Hi. This is first time I rooted and changed something to my phone's core system. I bootloaded through Flashtool and got in the newest kernel, ROM and GApps from this thread: http://forum.xda-developers.com/showthread.php?t=1613017 and my baseband is 77 (http://www.mediafire.com/?1oyztnqww22bgek). Things looked fine and my system was working as it should. But soon I was starting to see these bugs:
Screen moving from left to right and back at recovery menu on vol up/down press. Not a big bug though, still possible to work with the menu and read the text.
No lockscreen. Tried all the lockscreen options at settings, but power button still just turns the screen on and off. I can only see the lockscreen right after I reboot my phone and before I enter the PIN, the wheel works as I've set it but then I can't get into the lockscreen anymore.
Strange menu button functionality. Firstly, when I was in the home screen and pressed the menu button, a menu with system settings popped up. Now nothing happens, for both HW and SW buttons. Since the time it worked I was just messing with settings but I'm sure I didn't disable anything like that.
Browser and Google Play not working, Play says RH-01 error, browser just crashes. GMail works.
Tilt not working properly. It did after the fresh install, but now it works only for menus, not for homescreen like it did before. I've tried running a widesecreen-only game but it's being displayed in normal, portrait mode- with errors. Enabling/disabling the tilting didn't help.
And I believe that there are more bugs I didn't mention. I did everything as told in this article http://www.theandroidsoul.com/aokp-xperia-neo/, just with getting the newest links instead of the ones provided. I installed the Hallon version of AOKP and I was running GB 2.3.4 before, if that helps. And like I said- I am doing it for the first time so I am quite new to these things, so firstly sorry if I didn't mention anything important and please describe the steps about how to fix it a little bit more detailed. Thanks!
Hi..
That ROM is legend sometimes ago,and dont have problems like you said.
The step I did was like this :
1. Flash full firmware ICS(.ftf file)with flashtool.
2.Flash kernel
3. Flash ROM
4. Flash Gapps
5. Flash Add-on if any
Enjoy
Sent from my Xperia Neo V
MT15i_4.1.B.0.587_Global.ftf ICS firmware and hallon kernel flashed through Flashtool, then rebooted into system. Then in revocery I wiped cache, dalvik and reseted to factory, installed the newest AOKP ROM, installed GApps, booted into system. My screen is still moving from sides as the screen refreshes in recovery. But after booting, still the same issues persist...
Inside the old recovery,screen dancing is known issue,try Flash other kernel,no harm changing kernel.
Can you provide,Aokp ROM version and kernel you have..
Sent from my Xperia Neo V
AOKP Hallon JB Milestone 1
I tried the CM10.1 and my recovery menu fixed but the bugs weren't fixed, so then I flashed the CM10 and my recovery menu changed again, now with black background and again, fixed animations. But then my device bricked so I flashed again the MT15i_4.1.B.0.587_kernel.ftf.
Couldn't you just send me links to a working combination of kernel-firmware with AOKP? The requirements says I need baseband 72/77, do you have any links or tips for these? I've tried several combinations but just none really worked, now I am on stock laggy JB 4.0.4 and I have no idea what to try now...
Hi everyone. If anyone can help I would greatly appreciated. I cannot update to KITKAT whatsoever the only thing that runs is Jelly Bean 4.3 (JWR66Y) (with radio v.48 from older version android image (v S4.2.2 (JDQ39).Screen and digitizer was replaced from ebay) Here are the things I tried after 2 weeks of searching and trying things: I tried all the developer FACTORY images from v4.4--- AND-up with same result ===stuck on bootloop google animation. bubbles but not willing to boot into kitkat
-Fastboot flash-all.bat loaded flashed OKAY ---result: stuck on google kitkat bubble animation
-Wugs Nexus root toolkit will flash but ---------still stock on kitkat bootloop animation
-WorkClockMOd sideload also same results stuck still in bubble animation but doesn't load kitkat
Jelly Bean factory image v 4.3 works fine and stock 4.2 also OR WITH RADIO FROM v.4.2 will update to 4.3 but that is as far as I could go
I did this while rooted/unrooted and I think I tried everything with not much luck(still stuck on boot animation bubbles)
USB/sdk, platform tools and all the files necessary are operational so no issues on that side.
I SHOULD MENTION THAT ON V 4.3 THE OTA UPDATE TO 4.4 NOTIFICATION SHOWS UP BUT WHEN I TRY TO INSTALL IT, IT GIVES ME THE ERROR IN THE IMAGE I ATTACHED OR IT JUST LOADS HALF WAY AND THEN IT SHOWS ME THE ANDROID WITH RED EXCLAMATION MARK!
pls HELP
I took apart phone and realized that the proximity sensor was unplugged (forgot to plug it back in) that was causing the error. All OTA updates now work!
AttilaHun80 said:
Hi everyone. If anyone can help I would greatly appreciated. I cannot update to KITKAT whatsoever the only thing that runs is Jelly Bean 4.3 (JWR66Y) (with radio v.48 from older version android image (v S4.2.2 (JDQ39).Screen and digitizer was replaced from ebay) Here are the things I tried after 2 weeks of searching and trying things: I tried all the developer FACTORY images from v4.4--- AND-up with same result ===stuck on bootloop google animation. bubbles but not willing to boot into kitkat
-Fastboot flash-all.bat loaded flashed OKAY ---result: stuck on google kitkat bubble animation
-Wugs Nexus root toolkit will flash but ---------still stock on kitkat bootloop animation
-WorkClockMOd sideload also same results stuck still in bubble animation but doesn't load kitkat
Jelly Bean factory image v 4.3 works fine and stock 4.2 also OR WITH RADIO FROM v.4.2 will update to 4.3 but that is as far as I could go
I did this while rooted/unrooted and I think I tried everything with not much luck(still stuck on boot animation bubbles)
USB/sdk, platform tools and all the files necessary are operational so no issues on that side.
I SHOULD MENTION THAT ON V 4.3 THE OTA UPDATE TO 4.4 NOTIFICATION SHOWS UP BUT WHEN I TRY TO INSTALL IT, IT GIVES ME THE ERROR IN THE IMAGE I ATTACHED OR IT JUST LOADS HALF WAY AND THEN IT SHOWS ME THE ANDROID WITH RED EXCLAMATION MARK!
pls help.
Click to expand...
Click to collapse
I found with my Nexus that it worked much better to run the fastboot commands manually.
http://forum.xda-developers.com/nexus-4/general/how-to-how-to-flash-factory-image-t2010312 - Check out "D" and the red text after it.
es0tericcha0s said:
I found with my Nexus that it worked much better to run the fastboot commands manually.
http://forum.xda-developers.com/nexus-4/general/how-to-how-to-flash-factory-image-t2010312 - Check out "D" and the red text after it.
Click to expand...
Click to collapse
Thank you, I'll try this now.
AttilaHun80 said:
Thank you, I'll try this now.
Click to expand...
Click to collapse
when i took phone apart I forgot to plug the proximity sensor back in (while replacing screen) after I plugged it back in phone works fine all updates 4.4.4.
DISCONTINUED DUE TO LOWER PERFORAMNCE THAN LEGACY!!!
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What are Nightly builds? Auto compiled builds of the latest CyanogenMod source from github. This version change each night and aren't officialy supported. If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).
All bug reports that don't meet this conditions will be ignored:
You have the kernel provided in the zip file
You made a clean flash and didn't restore anything
You made a detailed review of the problem
You provide a logcat in a .txt file (Search internet)
You provide dmesg or last_kmsg if it is a kernel panic (Search internet)
EVERY AND ALL REPORTS OF BUGS WITHOUT LOGS WILL BE IGNORED. DO NOT POST WITHOUT LOGS BECAUSE NOTHING WILL BE SOLVED. THANKS. I CAN'T DO WITCHCRAFT.
What's working :
Booting
RIL and Mobile Data (Should work for Dual-Sim also) !!! SOMEONE CONFIRM
Storages (Internal and External)
Notification Led
Flashlight
Sound
Wi-Fi
Bluetooth
GPS
Tethering (BT, Wi-Fi, USB)
Sensors
Camera
Browser
Autoselecting your phone based on your MODEM partition
BATTERYLIFE SHOULD BE CRAAAAZYYYY
What's not working :
Video playback
Fm Radio
NFC (I never used it and it is a pain to separate from other versions other than P710)
Other things might be broken please report with logs
Instructions :
Reboot to recovery
Make a full wipe (/system, /data, /cache, /dalvik-cache)
Flash the CM11 zip
Flash Gapps (if you want)
Make factory reset
Reboot to system
Downloads :
ROM:
Older versions:
cm-11-20160222-UNOFFICIAL-vee7-RC1.zip
md5: abe9b3aaa42a3e8dd6f9bdd96bdb02c3
cm-11-20160222-UNOFFICIAL-vee7-RC2.zip
md5: 5dafd54589f603b43780bee5a5d134da
GAPPS:
pa_gapps-modular-nano-4.4.4-20150308-signed.zip
If you really appreciate my work on the L7 II series please consider getting me a coffee right now
Credits :
@Caio99BR
chil360
Y300 Team
TeamHackLg
CyanogenMod
Xda for this nice home
Donators (BIG THANKS!!!) :
XDA:DevDB Information
CM11 vee7 CAF, ROM for the LG Optimus L7 II
Contributors
neutrondev
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CM
Version Information
Status: Stable
Created 2016-02-22
Last Updated 2016-02-22
Reserved
Changelog :
22.02.2016 ---> Initial Release RC1
You have the bugs and what is working in the first post
24.02.2016 ---> RC2
overclocked cpu
added governors
added hardware monitoring for battery
probably fixed dual sim
Reserved
Wow! This so fast. hahaha!
I have P716 and I will flash then as soon as I download it.
'll test and post the feedback. If you need some test of roms for dual sim devices you can ask me.
Anyway thank's for your efforts for our device.
In P716 boot is run( although the boot in this is slightly slower than the other ROMs, but ok), so start the device,
sim card's are detecded, but when i try enable then, an error occurs and activation failed, and return to mesage "new sim card detected....", then I was not able to activate neither one sim card.
So, return to the welcome page and after choose the language, a bar run, and aking "just a sec...", after few minutes, setup wizard crashes "Unfortunately, Setup Wizard has stoped". Device does not start.
I was trying reboot for sometimes, but every time the same occurs.
I read and follow all instructions and flash this rom two times.
As the device does not start, I was unable to get Catlog. Sorry.
Edit:
Now I tried to flash without GAPPS and it worked.
But, Setup Wizard not loaded. it probably crash. Before the first boot go directly to the Home screen. All configuration, wifi, data, time, language, ... was done manually.
Too, simcard's faliled to activated. included by terminal. I will provide the logcat soon. I'm sleepy now. hehe
After, I reboot to recovery and flash GAPPS now it worked. When rebooted playstore app not works in first time, after new rebooted, playstore app works but was slowly for now all ok.
The rest all ok for now. too videoplayback is ok.
What is CAF? How is it different from normal and your previous cm11 build.
XDA-00 said:
What is CAF? How is it different from normal and your previous cm11 build.
Click to expand...
Click to collapse
First search result in google: https://www.reddit.com/r/Android/comments/1rt9md/eli5_what_is_caf_why_is_cm_going_caf_affects_the/
shhnedo said:
First search result in google: https://www.reddit.com/r/Android/comments/1rt9md/eli5_what_is_caf_why_is_cm_going_caf_affects_the/
Click to expand...
Click to collapse
So Qualcomm devices(like my p715) will have increased performance/battery life with custom roms having CAF. Right?
XDA-00 said:
So Qualcomm devices(like my p715) will have increased performance/battery life with custom roms having CAF. Right?
Click to expand...
Click to collapse
Something along those lines, yes.
Sorry i don't understand one thing, to flash this rom, and Also your cm12-13, i have to use twrp3 or can I use my old cwm, the old no-touch version? Sorry for my bad english
MustangBR said:
In P716 boot is run( although the boot in this is slightly slower than the other ROMs, but ok), so start the device,
sim card's are detecded, but when i try enable then, an error occurs and activation failed, and return to mesage "new sim card detected....", then I was not able to activate neither one sim card.
So, return to the welcome page and after choose the language, a bar run, and aking "just a sec...", after few minutes, setup wizard crashes "Unfortunately, Setup Wizard has stoped". Device does not start.
I was trying reboot for sometimes, but every time the same occurs.
I read and follow all instructions and flash this rom two times.
As the device does not start, I was unable to get Catlog. Sorry.
Edit:
Now I tried to flash without GAPPS and it worked.
But, Setup Wizard not loaded. it probably crash. Before the first boot go directly to the Home screen. All configuration, wifi, data, time, language, ... was done manually.
Too, simcard's faliled to activated. included by terminal. I will provide the logcat soon. I'm sleepy now. hehe
After, I reboot to recovery and flash GAPPS now it worked. When rebooted playstore app not works in first time, after new rebooted, playstore app works but was slowly for now all ok.
The rest all ok for now. too videoplayback is ok.
Click to expand...
Click to collapse
I need dmesg and logcat and logcat -b radio. we will fix it
@MustangBR
Flash this in recovery then tell me if it works.
https://www.androidfilehost.com/?fid=24421527759886035
shhnedo said:
Something along those lines, yes.
Click to expand...
Click to collapse
Great!
Its strange for me TWRP 3x recovery writes during installation about "unable to mount system on block 14 and data on block 20 device is busy".Nothing wrong,just strange.
First bug just on first start,setup wizard "unfortunatelly stopped" after lang selection,with or without SIM and all.Maybe reason is i am flashing not provided gApps pack but just micro[dont need lots of junk in /system]. Logcat named xD is in attached RAR.May be You will see what went wrong,sir.
Flashed without gApps,first start is working well=) .BTW if i install that micro gApps after first start,evth is fine.
Then,about camera.While focusing camera app crushes,the same was on Weritos CM with his videorecording fix.Logcat named camera attached[not filtered by error type and thats why too large,sorry].
Gonna test and look now,what else can I see.
Okay,turned developer settings ON,setted all animations to 0.5x,seems all works well on my 713.
And a question,will ART work better than Dalvik?
neutrondev said:
I need dmesg and logcat and logcat -b radio. we will fix it
@MustangBR
Flash this in recovery then tell me if it works.
https://www.androidfilehost.com/?fid=24421527759886035
Click to expand...
Click to collapse
Log are attached.
I was not able to download RIL_DS.zip, tried several mirror, but will not download.
I'll try to download more times, so get flash it I reply here.
Edit:
I was able to download now and flash it.
Remain the same any sim can not be activated. New log's below
MustangBR said:
Log are attached.
I was not able to download RIL_DS.zip, tried several mirror, but will not download.
I'll try to download more times, so get flash it I reply here.
Edit:
I was able to download now and flash it.
Remain the same any sim can not be activated. New log's below
Click to expand...
Click to collapse
I will look into it. It seems there are some issues .
@MustangBR add this line to build.prop and restart
ro.telephony.ril_class=LGEQualcommUiccRIL
Okay,played a bit with ROM.
First,smth is with lockscreen when music is played.Pictures sometime stuck,and even with player off it sometimes freezes a bit while unlocking.
Second,few times stuck on main screen with music played,one time phone even rebooted itself,other times i pulled battery.
Then,as in another CM builds,maximum volume is ABNORMAL high.
Also,sometimes battery indicates strange.I was goin home with 9%,then raised to 14% and now 20%.
Will try to catch error about freezes in music/locker soon,probably tomorrow will send an logcat.
ART works good=)
And my opinion:This will be the best ROM for vee7.Holds battery great,and works great[i changed launcher to Nova for myself to have biggest grid in menu]
And can i ask to add Smartass Governor to kernel?
DS_katauri said:
Okay,played a bit with ROM.
First,smth is with lockscreen when music is played.Pictures sometime stuck,and even with player off it sometimes freezes a bit while unlocking.
Second,few times stuck on main screen with music played,one time phone even rebooted itself,other times i pulled battery.
Then,as in another CM builds,maximum volume is ABNORMAL high.
Also,sometimes battery indicates strange.I was goin home with 9%,then raised to 14% and now 20%.
Will try to catch error about freezes in music/locker soon,probably tomorrow will send an logcat.
ART works good=)
And my opinion:This will be the best ROM for vee7.Holds battery great,and works great[i changed launcher to Nova for myself to have biggest grid in menu]
Click to expand...
Click to collapse
Will add governors and Hardware monitor of battery sure.
neutrondev said:
I will look into it. It seems there are some issues .
@MustangBR add this line to build.prop and restart
ro.telephony.ril_class=LGEQualcommUiccRIL
Click to expand...
Click to collapse
No way.
Now when to open dialer app this is crashes. The same occurs when trying to configure and activate simcard in configurations he crashes.
Also now show only one sim card symbol on the top bar of the screen, before this command appeared two.
I confirm all @DS_katauri has written. I noted the same things. + sometimes after pressing the power button to block screen and press it again to unblock screem takes several seconds with black screen until to show the screen.
GPS(included navigation mode), camera, wifi, sensors, usb, sound,video, browsers are fine, batterylife is unbelievable, very good.
Not a ROM bug,i forget to use some autostarts manager and disable sync=)
Seems ROM is stable,no reboots for night.Just damn gApps.
@MustangBR
Try the new version. Clean flash. Tell me if Dual Sim works.
@DS_katauri
Overclocked CPU and governors are there.
Also battery is monitored with kernel interface now.