I have a problem with one of my Lenovo A830 phones.
I bought it from Etotalk, so it came rooted, and with their custom version of the Lenovo Stock ROM and their custom version of CWM 5.5 installed.
I tried formatting my SD card and then doing a factory data reset from within the operating system. (I was intending to install MIUI V5 after rebooting into recovery).
However, on rebooting, the device is now caught in an infinite boot loop, and I am not able to boot into recovery mode (by holding down power and both volume keys). It loads the initial splash screen, then shows a few seconds of the Android character and some whirring cogs before rebooting.
I am able to boot into Factory mode (power and volume up) or Meta mode (power and volume down). Factory mode has a number of options, but they are all in Chinese characters, which I am unfortunately not able to read.
I did notice that my SD card seemed to be write protected when I tried to format it in my computer and to copy on the new ROM - I solved this by putting it in a different phone and reformatting it. I wonder whether the factory reset process has write protected something it shouldn't have?
Does anyone know how I might best proceed? I've been digging around on the forums, and tried a few things, but there's nothing which seems to provide a coherent solution for this problem.
I've got the latest Android SDK Tools, MTK Droid Tools 2.4.8, SP Flash Tool 3.1312, some additional ADB drivers (120827 v3.7) that I'm not sure how to install, the latest MIUI V5 ROM (3.8.16), and the latest stock Lenovo ROM (S118 from Need A ROM, just in case I need it).
Maybe different SP Flash Tools version?
I had trouble using SP Flash Tools v3.1312 with A830. Once I switched to v3.1304.0.119 I was able to flash both the original ROM and the custom MIUI one without serious issues. I'm unable to post the download link but google it.
One other thing is that when connecting the phone, it usually loads the something something Preloader driver, which is no good (even if it gives you Download OK). When attempting to flash either ROM, try pressing both the power and volume up buttons while connecting the phone (after pressing Download), only way it worked for me.
Good luck!
I managed to sort this out quite simply in the end!
On the Lenovo A830 (and presumably other Lenovo Android phones?), you enter recovery by pressing power and then pressing volume up / down together after a short pause. The short 1 - 2 second pause is important, because if you try and press them at the same time or in quick succession it doesn't seem to work.
I then installed MIUI V5 from the SD card followed by Google Apps after a reboot. In order to get MIUI to install, I had to remove the assert check at the top of the update script, because this seems to erroneously check for the A820 (even though there isn't currently a port for this device?). It's working excellently with two exceptions - I am unable to select the SD card as a storage device, and Google Play store is not searchable (it causes a Force Close).
tominglis said:
I managed to sort this out quite simply in the end!
On the Lenovo A830 (and presumably other Lenovo Android phones?), you enter recovery by pressing power and then pressing volume up / down together after a short pause. The short 1 - 2 second pause is important, because if you try and press them at the same time or in quick succession it doesn't seem to work.
I then installed MIUI V5 from the SD card followed by Google Apps after a reboot. In order to get MIUI to install, I had to remove the assert check at the top of the update script, because this seems to erroneously check for the A820 (even though there isn't currently a port for this device?). It's working excellently with two exceptions - I am unable to select the SD card as a storage device, and Google Play store is not searchable (it causes a Force Close).
Click to expand...
Click to collapse
Hello,
How did you manage to fix the reboot loop?I have the same problem,after a factory reset the phone just reboot like you said in first post...please help me fix it...
claudiuionel said:
Hello,
How did you manage to fix the reboot loop?I have the same problem,after a factory reset the phone just reboot like you said in first post...please help me fix it...
Click to expand...
Click to collapse
Hi I had similar "reboot loop" problem this morning after a phone factory reset.
I have no idea how I solved that but the following was the steps I tried:
1. Install the MTK6589_PdaNET_ADB_VCOM_Drivers. Skip the USB connection during setup. Start the PdaNET after setup finished.
2. Insert battery inside the phone and connect the phone with the computer by USB
In my case, the phone reboot loop once, and the lenovo screen appeared in the second restart. The phone hanged. I unplugged the cable, took out the battery, insert the battery again and start the phone normally again and it is working now.
I recommend installing the recovery rom after you have fixed the phone.
Goodluck
Related
Hello! I am new here, so my apologies if posted in the wrong section of forum.
I need help with my Lenovo A816 (qualcomm based). I accidentally deleted lenovo launcher. In the morning i switched the phone and it keeps boolooping (at least i think)
I can't do factory reset also because it doesn't react to vol- + pwr button, it keeps turning itself on and off. It does that also without battery when connected to USB-PC.
Can somebody help me flash the correct ROM and gives me instructions step-by-step how to do it.
I kept searching everywhere and whatever tool i tried it seems like it's mission impossible.
I downloaded custom ROM from here. I wanted to flash the custom rom because all of the chinese junk inside (couldn't access google play or etc... with pre-installed).
P.S. If it helps i have another Lenovo A816 (exactly the same) which is ok, if that helps in anyway. PLEEAASE PEOPLE, HELP ME OUT. It's a brand new phone.
Yes, one other thing, i can enter Lenovo-Recovery by pressing vol+, vol- and pwr. I do format data and wipe user data, and reeboot but keeps bootlooping. So Lenovo recovery doesn't help either.
stomas30 said:
hello! I am new here, so my apologies if posted in the wrong section of forum.
I need help with my lenovo a816 (qualcomm based). I accidentally deleted lenovo launcher. In the morning i switched the phone and it keeps boolooping (at least i think)
i can't do factory reset also because it doesn't react to vol- + pwr button, it keeps turning itself on and off. It does that also without battery when connected to usb-pc.
can somebody help me flash the correct rom and gives me instructions step-by-step how to do it.
i kept searching everywhere and whatever tool i tried it seems like it's mission impossible.
I downloaded custom rom from here. I wanted to flash the custom rom because all of the chinese junk inside (couldn't access google play or etc... With pre-installed).
P.s. If it helps i have another lenovo a816 (exactly the same) which is ok, if that helps in anyway. Pleeaase people, help me out. It's a brand new phone.
Yes, one other thing, i can enter lenovo-recovery by pressing vol+, vol- and pwr. I do format data and wipe user data, and reeboot but keeps bootlooping. So lenovo recovery doesn't help either.
Click to expand...
Click to collapse
conditions :
Install qpst 2.7.460
phone must be in hs usb qdloader 9008
open qfil > tools > partition manager
in partitions manager select splash partitions
right click and load image
browse splash.img
once done exit partitions manager by select ok for reboot.
This will fix your bootloops and you can reflash global stock rom.
Hello, after playing with my z90 (with the original rom that was Z90a40_USR_S118 international, bought in october 2015) I wanted to clean it up and make some updates. So I made my backups etc... Entered the recovery (not the green lenovo one wich is very limited) with hold vol - , I choosed to wipe (the phone was encrypted just to mention) all that I can and reset to factory, all was done but when it finished, it reboot and it stuck to initializing just after lenovo logo it reboot... initializing... and it s an inifinite loop. So I retryed to go to the maintenance recovery but it s not possible a black screen come and it reboot, I can go to the limited lenovo green recovery, but no factory reset, so I make the wipe datas etc... nothing... infinite reboot loop!
So I found some rom put them in the micro SD, go for an update.zip with the recovery, update work well but... initializing.... reboot...
Grrr, lenovo... So I take the big tools, installed a minimal win7 with qualcom drivers, lenovo ones, qpst. I tried many manipulation to enter the download mode with port com (I finaly managed multiple times with not the exact manipulation it s vol- + power + 10s and multiple spanning of the vol - button....) And I have succefully flashed multiple roms with qfil but with always the same results... initializing, reboot... I don t know where to search now, I someone can help me to find where to go, perhaps reflashing the recovery or I saw the .qnc in a russian forum but I can t understand one word.... 2 days of flashing make me hate my lenovo, my first brick with a phone . Any help?
Thanks,
sorry for my bad english
Steph
costeph said:
Hello, after playing with my z90 (with the original rom that was Z90a40_USR_S118 international, bought in october 2015) I wanted to clean it up and make some updates. So I made my backups etc... Entered the recovery (not the green lenovo one wich is very limited) with hold vol - , I choosed to wipe (the phone was encrypted just to mention) all that I can and reset to factory, all was done but when it finished, it reboot and it stuck to initializing just after lenovo logo it reboot... initializing... and it s an inifinite loop. So I retryed to go to the maintenance recovery but it s not possible a black screen come and it reboot, I can go to the limited lenovo green recovery, but no factory reset, so I make the wipe datas etc... nothing... infinite reboot loop!
So I found some rom put them in the micro SD, go for an update.zip with the recovery, update work well but... initializing.... reboot...
Grrr, lenovo... So I take the big tools, installed a minimal win7 with qualcom drivers, lenovo ones, qpst. I tried many manipulation to enter the download mode with port com (I finaly managed multiple times with not the exact manipulation it s vol- + power + 10s and multiple spanning of the vol - button....) And I have succefully flashed multiple roms with qfil but with always the same results... initializing, reboot... I don t know where to search now, I someone can help me to find where to go, perhaps reflashing the recovery or I saw the .qnc in a russian forum but I can t understand one word.... 2 days of flashing make me hate my lenovo, my first brick with a phone . Any help?
Thanks,
sorry for my bad english
Steph
Click to expand...
Click to collapse
Hi,
here is my solution if can help.
I had on my vibe shot s208 rooted ROW. It stacked after SU update in boot loop.
1. I did wipe data without formatting from recovery mode (Vol+ and Vol- and Power button. When Logo is on release power button and hold Vol+ and Vol - until you are in recovery mode). STILL boot loop.
2. I did wipe data with formatting from the same menu. - STILL boot loop.
3. I did factory reset from recovery menu (Vol - and Power after logo is on release Power and hold Vol - until you get recovery mode) - STILL boot loop.
Then I did next:
1. I downloaded and installed QFIL (QPST_2.7.422) - I am not allowed to post links yet.
2. I have connected OTG adapter to phone. Phone was off.
3. then connected OTG to PC. It was some HDD activities but I did not hear any sound.
4. press Vol- for as long as something is going on - HDD activities. Then I think came up sound too - but not sure.
5. I had installed Qualcomm USB drivers from before I suppose.
6. Because I couldn't see my device as ...908 I disconnected and connected again usb cable... then I got my device as ...908 in device manager, but it was written "RECONNECTED" or similar in front of word "QUALCOM".
7. Then just follow instructions for QFIL. and ROM will be installed.
First I have installed INTERNATIONAL no root ROM. But because I needed phone to be rooted in order to use data recovery software I flashed again with s240 ROOTED. When I flashed second time I did not use OTG, just direct usb cable connection to PC, and my phone was again recognized after I reconnected usb cable and in device manger was "RECONNECTED" in front of word "QUALCOM".
Hello, thanks for replying. But I already tried all the roms with qfil, they were successfully installed as wtih miflash but I always got a initializing boot loop... Unfortunately I tried some other method, I successfully erase all partitions, I m now in 9006 mode with a long vibration on start and I cant do anything now No flashing works anymore... I ll try some stuff when I had a little time.
did you find a solution ?? , cause I have the same problem ... tried everything, adb or cwm recovery won't work cause my device is not rooted nor the usb debugging is on .. so am stuck with this "initializing loop".. flashing didn't solve it for me, I tried every ROM I could find, rooted or not .. nothing .... this problem happened with my phone after wiping user data and trying to restore QCN, cause before this problem I had another one with network services, tried to solve it, and here I am, from bad to worse
Hello,
I had the same problem. I tried with QFile and MiFlash but unfortunately without success. will you a track ?
I reinstalled the drivers QDLoader HS- USB Driver. I maintained volume + for 3 seconds , however, nothing happens ! (Before it worked ) I also tried adb reboot eld the prolème is the USBport phone is not known !
I followed the procedure of DejXDA carefully until the end staying press the VOL- the phone starts to recharging battery ... have you others sollutions ? thanks in advance.
Hey there !
Same problem for me... The solution may be to rebuild the partition table, but we need a working phone, and a backup with QPST.
Would anyone post a *.qcn file from his phone, made with QPST Software Download ? or a *.hex ?
And the user partitions ? Or a factory image (*.mbn) ?
Any gurus here, what would you advise for that problem ? Would using QPST properly work ?
Cheers !
Z90-7 (Z90a40) unbricked (at last...)
Hello!
After days and days of fails, my Z90-7 is unbricked!
How?
Just follow the OTG cable method, but copy in the SD card, in the sdfuse folder, this image:
Z90a40_S209_150716_ROW.qsb
You can download it from russian forum*, freely.
*I'm not allowed to post links, but enter the exact reference (Z90a40_S209_150716_ROW.qsb) in Google search (don't accept the Google's proposition to correct it), the link is the first answer. Use Google trad as I did if you don't speak russian .
Hello ,
I have a Lenovo vibe shot Z90-7
I wanted to set an international Rom 5.1 and now since it gets stuck on initializing indefinitely.
I have access to the recovery mode so I spend not to turn off the phone.
I Agency will proceed as this I put out the létélphone I press the volume + and I connect it to the ordidateur to put in download mode, but there is nothing after it launches in initializing .
So I essyer with presses of flight - and connects to the PC and it remains on the Lenovo logo.
In prériphérique manager there wrote lenovo ADB android.
Can not have Qualcomm hs -usb in the Port . even after installing the driver.
you have an idea what I can do?
Thank you
z90-7 not working
Hi,
i tried to install 20150619_VIBEUI_V2.5_1525_5.404.1_ST_Z90-7-Root_Phoenix rom on my lenovo vibe shot using Qfil , After Qfil finished flashing the mobile shutdown and It does not turn on anymore
and computer does not recognize it anymore.
what can I do??
Hello
Yesterday i have recieved the Pepsi (Koobee) P1S. it was full of bloatware so i decided to flash a modded rom. After i realized that this custom rom is only in english and chinese (Im German) i wanted to switch back to the original. But then i made the biggest mistake: I have flashed the false rom (CM for Mt6592 CPU but false Smartphone). After that i have flashed the right original rom again. but a strange Error appears: the Phone boot up normaly and then freeze and reboot by itself..over and over again. But not at the same step. Sometimes it freeze during the Bootanimation..sometimes it boot up completly and i can swipe through the Screens (for about 10 sec). When i push the standby button (Display went off) the Phone stays in this mode and dont freeze.
the i flashed TWRP and try to wipe the phone. Even in TWRP it freeze, but not during the wipes or in the Boot Mode slelect screen.
I Have a friend with the same phone. Is it possible to copy a complete backup (eMMC etc) to my phone? Or someone had a Idea what i can try next? I have flashed different roms (for this phone) so many times, but the error is still there.
Please help me.. It should be a present for my GF birthday today
SOLUTION
I downloaded the flashtool that flashes MTK Devices then searched google for Pepsi p1s needrom and downloaded the original firmware scatter file, turn off the P1S unplug it from USB,...Start the flashtool, and search the firmware will be second search bar select search and browse your computer for the firmware you downloaded from needrom, then you will see it load all the files.....there is a button bar that has an arrow open the arrow and select firmware update, then hit the green go button after you hit the green go button plug in your powered off PEPSI P1S ....it will give you a red bar on the flashtool at bottom first, then it will format your device properly, then install all the necissary files, its real quick about 3 minutes, after a box will pop up on the screen and say OK with a big check mark, at this point you can unplug your phone, power it up and wait about 3 minutes, everything will be normal again. So sorry I would post the links however I forgot my password and username that I was using for many years and forgot my recovery email as well.....so if you google it you can find the stuff, just hope I helped with the proper method of flashing......good luck, let me know how it goes.
Thanks but i know how to flash the firmware with SP Flash Tool. i have flashed the P1S with 3 different roms..but always the same error (freeze and reboot at different points)
Are you using download mode? Or firmware update? The reason I ask is download mode always gave me a bootloop, but when switched to firmware update mode it formats the device correctly and fixes the file structure, try firmware update mode.
Im using "Format All + Download"
Try using firmware update mode, let me know what happens.
same problem...freeze (at different points) ans reboot.
here you can see what happen:
https://www.youtube.com/watch?v=J1oFkgUwtOo
try this! P1
power off
then hold power button + volume down
the boot mode will appear
select recovery
it will show you no command
then pres power button first and the press volume up
now you device is on recovery
then select
wipe data/factory reset.
Blueray88 said:
Hello
Yesterday i have recieved the Pepsi (Koobee) P1S. it was full of bloatware so i decided to flash a modded rom. After i realized that this custom rom is only in english and chinese (Im German) i wanted to switch back to the original. But then i made the biggest mistake: I have flashed the false rom (CM for Mt6592 CPU but false Smartphone). After that i have flashed the right original rom again. but a strange Error appears: the Phone boot up normaly and then freeze and reboot by itself..over and over again. But not at the same step. Sometimes it freeze during the Bootanimation..sometimes it boot up completly and i can swipe through the Screens (for about 10 sec). When i push the standby button (Display went off) the Phone stays in this mode and dont freeze.
the i flashed TWRP and try to wipe the phone. Even in TWRP it freeze, but not during the wipes or in the Boot Mode slelect screen.
I Have a friend with the same phone. Is it possible to copy a complete backup (eMMC etc) to my phone? Or someone had a Idea what i can try next? I have flashed different roms (for this phone) so many times, but the error is still there.
Please help me.. It should be a present for my GF birthday today
Click to expand...
Click to collapse
I have noted one thing.
when I update supersu to play store and reboot it goes in bootloop.
so I recommend not to upgrade or even to make unroot just after removing apps with viruses
I'm not a n00b, I've rooted every Android device I've ever had, and I have my OnePlus Two running the latest CM14.1 nightlies. But I can not figure out what to do for this poor tablet.
I had downloaded and installed an OTA from Lenovo, but it must have been corrupt because the tablet got stuck in a boot loop. I can boot into recovery, so I tried formatting it and clearing all the caches, then it goes to a screen with a loading bar, which fills completely and just sits there. I've left the thing on all night. Nothing.
Sending it to Lenovo is a no-go because I voided the warranty when I rooted it.
I've also tried reinstalling the stock firmware, but the Intel phone flash tool either get's blocked by Windows 10 (with no way to whitelist it) or fails to flash properly.
crandroid99 said:
I'm not a n00b, I've rooted every Android device I've ever had, and I have my OnePlus Two running the latest CM14.1 nightlies. But I can not figure out what to do for this poor tablet.
I had downloaded and installed an OTA from Lenovo, but it must have been corrupt because the tablet got stuck in a boot loop. I can boot into recovery, so I tried formatting it and clearing all the caches, then it goes to a screen with a loading bar, which fills completely and just sits there. I've left the thing on all night. Nothing.
Sending it to Lenovo is a no-go because I voided the warranty when I rooted it.
I've also tried reinstalling the stock firmware, but the Intel phone flash tool either get's blocked by Windows 10 (with no way to whitelist it) or fails to flash properly.
Click to expand...
Click to collapse
What I've tried:
Just plain booting it - screen turns on and doesn't do anything, just black
Rebooting through recovery (power + vol_up) - plays boot animation, goes to a screen with a loading bar like it does after an update, but once the bar fills, a white line appears at the top of the screen and nothing happens
Downloading the official KitKat firmware (http://forum.xda-developers.com/android/help/lenovo-tab-s8-50f-stock-firmware-rom-t2989791), unarchiving the rar file and rearchiving it into a .zip, putting it on a MicroSD card, putting the card in the tablet, flashing through recovery - can't find the .zip, says SD card is blank
Clearing caches and wiping data - same as when rebooting through recovery
Using the Intel phone flash tool through bootloader (power + vol_down) - tool can't find device
Using the same tool through fastboot (power + vol_up + vol_down) - gets to the sleep 4000 ms step, reboots the device, then the device goes to the same loading screen and the flash tool can't contact it. I think it's trying to boot into the OS to finish the flash, but that's the problem to begin with
I've tried loading the temporary CWM session but that fails
I can't for the life of me figure out what the @bailka011 Unlock Tool is supposed to do or how to use it, plus the download link isn't working.
Can someone please guide my through this? I'm so confused
crandroid99 said:
What I've tried:
Just plain booting it - screen turns on and doesn't do anything, just black
Rebooting through recovery (power + vol_up) - plays boot animation, goes to a screen with a loading bar like it does after an update, but once the bar fills, a white line appears at the top of the screen and nothing happens
Downloading the official KitKat firmware (http://forum.xda-developers.com/android/help/lenovo-tab-s8-50f-stock-firmware-rom-t2989791), unarchiving the rar file and rearchiving it into a .zip, putting it on a MicroSD card, putting the card in the tablet, flashing through recovery - can't find the .zip, says SD card is blank
Clearing caches and wiping data - same as when rebooting through recovery
Using the Intel phone flash tool through bootloader (power + vol_down) - tool can't find device
Using the same tool through fastboot (power + vol_up + vol_down) - gets to the sleep 4000 ms step, reboots the device, then the device goes to the same loading screen and the flash tool can't contact it. I think it's trying to boot into the OS to finish the flash, but that's the problem to begin with
I've tried loading the temporary CWM session but that fails
I can't for the life of me figure out what the @bailka011 Unlock Tool is supposed to do or how to use it, plus the download link isn't working.
Can someone please guide my through this? I'm so confused
Click to expand...
Click to collapse
what did it says the update would do? android 6.0? latest update for this tablet was released 7 months ago... the unlock tool u mentioned unlocks the bootloader, and try to find a win7 pc to do the flashing. some users on a different forum stated that windows 10 will cause problems during flashing
good luck
xaocot said:
what did it says the update would do? android 6.0? latest update for this tablet was released 7 months ago... the unlock tool u mentioned unlocks the bootloader, and try to find a win7 pc to do the flashing. some users on a different forum stated that windows 10 will cause problems during flashing
good luck
Click to expand...
Click to collapse
This update was seven months ago. It did not claim to bring 6.0, just minor fixes.
Thank you for clearing that up, now I just have to figure out how to download and use it xD.
Also I have figured out how to enable the hidden administrator account in Win10 and use that to get around the security warning, still tries to boot partway through flashing. Unless there's some other part of Win10 that's disagreeing with it.
Sent from my ONE A2005 using Tapatalk
the same problem with me!
crandroid99 said:
What I've tried:
Just plain booting it - screen turns on and doesn't do anything, just black
Rebooting through recovery (power + vol_up) - plays boot animation, goes to a screen with a loading bar like it does after an update, but once the bar fills, a white line appears at the top of the screen and nothing happens
Downloading the official KitKat firmware (http://forum.xda-developers.com/android/help/lenovo-tab-s8-50f-stock-firmware-rom-t2989791), unarchiving the rar file and rearchiving it into a .zip, putting it on a MicroSD card, putting the card in the tablet, flashing through recovery - can't find the .zip, says SD card is blank
Clearing caches and wiping data - same as when rebooting through recovery
Using the Intel phone flash tool through bootloader (power + vol_down) - tool can't find device
Using the same tool through fastboot (power + vol_up + vol_down) - gets to the sleep 4000 ms step, reboots the device, then the device goes to the same loading screen and the flash tool can't contact it. I think it's trying to boot into the OS to finish the flash, but that's the problem to begin with
I've tried loading the temporary CWM session but that fails
I can't for the life of me figure out what the @bailka011 Unlock Tool is supposed to do or how to use it, plus the download link isn't working.
plz someone too guide me ,the same problem is happening but there is no appearance of a loading screen,when i switch on the tab ,it showws the lenova logo and goes to a black screen thats keeps on flahsing!! i dont knwo what to do ,when i connect to pc and try to flash it doesnt work,i dont what to do plz help me!!
Click to expand...
Click to collapse
Hello community,
I haven't posted here before, so I hope I'm not doing anything wrong.
I have a problem with my Neffos X1 and after browsing the internet for hours nothing helped so far, so I hope some of you can help me out.
My phone is stuck in a bootloop since yesterday evening. I haven't done any updates or new installations recently, so it just happened out of the blue. It loads till the Neffos logo and then restarts over and over again.
Since I can't take the battery out, I tried letting it run out of energy and then restart, but as soon as I connect it to a power source the bootloop will start again.
I read a lot about getting it in recovery mode or to try and flash it, but no matter what combination of buttons I try, nothing is happening. The phone basically doesn't react to anything and just keeps restarting. The only thing I noticed is, that when pushing both volume keys the screen will just stay black (no restarting), but after letting go the bootloop will start again.
I tried flashing it via SP Flash Tools, but the phone also doesn't react to it.
Lots of troubleshooting guides also require, that I have rooted my phone in the past, unfortunatly I haven't. I also read about unlocking the bootloader, but since my phone isn't reacting to any buttons and my laptop also doesn't seem to recognize my phone (probably because it doesn't boot proberly), that doesn't seem like a solution either.
To summarize: I'm stuck in a bootloop with no recovery mode, no rooting, no unlocking bootloader, probably can only use my laptop to do anything remotely.
So, is there anything you can think of, that might help me get out of the bootloop? Or ideas of what I may did wrong when trying the other solutions?
Thanks for any help in advance.
Same problem
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Shotzo said:
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Click to expand...
Click to collapse
Try this
Download phone's Stock Firmware onto your personal computer.
Install the USB MTK Drivers - NOT ANY OTHERS (skip if you have them already installed).
Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
Click the Scatter-loading button to navigate to the Stock Rom you just downloaded.
Select the Scatter File from the extracted Stock Firmware on your computer.
Select the Download Only in the SP flash tool option
Click the Download button to start the Formating process.
Connect your phone via USB to the computer>> holding volume + and volume – button of your phone at the same time or holding power button only so that the flashing process will starting working
Patiently wait for your device to be formatted.
After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
Unplug phone and boot it up.
If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
Voila, you are all good.