Wish i posted the thread in the right place.
I have gt-i9300 and want to root it.
Here are some questions=
Q1. In which process of flashing i am modifying my bootloader? (while flashing cwm, kernal etc..)
Q2. When i flash stock ROM through Odin, do i restore the kernal, recovery and the flash counter?
Q.3 Is flashing a ROM after root is a risky thing?
Q.4 Can I flash a rom directly after rooting and flashing CWM? (without changing kernal?)
Q5. What is kernal compatibility? like some kernals are JB only. And does every ROM contains it's own kernal?
Q6. Is there a way to root and get cwm without getting the stupid yellow triangle?
:angel:
start by reading rootSU's guide - http://forum.xda-developers.com/showthread.php?t=2362743
root
eatsleep said:
Wish i posted the thread in the right place.
I have gt-i9300 and want to root it.
Here are some questions=
Q1. In which process of flashing i am modifying my bootloader? (while flashing cwm, kernal etc..)
Q2. When i flash stock ROM through Odin, do i restore the kernal, recovery and the flash counter?
Q.3 Is flashing a ROM after root is a risky thing?
Q.4 Can I flash a rom directly after rooting and flashing CWM? (without changing kernal?)
Q5. What is kernal compatibility? like some kernals are JB only. And does every ROM contains it's own kernal?
Q6. Is there a way to root and get cwm without getting the stupid yellow triangle?
:angel:
Click to expand...
Click to collapse
hallo im also new to rooting but flashed cm10.1 yesterday with root and can share what i did.
i also got i9300 nordic version of the s3. and downloaded some files
odin 3.07
cfroot 3.64
cm10.1
gapps from 03-2013
i resettet my phone and enabled USB debugging and put the phone in download mode and startet up odin and made sure its connected and loaded cfroot.tar and flashed and the phone rebootet itself and installed the ness. apps for rooting. then i bootet up in recovery manager and went to install from sdcard and installed cm10.1 and then gapps and then did factory reset and dalvik wipe and rebootet and it bootet up CM10.1 and deleted /0 folder on the phone which was empty folder from previous touchwiz samsung rom
and yes there are risks but i did this 2 times. tw to cm10 and then back again but everything went problem free. so the risk ppl are talking about is mostly likely cuz some broke and if u mess up it breaks. so it can happen.
q1; when u flash cfroot the bootloader changed and it changes counter from 0 to 1.
q2: when u flash stock back with odin it flashes rom and bootloader/recovery but counter is the same but can be fixed easily. ( did it myself between my 2 flashes so when i flashed back to CM10 it still was on 1
q3: i think its everything thats risky. dont think root and rom flashing are more risky than others
q4: dont know what u mean exactly. i didnt mess with kernals. CM10.1 has a good one i think.
q5: dont either
q6: i dont have any yelly triagle on my cfroot+cm10.1. theres a lille read thing in the left corner like 2mm long that shows u got flashed.
hope it helps.
q6 = Triangle Away https://play.google.com/store/apps/details?id=eu.chainfire.triangleaway
TimGrundy2012 said:
q6 = Triangle Away https://play.google.com/store/apps/details?id=eu.chainfire.triangleaway
Click to expand...
Click to collapse
Unless you have 4.1.1 + bootloader.
mikep99 said:
start by reading rootSU's guide - http://forum.xda-developers.com/showthread.php?t=2362743
Click to expand...
Click to collapse
Useful info, read it all but still answers are not obtained
and also i need a kernal for both AOSP and Samsung roms which i can't find
eatsleep said:
Useful info, read it all but still answers are not obtained
and also i need a kernal for both AOSP and Samsung roms which i can't find
Click to expand...
Click to collapse
For kernels that support both go here or here. At the moment Siyah or Goggy Max are the people's choices I assume.
Q.3 Is flashing a ROM after root is a risky thing?
Any flashing involves risk from almost no risk to a much bigger risk for those that dont read the basics and follow instructions .
Root voids warranty .
Q5. What is kernal compatibility? like some kernals are JB only. And does every ROM contains it's own kernal?
yes and yes .
Q2. When i flash stock ROM through Odin, do i restore the kernal, recovery and the flash counter?
NO read the basic faqs and guides all stickied .
Q.4 Can I flash a rom directly after rooting and flashing CWM? (without changing kernal?)
YES
and also i need a kernal for both AOSP and Samsung roms which i can't find
IT is inside the rom .
I suggest you bother to read the faqs and guides or join the help i bricked my phone club .
jje
eatsleep said:
Wish i posted the thread in the right place.
I have gt-i9300 and want to root it.
Here are some questions=
Q1. In which process of flashing i am modifying my bootloader? (while flashing cwm, kernal etc..)
Q2. When i flash stock ROM through Odin, do i restore the kernal, recovery and the flash counter?
Q.3 Is flashing a ROM after root is a risky thing?
Q.4 Can I flash a rom directly after rooting and flashing CWM? (without changing kernal?)
Q5. What is kernal compatibility? like some kernals are JB only. And does every ROM contains it's own kernal?
Q6. Is there a way to root and get cwm without getting the stupid yellow triangle?
:angel:
Click to expand...
Click to collapse
1. You can flash boooader separately or when you flash stock roms. (I can be wrong but this is what I know)
2. I never done that but yes for first two, not sure about flash counter, you may still have to clear them with TA first.
3. As above answer, it's always risky to do stuff without proper knowledge and no guarantees even after proper knowledge but mostly no.
4. Yes.
5. Kernels are essential part of your phone and they are compatible with your os version only and also ur phone model. So if a kernel is for s3 4.2.2, you can't flash it over to amy other model or os version. Yes for second part.
6. No. Triangle away may remove your flashing counter but as long as you have custom anything and your rom status is modified that triangle will be there.
Sent from my GT-I9300 using Tapatalk 2
chrismast said:
For kernels that support both go here or here. At the moment Siyah or Goggy Max are the people's choices I assume.
Click to expand...
Click to collapse
look, the question i am trying to ask is that can i flash aokp Rom over Siyah's kernal ( siyah's kernal is samsung kernal) what will happen?
Will i Brick my phone?
And if every ROM has it's own kernal so every new rom will replace my old kernal??
How to keep my prev kernal?
Thanks in advance :highfive:
eatsleep said:
look, the question i am trying to ask is that can i flash aokp Rom over Siyah's kernal ( siyah's kernal is samsung kernal) what will happen?
Will i Brick my phone?
And if every ROM has it's own kernal so every new rom will replace my old kernal??
How to keep my prev kernal?
Thanks in advance :highfive:
Click to expand...
Click to collapse
Siyah supports both cm and stock. Yes, you cam flash cm over stock or siyah kernel.
You have to flash your kernel again after every rom flash.
Sent from my GT-I9300 using Tapatalk 2
eatsleep said:
look, the question i am trying to ask is that can i flash aokp Rom over Siyah's kernal ( siyah's kernal is samsung kernal) what will happen?
Will i Brick my phone?
And if every ROM has it's own kernal so every new rom will replace my old kernal??
How to keep my prev kernal?
Thanks in advance :highfive:
Click to expand...
Click to collapse
As long as the rom comes with a kernel, which is the normal base, you have to flash the kernel again. Usually you can do this direct from recovery before the full reboot.
As long as the kernel supports your rom type (see each kernel's thread for it), you should be fine as long as you follow the instructions.
chrismast said:
As long as the rom comes with a kernel, which is the normal base, you have to flash the kernel again. Usually you can do this direct from recovery before the full reboot.
As long as the kernel supports your rom type (see each kernel's thread for it), you should be fine as long as you follow the instructions.
Click to expand...
Click to collapse
Okay, probably the last post.
How to flash googy max kernal on galaxy s3 i9300?
Can i flash any 4.1.2 rom (aosp like miui or aokp etc) on googy max,
and in which process is the bootloader modified?
eatsleep said:
Okay, probably the last post.
How to flash googy max kernal on galaxy s3 i9300?
Can i flash any 4.1.2 rom (aosp like miui or aokp etc) on googy max,
Click to expand...
Click to collapse
bootloader no clue, I never touched it, too dangerous to mess up stuff.
for flashing googy, usually you do it in CWM or via Odin. Check out the thread and read the instructions. Syiah's thread also got a huge amount of guides in the first couple of posts and they should be valid somehow for Googy as well as it is based on Siyah.
eatsleep said:
Okay, probably the last post.
How to flash googy max kernal on galaxy s3 i9300?
Can i flash any 4.1.2 rom (aosp like miui or aokp etc) on googy max,
and in which process is the bootloader modified?
Click to expand...
Click to collapse
Please do not start messing with bootloaders .
Logic says read the instructions for the kernel you want to flash .
Its a CWM file and flashed via recovery .
You really should bother yourself to read the basic faqs and guide .
jje
eatsleep said:
Okay, probably the last post.
How to flash googy max kernal on galaxy s3 i9300?
Can i flash any 4.1.2 rom (aosp like miui or aokp etc) on googy max,
and in which process is the bootloader modified?
Click to expand...
Click to collapse
The bootloader isn't modified. The bootloader *shows* modified by reading other data.
Sent from my GT-I9300 using Tapatalk 4 Beta
Related
Is it ok to flash a custom kernel on top of another custom kernel?
Sent from my GT-I9100 using xda premium
You dont need to revert on the original one before flash another custom. But you need to format dalvik cache and cache in recovery before flashing or you probably have a bootloop.
I suggest to make a backup of the rom in recovery, so If something goes wrong you can enter recovery and have the latest known working rom back in 2 minutes.
Please note flashing kernels always have a very small chance to corrupt your efs partition, its suggested to backup your efs folder before start play with roms and kernels. How to backup the efs, use the search tool of the forum
Sent from my GT-I9100 using Tapatalk
rembrandtlnx said:
You dont need to revert on the original one before flash another custom. But you need to format dalvik cache and cache in recovery before flashing or you probably have a bootloop.
I suggest to make a backup of the rom in recovery, so If something goes wrong you can enter recovery and have the latest known working rom back in 2 minutes.
Please note flashing kernels always have a very small chance to corrupt your efs partition, its suggested to backup your efs folder before start play with roms and kernels. How to backup the efs, use the search tool of the forum
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Thanks for that. I know how to backup efs. Can i just use nitrality instead of ADB? To flash ROMs does it need to be in a specific firmware like sgsl or is it ok to have different firmware from the base of a custom rom?
Sent from my GT-I9100 using xda premium
I know my english sux sry:
Depends on the kernel but usually it is listed in the kernel thread the how to (odin or clockworkmod), clockworkmode is already on your phone if you rooted it with cf-root.
Now, to enter clockworkmod recovery, just push volume up + home + power button until the S2 bootlogo appears, then wait few seconds.
About the kernel type, i always flashed any kernel despite of my baseband, the difference is not so big.
if something is not working, you can always youse the nandroid backup (the backup done with the recovery cwm (up+home+power) and get back to the previous rom with previous kernel.
Im not really in the kernel "how to" someone else can prolly give you more detailed info, but as for me, i flashed ninphetamine 2.05 and 2.1.3 in cwm and it worked.
But.. as always, the kernel developers got a how to install in their kernel thread, so just read those and be sure about if you need odin or clockworkmod, if you are not sure, DONT flash anything until you are sure on how to proceed or wich system to use for flashing, better keep an old kernel with a working phone than have a brick to hold the papers
PS: also almost all the roms on the S2 forum are flashable with the clockworkmod, only few (like the lite'ning) are flashable with odin.
Again, i know im boring, dont proceed if you are not sure, better ask 10 times instead brick your phone
ephraim033 said:
Is it ok to flash a custom kernel on top of another custom kernel?
Yes not a problem flash as per the custom kernel instructions .
Kernel can be changed within an individual firmware or custom rom .
jje
Click to expand...
Click to collapse
Thanks for the reply guys. Coming back to my second question. What if i have KF1 and the rom i want to flash has a base of KI3, should i flash to stock KI3 first before flashing the custom rom or is it ok to flash a KI3 custom rom without flashing first to stock KI3?
Sent from my GT-I9100 using xda premium
The custom rom first, the kernel after.
I got the habbit to boot succesfully at least once the custom rom. If everything is ok i then flash the kernel. Better do 1 task at time.
You can decide to try the rom without change the kernel..and try a different one if you experience battery drain or other problems.
Sent from my GT-I9100 using Tapatalk
If i am on KH3 and want to flash a custom rom based on KI4 then i would flash stock KI4 and KI4 root first .
Custom rom flashed i will often try a different kernel later .
jje
from my experience
I have found that when i upgraded rom from gingerbread to ics that most custom kernals work with these roms ie now running with xxlpw ics (from gingerbread) with xwlp7 kernal. from what i have read on other posts and threads i could swap kernal to siya or any other as the mega good developers have made them (hotswappable) interchangeable as previous reply said swapping kernal might give you better battery or solve overheat probs.
Eg iwas running darkys rom with siya kernal v?something my phone rocketed temp in short time so i swapped kernal for an up to date one (could have used older one) it solved problem.
Anyone feel free to correct explination im still learning too lol
linuxnubee said:
I have found that when i upgraded rom from gingerbread to ics that most custom kernals work with these roms ie now running with xxlpw ics (from gingerbread) with xwlp7 kernal. from what i have read on other posts and threads i could swap kernal to siya or any other as the mega good developers have made them (hotswappable) interchangeable as previous reply said swapping kernal might give you better battery or solve overheat probs.
Eg iwas running darkys rom with siya kernal v?something my phone rocketed temp in short time so i swapped kernal for an up to date one (could have used older one) it solved problem.
Anyone feel free to correct explination im still learning too lol
Click to expand...
Click to collapse
I'll just point out this thread was dead since Sept 30 before you posted...
Hi S2 user, :angel:
I will buy a new S2 phone soon. I need a little help from you guys. I need to know something about S2 :laugh:
My old phone is Xperia Arc S. This phone need following step to flash kernel and rom.
Kernel:
For flash a new kernel, I need to unlocked the bootloader first. Then this phone can flash any kernel anytime. But unlocking the bootloader will void the warranty.
Rom:
For flash a new rom, as long as the rom does not need to have specific kernel, in other word, stock based rom, no unlocked bootloader required. Just install the CWM and flash the rom.
How about S2 guys? Do I need to unlock something before flash kernel and rom? Can someone explain clearly or likes how I explain my old phone.
p/s- i read in some thread, doing a factory reset in cwm will make S2 brick? hard brick? can't even power on the phone. OMG is it true?
its very scary because in Xperia Arc S, i always flash a new rom. flasholic
I don't want my new S2 brick
I hope you guys can help me. Thanks
faiz5200 said:
Hi S2 user, :angel:
I will buy a new S2 phone soon. I need a little help from you guys. I need to know something about S2 :laugh:
My old phone is Xperia Arc S. This phone need following step to flash kernel and rom.
Kernel:
For flash a new kernel, I need to unlocked the bootloader first. Then this phone can flash any kernel anytime. But unlocking the bootloader will void the warranty.
Rom:
For flash a new rom, as long as the rom does not need to have specific kernel, in other word, stock based rom, no unlocked bootloader required. Just install the CWM and flash the rom.
How about S2 guys? Do I need to unlock something before flash kernel and rom? Can someone explain clearly or likes how I explain my old phone.
p/s- i read in some thread, doing a factory reset in cwm will make S2 brick? hard brick? can't even power on the phone. OMG is it true?
its very scary because in Xperia Arc S, i always flash a new rom. flasholic
I don't want my new S2 brick
I hope you guys can help me. Thanks
Click to expand...
Click to collapse
You don't have to unlock. Just download Odin and flash all the ROMs/kernels you want. As for the cwm brick bug, your phone will only brick if you factory reset through CWM in 4.0.4. In other versions you should be fine.
Sent from my GT-I9100 using xda app-developers app
S2 is the best phone to flash No problem with bootloader lock, you download Odin und happy flashing
Gesendet von meinem GT-I9100 mit Tapatalk 2
preseodymium said:
You don't have to unlock. Just download Odin and flash all the ROMs/kernels you want. As for the cwm brick bug, your phone will only brick if you factory reset through CWM in 4.0.4. In other versions you should be fine.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply. For the brick bug, how come I want to factory reset when flashing new rom? And I think latest firmware for S2 is 4.0.4. Correct me if im wrong.
faiz5200 said:
Thanks for your reply. For the brick bug, how come I want to factory reset when flashing new rom? And I think latest firmware for S2 is 4.0.4. Correct me if im wrong.
Click to expand...
Click to collapse
I am currently installing 4.1.2, unofficial of course
The brick Bug problem by 4.0.4 only with Stock Kernel ! when you have 4.0.4 on your phone you flash a save Kernel (Siyah, Dorimanax .....) with Odin (only Odin not Cwm )
and it was save .After you can flash wath you want
smooth 123 said:
The brick Bug problem by 4.0.4 only with Stock Kernel ! when you have 4.0.4 on your phone you flash a save Kernel (Siyah, Dorimanax .....) with Odin (only Odin not Cwm )
and it was save .After you can flash wath you want
Click to expand...
Click to collapse
I see. So the brick bug actually come from the kernel inside firmware 4.0.4. Not the entire 4.0.4 firmware. Is other custom kernel likes you mention (Siyah, ..) is 100% safe?
faiz5200 said:
I see. So the brick bug actually come from the kernel inside firmware 4.0.4. Not the entire 4.0.4 firmware. Is other custom kernel likes you mention (Siyah, ..) is 100% safe?
Click to expand...
Click to collapse
enjoy ur s2, i just got the s2 and flash over 20 roms like crazy!! jajaja is very good phone
faiz5200 said:
I see. So the brick bug actually come from the kernel inside firmware 4.0.4. Not the entire 4.0.4 firmware. Is other custom kernel likes you mention (Siyah, ..) is 100% safe?
Click to expand...
Click to collapse
100% safe! Her is ohter 100% safe Kernel http://forum.xda-developers.com/showthread.php?t=1877270
for 4.0.4 Stock In this thread you found more to the theme brick bug.
I flash my S2 i don t know:victory: 100× no Problem S2 likes flashing
faiz5200 said:
Thanks for your reply. For the brick bug, how come I want to factory reset when flashing new rom? And I think latest firmware for S2 is 4.0.4. Correct me if im wrong.
Click to expand...
Click to collapse
You factory reset when installing ROMs to make sure there are no errors. Plus with siyah kernels, you can't be 100% sure your phone won't brick when factory reset in CWM. Best is to flash 4.0.3 before doing anything else.
Sent from my GT-I9100 using xda app-developers app
Rooting
Guys.. 1 more question.
When I get my S2, I plan to flash custom rom like aosp or aokp but not stock rom.
Do I need to root my S2 first before flash any rom? Because my Xperia Arc S, I do not need to root because root come inside with the custom rom zip. So when I flash a new rom, my Xperia automatically root. No need to do other step.
I'm curious about this because I see in some thread, talking about cf root or something like that. The thread is very updated. Looks like it very necessary to do it at least once to have root before flash any custom rom.
Please explain for me about this root. Thanks guys.
faiz5200 said:
Guys.. 1 more question.
When I get my S2, I plan to flash custom rom like aosp or aokp but not stock rom.
Do I need to root my S2 first before flash any rom? Because my Xperia Arc S, I do not need to root because root come inside with the custom rom zip. So when I flash a new rom, my Xperia automatically root. No need to do other step.
I'm curious about this because I see in some thread, talking about cf root or something like that. The thread is very updated. Looks like it very necessary to do it at least once to have root before flash any custom rom.
Please explain for me about this root. Thanks guys.
Click to expand...
Click to collapse
I'm not sure about CF root though. Although the ROM I am in now has built in kernels, I still think its best to root first as some ROMs may not have the built in kernel (never searched other ROMs not entirely sure). I might recomment siyah kernel though
Sent from my GT-I9100 using xda app-developers app
preseodymium said:
I'm not sure about CF root though. Although the ROM I am in now has built in kernels, I still think its best to root first as some ROMs may not have the built in kernel (never searched other ROMs not entirely sure). I might recomment siyah kernel though
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
uhh.. So root is come from kernel? Ermm.. so it different than xperia. So if I flash siyah kernel, I do not need to root?
faiz5200 said:
Guys.. 1 more question.
When I get my S2, I plan to flash custom rom like aosp or aokp but not stock rom.
Do I need to root my S2 first before flash any rom? Because my Xperia Arc S, I do not need to root because root come inside with the custom rom zip. So when I flash a new rom, my Xperia automatically root. No need to do other step.
I'm curious about this because I see in some thread, talking about cf root or something like that. The thread is very updated. Looks like it very necessary to do it at least once to have root before flash any custom rom.
Please explain for me about this root. Thanks guys.
Click to expand...
Click to collapse
Some people want to simple root their phone and don't care too much for custom roms and stuff. So for such people, they can simply root their phone using one of the many rooting methods mentioned.
However, if your primary aim is to install a custom rom/ kernel, you can use Odin to flash a custom kernel on your phone. (like siyah, dorimanx, Philz, the list goes on..) and you'll have root. Thereafter you can install a custom rom compatible with the kernel. Earlier on it was simple. Flash siyah or dorimanx and any custom rom will work on it. Kinda like a 'one size fits all' deal. However, right now with new mali drivers etc, some versions of a kernel are reqd based on which rom you plan to install. (JB with new mali drivers or JB without those new mali drivers/ICS)
CF-Root is the method I'd used..but right now it's not recommended, since if you're on certain 4.0.4 firmware, that is susceptible to the emmc brickbug I'm sure you've read about. Siyah, dori, etc kernels are safe.
HAXTREME said:
Some people want to simple root their phone and don't care too much for custom roms and stuff. So for such people, they can simply root their phone using one of the many rooting methods mentioned.
However, if your primary aim is to install a custom rom/ kernel, you can use Odin to flash a custom kernel on your phone. (like siyah, dorimanx, Philz, the list goes on..) and you'll have root. Thereafter you can install a custom rom compatible with the kernel. Earlier on it was simple. Flash siyah or dorimanx and any custom rom will work on it. Kinda like a 'one size fits all' deal. However, right now with new mali drivers etc, some versions of a kernel are reqd based on which rom you plan to install. (JB with new mali drivers or JB without those new mali drivers/ICS)
CF-Root is the method I'd used..but right now it's not recommended, since if you're on certain 4.0.4 firmware, that is susceptible to the emmc brickbug I'm sure you've read about. Siyah, dori, etc kernels are safe.
Click to expand...
Click to collapse
I see. Thanks. Flash kernel using odin. I see in this thread http://forum.xda-developers.com/showthread.php?t=1125282 , he said flashing a kernel is same like flashing a custom rom which is in CWM. Flash kernel in CWM? I thought the only way is using odin.
faiz5200 said:
I see. Thanks. Flash kernel using odin. I see in this thread http://forum.xda-developers.com/showthread.php?t=1125282 , he said flashing a kernel is same like flashing a custom rom which is in CWM. Flash kernel in CWM? I thought the only way is using odin.
Click to expand...
Click to collapse
For S2 we can. Because it won't increase your flash counter. But I never tried flashing through CWM.
Sent from my GT-I9100 using xda app-developers app
faiz5200 said:
I see. Thanks. Flash kernel using odin. I see in this thread http://forum.xda-developers.com/showthread.php?t=1125282 , he said flashing a kernel is same like flashing a custom rom which is in CWM. Flash kernel in CWM? I thought the only way is using odin.
Click to expand...
Click to collapse
There are two ways of flashing a kernel.
1. Use the .tar version of the kernel and flash via Odin
(the same way you'd flash the cf-root kernel you'd mentioned in a post above. I'll assume you know the steps as they're mentioned in chainfire's post. Or there are many posts on that topic)
Advantages: tried and tested route, simple one step method. You're rooted and have a custom kernel in about 30 secs.
Disadvantage: You rely on Odin and the connection to your computer which some don't trust. Increases flash counter.
2. Use the .zip version of the kernel and flash via CWM.
Since in this case you need CWM to start off with, you can use Rachmat3's method described HERE to get temporary CWM first.
Advantages: No computer needed. Everything happens through your phone. Flash counter isnt increased.
Disadvantages: Can be a little finicky at times..but you'll get there eventually. Involves 2 steps. First get temporary CWM, then install custom kernel via cwm.
You can start off with a very popular kernel. Gokhanmoral's siyah kernel.Both the zip and tar versions are available downloadable from HERE
HAXTREME said:
There are two ways of flashing a kernel.
1. Use the .tar version of the kernel and flash via Odin
(the same way you'd flash the cf-root kernel you'd mentioned in a post above. I'll assume you know the steps as they're mentioned in chainfire's post. Or there are many posts on that topic)
Advantages: tried and tested route, simple one step method. You're rooted and have a custom kernel in about 30 secs.
Disadvantage: You rely on Odin and the connection to your computer which some don't trust. Increases flash counter.
2. Use the .zip version of the kernel and flash via CWM.
Since in this case you need CWM to start off with, you can use Rachmat3's method described HERE to get temporary CWM first.
Advantages: No computer needed. Everything happens through your phone. Flash counter isnt increased.
Disadvantages: Can be a little finicky at times..but you'll get there eventually. Involves 2 steps. First get temporary CWM, then install custom kernel via cwm.
You can start off with a very popular kernel. Gokhanmoral's siyah kernel.Both the zip and tar versions are available downloadable from HERE
Click to expand...
Click to collapse
Another disadvantage of "not using" odin is when you cant enter cwm.
I use cwm and mobile odin.I flashed a kernel and couldnt access cwm nor phone would boot.
So I had to fix it using my pc via odin.
Can I change my kernel while using the stock rom, or i need first to use custom rom?
I want to use this kernel - http://forum.xda-developers.com/showthread.php?t=1709686
But i cant find instructions on how to install this to my device...
And most important question - if i want to restore to stock kernel how do I do it?
ohad156 said:
Can I change my kernel while using the stock rom, or i need first to use custom rom?
I want to use this kernel - http://forum.xda-developers.com/showthread.php?t=1709686
But i cant find instructions on how to install this to my device...
And most important question - if i want to restore to stock kernel how do I do it?
Click to expand...
Click to collapse
Yes you can and you simply flash via Odin restore is by flashing a stock rom via Odin .
But as you fail to see the instructions in the kernel post you linked read the thread before breaking your phone .
jje
JJEgan said:
Yes you can and you simply flash via Odin restore is by flashing a stock rom via Odin .
But as you fail to see the instructions in the kernel post you linked read the thread before breaking your phone .
jje
Click to expand...
Click to collapse
Lets say i flash siyah kernel now... and tomorrow i want to flash Omega rom - i will lose the siyah kernel to the stock kernel?
You get whatever kernel is in the rom you flash .
Repeat i don't advise flashing for those that fail to understand the very basics and have not even bothered to read the guides and FAQS stickied .
#Its a very very expensive brick you may end up with #
jje
ok i got another question...
lets say i rooted the device then installed a few mods on my stock rom
then if i install a custom rom will all the mods be removed?
ohad156 said:
ok i got another question...
lets say i rooted the device then installed a few mods on my stock rom
then if i install a custom rom will all the mods be removed?
Click to expand...
Click to collapse
Obviously..whatever mods you have installed will be overwritten by the files you will flash...
Let us say for example..you are a dude wearing very colorful clothes and are sitting on a chair..now your elder brother comes in the room and wants to have the chair..so he kicks your a** and sits on the chair...see...now replace the chair with the Phone...yourself with the MOD and your elder brother with the new ROM....
Wasn't this easy!!!!
that means when i flash stock rom to my device i will also remove all mods, set the original kernel and original rom?
ohad156 said:
that means when i flash stock rom to my device i will also remove all mods, set the original kernel and original rom?
Click to expand...
Click to collapse
Yes
installing this kernel on stock rom should improve battery life?
ohad156 said:
installing this kernel on stock rom should improve battery life?
Click to expand...
Click to collapse
Now that is a question I can't answer..so try it out yourselves and enjoy if it help otherwise revert back using nandroid..
usually people who install this kernel enjoy better battery life?
Evening everyone
I was reading about how to flash CWM with CF-root but found a lot of issues regarding stock ICS LPM Kernel, it may lead to a hard brick
My question is, how can I flash CWM with this kernel, LPM Stock 4.0.3?
anticipated thanks
Did you take a look here? http://forum.xda-developers.com/showthread.php?t=1877270
Btw, rooting/customizing/flashing etc. may always lead to a hard brick.
Yes I'm reading there, but my question is if flashing PhilZ-cwm6 is safe
and, if after that, Can I flash another ROM, like Omega_ICS_v15.1_Black_Blue_XWLPG
Thankyou for your answer
MuayThaiFighter8 said:
Did you take a look here? http://forum.xda-developers.com/showthread.php?t=1877270
Btw, rooting/customizing/flashing etc. may always lead to a hard brick.
Click to expand...
Click to collapse
Raugote said:
Yes I'm reading there, but my question is if flashing PhilZ-cwm6 is safe
and, if after that, Can I flash another ROM, like Omega_ICS_v15.1_Black_Blue_XWLPG
Thankyou for your answer
Click to expand...
Click to collapse
Yep, you can flash Omega (or a custom kernel) afterwards because PhilZ's method will install ClockworkMod recovery on your S2.
Just make to sure to read every installation step. LPM is on the list.
MuayThaiFighter8 said:
Yep, you can flash Omega (or a custom kernel) afterwards because PhilZ's method will install ClockworkMod recovery on your S2.
Just make to sure to read every installation step. LPM is on the list.
Click to expand...
Click to collapse
Thanks a lot, I'm going to try that
very helpful
Philz CWM worked like a charm, now to make backup and Install ROM
guys im new here on galaxy s2 thread so kindly do not judge me if i ask noob things
i want to flash AOKP for galaxy s2 and i found 2 of them Revolt and thunder roms
download both + dorimanx kernel placed on SD going into CWM trying to flash kernel and rom but im getting this message :
E:signature verification failed !!
Like just about everything else on here, 'E:signature verification failed !!' has been covered many many times on here (Including a couple of times over the past few weeks). Search for those threads, your answer will be in one of them.
i think i have the stock recovery !!
flashing this Cf-root throw odin will give me the CWM ??
Having stock recovery would explain your problem. If you flash the correct CFRoot kernel via Odin, yes, you will have a rooted phone + CWM. However, many people prefer to simply flash the Odin version of a custom kernel (like Siyah) to achieve this aim these days (Given the issues with 4.0.4 stock kernels, which CFRoot is, and the brickbug). Find the relevant Odin flashable version of Siyah for the Android version you're running; check the Siyah threads for which build is compatible with which version of Android (should be on the first page).
all the Cf-root is ICS and im running JB what i can do in that case ??
all i want to access cwm to flash rom and kernel
This recovery I have
Sent from my LT26i using Tapatalk 2
Which as you said is stock recovery. You can flash temporary versions of CWM from stock recovery, but these only persists until the next reboot/aren't permanent. Make life easy for yourself & flash the Odin version of a rooted kernel as advised in my PP (Use CFRoot if you really want to, just don't do a wipe from CWM while you're running it, wait till you're running a custom kernel before doing any wipes).
Edit - You're welcome, BTW.
MistahBungle said:
Which as you said is stock recovery. You can flash temporary versions of CWM from stock recovery, but these only persists until the next reboot/aren't permanent. Make life easy for yourself & flash the Odin version of a rooted kernel as advised in my PP (Use CFRoot if you really want to, just don't do a wipe from CWM while you're running it, wait till you're running a custom kernel before doing any wipes).
Edit - You're welcome, BTW.
Click to expand...
Click to collapse
ye but the problem cf-root only for ICS and im on JB so if i flash it and then flash JB kernel will do the job or i will stuck !?
sorry if i sound noob but frist time im dealing with Samsung its completly diffrent from Sony
thanks for your help
OK. This is my final post to this thread. I tire very quickly of having to repeat myself.
For the last time...Go to the Siyah threads. Work out which Siyah build you need for the Android version you're running. Get the Odin flashable version of that kernel. Reboot into download mode & flash it with Odin.
Done.
Rooted phone + CWM.
dude sorry but i'v found this
flashing this Siyah-s2-v6.0b4
and now i have cwm and flashed thunder rom
thanks for help and sorry for beeing noob here
Make a nand and efs backup now for future reference.
theunderling said:
Make a nand and efs backup now for future reference.
Click to expand...
Click to collapse
yep this part i know from my Xperia S