afford to switch phones. I don't know alot about development, but where could I start so I can begin to learn how to build roms? How difficult would it be to get a rom compiled for this phone that'll boot? Being that it has a locked bootloader? If someone can help me so I can at least try to do some type of development for this device. I have to flash some type of custom rom on this phone, lol.
Click to expand...
Click to collapse
Glad and happy to see someone (first one) a developer is willing to work on Source Codes. May be for you only I did collected all the resources.
Source Codes here,
Unrooted Stock Roms here,
Flashing and Rooting here and
Rooted CWM Backups here.
See already collected so much of information so some developer will start working. Did this because the LG links were rapidly dying and still are.
I am not developer, but I will be happy to become a tester for you and would like to try to help you in any way you may want. Happy Developing, BIG THANKS and Best of luck.
I'll start after I get a new ethernet cable for my computer, Ubuntu doesn't work well with my wifi usb adapter. Works fine in Windows and was working ok in Linux Mint, abeit kinda slow. I may have to ask someone for help or for guidance, but i'll try to do something. Better than complaining about no roms but not doing anything to help bring one. I don't know how difficult it would be but I was thinking about building JB from source for this phone?
Hi men! i'm working for make ics (cm9) and jellybean (cm10.1) working on p760! here are the source https://github.com/lgics/android_device_lge_p760
i'm using bootstrap method!
markolino631 said:
Hi men! i'm working for make ics (cm9) and jellybean (cm10.1) working on p760! here are the source https://github.com/lgics/android_device_lge_p760
i'm using bootstrap method!
Click to expand...
Click to collapse
Could I use that to make something for P769?
Sent from my LG-P769 using Tapatalk 2
R: [Q] Thinking About Rom Development..
yes!
Inviato dal mio LG-P760 con Tapatalk 2
Thanks a lot Juanito216 and markolino631, if pals like you come together and share ideas, it will help a community for sure. Best of Luck
If you need any help in any resources or testing, I am here. I am not developer, but better than just a user.
markolino631 said:
Hi men! i'm working for make ics (cm9) and jellybean (cm10.1) working on p760! here are the source https://github.com/lgics/android_device_lge_p760
i'm using bootstrap method!
Click to expand...
Click to collapse
i think this is just wat i need to get a lil somethin goin........atleast i hope
Hey guys, I haven't forgot. I still don't have any ethernet cable, but my sister let me install Ubuntu dual boot on her laptop. I installed it tonight and using it now so i'm going to set other things up tonight.
Hey everyone,
first let me thank you for this forum, especially thanks to all the developers. I've been using ROMs, apps and information from this site for ages!
I'm using a SGS2 with Chameleon 3.0.3 and its kernel. For work (I'm a teacher) I need the ability to plug the phone to a beamer with my MHL adapter. That's why I'm using Chameleon since it is built on stock. Everything is working fine so far.
However, I'd really like to go back to CM, I've used it for all my previous phones and really loved it. Is there any way I can use CM10.1 but keep a stock kernel? I've already tried using PhilZ kernel with CM, but the MHL adapter didn't work.
Has anyone managed to get the MHL port working on any CM version?
Would be great if anyone could help. Thanks in advance!
m4zzic said:
Hey everyone,
first let me thank you for this forum, especially thanks to all the developers. I've been using ROMs, apps and information from this site for ages!
I'm using a SGS2 with Chameleon 3.0.3 and its kernel. For work (I'm a teacher) I need the ability to plug the phone to a beamer with my MHL adapter. That's why I'm using Chameleon since it is built on stock. Everything is working fine so far.
However, I'd really like to go back to CM, I've used it for all my previous phones and really loved it. Is there any way I can use CM10.1 but keep a stock kernel? I've already tried using PhilZ kernel with CM, but the MHL adapter didn't work.
Has anyone managed to get the MHL port working on any CM version?
Would be great if anyone could help. Thanks in advance!
Click to expand...
Click to collapse
MHL is not working on CM,nor on any AOKP,AOSP based ROM.The sources of Samsung are closed,so nobody can port it to other ROMs.But here is a tip.Look at my signature.I'm using JellyBam ROM and Chameleon ROM at the same time with Dual Booting via Dori kernel.I use Chameleon only for MHL,and it's working.And BTW,kernel has nothing to do with the MHL.
GamingDj said:
MHL is not working on CM,nor on any AOKP,AOSP based ROM.The sources of Samsung are closed,so nobody can port it to other ROMs.But here is a tip.Look at my signature.I'm using JellyBam ROM and Chameleon ROM at the same time with Dual Booting via Dori kernel.I use Chameleon only for MHL,and it's working.And BTW,kernel has nothing to do with the MHL.
Click to expand...
Click to collapse
Thanks for your answer! Sounds like a good idea. I've never used dualboot before, but I'll give it a try.
Do both ROMs share personal stuff? Or do you just turn off sync in one of them? I think I don't want to install two ROMs with all the apps and settings. Just a plain Chameleon would be enough for using it with MHL once in a while.
m4zzic said:
Thanks for your answer! Sounds like a good idea. I've never used dualboot before, but I'll give it a try.
Do both ROMs share personal stuff? Or do you just turn off sync in one of them? I think I don't want to install two ROMs with all the apps and settings. Just a plain Chameleon would be enough for using it with MHL once in a while.
Click to expand...
Click to collapse
No,they don't share the apps nor the documents.I use Chameleon ROM only for games(I have instll NFS,GTA,Asphalt,Cut the Rope,etc),and MHL,because I sometimes want to put a video on TV,and share it with my friends.And I use JellyBam.This is my main ROM.Here I have the docs,and stuff like that.But I warn you! The second ROM is 2 GBs in size,without any apps installed.Just watch your space.
Hi guys,
sorry for cross-posting (http://forum.xda-developers.com/xperia-neo/help/xperia-pro-issue-mount-sd-ext-t2826503) but
my phone is becoming unstable because of very low free space/memory available
and did not receive answers.
Thank you very much!
Hi eXperts,
last month I flashed the great Ultimate HD rom, so stable and now my wonderful Xperia pro is much faster
Before to do that anyway I used Mount2SD app to get my external sd mounted and solve, in this way,
common issue about "memory unavailable" and similars when I tried to add or update an app.
Now , Mount2SD is no more working, with no log entries, even if detailed debug verbose is enabled; first
I was thinking there is issue with Init.d support... But it sounds strange because before UHD I used the original stock rom by sony,
rooted of course, and furthermore I checked with a tool (embedded inside universal Init.d) and it shows me that Init.d support
is green and working....
So, looking beyond, my question is how to definitively solve this issue, changing kernel or something else
and give my phone support to mounting external sd native. Which kernel may I flash ? Working together with UHD?
Fast?
My phone is mk16i and must keep physical keyboard working, cwm, rooted.
Will this operation break my current configuration in terms of installed apps and so on?
My Xperia pro is unlocked bootloader.
Thank you very much in advance!!
Click to expand...
Click to collapse
XperiaPro55 said:
Hi guys,
sorry for cross-posting (http://forum.xda-developers.com/xperia-neo/help/xperia-pro-issue-mount-sd-ext-t2826503) but
my phone is becoming unstable because of very low free space/memory available
and did not receive answers.
Thank you very much!
Click to expand...
Click to collapse
Hi guys, no one could support ? Are all the guru on vacation :crying::crying:?
I am trying to understand which kernel is currently updated and if it's ok for my phone but I still get no success!
Help me please!
Thanks!!
XperiaPro55 said:
Hi guys, no one could support ? Are all the guru on vacation :crying::crying:?
I am trying to understand which kernel is currently updated and if it's ok for my phone but I still get no success!
Help me please!
Thanks!!
Click to expand...
Click to collapse
1. Try flashing stock GB/ICS
2. Try using a different sd card
That's basically all you can do. If you're doing everything right (flashing and wiping accordingly) and it still doesn't work, it's definitely a hardware problem. Then you'll need to pin point what is causing the problem.As I recall you said that your sd card works properly? Can you can copy/move stuff from and to it, view all the media you have on it without problems?
Grof87 said:
1. Try flashing stock GB/ICS
2. Try using a different sd card
That's basically all you can do. If you're doing everything right (flashing and wiping accordingly) and it still doesn't work, it's definitely a hardware problem. Then you'll need to pin point what is causing the problem.As I recall you said that your sd card works properly? Can you can copy/move stuff from and to it, view all the media you have on it without problems?
Click to expand...
Click to collapse
Hi Grof,
flashing stock GB/ICS does not help. I use stock kernel since the beginning... and no stock kernel
is able to mount sd-ext file system in order to use sd as a natural extension of internal memory.
As I wrote in the beginning I already reached out result I want, using Mount2Sd with stock kernel but now
I want to solve with a new full featured and modded kernel that embeds useful functionality just like CWM and
of course internal memory extension using sd-ext filesystem..
That's the point.
My sd card is perfect, nothing to complain and working like a charm! I "only" need the first part.
Regards
If I get what you are saying, you just want someone to recommend you a custom kernel that has sd-ext support? Have you tried the latest LX CM11 ROM and kernel? Almost all custom kernels support ext4, it's just a matter of preference.
Sorry if I missed your point, hope I haven't misunderstood you.
Grof87 said:
If I get what you are saying, you just want someone to recommend you a custom kernel that has sd-ext support? Have you tried the latest LX CM11 ROM and kernel? Almost all custom kernels support ext4, it's just a matter of preference.
Sorry if I missed your point, hope I haven't misunderstood you.
Click to expand...
Click to collapse
Great! That's the point :good:
Now, I did not try LX CM11 ROM because I did not know which was the best ROM and Kernel for my mk16i and so
reading different threads I decided to install Ultimate HD ROM.
That's a good ROM but I did not know which kernel associate because it was not indicated in its dedicated thread
and furthermore, mk16i is a really specific smartphone with physical keyboard so I did not want to loose some important feature.
I will try to look at LX CM11 ROM but are you able to suggest a good kernel for my current ROM ?
I am honest, if possible I would not want to install all apps from the beginning... but if the reward is sensible, well I will do!
Thanks
XperiaPro55 said:
Great! That's the point :good:
Now, I did not try LX CM11 ROM because I did not know which was the best ROM and Kernel for my mk16i and so
reading different threads I decided to install Ultimate HD ROM.
That's a good ROM but I did not know which kernel associate because it was not indicated in its dedicated thread
and furthermore, mk16i is a really specific smartphone with physical keyboard so I did not want to loose some important feature.
I will try to look at LX CM11 ROM but are you able to suggest a good kernel for my current ROM ?
I am honest, if possible I would not want to install all apps from the beginning... but if the reward is sensible, well I will do!
Thanks
Click to expand...
Click to collapse
Asking for and suggesting best kernel/ROM is not allowed on xda.
http://forum.xda-developers.com/showthread.php?t=1969555
You'll just have to test them out yourself. You should check UHD ROM thread to see which kernels are compatible with that ROM. All CM ROMs have kernels inside the zip (boot.img). Hope you'll find what you are looking for!
Grof87 said:
Asking for and suggesting best kernel/ROM is not allowed on xda.
http://forum.xda-developers.com/showthread.php?t=1969555
You'll just have to test them out yourself. You should check UHD ROM thread to see which kernels are compatible with that ROM. All CM ROMs have kernels inside the zip (boot.img). Hope you'll find what you are looking for!
Click to expand...
Click to collapse
Hi, I know the rules.
I am asking if you can help me understand which ROM is ready for UHD cause, of course, I already read the post and found
different suggestions but regarding other models. That's the point, because Xperia Pro is a particular phone with physical keyboard for e.g.
and also looking at different kernels inside its dedicated thread I was not able to understand which kernel is already developed
and patched on ICS and there is features matrix.
Finally I need to know if, installing selected kernel, I will loose something or not
I am not interested and I am not asking "which is the best rom for my phone ?"
Bye