We all own one of the most powerful smartphone to date. With great custom Rom's and kernels available, we get some of the highest benchmarks.
So now it's time to show them off!!
Post your:
- Quadrant
- CF-Bench
- AnTuTu
scores here.
Briefly describe the Rom/kernel you're using along with Ext4 (w/ or w/o journaling)/Ext3/CM7 partitions as well as mentioning if it is stock or OC'ed frequency.
Even if you don't have the highest benchmarks, feel free to share them! CM7 gets higher benchmarks than other Rom's anyway.
Highest Benchmarks will be posted on #2 for both OC and stock clocks. So it's a bit like a competition.
Bare in mind these three things:
Please post screenshots! Don't give numbers or your score will NOT be shown on #1/2!
Please upload in either qHD or resize to 640x480. Anything LESS will not be shown on #1/2!
Even if your score doesn't beat the ones on #1/2, FEEL FREE TO UPLOAD THEM ANYWAY!! In general, CM7 gets higher scores anyway, so DON'T be put off!
Good luck!
Highest Results for OC'ed
Quadrant:
by "elbscorp"
ATT 236.45.141 Deodexed
Faux123's 1.45hz kernel
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CF-Bench:
by "95rr900"
NottachTrix 1.2.9b
Kholk's 1.5Ghz OC kernel
AnTuTu:
by "totti123456"
Clemsyn's Elite Combo ROM 7.2
Clemsyn's 1.6Ghz Elite kernel
Highest Results for Stock Clocks
Quadrant:
By 'euplio'
Neutrino based EE ROM
Stock CM7 (EE) Kernel
CF-Bench:
By 'Notorious544d'
Aura 1.2.2.1
Ext4 w/o journaling and w/ Extents
Faux's 0.2.1 Enhanced Kernel
AnTuTu
By 'MrCoolBear'
CM7 Ba2tf
Faux123 0.2.3 Enhanced Kernel
This sounds interesting enough, I'm in! Although I never seem to get as high of scores as most of the ones I see, even though I try to follow all the advice I find...
Alien#4 (with theme)
EXT4 (I think its with journaling, whichever is stabler but lower performance)
OC @ 1.3
AnTuTu: 5364
CF-Bench: 6087
Quadrant: 3346
I don't know if these are accurate, though. For some reason the Java scores in CF-bench were WAY too low (like, below stock Atrix levels), and I don't know if the other benchmarks take that into account.
CM7 beta with 0.2.0 kernel from faux overclocked to 1.3GHz
Quadrant: 3962
AnTuTu: 5981
CF-Bench: 5940
Smartbench 2011: Productivity 4345 Gaming 2828
DarkSide 2.0 with faux123 0.2.0 at 1.3gz.
Impressive results from a lot of people, however, can you please upload screenshots? It'll look better and cleaner on #1/#2.
Thanks.
useing alien v4 faux v2.0 0c 1.3
running alien v4 @1.2 faux 1.3 oc kernal Sent from my MB860 using xda premium
ltdanno360 said:
running alien v4 @1.2 faux 1.3 oc kernal Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Nice score, but Nottach's score is BEASTLY! Btw, why are java scores so low sometimes?
Here my scores:
Quadrant: 4334
Smartbench: 4232 CPU, 2972 GPU.
CM7 , [email protected] 1.3 ...
Quadrant : 4910 \m/
AnTuTu : 6100 i think...
think i haven't any screenshots :| atrix rocks \m/
PAR3A said:
CM7 , [email protected] 1.3 ...
Quadrant : 4910 \m/
AnTuTu : 6100 i think...
think i haven't any screenshots :| atrix rocks \m/
Click to expand...
Click to collapse
Use 'screen grabber' to take screenshots. Hold down search key to activate.
Running CM7 + Faux123's 2.0 kernel :3
CM7, 1.3GHz OC, stock voltage
Sent from my MB860 using XDA App
neer2005 said:
CM7, 1.3GHz OC, stock voltage
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
i cant believe neer is still alive!
The BadAzz Aura 1212...
Sorry for the late update. Have updated #1 accordingly with new records.
Holy cheese those are some cracking benchmarks!!!
We need more people with stock clocks in here lol.
If anybody posts, despite how low their score might be, they'll be on #2
i just realizee i was running pandora in the background also
alienv4 custom webtop+xfdesktop-xfce4-panel +java pluging in firefox
fauxsv2.0 1.3 oc
CM7 - FAUX [email protected]
Related
Hi, guys.
I thought of making a thread where we can post bechmark screenshots on our P500. Just for the sake of comparison, so other people can try to get what we've got.
Let's do like this:
First, post your P500 informations like ROM, OC (overclock) yes - how much / no, KERNEL, A2SD/D2SD (apps2sd/data2sd) script yes - which one / no, franciscofranco's tweaks yes / no, modified libsqlite yes - which one/ no.
If you have another item to add to the list, feel free to add it.
And then post your benchmark screenshots like on Neocore, Quadrant and RL SQL.
My current configuration:
ROM - CM7 6.4.1 by mik_os
OC - yes, 245mhz~748mhz interactive
KERNEL - the one from CM7, didn't change it
A2SD/D2SD - ungaze's DATA2EXT
franciscofranco's tweaks - yes
Modified libsqlite - yes, ungaze's
Screenshots:
Quadrant (more is better):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Neocore (more is better):
RL SQL (lower is better):
Anyone?
Come on, guys, let's exchange some knowledge here.
lol 1.4.2 rom
dookmatt kernel
o/c 245/729
antutu benchmark 1128
AND
lol1.4.2 rom
kernel 2.2.2 oc+lagfix
o/c 245/729
antutu benchmark 1015
ok here i just attached the picture file hey what ROM and kernal are you running to make your phone so fast?????
dislplin01 said:
ok here i just attached the picture file hey what ROM and kernal are you running to make your phone so fast?????
Click to expand...
Click to collapse
these are the file you need to get such score just make sure it is working with the rom you choose http://forum.xda-developers.com/showpost.php?p=12959016&postcount=2 as some users are getting prob using a2sd and as far as rom is concerned this is the 1 http://forum.xda-developers.com/showthread.php?t=946354
The Graphics Coprocessor in the Optimus line is awesome for certain, but it makes comparisson to non GPU phone hard.
Dislplin01, posted the Linpack test (free in Android market), that measures MFLOPS and is more balanced comparison between all phones by all vendors.
BTW freaking awesome numbers, rapharias!
shhbz said:
these are the file you need to get such score just make sure it is working with the rom you choose http://forum.xda-developers.com/showpost.php?p=12959016&postcount=2 as some users are getting prob using a2sd and as far as rom is concerned this is the 1 http://forum.xda-developers.com/showthread.php?t=946354[/QUOTE
ok cool but i am still not getting the scores that he is getting???
???
Click to expand...
Click to collapse
So i did all of them i didnt do it order though and have done a back up simnce because when i flashed the UNGAZE DATA TO SD AND DALVIK CACHE TO RAM it wiped all my data ???? was it suposed to do that??? is it because i didnt do it order ??? i dont understand why it did that maybe my sd card ???? if you could let me know thanks
Hey, guys. Nice to see other people's numbers.
Actually, Quadrant's score is just for comparison, it doesn't change anything in performance or game playing if it is high. Linpack is a good way to see how is your phone.
Sometimes Neocore gives me 61fps.
As for my Linpack score, it's the same as dislplin01's.
If you want to know what ROM, kernel etc. I am using, just read my first post.
You can find ALL of it here in XDA forums! Just take a look on p500 developers area.
I'm thinking of changing to mik_os' CM7 6.4.2 or void.franco soon. I'll post more benchmarks later if I change anything.
I still dont understand why you cant explain such high quantrant scores as well as neocore i have done all that you guys say i should and still only 12oo in quandrant and 59.0 in neocore ????????
Actually I told everything I'm using right now on my P500. Anyway, if you want to try it, here are the posts in which you can download all the mods:
CM7 6.4.2 mik_os http://forum.xda-developers.com/showthread.php?t=946354
Tweaks franciscofranco http://forum.xda-developers.com/showthread.php?t=999064
Data2SD ungaze http://forum.xda-developers.com/showthread.php?t=1042828
Patched Libsqlite ungaze http://forum.xda-developers.com/showthread.php?t=1000899
I'm also running an overclock of 245mhz min / 748mhz max - interactive (you can set it by using SetCPU or on CM7's configuration tools).
I am thinking of changing CM7 for the new 6.4.2 version (I have 6.4.1) or franciscofranco's 2.2 rom. I'll post later if I do.
I used void but quadrant only got 527, with overclocked 787mhz
Sent from my LG-P500
Yeah, Gingerbread, for some reason, gets a higher Quadrant score. I don't know why.
But anyway, even with so great benchmark scores, games like Zenonia get low fps sometimes. Tested it myself.
Nice I'm scoring 2200 in quadrant and 58-60 in neocore after instal of these tweeks I'm happy
Sent from my LG-P500 using XDA Premium App running CM7 over clocked at 806
Don't you get kernel panics OCing it up to 806mhz? I'm on 748 max and correcting myself, Zenonia doesn't lag anymore.
Sent from my LG-P500 using XDA App
No but the this is like 4th optimus t and the first one over clocked to 806 but the second 2 would only go to 787 but this one will go to 806
Sent from my LG-P500 using XDA Premium App running CM7 over clocked at 806
Everything on mine one is still stock one, suitable for reference.
Quadrant:
436 [When i'm using 2.2.2]
468 [When i'm using 2.2.1]
Neocore:
24.6 FPS
ROM Void (2.2), Francos´s Kernel V10 , OC 729, Quadrant : 679 without stagefright player. Neocore 50.2.
I don't see how people get such good quantrant scores. I was getting low scores before when I was on Optimus x rom. ( 532 ) but I've moved to megatron rom now, I'm getting scores ( 985 ) which is better but I'm still getting under 1000.
Neocore scores is only 48 fps
Well I.know megaton is a great rom I used to get 1200 quadrant score on it are you over clocking?? C cause thats important also we are using ungazes data2sd and ungazes libsquit.so and that is what is giving us scores of 2100 sometimes even more mainly it's ungazes data 2sd it's great and gives you unlimited room for your apps but it does have some bugs
Sent from my LG-P500 using XDA Premium App running CM7, ungaze data2sd, over clocked at 787 quadrant score 2100
Using this kernel is at your own risk. Before flashing make backups!!!
=========================WHY===============================
dalingrin is now working hard at CM7 kernel, and seems nobody has post the 1.2 overclock kernel, I'v recompiled the 2.6.32.9 kernel with a few of dalingrin's patches(modified from dalingrin's git).
so for the one who wants to taste some fresh meat, here it comes~~
=========================WHAT==============================
http://sugwacee.dyndns.org/index.php/16.html?p=/20110505
there are four versions:
1.1GHz
1.2GHz
stock 800M
BFS test version[/URL](1.1GHz)--for test only, cos it is set to very low voltages just for my NC. use it at your own risk.
1.1g version is recommended, and if your NC is a tuff one, try 1.2g
changes differ from stock 1.2 kernel(2.6.32.9):
1. freq table changed, boot 900M, and has a 1.2G/1.1G option. you can active it by using SETCPU. now let's go to youtube...
2. volume tweaks.
3. cifs and utf8 supported.
4.freq transition latency tweaks.
5. volt down.
6. ram speed tweaks, i don't know if it works or not(stock1.1->1.2 has change ram freq from 166M to 200M, and i am using a kernel which configured it as 220M, and if stable, i will post it) -- in BFS VERSION
7. BFS sched. currently i have BFS as the proc sched, all crazy(with quadrant 3D/2D improved slightly~1 fps up at DNA test, and excellent touch experience). but wifi has gone(kmod version issue maybe)[/COLOR] -- fixed, thanks to verygreen.
==========================HOW==============================
And of course, use CWM to flash the new kernel, just enjoy them. first boot after flashing will display an "update failed notice", turn off and then on to ignore this.
Just feel free to post feedbacks, and you can post your file:/sys/power/sr_vsel
special thanks to:
Dalingrin, for his great patches and works for NC/CM.
Verygreen, for the wlan_drv and too all the CM related works.
=======================[2011-05-13 EDIT]=============
Add BFS version.
because BFS version use a new tiwlan_drv.ko, if you change back to another kernel, do remember use NC_stock_1.2_restore_wlan_drv.zip to restore stock tiwlan_drv.ko.
===========current feedbacks============
1.1g seems to be stable for most of people. but I still doubt of it:
quadrant sometimes stop at running H.264 benchmark, I do think it has something to do with the DSP freq/volt, i have recompiled a new version to confirm this. release ASAP.
thanks,,,, will give it a try,,, 1.1 g gives me a quadrant score of 1581.... the stock 800m gave me 1261,,,, big difference in how the nook feels and responds , good work...
Edit: just ran 3 more times and got 1700+ every time !
Nice work.
1.1 is working great on my Nook.
Working perfectly for me so far. Thank you!
(1.1)
Sent from my NOOKcolor using XDA Premium App
mutant13 said:
thanks,,,, will give it a try,,, 1.1 g gives me a quadrant score of 1581.... the stock 800m gave me 1261,,,, big difference in how the nook feels and responds , good work...
Click to expand...
Click to collapse
i'v got 1900+
sugwacee said:
i'v got 1900+
Click to expand...
Click to collapse
was that with 1.1g ? or 1.2g?
1.16GHz.
my NC will crash at 1.2G(if no volt tuned up, same as the Dalingrin' Eclair OC kernel. i prefer batterylife first,so i locked it at 1.16G, with stock volt level), fine enough, youku(sth. in China like youtube ) acts perfect.
here is the pic i post to another bbs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so far so good. no bluetooth i guess? pardon my noobiness.
Excellent! Been waiting for this OC kernel. Tested 1.2Ghz (unstable) and 1.1ghz(stable) on dual boot partition running BN 1.2... it would be great to see interactive governance profile enabled and a working BT inject! It is noticeable speedier with the OC kernel.. might be replacing my Nookie Froyo with this setup.
What's the purpose for the 800M zip? To get the new features?
Any issues with wifi?
fpga_guy said:
What's the purpose for the 800M zip? To get the new features?
Any issues with wifi?
Click to expand...
Click to collapse
if you have a problem and need to return to stock....wifi still works great 1.1g is perfect, 1.2g made me crash.... hope that helps
Great work, have been waiting for this since I rooted 1.2 and all I need now is a little speed boost. Keep it up.
Nice work! Using the 1.1GHz kernel and my NC went from 1300+ Quadrant scores to 1800+. So far I've seen no issues!
fpga_guy said:
What's the purpose for the 800M zip? To get the new features?
Any issues with wifi?
Click to expand...
Click to collapse
incase that someone's NC is unstable with both 1.1g and 1.2g, for restoring
how's the battery life?
My stock rooted 800M is pretty decent: 6+ days with 1 hour of usage each day.
Undervolting with 1.1g in the best case could be a wash in terms of battery life?
Mine is unstable at 1.2G but 1.1G works great. Thank you very much. Now only if I can get rid of this youtube not working on my rooted Nook 1.2
fpga_guy said:
My stock rooted 800M is pretty decent: 6+ days with 1 hour of usage each day.
Undervolting with 1.1g in the best case could be a wash in terms of battery life?
Click to expand...
Click to collapse
not very sure. you can check the battery life.
a few days later, i will do some clean up and release a new version(which is much stabler,with most of stuffs i mentioned), that one would to be the same as stock one(i mean battery life performance)
bugs with youtube?
I noticed that the only two members having problems with youtube have also overclocked the NC: ehcan and HTCF4N.
Coincidence? I am at BN1.2 with MN4.5.2 and have not OC. Youtube works fine.
I have 1.1 OC. Youtube is perfect.
Sent from my SAMSUNG-SGH-I897 using XDA App
fpga_guy said:
I noticed that the only two members having problems with youtube have also overclocked the NC: ehcan and HTCF4N.
Coincidence? I am at BN1.2 with MN4.5.2 and have not OC. Youtube works fine.
Click to expand...
Click to collapse
maybe sth. to do with dsp volt, i guess, same as the H.264 issue i mentioned at first post.
fix it later.
curiously, i remember the h.264 issue apear with stock kernel, so maybe sth. wrong with system itself.
So I hate benchmarks but I got bored so I ran a quadrant on my tab...I got 4221...is that a mistake?
wow. seems great to me. I was getting about 2500. I switch my governor to performance and it jumped up to over 3500 though. I've got ally of apps though so I figure not bad for me either. What's you governor set at getting over 4000?
If you see this it was sent using my GT-P7510.
Well guyz You should try a new rom to get High Scores on your quardrent tests
Well Here is a few roms that i used to get high quardrent scores
Paris rom http://forum.xda-developers.com/showthread.php?t=1284355 - Personally I love this rom because it overclockes my Tab and give me 3000++ scores
Starbust Rom http://forum.xda-developers.com/showthread.php?t=1197776 -This one also overclockes your processor to 1.4Ghz and improves I/O and other graphic values
I think This post would helpful for you If so Please Click on Thanks Button
KaFrEEkAbOom said:
Well guyz You should try a new rom to get High Scores on your quardrent tests
Well Here is a few roms that i used to get high quardrent scores
Paris rom http://forum.xda-developers.com/showthread.php?t=1284355 - Personally I love this rom because it overclockes my Tab and give me 3000++ scores
Starbust Rom http://forum.xda-developers.com/showthread.php?t=1197776 -This one also overclockes your processor to 1.4Ghz and improves I/O and other graphic values
I think This post would helpful for you If so Please Click on Thanks Button
Click to expand...
Click to collapse
ok...not to be mean...don't tell me what is helpful or not...
btw: i dont CARE about benchmark scores...AT ALL!!!!!
i just wondered why it was so high since engadget and other review sites say its like 1000.
@benzoman - just stock settings on cm9 preview (rootzwiki)
Running Task 14 overclocked to 1400 here. Couldn't get me to change ROMs for almost anything. Unless it was to an updated Task ROM. I'm running some of pershoots kernel stuff too.
Don't really care about benchmarks myself either. Just thought I'd run the quadrant to see what I got compared to what you got.
As long as it's stable and doesn't lag that's all I care.
Task has always taken VERY good care of me in all aspects of what I want, and need. So that's why I'm so partial to his stuff and suggestions of what to run with his ROMs.
Thanks mate for something to do at least for a few minutes.
EDIT: Just noticed both suggested ROMs are old Task ROMs too. LMAO
Yeah I'm running to change to an older ROM so my scores go up. NOT. :what:
If you see this it was sent using my GT-P7510.
tried many different roms and quadrant scores were different. never felt any difference on daily use of my tab though. Let's face it, we all are affected by that guy on that galaxytabhacks site
davsarus said:
tried many different roms and quadrant scores were different. never felt any difference on daily use of my tab though. Let's face it, we all are affected by that guy on that galaxytabhacks site
Click to expand...
Click to collapse
i know!!!!!
all he does...."alright lets just open up quadrant here and see what we get...2 mins later....alright thats the rom..it only got 2000..screw that..."
lol!
ezcats said:
i know!!!!!
all he does...."alright lets just open up quadrant here and see what we get...2 mins later....alright thats the rom..it only got 2000..screw that..."
lol!
Click to expand...
Click to collapse
Lol glad that im not alone
Mine on ICS for the first time its benchmark is nearly 4000 too, my expression was like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
well never mind, i can return to human form at anytime so benchmark is not really a big deal, just for showing off, i thought
what is actually your best score? i have about 4000 with cm9 from pershoot and 1.7.4 aacount-kernel.
Ran this on my tab with AOKP 4.1.2 and A1 Kernell 1.8.2 running at 1.6Ghz and only got 3435
My Tab is currently running Fourth Bar Revolution ICS 4.0.4 ROM with default ROM settings and Yoda Kernel 2.4.
Quadrant @ 1.2GHz (Interactive) = 2915
Quadrant @ 1.4GHz (Interactive) = 3317
Quadrant @ 1.6GHz (Interactive) = 3558
AnTuTu @ 1.2GHz (Interactive) = 6060
AnTuTu @ 1.4GHz (Interactive) = 6793
AnTuTu @ 1.6GHz (Interactive) = 7409
Just a fun and informative way to see everyone's benchmarks. Also see how each rom or kernel is performing. Please let us know what benchmark app you are using along with the rom and kernel. :thumbup:
Sent from my SAMSUNG-SGH-I717 using xda premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Padawan JB v2 rom oc @ 1512Mhz smartassv2 gov / sio scheduler
8132 score - CM 9.1 - 1.8ghz - Performance & sio - flapp's latest.
However, I usually run at 1134 and would take the pepsi challenge with any overclocked JB rom as far as responsiveness, speed, and battery life.
I need to try and lower my clock speed and see if it helps any. My scores are messed up due to lack of speed in sd-card reading/writing. Very low. In the 100-200 range for both
sent from my sending thing
There was a thread for this a while back .... But I had the highest I'm pretty sure with quadrant ..... I hit a 4111
£|@$h•h°|i©
shayneflashindaily said:
There was a thread for this a while back .... But I had the highest I'm pretty sure with quadrant ..... I hit a 4111
£|@$h•h°|i©
Click to expand...
Click to collapse
I haven't tried quadrant. I stay around 8 grand with AntuTu
...sent from my sending thing
androidmechanic said:
I haven't tried quadrant. I stay around 8 grand with AntuTu
...sent from my sending thing
Click to expand...
Click to collapse
uber kernel which i just released with revolt i was hitting 9500+ @ 1.89ghz, performance gov, bfq i/o, gpu oc'd *that was with a class2 sdcard loaded*
JamieD81 said:
uber kernel which i just released with revolt i was hitting 9500+ @ 1.89ghz, performance gov, bfq i/o, gpu oc'd *that was with a class2 sdcard loaded*
Click to expand...
Click to collapse
Wow!! You just keep pumpin em out, eh? You slid that one out without me even knowing. Last build of yours I was on was SuperNexus and I absolutely loved the stable, smooth, and quite speedy vanilla experience. I was in 8500's on AntuTu with SN
...sent from my sending thing
Herw is mine, blackjelly rom. Quadrant was 2985
Sent from my SAMSUNG-SGH-I717 using xda premium
I ran saurom back in the day over clocked like crazy but set up right ... I was running very light barely any apps ..kept the Bare minimum... 4111...highest jb ROM quadrant I think I hit high 3000s...but its hit or miss with quadrant ... And not only that our phone can only do so much
...as long as it functions smooth and seemless I have no worries.
£|@$h•h°|i©
shayneflashindaily said:
I ran saurom back in the day over clocked like crazy but set up right ... I was running very light barely any apps ..kept the Bare minimum... 4111...highest jb ROM quadrant I think I hit high 3000s...but its hit or miss with quadrant ... And not only that our phone can only do so much
...as long as it functions smooth and seemless I have no worries.
£|@$h•h°|i©
Click to expand...
Click to collapse
I agree. Waiting for the Note 3 to come in sept./oct this year. Ill be due for my upgrade. Looks like we getting the snapdragon 800
...sent from my sending thing
7503 with antutu
3297 with quadrant
Stock 4.1.2 rom rooted
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Here is mine oc at 1780
...sent from my sending thing
Whatever Flo
What is it: Stock android kernel, JSS15J, absolutely no changes besides the overclock. No fancy features, no snake oil, no bloat, clean stock experience.
Overclock not customisable, baked right into the kernel and loaded on boot, no CPU/GPU management apps needed.
I take no responsibility or imply any warranty for the use of this kernel, use of this kernel is completely at your own risk.
If a build doesn't work for you try the lower clocked version, still not then you're out of luck and your CPU can't handle the overclock sorry. If there is enough demand I can build a lower clocked edition but I don't really see the need. Any problems or questions I will try to answer for you.
Proof is in the Source
Flash zips with TWRP/recovery of your choice
1890MHz Build + GPU OC: http://d-h.st/y0W
Vellamo metal score: ~830
GFXBench:
T-Rex 18fps
1009 Frames
Egypt 46fps
5068* Frames
1890MHz Build No GPU OC: http://d-h.st/9yr
Vellamo metal score: ~830
GFXBench:
T-Rex 16fps
889 Frames
Egypt 41fps
4653* Frames
1728MHz Build + GPU OC: http://d-h.st/95k
Vellamo metal score: ~800
1728MHz Build No GPU OC: http://d-h.st/hmZ
Vellamo metal score: ~800
* Sections of demo limited by VSync
If you like, give me a thumbs up!
Thanks and enjoy your nexus.
Change Log
Code:
Aug 4 2013:
- Added GPU OC option
Aug 3 2013:
- Added CPU Overclock builds
Very nice. Do you intend to add GPU OC as well? I think with this kernal with GPU OC it would play nicer with Clean ROM than the current Kernels. Just my opinion but Jassy kernel doesn't seem to like CR as much as Cm 10.2 so I would really like to see what stock with extra OC's does for that very nice Rom .
conan1600 said:
Very nice. Do you intend to add GPU OC as well? I think with this kernal with GPU OC it would play nicer with Clean ROM than the current Kernels. Just my opinion but Jassy kernel doesn't seem to like CR as much as Cm 10.2 so I would really like to see what stock with extra OC's does for that very nice Rom .
Click to expand...
Click to collapse
Yes I am planing on it, doing some stability and performance tests right now. Will release it when I finish that.
WhiteDawn said:
Yes I am planing on it, doing some stability and performance tests right now. Will release it when I finish that.
Click to expand...
Click to collapse
You are awesome. This is what I've always wanted in a kernel.
CPU, GPU OC and voltage control.
Thanks!
New builds up, now include GPU overclock.
Great kernel, no issues on stock ROM whatsoever. Seems like GPU scores went down a tad though, with no oc and oc versions of the 1.7ghz, looks like it went down 1k pts on 3d score in antutu.
Maybe add a little higher oc on the GPU to test out with the 1.7ghz version?
Could you confirm with me, I have the 1.7+GPU oc version and my 3d graphics score seems to be lower, I was around 7k for stock clocks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks!
Sent from my Nexus 7 using Tapatalk 4
Philaphlous said:
Great kernel, no issues on stock ROM whatsoever. Seems like GPU scores went down a tad though, with no oc and oc versions of the 1.7ghz, looks like it went down 1k pts on 3d score in antutu.
Maybe add a little higher oc on the GPU to test out with the 1.7ghz version?
Could you confirm with me, I have the 1.7+GPU oc version and my 3d graphics score seems to be lower, I was around 7k for stock clocks.
Thanks!
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Thanks for the heads up, I haven't tried using antutu for my benchmarking and I ran most of my testing on the 1.8 build since I just assumed dropping the clocks down wouldn't make much of a difference. I'll look into it.
Any Chance of a JSS15Q Version?
Felnarion said:
You are awesome. This is what I've always wanted in a kernel.
CPU, GPU OC and voltage control.
Thanks!
Click to expand...
Click to collapse
Yeah that would be peachy if JSS15Q based. I was on jassy's earlier (with JSS15J) and the GPU boost was noticeable, but back on stock to fix the multitouch.
hey .
i tested the 1,7ghz+450mhz gpu kernel and its running fine .
But it would be so cool if u could make one more kernel with just GPU overclock because i think the CPU power of the n7 is fine with 1.5ghz .
but the 50mhz more in GPU frequency will be more noticable .
i hope its not to much work for you... otherwise i will be fine with running the 1,7ghz edition.
thanks
I really liked this kernel, but when I flashed it after the latest cm 10-18 nightly, it caused a corrupt display upon booting. Fortunately I had made a nandroid backup a few weeks earlier so I was able to get it working again after restoring the system partition. I'm afraid to try flashing this again..