WARNING : I have no time to translate to English so i use google to translate please translate it if you can !
Hello,
Today I would like to introduce to you a set of tools dedicated to Sony Xperia SP. Many of these features are essential to optimize your loved cricket, and hopefully this time I will be back with sony many contributions to her son: D
1. Version:
+ V1.0: The trial version first.
2. The function:
+ Root
+ Unlock BL
+ Backup TA (very important before Unlock BL)
+ Install CWM
3. Instructions to use:
- Download and install PC Companion: http://www.sonymobile.com/vn/tools/pc-companion/
- Connect your phone to the computer.
- Open PC Companion and click on the Start button to load the driver as the adb for the SP!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Disconnect the phone cable from the computer.
- Download and install FlashTool:
http://d-h.st/Kb8
Click to expand...
Click to collapse
- Download and extract tool Xperia SP Tool Kit:
http://www.mediafire.com/?h3cixdcihd2hy37
Click to expand...
Click to collapse
- Run the file disable_driver_signing.bat to disable security when installing drivers on Windows 8, Windows 7 does not need offline. Your PC will restart.
- Go to the directory you installed earlier FlashTool (usually C: \ FlashTool \ drivers) run Flashtool-drivers.exe and select flashmode and Drivers Fastboot Drivers to install!
- Run FlashTool up and thunder click> choose to flashmode and click OK> Click the button ... select the path to the folder Xperia_Tool_Kit> Firmware you will see the same two lines appear, choose which is Version is 12.0.A.1.257 and press Flash button.
- Turn the phone off, hold volume - and plug the cable into the computer. FlashTool to flash the kernel to the machine!
- Run as Administrator XperiaSP_ToolKit.exe up, by right clicking on the tool select Run as Administrator (if using Windows 7/8)
Enable USB debugging on your device in Developer options!
On Unknow sources of Security on the phone!
Click to expand...
Click to collapse
- Tool will automatically identify your computer and is up 5 choices.
- Select the number 1 is the Root to Root machine. If rooting fail please run it again !
- After rooting complete continue flash use flashtool as above but choose the kernel is Version is 12.0.A.2.245.
- Turn on your phone.
Next is the most important part is the Backup TA. Before you unlock your phone, you are advised to take back up later TA warranty or goes back to relock without losing DRM keys
Click to expand...
Click to collapse
- Select option 2 to backup or restore the TA. When backup or restore your noticed the phone screen will light up your screen and click unlock agree when asked root.
- Choose the third option to Unlock Bootloader. You will be prompted for the unlock sequence was taken from Sony. The phone will automatically into fastboot and do things: D
- Select option 4 to install CWM (install new bootloader unlock type). The phone will automatically into fastboot and do things: D
*PS: Guide to root plant is due to its complex root guide for computers running the latest firmware 12.0.A.2.245. The older firmware, you can skip two steps before and after flash kernel root!
** Tool have used a combination of tools such as Root and Backup TA DoomLord of DevShaft
================================================== =====
Link download the latest firmware Stock Xperia SP:
https://docs.google.com/uc?id=0BwIPr1kDYTctakx1RmNxVDBVd3M&export=download
Click to expand...
Click to collapse
Over 120 views but no one comment ?
Hi, thanks you for this tool kit.
It works fine for the moment for me, I try a backup TA and it works
I'll try the others options later. Good job :good:
Anyone can help me translate all #1 in english please ? i use google so may be not correct in here !
The English is fine.
Sent from my C5303 using xda app-developers app
haha good job ^^ do you try it ?
link is dead for flash tool
Done link fixed !
I successfully completed most steps until:
"Choose the third option to Unlock Bootloader. You will be prompted for the unlock sequence was taken from Sony. The phone will automatically into fastboot and do things"
On Toolkit I get:
Please enter an unlock code: (I press enter)
Rebooting to fastboot
Unlocking... (phone reboots)
< waiting for device >
and nothing... My laptop detects the phone as normal, but Toolkit does nothing, just says < waiting for device >
Also, even though it said rooting was successful, the root checker apps say my phone is not rooted...
Ypnos said:
I successfully completed most steps until:
"Choose the third option to Unlock Bootloader. You will be prompted for the unlock sequence was taken from Sony. The phone will automatically into fastboot and do things"
On Toolkit I get:
Please enter an unlock code: (I press enter)
Rebooting to fastboot
Unlocking... (phone reboots)
< waiting for device >
and nothing... My laptop detects the phone as normal, but Toolkit does nothing, just says < waiting for device >
Click to expand...
Click to collapse
What's is your unlock code ? you have to enter your unlock code here to unlock your phone ! Not enter without any code !
If you root fail after flash kernel 1.257 please root it again it's work
quangnhut123 said:
What's is your unlock code ? you have to enter your unlock code here to unlock your phone ! Not enter without any code !
If you root fail after flash kernel 1.257 please root it again it's work
Click to expand...
Click to collapse
I don't have an unlock code...
Just go to sony website to got an unlock code !
Does unlocking bootloader erase the internal memory?
Sent from my C5303 using xda app-developers app
Yes it's does so you have to backup internal storage first !
quangnhut123 said:
Just go to sony website to got an unlock code !
Click to expand...
Click to collapse
A google search doesn't give any hits for unlock codes on the official sony website...
Ypnos said:
A google search doesn't give any hits for unlock codes on the official sony website...
Click to expand...
Click to collapse
http://unlockbootloader.sonymobile.com/instructions
how to backup TA on 2.254 kernel
Hi, Thanks you again for this tool.
I successfully backup TA and unlock my bootloader easily with your tool
Good Job :good:
thanks for this handy tool. it helped alot in installing CWM for unlocked bootloaders.
edit: cwm has some problems mounting sd card when doing a backup to external sd card. anyone facing this issue ?
Related
So its time to have some fun flashing your phone.Rooting means getting acess to the Root of the Phone Rom.Once rooted you can install Custom Roms [Operating Systems],Remove Crappy apps, get better performance and Battery etc. Rooting your phone is Not Big job ,But a Bit lengthy at the first time..But you will end up in trouble if you dont know the actual procedure.That doesn't mean you will brick your phone.Android phones are based on Flash ROMs ,just like a memory card. So flashing a 100 or1000 times wont destroy it.It is completely Safe and there is nothing much to worry about .But make sure sure you have an un interrupted power supply if you are using a PC. So here i am taking effort to bring out a step by step description of the process.
Understanding what it is...
Many people still doesn't know what actually is rooting and a custom rom mean. The Process is to completely Remove your Current Phone OS and Install a Fresh copy of another OS. If you have installed a windows /Linux formatting your pc its easy to understand.Your device has a 440MB flash memory for OS and 420 Mb Internal memory for installing apps etc.When the phone comes to you not the entire memory of 420 Mb is available to u ,because sony has included some stock Bolt wares in ur OS.So rooting provides a larger internal memory as well .In your pc you might have come across the bootloader /boot menu .In your sony phone this boot-loader is Locked to prevent alterations. But android being an opensource stuff , it is required that the phone manufacturer should allow you to install Custom androids. So in order to access the Boot-loader u will have to unlock it first. After unlocking a recovery Mode is to be installed.That's what u call kernelling. After that , u will wipe the User memory 420mb ,Format[Done auto] & install the Zip file containing android os onto the 440Mb memory.The zip file contains the Customized android OS.Its called the rom .MiUi is one such rom.
Benefits: Lots of Customization , More features ,Better battery ,A faster OS,Latest Android versions.
Negatives: Voids warranty .
Why it voids warranty ?
Simply because Sony cant take up the responsibility if you destroy your phone hardware by your mistake. For example if u overclock [Possible only after rooting] the CPU there are chances that it smokes out.
Warning : Unlocking Boot loader voids Sony Service Center warranty.
Rooting involves 3 steps,
1-Unlocking Bootloader
2-Installing a Custom Bootloader /Kernel/Recovery
3-Installing the Rom /Android OS.
Tools Required [Download all of them before starting ]
1.Sony Xperia Flashtool *[Optional]
2.Drivers
3.android_winusb.inf Driver[Click to Download]
4.ROM & Kernel (Once downloaded , Copy the Rom File to the Micro SD[Important, if u don't wanna end up searching for a card reader ] )
OR
ROM-2 [Lasans's MiUi ] ( If u find any issues with the other one Try this Rom,Download only the Rom File )
*Actually you do not need the Complete Xperia flasher tool. you are only using the Fastboot from Xperia flasher. If u don't have time to download the Flash tool just download only the Fastboot tool and Drivers from HERE or Here .But its better to download Flash tool as u can perform some additional operations like Installing apks , Uninstalling features etc . using the tool.
Step 1 : Unlocking the Bootloader
1. Unlocking the Bootloader requires the Unlock Code.You can get it from the sony website at the Following link .
http://unlockbootloader.sonymobile.com/
Enter your Phone IMEI ,Email etc. and Get the unlock Code.While you enter the IMEI take care not to Include the last DIGIT of your IMEI.IMEI should be 14 digits long.
2. Now Install the SONY Xperia Flash tool from Here
http://androxyde.github.com/ OR JUST UNZIP THE FASTBOOT.ZIP TO C:\
3. You will need fastboot on the computer to unlock the bootloader of the Sony Ericsson Live with Walkman . Fastboot is available in Xperia Flashtool folder in C:\Flashtool or where you have installed Flash tool OR IN C:\ WHERE U HAVE UNZIPPED IT TO.
4. Now Power off your Sony Ericsson Live with Walkman.
5. Press & hold the Volume Up button while connecting the Sony Ericsson Live with Walkman to the computer.The Notification LED will now glow in Blue color.This is called Fastboot Mode.
[ Press and Hold Vol Down key while connecting to USB will Boot in Flash Mode ]
6. If the drivers are not installed automatically ,go to the Drivers folder in Xperia flash tool folder and install the drivers.You can check if the drivers are properly installed by going to the windows device manager and see if there is any Unidentified device .If properly installed it will shown in device manager.If u find an entry "s1 boot fastboot " with Missing drivers in device manager ,Right Click there -> Update Driver ->Browse My computer ->Let me Pick -> Have Disk >> Then Point to the Downloaded "android_winusb.inf" file. >> Choose "Android Bootloader device".Now your drivers Should be installed.In the device manager You will find an Android device.
7. Go to Terminal or Command prompt in windows and change directory to "C:\Flashtool\x10flasher_lib" .You will find the fastboot.exe file there.
See the Image attached at Bottom of this page .
Enter following commands to navigate
cd\
cd flashtool\x10flasher_lib or cd fastboot
Now you are int the folder containing fastboot.exe
8. Now check if the phone is properly connceted and detected by Typing the following in the cmd .
fastboot -i 0x0fce getvar version .It must return the version of fastboot .Eg: .3
If it shows "Waiting for device" the device is not connected properly.If it returns anything else [ like .3 ] the device is detected .
9. Now type the Following and press ENTER
fastboot -i 0x0fce oem unlock 0xKEY
where KEY should be replaced by the Unlock key you generated from the Sonymobile website .
10. Once it display Flash operation complete , you are Done .Your phone Bootloader is no more locked.
PS:If you find any problems using this method you may follow one these links.
http://unlockbootloader.sonymobile.com/instructions
http://forum.xda-developers.com/showthread.php?t=1560613
Step 2 : Installing the Kernel
Android is based on the Linux kernel.A kernel is actually a link between the OS and the hardware.It controls the hardware.So obviously it has got something to do with the performance & battery life. The kernels contain the RECOVERY MODE+ROOTING. You may read more about kernels on xda-developers.com .So there are a number of kernels available for Sony live . You may find it in the rom download pages usually.
Two of the popular kernels are
1. X-Kernel
2. Rage kernel
Download one of these kernels, a ROM file and flash your phone.
Here we are working with the Expeacers MiUi Rom.
Steps
1. Once you are done with Unlocking Rest is So easy .Do not disconnect the phone .We are going to use the phone in Fast boot mode. If u have disconnected ,don't worry ,just shut down [Or pullout & Re-insert the battery ]the device and Reconnect it to PC Holding the Vol+ key pressed.Now the notification led will turn Blue.You are back in fast boot mode.
2. Copy the Downloaded kernel img file into the folder where fast boot is located and rename it to "Boot.img" .
3. Now go to Command prompt , Navigate to the x10flasher_lib[As done before ] ,Enter the following command.
fastboot flash boot boot.img or
if it doesn't do anything
fastboot -i 0xfce flash boot boot.img
4. Now you are done ."Flash operation complete " will be displayed. Disconnect your phone from PC.
Before you proceed to next step you should have copied the ROM[Zip file ] to your Memory card in the phone.
Step 3 : Installing the ROM
This is the easiest part.Just turn on your phone ,after a few 5-10 seconds the notification led will glow .
At this time Press the vol+ key once. Phone will enter the Boot loader . Now you can see a number of option.Use the Vol+/- key to navigate ,Home key to select . Choose the wipe Cache ,Wipe Rom/factory Reset options[in some boot loaders ] .This is important as this will clean up all the previous user data and installed apps. Wipe actually cleans the internal memory and Cache. This is called clean install.
Now after cleaning up ,Choose the "Install Zip From SD Card" . Now follow the on screen instructions Rest is self explanatory. Once you finish installing the Rom Reboot the device. In most of the cases First time booting might be so long. All you have to do is be patient.If its taking longer than usual try pressing the Home key once.
So its time to Enjoy a new android... A yummy Ice cream Sandwich. Now you may try as many ROMs as u wish by simply following the step 3 only.
Happy Flashing... Enjoy ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Combined Unlocking and Burning kernel .[Click Me For Full size ]
Burning Kernel [Step 2 ]
Unlocking Bootloader [Step 1]
Man, I think you've worked long time on that, but look at the sticked threads. There's my rooting guide and bootloader unlocking, yet. You tell the same again.
And in my signature there's how to install custom kernels/roms, in the pinned thread by someguyfromhell you can read the same...
Its k..
Dude .. I made it for my Blog...:angel::angel: .. :angel::angel:
Its not tailored for XDA. Posted it here just in case somebody find it usefull
Yeah, it could help somebody...
Sent from my GT-I9100 using xda premium
THANKS MAN IT HELPED ME AS IAM STILL A NOOB and i still stuck at few steps to un lock bootloader byt at last did it
thnQ
[ToolKit] OnePlus One Easy Toolkit By Scumpi : flash recovery & CM 11s Build & more
How to use OnePlus One Easy ToolKit By Scumpi ?
Warning: Note: No one but yourself is responsible for what you do to your device.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Introduction
Hello everybody ! I don't have the OnePlus One, so if something goes wrong, please, tell me, I'll try to resolve the potentials issues ! Any suggestion to make this toolkit better or any ideas are welcome !
With this Toolkit, you will be able to unlock your bootloader, install a firmware, or a custom recovery or simply boot in the custom recovery of your choice.
Requirements
A OnePlus One & ADB / fastboot drivers installed on your computer --> see HERE
Enabled USB debugging (On your phone go to Settings > About phone > Tap on Build number 7 times. This will enable Developer options. Now go back to Settings > Developer options > Enable USB debugging)
Download the following file
--> For assigns users a 64 GB OnePlusOne Easy Toolkit By Scumpi - 64 GB Users.zip
MD5 : 3716E77800F0B17365B7A6AF272E91E9
--> For assigns users a 16 GB OnePlusOneEasy Toolkit By Scumpi - 16 GB Users.zip
MD5 : 01091F52C51E2DAD64ACB9C0EF27C1B6
How to Use / first step
Download and extract this folder OnePlusOne Easy Toolkit By Scumpi - xxGB Users.zip (Feel free to rename it as you like if it makes you happy)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The first step consist to unlock the bootloader of your OnePlus One
Connect your phone to your PC via the USB cable (must be on)
Open the folder where you extracted the files and double click "Unlock Bootloader"
Confirm with the enter key to start the process and wait until the end of the unlocking process.
Before to flash the firmware, install or boot into a custom recovery (Philz recommended), and make a backup of your actually rom !!
How to Use / others possibilities
To perform another operation, do the same by choosing the desired action. Here is the list of others operations you can perform using the Easy OnePlus One ToolKit :
Double click on the desired file in the folder to launch the operation
Unlock Bootloader - Unlock the bootloader of your OnePlus One
Install CM 11s Build XNPH22R - Install the Official firmware CyanogenMod 11S
Install-TWRP 2.7.1.0 - Installs TWRP custom recovery v2.7.1.0
Install-TWRP-2.7.0.0 - Installs TWRP custom recovery v2.7.1.0
Install-Philz-recovery - Install the custom recovery Philz-recovery (Recommended)
Install-CWM - Install the custom recovery CWM
Install-Original-Recovery - Install the recovery Stock
Boot-TWRP 2.7.1.0 - Boot into TWRP custom recovery v2.7.1.0
Boot-TWRP-2.7.0.0 - Boot into TWRP custom recovery v2.7.1.0
Boot-Philz-recovery - Boot into the recovery Philz custom-recovery
Boot-Original-Recovery - Boot into the recovery Stock
Boot-CWM - Boot into the custom recovery CWM
Important before installing a recovery custom :
Go into "Settings" > "Developer options" and disable the "Update recovery with system updates" option.
After that, try the steps for installing a custom recovery again.
You will be able to boot your phone into you new custom recovery using the Vol down and Power buttons.
If you don't do that, when tou will turn off the phone and press Volume down and Power buttons you will enter in recovery stock.
Tips:
To find files faster in the folder, right click with the mouse, then 'Sort by' and select "Type"
Notes
For anyone having device not found problems follow this post. HERE
(Specifically the part under the picture)
You may have to manually install the driver twice like I did, once with the phone in regular mode and once in fastboot mode. It will show a little ! in device manager.
Thanks to @genardas for the tips.
Credits & Thanks
nexgen999
acer73
Dees_Troy
Chromium
French OPO users can go HERE
Reserved for me
why do you recommend to install philz recovery?
stop leak release and rename it !!
i have build this look that>
http://chinandroidphone.com/oneplus-one-review/
and tutorial here
http://chinandroidphone.com/cyanogenmod11s-install-oneplus-one/
copie paste are so easy
nexgen999 said:
stop leak release and rename it !!
i have build this look that>
http://chinandroidphone.com/oneplus-one-review/
and tutorial here
http://chinandroidphone.com/cyanogenmod11s-install-oneplus-one/
copie paste are so easy
Click to expand...
Click to collapse
It's not copy/paste because It's other and more different possibilities and not the same build into this toolkit...
I give you credit in first post to make you happy but don't say its copy/paste, because it's not true... And please don't quote the first post, its not good for visibility...
Tks
salespalace said:
why do you recommend to install philz recovery?
Click to expand...
Click to collapse
he recommande beaucause i his a leecher he inly look my post and my work !!
cwm and twrp have some backup and restore bug
nexgen999 said:
he recommande beaucause i his a leecher he inly look my post and my work !!
cwm and twrp have some backup and restore bug
Click to expand...
Click to collapse
Tks,
For your pleasure i've added you on credits & thanks :good:
your the best
Sorry I'm not so smart. Where is the phone rooted in the process? Thanks so much for your work!
Nice thanks for developing!
I hope i get my opo fast
stu5797 said:
Sorry I'm not so smart. Where is the phone rooted in the process? Thanks so much for your work!
Click to expand...
Click to collapse
There is not... Too root must install a recovery custom & flash this file http://download.chainfire.eu/420/SuperSU/UPDATE-SuperSU-v1.99.zip
Maybe I will add it at the toolkit if ive time
scumpicule said:
Reserved for me
Click to expand...
Click to collapse
trait-ar familia
ce baiat destept avem aici
Followed all your steps. keep getting device not found in the command prompt window. then it says waiting for device.
shaker2k said:
Followed all your steps. keep getting device not found in the command prompt window. then it says waiting for device.
Click to expand...
Click to collapse
Open a command promp and type adb kill-server & Try again. Or close the adb process
Are you properly install adb & fastboot driver?
Edit :
Hello
Someone to test a batch file for the root ? PM me if you want
Thanks @scumpicule ! Je testerai ca pour changer sur philz peut etre Tu arrive tard j'ai galèré une semaine a rooter mon One etc.. Mdr
@shaker2k
Still the "device not found" ?
@pro castinato
Better late than never Can you try the batch file for the root d'or me please?
Envoyé de mon GT-I9305 en utilisant Tapatalk
scumpicule said:
@shaker2k
Still the "device not found" ?
@pro castinato
Better late than never Can you try the batch file for the root d'or me please?
Envoyé de mon GT-I9305 en utilisant Tapatalk
Click to expand...
Click to collapse
I got it figured out I didn't know I had to manually put it in fast boot mode. Other toolkits I have used do that automatically. You might want to put that in the op.
shaker2k said:
I got it figured out I didn't know I had to manually put it in fast boot mode. Other toolkits I have used do that automatically. You might want to put that in the op.
Click to expand...
Click to collapse
Thanks
I"ll wait for other feedbacks because it works on my computer...
Edit :
And the comands via batch files works properly once you was in fastboot mod ?
scumpicule said:
Thanks
I"ll wait for other feedbacks because it works on my computer...
Edit :
And the comands via batch files works properly once you was in fastboot mod ?
Click to expand...
Click to collapse
Yes. once I manually put the phone in fast boot it worked like a charm.
For anyone having device not found problems follow this post. http://forum.xda-developers.com/showpost.php?p=53420414&postcount=2
(Specifically the part under the picture)
You may have to manually install the driver twice like I did, once with the phone in regular mode and once in fastboot mode. It will show a little ! in device manager.
I decided to create this thread in case I forgot the steps and also to share all of the things I know about Flashing ROM, Unlocking the Bootloader and Rooting SONY Ericsson XPERIA mini ST15i.
Credits and BIG THANKS to all developers who posted these threads for their creative works and guidance.
ORIGINAL THREADS:
[FIRMWARE][4.0.A.2.368][Mini][ST15i][Smultron] Official Firmware + ROOT solution — by DooMLoRD
Full Instructions for bootloader unlocking, flashing and rooting sk17i! — by droxperia
[TOOL] XperiFirm ~ Xperia Firmware Downloader [v4.7.2] — by IaguCool
SE Bootloader Unlocking v1.6 by quangnhut123 - Update 27/03/2012 — by quangnhut123
{Mini/MiniPro/Active/Live}[DEV][KitKat 4.4.4][CM11.0] LegacyXperia — by mikeioannina
NOTE: Some files and programs I linked here are Windows-based. So use a Windows PC if able. You can find and also download them from the ORIGINAL THREADS.
FLASHING
Okay, so let's begin with Flashing Firmware using Sony Mobile Flasher.
DOWNLOAD
Sony Mobile Flasher (Xperia Flash Tool) — by Androxyde
XperiFirm (Xperia Firmware) — by Igor Eisberg
NOTE: Microsoft .NET Framework 3.5 or later is required for XperiFirm to run. It is also advisable to use the latest versions of Xperia Flash Tool and XperiFirm.
DOWNLOADING FIRMWARE USING XPERIFIRM
Download, extract and run XperiFirm — by Igor Eisberg
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Select your device from the left pane
And choose the Firmware from the middle pane
Then click the Firmware's build number/release from the right pane to start downloading
Build 4.0.2.A.0.62 — Gingerbread
Build 4.1.B.0.587 — Ice Cream Sandwich
Once it's finished, go to the directory where you choose to save the Firmware
NOTE: If you found a file named fwinfo.xml, then delete it. It is not included when building the files.
Next step is decrypting and creating the files using Sony Mobile Flasher
Follow the steps under CREATING FIRMWARE below ↓ If you choose to unpack the Firmware before
And if you decide to unpack it later, then follow the steps under DECRYPTING FIRMWARE below ↓
DECRYPTING & CREATING FIRMWARE USING XPERIA FLASH TOOL
Download, install and run Xperia Flash Tool — by Androxyde
DECRYPTING FIRMWARE
Under the Tools > Bundles, click FILESET Decrypt
Browse for the folder where the Firmware is saved
Select all the files listed from the Available files
And click the right arrow button at the middle
Then click the Convert button to start decrypting
NOTE: You're also going to create it after decrypting so follow the next steps below ↓
CREATING FIRMWARE
Under the Tools > Bundles, click Create
Browse for the folder where the Firmware is saved
NOTE: There's no need to browse the Firmware after decrypting the files from before.
Select all the files listed from the Folder list
And click the right arrow button at the middle
Double click the text box under Device, then select the device from the given list.
Type the region of the Firmware under Branding
And type the build number/release of the Firmware under Version
Then click the Create button to start creating the Firmware
Next step is Flashing the Firmware to your device
Follow the next steps below ↓
FLASHING THE FIRMWARE
NOTE: You must install first the recommended drivers before you can Flash the Firmware to your device.
Go the Xperia Flash Tool directory
Open the folder drivers
Run and install the Flashtool-drivers.exe
Then proceed to the next steps
Run Xperia Flash Tool — by Androxyde
And click the Flash device button
Choose Flashmode
Then click OK
Select the Firmware you've downloaded and created earlier from the Firmware lists
Then click the Flash button
Plug-in your device in Flash mode by holding the volume down button
Once the flashing is done, you can now then unplug, power on and use your device
Click to expand...
Click to collapse
ROOTING
There's a lot of different ways on how to root your mini but here, we're only going to use a program called Cydia Impactor.
DOWNLOAD
Cydia Impactor
NOTE: You can also install your device's USB driver and even more using this tool.
ROOTING YOUR MINI USING CYDIA IMPACTOR
Download and extract Cydia Impactor
Run Impactor.exe
Plug-in your device to your PC with USB debugging enabled
Select # drop SuperSU su to /system/xbin/su
Then click the Start button to start rooting
AND THAT'S IT!
INSTALLING DEVICE'S USB DRIVER USING CYDIA IMPACTOR
Connect your device with USB debugging enabled
Under USB, click Driver Scan
Select your device from the list displayed
Then click the OK button
AND YOU'RE DONE
Click to expand...
Click to collapse
UNLOCKING
Unlock the Bootloader to install a Custom ROM and Recovery Image.
UNLOCKING THE BOOTLOADER
Go to this site unlockbootloader.sonyericsson.com to get your unlock code
Scroll down and select your device from the list below ↓
Then click Continue
Enter your email address, then click Submit
Check the verification email they've sent you for continuation
Next step is entering your device's IMEI
To get your device's IMEI, just dial *#06#
Code:
*#06#
Then they will give you the unlock code
DOWNLOAD
ADB (Android Debug Bridge)
NOTE: The file only includes the necessary things for unlocking the Bootloader.
STEPS:
Download and extract ADB to a specific folder
Open a command window from the ADB folder
Connect your device in fastboot mode by holding the volume up button
Type fastboot devices to check all devices currently connected in fastboot mode
And fastboot -i 0x0fce oem unlock 0xUNLOCK CODE to unlock the Bootloader
Code:
fastboot devices
fastboot -i 0x0fce oem unlock 0x[U]UNLOCK CODE[/U]
Unplug and power on your device
Dial *#*#7378423#*#* — Service menu
Then go to Service info > Configuration
And see the Rooting Status to check if the bootloader is unlocked
Code:
*#*#7378423#*#*
Click to expand...
Click to collapse
This project has been incorporated into another larger and multi-device: TOOL ALL IN ONE
I decided to create a fast and secure program to simplify modding on these watches. At this moment only the Amazfit Pace si supported, when there are more guide on Amazfit Stratos i will upgrade this tool. Remember to unlock your amazfit bootloader you always need of unlock code from https://unlockamazfit.com/
Huami AMAZFIT Tool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FUNCTIONS
Install Drivers;
Unlock Bootloader;
Install APKs;
Uninstall APKs;
Reboot Device;
Update the Tool to latest version;
Enable App List;
Set english as default language (Not available for Stratos);
Take screenshoots;
HOW TO INSTALL
Download .zip file;
Right click on zip and go in file properties;
Set "Unblock", then click on "Apply" and "OK" (If you don't see it continue the installation guide). Guide picture:
Extract all its contents into a folder;
Click on setup.exe;
Click on "Install";
Waiting for the end of the process;
Enjoy your tool
UPDATE
There will be no need to re-download the new tool, but just look for new updates directly from the tool.
In all cases I'll update the link in this thread and report it when there are new updates with its changelog. (If you have some problem during the update, press continue)
CHANGELOG
#1.0.1.1
Little fix in the new function "Flash Stock ROM".
#1.0.1.0
Added a new function "Flash Stock ROM", it will install a stock ROM on you smartwatch;
General Bugfix and Improvements.
#1.0.0.8
Solved a bug in the unlock bootloader option, now it works perfectly;
Added automatic check device when one device will be plugged in pc;
General BugFix and Improvements.
#1.0.0.7
Fixed English language setter, now it works perfectly;
Added version number in "Other Info";
Little Fix in APK Uninstaller.
#1.0.0.6
Fixed a little in bug in the screenshot file manager;
#1.0.0.5
Blocked "Set English Language" for Stratos;
General Bugfix and Improvements;
#1.0.0.4
Added AMAZFIT Stratos to official support;
Added new option to install Drivers;
New Screenshots functions: now you can take a screenshot and import it on your pc;
Added Other Info, here you can open this XDA thread, you can delete the downloaded Drivers and you can send me a mail;
Fixed Check Data options, now will check good data also for english version;
General Bugfix and Improvements.
#1.0.0.3
Fixed support model name (Added to auto recognizer "Amazfit Pace");
Fixed some buttons;
General BugFix and Improvements.
#1.0.0.2
Initial Release
CONTACTS
If you think it necessary to add new features please comments or send me a private message or send me an email to [email protected]. Please contact me if you see a bug
DOWNLOAD
Huami AMAZFIT Tool
( Alternative Link )
( Another Alternative Link )
Stock ROMs
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Will test it, thanks.
Do I have to enable app list to be able to install .apk's?
R-iel said:
Will test it, thanks.
Do I have to enable app list to be able to install .apk's?
Click to expand...
Click to collapse
It's not necessary, but if you install an apk you need of app list to open it on your amazfit
maybe consider creating an English installer?
edit:
and maybe a driver installation option ?
1immortal said:
maybe consider creating an English installer?
edit:
and maybe a driver installation option ?
Click to expand...
Click to collapse
In the next update you will see it:good:
Congratulation!
With this tool can I install watch droid?
Thanks
arp said:
Congratulation!
With this tool can I install watch droid?
Thanks
Click to expand...
Click to collapse
Download the apk you want to install and then you can install it through the APK Installer option in this tool
Big Thanks!
Can i re-lock bootloader ?
Thanks
boumboum said:
Big Thanks!
Can i re-lock bootloader ?
Thanks
Click to expand...
Click to collapse
At this moment i have not found a lock command that works, when i find it i will add an option to lock bootloader in the tool
I found your utility and now I want to use it to unlock my amazfit pace.
But when going to fastboot mode the watch gets into fastboot mode and windows tries to install a fastboot device (this does not get installed) and then your utility hangs.
I do have fastboot and adb installed , but adb = v1.0.32 and I do not how to find the version of fastboot.
When using fastboot on the commandline I can use it to reboot my phone when it is in fastboot mode. When I want to reboot the watch in fastboot mode the command also hangs.
So I guess this has something to do with versions of adb and/or fastboot.
Do I need a lower version because the watch runs on android 5.1?
If yes, what version do I need and how to uninstall the currents version of these tools.
Can anybody help me out?
deboopi2 said:
I found your utility and now I want to use it to unlock my amazfit pace.
But when going to fastboot mode the watch gets into fastboot mode and windows tries to install a fastboot device (this does not get installed) and then your utility hangs.
I do have fastboot and adb installed , but adb = v1.0.32 and I do not how to find the version of fastboot.
When using fastboot on the commandline I can use it to reboot my phone when it is in fastboot mode. When I want to reboot the watch in fastboot mode the command also hangs.
So I guess this has something to do with versions of adb and/or fastboot.
Do I need a lower version because the watch runs on android 5.1?
If yes, what version do I need and how to uninstall the currents version of these tools.
Can anybody help me out?
Click to expand...
Click to collapse
Have you tried to install drivers through the tool?
Yes, but it did not help.
I started all over on another pc and now I can continue.
Thanks
rom installation
Hi Mauro,
another great job, I love this kind of tools (I am already a user of your Toolkit for Oneplus 5 with satisfaction), regarding the amazfit pace I have unlocked the bootloader, I would like to ask you if is it possible install a rom with the tool.
Thanks
neolamp79 said:
Hi Mauro,
another great job, I love this kind of tools (I am already a user of your Toolkit for Oneplus 5 with satisfaction), regarding the amazfit pace I have unlocked the bootloader, I would like to ask you if is it possible install a rom with the tool.
Thanks
Click to expand...
Click to collapse
Thanks, at this moment you can't install a rom with a this tool, in the next update i think i will add a function to auto install the 2 stock rom for amazfit pace
Great..
Can i install apks without unlock bootloader?
Thanks..
dauzsalam said:
Can i install apks without unlock bootloader?
Thanks..
Click to expand...
Click to collapse
Yes you can.
Sent from my HTC 10 using Tapatalk
dauzsalam said:
Can i install apks without unlock bootloader?
Thanks..
Click to expand...
Click to collapse
Yes, you can
HELP!
Hello!
When I use your tool, and try to unlock the bootloader, I get this message:
Your phone is not properly relevated, please check if it is in fastboot
mode
Being a newbie, I am stuck here.
Please advice..
Regards
podgaard said:
Hello!
When I use your tool, and try to unlock the bootloader, I get this message:
Your phone is not properly relevated, please check if it is in fastboot
mode
Being a newbie, I am stuck here.
Please advice..
Regards
Click to expand...
Click to collapse
Have you installed drivers before try to unlock bootloader?
mauronofrio said:
Have you installed drivers before try to unlock bootloader?
Click to expand...
Click to collapse
Yes, I installed them from the app., and the watch is showing Fastboot on screen!.
I am perfom this Sorry for my english, I am from Ukraine
Download archive!
We unpack. Install the adb and mtk preloader drivers, if they are not installed, restart the computer.
In the smart, turn on the developers menu, in it - "Allow OEM unlock" and "USB debugging" and connect the smart to the computer.
We drop valuable photo data from the smart to the computer for any, and, without disconnecting the smart from the PC, run the script (with the phone connected to the PC and loaded into the android phone. Reboot_to_fastboot_getvar current-slot.bat (not from the admin, just click twice).
Smart will look like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
we allow - put a daw, ok. We are waiting for the smart to reboot into fastboot, when the barcode appears on the smart screen, before that we do not press anything in the script
I did the scripts step by step, after each operation in the script window, press enter to continue, and so on until each script is closed
We look at our current slot in the window and remember the letter - a or b:
In the script, press enter so that the smart reboots and the script closes.
Run flash_tool.exe, go to this tab and check the boxes, as in the screenshot:
So we consider the necessary versions of orig. files, so as not to download and sew a specific firmware version for this instruction.
(And best of all, all the checkboxes, except for system, vendor, userdata - they are not critical, if they are not removed, it will take up a lot of space on the computer up to +74 gb, but I did not put these checkboxes, there must be some risk and passion )
We press "Read Back" and only then we connect the switched off smart to the PC, we wait, at the end we disconnect the bodies, do not touch it: sveta:
Go to this tab, remove all checkboxes! And we only put on lk_ with the letter of a non-your slot that we looked at, for example, you had slot "a" - so we put a check on lk_b and vice versa :
Click "Download" and connect the switched off smart to the PC (it was already turned off: sveta
As it flashes, we close the USB flash drive window, disconnect and turn on the smart, after loading, we connect it to the PC again, we already run the script
Unlock_Moto_E6S.bat, wait until the body reboots into a fastboot (to the barcode on the screen) and only then press the input step by step to continue in the script until it is completely closed.
Everything, the bodies are unlocked. Now you can get an excellent and fast root from Magisk, try other firmware, unsubscribe which one is buggy, which one flies. I haven't tried yet. Now I will write how to flash orig. kernel with magisk root (attached magisk boot for xt2053-1 4/64 fw RETEU 288-60-6-29 https://mirrors.lolinet.com/firmware/moto/fiji/official/RETEU/
Additionally, there is a script in the folder to delete the message when loading that the bootloader is unlocked, it does not interfere much, but I deleted it. Since this is not important, I separated it from the main script, since I did not test it on different versions of the firmware, in theory it should work on all versions, you can try after unlock. Or throw off ROM_45 from your firmware, I'll remove it from it. I now have the latest firmware flashed, it is on the server, but for some reason it did not fly through the air. If you flash it, then you can safely delete the message from the bootloader with my script, there is a file from it)
I am flash in slot_b Android 12 GSI, work. And i have in slot_a original system
severagent007 said:
I am flash in slot_b Android 12 GSI, work. And i have in slot_a original system
Click to expand...
Click to collapse
dude!! followed all your steps and i now have a bootloader unlocked and rooted device. how did you figure out the lk and signature to unlock that??
proof attached below
Слава Украине!!!
can the mods move this to the moto e6s forum so we can spread the news?
luridphantom said:
can the mods move this to the moto e6s forum so we can spread the news?
Click to expand...
Click to collapse
I took the first firmware I got to try from here: https://4pda.to/forum/index.php?showtopic=892755
but the firmware itself is everywhere, for example here:
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
DeveloperLuke Roms - Browse /GSIs at SourceForge.net
sourceforge.net
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
You can try to sew any GSI arm64 a/b from anywhere you find and choose the one you like, because smart supports Project Treble.
If you like one and will look cool and work firmware, post links here!
Tested it and it worked! Thanks a lot!
Now looking for delevoping some roms to this device
Im having a little problem, i tried to flash a GSI with "fastboot -u flash system gsi.img", the device didn't boot. Then i tried to flash the stock with the SP Flash Tool, and i throws an error (status_sec_dl_ forbidden), then i flashed it with Lenovo Rescue and Smart Assistant. I tried to flash via fastboot the patched magisk image but it throws an signature error.
Any help? Tha device still says that is unlocked
refrigerador67 said:
Im having a little problem, i tried to flash a GSI with "fastboot -u flash system gsi.img", the device didn't boot. Then i tried to flash the stock with the SP Flash Tool, and i throws an error (status_sec_dl_ forbidden), then i flashed it with Lenovo Rescue and Smart Assistant. I tried to flash via fastboot the patched magisk image but it throws an signature error.
Any help? Tha device still says that is unlocked
Click to expand...
Click to collapse
did you use the auth file that comes with sp flash tool? without that your device wont boot properly
Yes, i used the correct download agent and auth file
interesting, i followed all his steps and had no problem rooting it. try backtracking with his scripts again?
Solved it, also me and a developer are working on a new, more simple and automated script. Still haven't figured out how to flash the lk via script.
When is done i will post a complete guide in the moto e6s forums on how to do it, i think it might work well, but i would have to test in a non-unlocked device
Can someone please make a video with explanation, I didn't understand very well what is done, so I won't touch anything, but I thank those who record a video explaining it to me (I'm Brazilian)
Here you have a more straight forward guide, note that is still in testing
[GUIDE] How to unlock bootloader on E6s
Hello, in this guide i will show you how to unlock the bootloader on Moto E6s ;) (Sadly for now this guide is Windows only) CAUTION You are doing this AT YOUR OWN RISK! I will NOT take responsibility if you brick your device! Also, remember to...
forum.xda-developers.com
Excuse my ignorance, do you think it is compatible for the XT2053-5 model?
cannot use fastboot flash boot magiskboot.img
sign failed
partition flash is not allowed
hey is the moto e6+ twrp work on e6s