So... I was kind of an idiot, and I flashed my Internal SD. Now I can't flash BeanStalk onto my phone, it says "Error opening ZIP"
What do I do? I'm screwed right now because my phone has no OS D:
Do you mean that you Wiped your internal SD?
It sounds like you got a bad download for the Beanstalk zip. Just re-download it on your computer and put it on the SD card, then put that back in your phone and reboot recovery.
OMGMatrix said:
Do you mean that you Wiped your internal SD?
It sounds like you got a bad download for the Beanstalk zip. Just re-download it on your computer and put it on the SD card, then put that back in your phone and reboot recovery.
Click to expand...
Click to collapse
Yes
I redownloaded the Beanstalk ZIP and got a 201.9MB file (I'm in Linux, if that makes a difference.) I am willing to try another ROM (actually, I will just to get a working phone), but how do I connect to TWRP to put a zip on there? I'm not sure where my MicroSD adapter is, I just moved... My fiancee a feature phone that I used to put the original zip on there, but I don't have her phone handy right now...
Even Rootbox does it. I'm downloading ATT JB Stock to try and fix it.. I hope to GOD it works.
Do I need to LGNPST it? If so, is it possible on linux?
If it matters, I flashed the new google bootloader from the rootbox thread.
pivotraze said:
Yes
I redownloaded the Beanstalk ZIP and got a 201.9MB file (I'm in Linux, if that makes a difference.) I am willing to try another ROM (actually, I will just to get a working phone), but how do I connect to TWRP to put a zip on there? I'm not sure where my MicroSD adapter is, I just moved... My fiancee a feature phone that I used to put the original zip on there, but I don't have her phone handy right now...
Even Rootbox does it. I'm downloading ATT JB Stock to try and fix it.. I hope to GOD it works.
Do I need to LGNPST it? If so, is it possible on linux?
If it matters, I flashed the new google bootloader from the rootbox thread.
Click to expand...
Click to collapse
Yikes, there's a few things you could try but I don't feel confidant recommending anything without knowing more.
I'd recommend getting on the irc, #lg-optimus-g on freenode.
I'm pretty sure you can push files to the sdcard in TWRP using ADB.
Sent from my LG-E970 using xda premium
Thank you all for the help I got it fixed yesterday on the IRC by Wade and Autoprime
help
pivotraze said:
Thank you all for the help I got it fixed yesterday on the IRC by Wade and Autoprime
Click to expand...
Click to collapse
can please tell me how you fixed
I flashed a nandroid backup I had
Sent from my AOSP on geeb_att_us using xda premium
Related
The problem started when after I flashed the recovery with Odin. When I booted into the recovery and tried to install the superuser zip file I keep getting this message: "E:cant copy META-INF/google/android/update-binary". I get this message when I try to flash a Rom: "E:Can't open /sdcard/update-unamed-1.3.1-full.zip". I've been trying to flash the CM7 nightlies and the "Unamed" Rom. Any help with this will be much appreciated.
Also, I ended up having to install superuser via SuperOneClick
Honestly, I stopped trying after the phone kept confusing me with SD Card, External Card, and Internal Card/External SD Card BS it was giving me.
I just left my phone rooted, lol.
Sometimes, this tends to happen if you rooted your phone with an anti-virus software running on your PC which can hinder the rooting process. (always the case with my HTC Inspire 4G). So turning it off could allow you to re-download Odin, and run the program again to root it again so it can install the proper files.
Once you get it re-rooted, get into CWM, do a backup, and Clear your Cache, Data and reinstall the ROM from your Internal Card or External Card (which ever you used to place the ROM in).
Good luck.
homescrub said:
Honestly, I stopped trying after the phone kept confusing me with SD Card, External Card, and Internal Card/External SD Card BS it was giving me.
I just left my phone rooted, lol.
Sometimes, this tends to happen if you rooted your phone with an anti-virus software running on your PC which can hinder the rooting process. (always the case with my HTC Inspire 4G). So turning it off could allow you to re-download Odin, and run the program again to root it again so it can install the proper files.
Once you get it re-rooted, get into CWM, do a backup, and Clear your Cache, Data and reinstall the ROM from your Internal Card or External Card (which ever you used to place the ROM in).
Good luck.
Click to expand...
Click to collapse
CWM and root are not even related....
root is root access to your OS /system and its functions. it has nothing to do with RECOVERY or anything outside of a RUNNING OS. i wish everyone would understand that.
as long as CWM is there, AND WORKING PROPERLY, rooting has nothing to do with it. you can flash a new rom from bone stock OS, as long as you have the CWM kernel.
@OP, you have these files (roms) located on the INTERNAL SD right?
I think that's why @homescrub said:
"and run the program again to root it again so it can install the proper files."
Proper files being cwm. As of yet I don't know of a way to install cwm without root on this phone. I know the captivate previously allowed an update to be flashed using stock recovery to get cwm.
Sent from my páhhōniē
Are you clearing your cache before trying to flash zip from sd card? I know I got a similar problem when I didn't clear cache.
Sent from my Samsung GT-I9100
gr8hairy1 said:
I think that's why @homescrub said:
"and run the program again to root it again so it can install the proper files."
Proper files being cwm. As of yet I don't know of a way to install cwm without root on this phone. I know the captivate previously allowed an update to be flashed using stock recovery to get cwm.
Sent from my páhhōniē
Click to expand...
Click to collapse
how do you flash CWM?
through ODIN
that does NOT require root. you dont flash it via ROM manager....so whats the need for root to add CWM?
and what is this 'proper files' crap? you either have CWM or you dont, its not half-assed
nah its cool. im done here. i will let the misinformation fly. let the noobs run in circles. this website is going to **** so fast these days.
No man ....you should help these guys....just lighten up...and I apologize for coming off like that.....and one place I CAN understand is seeing what's going on in the forums....it is chaos sometimes.....I am just tired of seeing noobs who need help get ripped up.....just as much as I am tired seeing noobs posting +1 and Great Job, in the Dev forums. I just think this is the place to help them get a good understanding so there is not another new thread with this same question.
Sent from a HD2 ICS
AntwanL said:
Are you clearing your cache before trying to flash zip from sd card? I know I got a similar problem when I didn't clear cache.
Sent from my Samsung GT-I9100
Click to expand...
Click to collapse
Thanks this really helped!! Lol I can't believe I forgot to do something like this lol I Odined back to FULL stock, flashed the zedomax kernal with root, wiped data and cache, flashed the rom now all is well
Come on guys, you are both better than this. Shake hands, help the OP, and lets make xda a better place..
Just what the title says. It doesn't matter what rom I flash or try to go to a back up ... when I hit reboot system now it brings up the Asus splash then right to cwm recovery. Any ideas fellas? :beer:
No roms or back ups are working.
I was doing a factory reset from settings, went back to my prime and was on cwm recovery.
Sent from my Galaxy Nexus using xda premium
Battery is dying.....
Sent from my Galaxy Nexus using xda premium
Have you tried here bro?
http://forum.xda-developers.com/showthread.php?t=1514088
I looked at that other Thread but I am also confused and getting very upset that I might have ruined my new tablet. I installed CWM etc and everything was fine. I was trying to install the Primalicious ROM and thought I followed everything exactly like it said... I got up to where it says "install from SD Card." Little did I know that they meant internal memory.... I had the zip on the removable SD Card and not internal memory, so I have nothing to flash! I am able to get to the CWM Recovery Screen but I can't load the removable SD Card etc... If I restart, it gets stuck on the Splash Screen and doesn't do anything... I tried adb but I can't seem to get it to work right (on my Mac and PC). It can't find my tablet. I hope there's a way to fix this, so if you know please lend a helping hand here. I tried reviewing the other thread but just very upset and frustrated here so I apologize if I missed the answer.
The only ****ing device I've bricked! And! The only device I've had where I didn't think it needed to be rooted or a custom rom. I had to root it, unlock it and put a custom recovery on it. What a dumb ass I am. I'll figure this out but a little help would be nice peeps!
Sent from my Galaxy Nexus using xda premium
Think I'm OK.
Sent from my Galaxy Nexus using xda premium
antnyp85 said:
I looked at that other Thread but I am also confused and getting very upset that I might have ruined my new tablet. I installed CWM etc and everything was fine. I was trying to install the Primalicious ROM and thought I followed everything exactly like it said... I got up to where it says "install from SD Card." Little did I know that they meant internal memory.... I had the zip on the removable SD Card and not internal memory, so I have nothing to flash! I am able to get to the CWM Recovery Screen but I can't load the removable SD Card etc... If I restart, it gets stuck on the Splash Screen and doesn't do anything... I tried adb but I can't seem to get it to work right (on my Mac and PC). It can't find my tablet. I hope there's a way to fix this, so if you know please lend a helping hand here. I tried reviewing the other thread but just very upset and frustrated here so I apologize if I missed the answer.
Click to expand...
Click to collapse
When you go to install from SD check both /download paths for the internal zip.
Probably a dumb question but did you make a nandroid?
Sent from my Galaxy Nexus using xda premium
ATGAdmin said:
Have you tried here bro?
http://forum.xda-developers.com/showthread.php?t=1514088
Click to expand...
Click to collapse
Thanks buddy! I think that will do the trick. Off from work tomorrow and will give it a shot.
Sent from my Galaxy Nexus using xda premium
chefdave12118 said:
When you go to install from SD check both /download paths for the internal zip.
Probably a dumb question but did you make a nandroid?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I checked every path that it lets me check. The problem was that I didnt download directly from my Prime. I had downloaded it onto my computer and then copied the file to the external SD Card, and CWM does not let me get to the external sd card, only internal memory...
And no, not a dumb question but dumb answer, I did not make a nandroid backup because I'm a [email protected] and forgot. I was just following the instructions late last night and didnt even think about the back up.
*EDIT* I was able to get ADB to work, and it recognizes my tablet... Anyone know how I can push the file onto my tablet? I don't know the directory I should put it in.
Ahh. ****! I'll be working on mine all day tomorrow... I'll see if I can find anything for ya.
Sent from my Galaxy Nexus using xda premium
antnyp85 said:
I checked every path that it lets me check. The problem was that I didnt download directly from my Prime. I had downloaded it onto my computer and then copied the file to the external SD Card, and CWM does not let me get to the external sd card, only internal memory...
And no, not a dumb question but dumb answer, I did not make a nandroid backup because I'm a [email protected] and forgot. I was just following the instructions late last night and didnt even think about the back up.
*EDIT* I was able to get ADB to work, and it recognizes my tablet... Anyone know how I can push the file onto my tablet? I don't know the directory I should put it in.
Click to expand...
Click to collapse
Put the rom zip file in the same directory as adb, then do this:
adb push [name of rom].zip /mnt/sdcard/
Go back to CWM and you should see the rom on your sdcard. There is a pretty good walk through of adb here:
http://forum.xda-developers.com/showthread.php?t=1427008
paddycr said:
Put the rom zip file in the same directory as adb, then do this:
adb push [name of rom].zip /mnt/sdcard/
Go back to CWM and you should see the rom on your sdcard. There is a pretty good walk through of adb here:
http://forum.xda-developers.com/showthread.php?t=1427008
Click to expand...
Click to collapse
Awesome! Thanks for the help!
Sent from my Galaxy Nexus using xda premium
Worked like a charm! Thanks!
Sent from my Galaxy Nexus using xda premium
I know I just have missed the thread and/or I am not searching for the correct words, but could someone help me find how to restore a rooted nook Tablet running CM9 alpha.05 to the out of box user experience?
My recovery is twrp 2.2 and I'm not very familiar with it or even cwm for that manner in how to restore and unroot.
Any and all help is very much appreciated and sorry for posting this if there is another thread somewhere.
downsay said:
I know I just have missed the thread and/or I am not searching for the correct words, but could someone help me find how to restore a rooted nook Tablet running CM9 alpha.05 to the out of box user experience?
My recovery is twrp 2.2 and I'm not very familiar with it or even cwm for that manner in how to restore and unroot.
Any and all help is very much appreciated and sorry for posting this if there is another thread somewhere.
Click to expand...
Click to collapse
Well since you have a custom recovery the only way you can get to stock is to use adamoitlers total wipe flash back to stock and root from there. You could try flashing some stock recovery but it is a bit risky IMO.
Sent from my Nook Tablet CM7 BETA using xda premium app
8GB or 16GB model?
Cubanluke88 said:
8GB or 16GB model?
Click to expand...
Click to collapse
16gb
Here ya go
You'll need to do one thing before you do any of that and thats get clockworkmod recovery on there first. You should be able to use indirect's app to flash recovery to do that.
Cubanluke88 said:
Here ya go
You'll need to do one thing before you do any of that and thats get clockworkmod recovery on there first. You should be able to use indirect's app to flash recovery to do that.
Click to expand...
Click to collapse
I flashed cm7 without flashing cwm and am now in a boot loop. Any ideas ?
I have a 16 gb trying to go from cm9 back to cm7
sailerph said:
I flashed cm7 without flashing cwm and am now in a boot loop. Any ideas ?
I have a 16 gb trying to go from cm9 back to cm7
Click to expand...
Click to collapse
Did you flash cm7 from clockworkmod running off an sdcard?
Cubanluke88 said:
Did you flash cm7 from clockworkmod running off an sdcard?
Click to expand...
Click to collapse
Yes, After flashing cm7 and gaaps,wipe and re-boot I'm in bootloop. For now I am running cm7 off sd card fine, but hope to fix internal ? Also, while in cmw from sd card, I get the error message after flashing "can't mount E recovery". There is probably the culprit ?
I'm not sure to be honest. Try flashing a different rom and see if you can boot.
You could also flash the zip for internal clockworkmod if you like, via the sdcard clockworkmod.
sailerph said:
Yes, After flashing cm7 and gaaps,wipe and re-boot I'm in bootloop. For now I am running cm7 off sd card fine, but hope to fix internal ? Also, while in cmw from sd card, I get the error message after flashing "can't mount E recovery". There is probably the culprit ?
Click to expand...
Click to collapse
That is normal after flashing rom on this device.
Cubanluke88 said:
I'm not sure to be honest. Try flashing a different rom and see if you can boot.
You could also flash the zip for internal clockworkmod if you like, via the sdcard clockworkmod.
Click to expand...
Click to collapse
Thanks for the help thus far, but none of the above work. I also tried the repart.img from Raywaldo tutorial and it doesn't finish.I also tried AdamOutler wipe/ubunto method and it gets stuck at writing zeros to mlo. The roms seem to flash ok, but can't boot into it without a loop. I suspect partitions are messed up if someone can point me in the right direction. So it looks like TWRP caused this when reverting to cm7 from cm9 Thanka again
sailerph said:
The roms seem to flash ok, but can't boot into it without a loop. I suspect partitions are messed up if someone can point me in the right direction. So it looks like TWRP caused this when reverting to cm7 from cm9 Thanka again
Click to expand...
Click to collapse
If it is a partition issue, then this thread should be able to help:
http://forum.xda-developers.com/showthread.php?t=1570022
The first method worked for me, although I did flash a clean CM7 install instead of 1.4.2 at the end.
Also, you shouldn't need to make a.CWM sd card, since you can reach recovery.
Just download "acclaim_update.zip" from XDA and then go in and navigate to "updater_script" which is located in "META-INF/com/google/android/" edit the first two lines and where it says "blaze" change to "acclaim" on both lines and update your zip file or rezip it whatever you do and you can now flash it in CWM or TWRP.
mamifsidtect said:
Just download "acclaim_update.zip" from XDA and then go in and navigate to "updater_script" which is located in "META-INF/com/google/android/" edit the first two lines and where it says "blaze" change to "acclaim" on both lines and update your zip file or rezip it whatever you do and you can now flash it in CWM or TWRP.
Click to expand...
Click to collapse
So how do I edit those lines ? I can view it in Winrar, but how do I edit it exactly. It won't let me simply cut and replace Thanks
sailerph said:
So how do I edit those lines ? I can view it in Winrar, but how do I edit it exactly. It won't let me simply cut and replace Thanks
Click to expand...
Click to collapse
I'd recommend getting something like notepad++ as notepad will not display the file very cleanly, and wordpad will add extra characters. Extract the file out of the zip, to say your desktop. Open it with notepad++. Edit what you like, save the file. Drag it back into the original place in the zip. Winrar will update the file in the zip. Make sure you extract the file though, if you try opening it directly from the zip, you're just going to be working on a temp copy of the file.
If you suspect that your partitions are messed up there are some threads about repartitioning. You can follow them up until you're supposed to start changing partitions to see if yours are the same as what their original ones were.
Can you boot the internal recovery still? I've seen a few posts about the CWM that come with CM7 and CM9 not being compatible with the other version. Perhaps try Indirect's Flasher.
Next time though, you should ask your question in a new thread since it's not really on topic with the OP and thread topic. Your question refered to a bootloop... The OP referred to returning to stock. By keeping the threads on topic to their content, it helps make searching easier for other people who may need the help.
Yes, notepadd++ --> On its menu, go to edit, and then to Eol Conversion to choose between :
windoze - cr/lf - od/oa ( hex )
unix - - lf - oa
mac - - cr - od
.
( of course ) we want the second choice...
ShinnAsuka said:
Well since you have a custom recovery the only way you can get to stock is to use adamoitlers total wipe flash back to stock and root from there. You could try flashing some stock recovery but it is a bit risky IMO.
Sent from my Nook Tablet CM7 BETA using xda premium app
Click to expand...
Click to collapse
That worked but I can't register with B&N. We need noob instructions on getting the correct serial # back in the tablet Thanks
sailerph said:
That worked but I can't register with B&N. We need noob instructions on getting the correct serial # back in the tablet Thanks
Click to expand...
Click to collapse
you can bypass registration by pressing on certain parts of the screen. look it up in one of the threads or on youtube.
Sent from my Nook Tablet CM7 BETA using xda premium app
ShinnAsuka said:
you can bypass registration by pressing on certain parts of the screen. look it up in one of the threads or on youtube.
Sent from my Nook Tablet CM7 BETA using xda premium app
Click to expand...
Click to collapse
Thanks, but I don't understand. What good is stock without registration ?
sailerph said:
Thanks, but I don't understand. What good is stock without registration ?
Click to expand...
Click to collapse
oh I thought you just wanted a custom rom experience. my bad. never mind...
Sent from my Nook Tablet CM7 BETA using xda premium app
hi ,
i try to flash a new rom from the phone turned out that was not the correct zip file i downloaded. now i wiped cache and system and when i try to system boot it says no os so i cannot boot again. basically i'm stuck in twrp. can somebody please help. how should i flash new rom ?
Did you not make a backup?
Sent from my LG-E970 using xda app-developers app
Not sure if this is what you need,a member here much smarter than I told me this about my E970 when it was unplugged before the backup was made.
In the end these phones are basically unbrickable, so you can always get into download mode (Vol up + Vol down +usb cable +power) and use LGNPST to restore back to stock. LGNPST info can be found on irc
I do not know what irc is but there ya go,google away and hope it works .
I don't completely understand what I'm doing when I'm doing things to my phone. All I know is that some pretty great people with a much better understanding of the inner workings of phones tell me to do this or that. On that note, why are people so quick to say their phone is bricked when they still have a phone that will boot into something? Anyway...
What if you try removing the sd card, use another phone or an adapter for a pc, to download a rom to it. Put it back in your phone boot into recovery and flash it.
Or use that LGPNST, or whatever you call it, method...
Sent from my LG-E970 using xda app-developers app
Murasakiii said:
Did you not make a backup?
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
i guess not.
TangoXray said:
I don't completely understand what I'm doing when I'm doing things to my phone. All I know is that some pretty great people with a much better understanding of the inner workings of phones tell me to do this or that. On that note, why are people so quick to say their phone is bricked when they still have a phone that will boot into something? Anyway...
What if you try removing the sd card, use another phone or an adapter for a pc, to download a rom to it. Put it back in your phone boot into recovery and flash it.
Or use that LGPNST, or whatever you call it, method...
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
hi thanks for the reply,
i did took out the sd card and put att stock rom from xda forum but somehow i cannnot flash it from external sd card . when i try to install it keeps up opening the file instead of asking to flash or install. and i'm not sure what LGPNST means . does it work with mac ?
Bababooey said:
Not sure if this is what you need,a member here much smarter than I told me this about my E970 when it was unplugged before the backup was made.
In the end these phones are basically unbrickable, so you can always get into download mode (Vol up + Vol down +usb cable +power) and use LGNPST to restore back to stock. LGNPST info can be found on irc
I do not know what irc is but there ya go,google away and hope it works .
Click to expand...
Click to collapse
i tried this but all it says is download mode do not plug the phone. please help
kishanyonzan said:
hi thanks for the reply,
i did took out the sd card and put att stock rom from xda forum but somehow i cannnot flash it from external sd card . when i try to install it keeps up opening the file instead of asking to flash or install. and i'm not sure what LGPNST means . does it work with mac ?
Click to expand...
Click to collapse
There should be two choices, flash from internal and flash from external. Did you choose the correct one?
Sent from my Nexus 7 using Tapatalk HD
robstunner said:
There should be two choices, flash from internal and flash from external. Did you choose the correct one?
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
yes, i choose the rgt now cuz i can see the attstock which is name of the folder. researching a litlle bit i dont think we can flash it from the
sd card but can from adb sdk whatever. but i cannot seem to figure out head or tail even if i read the steps .
kishanyonzan said:
yes, i choose the rgt now cuz i can see the attstock which is name of the folder. researching a litlle bit i dont think we can flash it from the
sd card but can from adb sdk whatever. but i cannot seem to figure out head or tail even if i read the steps .
Click to expand...
Click to collapse
If you are in TWRP you could use the file manager under advanced to try and move the .zip to internal memory. Then see if you can flash.
But I always flash from external and never have issues.
You may have a corrupt .zip, maybe try downloading it again and then try again.
I had an issue where my SD card wasn't Fat32 so TWRP wouldn't put anything on the SD or boot anything off the SD. I can't remember if I could browse the folders with TWRP's file manager or not though. That's not much help I know, but might be worth looking into. You can try formatting your SD as Fat32, loading the stock ROM on it, then see if TWRP will flash it.
bleached45 said:
If you are in TWRP you could use the file manager under advanced to try and move the .zip to internal memory. Then see if you can flash.
But I always flash from external and never have issues.
You may have a corrupt .zip, maybe try downloading it again and then try again.
Click to expand...
Click to collapse
That was my next question, what zip, exactly, are you using?
Sent from my LG-E970 using xda app-developers app
http://webchat.freenode.net/?channels=lg-optimus-g
Go there, ask for help using lgnpst.
TangoXray said:
That was my next question, what zip, exactly, are you using?
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
i;m not really sure . I downloaded from xda lg android development .
bleached45 said:
If you are in TWRP you could use the file manager under advanced to try and move the .zip to internal memory. Then see if you can flash.
But I always flash from external and never have issues.
You may have a corrupt .zip, maybe try downloading it again and then try again.
Click to expand...
Click to collapse
I tried it but it says unable to mount usbotg . thank you for you reply
. any suggestion what should i do next.
http://webchat.freenode.net/?channels=lg-optimus-g
...
kishanyonzan said:
I tried it but it says unable to mount usbotg . thank you for you reply
. any suggestion what should i do next.
Click to expand...
Click to collapse
That error will always happen. You can safely ignore it.
Wait so if you can get to TWRP why not just push the zip you need using ADB?
Sent from my LG-E970 using xda premium
i can send the files to external card but can anyone suggest me the installer.zip file so that i can flash the rom . i cannot seem to the flash the file even if i have in the internal storage?
Thank you all you guys XDA FAMILY for helping me . I finally fixed my phone installing the stock Rom through LGPNST .
Sent from my LG-E970 using xda app-developers app
Hello all, I am looking for a little advice. I'll give as much backstory as possible:
I used the cyanogenmod one click installer, everything went well. Since the one click installer put twrp on I went and put clockworkmod on since im more familure with it. Everything fine restarted and phone worked however after I installed (attempted to install facebook messeger) the device rebooted and would not come back on. Sat for 5 mins vibrating over and over and over. Its not completely dead I am able to get to recovery and to download mode and believe I just had a bad download/install. Since i have Clockworkmod on here, I am thinking I could just install the most up to date stable rom available but I have a question:
How do I put the rom zip files on phone if phone wont come on.
Any advice towards this would be appreciated.
First off, where did you find a cyanogenmod one click installer? Possibly that was not meant for the I717.
Don't you have an external micro sd card? Place the card in your computer and copy the ROM zip to it. Put it back in your phone and use it to flash.
Agoattamer said:
First off, where did you find a cyanogenmod one click installer? Possibly that was not meant for the I717.
Don't you have an external micro sd card? Place the card in your computer and copy the ROM zip to it. Put it back in your phone and use it to flash.
Click to expand...
Click to collapse
Sure thank you for the reply, from beta . download . cyanogenmod . org /install apparently it detects your phones version and does everything for you really, no option to pick your model/version # it auto detects. sorry for spaces it wouldnt let me post link complete.
And I did not know I could put the zips on external SD I had though only internal SD is option for where to put roms
GregariousKrisp said:
Sure thank you for the reply, from beta . download . cyanogenmod . org /install apparently it detects your phones version and does everything for you really, no option to pick your model/version # it auto detects. sorry for spaces it wouldnt let me post link complete.
And I did not know I could put the zips on external SD I had though only internal SD is option for where to put roms
Click to expand...
Click to collapse
Can put anything there.
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
I just wanted to say thank you for your replies, everything is up and running.
GregariousKrisp said:
I just wanted to say thank you for your replies, everything is up and running.
Click to expand...
Click to collapse
Thanks for reporting back that everything is up and running. Not many people do. Can you do me one more favor? Can you change the title to include [solved] please. This way people with similar problems will know this thread may solve their situation.
Thanks
440bro said:
Thanks for reporting back that everything is up and running. Not many people do. Can you do me one more favor? Can you change the title to include [solved] please. This way people with similar problems will know this thread may solve their situation.
Thanks
Click to expand...
Click to collapse
Sure, I'm not sure why no one comes back if people take the time to reply and help them, a thank you is the least they could do.