Whatever Flo
What is it: Stock android kernel, JSS15J, absolutely no changes besides the overclock. No fancy features, no snake oil, no bloat, clean stock experience.
Overclock not customisable, baked right into the kernel and loaded on boot, no CPU/GPU management apps needed.
I take no responsibility or imply any warranty for the use of this kernel, use of this kernel is completely at your own risk.
If a build doesn't work for you try the lower clocked version, still not then you're out of luck and your CPU can't handle the overclock sorry. If there is enough demand I can build a lower clocked edition but I don't really see the need. Any problems or questions I will try to answer for you.
Proof is in the Source
Flash zips with TWRP/recovery of your choice
1890MHz Build + GPU OC: http://d-h.st/y0W
Vellamo metal score: ~830
GFXBench:
T-Rex 18fps
1009 Frames
Egypt 46fps
5068* Frames
1890MHz Build No GPU OC: http://d-h.st/9yr
Vellamo metal score: ~830
GFXBench:
T-Rex 16fps
889 Frames
Egypt 41fps
4653* Frames
1728MHz Build + GPU OC: http://d-h.st/95k
Vellamo metal score: ~800
1728MHz Build No GPU OC: http://d-h.st/hmZ
Vellamo metal score: ~800
* Sections of demo limited by VSync
If you like, give me a thumbs up!
Thanks and enjoy your nexus.
Change Log
Code:
Aug 4 2013:
- Added GPU OC option
Aug 3 2013:
- Added CPU Overclock builds
Very nice. Do you intend to add GPU OC as well? I think with this kernal with GPU OC it would play nicer with Clean ROM than the current Kernels. Just my opinion but Jassy kernel doesn't seem to like CR as much as Cm 10.2 so I would really like to see what stock with extra OC's does for that very nice Rom .
conan1600 said:
Very nice. Do you intend to add GPU OC as well? I think with this kernal with GPU OC it would play nicer with Clean ROM than the current Kernels. Just my opinion but Jassy kernel doesn't seem to like CR as much as Cm 10.2 so I would really like to see what stock with extra OC's does for that very nice Rom .
Click to expand...
Click to collapse
Yes I am planing on it, doing some stability and performance tests right now. Will release it when I finish that.
WhiteDawn said:
Yes I am planing on it, doing some stability and performance tests right now. Will release it when I finish that.
Click to expand...
Click to collapse
You are awesome. This is what I've always wanted in a kernel.
CPU, GPU OC and voltage control.
Thanks!
New builds up, now include GPU overclock.
Great kernel, no issues on stock ROM whatsoever. Seems like GPU scores went down a tad though, with no oc and oc versions of the 1.7ghz, looks like it went down 1k pts on 3d score in antutu.
Maybe add a little higher oc on the GPU to test out with the 1.7ghz version?
Could you confirm with me, I have the 1.7+GPU oc version and my 3d graphics score seems to be lower, I was around 7k for stock clocks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks!
Sent from my Nexus 7 using Tapatalk 4
Philaphlous said:
Great kernel, no issues on stock ROM whatsoever. Seems like GPU scores went down a tad though, with no oc and oc versions of the 1.7ghz, looks like it went down 1k pts on 3d score in antutu.
Maybe add a little higher oc on the GPU to test out with the 1.7ghz version?
Could you confirm with me, I have the 1.7+GPU oc version and my 3d graphics score seems to be lower, I was around 7k for stock clocks.
Thanks!
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Thanks for the heads up, I haven't tried using antutu for my benchmarking and I ran most of my testing on the 1.8 build since I just assumed dropping the clocks down wouldn't make much of a difference. I'll look into it.
Any Chance of a JSS15Q Version?
Felnarion said:
You are awesome. This is what I've always wanted in a kernel.
CPU, GPU OC and voltage control.
Thanks!
Click to expand...
Click to collapse
Yeah that would be peachy if JSS15Q based. I was on jassy's earlier (with JSS15J) and the GPU boost was noticeable, but back on stock to fix the multitouch.
hey .
i tested the 1,7ghz+450mhz gpu kernel and its running fine .
But it would be so cool if u could make one more kernel with just GPU overclock because i think the CPU power of the n7 is fine with 1.5ghz .
but the 50mhz more in GPU frequency will be more noticable .
i hope its not to much work for you... otherwise i will be fine with running the 1,7ghz edition.
thanks
I really liked this kernel, but when I flashed it after the latest cm 10-18 nightly, it caused a corrupt display upon booting. Fortunately I had made a nandroid backup a few weeks earlier so I was able to get it working again after restoring the system partition. I'm afraid to try flashing this again..
Related
33% 0C Kernel is finished and 2900+ Quadrant has been benched.
Disclaimer
As I HAVE NOT tested Uruk 0.2 I can't verify it's compatibility!
As I have not tested this on other CPU's I can not guarantee stability!
I will try to help you as much as I can if anything goes wrong, but I can't promise a fix.
Download
http://dl.dropbox.com/u/13655025/zImage
Features
5 slots {300MHz, 600MHz, 1000MHz, 1250MHz, 1330MHz}
300MHz, 600MHz, 1000MHz undervolted
1250MHz at the voltage 1000MHz was working on
1330MHz at the voltage that was said to be a very safe voltage for this cpu (droid x users have been using voltages 0.1V+ higher!)
EXT4 support and therefore support for Uruk 0.1 (and I suppose Uruk 0.2? need confirmation on that since I'm using a modified Uruk 0.1)
Usage
To use this kernel please set your SetCPU at 300-1330 (1250 if 1330 appears to be unstable for you)
The Archos stock video player seems to override SetCPU settings when using the 5th slot as the lowest cpu frequency.
The Archos stock video player will not play video when started with the frequency above the 4th slot (I think, I'm quite sure of that) it will then override the DSP frequency which will not suffice for video decoding (also speculation). I fix this by running a SetCPU 300-1330 with an ondemand governor (which seems to me, the most useful governor anyway)
Result
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This score was gained with a 1330MHz performance governor. (this is stable for me in games and other apps, only problem is the Archos media player)
Risk
This has been undervolted, overclocked and tested on MY device!
Each CPU made, although the same model is unique. There is a possibility that these clocks are far to unstable to use on your device, so please!
This may harm you CPU AND/OR BATTERY use at your own risk!
Post your results! Describe crashes as accurate as possible if there are any.
I can then release a second version that's more stable for everyone's device.
Thanks for your instructions.
Actually, I do the same as yours in my kernel except that I keep stock voltage when using 1100Mhz
{S1100M, VDD1_OPP5, 0x3c, 0x0, 0x0},
At least, we have proved that we are modifying the same file
ardatdat said:
Thanks for your instructions.
Actually, I do the same as yours in my kernel except that I keep stock voltage when using 1100Mhz
{S1100M, VDD1_OPP5, 0x3c, 0x0, 0x0},
At least, we have proved that we are modifying the same file
Click to expand...
Click to collapse
I think it should be stable at stock, the DSP is just being a ***** lol.
Have you guys identified the max voltages for these components? I would not want to have a device damaged due to overvolting. I do understand there is a risk but go over the max is typically not acceptable to any over clocking.
One other thing how are you validating stability? In otherwords what program are you using to induce load?
Tzbob said:
I think it should be stable at stock, the DSP is just being a ***** lol.
Click to expand...
Click to collapse
I'm testing stability now by running the programs that gave problems with the previous overclocking attempts, Angry Birds, stock Movie player(this one is the real *****), Linpack, Quadrant and SetCPU 'stress' test
I have not yet identified the maximum voltage as I can't seem to find a datasheet that says anything about this, I've been slowly up to 1.4V volts now to see if how warm it gets etc.
Stable 1250MHz is done, now incrementing in steps of 10MHz, I'll have a kernel release soon with undervolted and overclock slots.
UPDATE: http://code.google.com/p/milestone-overclock/wiki/KernelModule
They seem to use very high voltages O.O they say the maximum vsel is 96 as well
my 1250MHz clock is stable at vsel 64, I'm faiiiirly sure we have the same OMAP3630_1000's in our devices?
Im curious how did you overcome the DSP issue?
I still haven't really sorted the DSP issue with the Archos media player, a work-around is using a governor that allows a frequency below the last slot, I THINK
It's all speculation but it seems to work, when I have the 1250MHz as the 5th slot with my frequency on 1250MHz videos do not play. Using the same settings with the 1250MHz parameters on the 4th slot it does, the media player seems to be a very weird thing.
How is the battery performance?
I'll try this with Uruk 0.2, and let you know how it goes after some use!
Edit: After running quadrant, there doesn't seem to be any difference in score (1658)
But it is running smoothly with no noticable bugs at the moment.
Thanks Tzbob.
Can you tell us the frequency to voltage settings that you have changed? Let us find out together the max. stable frequency of archos CPU
ardatdat said:
Thanks Tzbob.
Can you tell us the frequency to voltage settings that you have changed? Let us find out together the max. stable frequency of archos CPU
Click to expand...
Click to collapse
After doing some reading on Droid forums it seems that each CPU behaves very differently, but they also succeeded in huge undervolts and OCs of 1.3GHz.
The N900, although an older version of this cpu sports an overclock on both CPU and DSP so perhaps that's something we could do? Also GPU OC is still something that could be considered but for now, this will have to do^^
/*OPP1 - 0.9875V STABLE 300*/
{S300M, VDD1_OPP1, 0x1e, 0x0, 0x0},
/*OPP2 - 1.15V STABLE 600*/
{S600M, VDD1_OPP2, 0x2b, 0x0, 0x0},
/*OPP3 - 1.3375V STABLE 1000*/
{S1000M, VDD1_OPP3, 0x38, 0x0, 0x0},
/*OPP5 - 1.375V STABLE 1250*/
{S1250M, VDD1_OPP4, 0x3c, 0x0, 0x0},
/*OPP5 - 1.4V STABLE 1330*/
{S1330M, VDD1_OPP5, 0x42, 0x0, 0x0},
Ignore the voltage in the comments as I haven't gotten around calculating them yet.
Please how do you set undervoltage cpu options? Thanks a lot
mindsurfer said:
Please how do you set undervoltage cpu options? Thanks a lot
Click to expand...
Click to collapse
The undervolted options are added into this kernel, by using it you will be using an undervolted cpu.
If you strictly want to use undervolted cpu options and refrain from any overclocks please use SetCPU from 300-1000MHz.
it is very dangerous for the tablet to increase a CPU !
cajl said:
it is very dangerous for the tablet to increase a CPU !
Click to expand...
Click to collapse
It is dangerous for any device to increase the CPU, I haven't denied, or stated something else, anywhere.
You should do this at your own risk as it may harm your CPU/Battery/Overall device.
It's dangerous to overclock anything, yet it's such a common thing to do.
yes !
mark in red this option !
but thank you fot that
Please would it be posoble to make only 300,1000,1250,1333 undervolted version? I mean specially without 600 mhz, because i think that it makes archos less fluent.. comparing to only 300/1000 original urukdroid version. Or maybe changing 600 to 800?
I'm working with sauron now to add functionality to the official Uruk kernel. We'll add more testing to it than I did with this kernel to assure good performance.
I won't bring out any more kernels as I hit the limit on this one, 1330MHz is the maximum I could get (without getting really dangerous). It's also overkill and purely for benching high scores
I have successfully overclocked the new Samsung Galaxy S II to 1.504GHz. This speed is enough to allow it to achieve really high benchmark scores like over 4000 points in Quadrant! 1.5GHz is a 25% overclock and makes this fast phone even faster and snappier in day to day usage.
Instructions:
1. You'll need the latest version of odin3 and the USB drivers for Windows. jutley's post on debranding the phone has links to both: http://forum.xda-developers.com/showthread.php?t=1064894
2. Grab the kernel. It is a tar file for odin with the overclocked kernel and a initramfs with proper modules for the kernel: http://setcpu.com/files/galaxysii_oc_v1.tar
3. Reboot the phone into download mode using ADB:
adb reboot download
4. Flash the kernel using odin3 by placing the tar file in the PDA section and pressing "Start."
5. The phone will reboot automatically.
6. Use SuperOneClick to root your phone if you haven't already. ADB should have root access with this kernel so it'll just work.
7. Grab SetCPU and try 1.504GHz.
Source code (with relevant commit for the overclock. I also enabled the interactive governor in the config): https://github.com/coolbho3k/galaxysii_oc
I haven't gone crazy on the voltages - 1.504GHz is stable at 1375mV on my device. Depending on your device, there may be even more headroom. I've gotten speeds of up to 2GHz to boot with instability (my unstable 1.8GHz Linpack run is currently in the Linpack top 10), but at very high voltages and temperatures. Leave it up to other developers to give you higher/more dangerous frequencies and voltages. If you stress the CPU a ton the phone will become hot to touch (though it does to a certain extent even at stock frequencies - there is not much thermal insulation between the processor and your hands in such a thin phone).
Current features in this kernel: Added 1.504GHz overclocking step (default frequency is still 1.2GHz for safety - use SetCPU to safely raise the frequency) and relevant modifications, 800MHz sleep death fix, interactive governor, ro.secure = 0.
The usual disclaimers apply here. Only do this if you know what you're doing. Though the long term stability/reliability of similar overclocks on other Android based ARM devices is known, this software is provided with no warranty, and I can't be held responsible if you fry your device.
Video:
A 1.504MHz overclock:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
...breaks over 4000 points in Quadrant:
...and almost 60 MFLOPS in Linpack:
Since Linpack and Quadrant aren't (sufficiently?) multithreaded, you won't see that much improvement over single core Cortex A8 devices at the same clock. But these are dual core phones!
Developers: keep in mind that the Galaxy S II source currently "fixes" voltages on this revision of the Exynos to be 25mV less than what is in the table. Upon boot, the driver will actually print the real voltages at each level (look for ASV voltage_table in the kernel log) if you don't know which chipset revision a particular phone has. The overclock itself is controlled in the s5pv310_apll_pms_table.
Enjoy!
Damn .........
This is when I really wish I had a SGS2. Can't wait till it comes to American shores, great work coolbho, see you on Engadget tomorrow..
OMG already? I was wondering when this would happen. God bless you man.
Wonderful work man. Can't get Odin to download on my home rig so I'll be playing around w/ this tomorrow at the office With overclocking already here and the inevitable kernel optimizations to come, this phone is truly going to be the beast everyone suspects.
Thanks man!
..and what about undervolting?
WOW, nice work
Thanks!
Holy crap, nice work! How much hotter is it getting in the back of the phone at 1.5ghz?
Sent from my GT-I9100 using Tapatalk
Very good job here mate. It's about time somebody attempted to overclock such a sweet phone.
I will flash this with Odin tonight.
Again, great job & thanks
Not bad eh?
rovex said:
Not bad eh?
Click to expand...
Click to collapse
how you getting that score im getting just above 4000
Haha well played
coolbho3000 said:
Current features in this kernel: Added 1.504GHz overclocking step (default frequency is still 1.2GHz for safety - use SetCPU to safely raise the frequency) and relevant modifications, 800MHz sleep death fix, interactive governor, ro.secure = 0.
Click to expand...
Click to collapse
What is the 800MHz sleep death fix?
Can someone run this overclock against AnTutu Benchmark as well please ....i find this a little more stable than quadrant.
Ty
S
Sent from my GT-I9100 using XDA App
Very impressive indeed. The only question that comes to mind is if there really is a need to squeeze out higher frequencies. The CPU isn't really a bottleneck on the SGS2, is it?
MrDeacon said:
Very impressive indeed. The only question that comes to mind is if there really is a need to squeeze out higher frequencies. The CPU isn't really a bottleneck on the SGS2, is it?
Click to expand...
Click to collapse
CPU is always a bottleneck for calculations. Probably not a bottleneck in most apps though.
My install went smoothly. Quadrant showed 4144, 3892, and then 4100. Im going to try running it throughout today and see what happens. Cant wait for this to mature.
WOW.! Flashing right this second.! You people are geniouses.!
Sent from my GT-I9100 using Tapatalk
just wanted to add
oh crap.. i just realized who posted this, its Mr. Overclock himself, the creator of SetCPU... woo we have a star in our mits!
We all own one of the most powerful smartphone to date. With great custom Rom's and kernels available, we get some of the highest benchmarks.
So now it's time to show them off!!
Post your:
- Quadrant
- CF-Bench
- AnTuTu
scores here.
Briefly describe the Rom/kernel you're using along with Ext4 (w/ or w/o journaling)/Ext3/CM7 partitions as well as mentioning if it is stock or OC'ed frequency.
Even if you don't have the highest benchmarks, feel free to share them! CM7 gets higher benchmarks than other Rom's anyway.
Highest Benchmarks will be posted on #2 for both OC and stock clocks. So it's a bit like a competition.
Bare in mind these three things:
Please post screenshots! Don't give numbers or your score will NOT be shown on #1/2!
Please upload in either qHD or resize to 640x480. Anything LESS will not be shown on #1/2!
Even if your score doesn't beat the ones on #1/2, FEEL FREE TO UPLOAD THEM ANYWAY!! In general, CM7 gets higher scores anyway, so DON'T be put off!
Good luck!
Highest Results for OC'ed
Quadrant:
by "elbscorp"
ATT 236.45.141 Deodexed
Faux123's 1.45hz kernel
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CF-Bench:
by "95rr900"
NottachTrix 1.2.9b
Kholk's 1.5Ghz OC kernel
AnTuTu:
by "totti123456"
Clemsyn's Elite Combo ROM 7.2
Clemsyn's 1.6Ghz Elite kernel
Highest Results for Stock Clocks
Quadrant:
By 'euplio'
Neutrino based EE ROM
Stock CM7 (EE) Kernel
CF-Bench:
By 'Notorious544d'
Aura 1.2.2.1
Ext4 w/o journaling and w/ Extents
Faux's 0.2.1 Enhanced Kernel
AnTuTu
By 'MrCoolBear'
CM7 Ba2tf
Faux123 0.2.3 Enhanced Kernel
This sounds interesting enough, I'm in! Although I never seem to get as high of scores as most of the ones I see, even though I try to follow all the advice I find...
Alien#4 (with theme)
EXT4 (I think its with journaling, whichever is stabler but lower performance)
OC @ 1.3
AnTuTu: 5364
CF-Bench: 6087
Quadrant: 3346
I don't know if these are accurate, though. For some reason the Java scores in CF-bench were WAY too low (like, below stock Atrix levels), and I don't know if the other benchmarks take that into account.
CM7 beta with 0.2.0 kernel from faux overclocked to 1.3GHz
Quadrant: 3962
AnTuTu: 5981
CF-Bench: 5940
Smartbench 2011: Productivity 4345 Gaming 2828
DarkSide 2.0 with faux123 0.2.0 at 1.3gz.
Impressive results from a lot of people, however, can you please upload screenshots? It'll look better and cleaner on #1/#2.
Thanks.
useing alien v4 faux v2.0 0c 1.3
running alien v4 @1.2 faux 1.3 oc kernal Sent from my MB860 using xda premium
ltdanno360 said:
running alien v4 @1.2 faux 1.3 oc kernal Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Nice score, but Nottach's score is BEASTLY! Btw, why are java scores so low sometimes?
Here my scores:
Quadrant: 4334
Smartbench: 4232 CPU, 2972 GPU.
CM7 , [email protected] 1.3 ...
Quadrant : 4910 \m/
AnTuTu : 6100 i think...
think i haven't any screenshots :| atrix rocks \m/
PAR3A said:
CM7 , [email protected] 1.3 ...
Quadrant : 4910 \m/
AnTuTu : 6100 i think...
think i haven't any screenshots :| atrix rocks \m/
Click to expand...
Click to collapse
Use 'screen grabber' to take screenshots. Hold down search key to activate.
Running CM7 + Faux123's 2.0 kernel :3
CM7, 1.3GHz OC, stock voltage
Sent from my MB860 using XDA App
neer2005 said:
CM7, 1.3GHz OC, stock voltage
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
i cant believe neer is still alive!
The BadAzz Aura 1212...
Sorry for the late update. Have updated #1 accordingly with new records.
Holy cheese those are some cracking benchmarks!!!
We need more people with stock clocks in here lol.
If anybody posts, despite how low their score might be, they'll be on #2
i just realizee i was running pandora in the background also
alienv4 custom webtop+xfdesktop-xfce4-panel +java pluging in firefox
fauxsv2.0 1.3 oc
CM7 - FAUX [email protected]
So I hate benchmarks but I got bored so I ran a quadrant on my tab...I got 4221...is that a mistake?
wow. seems great to me. I was getting about 2500. I switch my governor to performance and it jumped up to over 3500 though. I've got ally of apps though so I figure not bad for me either. What's you governor set at getting over 4000?
If you see this it was sent using my GT-P7510.
Well guyz You should try a new rom to get High Scores on your quardrent tests
Well Here is a few roms that i used to get high quardrent scores
Paris rom http://forum.xda-developers.com/showthread.php?t=1284355 - Personally I love this rom because it overclockes my Tab and give me 3000++ scores
Starbust Rom http://forum.xda-developers.com/showthread.php?t=1197776 -This one also overclockes your processor to 1.4Ghz and improves I/O and other graphic values
I think This post would helpful for you If so Please Click on Thanks Button
KaFrEEkAbOom said:
Well guyz You should try a new rom to get High Scores on your quardrent tests
Well Here is a few roms that i used to get high quardrent scores
Paris rom http://forum.xda-developers.com/showthread.php?t=1284355 - Personally I love this rom because it overclockes my Tab and give me 3000++ scores
Starbust Rom http://forum.xda-developers.com/showthread.php?t=1197776 -This one also overclockes your processor to 1.4Ghz and improves I/O and other graphic values
I think This post would helpful for you If so Please Click on Thanks Button
Click to expand...
Click to collapse
ok...not to be mean...don't tell me what is helpful or not...
btw: i dont CARE about benchmark scores...AT ALL!!!!!
i just wondered why it was so high since engadget and other review sites say its like 1000.
@benzoman - just stock settings on cm9 preview (rootzwiki)
Running Task 14 overclocked to 1400 here. Couldn't get me to change ROMs for almost anything. Unless it was to an updated Task ROM. I'm running some of pershoots kernel stuff too.
Don't really care about benchmarks myself either. Just thought I'd run the quadrant to see what I got compared to what you got.
As long as it's stable and doesn't lag that's all I care.
Task has always taken VERY good care of me in all aspects of what I want, and need. So that's why I'm so partial to his stuff and suggestions of what to run with his ROMs.
Thanks mate for something to do at least for a few minutes.
EDIT: Just noticed both suggested ROMs are old Task ROMs too. LMAO
Yeah I'm running to change to an older ROM so my scores go up. NOT. :what:
If you see this it was sent using my GT-P7510.
tried many different roms and quadrant scores were different. never felt any difference on daily use of my tab though. Let's face it, we all are affected by that guy on that galaxytabhacks site
davsarus said:
tried many different roms and quadrant scores were different. never felt any difference on daily use of my tab though. Let's face it, we all are affected by that guy on that galaxytabhacks site
Click to expand...
Click to collapse
i know!!!!!
all he does...."alright lets just open up quadrant here and see what we get...2 mins later....alright thats the rom..it only got 2000..screw that..."
lol!
ezcats said:
i know!!!!!
all he does...."alright lets just open up quadrant here and see what we get...2 mins later....alright thats the rom..it only got 2000..screw that..."
lol!
Click to expand...
Click to collapse
Lol glad that im not alone
Mine on ICS for the first time its benchmark is nearly 4000 too, my expression was like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
well never mind, i can return to human form at anytime so benchmark is not really a big deal, just for showing off, i thought
what is actually your best score? i have about 4000 with cm9 from pershoot and 1.7.4 aacount-kernel.
Ran this on my tab with AOKP 4.1.2 and A1 Kernell 1.8.2 running at 1.6Ghz and only got 3435
My Tab is currently running Fourth Bar Revolution ICS 4.0.4 ROM with default ROM settings and Yoda Kernel 2.4.
Quadrant @ 1.2GHz (Interactive) = 2915
Quadrant @ 1.4GHz (Interactive) = 3317
Quadrant @ 1.6GHz (Interactive) = 3558
AnTuTu @ 1.2GHz (Interactive) = 6060
AnTuTu @ 1.4GHz (Interactive) = 6793
AnTuTu @ 1.6GHz (Interactive) = 7409
Share your benchmark scores with xda - Antutu / GFXBench / Vellamo Metal / Basemark OS II
Stock Rom or not will be greatly appreciated. See attached vs. other current Verizon Android Phones.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This was stock ROM, reflashed via TOT about a month after I had the phone. Rooted, all LG/Verizon disableable stuff disabled in App Manager (before rooting).
Ok so I just got done setting up Vanir AOSP 4.4.4 ROM with all my apps. I haven't customized anything other than various appearance settings - I didn't mess with SetCPU, schedulers, DPI, etc. This was just me installing all my apps and setting up the notifications etc. the way I like them. This is my first run at an AOSP ROM on the G3. Here are the results.
(NOTE: I downloaded and ran all the same benchmarks as in the list above, with a reboot between each benchmark run. I have annotated the order in which I ran the benchmarks after their respective titles.)
Antutu (first):
Vellamo Metal (fourth):
Basemark OS II (second):
GFX Bench (third):
(NOTE: The phone was scorching hot at the end of this run; throttling might explain the lower scores?)
My phone with bloat turned off and running with the interactive governor and a hack to make throttling less aggressive.
Sent from my VS985 4G using Tapatalk
tech_head said:
My phone with bloat turned off and running with the interactive governor and a hack to make throttling less aggressive.
Sent from my VS985 4G using Tapatalk
Click to expand...
Click to collapse
Dawn what is this hack you speak of?
Modifying thermal-engine-8974.conf to prevent throttling in an aggressive manner. There is a thread somewhere about it. I hacked it up self based on what I want my phone to do. As you can see from my previous post Antutu performance is right up there with the other flagships. The big reason why it still lags behind the S5 is 3d performance. Anyway I'm happy now that it doesn't throttle and I still get a days use.
Sent from my VS985 4G using Tapatalk
tech_head said:
Modifying thermal-engine-8974.conf to prevent throttling in an aggressive manner. There is a thread somewhere about it. I hacked it up self based on what I want my phone to do. As you can see from my previous post Antutu performance is right up there with the other flagships. The big reason why it still lags behind the S5 is 3d performance. Anyway I'm happy now that it doesn't throttle and I still get a days use.
Sent from my VS985 4G using Tapatalk
Click to expand...
Click to collapse
How'd you change governors if you are on the stock kernel?
Nothing in the stock kernel prevents it. I use ROM Toolbox (pro version) and you can tweak a bunch of performance parameters. LG doesn't lock the kernel down except for maximum clock speed. So you can't over clock but you can run a max 100% of the time. You will eventually hit thermal throttle, but you can do it.
Sent from my VS985 4G using Tapatalk
Here's my score with beans Rom and running skydragons kernel and no other tweaks to the kernel
sent from my stumped and bumped g3
Mine
pitbull8265 said:
View attachment 3054061
View attachment 3054062
Click to expand...
Click to collapse
Thank you, what is your current Rom / setup for these scores.
sent from my xda enhanced Android Device
[/ATTACH]
legend221 said:
Thank you, what is your current Rom / setup for these scores.
sent from my xda enhanced Android Device
Click to expand...
Click to collapse
View attachment 3054085
I did a lot of work tweaking the kernel, i/o scheduler and throttling response
Here is one using the latest Vanir Commotio Lollipop
pitbull8265 said:
[/ATTACH]
View attachment 3054085
I did a lot of work tweaking the kernel, i/o scheduler and throttling response
Click to expand...
Click to collapse
Do you mind posting details about how you have things setup?
jal3223 said:
Do you mind posting details about how you have things setup?
Click to expand...
Click to collapse
WOuld, but I am on a different setup now...
I set the governor to Interactive, read ahead buffer to 4096, cfq scheduler, Vegas Tcp Conjestion Control, max frequency 2457 minimum 300
I fine tuned the governor as well, but cant remember the settings, sorry
I am on Jasmine 4.0 running the latest Skydragon kernel. The trickster mod setup is the second pic- TCP setting is clipped off the top, its Westwood.
Broke 42k today with CM12 12/12.
In case anyone is wondering, using trickster mod the best governor is performance, not interactive, when it come to benchmarks specifically. Interactive is better for general use but performance will just always give you the optimal performance (get it) in a benchmark.
i did a benchmark with stock lil debloat and skydragon kernel , im no tech so i dont know much about these readings . im planing of switching to liquidsmooth rom
cap1tal1sm said:
Broke 42k today with CM12 12/12.
In case anyone is wondering, using trickster mod the best governor is performance, not interactive, when it come to benchmarks specifically. Interactive is better for general use but performance will just always give you the optimal performance (get it) in a benchmark.
Click to expand...
Click to collapse
Cool.. Screenshots for reference???
pitbull8265 said:
Cool.. Screenshots for reference???
Click to expand...
Click to collapse
You're just gonna have to trust me that I hit 42k xD didn't screenshot it.
I actually hit 40k with stock ROM by turning on performance governor, so it definitely helps with benchmarking.