[KERNEL][4.2.2-5110/5100/5120] CivZ-SphereXtreme-Rev3.2 OC/UV_ExFat_GPU OC 700MHz....[11/nov/2013][discontinued]
NOTE:
I'm not a DEV and not pretending to be one, I'm a android enthusiast.
I would like to thank all XDA members that are helpful.
I build and mod stuff for my personal needs and then I share them.
Do I want something in return? NO.
You don't like it, no problem, there are enough good DEV's with there kernel to help you along
Click to expand...
Click to collapse
ONLY SUPPORTS Android 4.2.2 SAMSUNG STOCK BASED ROM
WARNING!:
Only flash the kernel for your device, flashing the wrong kernel can/will lead to hard brick. Never try to install the 5110/5100 on to the 5120 and never install the 5120 on to the 5110/5100.
CivZ-SphereXtreme-REV3.2-GT-N5110/5100/5120 And older versions.
I recommend TricksterMod or Performance Control (No gpu control) app to tweak the kernel
Use at your own risk
Take a Nandroid backup of your system and of your boot.img
You need to be on custom cwm to install this
SphereEngine KERNEL Features
Build using the JB 4.2.2 source of the GT-N5110 compiled with Google toolchain. If you change nothing these are the following Features/optimisations you get compared to Stock:
GPU default is now 533MHz (can be overclocked to 700MHz)
S-Pen Alignment fixed
Default Speeds 100MHz-1600MHz (Stock kernel = 200MHz-1600MHz)
Activating Saving power will result into 100MHz-1100MHz.
Init.d support
ARCH-Power enabled
Triangle away support (Only V2.90)
DynamicFSYNC = Use Terminal command or Trickster Mod app. = enabled by default.
Memory Leak fixed
mmc cap erase disabled ( just as a precaution )
Intelligent writeback
[*]IKCONFIG_PROC support
Driver support included in kernel:
NTFS / FAT / FAT32 / EXFAT support
3Gusb Support (ppp widget)
CIFS / UFS / ISO9660 / UDF_FS / HF / HF_PLUS
Realtek RTL8192CU/RTL8188CU USB Wireless Network Adapter support
Ralink driver support : Ralink rt2500 (USB) / Ralink rt2501/rt73 (USB) / Ralink rt27xx/rt28xx/rt30xx(USB)/rt2800usb - Include support for rt33xx , rt35xx , rt53xx
Extra Drivers: MAC80211 / RTL8187 / ATH drivers / EEPROM_93cx6 Support
Boeflla 1.6.0 Sound engine support
OTG Audio dock , Car dock support
Advanced users support
OC & UV support for CPU and GPU
Max CPU speed is 1920MHz
Max GPU speed is 700MHz
GPU full control
ZRAM
ReadaHead speed changeable
Governors: Adaptive, Pegasusq(default), Interactive, Powersave, Performance, Ondemand, Userspace, LulzActivQ, SmartassH3, ZZmoove.
Schedulers: cfq(default), Noop, Deadline, Row, Sio, VR
Changelog:
22/08/2013:
First public release Rev1.2
22/08/2013
Added version for GT-N5100
24/08/2013 Rev1.3 released.
Memory Leak fixed
mmc cap erase disabled ( just as a precaution )
Native ExFat support (compiled from exfat source)
Triangle away support (Only works on V2.90 triangle away)
25/08/2013 Rev1.4 released.
Kernel panic adjusted
Realtek RTL8192CU/RTL8188CU USB Wireless Network Adapter support
Ralink driver support :[/COLOR] Ralink rt2500 (USB) / Ralink rt2501/rt73 (USB) / Ralink rt27xx/rt28xx/rt30xx (USB) /
rt2800usb - Include support for rt33xx , rt35xx , rt53xx /
[Atheros Wireless Cards support
26/08/2013 Rev1.5 released.
Triangle away support rework (samsung had some other tricks)
Cleaned out some stuff
Github Source is released.
08/sep/2013
RELEASE OF NEW ShereEngine kernel to replace the StormCharger one.
Aimed for stabilty and smoothness
PLEASE READ KERNEL INFO FOR FULL DETAIL
10/sep/2013
REV1.2
Size improvement (LZMA compression)
Faster boot time
Clean rebuild
Governors added: SmartassH3, ZZmoove
13/sep/2013 : Support for the 5120 added.
16/sep/2013
REV1.3 = This kernel is already in FLEX-BEAM REV2.2
CPU slope fixed
IKCONFIG_PROC support
Extra drivers added: MAC80211; RTL8187; ATH drivers; EEPROM_93cx6 Support
Release of GITHUB source.
Support for 5110 / 5100 / 5120
21/sep/2013
REV1.4 = This kernel is already in FLEX-BEAM REV3.1
Ramdisk changes
Empty folder mounting fixed when using Cifs @ mkasick (Thanks to j-heath for pointing me out the problem) This is a problem that is caused by the multi-user support on Android 4.2.2 so the kernel and ramdisk needed some patching
Support for 5110 / 5100 / 5120
22/sep/2013: REV1.5 released
cpu slope change
memory leak fix in cpu-stats
ramdisk changes for the 5110
cleaned out my source before compiling.
support: 5110/5100/5120
11/Okt/2013: REV2.0 released
Based on the new source update 2 JB
Exfat build in , no more modules
S-Pen allignment fix still present as samung didn't solve the problem for 100%
support: 5110/5100/5120
25/Okt/2013: REV2.1 released
Reverted cpu slope changes for smoothness
Memory leak fix
support: 5110/5100/5120
[*]Github source updated to REV2.1 release
03/nov/2013: Xtreme REV3.0 released
Max CPU OC is 1960MHz
GPU Full control with max OC to 700MHz (Please note that you will need to raise the voltage of step 4 if you experience artifacts when overclocking)
Bug fixes made by samung
Interactive & Pegasusq governor updated
CPU frequency lock removed for smoothness and gaming
GPU trhesholds adjusted
support: 5110/5100/5120
04/nov/2013: Xtreme REV3.1 released
Max CPU OC is 1920MHz again for stability reasons
GPU Full control with max OC to 700MHz (Please note that you will need to raise the voltage of step 4 if you experience artifacts when overclocking)
Bug fixes
Default voltage drop on 533MHz speed. Remember to bump it with 2 steps if overclocking to 700MHz
GPU trhesholds adjusted to handle the load better
Default cpu / gpu settings adjusted to be more battery friendly
support: 5110/5100/5120
11/nov/2013: Xtreme REV3.2 released
Governors rework
PegasusQ back to samsung default (casuing lag in some apps)[/COLOR]
DevilQ governor added (Aggressive pegasusq governor , max 2 cpu cores to offline)
Hotplug governor added (only when screen is off 2 cpu cores to offline)
Ondemand with Flexrate activated
LulzActive updated (Puts max 2 cpu cores to offline status)
ZZmoove updated( Puts max 3 cpu cores to offline status)
support: 5110/5100/5120
Tip:
You can undervolt your CPU and GPU to increase battery life. It is up to you to find the best settings and to see if your tablet stays stable with these settings you made.
Click to expand...
Click to collapse
Thanks to:
AndreiLux
Faux123
For there kernel work and commits
XDA:DevDB Information
[KERNEL][4.2.2-5110/5100/5120] CivZ-SpherEngine OC/UV _ExFat _......-[08/sep/2013], Kernel for the Samsung Galaxy Note 8.0
Contributors
civato
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: SphereEngine
Stable Release Date: 2013-09-08
Created 2013-09-08
Last Updated 2014-05-26
The guy who bought his own Note works way harder on it then those who had theirs bought and paid for. Much appreciated man.
Sent from my Nexus 4 using Tapatalk HD
Stock boot.img from German N5100XXCMH1.
Great work!
nickdollahz said:
Stock boot.img from German N5100XXCMH1.
Great work!
Click to expand...
Click to collapse
Here you go, please test , it should work on GT-N5100.(Don't use on GT-N5110, not that your device will blow up :laugh
Attachment removed as I updated the OP for the support of the GT-N5100!
It works. Thanks again.
nickdollahz said:
It works. Thanks again.
Click to expand...
Click to collapse
Does the data connection is working now ?
Yes, data connection is working.
GT-N5100 = Everything is working great, data are working, thank you!
nickdollahz said:
It works. Thanks again.
Click to expand...
Click to collapse
nickdollahz said:
Yes, data connection is working.
Click to expand...
Click to collapse
rorda said:
GT-N5100 = Everything is working great, data are working, thank you!
Click to expand...
Click to collapse
OK , I will update OP.
Configuring the kernel
Dears,
May I ask how do configure the parameters of this kernel? Is there a separate app for me to do this just like Boeffal kernel?
How will I know the format of my external memory card... I'm afraid to flash this kernel because I feel my device might not read my external memorycard again... Please advice..
willmaister said:
How will I know the format of my external memory card... I'm afraid to flash this kernel because I feel my device might not read my external memorycard again... Please advice..
Click to expand...
Click to collapse
Make a backup, format and you will be ok always... there are simple tool for windows like guiformat... see also this http://forum.xda-developers.com/showthread.php?t=1803814
Inviato dal mio GT-N5100 con Tapatalk 2
soloilmeglio said:
Make a backup, format and you will be ok always... there are simple tool for windows like guiformat... see also this http://forum.xda-developers.com/showthread.php?t=1803814
Inviato dal mio GT-N5100 con Tapatalk 2
Click to expand...
Click to collapse
I read in that article that cwm 6.xx cannot read ex memory card if not on fat32... But my cwm can access my external memory card.. Does that mean I'm already on fat32 cus I have lots of information on my card... Please advise
mylee said:
Dears,
May I ask how do configure the parameters of this kernel? Is there a separate app for me to do this just like Boeffal kernel?
Click to expand...
Click to collapse
I use TricksterMOD app with success ...
Rev1.3 released
24/08/2013 Rev1.3 released.
Memory Leak fixed
mmc cap erase disabled ( just as a precaution )
Native ExFat support (compiled from exfat source)
Triangle away support (Only works on V2.90 triangle away)
Download and info in OP
Rev1.4
25/08/2013 Rev1.4 released.
Kernel panic adjusted
Realtek RTL8192CU/RTL8188CU USB Wireless Network Adapter support
Ralink driver support : Ralink rt2500 (USB) / Ralink rt2501/rt73 (USB) / Ralink rt27xx/rt28xx/rt30xx (USB) /
rt2800usb - Include support for rt33xx , rt35xx , rt53xx
Atheros Wireless Cards support
DOWNLOAD AND INFO IN OP
how it is different than the other ones of yours
[KERNEL][GT-N5110/5100][4.1.2]CivZ-StormBorn 1.92GHz-UV-GPU-EXFAT-3GUSB[25/08/2013]
Ohhh sorry didnot saw the 4.2.2
Sent from my GT-N5100 using Tapatalk 4
If experiencing lag when scrolling the app drawer or lag in general.
Don't worry I got that fixed, it got to do with the triangle away support.
Samsung got a lock on the bootloader values (new in 4.2.2) causing it to cause lag in the rom, I fixed that so next kernel release will be smoother. I had to change some stuff so the Triangle away is still supported
Expect it tonight.
Rev1.5 released
26/08/2013 Rev1.5 released.
Triangle away support rework (samsung had some other tricks)
Cleaned out some stuff
Lag fixed in app drawer
Github Source is released.
Download and info in OP
Related
AniDroid-N7000 ICS ROM
Short ROM Information:
AniDroid-N7000 Kernel included in this ROM was built from the latest CyanogenMod (CM9) source with the latest Linaro Toolchain (GCC 4.7.1)(Temporary in development..)
AniDroid-Hardened-N7000 ROM that will be also available soon will include GRsecurity Kernel and ROM support to provide different Security functionality for mobile devices..
Provided Features:
Linux Kernel version 3.0.43 (safe to use, without MMC_CAP_ERASE-related BUG)
Kernel built with the latest Linaro Toolchain (GCC 4.7.1) (Temporary in development..)
CWM Recovery v6.0.1.2
KSM support (Kernel Samepage Merging) to optimize memory usage
SLQB Memory Allocator instead of default SLUB
CPU Overclocking (OC) up to 1.6 GHz support
GPU MAX Frequency changed to 250 MHz to save more battery
GPU Voltages are decreased to save more battery
NEW CPU Frequence Scaling Governors: PegasusQ, Adaptive, MinMax, SmartAssV2, InteractiveX, ConservativeX, LagFree, LulzactiveV2, Intellidemand, Scary, LionHeart, Wheatley, SavagedZen, BrazilianWax
CPU Voltage Control - Undervolting/Overvolting (UV/OV, use with NSTools App)
Automatic Process Group Scheduling
USB OTG support (please use with special USB Host OTG Cable)
EXT4, CIFS filesystems support
init.d support
2048 Kb ReadAhead
Default fonts from JellyBean
In Development:
GRSecurity version 2.2.2 with different security features enabled by default (Will be available in AniDroid-Hardened ROM soon.. see GRSecurity Feature List for details)
Advanced CPU LiveOC!!! (ALOC) support with Selective LiveOC MOD (Thanks to byeonggonlee! In most cases LiveOC and OC itself need overvolting (OV) due to stability issues! Each device has it's own stability limit, some devices don't need OV with lite OC. So, in most cases you need to choose optimal OV value on each OC value for your own device!)
NTFS filesystem read/write support
HIGH BIGMEM that provides more available memory for Android on device
Backlight Notification (BLN, notify you about new events by blinking Menu and Back buttons)
Backlight Dimmer (BLD, let you turn off the backlight of the Menu and Back buttons when using with soft buttons only)
Battery Life Extender (BLX, let you limit the maximum battery charge level)
45 FPS and 65 FPS Screen Refresh Rate support (you can see the difference in Battery Drain)
-fstack-protector buffer overflow detection
USB Fast Charge (FC) feature that force adapters that are detected as USB to charge as AC enabled
GRSecurity Feature List (will be available in AniDroid-Hardened ROM soon..):
Active Exploits Protection (deter exploit bruteforcing, active kernel exploit response)
Role Based Access Control (RBAC)
Filesystem Advanced Protection (including advanced security for applications running in CHROOT environment)
Full Kernel Auditing (event logging for many process-related kernel events)
Executable Protection (deter ptrace-based process snooping)
Network Protection (TCP/UDP blackhole and LAST_ACK DoS prevention)
Larger Entropy Pools support (adds additional randomness to grsecurity features)
Managing support via Sysctl Interface
CPU Frequence Scaling Governors:
PegasusQ
Adaptive
Conservative
Userspace
Powersave
Ondemand
Performance
MinMax
SmartAssV2
InteractiveX
ConservativeX
LagFree
LulzactiveV2
Intellidemand
Scary
LionHeart
Wheatley
SavagedZen
BrazilianWax
IO Schedulers:
CFQ
Noop
Deadline
Simple IO (SIO)
VR (Default)
Installation instructions:
If you are coming from the previuos version of AniDroid-N7000:
Download ZIP file with the version of AniDroid-N7000 and put it on Internal/External SD-card
Download ZIP file with Google Apps and put it on Internal/External SD-card
Boot into ClockworkMod Recovery
Choose "Install ZIP from SD-card/External SD-card"
Choose ZIP file AniDroid-N7000 ROM you've just put on SD-card
Choose "Yes" to flash the ZIP
Flash ZIP file with Google Apps in the same way (you must do it after flashing every new version of AniDroid-N7000!!!)
If you are coming from another ROM:
Download ZIP file with the version of AniDroid-N7000 and put it on Internal/External SD-card
Download ZIP file with Google Apps and put it on Internal/External SD-card
Boot into ClockworkMod Recovery
If you are on a leaked ICS kernel, please flash a known safe kernel from the sticky in the development section!!!
Do a Nandroid Backup to make full backup of your currently installed firmware
Choose "Wipe Data/Factory Reset" and choose "Yes" to do a full wipe
Choose "Install ZIP from SD-card/External SD-card"
Choose ZIP file with AniDroid-N7000 ROM you've just put on SD-card
Choose "Yes" to flash the ZIP
Flash ZIP file with Google Apps in the same way (you must do it after flashing every new version of AniDroid-N7000!!!)
Changelog:AniDroid-N7000 v0.1 - v0.2:
SLQB Memory Allocator is now used instead default SLUB
NEW CPU Frequence Scaling Governors added: MinMax, SmartAssV2, InteractiveX, ConservativeX, LagFree, Lulzactive, Lazy, Intellidemand, Scary, LionHeart, Wheatley, SavagedZen, BrazilianWax
EXT4, CIFS support
2048 Kb ReadAhead support
Fixed CM error due to lazy copypasta
AniDroid-N7000 v0.2 - v0.3:
Linux Kernel updated to 3.0.36
Different Kernel source improvements devoted to GCC 4.7.x support
CM9 source updated (See the Changelog)
AniDroid-N7000 v0.3 - v0.4:
PegasusQ and Adaptive CPU Frequence Scaling Governors added
FIX for correct CPU Frequence Scaling Governors
CPU Overclocking up to 1.6 GHz support added
CM9 source updated (See the Changelog)
AniDroid-N7000 v0.4 - v0.5:
Linux Kernel updated to version 3.0.37
ReadAhead value changed to 1024 kb
CWM Recovery is now updated to v6.0.0.7
CM9 updated to RC2 (See the Changelog)
AniDroid-N7000 v0.5 - v0.6:
Linux Kernel updated to version 3.0.38
Kernel source is now porting for completely support new compilers like Linaro GCC 4.7.x (still in development)
Fixed BUG with Apps installation on Internal/External memory
ReadAhead value changed to 2048 kb
Lazy CPU sheduler was removed
CWM Recovery is now updated to v6.0.1.0 (Fixed BUG with empty folders in CWM)
CM9 updated to the latest nightly (See the Changelog)
AniDroid-N7000 v0.6 - v0.7:
Kernel: UMS Mass Storage FIX (UMS Mass Storage mode is now working correctly)
Kernel: GPU (Mali400) MAX Frequency is now changed to 400 MHz (insted of 300 MHz in default CM9 kernel) without rising the voltage and battery usage
ROM: default fonts from JellyBean are now used
CWM Recovery source updated to the latest from CM9 repo
AniDroid-N7000 v0.7 - v0.8:
GPU MAX Frequency changed to 250 MHz to save more battery (performance is still great)
GPU Voltages are decreased to save more battery
Additional Soft Keys are added to make the ROM more convenient for the left hand usage
CM9 updated to the latest nightly (See the Changelog)
AniDroid-N7000 v0.8 - v1.0:
Linux Kernel updated from 3.0.38 to 3.0.42 (See the Changelogs)
CWM Recovery updated to 6.0.1.2
Additional SoftKeys have been removed
Rom base updated to the latest CM 9.1 (See the Changelog)
AniDroid-N7000 v1.0 - v1.1:
Fixed Voltage control issue for 200 MHz
CM9.1 updated to the latest nightly (See the Changelog)
AniDroid-N7000 v1.1 - v1.2:
Linux Kernel updated to 3.0.43 (See the Changelogs)
CPU default voltage for 1600 MHz increased by 25 mV due to stability issue
KSM support enabled (Kernel Samepage Merging) to optimize memory usage
Download Links:
Current ROM Binaries:
AniDroid-n7000-v1.2_20092012.zip
AniDroid-n7000-v1.2_20092012.md5
Current Kernel Binaries:
AniDroid_Kernel_v1.2_20092012_CWM_Flashable.zip
AniDroid_Kernel_v1.2_20092012_CWM_Flashable.md5
Previous versions:
Previous versions binaries
Google Apps:
GApps
Kernel Source Code:
AniDroid-Kernel-N7000 on GitHub
Donators: Petr Malek, Chasmodo, Lucian1, Dtswk, Mfractal, Jolillo, Antonius0809, Christian Murmann
Great Thanks to CyanogenMod for the ROM and kernel base!!!
Thanks to eugene373, koush, ezekeel, supercurio, morfic, franciscofranco, sztupy, reddv1, byeonggonlee!!!
welcome mate! another rom for enjoyment! cheers!
btw...id be forward to request for screenshot or probably a video...thanks
jermitano said:
welcome mate! another rom for enjoyment! cheers!
btw...id be forward to request for screenshot or probably a video...thanks
Click to expand...
Click to collapse
Thanks!!! I'll post several screenshots tomorrow
Sent from my GT-N7000 using xda premium
Sounds great ... Good luck
Sounds very interesting. Which Parts from the "In Development" List are already in the ROM?
Admittedly I'm a stock user, but it's great to see the Linaro stuff coming to the Note. It'll be interesting to see peoples views on performance etc... Nice work anyway dude.
Sent from my GT-N7000 using Tapatalk 2
one more ROM! downloading...
dasich82 said:
Sounds very interesting. Which Parts from the "In Development" List are already in the ROM?
Click to expand...
Click to collapse
Currently I'm porting these features from my AniDroid-Hardened Kernel for Nexus S
I'm also want to provide the Control Application to let you safely manage these features..
Give us battery screen shots! Please
Wysyłane z mojego GT-N7000 za pomocą Tapatalk 2
Ohh great another rom to satisfy my ocfd
One more ROM to test when NTFS support will be enabled
The_Steph said:
One more ROM to test when NTFS support will be enabled
Click to expand...
Click to collapse
NTFS support can be useful with USB OTG-enabled device
Sent from my GT-N7000 using xda premium
Installation guide?
absan said:
Installation guide?
Click to expand...
Click to collapse
Will add.. right now you can use installation guide from STunner or Asylum ROMs..
Sent from my GT-N7000 using xda premium
looks good from the features you listed
would like to see video/pics.
Excellent - a great Nexus S dev makes his way to Note Land.
Sent from my GT-N7000 using xda premium
Great news! Looks very promising:good:
Can you possibly post something like "Работает/не работает" section? "In development" section looks exiting, though no sure info about CM9 source synced with (last 4 nightlies full of important changes), and stuff...
Спасибо:good: Отлично выглядит
Could anybody tell us how much differencte Linaro makes for the note?
Or maybe even a video?
Just added Installation Instructions into the Main post...
Have fun!..
Thank you for your efforts .. I hope to night I have time to flash you rom
I modified N7105 Kernels for Korea Galaxy Note2 users. (SHV-E250*)
This kernel is originally based on Perseus and RedPill.
SHV-E250* is Galaxy Note2 Korea LTE version.
recommand Stock Rom version is E250* VLJK
Really ESPECIALLY THANKS to
AndreiLux (Perseus for GS3 and Note2 Kernel Developer))
pongster and HyperDroid Dev Teams (RedPill Kernel Developer)
glewarne (NoteCore Kernel Developer) i was use at GT-N7000
gokhanmoral (Siyah Kernel Developer) he is mentor ....
And...
Korean Testers ( matcl.com, Develoid... etc.. )
-Current Version : 1.07
http://kernel.sjkoon.com/
SKTelecom (SHV-E250S) - skt folder
KoreaTelecom (SHV-E250K) - kt folder
LG Uplus (SHV-E250L) - lgfolder
if you want CM,AOSP Kernel - ~cm folder (~ is skt,kt,lg)
Its my Github
I am git starter.. sorry
http://github.com/sjkoon/SJKernel-gn2
Change log
1.07
Adjustable screen color detail (described in the English description of the sTweak Please refer).
- Mmc: built-in sd-related modifications.
- I / o: ext4 related to the latest code updates.
- Cpufreq: pegasusq Governor partially removed io wait (io improve input and output)
[Special Thanks for Andreilux] and thanks, as always, to SKjames19
1.06
- Initrd (Boeffla sound engine mount / sTweaks modify /)
Adjustable charging current (charging rate) - initrd: sTweaks
- Mdnie: mdnie modify the code
- Mali-m400: mali GPU Tweak some modifications related to the stability
- Power: power related to standby mode Gatwick apply fast (battery improve)
1.05c(2013-1-14)
- initrd fixed (rooting fix, NTFS mounting fix)
- initrd : little tweaks added (mount options, vm values)
- initrd : cpuidle setting value changed samsung official)
- initrd : now we can change cpuidle setting value in STweaks. (you need to remove /data/.sjkernel folder)
- t0-power: undervolted regulator (max77686)
- CM,AOSP version updated. (1,05)
1.04(2013-1-9)
- Exynos-mem*bug*patch changed SamsungOSRC official release.
- mmc: mshci timeout error fix.
- mmc:*MoviNAND 16GB death Bug fix (GS3, samsung official)
- mmc: irq pending problem fix (samsung official)
- Harmonized regulator max voltages.
1.03a(2013-1-8)
- STweaks config save bug fix (sjkernel folder not saved bug fixed)
1.03 (2013-1-8)
- Memory voltage/threshold/sampling rate control added
- Sensorhub driver updated
- Touchscreen driver updated
- Enabled AFTR by default
- I/O sched tweaks (run queue logic tweaks)
- fixed bug : use get_random_int() to fix entropy depleting
- pegasusq: Replace governor nr_running logic (Thanks to andreilux)
- samsung-battery: Reduce battery-monitor wakelock timeouts
[ VERY SPECIALLY THANKS TO AndreiLux!! all tweaks provided by andreilux.]
1.02b (2013-1-3)
- MMC_CAP_ERASE removed (for safety)
- USB Charge rate increased 1700. (fast charging)
1.02a (2013-1-1)
- tmu: add toggle to turn on/off thermal throttle. ( /sys/module/tmu/parameters/throttle_enabled )
- Makefile add -pipe compile option
- Revert "vfp: Makefile changed neon to vfpv3 (more smoother)" (for safety)
1.01f (12-25)
- revert "cpufreq_pegasusq: set sampling_rate to 200000 when the screen is off even if we have another sampling rate set. and set freq_step to 10"
(may be fix batter drain issue at standby)
1.01e (12-24)
- cpufreq-4x12: CPU maximum clock added 1920Mhz
- cpufreq: Booting CPU clock 1.6Ghz (Thanks to redpill)
- cma: Improved Exynos-mem fix (Thanks to Andreilux)
- pegasusq: Don't scale down inside of flexrate sub-samples (Thanks to Andreilux)
- initramfs: Fixed SuperSU removed bug when reboot after unroot
- cpufreq_pegasusq: set sampling_rate to 200000 when the screen is off even if we have another sampling rate set.
- cpufreq_pegasusq: set freq_step to 10.
- CM : exynos-mem: all security fix added
- ramfs: STweaks readahead and GPU part func add. (Thanks to Andreilux)
- ramfs: io scheduler apply fix
-mali: Add control for utilization timeout (Thanks to Andreilux)
1.0f2 (12-18)
- NTFS auto mounting (is only boot progress)
- tick-sched : recalculate sleep length each time it is requested (timer fix for deepsleep)
- tick : Fix the spurious broadcast timer ticks after resume
- s6evr02: Allow max brightness at 255
- smdk4412: s3cfb_s6e8ax0: Stop fb ****storm in kmsg
- mem: fix permissions on exynos-mem
+ CM,AOSP version WIFI Fix use to initrd script.
1.0e (12-17)
- i forgot RWSEM_XCHGADD_ALGORITHM add. now work.
1.0b~d (12-15)
- switch fmpu neon to vfpv3 (more smoother)
- LGT Ramdisk 4.1.2 updated.
- vibrator fix
- I/O and memory block upgraded to linux kernel 3.3
- STweak some fix.
- STweak gpu voltage fix
(Special Thanks to Andreilux)
- exfat support removed.
- ROW and FIOPS scheduler added.
- 1.0d2 : LGT 4.1.2 initramfs updated ( Thanks to HereiM - Matcl.com user)
- CM AOSP Support.
1.0a (12-13)
- update 4.1.2 initramfs (250K, 250S , exclude 250L) - fully support 4.1.2
1.0 beta2 (12-13)
- nice IO stability
- jRCU Removed(it caused very unstable IO (when use Torrent, heavy IO traffic)
- SLUB (SLQB removed)
0.82RC4 (12-11)
- IO elevator fix for more fast speed
- BFQ, SIO , Deadline, Zen some fix
- SLQB Memory allocator (it improve smooth)
- NTFS Support (not OTG, only storage)
0.82RC3 (12-10)
- BFQ Added.
- elevator : fix stability (revert tweaks)
- tcp.h fix - for connection stability
- mm: function fix - for io stability
- mali stability fix
- etc bug fixed.
0.82RC3 (12-10)
- BFQ Added.
- elevator : fix stability (revert tweaks)
- tcp.h fix - for connection stability
- mm: function fix - for io stability
- mali stability fix
- etc bug fixed.
- revert: sched Tweak readded.
- Dynamic Fsync Added.
- Fsync Control removed.
- initramfs fix ( root fix )
0.81a & b (12-06)
- sched Tweak readded.
- debug almost off (0.81b)
- CPU unaligned access path (0.81b)
- Gentle_fair_sleepers OFF , for stable (0.81b)
0.81beta11~13
- i remove sched tweaks.
- sio stability fix
- STweak function more added (for CPU scaling, GPU Clock)
- mDNIE Config Added (use script)
- USB connect CPU clock lock fix
- voodoo sound final fix
0.81beta10 (12-04)
- sio more tweaks for stability. (Thanks pongster, redpill)
- zen scheduler added.
0.81beta9 (12-03)
- Make the voltage interfaces step dynamic
- Mali freq control fix.
- Pegasusq Tweak for more dynamic scaling and core usage.
- init.d fix
0.81 beta8
- Increase Mali shared memory allocation
- sio, deadline scheduler modify. (kernel stability increased)
- STweak Support
- LED Fade opt Support (is not correctly work maybe?)
- other fixes (sensorhub firmware update ...)
0.81 beta7
- debugfs disabled
- mmc debug disabled
- all debug disabled
- CPU unaligned access path
- sched: don't call task_group() many times in set_task_rq()
0.81 beta6
- Voodoo sound temporary fix for Galaxy note2
- Auto Rooting added
0.81 beta5
- toolchain changed
- motor low voltage
- fix apply nohz tweak
0.81 beta4
-joe's rcu used. (Default rcu is jrcu)
-lowmemkiller sync added.
0.81 beta3
- sched.c - fix some little things.
- VR scheduler Added
0.81 beta 1~2 (2012-11-26)
beta2
- Flexible clock control readded.
beta1
- workqueue tweak
- ext4 & fifo tweak
- pegasusq little tweak
- wakelock tweak
0.8b (2012-11-24 #2)
- camera, keypress, modem, MHL driver updated.
- motor under voltage.
0.7 ver. (2012-11-20)
- lots of tweaks ext4 and I/O
- Voodoo sound tweaks added (default, not completely yet)
- Workqueue Tweaks.
- Linaro Toolchain 4.7.4 used.
- sourcecode fix some error with gcc 4.7
- jrcu: Add Joe Korty's RCU (jRCU may also be a good choice for systems with low latency requirements.)
- update LZO Compression, Improved kernel speed
- use single threaded workqueueus wakelock
- apply SCHED_FIFO to kthreadd ( Setting SCHED_FIFO will cause kthreadd to run immediately. )
- disable preemption in machine_shutdown
If You Want CM or AOSP.
you need go to AT&T Galaxy Note II Forum.
at&t version CM, AOSP is Compatible.
Wait for international n7105 version
Sent from my GT-N7105 using Tapatalk 2
kevin_diu said:
Wait for international n7105 version
Sent from my GT-N7105 using Tapatalk 2
Click to expand...
Click to collapse
i'll trying it soon. Thanks for regards.
Oh great that you released here for the Korean users, I didn't get myself to make a version for them because of the language barrier and the English speaking ones couldn't deliver me a initramfs.
Don't forget to put your GH link in the OP for others.
Oh i forgot it! Thanks!!
Sent from my SHV-E250S using xda app-developers app
OP, thanks a lot. If you need a good custom ROM to start a developing base on, PM me and I'll send you a link.
AndreiLux said:
Oh great that you released here for the Korean users, I didn't get myself to make a version for them because of the language barrier and the English speaking ones couldn't deliver me a initramfs.
Don't forget to put your GH link in the OP for others.
Click to expand...
Click to collapse
I sent you a PM asking what you needed, but maybe you didn't see it. Still, if you'd like the files, tell me exactly what you need me to grab. I'm more than happy to help you out.
Hi, can you please put a big red line in the OP saying that this is not for the International version? i know many people will miss that small line you have now and will be sh*tload of posts wondering why their phone got bricked
hannsz said:
OP, thanks a lot. If you need a good custom ROM to start a developing base on, PM me and I'll send you a link.
I sent you a PM asking what you needed, but maybe you didn't see it. Still, if you'd like the files, tell me exactly what you need me to grab. I'm more than happy to help you out.
Click to expand...
Click to collapse
I get a lot of PMs, sorry. I would prefer somebody else doing versions for the Korean phones as they have some changes in the source. Maybe some day but not for now. SJKoon proved already to be helpful by debugging the audio enhancements and neutering the call detection, I'm sure he'll do a good job on the rest of things.
always nice to see new Dev's
keep it up ur good work :good:
Great performance, as expected. Here's a few benchmarks. OP, if you ever need anything specific from the E250L phone, I'll be more than happy to help!
Nice to see this!
Will be trying your kernel out soon, mate!
Btw, does your kernel support NTFS/ExFAT for 64gb sdxc cards?
Just flashed v0.8b...
Here is my Antutu score...
Sent from my SHV-E250S using Tapatalk 2
Thanks for reports!
Some korean user report freeze at IO works.
I'll release newer beta version soon.
Sent from my SHV-E250S using xda app-developers app
Oh... i forgot here is international forum..
:'(
I added Red font effect . Thanks
Sent from my SHV-E250S using xda app-developers app
sjkoon said:
Thanks for reports!
Some korean user report freeze at IO works.
I'll release newer beta version soon.
Sent from my SHV-E250S using xda app-developers app
Click to expand...
Click to collapse
That's awesome!
Would you consider adding zen too?
Sent from my SHV-E250S using Tapatalk 2
---------- Post added at 08:30 PM ---------- Previous post was at 08:28 PM ----------
sjkoon said:
Oh... i forgot here is international forum..
:'(
I added Red font effect . Thanks
Sent from my SHV-E250S using xda app-developers app
Click to expand...
Click to collapse
Would be helpful if the mods open another Korean thread... Just saying... LOL
Sent from my SHV-E250S using Tapatalk 2
coolfire said:
That's awesome!
Would you consider adding zen too?
Sent from my SHV-E250S using Tapatalk 2
Click to expand...
Click to collapse
I planed zen scheduler add.
Maybe next release.. include that things..
Sent from my SHV-E250S using xda app-developers app
sjkoon said:
I planed zen scheduler add.
Maybe next release.. include that things..
Sent from my SHV-E250S using xda app-developers app
Click to expand...
Click to collapse
Sweeeeetttt.... And 2GHz as well! LOL
coolfire said:
Sweeeeetttt.... And 2GHz as well! LOL
Click to expand...
Click to collapse
i added zen scheduler. (test please..)
sjkoon said:
i added zen scheduler. (test please..)
Click to expand...
Click to collapse
Everything seemed fine on 0.81-beta10, except my 64GB microsdxc could no longer be detected - it kept showing as an empty extsdcard folder which was empty and on every reboot, there is always a prompt that i can safely remove my card. I also tried mounting the card from within settings-storage but not successful...
Back to 0.8b for now...
Sent from my SHV-E250S using Tapatalk 2
Hi, I wanted to try something for the Galaxy Player 4.0. I know that the hummingbird processor inside of it had a lot of potential and I want to extract all the power it has to offer . To do so I had to use any tools that could help me achieve that objective . Now enough with the talk and more with the actual content of this kernel. Note that this kernel works for both versions (US and Intl, Korea can work but it hasn't been tested).
Disclaimer: This is a MTD kernel, it will only work with CM based ROMS (CM10.1 and up). Flashing it in a GB ROM could result in a brick, Also I'm not responsible to any bricks caused by this kernel.
Features:
Linux 3.0.101
Compiled it using Christopher83 custom Linaro 4.7.4 toolchain optimised for Cortex-A8 chipsets (4.9.1 For Android 4.4 and up)
Cranked it up with -O3 optimisations and -Ofast optimsations for GPU
LZ4 Compression for kernel and crypto
OC available up to 1.2 GHz (through 100 MHz steps)
Available governors (8): Lulzactive, SmartassV2 Intellidemand, Conservative, Ondemand, Interactive, Userspace and Powersave.
Available I/O schedulers (5): Noop, Deadline, Fiops, Row, Cfq, Sioplus, Bfq (Row is enabled by default)
Updated GPU drivers ([email protected] )
Tweaked and optimised I/O schedulers
Sound improvements (ALSA, PCM)
ARM RWSEM optimisations
Optimised SLUB memory allocator
Timer slack controller support
Backported CPUidle from 3.5 kernel
Support for swap
CIFS
TUN
Zram
Ext4 optimisations
Fast Charge
Fast wifi while in standby
Support for OTG connectivity
NTFS and FAT read and write support
Undervolted the LCD panel by 20%
LMK backported from kernel 3.4
Minimum brightness lowered (Needs confirmation)
Always up-to-date with Bbelos and Cyanogenmod Aries sources
720p Video recording support
Download:
4.4:
r7.1: r7.1 CWM Download
r7: r7 CWM Download
r6: r6 CWM Download
r5: r5 Download
4.3:
r4.6: r4.6 Download
r4.5: r4.5 Download
r4: r4 Download
r3: r3 Download
4.2:
r2.1: r2.1 Download
r2: r2 Download
r1: r1 Download
Installation:
Flash the zip with CWM. (Yes it's that simple )
Note: with the newer version of CWM, you'll need to flash the zip from the internal sdcard ONLY. If you want to use the external sdcard to flash the zip, please mount the internal one first as it will cause your device to be stuck in the samsung logo.
Sources:
Here you can find my sources if you want to do something.
https://github.com/zaclimon/impulse_ypg1
Thanks:
Bbelos
Mevordel
DerTeufel
Kasper_h
Alberto96
DerRomtester
Christopher83
Android1234567
Koala888
Changelog:
4.4.x
r7.1 (26/06/14)
Compiled with 4.9.1 GCC from Christopher83 (2014.06)
Patched futex exploit (Towelroot)
r7 (27/05/14)
Synced with the dev repo
Smaller kernel size
Compiled with the 4.9.1 Optimized GCC from Christopher83. (2014.05)
r6 (18/04/14)
Synced with the *regular* aries repo
Compiled with the newer 2014-01 Christopher83's toolchain
Removed 1.3 and 1.4 GHZ OC for stability purposes, however I added 1.1 GHZ if you needed it.
Added the BFQ I/O Scheduler
Added support for the 720p video recording as well as some fixes for preview
Misc optimisations.
r5 (17/01/14)
Android 4.4 support (KitKat)
Stuff synced from the dev repo as well (Front cam fix, lvm etc...)
Changed some optimisation flags
Optimised with newer 2013-12 Christopher83 toolchain
Fixed some other stuff
4.3.x
r4.6 (17/02/14)
Fixed the rotation (for the camera)
Misc fixes
r4.5 (12/12/13)
Updated to Linux 3.0.101
Increased the voltage on 1.3 Ghz OC (should fix the SOD's)
Included the fix for newer CM and Pac-Man Roms
Updated to the 11/13 toolchain from Christopher89
r4 (14/10/13):
Upstream changes from bbelos and aries tree (resized the /system and /cache partition)
Added 1.1 and 1.3 GHZ OC steps
Backported Cpuidle from 3.5 (not deep idle as it's been reported that it causes stability issues)
Updated the GPU drivers to [email protected]
Added a new I/O scheduler: sioplus (based from sio but better)
Enabled LZ4 compression and decompression for kernel and crypto
Added a fix for PACman users who was stuck
Misc improvements and fixes, check github for details
r3 (15/09/13):
Linux 3.0.95
Fully compatible with android 4.3 roms (cm10.2, PAC)
Used the newer 09/13 linaro toolchain from christopher89
ALSA PCM patches from newer kernel versions
Ext4 Optimisations
Timer slack controller support
Optimised SLUB Allocator
Optimised ARM RWSEM
Fixed right speaker
Updated the intellidemand governor (should be more efficient and shouldn't cause SOD's if it was the case before)
Misc optimisations (check github for more details)
4.2.x
r2.1(31/07/13):
Increase voltage to 1.4 Ghz OC in order to fix the freezing issue.
r2 (27/07/13):
Updated to linux 3.0.86
Revamped the I/O schedulers core drivers (Noop and Row tweaked as well, thanks to Derteufel)
Added FIOPS I/O scheduler
Enabled zram
LiveOC support (it may be half baked, would need the implementation of custom voltage to reveal it's full potential)
Replaced Wheatley with SmartassV2 as per user requests
Fast charge support (Download NS tools or a fast charge app to enable)
Updated BCMDHD drivers to 5.90.195.114
Enabled PM_FAST config for wifi (wifi speeds while sleeping should be as fast as when turned on)
Lowered the brightness down to the hardware's maximum
Added USB OTG host support (I would need confirmation as it's support) Enabled full FAT and NTFS read and write support into the kernel
Tweaked the VM values (Dalvik stuff)
Some under the hood refinements
r1 (08/07/13):
Initial release
Things planned to be implemented:
You propose
Digital FM radio works, which does sound better than the salsa method.
Bottom speaker still sounds quieter.
How fast is fast charge?
Sent from my YP-G1 using Tapatalk 2
dorfd1 said:
Digital FM radio works, which does sound better than the salsa method.
Bottom speaker still sounds quieter.
How fast is fast charge?
Sent from my YP-G1 using Tapatalk 2
Click to expand...
Click to collapse
I don't know how much time it takes for fast charge. Actually fast charge is only something that makes your device think that you're using AC when you charge with your computer. And I still yet implemented it.
Wow, I am happy that you decided to make kernel
props
About lowering screen brightness.
Sometimes kernel modification works, but framework lets us only set it to stock lowest minimum brightness. Try rootdim and see if it allows you to set your brightness lower
I will have a closer look at your repo when I will be on PC
Wysłane z mojego Nexus S za pomocą Tapatalk 4
as a future feature could you force enable adb? otherwise porting roms is impossible because I can't get a bootloop logcat
Awesome work! I will flash it this weekend
I'm still in 4.1 though can i just flash it or do i need to do it from the start?
And what are features like CIFS and TUN?
crancpiti said:
Awesome work! I will flash it this weekend
I'm still in 4.1 though can i just flash it or do i need to do it from the start?
And what are features like CIFS and TUN?
Click to expand...
Click to collapse
I believe you need 4.2.2
Sent from my Amazon Kindle Fire using Tapatalk 4 Beta
theraf said:
as a future feature could you force enable adb? otherwise porting roms is impossible because I can't get a bootloop logcat
Click to expand...
Click to collapse
I don't know well as far as the 4.2.2 kernel related, adb needs to be enabled from the dev section (because of security reasons) except for the first boot where it is doing an initial logcat than lock itself. I can try to do something though.
crancpiti said:
Awesome work! I will flash it this weekend
I'm still in 4.1 though can i just flash it or do i need to do it from the start?
And what are features like CIFS and TUN?
Click to expand...
Click to collapse
It can work but I'm not giving support for it. Also cifs is known for mostly remote file access and tun for vps servers.
Envoyé depuis mon Nexus 7 avec Tapatalk
Great work on this! I have one suggestion though. Can the amount of available ram be increased? I know the kernels on the 5.0 have done it, so I don't see why it would not be possible on the 4.0 (and everyone loves more ram!).
WHib96 said:
Great work on this! I have one suggestion though. Can the amount of available ram be increased? I know the kernels on the 5.0 have done it, so I don't see why it would not be possible on the 4.0 (and everyone loves more ram!).
Click to expand...
Click to collapse
I would need to find the right amount of ram that the camera needs (which could take some time).
Base on others sources
Wysłane z mojego Nexus S za pomocą Tapatalk 4
KOala888 said:
Base on others sources
Wysłane z mojego Nexus S za pomocą Tapatalk 4
Click to expand...
Click to collapse
I can't use the same amount of ram as the 5.0 because it will crash the camera, I will try to put 10000 instead of 14000.
I've been using this for a day and a half or so. Looking good so far.
At 1GHz, UI performance compared to the "regular" 3.0 kernel feels the same. Sunspider completes about 300ms faster, and Nenamark2 is consistently 1fps higher, but no difference with any other benchmark I tried. Modern Combat 4 now also runs with no stutters- I figure since Linaro has no performance benefits this must be due to the -O3/-Ofast optimizations (which by the way: what is O3 and Ofast? Can't find any info searching).
Battery life seems good so far.
Haven't experienced any odd crashes or lags.
Great job so far, I'll continue playing around with this- might use it in a future ROM.
zaclimon said:
I can't use the same amount of ram as the 5.0 because it will crash the camera, I will try to put 10000 instead of 14000.
Click to expand...
Click to collapse
I ment sources of kernels for different devices using same soc as yours
Wysłane z mojego Nexus S za pomocą Tapatalk 4
KOala888 said:
I ment sources of kernels for different devices using same soc as yours
Wysłane z mojego Nexus S za pomocą Tapatalk 4
Click to expand...
Click to collapse
Hmm well I checked venturi and derteufel sources, no good. I'll check p1 and Crespo later.
Hey guys I'm considering this, would you like to get TWRP instead of CWM as far as the recovery solution goes?
Envoyé depuis mon Nexus 7 avec Tapatalk
zaclimon said:
Hmm well I checked venturi and derteufel sources, no good. I'll check p1 and Crespo later.
Hey guys I'm considering this, would you like to get TWRP instead of CWM as far as the recovery solution goes?
Envoyé depuis mon Nexus 7 avec Tapatalk
Click to expand...
Click to collapse
make a poll on the thread
but yes, definitely
zaclimon said:
Hey guys I'm considering this, would you like to get TWRP instead of CWM as far as the recovery solution goes?
Click to expand...
Click to collapse
I have TWRP on my Galaxy S4 and comparing it to CWM on my Player (and even the original CWM on my ancient s3c6410 devices), they all do what they need to do about the same. So it really doesn't matter to me.
TWRP would be nice but it does not matter to me. I would like to see aroma file manager working.
Sent from my YP-G1 using Tapatalk 2
Ok I put up the pool in OP, as for aroma FM, I don't want to mess with including touchscreen drivers (I feel sometime too lazy I know )
Info & Thanks
What you need to know before you use this kernel.
This kernel got Selinux Permissive state as it supports more apps like TiTaniumbackup.
Reverting back to a Selinux enforced Kernel (stock) is no longer a problem from Rev3.0 and up.
You can set Selinux Status with the included Synapse app
You want to know why this kernel comes with Selinux included, google for Selinux and search your answers.
AllCast mirror will not work as this is a Samsung thing and not opensource.
If this is a problem for you, don't use this kernel.
DISCONTINUED , A NEW THREAD WILL BE OPENED FOR THE NEW KERNEL SUPPORTING ONLY THE KITKAT BOOTLOADER.
NO JELLYBEAN BOOLTOADER SUPPORT, IT IS TIME TO MOVE FORWARD.
INSTALLATION
Take a full nandroid backup.
NO NEED TO BE ON ANY KITKAT BOOTLOADER (your wifi will work with this kernel)
YOU NEED TO BE ON A KITKAT TOUCHWIZ ROM.
Install with cwm
Thanks:
sidmoraes for pointing me to other kernel source that I could use as base, still had to change some stuff but this is better then waiting for samsung to release there source, if they ever will. (Finally Samsung released source)
Andreilux - Faux123 - Yank555.lu for kernel work
ZaneZam for the zzmoove governor
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This kernel comes with the policy: IT IS AS IT IS.Use at your own risk
Take a Nandroid backup of your system and of your boot.img
You need to be on custom cwm to install this
ONLY FOR SAMSUNG TOUCHWIZ BASED KITKAT ROMS
Benchmark scores:
Stock Normal Note8.0 Antutu Ranking. 17708 points
My Antutu = 23486 points
Stock Quadrant ranking = 6613 points
My Quadrant = 13685 points
CivZ-SphereKat-REV5.4-GT-N5110-5100/5120 And older versions.
Never install a kernel that is not for your device, it will cause a hard brick.
Stock kernels can be found in the SphereKat folder of your device
The only good app to control this Kernel is the included SYNAPSE appExample of what synapse looks like,THIS IS JUST A EXAMPLE.
SphereEngine KERNEL Features
If you change nothing these are the following Features/optimisations you get compared to Stock:
SELINUX protection included but set at Permissive = No problems wit apps like Paragon and Titainium.
SELinux control with Synapse
S-Pen Alignment fixed
Default Speeds 200MHz-1600MHz
Activating Saving power will result into 200MHz-1100MHz.
GPU Overclocking thanks ZaneZam / DerTeufel / AndreiLux
GPU settings are:
Step0 54MHz = new Idle step = when in browser mode and no gaming this low GPU speed will help save power
Step1 266MHz
Step2 350MHz
Step3 533MHz = new speed foe step3 for better performance in drawing
Step4 700MHz = New OC speed for the better gaming performance
GPU settings are not editable and hard set in the kernel
Init.d support
ARCH-Power enabled
DynamicFSYNC = Use Terminal command or Trickster Mod app. = enabled by default.
Memory Leak fixed
mmc cap erase disabled ( just as a precaution )
[*]IKCONFIG_PROC support
Driver support included in kernel:
NTFS_RW / FAT / FAT32 / EXFAT support
3Gusb Support (ppp widget)
CIFS / UFS / ISO9660 / UDF_FS / HF / HF_PLUS
Realtek RTL8192CU/RTL8188CU USB Wireless Network Adapter support
Ralink driver support : Ralink rt2500 (USB) / Ralink rt2501/rt73 (USB) / Ralink rt27xx/rt28xx/rt30xx(USB)/rt2800usb - Include support for rt33xx , rt35xx , rt53xx
Extra Drivers: MAC80211 / RTL8187 / EEPROM_93cx6 Support
Boeflla 1.6.0 Sound engine support
OTG Audio dock , Car dock support
[*]SideSync support
[*]Dynamic Samsung Hotplugging
Note on CIFS:
Example on what you enter, but your IP and share, if that wasn't clear. The option section is very important
Note on NTFS
You need to use Paragon!
You need to set your mount point yourself.
Example and recommended is:
Code:
/mnt/extSdCard/paragon
Advanced users support
OC & UV support for CPU
Max CPU speed is 1920MHz
Min CPU speed is 100MHz
Governors: Adaptive, Pegasusq (recommended), Performance, Ondemand, Interactive.
Schedulers: cfq, Noop, Deadline, Row, Sio, VR
Extra TCP wifi connection added: Westood, reno, htcp, vegas, veno.
Changelog:
07/Jun/2014 First Public release Rev2.0
08/Jun/2014 First Public release Rev2.1
[*]GPU step 5 included, now max it will go to 533MHz
[*]Auobrightness sensor fixes part2
[*]CPU sloop adjusted
[*]zzmoove profile nr8.
09/Jun/2014 First Public release Rev2.2
[*]Memory Leak fix cpu stats
[*]Memory Leak fix Kernel Ext4 & Power
[*]zzmoove profile nr6.
I recommend not to use Interactive and Powersave governor as they are buggy.
09/Jun/2014 First Public release Rev3.0
[*]Selinux included in the kernel as more security is better. This is the reason why I bumded to Rev3.0 to make a clear difference.
This kernel got Selinux Permissive state as it supports more apps like TiTaniumbackup.
Reverting back to a Selinux enforced Kernel (stock) is no longer a problem from Rev3.0 and up.
You can set Selinux Status with terminal command to ENFORCED with "setenforce 1". Or use a init.d script to have it on reboot also on ENFORCED.
You want to know why this kernel comes with Selinux included, google for Selinux and search your answers.
[*]Governors , powersave, userspace = Disabled as they are useless and buggy.
10/Jun/2014 Rev3.1 Released:
Ramdisk changes
Interactive set on all parameters as startup and default governor, this to prevent lockup of cores on boot.
Synapse SELinux status oprion, change to ENFORCED & PERMISSIVE , default is permissive
Small tweaks in kernel boot_up custom script.
12/Jun/2014 Rev3.2 Released:
Ramdisk changes
CPU freq rework to solve the hotplug problems
zzmoove and interactive removed = I strongly recomment pegasusq
Synapse Global voltage control added and some more info stuff
Github source updated
13/Jun/2014 Rev3.3 Released:
Ramdisk changes
Revert CPU freq rework to solve the hotplug problems
Compiled with Samsun Dynamic Hotplugging to resolve this problem
Synapse GPU info added
15/Jun/2014 Rev3.4 Released:
Bus_freq changes
A ton of missing driver commits for the KONA device added
Autobacklight 0.0 lux light problem fixed, no it works correctly even in a dark room
That is the problem working with a kernel that isn't for this device. You need to debug and add the stuff that is missing.
18/Jun/2014 Rev3.7 Released:
N5100 support added = no testers pm'd me so this is experimental
N5120 support added = no testers pm'd me so this is experimental
Ramdisk changes and github updated
20/Jun/2014 Rev3.8 Released:
Hotplug rework
Ramdisk changes for the s-pen
28/Jun/2014 Rev4.0 - 5110 Released: (support for the 5100 & 5120 will follow later)
Merged with official Samsung KK source = fixes all existing problems with wakelock and many other optimizations for our device
29/Jun/2014 Rev4.0 - support for the 5100 & 5120 added
Merged with official Samsung KK source = fixes all existing problems with wakelock and many other optimizations for our device
Github updated
02/Jul/2014 Rev4.1 - support for the 5110 , 5100 & 5120
Boeffla sound driver updated to 1.66
ZZMOOVE governor reactivated
06/Jul/2014 Rev4.2 - support for the 5110 , 5100 & 5120
Balanced the voltage settings
13/07/2014 Rev4.3 is released
DynamicFsync updated
IntelliHotplug introduced = replacement for the samsung hotplug driver. = Synapse controled
quad core stats for better performance
avg_running time for intelli hotplug support
Synapse settings backup/restore option
I/O advanced settings in Synapse.
Build.prop tweaks in Synapse
Network tweaks in Synapse
...............
15/07/2014 REV4.3_B released
[*]VPN - Reverse path filtering FIX = caused by wrong Synapse settings
[*]Synapse = Network settings changed to solve the vpn problem
16/07/2014 Rev5.0 is released
Dynamic Hotpluging enabled
Update governors
New source 5110NA commits added for the 5120LE
Music skipping problem solved (please use Pegasusq or interactive governor)
SideSync driver added and enabled
Ramdisk removed hotplug locks
Compiled on new toolchain arm-2010q1 from "code sourcery" as suggested by Samsung for the Note8.0 KitKat
...............
17/07/2014 Rev5.1 is released
Different setting for Dynamic Hotpluging, less agressive
Frandom added and enabled
CPU slope changed like on the JB kernel
Dirty writeback
Various performance tweaks
Toolchain arm-2010q1 from "code sourcery" uploaded for the people that want to compile it with this toolchain (look in the kernel folder) as suggested by Samsung for the Note8.0 KitKat
Github updated to Rev5.1
...............
24/08/2014 REV5.4 released
[*]Synapse settings updated
[*]Updated toolchain arm-2010q1(202) from "code sourcery"
[*]GPU Overclocking thanks ZaneZam / DerTeufel / AndreiLux
GPU settings are:
Step0 54MHz = new Idle step = when in browser mode and no gaming this low GPU speed will help save power
Step1 266MHz
Step2 350MHz
Step3 533MHz = new speed foe step3 for better performance in drawing
Step4 700MHz = New OC speed for the better gaming performance
GPU settings are not editable and hard set in the kernel
[*]Corrected CPU freq going above scaling_max thanks to Yank555.lu
Source
XDA:DevDB Information
SphereKat, Kernel for the Samsung Galaxy Note 8.0
Contributors
civato
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: Rev2.0 first public
Stable Release Date: 2014-06-07
Current Beta Version: Rev1.4 non public re
Beta Release Date: 2014-06-05
Created 2014-06-07
Last Updated 2014-09-16
Thank You very much!!!
I will try this kernel in order do fix the spen accuracy.
Doing a nandroid backup and trying.
I´ll let you now my experience.
Martín
It is almost perfect!!!
MartinBM said:
Thank You very much!!!
I will try this kernel in order do fix the spen accuracy.
Doing a nandroid backup and trying.
I´ll let you now my experience.
Martín
Click to expand...
Click to collapse
S-pen alignment is fixed in the kernel and rom so you need both to have 100% accuracy.
This kernel will fix it for 95%. The other 5% is in the roms framework.
#########################################################
Note to all users:
Don't be a lurker, hit thanks as it took plenty of hours to build this.
Samsung didn't release the kernel source (not yet) so a lot of debugging was needed to fix problems like the sensors not reporting correctly.
This is the only thing I ask, hit thanks if this helps you.
It is free and enjoy it.
#########################################
Edit:
About the lurkers,
Martin from this post isn't one as he is a donator and thanks hitter.
A example to you all.
I wanted that cleared out as I didn't want Martin to take that lurker thing personal.
civato said:
S-pen alignment is fixed in the kernel and rom so you need both to have 100% accuracy.
This kernel will fix it for 95%. The other 5% is in the roms framework.
Note to all users:
Don't be a lurker, hit thanks as it took plenty of hours to build this.
Samsung didn't release the kernel source (not yet) so a lot of debugging was needed to fix problems like the sensors not reporting correctly.
This is the only thing I ask, hit thanks if this helps you.
It is free and enjoy it.
Click to expand...
Click to collapse
Much appreciated adding dock & boeffla support. You are a super dev.. will test and report and thanks.
Just wanna say, this kernel supports Civato's FLEXNOTE rom WITHOUT kitkat bootloader and still get wifi. [emoji106]
Sent from my GT-N5110 using Tapatalk
androidmonsta said:
Just wanna say, this kernel supports Civato's FLEXNOTE rom WITHOUT kitkat bootloader and still get wifi. [emoji106]
Sent from my GT-N5110 using Tapatalk
Click to expand...
Click to collapse
Damn... if only I had waited.
THANK YOU CIVATO!!! What is arch-power?
androidmonsta said:
Just wanna say, this kernel supports Civato's FLEXNOTE rom WITHOUT kitkat bootloader and still get wifi.
Sent from my GT-N5110 using Tapatalk
Click to expand...
Click to collapse
Oh I didn't know that, well that is a good thing, I will add this in my OP.
civato said:
Oh I didn't know that, well that is a good thing, I will add this in my OP.
Click to expand...
Click to collapse
Yup, I'm running FLEXNOTE 1.3 with 4.2.2 bootloader using this kernel. Did a full wipe in Philz using the "I want to install new rom" option.
Sent from my GT-N5110 using Tapatalk
Rev2.1 released
08/Jun/2014 First Public release Rev2.1
[*]GPU step 5 included, now max it will go to 533MHz
[*]Auobrightness sensor fixes part2
[*]CPU sloop adjusted
zzmoove profile nr8.
GPU control is not possible , maybe later as the GPU driver is totally different then on JB.
androidmonsta said:
Just wanna say, this kernel supports Civato's FLEXNOTE rom WITHOUT kitkat bootloader and still get wifi. [emoji106]
Sent from my GT-N5110 using Tapatalk
Click to expand...
Click to collapse
I confirm. Wifi working great. Thanks
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Flashed and while it seems to be working fine for the most part, my CPU is constantly maxed out for some reason. I changed no settings or anything, and it was idling fine before flashing. I'm sure it might be something with my device, but I thought I'd put it out there just in case it's not. I'm going to mess around with some settings, see what I can do, and see if it changes.
ArobeeTV said:
Flashed and while it seems to be working fine for the most part, my CPU is constantly maxed out for some reason. I changed no settings or anything, and it was idling fine before flashing. I'm sure it might be something with my device, but I thought I'd put it out there just in case it's not. I'm going to mess around with some settings, see what I can do, and see if it changes.
Click to expand...
Click to collapse
Like you said, it could be something with your device, mine goes into deep sleep and it has gone as high as 90% deep sleep. Pretty amazing I would say and great job by @civato. Are you on pegasusq governor?
cbrinnny said:
Like you said, it could be something with your device, mine goes into deep sleep and it has gone as high as 90% deep sleep. Pretty amazing I would say and great job by @civato. Are you on pegasusq governor?
Click to expand...
Click to collapse
I was indeed using pegasusq. After trying multiple different governors and nothing changing (even stayed at 1600mhz on powersaving), I've decided to wipe my device entirely and start from scratch. No biggie. If I narrow it down to a specific app or device setting that was causing it, I'll post it so people are aware.
09/Jun/2014 First Public release Rev2.2
[*]Memory Leak fix cpu stats
[*]Memory Leak fix Kernel Ext4 & Power
zzmoove profile nr6.
I recommend not to use Powersave governor as is very buggy. Next release will it have removed as it useless.
Best governors are Pegasusq - Adaptive and zzmoove.
I am running it an am happy to report no issues. The only changes I made were to up my top cpu speed to 1.8gzh. All govs are at default. Thanks again. Can't wait to see what is next in the works for this tablet.
Sent from my GT-N5110 using XDA Premium HD app
Scores
With my rom & kernel
Benchmark scores:
Stock Normal Note8.0 Antutu Ranking. 17708 points
My Antutu = 23486 points
Stock Quadrant ranking = 6613 points
My Quadrant = 13685 points
Running with rom v1.3 and civz kitkat bootloader. Is data wipe needed? Sorry for the stupid question.
Sent from my GT-N5110 using XDA Premium 4 mobile app
slushbilly said:
Running with rom v1.3 and civz kitkat bootloader. Is data wipe needed? Sorry for the stupid question.
Sent from my GT-N5110 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Not needed, me as a habit always wipe cache and dalvik.
Sent from my GT-N5110 using Tapatalk
Hi androidmonsta, How did you get Nandroid added under your Backup Settings? I assume it is part of the FLEXNOTE rom. What app does this link to?
rjamer said:
Hi androidmonsta, How did you get Nandroid added under your Backup Settings? I assume it is part of the FLEXNOTE rom. What app does this link to?
Click to expand...
Click to collapse
It comes from the rom. Its an backup app. Never use before LOL.
Sent from my GT-N5110 using Tapatalk
Code:
Disclaimer
#include
*
* [B]Your warranty is now void.[/B]
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Welcome to hadesKernel
Some personal thoughts:
- this kernel works only on J5 2015 versions. I`m not responsable for what can happen if you flash on other devices.
- v2.3 for J5 already includes all the previous things from A5 releases.
- if you take any of my work without my permission i'll report you, and you'll probably get banned.
- you should read at least install instructions stated in this post - i won`t offer support for any issues regarding installation;
- bug reports without device variant and logs can't be considered bugs - make sure you provide detailed info when reporting bugs;
- press 'Thanks' button instead of saying it - it will keep the thread clean and keep me motivated to do more;
- feel free to donate to me if you want to support my work.
Features:
Aroma Installer with root options
SuperSU 2.79 SR3
Magisk v12.0
OTG support enabled
Private mode (for roms that support that feature)
knox 0x0 - borrowed some things from magisk and from @Bulgaricus
CPU overclock to 1.5Ghz
GPU overclock to 720Mhz
J500HXXU2BPK4 update - December security patches
Adreno Idler
intelli_thermal
nvidia relaxation patch
undervolt
Color calibration
prima wlan driver
fast, stable and cool
Latest ramdisk
Permissive kernel
init.d support
maybe more - will update when remember...
Devices:
J500F
J500FN
J500G
J500M
J500H
Bugs:
None (see FAQ on #3 post for any issues)
Instructions:
make sure you have TWRP from here installed (or any other with Aroma Installer support)
download zip and put it into phone's storage
enter TWRP recovery
flash zip
reboot and enjoy
Downloads
Credits:
*DjSteve
*Lord Boeffla
*psndna88
*Bulgaricus
*SuperR
*Faux123
*duki994
*kernel testers
*if i missed someone PM me and i`ll add
XDA:DevDB Information
hadesKernel v2.5, Kernel for the Samsung Galaxy J5
Contributors
corsicanu
Source Code: https://github.com/corsicanu/hadesKernel
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: v2.5
Beta Release Date: 2017-04-26
Created 2017-02-21
Last Updated 2017-07-03
Reserved
Changelog:
v2.5R - 06.06.2017
fixed private mode for roms that support this feature
v2.5 - 26.04.2017
fixed heating on A500G
fixed wifi
re-fixed camera for J5 family
added i/o schedulers back
v2.4 - 25.04.2017
kernel built permissive to avoid some issues
updated ramdisk to latest official fw
added root options in Aroma
added Magisk as root option
removed charging limit for some devices
disabled modules unload
reworked modules implementation,
*now you can switch to any other kernel without wifi or FM Radio issues
reworked knox 0x0 script
revert update to linux 3.10.60 for now
revert add more governors for now
revert add hotplugs for now
revert add i/o schedulers for now
v2.3 - 05.04.2017
fixed camera focus for J series
added support for A500W and A500K
updated to linux 3.10.60
added more governors (alucard/lionfish/barry_allen/intelliactive - these can be unstable-use interactive if you have issues)
added hotplugs (intelliplug/bricked hotplug/alucard/msm_hotplug)
added i/o schedulers (vr/fiops/sioplus/zen) and set FIOPS as default
knox 0x0 - borrowed some things from magisk and from @Bulgaricus
updated powersuspend
ramdisk tune-ups
cpufreq tune-ups
memory/cache tune-ups
v2.2 - 20.02.2017
added support for J5 2015 (J500xx)
added usb fast charge
made cubic tcp default for better net speeds
disabled software CRC for better performance
optimized framebuffer for better performance
added regulator for overclock
undervolted for better battery
lowered safe frequency from 400 to 200mhz
A5S deepsleep fix
added nvidia relaxation patch for better battery
enhance power efficiency
implement fast idling of CPU
reduced high-load and average-load for better battery
enabled arch_power
lowered throttle threeshold and enable it by default
v2.1 - 10.02.2017
Fix FM Radio
Fix OTG for all versions
Fix overheating issues for G
Add support for A3FU
Add SuperSU-v2.79-SR3
v2.0 - 25.01.2017
J500HXXU2BPK4 update - December security patches
Add support for A500H/A500S versions
Add builtin wlan module
Add westwood tcp and make cubic default again
Adreno Idler 1.1, fixed msm_adreno_tz
Add powersuspend
More msm-thermal tweaks
kernel: reduce overheat
Enable multi-core power savings
Add SuperSU SR5 back
Fix Deepsleep for F/G/M
Add 50Mhz and 100Mhz frequencies for low consumption when awake (AOD)
Add dynamic sync 2.0
Add lcd notify
xz: Optimize Sfck Compression
Added Aroma Installer
v1.4 - 22.12.2016
Fixed wifi again for each version
Multitask and battery optimisations + permissive mode enabled
Fix for frequencies not sticking at boot
ramdisk cpu / io / battery tune-ups
Add specific ramdisk for each supported variants
Separate SU from ramdisk
Fixed Kcal (color calibration)
V1.3 - 15.12.2016
add KCAL driver
4sysctl: favor filesystem
GPU OC to 720Mhz
Reverted CPU OC to 1.5Ghz
Fixed wifi for A500G
V1.2 - 11.11.2016
A500FU SuperSU SR3 patch + init.d support
SuperSU SR3 patch + init.d support
Experimental wifi fix
A500FU support
Switch to CUBIC TCP congestion control
arch/arm : compile with hardfloat + neon-vfpv4"
Tune-up for Cortex A53/ARMv8 architecture
V1.0 - 08.11.2016 - initial release
A500GXXU1CPH4 update
OTG and permissive enabling
free-mem optimisations
added SU patched ramdisk
2.07Ghz CPU OC
Enable neon and VFPv3
enable xz compression
Reserved
FAQ:
Q: My wifi is broken after flash. What to do?
A: Flash latest modem available for your device.
Q: Can`t connect to wifi network. What to do?
A: Reboot the phone, reboot the wifi router/ap, make sure you don`t have mac filtering enabled on ap/router.
Q: MAC adress has changed. What to do?
A: There is nothing you can do. That happens because of newer wifi module, built along with kernel, from the latest sources. If you can`t connect see Q2 above. I won`t change back to legacy wifi modules, at least not now.
Q: Device appears as "unauthorized" in adb and notification to authorize doesn`t appear. What to do?
A: Enter developer options, disable usb debugging, wait 30 seconds and re-enable it. Now you should see the notification to allow debugging.
Q: loading
A: loading
One more just in case of need
Deleted.
#Henkate said:
It's nice to see you here.
Click to expand...
Click to collapse
Multumesc!
Great .
Fast Kernel, Stable. (First really good kernel for J5)
From the tester to this build your kernel has worked perfectly. (Commenting here your tester)
My new rom with your kernel is amazing.
Cheers! :highfive:
Thanks @corsicanu ..
I'm using this kernel on my Stock 6.0.1 rom & I must say that this is one of the best kernels for J5.. Its very fast & stable..
Thank You So Much..
---------- Post added at 09:04 AM ---------- Previous post was at 08:59 AM ----------
By Zonik said:
Great .
Fast Kernel, Stable. (First really good kernel for J5)
From the tester to this build your kernel has worked perfectly. (Commenting here your tester)
My new rom with your kernel is amazing.
Cheers! :highfive:
Click to expand...
Click to collapse
Hi @By Zonik ..
Waiting for your rom (v2) bro..
Some q's
Fast charge as in fast charge?? Does our present kernels support that, beacause it's pretty slow.
Any plans to follow it up for a non touchwiz based rom??
does it support skies rom beta ??
corsicanu said:
One more just in case of need
Click to expand...
Click to collapse
Does the kernel work well with a single processor at the frequency of 50Mhz?
If you set a different GPU frequency to 720Mhz when the GPU is at 100%, is the Max frequency set or rising to 720 ignoring the set frequency? ?
Finally something interesting for the lands of the J5
For me the link doesnt work i just get this:
YuZaGa said:
Fast charge as in fast charge?? Does our present kernels support that, beacause it's pretty slow.
Any plans to follow it up for a non touchwiz based rom??
Click to expand...
Click to collapse
I will quote my friend @Bulgaricus for this
...we force supporting devices such as laptops and desktops that have fast charge to provide the quick charger to our phone.
I will see what can be done in the future for non touchwiz.
Super.Mody said:
does it support skies rom beta ??
Click to expand...
Click to collapse
From what i know Skies Rom is based on touchwiz so it will work. Test and report.
paulo boë said:
For me the link doesnt work i just get this:
Click to expand...
Click to collapse
Just wait more or refresh the page.
Demicro said:
Does the kernel work well with a single processor at the frequency of 50Mhz?
If you set a different GPU frequency to 720Mhz when the GPU is at 100%, is the Max frequency set or rising to 720 ignoring the set frequency? ?
Finally something interesting for the lands of the J5
Click to expand...
Click to collapse
I added 50Mhz for some certain scenarios, to step down the freq if the load is small - screen on but idle (i have screen timeout set to 10mins), or screen off and awake (for AOD on the roms that have it-my rom for A5). Anyway i have custom script in ramdisk that bypasses stock init.qcom.post_boot.sh and sets custom loads for all the frequencies, so the device can go down even to 50Mhz, but step up if the load is reached, so it doesn't lag at all.
About gpu - from what i saw it sticks to maximum set (i use kernel adiutor).
I mostly cherry-picked features and fixes, even from your j5(6) kernel [emoji16] since all are based on same soc. This project started as personal kernel, permissive with otg enabled (because A series has OTG disabled by Samsung), and after that decided to add more things and make it public.
Cheers!
Sent from my SM-N930F using Tapatalk
OMG ITS SO SMOOOOOOTTHHHHH. I bearly have any lag:laugh::victory:
Demicro said:
Does the kernel work well with a single processor at the frequency of 50Mhz?
If you set a different GPU frequency to 720Mhz when the GPU is at 100%, is the Max frequency set or rising to 720 ignoring the set frequency? ?
Finally something interesting for the lands of the J5
Click to expand...
Click to collapse
corsicanu said:
About gpu - from what i saw it sticks to maximum set (i use kernel adiutor).
Sent from my SM-N930F using Tapatalk
Click to expand...
Click to collapse
You can see the GPU frequency in real time by using these commands in Terminal (PC):
Code:
adb shell
cd /sys/devices/soc.0/1c00000.qcom,kgsl-3d0/devfreq/1c00000.qcom,kgsl-3d0
while true; do cat trans_stat; busybox sleep 0.1; done
1) The path may be different.
2) The current GPU frequency is the one with the asterisk.
3) Total transictions means the total switches between GPU frequencies.
Try these commands to confirm that the GPU frequency is stuck at 720.
We can bring the current fast charging also on custom roms or even improve the fast charging to support custom mAh and stuff like that. But forcing a battery to charge faster than it's limit can demage and reduce the battery life drastically so I think we will leave it just like that. Greetings
corsicanu said:
From what i know Skies Rom is based on touchwiz so it will work. Test and report.
Click to expand...
Click to collapse
Skies Rom beta is a Note 7 Port rom .. so it is Grace UX not touchwiz ..
corsicanu said:
I will quote my friend @Bulgaricus for this
...we force supporting devices such as laptops and desktops that have fast charge to provide the quick charger to our phone.
I will see what can be done in the future for non touchwiz.
From what i know Skies Rom is based on touchwiz so it will work. Test and report.
Just wait more or refresh the page.
I added 50Mhz for some certain scenarios, to step down the freq if the load is small - screen on but idle (i have screen timeout set to 10mins), or screen off and awake (for AOD on the roms that have it-my rom for A5). Anyway i have custom script in ramdisk that bypasses stock init.qcom.post_boot.sh and sets custom loads for all the frequencies, so the device can go down even to 50Mhz, but step up if the load is reached, so it doesn't lag at all.
About gpu - from what i saw it sticks to maximum set (i use kernel adiutor).
I mostly cherry-picked features and fixes, even from your j5(6) kernel [emoji16] since all are based on same soc. This project started as personal kernel, permissive with otg enabled (because A series has OTG disabled by Samsung), and after that decided to add more things and make it public.
Click to expand...
Click to collapse
I know, that you have cherry pick from me?
I also found something interesting in your code
Referring to the intelli thermal, I do not know why faux124 used a different thermal control for the TSEN8974. I found that version 1 gives some errors in the logcat when I boot up the phone
I also started my kernel for personal use, specifically to be able to use viper4 ? I just needed the kernel to be permissive. And now look where the kernel go
Super.Mody said:
Skies Rom beta is a Note 7 Port rom .. so it is Grace UX not touchwiz ..
Click to expand...
Click to collapse
Grace UX is touchwiz based. Non tw roms are lineage, cyanogenmod, or any other that uses AOSP as base.
Sent from my SM-N930F using Tapatalk
Demicro said:
I know, that you have cherry pick from me?
I also found something interesting in your code
Referring to the intelli thermal, I do not know why faux124 used a different thermal control for the TSEN8974. I found that version 1 gives some errors in the logcat when I boot up the phone
I also started my kernel for personal use, specifically to be able to use viper4 ? I just needed the kernel to be permissive. And now look where the kernel go
Click to expand...
Click to collapse
I removed it from features/changelog since isn`t activated yet. I saw too late in msm8916 defconfig the CONFIG_THERMAL_MONITOR=y so the intelli_thermal isn`t there yet. I can`t even finish the build (lots of errors), and you have errors in logcat ?. You are way far than me. For now i didn`t had time to chase those errors. I`ll look more maybe next week. Anything else interesting in my source? ?
Cheers!