You are now entering an open alpha ROM thread. If you want to take a spin at it and report bugs, download, otherwise don't download. You are responsible for your actions while using this alpha. It's a port of jereksel's work here.
Troubleshooting:
If you get a bootloop using the included kernel, try flashing NewMacLaw's CM10 (NOT CM10.1) kernel. And then try booting.
Download:
MIUI v5 Alpha 2
MIUI v5 Kernel Alpha 1 - Install if the ROM bootloops (make a fresh install)
Install like any other CM10.1 ROM.
Reserved
CedArctic said:
Reserved
Click to expand...
Click to collapse
Can you post the CM10 kernel please? I want to try this port
---------- Post added at 05:25 PM ---------- Previous post was at 04:26 PM ----------
I replace the boot image with the CM10 and still not booting
would not have to test roms, why do you share here?
Gapps are included ?
Moraga said:
Gapps are included ?
Click to expand...
Click to collapse
It doesn't boot ATM so I wouldn't download it if I where you and no gapps are not included
Yes i saw that...
Please solve this problem
It does boot ?
Moraga said:
It does boot ?
Click to expand...
Click to collapse
New release boots perfectly
Edit: after registration it reboots and bootloops
ianstump said:
New release boots perfectly
Edit: after registration it reboots and bootloops
Click to expand...
Click to collapse
Try not registering and give me feedback please this is very important. Thank you
I tried... But it is impossible to bypass the registration. Just when mihome starts to load, it bootloops
Sent from my GT-I8190 using xda app-developers app
ianstump said:
I tried... But it is impossible to bypass the registration. Just when mihome starts to load, it bootloops
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
So MiHome crashes and the whole thing bootloops?
Is it possible try to use another launcher?
Sent from my GT-I8190 using xda app-developers app
CedArctic said:
So MiHome crashes and the whole thing bootloops?
Click to expand...
Click to collapse
congratulations, run the launcher and freezes
If this ROM works, it will be my daily rom FOREVER
CedArctic said:
So MiHome crashes and the whole thing bootloops?
Click to expand...
Click to collapse
Yeah, and actually I tried to wipe dalvik and fix permissions but nothing . Also when it bootloops the soft keys turn on.
Sent from my GT-I8190 using xda app-developers app
Can anybody try to remove MiHome from zip and try to use Nova Launcher (or similar)?
scattoit said:
Can anybody try to remove MiHome from zip and try to use Nova Launcher (or similar)?
Click to expand...
Click to collapse
Did that, bootloops
scattoit said:
Can anybody try to remove MiHome from zip and try to use Nova Launcher (or similar)?
Click to expand...
Click to collapse
Update is coming! We make some changes and hope the next build will work! Stay tuned...! :fingers-crossed:
I can't boot ! When will you release the next build ? If it works nice it'll be my daily rom too !
Related
IF YOU HAVE ANY QUESTIONS WITH THIS ROM, YOU SHOULD GO HERE.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
warning:you have to re-partiton to new hboot
can be installed to partition that has 250mb+ system and 10mb+ cache(it uses about 240mb with gapps included)
If you don't want to use app2sd, you can resize system partiton to 190mb.
Click to expand...
Click to collapse
If you have any questions, you should go HERE
Click to expand...
Click to collapse
you have to resize hboot to 250mb system 10 cache
md5:5690e08e2dfbe73fe0a1cc5f691ecae9
If your phone bricks or you cannot flash it because of errors, you should check md5 before post questions.
Click to expand...
Click to collapse
featured:
Gapps included
Multi-language support
My SD Card write speed in this ROM(10 class):12.8MB/s
in recovery:9.82MB/s
Click to expand...
Click to collapse
Working:
Data
Wifi + Tether
Bluetooth
Rotation
Mic
Sound
Usb Mass storage
Gps
Scripts(like app2sd)
Trackball wake
HWA
Camera
Click to expand...
Click to collapse
I need feedbacks....
I ported CM10 using Evervolv 3.0.0.(thanks to Evervolv team)
DOWNLOAD
changelog:
v3.7:Improved speed, stability
but you have to resize hboot to 250mb system 10 cache
v3.5:updated OTAupdater
updated to latest
S2E included
v3.3:fixed OTA issues
v3.2:updated OTAUpdater(may fixed ota issues. try when next version is out)
v3.1:updated OTAUpdater.apk
v3.0:Almost everything
v2.5:reverted to original SustemUI
updated to latest Evervolv
v2.4:updated to latest Evervolv
v2.3:changed camera.apk to miui camera(thanks MIUI team)
if you want battery percentage in the middle of battery icon, you can download and push SystemUI.apk to system/app(thanks GeyerA)
v2.2:updated graphic driver(very smooth)
v2.1:Trackball wake/Volume rocker music control included!(thanks to Evervolv team)
included Explorer app
v2:HWA IS WORKING!(thanks to Evervolv team, not me)
v1:initial release
Click to expand...
Click to collapse
I removed [alpha] and [dev] but It's still preview version(because, Evervolv JB AND CM10/AOKP is preview version)
Click to expand...
Click to collapse
Screenshots are attached.
This port is from hd2 forum, so all credits should go to evervolv&hd2 devs
Dowloading .....
ill test and give a feedback
Tried installing but getting Error (Status 6) in CWM.
djxcee said:
Tried installing but getting Error (Status 6) in CWM.
Click to expand...
Click to collapse
I'm getting the same error in 4ext.
Wait, I will fix it immediately
Sent from my Nexus One using xda premium
reider123 said:
Wait, I will fix it immediately
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
Sure thing! Thanks and can't wait.
Uploaded, please download 1.1
and sorry for wrong-file upload
So is the HWA working good? I don't expect it to be buttery smooth but its always good to know...
Sent from my Nexus One using xda app-developers app
Not now.
I ported it on evervolv jellybean so hwa will work when evervlov team fixes it.
So all the donation should go to evervolv team.
Sent from my Nexus One using xda premium
Its working well however I don't believe hwa is working.
Will post back once I have time to work on it
Sent from my Nexus One using xda premium
reider123 said:
Not now.
I ported it on evervolv jellybean so hwa will work when evervlov team fixes it.
So all the donation should go to evervolv team.
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
Hey reider123,
I installed and most things look fine so far. Google search and voice input crash. Maybe I should try to install the gapps that we did with the jellybean port?
thrik said:
Hey reider123,
I installed and most things look fine so far. Google search and voice input crash. Maybe I should try to install the gapps that we did with the jellybean port?
Click to expand...
Click to collapse
I deleted everything in gapps except for APKs to reduce system memory, so if you want to use, you have to flash jb gapps
Sent from my Nexus One using xda premium
just wanted to know before flashing... are the a2sd commands same as evervolvs??
reider123 said:
I deleted everything in gapps except for APKs to reduce system memory, so if you want to use, you have to flash jb gapps
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
Oh okay. Thanks a lot for the port friend, it really looks nice. Was missing notification toggles
kurt.gomez said:
just wanted to know before flashing... are the a2sd commands same as evervolvs??
Click to expand...
Click to collapse
Yep.
testing!!! thanks!
Thème chooser ?
Sent from my Nexus One using Tapatalk 2
can be installed with partitions gapps with ICS if you have installed the BCM or the evervolv?
thank you very much!
Enviado desde mi Nexus One usando Tapatalk 2
Testing ... Thanks ...;D
trackball wake works?
IF YOU HAVE ANY QUESTIONS WITH THIS ROM, YOU SHOULD GO HERE.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
warning:you have to re-partiton to new hboot
can be installed to partition that has 160mb+ system and 8mb+ cache(it uses about 152mb with gapps included)
Click to expand...
Click to collapse
md5:b221b65e8e818d35d7296a2c135d84a1
If your phone bricks or you cannot flash it because of errors, you should check md5 before post questions here
Click to expand...
Click to collapse
featured:
Gapps included
Multi-language support
My SD Card write speed in this ROM(10 class):14.0MB/s
in recovery:9.82MB/s
Click to expand...
Click to collapse
Working:
Data
Wifi(Tether seems not working)
Bluetooth
Rotation
Mic
Sound
Usb Mass storage
Gps
Scripts(like app2sd)
Trackball wake
Volume button wake
HWA
Camera
Click to expand...
Click to collapse
I need feedbacks....
I ported AOKP using Evervolv 3.0.0.(thanks to Evervolv team)
DOWNLOAD
changelog:
v3.1:fixed superuser issue
v3.0:updated OTAupdater
included S2E
updated to latest
v2.3:fixed OTA issues
v2.2:may fixed ota issues(try when next build is out)
v2.1:fixed Phone.apk issue
fixed Superuser.apk permission issue
updated OTAUpdater
v2.0:Almost everything
v1.5:updated to latest Evervolv
v1.4:updated to latest Evervolv
fixed superuser
v1.3:changed camera.apk
v1.2:changed superuser -> supersu
removed filemanager(has explorer)
graphic driver update
version 2.0 has so many errors so I will upload v1.2 first.(v2.0 cannot mount usb-storage. when try, settings stop.)
v1.1:Changed AOKP-specific
v1:initial release
Click to expand...
Click to collapse
I removed [alpha] and [dev] but It's still preview version(because, Evervolv JB AND CM10/AOKP is preview version)
Click to expand...
Click to collapse
Screenshots are attached.
This port is from hd2 forum, so all credits should go to evervolv&hd2 devs
As always, this is alpha version so you should not expect too much
do it at your own risk
reider123 said:
As always, this is alpha version so you should not expect too much
do it at your own risk
Click to expand...
Click to collapse
Which AOKP build number did you use for porting?
taodan said:
Which AOKP build number did you use for porting?
Click to expand...
Click to collapse
Edit:it says preview 5 version
Sent from my Nexus One using xda premium
Do you think runs smoother AOKP or CM10 ? there is a difference of about 40 mb as I see between the 2 version or am I wrong?
fegato said:
Do you think runs smoother AOKP or CM10 ? there is a difference of about 40 mb as I see between the 2 version or am I wrong?
Click to expand...
Click to collapse
you're right
seems AOKP is much faster than cm10
beside, can you test it? I AM using it, but mant people have their own phone-using-habits
reider123 said:
you're right
seems AOKP is much faster than cm10
beside, can you test it? I AM using it, but mant people have their own phone-using-habits
Click to expand...
Click to collapse
Yes I said that because I'am testing now and seems a bit faster to me too also in booting and Include NovaLauncher also. Nice surprise.
Oh and to get rid of the NavBar I set its height to 0, It's right? maybe it's intresting for someone else..
fegato said:
Yes I said that because I'am testing now and seems a bit faster to me too also in booting and Include NovaLauncher also. Nice surprise.
Oh and to get rid of the NavBar I set its height to 0, It's right? maybe it's intresting for someone else..
Click to expand...
Click to collapse
If you want to get rid of the Navigation bar, you must set its height AND height landscape
Is it possible to flash it with 4ext?
timmy93 said:
Is it possible to flash it with 4ext?
Click to expand...
Click to collapse
try it. but some recoveries cannot flash this ROM
timmy93 said:
Is it possible to flash it with 4ext?
Click to expand...
Click to collapse
worked for me without issues
Can I have one question
In the ics wifi not working for me
I must install wifix to male it on
So what about JB is it the same? ??
Because the wifi is not working for me
Sorry for my bad English
Sent from my Nexus One using xda premium
Do I have to use the partition you request to use or can I use texasics partition for ics
Sent from my Nexus One using xda app-developers app
adio201 said:
Do I have to use the partition you request to use or can I use texasics partition for ics
Sent from my Nexus One using xda app-developers app
Click to expand...
Click to collapse
can be installed to partition that has 160mb+ system and 8mb+ cache(it uses about 152mb with gapps included)
---------- Post added at 04:57 PM ---------- Previous post was at 04:54 PM ----------
tariqso said:
Can I have one question
In the ics wifi not working for me
I must install wifix to male it on
So what about JB is it the same? ??
Because the wifi is not working for me
Sorry for my bad English
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
do you have the correct partition???do you do the correct wipe,can you say more information about your problem?
Trackball wake! w0w! Downloading now...
hi rayder123 good job man!:good:
---------- Post added at 05:00 PM ---------- Previous post was at 05:00 PM ----------
clustered said:
Trackball wake! w0w! Downloading now...
Click to expand...
Click to collapse
yeah!!!!it is amazing!
clustered said:
Trackball wake! w0w! Downloading now...
Click to expand...
Click to collapse
Sadly there's no option to disable trackball wake
I think most people don't want trackball wake as it's only for people having power button broken (wonder why there are som any nexus one with broken power button ?? mine is totally fine after 2 years of intense usage)...
in texas ice rom there's an option to desactivate it ... can it be added to AOKP (and CM10 along the way ... )
---------- Post added at 05:06 PM ---------- Previous post was at 05:04 PM ----------
reider123 said:
try it. but some recoveries cannot flash this ROM
Click to expand...
Click to collapse
I flashed with 4ext and everything went fine ...except that terminal emulator was crashing !
Could it be a flashing problem ? I'll try with 4ext again to confirm then with amon-ra (as you seem to recommand this recovery).
EDIT : even with Ra recovery terminal emulator is crashing ... anyone having the same problem ? or is it me ?
OK I install the from works faster and smoother then texasics jelly bean but I flash without the gapps and Google now fc when opening...anyone else had this problem
Sent from my Nexus One using xda app-developers app
I must say, this is a pretty impressive port. Is odd that Google Voice works on this and not Drew's as it is the same base. Any possibility of getting the stock keyboard back in there? I know you can download the one from the Play store, but its not as good and the included one is too cartoonish for my liking. Well done though!
reider123 said:
Edit:it says preview 5 version
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
Flashed the ROM. Kam-sa-ham-ni-da
Aargh... well, to start, I couldn't get CM10 past the boot animation. No worries, I was able to load MeanROM just fine. All apps are there, and loaded Gapps 4.1 as well - I even flashed the kernel. So I can boot and have normal phone operation, except for...
Although I do have internet access,
1) Play Store will not connect.
2) Gmail keeps crashing
3) And none of my Google accounts have an option to sync contacts.
Three strikes!
Can someone help me with any of the aforementioned problems?
finalewiz said:
Aargh... well, to start, I couldn't get CM10 past the boot animation. No worries, I was able to load MeanROM just fine. All apps are there, and loaded Gapps 4.1 as well - I even flashed the kernel. So I can boot and have normal phone operation, except for...
Although I do have internet access,
1) Play Store will not connect.
2) Gmail keeps crashing
3) And none of my Google accounts have an option to sync contacts.
Three strikes!
Can someone help me with any of the aforementioned problems?
Click to expand...
Click to collapse
You shouldn't flash the gapps sense roms have them baked in try just wiping and reflash
Sent from my EVO using Tapatalk 2
finalewiz said:
Aargh... well, to start, I couldn't get CM10 past the boot animation. No worries, I was able to load MeanROM just fine. All apps are there, and loaded Gapps 4.1 as well - I even flashed the kernel. So I can boot and have normal phone operation, except for...
Although I do have internet access,
1) Play Store will not connect.
2) Gmail keeps crashing
3) And none of my Google accounts have an option to sync contacts.
Three strikes!
Can someone help me with any of the aforementioned problems?
Click to expand...
Click to collapse
yeah I'm having the same issue, except for I'm still using cm10 latest nightly. Can't seem to get google to sync at all. had the keyboard crash over and over again as well. also my home and recent buttons don't respond at all either. They vibrate when pressed but other than that nothing happens.
Kernal version 3.0.51 -geb1844c
android version 4.1.2
cm10 version 10-20121205 nightly jewel
currently downloading cm10.0.0 and giving that a try...
thanks in advance
---------- Post added at 12:51 AM ---------- Previous post was at 12:46 AM ----------
thicklizard said:
You shouldn't flash the gapps sense roms have them baked in try just wiping and reflash
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
So what version should i get for gapps... sorry probably newb question...and should i wipe anything to install it and what should i use to install it with. used team wins touch recovery last time to install both rom and gapps
cerius said:
yeah I'm having the same issue, except for I'm still using cm10 latest nightly. Can't seem to get google to sync at all. had the keyboard crash over and over again as well. also my home and recent buttons don't respond at all either. They vibrate when pressed but other than that nothing happens.
Kernal version 3.0.51 -geb1844c
android version 4.1.2
cm10 version 10-20121205 nightly jewel
currently downloading cm10.0.0 and giving that a try...
thanks in advance
---------- Post added at 12:51 AM ---------- Previous post was at 12:46 AM ----------
So what version should i get for gapps... sorry probably newb question...and should i wipe anything to install it and what should i use to install it with. used team wins touch recovery last time to install both rom and gapps
Click to expand...
Click to collapse
Which gapps did you use? You should use the ones linked on IRC or the 4.2 gapps and no wipe is needed although you can wipe dalvik cache if you want.
Edit I think the gapps you need are dated as 20121011 jb gapps
Edit 2 are you son? Because I believe the kernel should be 3.0.53
Sent from my EVO using Tapatalk 2
thicklizard said:
Which gapps did you use? You should use the ones linked on IRC or the 4.2 gapps and no wipe is needed although you can wipe dalvik cache if you want.
Edit I think the gapps you need are dated as 20121011 jb gapps
Edit 2 are you son? Because I believe the kernel should be 3.0.53
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
yeah I am s-on. and i have kernal 3.0.51 - geb1844c
would i use goomanager to flash the image from the rom? and if so wouldnt i use the latest nightly or the stable cm10.0.0?
cerius said:
yeah I am s-on. and i have kernal 3.0.51 - geb1844c
would i use goomanager to flash the image from the rom? and if so wouldnt i use the latest nightly or the stable cm10.0.0?
Click to expand...
Click to collapse
You would flash the bootimg of which ever one you flashed
Sent from my EVO using Tapatalk 2
thicklizard said:
You would flash the bootimg of which ever one you flashed
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
im going to retry the flash image gui with the rom i have used, cm10.0.0, and install the gapps you said to use. will post in a bit
---------- Post added at 02:16 AM ---------- Previous post was at 01:34 AM ----------
cerius said:
im going to retry the flash image gui with the rom i have used, cm10.0.0, and install the gapps you said to use. will post in a bit
Click to expand...
Click to collapse
install of the recent gapps seems to have gotten everything to work.. just my data connection now is super slow....any ideas ?
cerius said:
im going to retry the flash image gui with the rom i have used, cm10.0.0, and install the gapps you said to use. will post in a bit
---------- Post added at 02:16 AM ---------- Previous post was at 01:34 AM ----------
install of the recent gapps seems to have gotten everything to work.. just my data connection now is super slow....any ideas ?
Click to expand...
Click to collapse
Gapps shouldn't effect data so I really don't have anything but maybe turn in airplane mode for a minute then turn off airplane mode
Sent from my EVO using Tapatalk 2
thicklizard said:
You shouldn't flash the gapps sense roms have them baked in try just wiping and reflash
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
what do you mean.. "baked in"? you mean JUST flash MeanRom, and no Gaaps? thanks
finalewiz said:
what do you mean.. "baked in"? you mean JUST flash MeanRom, and no Gaaps? thanks
Click to expand...
Click to collapse
Sense roms don't require flashing gapps only AOSP,AOKP,CM10,ect.
thicklizard said:
You shouldn't flash the gapps sense roms have them baked in try just wiping and reflash
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
bigdaddy619 said:
Sense roms don't require flashing gapps only AOSP,AOKP,CM10,ect.
Click to expand...
Click to collapse
Awesome - that did the job. I see you're using the same ROM as me - what is the process to overclock, or is the ROM already doing that
(donation on the way)
finalewiz said:
Awesome - that did the job. I see you're using the same ROM as me - what is the process to overclock, or is the ROM already doing that
(donation on the way)
Click to expand...
Click to collapse
MeanROM comes overclocked at 1.7 or there is a zip you can flash and overclock at 1.8
Sent from my MB855 using xda app-developers app
BTW got it working.. just a slow connection while WiFi tethering. Fixed that also.
Sent from my EVO using xda app-developers app
Hello,
Does Thethering work on for this ROM?, http://forum.xda-developers.com/showthread.php?t=2140902?? I tried turning on Wifi AP and nothing happens. Also, is there a way to disable wallpaper scrolling on Bozooka Launcher for this same ROM??
Thank you.
Update: since the ROM is based off of CM10, tethering will not work yet. Not sure if epinter's fix will work. Also, there is no option to disable wallpaper scrolling. You will need to use a different launcher.
Thanks.
epinter's overclock kernel
Just to answer more avatar ROM questions. Epinter's 1.3 ghz over clock kernel will work on this ROM. http://forum.xda-developers.com/showthread.php?t=2140902&page=18.
Make sure its the cm10 version and not the cm10.1. Normal installation, just flash through CWM.
It will generate more heat but its bearable.
Mojar7070 said:
Just to answer more avatar ROM questions. Epinter's 1.3 ghz over clock kernel will work on this ROM. http://forum.xda-developers.com/showthread.php?t=2140902&page=18.
Make sure its the cm10 version and not the cm10.1. Normal installation, just flash through CWM.
It will generate more heat but its bearable.
Click to expand...
Click to collapse
Here is the link to the kernel. All credit goes to epinter. Thank you sir.
http://goo.im/devs/epinter/kernel_oc1300-cm10-20121026_1456-epinter-olympus.zip
O hi, i"ll just leave it her3.
I'll use this thread .
I've flashed Avatar and enjoyed it very much,until the gapps update. Phone's been crashing constantly ,making it imposible to use and i had to restore back to CM7. Is there any way around ? A flashed with full wipe.
BoriDe said:
I'll use this thread .
I've flashed Avatar and enjoyed it very much,until the gapps update. Phone's been crashing constantly ,making it imposible to use and i had to restore back to CM7. Is there any way around ? A flashed with full wipe.
Click to expand...
Click to collapse
which gapps update did you use?? If you used the gapps from the 3.1.10 kernel version of AvatarRom, it may not work, not sure though. This thread for the Previous version of AvatorROM with the Gingerbread kernel using the 20121019 GApps.
I flashed the latest build,full clean wipe. Gapps were installed through rom update app (20121011).
I tryed reflashing the rom and trying again and although installation came through (i could sync with google acount) , no
google play icon is showing'only Gtalk.
---------- Post added at 02:04 PM ---------- Previous post was at 01:57 PM ----------
I used avatar-2.15b-0-20130614-UNOFFICIAL-olympus.zip build.
BoriDe said:
I flashed the latest build,full clean wipe. Gapps were installed through rom update app (20121011).
I tryed reflashing the rom and trying again and although installation came through (i could sync with google acount) , no
google play icon is showing'only Gtalk.
---------- Post added at 02:04 PM ---------- Previous post was at 01:57 PM ----------
I used avatar-2.15b-0-20130614-UNOFFICIAL-olympus.zip build.
Click to expand...
Click to collapse
Not sure then bro. Have you tried "fix permission" through your recovery?? I remember with the old build there were 2 Zip files, the zip files needed to be installed first, one after the other and then the Gapps. then wipe dalvik cache and/ (optional: cache partition) and reboot system.
Also, as it was mentioned before, the 3.1.10 Kernel in Latest Cm10.1 builds still has bugs. So if your concerned about a daily driver Rom you should probably stick with a CM7 based rom or at the Previous AvatarRom build. Sorry I couldn't help.
Tryed all that , no go. Its a very solid ROM ,but kinda useless without the Gapps. This is actually the only thing that didn't work. Otherwise a true daily driver candidate.
BoriDe said:
Tryed all that , no go. Its a very solid ROM ,but kinda useless without the Gapps. This is actually the only thing that didn't work. Otherwise a true daily driver candidate.
Click to expand...
Click to collapse
Have you guys tried the gapps from epinter? Latest gapps package should be 20130301
Sent from my MB860 using xda app-developers app
palmbeach05 said:
Have you guys tried the gapps from epinter? Latest gapps package should be 20130301
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Isn't it advised to use only the Gapps that dev team supplyes with ROM?
BoriDe said:
Isn't it advised to use only the Gapps that dev team supplyes with ROM?
Click to expand...
Click to collapse
Not necessarily, if you have a rom with one android version, it's compatible with the gapps for that device and android version
Sent from my MB860 using xda app-developers app
palmbeach05 said:
Not necessarily, if you have a rom with one android version, it's compatible with the gapps for that device and android version
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Well butter my ass and call me Sally,it worked. Flashed the ROM, flashed most recent GApps and it work just fine. Thanks.
BoriDe said:
Well butter my ass and call me Sally,it worked. Flashed the ROM, flashed most recent GApps and it work just fine. Thanks.
Click to expand...
Click to collapse
Lol no problem Sally
Sent from my MB860 using xda app-developers app
BoriDe said:
Well butter my ass and call me Sally,it worked. Flashed the ROM, flashed most recent GApps and it work just fine. Thanks.
Click to expand...
Click to collapse
Sweet deal. Learned something new as well.
Sent from my Nexus 7 using xda app-developers app
Team Win Recovery Project v2.6.3.0
Code:
Do at your own risk .. I would not be responsible for world war 3, pregnant girlfriend , UFO, dead phone so DON'T BLAME ME if you don't know what you are doing!
Remember i'm not the dev who made this recovery im sharing this on behalf of @link_lunk (Andiee Pratama) so if you have any queries you can pm here
Installation:
1. Download provided twrp zip from attachment
2. Push it to your extsd
3. Boot into your existing recovery ( CWM ) :silly:
4. Select provided zip and flash it
5. poweroff and boot into recovery
6. you can boot in to twrp mode by pressing same hardware keys you did for cwm
7. Done & Enjoy
After you boot into recovery you will see twrp menu
Go to Settings --> And untick everything
Done now you can flash your zip , backup , wipe data , etcDownloads : https://drive.google.com/file/d/0B4wmcx9icZtxNGRkdXAyekNOVEk/edit
Credits : @link_lunk , cleverior [/MENTION] and you
For bugs Discussion : http://forum.xda-developers.com//galaxy-star/help/qa-teamwin-recovery-project-twrp-t3151524 thanks @QA Bot
Screens
Here
Reserved for Themes
Coming soon
corphish said:
Coming soon
Click to expand...
Click to collapse
Thanks we are waiting for themes
hey hey hey so can we start making android 4.2 and up or not ?
Wow finally TWRP for Our Device
LahKeda said:
hey hey hey so can we start making android 4.2 and up or not ?
Click to expand...
Click to collapse
I already booted CM10.2 (Android 4.3)
Sent from my C2104 using Tapatalk
corphish said:
I already booted CM10.2 (Android 4.3)
View attachment 3393877
View attachment 3393879
Sent from my C2104 using Tapatalk
Click to expand...
Click to collapse
u are talking abiut that update ri8???
ShadeSK said:
u are talking abiut that update ri8???
Click to expand...
Click to collapse
which update?
is it working
corphish said:
I already booted CM10.2 (Android 4.3)
View attachment 3393877
View attachment 3393879
Sent from my C2104 using Tapatalk
Click to expand...
Click to collapse
is it fixed...or bug free.???
flash cm10.1 Then connect ur device through wifi now check system updates
---------- Post added at 02:46 PM ---------- Previous post was at 02:46 PM ----------
www.droidviews.com/install-material-design-themes-for-twrp-recovery/
What about This Theme OP @Pikachu
ShadeSK said:
flash cm10.1 Then connect ur device through wifi now check system updates
---------- Post added at 02:46 PM ---------- Previous post was at 02:46 PM ----------
www.droidviews.com/install-material-design-themes-for-twrp-recovery/
What about This Theme OP @Pikachu
Click to expand...
Click to collapse
well the update you receive on com 10.1 (psychs build) is not for our device
so dont try to flash that or else you will have to lose your device
corphish has build cm10.2 from source and its highly unstable
btw we need to port twrp themes since it doesnot support on our screen resolution
scaling down images would work i think
Hungryhacker said:
is it fixed...or bug free.???
Click to expand...
Click to collapse
I just made it to boot. Nothing works.
Infact systemui force closes, I removed sysui to take the pic.
They mostly fc because of selinux.
I built CM10 as well and fixed internal storage.
ShadeSK said:
flash cm10.1 Then connect ur device through wifi now check system updates
---------- Post added at 02:46 PM ---------- Previous post was at 02:46 PM ----------
www.droidviews.com/install-material-design-themes-for-twrp-recovery/
What about This Theme OP @Pikachu
Click to expand...
Click to collapse
LOL.
No the CM10.2 is built by me.
corphish said:
I just made it to boot. Nothing works.
Infact systemui force closes, I removed sysui to take the pic.
They mostly fc because of selinux.
I built CM10 as well and fixed internal storage.
LOL.
No the CM10.2 is built by me.
Click to expand...
Click to collapse
I remember that we needed to CWM 6.4 or higher to boot Kitkat at all , can you continue developing your CM ?
LahKeda said:
I remember that we needed to CWM 6.4 or higher to boot Kitkat at all , can you continue developing your CM ?
Click to expand...
Click to collapse
I have CM10.2 sources (without repo)
corphish said:
I just made it to boot. Nothing works.
Infact systemui force closes, I removed sysui to take the pic.
They mostly fc because of selinux.
I built CM10 as well and fixed internal storage.
LOL.
No the CM10.2 is built by me.
Click to expand...
Click to collapse
Hell Yeah Good work But Hope u can fix it soon And bro anynews about fixing ril?? Cuz i'm still waiting for that fixed
ShadeSK said:
Hell Yeah Good work But Hope u can fix it soon And bro anynews about fixing ril?? Cuz i'm still waiting for that fixed
Click to expand...
Click to collapse
Well I was very close, got RIL to connect just like stock, but dont know why got f*cked at last
corphish said:
I already booted CM10.2 (Android 4.3)
View attachment 3393877
View attachment 3393879
Sent from my C2104 using Tapatalk
Click to expand...
Click to collapse
Hey Please provide me the link of cm 10.2 and is all the problems and bugs that we faced in cm 10 for our device is now fixed...???
Sent from my GT-S5282 using XDA Free mobile app
grdharsh19 said:
Hey Please provide me the link of cm 10.2 and is all the problems and bugs that we faced in cm 10 for our device is now fixed...???
Sent from my GT-S5282 using XDA Free mobile app
Click to expand...
Click to collapse
No they aren't fixed.
And CM10.2 is very unstable, systemUI force closes everytime, making it impossible to explore what's left of it.
Ohk..... and thanks for your effort ..... and we will wait for the fixes..... i know you can do this....!!!!
Sent from my GT-S5282 using XDA Free mobile app