Here is a thread for the official CM10.1.
Here is where to get it
http://get.cm/?device=tf201
demercie said:
Here is a thread for the official CM10.1.
Here is where to get it
http://get.cm/?device=tf201
Click to expand...
Click to collapse
come on guys animate this thread,news about autorotation?
---------- Post added at 10:50 PM ---------- Previous post was at 10:46 PM ----------
pit84 said:
come on guys animate this thread,news about autorotation?
Click to expand...
Click to collapse
demercie this thread is a good idea because alle the guys post on the unofficial builds threads when i have a news about the mayor fix of the nightly i post here thanks
I've been running the last of the UNofficial 10.1 nightlies, dated May 22. Other than no autorotation, it seems to run just fine. Once the Official nightlies started a few weeks ago, I jumped in and flashed a few, up to the 0629 nightly. In addition to the autorotation issue, suddenly my dock battery is not recognized, and I have (apparently already known) issues where both external SD cards are not recognized, on the device or in Windows. Checking the changelogs, I note that there have been HUGE changes/additions in the last few nights, so I figured I'd try the July 4 nightly. BIG effing mistake, UI crashes immediately, multiple error mesages, and I could barely get back to TWRP to restore my faithful 0522 Unofficial.
Thoughts on why the unofficial build works fine, but the "official" ones don"t? What could I be doing wrong?
Thx...
jp071848 said:
I've been running the last of the UNofficial 10.1 nightlies, dated May 22. Other than no autorotation, it seems to run just fine. Once the Official nightlies started a few weeks ago, I jumped in and flashed a few, up to the 0629 nightly. In addition to the autorotation issue, suddenly my dock battery is not recognized, and I have (apparently already known) issues where both external SD cards are not recognized, on the device or in Windows. Checking the changelogs, I note that there have been HUGE changes/additions in the last few nights, so I figured I'd try the July 4 nightly. BIG effing mistake, UI crashes immediately, multiple error mesages, and I could barely get back to TWRP to restore my faithful 0522 Unofficial.
Thoughts on why the unofficial build works fine, but the "official" ones don"t? What could I be doing wrong?
Thx...
Click to expand...
Click to collapse
Did you wipe before installing? I know its CM to CM but like you said there have been lots of changes. If it still crashes then it's probably effed for the moment.
jp071848 said:
I've been running the last of the UNofficial 10.1 nightlies, dated May 22. Other than no autorotation, it seems to run just fine. Once the Official nightlies started a few weeks ago, I jumped in and flashed a few, up to the 0629 nightly. In addition to the autorotation issue, suddenly my dock battery is not recognized, and I have (apparently already known) issues where both external SD cards are not recognized, on the device or in Windows. Checking the changelogs, I note that there have been HUGE changes/additions in the last few nights, so I figured I'd try the July 4 nightly. BIG effing mistake, UI crashes immediately, multiple error mesages, and I could barely get back to TWRP to restore my faithful 0522 Unofficial.
Thoughts on why the unofficial build works fine, but the "official" ones don"t? What could I be doing wrong?
Thx...
Click to expand...
Click to collapse
yes,well i have this bug in my official nightly but is really soon for a stable build and the developers release one build for day let them operate.i think 1 or 2 moins and the big issues are solved
shuwoo said:
Did you wipe before installing? I know its CM to CM but like you said there have been lots of changes. If it still crashes then it's probably effed for the moment.
Click to expand...
Click to collapse
Sort of. I did do a number of cache wipes, but I admit I never did do a full wipe/ factory reset. I also note on other forums that the early July Nightlies are causing others some of the same crashes I saw, so I guess I'm not alone. We'll have to be patient
Aren't the Unofficial builds a port of the TF300 or TF700 builds? It would definitely account for the fact we're starting all over with features on the nightly builds as this would be a completely new tree starting from the ground up on inclusion of feature sets as the build comes together.
Been running the nightly for a few days now and it's been just fine for me. Of course, I did start off the entire 10.1 journey with a total wipe first.
BUILD cm-10.1-20130701-NIGHTLY-tf201
A couple obvious missing features to point out for those who may be just getting to this:
Auto-rotate not working
Dock/Keyboard battery not recognized
Function buttons on the keyboard not recognized (obviously)
Loading up the 0706 Nightly right now so I'll run through the motions later and give a more detailed outline of things I notice.
---------- Post added at 10:22 AM ---------- Previous post was at 09:43 AM ----------
OK, cm-10.1-20130706-NIGHTLY-tf201 should be avoided.
When it comes up it immediately starts throwing System UI failures. Had to force power off and go into recovery mode in order to gain control.
Last known good for me was cm-10.1-20130701-NIGHTLY-tf201 so I rolled back to that from TWRP. Considering it's reported that this issue appears on the 0704 as well, I figured it was safest to go back that route for now.
I think I'll give it a few days before trying another build and just keep an eye on the builds to see if anything significant changes to resolve this.
For now, 20130701 is the most stable that I'm aware of. Perhaps someone else can chime in if they are running anything newer successfully.
tsvortex said:
Aren't the Unofficial builds a port of the TF300 or TF700 builds? It would definitely account for the fact we're starting all over with features on the nightly builds as this would be a completely new tree starting from the ground up on inclusion of feature sets as the build comes together.
Been running the nightly for a few days now and it's been just fine for me. Of course, I did start off the entire 10.1 journey with a total wipe first.
BUILD cm-10.1-20130701-NIGHTLY-tf201
A couple obvious missing features to point out for those who may be just getting to this:
Auto-rotate not working
Dock/Keyboard battery not recognized
Function buttons on the keyboard not recognized (obviously)
Loading up the 0706 Nightly right now so I'll run through the motions later and give a more detailed outline of things I notice.
---------- Post added at 10:22 AM ---------- Previous post was at 09:43 AM ----------
OK, cm-10.1-20130706-NIGHTLY-tf201 should be avoided.
When it comes up it immediately starts throwing System UI failures. Had to force power off and go into recovery mode in order to gain control.
Last known good for me was cm-10.1-20130701-NIGHTLY-tf201 so I rolled back to that from TWRP. Considering it's reported that this issue appears on the 0704 as well, I figured it was safest to go back that route for now.
I think I'll give it a few days before trying another build and just keep an eye on the builds to see if anything significant changes to resolve this.
For now, 20130701 is the most stable that I'm aware of. Perhaps someone else can chime in if they are running anything newer successfully.
Click to expand...
Click to collapse
Thanks for the confirmations. And yes, as you indicate, the Unofficials are built on the TF700. I did a complete wipe/reset etc and then tried the 0701 that seems to work fine, but I ran into the same problems. In addition to the three issues noted above, I continue to have no access to either of the external SD cards, which for me is a show-stopper. I'll have to stick with the 0522 Unofficial for a while, at least it's fully functional for me..
jp071848 said:
Thanks for the confirmations. And yes, as you indicate, the Unofficials are built on the TF700. I did a complete wipe/reset etc and then tried the 0701 that seems to work fine, but I ran into the same problems. In addition to the three issues noted above, I continue to have no access to either of the external SD cards, which for me is a show-stopper. I'll have to stick with the 0522 Unofficial for a while, at least it's fully functional for me..
Click to expand...
Click to collapse
I've got nothing better to do than blow up my tab every few days so I'll keep posting up results when I do, lol.
The latest nightly has a force close on System UI. I even wiped EVERYTHING and did a clean install... Same thing. Going back one night, and things should be just fine!
Micro SD card isn't working yet, but this is just a nightly... I'm not worried about it.
HDMI out is working, so that's awesome!
Thanks for testing the unofficial editions. I think it will be better soon!
I m using the app "rotate" to make the table force rotate. It will be useful in the unofficial roms.
Sent from my Galaxy Nexus using xda premium
07032013 build OK. July 4th and after give the FC's.
Sent from my EPAD using Tapatalk HD
mm284781423 said:
Thanks for testing the unofficial editions. I think it will be better soon!
I m using the app "rotate" to make the table force rotate. It will be useful in the unofficial roms.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
post a link for this app?Thanks
2013/07/08 build still has UI crashes.
Is there anyone from the CM team watching this thread? If there is I will gladly post a logcat when I get the chance.
nexwave-mat said:
Is there anyone from the CM team watching this thread? If there is I will gladly post a logcat when I get the chance.
Click to expand...
Click to collapse
Post, and I'll see what I can do...
Auto-rotate and the dock stuff is already in the review process.
who have tested the 08\07 nighly? FC?
Me. With Clean install
Sent from my Galaxy Nexus using xda app-developers app
atoyu said:
Me. With Clean install
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
And ? Any UI crash issues ? sd-card ? rotate ?
demercie said:
And ? Any UI crash issues ? sd-card ? rotate ?
Click to expand...
Click to collapse
@atoyu
so what?
The SystemUI was on my nexus 4 too... and I experienced it on this so here is the commits they shared in the nexus4 thread to fix it... if it helps or if anyone reads these...
BTW I have no idea if these really are the culprit but thats what they gave us in the n4 thread
http://review.cyanogenmod.org/#/c/45076/
and possibly
http://review.cyanogenmod.org/#/c/45102/
although not sure about that one...
Sent from my EPAD using xda app-developers app
Related
CM9 Nightly for Prime now available...has anyone tried this yet? I'm tempted to give it a whirl, but may wait for braver souls to give it a try first and report their findings...
http://cm-nightlies.appspot.com/?device=tf201
All the d/l links on the page http://download.cyanogenmod.com/?device=tf201 seem to be broken atm
you're right...didn't try that before posting that it was available. With the recent announcements of nightlies being available for other devices, probably just a matter of time before they get to us
Old news... been up for well over a month now.
Sent from my CM7 Atrix 4G
The date of the new build is for the 29th, its 12.33am on the 30th here in Australia. I hope they merged the 4.0.4 AOSP code into it.
I'll be back in 8 hours after a snooze, it would be sweet if the links were fixed by then. I've been hanging for cm to update the tf201 nightlies. The one before yesterdays was just under a month ago..
Swiftks said:
Old news... been up for well over a month now.
Sent from my CM7 Atrix 4G
Click to expand...
Click to collapse
dude, there's a new build for the 29th...
All I am hoping for is that the keyboard dock at least works. Like, no soft keyboard pops up on dock use. If it has that, I have a new DD for my TF201.
qubz said:
The date of the new build is for the 29th, its 12.33am on the 30th here in Australia. I hope they merged the 4.0.4 AOSP code into it.
I'll be back in 8 hours after a snooze, it would be sweet if the links were fixed by then. I've been hanging for cm to update the tf201 nightlies. The one before yesterdays was just under a month ago..
Click to expand...
Click to collapse
Not correct... the change log has been there, but not a download link.
*sorry-meant to quote the other post by swiftks*
Sent from my SGH-I897 using xda premium
Any update on this? Really excited about getting CM onto my new Prime
thanks to Koush and twitter here is a working mirror for cm nightlies. sorry if this is old news already.
pretty sure i can't post links so you'll have to fill in the gap(p)s ;P
jenkinsmanifest (.) clockworkmod (.) com/device/tf201
installed and booted. sick animation. like butta
[Edit] this begins running at 1.2ghz. using the cpu_overclock.bin from the TFP AOKP section by Jermaine cranks it up to 1.6...aaaand now it's perfect...really running great so far. minor market issues with compatibility but that's about all I can find. anything to look out for/test??
qubz said:
dude, there's a new build for the 29th...
Click to expand...
Click to collapse
Sorry, was just responding to what was in the OP, "CM9 now available..."
Well the first 2 builds have been available for a while now; the second of which flashes just fine, but has a lot of hangups.
Sent from my CM7 Atrix 4G
Woot! Downloading now. Will report back when up and running!
Could someone please point me to the install instructions?
Hairyhippy said:
Could someone please point me to the install instructions?
Click to expand...
Click to collapse
are you rooted, unlocked and running the latest CWM recovery?
if so, take my first post, fill in the gaps for the link to the direct CM server, download the rom. transfer rom and latest ICS gapps (3/17) to your internal storage. boot into recovery, wipe, flash.
These seem to be working.
http://get.cm/?device=tf201
Hairyhippy said:
Could someone please point me to the install instructions?
Click to expand...
Click to collapse
Just like flashing any other rom:
Unlock bootloader
Install CWM Recovery
Nandroid Backup
Wipe data/factory reset & dalvik wipe in CWM
Flash CM9 zip
Flash latest ICS Gapps version
Reboot
Sent from my CM7 Atrix 4G
Does this ROM have Cornerstone working yet? I've been hearing rumblings of CM9 having Cornerstone baked into the mix.
ZebTheCalvinist said:
Does this ROM have Cornerstone working yet? I've been hearing rumblings of CM9 having Cornerstone baked into the mix.
Click to expand...
Click to collapse
Its been decided that we won't use Cornerstone for the foreseeable future. The underlying implementation is not flexible and needs a lot of work.
It is 4.0.4. I forgot to get GAPPS before flashing, so Im downloading that now. It looks to be very AOSP right now. Will update in a minute
Edit- Having a issue with WiFi. I set it up and it works fine. I restart the tablet and it cannot connect and is stuck at "Turning on Wireless". Rebooting again has no effect. Toggling Airplane mode also has no effect.
Edit 2- Dock is working like it does with the AOKP- volume, lock, media, back button, and browser work, the other shortcut keys dont. It charges from the dock. Cameras work fine. Brightness works, but no IPS switch (duh). Overall, very promising! I hope the nightlies continue!
dalingrin said:
Its been decided that we won't use Cornerstone for the foreseeable future. The underlying implementation is not flexible and needs a lot of work.
Click to expand...
Click to collapse
dalingrin- you dev'ing for the Transformer Prime? Loved your work on the Nook Color!
Paranoid Android 3 now out for Nook Tablet. http://iamafanof.wordpress.com/2013/02/14/paranoidandroid-aospa-3-jb-4-2-2-for-nook-tablet-0214/ . iamafanof aka (succulent) takes all credit
Update Feb. 26 - http://goo.im/devs/succulent/acclaim/paranoidandroid/internal/pa_acclaim_3.10_26FEB2013_10_HD.zip
-Repo synced 3.10
-Removed Trebuchet due to some issues
-fixed rotation problem
-fixed screenshot problem
Update Feb. 23 - http://goo.im/devs/succulent/acclaim/paranoidandroid/internal/pa_acclaim_3.00_23FEB2013_12_HD.zip
-Repo synced
-kernel updated to 3.0.66
-compiled with GCC 4.7
-look at the PA source history for further changes.
Original Release - http://goo.im/devs/succulent/acclaim/paranoidandroid/internal/pa_acclaim-3.00-14FEB2013-09-HD.zip
More of his great work is in my post on page 3 . CM7.2, CM10, CM10.1 (4.2.1), and CM10.1 (4.2.2) http://forum.xda-developers.com/showthread.php?t=2148878&page=3
Looks great. Especially tablet modes and all the customizability.
Ik right and this is just his first port for it. Imagine what the updates will be like. (If there be any)
Anyone tested it? Is it more stable then AOSP and CM 10.1? What kernel does it run?
AOSPA is a nice little move from the occasional CM and AOSP. And don't get hopes up yet, it's still on 3.0.63
homen3 said:
Anyone tested it? Is it more stable then AOSP and CM 10.1? What kernel does it run?
Click to expand...
Click to collapse
After testing it for a few days, I can tell you some of the problems I came across. When rotating between landscape and potrait I experience a little screen lag but nothing serious. Everything else seems to work perfect even the pie style bar and dpi settings in settings.
Edit: Oh, forgot to say that I dont think 10 touch work. I have the firmware installed but it only see's up to 4 fingers.
This doesn't work with the 8gb nook, it just shows a blank screen after the cyanogenmod boot so therefore I don't think it's compatible with 8gb nook and I would appreciate and others too would appreciate if they had instructions on here or compatibility with certain devices so users know what they are downloading.
OsmanMusa said:
This doesn't work with the 8gb nook, it just shows a blank screen after the cyanogenmod boot so therefore I don't think it's compatible with 8gb nook and I would appreciate and others too would appreciate if they had instructions on here or compatibility with certain devices so users know what they are downloading.
Click to expand...
Click to collapse
Thankz for sharing this. I have the 16gb version and works great. I didn't know the 8gb and 16gb was so different besides the ram and memory.
how can I boot it from SD? My nt is cwm-looped and it doesn't boot any system until now. I would to try using this one from SD. Any idea?
homen3 said:
how can I boot it from SD? My nt is cwm-looped and it doesn't boot any system until now. I would to try using this one from SD. Any idea?
Click to expand...
Click to collapse
Here's a link to fix your problem: https://docs.google.com/file/d/0BwFA9QwlHuiIUEJrM19RaFJBMk0/edit?pli=1 Flash in Recovery
And Make sure to install a CM or AOSP Build and Gapps
Thankz to iamafanof
Added the Update Link to first post. . Changelog is on his site though.
homen3 said:
how can I boot it from SD?
...
Click to expand...
Click to collapse
See http://forum.xda-developers.com/showpost.php?p=36685310&postcount=1, but in steps 4 &5 use PA ROM and Gapps files with "-SDC.zip" suffix from http://iamafanof.wordpress.com/2013/02/14/paranoidandroid-aospa-3-jb-4-2-2-for-nook-tablet-0214/.
Has any one else had troubles backing up the ROM in cwm. I get an error for the boot image when i try.
Sent from my LG-P920 using xda app-developers app
I've been using it for about a day at home and it works great so far. I am able to stream youtube directly to my smart tv and hbo go works great on the tablet. havent tried netflix yet. play store works too, loving jelly bean so far.
however, the rotation bug (it shows deformed graphics for a second, then rotates the screen) is really annoying. it kinda kills the fluidness of the OS for me. I am gonna try CM10 i think before i decide what works best. I really wish he fixed the screen orientation switching bug. I'd donate if it led to such a fix.
postulio said:
I've been using it for about a day at home and it works great so far. I am able to stream youtube directly to my smart tv and hbo go works great on the tablet. havent tried netflix yet. play store works too, loving jelly bean so far.
however, the rotation bug (it shows deformed graphics for a second, then rotates the screen) is really annoying. it kinda kills the fluidness of the OS for me. I am gonna try CM10 i think before i decide what works best. I really wish he fixed the screen orientation switching bug. I'd donate if it led to such a fix.
Click to expand...
Click to collapse
Ikr. If it wasn't for that rotation bug, I would me all over it.
One thing I have noticed. The graphics are more clearer and better on this Rom than the others.
Kir6y said:
One thing I have noticed. The graphics are more clearer and better on this Rom than the others.
Click to expand...
Click to collapse
what others have you tried? i have to admit i have just dusted off my NT after a year or so of neglect. I only put the PA3 on it so far, was gonna try to flash SGT7+CM10.1 tonight, should i bother? is there any ROM you recommend?
I do love the clarity of the images when using PA3 (i have no idea if they will differ on others).
billy8362 said:
Has any one else had troubles backing up the ROM in cwm. I get an error for the boot image when i try.
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
Yes. I have experienced the exact same issue with the newest CWM 6.xxx and TWRP recovery. No idea why though.
postulio said:
what others have you tried? i have to admit i have just dusted off my NT after a year or so of neglect. I only put the PA3 on it so far, was gonna try to flash SGT7+CM10.1 tonight, should i bother? is there any ROM you recommend?
I do love the clarity of the images when using PA3 (i have no idea if they will differ on others).
Click to expand...
Click to collapse
SGT7+CM10.1 is worth the try... its quite stable!
postulio said:
what others have you tried? i have to admit i have just dusted off my NT after a year or so of neglect. I only put the PA3 on it so far, was gonna try to flash SGT7+CM10.1 tonight, should i bother? is there any ROM you recommend?
I do love the clarity of the images when using PA3 (i have no idea if they will differ on others).
Click to expand...
Click to collapse
Try this http://goo.im/devs/succulent/acclaim/paranoidandroid/internal/pa_acclaim-2.99.1-17JAN2013-16-HD.zip .
This Paranoid Android 2.99+. Everything seems the same except for PIE is not in.
It appears there is a new CM on the way... And it appeared it wasn't available for the Note 2... And that made me disappointed, so I set out to put that right.
4.3 is a small update from 4.2. Unfortunately, Google also decided to change almost everything about filesystem mounting. And Samsung exynos devices are a hotchpotch of everything...
Today, xplodwild and I carried out a war of attrition against the nasty Samsung devices. Firstly, there remains a battle-scar in the form of graphics, where we had to disable the ability of the device to screenshot itself. You'll see this in the lack of thumbnails for your long-press-home task switcher. #Blame-Samsung
Storage was a nightmare, but I have finally beaten it into submission. It should now work. Nicely. And properly. At least for now.
Because open source is wonderful, a VERY messy device tree (commits need squashed etc) - https://github.com/pulser/android_device_samsung_n7100/
I suggest a wipe before flashing, but I have tested from 4.2.2 and should be OK actually, maybe some apps will cry, but that's not my problem
Link: http://goo.im/devs/pulser/N7100/CM/cm-10.2-20130810-UNOFFICIAL-n7100.zip
Pretty much everything is working and tested - you shouldn't have any issues getting it to boot. The other version posted appears it may have issues booting, but I was not aware of its existence until just now. Actually, seems there's no link in the other thread, give this a shot, and see if it helps you. There's a lot of issues on Exynos devices when doing any kind of update... Sneeze and it might explode!
XDA:DevDB Information
Unofficial CM 10.2 for Galaxy Note II (N7100), a ROM for the Samsung Galaxy Note II
Contributors
pulser_g2, CM Team
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.0.x
Based On: CM 10.2
Version Information
Status: Alpha
Current Stable Version: N/A
Current Beta Version: 10 August
Beta Release Date: 2013-08-10
Created 2013-07-30
Last Updated 2013-08-10
Thanks,
Trying now and will report.
BTW (off-topic but... I believe necessary when it comes to AOSP and Exynos) When I click on your githup link the Audio recording fix is on top of the list for 6 months ago, which reminds me; we have never got the chance to see CM 10.1 recording audio properly on videos or sound record apps (not saying it is mono but the sound is terrible actually).. For now it seems the only thing that prevents me (and some others I guess) from using any AOSP ROM as a daily and "fully functional" driver is this problem. Any chance that we can see 10.2 have proper audio recording? Since our voice is recorded just fine on calls we can say the mic is working as it should on both at earspeaker and the loudspeaker. So, there is a software which can use the mics properly and I -with all my heart and never-ending hope- believe this software could be also used for good sounded video recording or help us not to shout too much for Google Now
Thanks for reading. And the ROM
---------- Post added at 01:06 AM ---------- Previous post was at 12:43 AM ----------
It boots just fine. So is everything so far.
works without a hitch. no bootloop nothing. simply booted up and worked. Huge thanks for that PulserG2 and xplodwild =)
Will try this new one tomorrow... Thanks!
BTW. Is anyone using GoBackup Pro or Titanium Backup? I had an issue on my Nexus 4 running 4.3 .
They didn't restored my Apps. Since the Note 2 uses a SD Card Slot, would it be the same issue?
Gesendet von meinem GT-N7100 mit Tapatalk HD
lolmensch said:
works without a hitch. no bootloop nothing. simply booted up and worked. Huge thanks for that PulserG2 and xplodwild =)
Click to expand...
Click to collapse
Awesome. Was pretty sure I had fixed it properly, but always good to check
Downloading and trying it right now I'll be giving a feedback
Sent from my GT-N7100
Eric-Mod said:
Will try this new one tomorrow... Thanks!
BTW. Is anyone using GoBackup Pro or Titanium Backup? I had an issue on my Nexus 4 running 4.3 .
They didn't restored my Apps. Since the Note 2 uses a SD Card Slot, would it be the same issue?
Gesendet von meinem GT-N7100 mit Tapatalk HD
Click to expand...
Click to collapse
No issues, my testing process includes restoring from titanium backup, with data, from external SD
_delice_doluca_ said:
Thanks,
Trying now and will report.
BTW (off-topic but... I believe necessary when it comes to AOSP and Exynos) When I click on your githup link the Audio recording fix is on top of the list for 6 months ago, which reminds me; we have never got the chance to see CM 10.1 recording audio properly on videos or sound record apps (not saying it is mono but the sound is terrible actually).. For now it seems the only thing that prevents me (and some others I guess) from using any AOSP ROM as a daily and "fully functional" driver is this problem. Any chance that we can see 10.2 have proper audio recording? Since our voice is recorded just fine on calls we can say the mic is working as it should on both at earspeaker and the loudspeaker. So, there is a software which can use the mics properly and I -with all my heart and never-ending hope- believe this software could be also used for good sounded video recording or help us not to shout too much for Google Now
Thanks for reading. And the ROM
---------- Post added at 01:06 AM ---------- Previous post was at 12:43 AM ----------
It boots just fine. So is everything so far.
Click to expand...
Click to collapse
This sounds like something more for the guys that did the work on the audio HAL. I've not looked into the solution, but audio on these devices is a dirty hack with tinyhal
there are some occasional rendering glitches with the stock browser while loading a page and scrolling through. nothing majorly bad but still visible at times.
(independent of the webpages i visited)
despite that I didn't come across any other bugs. once again great job :good:
finally glad to see the update in our devices thank you guys
Sent from my GT-N7100 using xda premium
Re 4.3 in general
I have been testing 4.3 on an "old" device , my Nexus S, the last couple of days. Interestingly, the device was much smoother than 4.2 based ROMs, at least on that limited processor device.
Once this all gets ironed out is there reason to believe that 4.3 will be better for our Note 2's?
Thanks for your work !
jcrompton said:
I have been testing 4.3 on an "old" device , my Nexus S, the last couple of days. Interestingly, the device was much smoother than 4.2 based ROMs, at least on that limited processor device.
Once this all gets ironed out is there reason to believe that 4.3 will be better for our Note 2's?
Thanks for your work !
Click to expand...
Click to collapse
It really depends on your use cases...
I can make the fastest and most cutting edge android phone lag like crazy without installing anything silly...
I just need to type at my full speed on SwiftKey for about a minute and it will be lagging pretty horrendously. That's a bad app - SwiftKey is very poor lately for performance.
Why do I mention this? Well, your definition of better or smoother will really depend on what you are doing. Android is a horrendously complex operating system. It is ridiculously inefficient in many ways such as how data is presented to the user.
As such there are many badly written apps which will slow down your device. I reckon unless Google considers using native code for drawing the screens, we will never reach the true smoothness the hardware is capable of.
At the end of the day, a particular apple phone is available with lesser processor, graphics and RAM. Yet it offers smoother in-use performance because of its use of native code where possible, rather than a virtual machine based language like java.
I don't think it seems significantly faster than 4.2, but I probably am hard to please. I simply despair as I look at the code in android... All the nasty object orientation and strange ways to to things... Each and every time it happens, the java virtual machine must run instructions.
I reckon if you reduced the number of lines of code used to achieve simple tasks like show the settings menu (which is horrendous with resources in countless files and java classes), performance would be vastly superior.
Probably not much of an answer, but if anyone else is irritated by the horrendously inefficient code in android, I've finally found someone else who sees it!
That actually helps a lot. I think the processor and the device makes a difference too with the Nexus S being a "Google" device and the Note 2 being Samsung.
I just notice that when browsing Tapatalk that seems to be my main gauge - the scrolling seemed pretty smooth even on the Nexus S.
I read in the Nexus thread that the 4.3 code was written to run with less sytem resources but I wasn't sure of the source of that comment.
---------- Post added at 09:11 PM ---------- Previous post was at 08:45 PM ----------
IF YOU LOSE ROOT WHEN INSTALLING 4.3
I lose root when I install this ROM but if you will flash the newest update from Chainfire you will re gain
http://download.chainfire.eu/344/SuperSU/UPDATE-SuperSU-v1.50.zip
That's amazing!!! great help and flashing now!
update: AOSP keyboard having FC
everything else within expectations. no problem with using the ROM so far!
amazing amazing effort and feels like 95% finished product!
Gapps?
Thanks for bringing 4.3 for Note 2. Are the official CM10.2 gapps compatibile with this ROM?
vishnu8058 said:
Thanks for bringing 4.3 for Note 2. Are the official CM10.2 gapps compatibile with this ROM?
Click to expand...
Click to collapse
http://goo.im/devs/kashamalaga/gapps4.3/gapps-jb-4.3-20130726.zip
Inviato dal mio GT-N7100 con Tapatalk 2
I want 2 try this but i read someone lose the root of his phone... Some other people also that problem?
Sent from my Galaxy Note II using xda app-developers app
gamesz2 said:
I want 2 try this but i read someone lose the root of his phone... Some other people also that problem?
Sent from my Galaxy Note II using xda app-developers app
Click to expand...
Click to collapse
You loss the root, HOWEVER, If you read that guy's post, he Said flash that file and you'll get root..
Im other words,
1. Flash CM10.2
2. Flash Gapps
3. Flash the file from the previous post
Sent from my GT-N7100
Mohammed779 said:
You loss the root, HOWEVER, If you read that guy's post, he Said flash that file and you'll get root..
Im other words,
1. Flash CM10.2
2. Flash Gapps
3. Flash the file from the previous post
Sent from my GT-N7100
Click to expand...
Click to collapse
thanks! i flashed the 10.2 with the older official gapps... nothing seems to be wrong with it and everything is working
do you know what is new with the latest GApps as attached a few posts above?
Flashed it, and it's working good. For the 1st Build it's working quite fine. But the camera (app?) isn't working properly. I took one pic, the camera froze, and when I launched the camera again, it said "No connection to camera".
It's the first build so yeah.. this can happen of course
[ROM][Unofficial][5.0.2] CyanogenMod 12.0 [1-1-2015]
CyanogenMod 12.0 Unofficial
For the HTC EVO LTE 4G (jewel)
Requirements
You need to be on the new partition layout, have S-OFF, and have Captain_Throwback's TWRP recovery.
Installing
Download the ROM.
Download GAPPS if you want them (make sure they are for the right version of Android).
Boot into recovery.
Wipe system and data.
Install the ROM.
If you wanted GAPPS install them.
Wipe cache and dalvik cache.
Reboot (this will take a while).
Have fun!
Bugs
The notification sound will not change. This may also apply to the ringtone.
As far as I know everything else seems to work. I don't have service on this phone so for data and phone calls and such I cannot say. If anything else doesn't work let me know.
Sources
ROM
Kernel
Downloads
ROM: Next post.
GAPPS
Official nightly builds are now available here.
Why did you put this under the other CM 12 Unofficial thread? That really should be what you do, or we'll have duplication of discussion. He does have a place in post 2 reserved for partner builds.
ocarinaz64 said:
Why did you put this under the other CM 12 Unofficial thread? That really should be what you do, or we'll have duplication of discussion. He does have a place in post 2 reserved for partner builds.
Click to expand...
Click to collapse
Initially he did exactly that. Then a one of the mods deleted half a dozen posts. Take a look at the mods post in the other thread.
Since the other poster moved on, it's probably best anyway. That way he can update the build dates.
ok, so my brother has a flakey 4g lte. I tried to refresh his phone to stock and he still seems to have some issues.
I would like to throw a custom build on there and I think this would be a great one. He has never been rooted, has taken all the latest OTAs, etc and is S-ON. So... what the best S-OFF to use for the latest firmware one? I am guessing rumrunner? Then from there, TWRP recovery I see is required, but it also says use the new partition layout. Is that the F2FS?
Also, does this rom come with the easy CM updater? Or are they all manual for now?
Thanks.
edufur said:
ok, so my brother has a flakey 4g lte. I tried to refresh his phone to stock and he still seems to have some issues.
I would like to throw a custom build on there and I think this would be a great one. He has never been rooted, has taken all the latest OTAs, etc and is S-ON. So... what the best S-OFF to use for the latest firmware one? I am guessing rumrunner? Then from there, TWRP recovery I see is required, but it also says use the new partition layout. Is that the F2FS?
Also, does this rom come with the easy CM updater? Or are they all manual for now?
Thanks.
Click to expand...
Click to collapse
Is the bootloader unlocked? If not, that's what needs to be done prior to getting S-Off.
Rumrunner should work just fine.
You really need to read and follow the instructions in this thread
http://forum.xda-developers.com/showthread.php?t=2639180
Captain Throwback has done some amazing work and has significantly extended the useful life of our devices. You'll need to use his TWRP too. Nothing else will work.
Hope this helps.
New build.
New build. Sorry it took a while, I was having trouble getting it to build and I just ended up downloading the sources fresh. I'm going to be RMAing my motherboard after Christmas because it currently works with only a single stick of RAM, so it will be a little bit for more builds. I'll be sure to put a new one out before I do though.
Tolipohs said:
New build. Sorry it took a while, I was having trouble getting it to build and I just ended up downloading the sources fresh. I'm going to be RMAing my motherboard after Christmas because it currently works with only a single stick of RAM, so it will be a little bit for more builds. I'll be sure to put a new one out before I do though.
Click to expand...
Click to collapse
Has anyone noticed that focus no longer works in any camera app with the update to 5.0.2? This seems to be present across all 5.0.2 ROM's.
goliath714 said:
Has anyone noticed that focus no longer works in any camera app with the update to 5.0.2? This seems to be present across all 5.0.2 ROM's.
Click to expand...
Click to collapse
I hadn't used the camera yet but checking now it does seem that way.
Tolipohs said:
I hadn't used the camera yet but checking now it does seem that way.
Click to expand...
Click to collapse
I've tried all the current ROM's, AICP, BlissPop, CM, SlimLP, and LiquidSmooth LP and this issue is present in all ROM's so I'm guessing it goes further than just the CM tree.
goliath714 said:
I've tried all the current ROM's, AICP, BlissPop, CM, SlimLP, and LiquidSmooth LP and this issue is present in all ROM's so I'm guessing it goes further than just the CM tree.
Click to expand...
Click to collapse
I think my notification tone is bugged too, is yours?
Tolipohs said:
I think my notification tone is bugged too, is yours?
Click to expand...
Click to collapse
Yes.
goliath714 said:
Yes.
Click to expand...
Click to collapse
Ok, thanks. I'll add these to the op.
Christmas present for you guys.
I'm curious if anyone is using this (or any) cm12 rom on an Activated htc evo 4g lte sprint phone. I ask because I have a couple of these phones that are not activated I give my kids to play with. My wife has this phone also and I'm thinning about installing this on her phone but wanted to know if I should expect any issues with data or GPS. We travel allot so a concern is the ability to quickly transition from 3g to 4g back to 3g. With a "stock based" rom it has no problem but I noticed with cm11 it had issues keeping data
Sent from my HTC One_M8 using Tapatalk 4
knightwolf123 said:
I'm curious if anyone is using this (or any) cm12 rom on an Activated htc evo 4g lte sprint phone. I ask because I have a couple of these phones that are not activated I give my kids to play with. My wife has this phone also and I'm thinning about installing this on her phone but wanted to know if I should expect any issues with data or GPS. We travel allot so a concern is the ability to quickly transition from 3g to 4g back to 3g. With a "stock based" rom it has no problem but I noticed with cm11 it had issues keeping data
Sent from my HTC One_M8 using Tapatalk 4
Click to expand...
Click to collapse
no data transition issues with lp roms. using it now.
Sent from my EVO using XDA Premium 4 mobile app
New build.
Tolipohs said:
New build.
Click to expand...
Click to collapse
You Sir are a CHAMP!
Do you know are the "post-22nd" bugs mentioned in the op still there? I know you're not doing dev on this yourself, just curious if anyone has noted upstream fixes and this thread is pretty quiet.
Wanting to take it for another spin but with small kids and holidays my camera is getting a workout. If not I'll fire it up here in a day or two, check for myself, and report back
Thanks a ton for keeping this going. I'm squeezing every last mile out of this phone as my family is between homes at the moment so I'm squirreling away every dollar I can.
dangle79 said:
You Sir are a CHAMP!
Do you know are the "post-22nd" bugs mentioned in the op still there? I know you're not doing dev on this yourself, just curious if anyone has noted upstream fixes and this thread is pretty quiet.
Wanting to take it for another spin but with small kids and holidays my camera is getting a workout. If not I'll fire it up here in a day or two, check for myself, and report back
Thanks a ton for keeping this going. I'm squeezing every last mile out of this phone as my family is between homes at the moment so I'm squirreling away every dollar I can.
Click to expand...
Click to collapse
Still doing it on my phone. I'll probably do a new build when I go to bed.
EDIT: Now I'm not an expert at this but this looks like it should fix it, so I guess in the morning I'll find out, I'll be sure to change the OP if it does.
Is there a site I can download a zip to test using TWRP? If so, where is it?
Thanks,
Harris
Google "mate 2 cm13 unofficial".
Enjoy it but at your own risk though.
Harris.S.Newman said:
Is there a site I can download a zip to test using TWRP? If so, where is it?
Thanks,
Harris
Click to expand...
Click to collapse
Camera is still not working. Everything else is solid. Work In Progress. Just so you know.
Just to document
MT2-User said:
Google "mate 2 cm13 unofficial".
Enjoy it but at your own risk though.
Click to expand...
Click to collapse
I found this:
https://www.androidfilehost.com/?w=files&flid=45485
which looks promising...haven't tried it yet.
Harris.S.Newman said:
I found this:
https://www.androidfilehost.com/?w=files&flid=45485
which looks promising...haven't tried it yet.
Click to expand...
Click to collapse
Make sure you have the right TWRP. The camera won't work. You may download GApps, which supports Android 6.01, before you decide to install CM13.
MAKE A NANDROID BACKUP BEFORE YOU DO CLEAN FLASH THE CM13.ZIP.
You may need backup your data with 3rd party app, e.g. Titanium Backup Pro, to be able to restore to CM13. TWRP may not work as you would expect.
Harris.S.Newman said:
I found this:
https://www.androidfilehost.com/?w=files&flid=45485
which looks promising...haven't tried it yet.
Click to expand...
Click to collapse
Camera is being worked on. No timeframe. Cm has much work to do still.
Marshmallow GAPPS
Here is a link to a set of Marshmallow GAPPS that should work with any MM Rom
http://download.dirtyunicorns.com/f.../BaNkS_Dynamic_GApps_6.x.x_12-22-15_23:20.zip
how do we fix the camera?
mobeel56 said:
how do we fix the camera?
Click to expand...
Click to collapse
It is a kernel issue. There is zip you can flash in twrp to get a semi working camera. Unstable but it does work. I will provide a link from my drive account.
---------- Post added at 06:11 PM ---------- Previous post was at 06:09 PM ----------
https://drive.google.com/file/d/0B97V_YadJs2bX051aThxYm81SkE/view?usp=docslist_api
Moody66 said:
It is a kernel issue. There is zip you can flash in twrp to get a semi working camera. Unstable but it does work. I will provide a link from my drive account.
---------- Post added at 06:11 PM ---------- Previous post was at 06:09 PM ----------
https://drive.google.com/file/d/0B97V_YadJs2bX051aThxYm81SkE/view?usp=docslist_api
Click to expand...
Click to collapse
Thanks! There is also an issue where the sound plays faster than the video. Is there a fix for that too?
mobeel56 said:
Thanks! There is also an issue where the sound plays faster than the video. Is there a fix for that too?
Click to expand...
Click to collapse
I don't recall anyone reporting that issue. There are numerous versions of cm13 out there. By more than one dev. My experience was better with some of the earlier builds. Feel free to state what app you are using for video and such as it will help. Development has someone slowed because CM may be close to a release themselves. Noone really knows at this point. Some recent changes in CM have caused me to stop trying. Probably another reason the rest have slowed. Feel free to try the camera fix and report back. Again its buggy but does work.
Moody66 said:
I don't recall anyone reporting that issue. There are numerous versions of cm13 out there. By more than one dev. My experience was better with some of the earlier builds. Feel free to state what app you are using for video and such as it will help. Development has someone slowed because CM may be close to a release themselves. Noone really knows at this point. Some recent changes in CM have caused me to stop trying. Probably another reason the rest have slowed. Feel free to try the camera fix and report back. Again its buggy but does work.
Click to expand...
Click to collapse
I just flashed the CM 13 Dec. 25 by SHM. The camera app i flashed works well. i took like 10 photos and the all saved. I think i will uninstall the camera app the came with the rom. The video issue normally happens with facebook videos, youtube videos, instagram videos and snapchat videos but it seems to be working now. The snapchat camera does work but it takes about 45 seconds for it to come up after switching between front and rear camera and freezes often. With the instagram camera, it worked the first time i opened the app but wont work after. After about 5 minutes of messing with everything, Every app including the one i flashed says that they cannot connect to the camera and that i should restart the device. hope this helps
---------- Post added at 12:32 AM ---------- Previous post was at 12:29 AM ----------
^ i wote that while i was messing with the phone, thats why stuff changed lol
mobeel56 said:
I just flashed the CM 13 Dec. 25 by SHM. The camera app i flashed works well. i took like 10 photos and the all saved. I think i will uninstall the camera app the came with the rom. The video issue normally happens with facebook videos, youtube videos, instagram videos and snapchat videos but it seems to be working now. The snapchat camera does work but it takes about 45 seconds for it to come up after switching between front and rear camera and freezes often. With the instagram camera, it worked the first time i opened the app but wont work after. After about 5 minutes of messing with everything, Every app including the one i flashed says that they cannot connect to the camera and that i should restart the device. hope this helps
---------- Post added at 12:32 AM ---------- Previous post was at 12:29 AM ----------
^ i wote that while i was messing with the phone, thats why stuff changed lol
Click to expand...
Click to collapse
Yep. Reboot solves it until it hangs again. It has been tested for a month or so now. Some had better results than others. The camera it flashes works decently. Its just a temp fix into kernel is patched.
Which dev do you think has the best build? and which build is it?
For those wondering about using large SD Cards with MM, if the Mate will read and write to it, it should work fine. I am using this card http://www.amazon.com/SanDisk-Ultra-200GB-Micro-SDSDQUAN-200G-G4A/dp/B00V62XBQQ and it seems to be working just fine so far. Just got it and moved my stuff over to it today. Its a 200GB card but when formatted by the phone it shows as 183GB which is more than enough for me. I got it when they were running a special on them for $80. Right now they have gone up some as of 12/29 at 11:06 pm the card is selling for $109 with free shipping. For those that want to transfer a lot of music and videos to your phone this might be the card for you.
mobeel56 said:
Which dev do you think has the best build? and which build is it?
Click to expand...
Click to collapse
There are only two developers that I Have found that are make MM ROMS for the Mate two and if you search for them on AFH you can find them. They are Dargu and SHM. I use the builds that Dargu makes because they seem to be updated more Regularly, but you might like the builds made by SHM. I would suggest trying each one and seeing which one you like best and sticking with it or just flash whichever one is the newest at the time. Its basically a personal choice that each person has to make.
robertbarber said:
There are only two developers that I Have found that are make MM ROMS for the Mate two and if you search for them on AFH you can find them. They are Dargu and SHM. I use the builds that Dargu makes because they seem to be updated more Regularly, but you might like the builds made by SHM. I would suggest trying each one and seeing which one you like best and sticking with it or just flash whichever one is the newest at the time. Its basically a personal choice that each person has to make.
Click to expand...
Click to collapse
Ohhh okay. i get you. Just one last thing. I see in another thread that you modding the kernel to extend battery life. Is there a zip that i can flash to get this? like the modded rom or something?
Any new Supersu zips for this ?
beastonprowl said:
Any new Supersu zips for this ?
Click to expand...
Click to collapse
Best to stick with root built into the ROM for now.
THANKS!
Sure appreciate the work on a MM rom. 10 years ago, I would have been right in the thick of it, flashing every
new one that came along, but, anymore these things are "just a phone" for me. I've been lucky with mine.
4.3 was stable, 5.1 is stable. The only issue I've had, is that on reboot, the launcher (nova) won't stick, but,
I don't turn it off or reboot but once in a blue moon.
I doubt if we'll see an official MM for the Mate2, but if a really stable one comes along, who knows, I might
give it a try. The camera MUST work for me, since I use it pretty much daily (work images for engineers).