Verizon Galaxy Tab 10.1 4G LTE (sch-i905)
So I got this tablet from a friend who said it was bricked, said I could have it if I got it working. So I plug it in and it turns on no problem, strange. wiped tablet and added a couple apps. Got busy at work and the tablet drain power. That's when I got to see it bricked, but still not sure why it booted for a bit for me.
Symptoms:
Boots to Samsung Galaxy Tab 10.1 splash screen (not the animated one after), sits there for ever.
Boots to Odin update mode
When booting to recovery I get a blank, back lit screen and nothing ever.
I've tried:
-Pushing clockwork mode to fix recovery
-I've had a hell of a time finding stock firmware for some reason (it isn't on sammobile), but I did find one eventually. I pushed it to the tablet via Odin, and it was successful, but rebooted to blank black back-lit screen. Have to hard boot and hold power buttun until I see the splash screen to get that far. I followed the guide on rootzwiki reposted on icsforums - www icsforums com/forum/showthread / 13525 (sorry new member can't post links)
-Followed another guide that involved draining battery completely, no go.
I don't care what firmware I end up on, or if I can use LTE (I won't anyway)
I'm a network engineer so I'm tech savy, but not heavy on Android OS. I'm looking for anything else I can try. I saw another method involving heimdall suite, but can't find the files for my model.
Any help or guidance is greatly appreciated.
@Juicebox4242
I had this problem on my gt-p7510...
What I ended up doing was wiping my sdcard..I must have had something corrupt in my file system or a kernel issue( still not sure which )..
Since you have no recovery..I think you can use odin to repartition ( I CAN NOT STRESS ENOUGH THAT THIS IS JUST A GUESS )..I have not tried it..but i will search after this post to confirm..I also believe there is a way using ADB..again not sure..
I just wanted to post this so you would know somebody was looking and to maybe give you a couple ideas to follow up on...I'll search around and see what I find
Edit...I believe ADB will only work with usb debugging checked...But you can flash a stock rom in odin with re-partition checked..you need a .pit file....I think...
Edit...Here is a link to a stock rom thread for you're device..It seems to have helped a couple people with their soft-bricked devices..just follow directions in OP..no repartition checked. I cant even find a .pit file to do a re-partition with for you're device..
http://forum.xda-developers.com/showthread.php?t=1342995 Let me know if this works for you..
Thanks for the post!! Really appreciate it.
That firmware is the one I found in the end and tried. Odin pushes it ok, but then still doesn't boot. In fact after pushing that firmware it boots to backlit blank screen, but when hard reset boots to splash screen.
I tried a pit file I found that I thought was the right one, but it failed when I used that so it must have been wrong.
Juicebox4242 said:
Thanks for the post!! Really appreciate it.
That firmware is the one I found in the end and tried. Odin pushes it ok, but then still doesn't boot. In fact after pushing that firmware it boots to backlit blank screen, but when hard reset boots to splash screen.
I tried a pit file I found that I thought was the right one, but it failed when I used that so it must have been wrong.
Click to expand...
Click to collapse
I have the exact same problem as you, except sometimes I can't my tablet to boot. I know it is a software problem because before I was messing with recovery yesterday, everything was working just fine. All I wanted to do was restore to factory settings and instead ended up bricking the device... If you find / know the answer, please do share.
Juicebox4242 said:
Verizon Galaxy Tab 10.1 4G LTE (sch-i905)
So I got this tablet from a friend who said it was bricked, said I could have it if I got it working. So I plug it in and it turns on no problem, strange. wiped tablet and added a couple apps. Got busy at work and the tablet drain power. That's when I got to see it bricked, but still not sure why it booted for a bit for me.
Symptoms:
Boots to Samsung Galaxy Tab 10.1 splash screen (not the animated one after), sits there for ever.
Boots to Odin update mode
When booting to recovery I get a blank, back lit screen and nothing ever.
I've tried:
-Pushing clockwork mode to fix recovery
-I've had a hell of a time finding stock firmware for some reason (it isn't on sammobile), but I did find one eventually. I pushed it to the tablet via Odin, and it was successful, but rebooted to blank black back-lit screen. Have to hard boot and hold power buttun until I see the splash screen to get that far. I followed the guide on rootzwiki reposted on icsforums - www icsforums com/forum/showthread / 13525 (sorry new member can't post links)
-Followed another guide that involved draining battery completely, no go.
I don't care what firmware I end up on, or if I can use LTE (I won't anyway)
I'm a network engineer so I'm tech savy, but not heavy on Android OS. I'm looking for anything else I can try. I saw another method involving heimdall suite, but can't find the files for my model.
Any help or guidance is greatly appreciated.
Click to expand...
Click to collapse
Did you ever get this fixed? I've had the same problem for months. I just gave up and put it away. I recently fixed a Galaxy Tab 2 and now I want to see if anyone else was able to fix this i905 not booting issue.
did anyone know the solution of this question
Related
I've tried to look for this problem and haven't found anything similar. If it's already been addressed please direct me to the previous thread, if this is in the wrong place please move it.
I rooted my Galaxy S II a while ago and it's been working great. I wanted to try Cyanogen mod 7 and so I followed the instructions on their website. Trying to use ROM manager gave me a weird error message telling me that there was an invalid signature or something, despite toggling everything and wiping the cache to turn it off. So I followed the "method via recovery" instructions. I did everything exactly as it is there, including the Google apps stuff, and it all seemed to work perfectly. Then I rebooted it hoping for it to boot into CM7, and instead, when it turns on it goes to the screen saying Samsung Galaxy S II with the yellow triangle underneath, and stays there. Every time it turn it on it goes to that screen and doesn't change. It's now been like that for half an hour. I can start it up into download mode, and I've tried flashing zImage to it again, but no change.
I have a NANDroid backup (it's backed up with CWM anyway), and I've copied the backup to my computer, but I have no idea how to apply it when the bloody thing won't turn on.
I'm using Linux with Heimdall (the cross-platform Odin clone).
Please help me. Unfortunately I have no internet in my flat so I won't be able to see any advice until tomorrow unless it;s given in the next ten minutes. God I really hope the thing's ok.
Hi
Do you have jigg? ( if you don't have it buy it from ebay or ask some friend of you )
With jigg you can enter download mode and then flash the stock rom.
Pull battery, wait 10s, then boot while holding power+vol-up+home. This should get you in recovery. Then restore nandroid.
Sent from my Transformer TF101 using xda premium
TheGhost1233 said:
Pull battery, wait 10s, then boot while holding power+vol-up+home. This should get you in recovery. Then restore nandroid.
Click to expand...
Click to collapse
I can't believe it was this simple, I knew power+vol-down+home got tme to downloading but I didn't know that got me into recovery. Everything's recovered now.
Thank you Dutch people!
It seems that I have bricked my SGP 5.0 (US). It started with a bootloop problem, and after trying various methods discovered in the forums, I am now left with a SGP that refuses to show anything other than the yellow "Downloading" screen.
I've tried flashing it with Eryigit's ROM (as well as a supposedly stock ROM) using Odin. I get a PASS from Odin, but when it resets it just goes back to the download screen.
I've found similar threads, but so far they either 1) haven't worked or 2) have broken links for one or more of the files to be downloaded. If I'm missing one that would fix my situation, please point me in the right direction.
Is there anything I can do to make my player usable again?
Problem fixed!
Apparently I needed to reflash the bootloader, and it booted into recovery mode. After that, I chose the wipe/factory reset, rebooted, and voila!
Even though no one responded to this thread, thanks to all those who posted before, as I wouldn't have been able to revive it without those posts. (I'll thank your posts when I have a chance--busy setting up my SGP at the moment. )
U need flash "low" firmware, try this : http://narod.ru/disk/39324223001/CODE_G70XEKP2_CL642455_REV01_user_low_ship_HOME.tar.md5.html
Hey, so I was trying to flash my friend's s3, and apparently, I did something wrong which got me stuck up at odin mode.
Initially, I could hold the vol up + home + power button to go to recovery, but now, even that won't work as it would just show me
Samsung's logo and a red exclamation mark on top left corner.
I've downloaded the firmware stock and tried to flash it using odin however it just won't work.
It says "NAND Write Start!!!" and it just stops there (stuck forever). It should (as I know it) show a progress bar on my android and
on it's interface to tell how much it has been done, but as soon as I start, the progress bar instantly fills up (on my android, the blue line)
and its just stuck there.
I've tried to take out the battery, clear cache/reset factory, take out sd and sim. But it simply won't work.
It's just stuck on "Downloading....do not turn of target!!!"
I cannot even get the flash counter to reset (I don't know how, since I can only open up odin mode)
counter: 4
binary: yes
Currently, I don't even know if it's suppose to be charging or the battery is just draining out.
Region for this phone is Turkey.
Yes I've also unrooted the phone using KingoRoot (previously, when it could go into recovery) but no luck.
Note: I have searched other threads on this forum but I cannot get anywhere around even close to fix my device.
It's soft-bricked (I assume, of course it is).
Any idea how to fix this?
Odin Screenshot (since it's my first post, it won't allow me to post outside links, sigh,):
http: // i.imgur .com/eBVZ3NN . png
^^ Just been stuck there....
Meanwhile on my android, it just shows a full-blue progress bar. And that downloading do not turn of target.
UPDATE:
THE PROBLEM HAS BEEN RESOLVED. I DOWNLOADED A CUSTOM FIRMWARE, (LUCKILY, CLOCKWORK MOD WORKED, JUST HAD TO WAIT AFTER GOING TO RECOVER)
FLASHED IT THROUGH THERE, WAITED FOR IT TO INSTALL, RESTART. BAM.
Did the 'something wrong' include flashing a firmware for another model?
What does the model number in download mode read?
You can try the rescue firmware, search general forum,.
Yeah, wrong firmware I suppose
boomboomer said:
Did the 'something wrong' include flashing a firmware for another model?
What does the model number in download mode read?
You can try the rescue firmware, search general forum,.
Click to expand...
Click to collapse
I was seeing this tutorial on how to install KitKat (4.4.4) on Galaxy S3. I must've made a mistake while trying to do so.
In other words, yes, flashing a firmware for another model.
You have a hard brick, sorry.
Yeah, no.
boomboomer said:
You have a hard brick, sorry.
Click to expand...
Click to collapse
No I don't lol. The problem has been solved anyway.
Im' glad to see you didn't give up on this, and came back to let us know what was wrong
I know this could be seen as off-topic, but the reality of devices becoming bricked isn't really possible luckily, it just takes longer to get around sometimes. If the item is worth fixing, then I always say keep at it, because I've never had an android device stay stuck so far. The only thing that really went nuts and refused to work, were 2 of the Iconia A500 tablets that lost access to their memory - but this is a common hardware fault as the RAM chips break away and need reflowing before you can even format the internal memory (it cant even see the SD cards either because the RAM comes and goes - same idea as plugging/unplugging a USB drive in Windows/Linux - it just doesn't know what to believe lol).
Great forum by the way, there's so much great information on here I get lost reading
Hello. I have a 2012 Samsung Tab 2 that was branded for ATT and the model number is SGH 1497. It has been in a drawer for a year and I never use it but I thought I would experiment with it and try to install the Marshmellow Rom even though I am a noob at this stuff. My first problem was that I saw nothing for my version SGH 1497 but I did read on a forum that the Rom 5113 would work for that model. After going through a lot of websites I finally found one that seemed pretty easy and the root process went perfectly for me, no issues at all. I then followed instructions and downloaded the needed files and moved them onto my tablet and all was going well. I was then instructed to boot into recovery mode and that is where my troubles started. I believe it said to hold power and volume down key. Recovery mode would pop onto the screen but then vanish and it would never go into it. So I did more reading and someone had posted that I needed to download the toolkit and re-install a new recovery mode. So I did that just fine and still the same thing happened. I then tried 2-3 more of the other recovery modes and the same thing happened. At that time the tablet would still boot normally. So then I did something else and now my tablet wont turn on anymore. If I push power enough times the Samsung logo will pop onto the screen and then it goes away and that's it. It will turn on to download mode but that is it. Nothing else. Im not upset because I knew this could happen but I surely should have came here first. Is there anything I can do to get this thing back working again or is it hopeless??
Thank you for any help and advice.
Thomas
I was able to fix it by finding the exact same firmware that ATT put on this tablet and then using Odin to flash it. Works fine and is rooted.
Does anyone know of a custom rom that will work on this model sgh 1497??
Thanks.
Ok, first up I know there are many posts out there about this issue because I've looked at most of them and tried them so please bear with me.
I have a Samsung Galaxy GT-N8010, about 4 years old. I have never rooted or done anything to the firmware in all that time except OTA updates & the occasional factory reset to clean things up.
Couple of months ago it was on, i had been using it and put it down and when i came back it was on the Samsung logo screen and has been ever since.
Since i could get into the download page even though it was already bricked I figured i'd try rooting to see if i could fix the problem. Now possibly i should have attempted to get into recovery mode first but I attempted to install CWM (as per posts here). It appeared to install fine. But no recovery partition, screen blinks and goes back to the logo.
I've tried flashing stock firmware, TWRP, CWM - all 'appear' to install successfully according to ODIN, but nothing changes, still stuck on the logo screen.
So does this sound like a hardware issue or am i missing something? The Tab A 10.1 with s-pen looks great, would be a perfect replacement, but is not available in NL
Thanks guys (& gals)
Darren