{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features
* included in this KERNEL
* Before flashing it! YOU are choosing to make these modifications,
* and if you point the finger at me for messing up your device,
* I will point you out to this message ! ! !
*
*/
By using this kernelyou agree with the above terms!
I build this kernel from source.
It's all development, beware ! ! !
There can be bugs, you tell me!
Code:
V0.0.3
CPU Freq scaling
- disabled CPU frequency limit API
V0.0.2
Power management
CPU Freq scaling
- Default gov= ondemand
- enabled intel gov
- enabled conservative gov
File system
DOS/FAT/NT file systems
- NTFS file system support
- NTS write support
- enabled Network File Systems
- enabled CIFS support
- CIFS extended attributes
- CIFS POSIX Extensions
BINDROID KERNEL P5210 V0.0.1
Stock kernel build from source.
Added to ramdsik
- USB Debugging enabled, and so also Developers options in "Settings"
- USB Config: MTP, ADB
- init.d Support
Added to zip
- USB Charge (Not visable on stock unmodified roms) but working.
Download the latest kernel
Add it to your SDcard
Boot in to Recovery
Flash the Kernel you downloaded
Reboot
Enjoy
I'm not a kernel guru, but able to get by...
If you want to help, let me know
DONATIONS
Thanks, all is much appriciated
My source on BitBucket
Q: Can i flash this kernel on my P52XX?
A: Try it as I can't test it on other Tabs, make sure you have a stock kernel to revert back if you have issues
Can you repack it with root su files. After flash kernel Rom will be Rooted :laugh:
binh24 said:
Can you repack it with root su files. After flash kernel Rom will be Rooted :laugh:
Click to expand...
Click to collapse
ROOT.zip is in my CWM thread
binh24 said:
Can you repack it with root su files. After flash kernel Rom will be Rooted :laugh:
Click to expand...
Click to collapse
Correct me if i am wrong but I thought the rooting was done at rom level and thekernel was what everything sits/works on.
Updated with some extras in it
DutchDanny said:
Updated with some extras in it
Click to expand...
Click to collapse
Hi DutchDanny, noob question, can this Kernel work on GT3 8 (310)?
Thanks for your work.
Don't think so. If you had a 10" inch ...I would say... Try it.
Send via my BinDroided HTC ONE
DutchDanny said:
Don't think so. If you had a 10" inch ...I would say... Try it.
Send via my BinDroided HTC ONE
Click to expand...
Click to collapse
Hi DutchDanny, I'm a total noob but like to help testing the kernel can i back up my current kernel incase something goes wrong and I can recover it? Thanks
You can backup your whole tablet in cwm including your kernel
Send via my BinDroided HTC ONE
Don't forget to publish your sources - GPL and all that
trevd said:
Don't forget to publish your sources - GPL and all that
Click to expand...
Click to collapse
His source link is in post 2.
Sent from my SM-T210R using xda app-developers app
gr8nole said:
His source link is in post 2.
Sent from my SM-T210R using xda app-developers app
Click to expand...
Click to collapse
Yes I see it, In fact I was looking at the repo yesterday LOL .... Just keeping us all honest
LoL
Send via my BinDroided HTC ONE
Updated the kernel with some minor adjustments
Hello DutchDanny, nice work !
Is it possible to use OTG while charging the tab 3 with the Y OTG cable with your kernel ?
Thanx
LeDuke
Any way to have ext2 support?
Verstuurd van mijn GT-P5210 met Tapatalk
download?
im sorry but i dont see the download if anyone has it can you pm or somthing id really like this kernel
mylifeandroid said:
im sorry but i dont see the download if anyone has it can you pm or somthing id really like this kernel
Click to expand...
Click to collapse
DutchDanny Bindroid still at but it been said he is not working on it anymore
Code:
http://roms.bindroid.com/
in particular
Code:
http://roms.bindroid.com/component/jdownloads/viewcategory/4-galaxy-tab3-p5210?Itemid=0
I am a fan of his early work. Thanks to him again.
Just a comment of my own about his kernel.
Samsung stock roms do not allow to charge while hook to the PC!
There is a reason for it as I understand. When your battery is empty the load of your Tablet can approach 2 Amps !!!!
Your PC's USB Port is designed for a maximum load of only .5 A.
So as you see an empty battery in an tablet could overwhelm the USB Port by trying to load 4 times more (2/.5) than the available .5. This could put unnecessary overload in our USB Port that could result in unnecessary heat stress in our PC. ****
I have test Bindroid V3.0 and I personally like the rom. Due to my personal opinion, I have make sure that my tablet was fully charge or close when I did plug it to my Laptop.
*****Edited to prevent disagreement due to my personal opinion with my buddy MobiMikes. The original sentence was:
So as you see an empty battery can overwhelm the USB Port by 4 times more (2/.5)!!! This can burn your PC!!
Click to expand...
Click to collapse
Sorry MobiMikes
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[COLOR="Purple"]#include <std_disclaimer.h>[/COLOR]
[COLOR="Navy"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/COLOR]
This thread is opened to keep the LegacyXperia development threads clean. Please post any non-development related questions in this thread.
This is an unofficial build of CM10.1.
This is an attempt to stay close to official cm10.1 and not make crazy hacks to make things working.
This is a pure CM build, only contains official CM features. I will not add any other external feature/app/etc.
LegacyXperia is intended for advanced users only. All the info is in the Wiki. If you still have questions for basic things like "how to install the ROM", better don't use this ROM.
For an up-to date working/not working list, bug tracker, useful guides & FAQ, visit our website:
http://legacyxperia.github.io
FAQ
Frequently asked questions:
Check this wiki page
Bug tracker
How to report issues to the bug tracker:
Check this wiki page
Battery drain
Hey.
In last nightly when i disabled ''back up my data'' under Settings/Back up & reset, the heavy battery drain was gone.
I also disabled auto sync options.
ya I have auto sync always disabled and have totally normal battery drain. 2 days of normal using about
---------- Post added at 01:56 PM ---------- Previous post was at 01:52 PM ----------
Hey have small question.
There was in changelog some time ago SELINuX part 1 , part 2, part 3. So as I understand you started implementing. So why it is not enabled?? It is hard to implement or impossible to implement nd you left this??
Just my curiosity.
lsander said:
ya I have auto sync always disabled and have totally normal battery drain. 2 days of normal using about
---------- Post added at 01:56 PM ---------- Previous post was at 01:52 PM ----------
Hey have small question.
There was in changelog some time ago SELINuX part 1 , part 2, part 3. So as I understand you started implementing. So why it is not enabled?? It is hard to implement or impossible to implement nd you left this??
Just my curiosity.
Click to expand...
Click to collapse
From the FAQ:
Q: Why phone crash by repeatedly tapping the SELinux-status in the "About phone" settings menu?
A: Because SELinux support is not complete for our devices yet. It is enabled in kernel & userspace but it's missing the device specific configuration.
Why is this a unofficial port?
LegacyXperia 10.1 is pretty much bugfree compared to the official CM10.
It should be official in my opinion.
There are many people who don't know that CM10.1 is available for their devices.
it is unoffical because is not released from cmteam and is not available on their website. CM9 or CM10 were officiall as supported by official cm team. That is why. Correct me if Im wrong
flash boot.img
Anyway to flash boot.img without flashtool or fastboot ..
i am on windows 8.1 & fastboot is not working :/
sidharth.gtm said:
Anyway to flash boot.img without flashtool or fastboot ..
i am on windows 8.1 & fastboot is not working :/
Click to expand...
Click to collapse
No that's impossible
You could install Ubuntu using Wubi next to windows or just use a friend's PC
Sent from my Nexus 4 running Android 4.3
fastboot
sidharth.gtm said:
Anyway to flash boot.img without flashtool or fastboot ..
i am on windows 8.1 & fastboot is not working :/
Click to expand...
Click to collapse
I am on windows 8 & managed to install fastboot drivers by this link.
http://forum.xda-developers.com/showthread.php?t=2447283 :good:
lsander said:
it is unoffical because is not released from cmteam and is not available on their website. CM9 or CM10 were officiall as supported by official cm team. That is why. Correct me if Im wrong
Click to expand...
Click to collapse
This official cm team you mentioned is FreeXperiaProject, and they aren't supporting our devices anymore.
So why isn't LegacyXperia official now? (newer, better, faster)
In the cyanogenmod wiki they say we need to encourage unofficial porters to make their ports official.
Is there anything I am missing here?
LegacyXperia is great, so please make it official
sathikg said:
I am on windows 8 & managed to install fastboot drivers by this link.
http://forum.xda-developers.com/showthread.php?t=2447283 :good:
Click to expand...
Click to collapse
on 8.1 it doesn't work... any of win8 method doesn't work... probably 8.1 needs new fastboot drivers
is safe to unninstal equalizer using root unninstaler?
srry for my bad english
CarloVolpi said:
is safe to unninstal equalizer using root unninstaler?
srry for my bad english
Click to expand...
Click to collapse
If you're not using it, yes. But some sound settings that make reference to it can give FC later. Nothing to worry about. I did this in the past and the phone works fine.
Download the kernel
Is there any way to download only the kernel??
etisalatbanda said:
Is there any way to download only the kernel??
Click to expand...
Click to collapse
yes.
1.get the roms zip's download link. (where u want kernel from)
2.go here & paste link http://www.wobzip.org/
3. download only kernel
Back when I'm using ICS based rom, it work just fine. But when I changed to CM10.1 the Media Go doesn't recognize my Xperia Active anymore. Anyone know how to make it support again without change rom? Maybe something to do with build.prop?
Thanks.
Hi,
just one question - why one nightly comes after another? Shouldn't there be some release ver. instead?
toster88 said:
Hi,
just one question - why one nightly comes after another? Shouldn't there be some release ver. instead?
Click to expand...
Click to collapse
What's difference between release versions and nightly build dates? None. Build dates are used as version number
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lollipop Kernels
Code:
#include <std_disclaimer.h>
#include <respect.h>
#include <courtesy.h>
/*
*
* We are not responsible for your device.
* You alone take the inital risk by flashing files to your device.
* I test all kernels on my development device before I release them.
* These kernels are made in my spare time, with that being said , Please respect that.
* Please treat others with repect in this thread.
* You were the new guy or girl at one time or another.
* Please help and instruct others.
*/
Downloads
@ΠΣΘ Adrenaline Rom
Sense 5.0.1 Powerhouse kernel
Also if you are applying settings on boot in your favorite kernel app, Make sure you clear app cache before flashing other wise you might not boot.
Changlog and source link in post #2
Happy flashing!
Changelog:
Powerhouse:
Voltage control
OC to 2.5Ghz
UC to 2.68Ghz
GPU OC to 650Mhz
Sweep2sleep
Ondemandplus CPU governor
Simpleondemand GPU governor
I/O schedulers added: sio, vr, fiops and bfq
Kexec-hardboot for MultiROM support
** Aside from the commits above there are various improvments to the code which can be found in my source **
Source
Nicely done:good:
TonyStark said:
Nicely done:good:
Click to expand...
Click to collapse
thank you sir, for all you done.
Thanks for bringing more kernels for Lollipop
Hey all,
I know this is the Lollipop Thread but I see the other one barely had any use since September of 2014. I was hoping someone could point me in the right direction to download this kernel on the "old" 4.4.4 KK for CM11 on the HTC One M8 Verizon variant. I am not using MultiROM but may in the future. What are people using as their settings? The Furnace Kernel I'm using doesn't allow for MinFree Control. I could edit that manually but I'm not well versed in that. Thanks!
Always dig having more kernels to choose from!
Em....My device is M8tl (China market )I really want someone can make a GPE or CM kernel FOR US...All users of M8tl will be thankful...
hellobbn said:
Em....My device is M8tl (China market )I really want someone can make a GPE or CM kernel FOR US...All users of M8tl will be thankful...
Click to expand...
Click to collapse
Does GPE not work with the existing kernels? It should, I think.
CM is a different story, but some of the custom builds *might* support it.
Captain_Throwback said:
Does GPE not work with the existing kernels? It should, I think.
CM is a different story, but some of the custom builds *might* support it.
Click to expand...
Click to collapse
I have tried to flash some CM based ROMs as they doesn't work on my device because CM does not support it...I am now trying to flash the GPE kernel .reply soon
---------- Post added at 12:55 PM ---------- Previous post was at 12:41 PM ----------
Captain_Throwback said:
Does GPE not work with the existing kernels? It should, I think.
CM is a different story, but some of the custom builds *might* support it.
Click to expand...
Click to collapse
I have tried but failed...I think maybe it's because of the kernel souce...and the firmware....And the GPE rom on my device is ported by another developer...
I'm runnning digital high gpe and cm 12 the only thing that's different is the ramdisk
Evolutionmods said:
I'm runnning digital high gpe and cm 12 the only thing that's different is the ramdisk
Click to expand...
Click to collapse
I wanna...can you make a kernel for my device or maybe you can teach me the way? Huge thanks
Sent from my HTC M8t using XDA Free mobile app
hellobbn said:
I wanna...can you make a kernel for my device or maybe you can teach me the way? Huge thanks
Sent from my HTC M8t using XDA Free mobile app
Click to expand...
Click to collapse
First result with Google-
http://forum.xda-developers.com/showthread.php?t=1748297
http://www.xda-developers.com/compile-kernel-tutorial/
@Evolutionmods sorry for the off topic reply, nice work btw, thanks for the new options.
Evolutionmods said:
I'm runnning digital high gpe and cm 12 the only thing that's different is the ramdisk
Click to expand...
Click to collapse
So are you saying the GPE kernel works on CM? I'll have to see if my kernel works on CM then, since I use AnyKernel, it uses the ramdisk from the ROM. Unless that's not what you meant.
Captain_Throwback said:
So are you saying the GPE kernel works on CM? I'll have to see if my kernel works on CM then, since I use AnyKernel, it uses the ramdisk from the ROM. Unless that's not what you meant.
Click to expand...
Click to collapse
yes, the source works on both. just remove the pronto driver from being built into the kernel. for some reason i couldnt get the stock driver to load. once i removed it being built in, it grabbed the stock module
Evolutionmods said:
yes, the source works on both. just remove the pronto driver from being built into the kernel. for some reason i couldnt get the stock driver to load. once i removed it being built in, it grabbed the stock module
Click to expand...
Click to collapse
There's no pronto driver in GPE source .
Captain_Throwback said:
There's no pronto driver in GPE source .
Click to expand...
Click to collapse
what i meant was that if you had the commit to add cafs pronto/prima into the kernel like cm does then you just have to remove it from being built in. but looking at your source, it should just work. no problem.
Evolutionmods said:
what i meant was that is you had the commit to add cafs pronto/prima into the kernel like cm does then you just have to remove it from being built in. but looking at your source, it should just work. no problem.
Click to expand...
Click to collapse
Ah, okay. Cool, thanks. I'll give that a shot.
I am using the CM Powerhouse on CM12 Sprint, working well, thanks for the good work, nice to see more AOSP kernel choices.
Thanks bud! Glad to see the other variants are good
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
General:
Cyanogenmod 11 for Samsung Galaxy Ace 4 (SM-G313HU), deodexed. Note: Google apps are not included. Get them here.
What works:
Audio
Bluetooth (file transfer works, report if headset/mice/keyboard/whatever does(not))
Calls
MultiSIM
Camera
Data connection
Text messages
USB (Adb, MTP, PTP, UMS, Tethering, etc etc)
Wifi
Wifi Tethering
What does not:
FM Radio (removed from the firmware)
Bugs:
First startup lags alot (yes, it still does).
Watching some videos on Facebook crashes the app. Disable automatic video playback from settings
Download:
Latest build (20151209)
Screenies:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sources:
Device tree
Kernel repo
Please report any bugs to this thread.
Thanks alot to TheNikiz for a device tree and helping me with some thingies.
Does it work for Sansumg Galaxy Ace 4 LTE (SM-G313MU)?
Arrow_Strider said:
Does it work for Sansumg Galaxy Ace 4 LTE (SM-G313MU)?
Click to expand...
Click to collapse
SM-G313HU and SM-G313MU have completely different hardware (different brand of processors), so it will not work.
Thanks for your answer.
Can you please point me to any rom that would work on SM-G313MU? Official or not. It´s hard to find yet...
Arrow_Strider said:
Thanks for your answer.
Can you please point me to any rom that would work on SM-G313MU? Official or not. It´s hard to find yet...
Click to expand...
Click to collapse
There isn't any atm. The best you can do now is root your phone and remove stock bloatware.
Any word on the G316M? It's just plain Ace 4 as far as I know. No idea about the chipset though.
Silly samsung releasing tons of variants of the same phone.
Pixelado said:
Any word on the G316M? It's just plain Ace 4 as far as I know. No idea about the chipset though.
Silly samsung releasing tons of variants of the same phone.
Click to expand...
Click to collapse
same as SM-G313MU i guess
check output of cat /proc/cpuinfo in terminal (that "file" displays info of chipset)
itigr said:
same as SM-G313MU i guess
check output of cat /proc/cpuinfo in terminal (that "file" displays info of chipset)
Click to expand...
Click to collapse
Man, i just CAN´T STAND this stock SM-G313MU rom anymore. Even being rooted, this damn rom can´t understand what is external sd card and what is internal memory. I´m SUFFERING day by day trying to move things to sd card just to keep this sluggish rom running.
Call_UI suffers badly and craches at every call.
It has so many problems that i´ll take forever just to list them all here.
I´m feeling helpless without cyanogen mod on my G313MU phone.
Got a whisper on the wind about a rom convertion program that compiles a custom cyanogen mod rom by comparing original firmware and custon ones, but the guy just took it out of circulation due to bugs and has no time on his hands anymore to update the program.
I guess i should begin walking the long road of learning android development.
For me everything mentioned works expect the Bluetooth,SM313HU.
who flash this rom?
itigr said:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
General:
Cyanogenmod 11 for Samsung Galaxy Ace 4 (SM-G313HU), deodexed. Note: Google apps are not included. Get them here.
What works:
Audio
Bluetooth
Calls
MultiSIM
Camera
Data connection
Text messages
USB (Adb, MTP, PTP, UMS, Tethering, etc etc)
Wifi
Wifi Tethering
What does not:
FM Radio
Offline charger
Bugs:
First startup lags alot.
Some codec issues. (Might not play all file formats. Can't record video or watch recorded videos)
Download:
Latest build (20150828)
Screenies:
View attachment 3456334View attachment 3456335View attachment 3456336View attachment 3456337
Sources:
Device tree
Kernel can be found on the samsung opensource release centre
Please report any bugs to this thread.
Thanks alot to TheNikiz for a device tree and helping me with some thingies.
Click to expand...
Click to collapse
hi
thanx for your rom
but How flash it? Please put a custom recovery or Introduce a custom recovery.
Edwin Hamal, that's strange, BT works perfectly for me, could you provide adb logcat output?
Arrow_Strider, That's really pain in the ass to at least get device to boot. I would try to compile CM for this phone, but i really have no time now :<
if you are about extsdcard write permissions, those can be easily fixed.
CallerUI never crashed when i was using stock, weird.
benis4, here's a philz recovery that i compiled recently for flashing using odin, ik i should have made topic for this one.
Bluetooth is working fine problems now is the codecs and also fb freezes it and device itself freezes from time to time!
itigr said:
Edwin Hamal, that's strange, BT works perfectly for me, could you provide adb logcat output?
Arrow_Strider, That's really pain in the ass to at least get device to boot. I would try to compile CM for this phone, but i really have no time now :<
if you are about extsdcard write permissions, those can be easily fixed.
CallerUI never crashed when i was using stock, weird.
benis4, here's a philz recovery that i compiled recently for flashing using odin, ik i should have made topic for this one.
Click to expand...
Click to collapse
Lahdenpohja, BLESS YOU! You´re our only hope now...
Lets just hope you got some spare time as soon as you can.
We´re in dire need.
Thanks!
why the kernel source not included on your device tree?
Sent from my GT-I9300 using XDA Premium 4 mobile app
bangdes said:
why the kernel source not included on your device tree?
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It possibly uses the stock kernel. Here are the kernel sources: https://github.com/TheNikiz/android_kernel_samsung_hawaii. Use this config instead (in ./arch/arm/configs/): http://pastebin.com/DRgsaHHJ
Any chances porting this rom to SM-G313HZ?
doesntexits said:
Any chances porting this rom to SM-G313HZ?
Click to expand...
Click to collapse
It is possible, but someone that has to do the porting.. I would do it if I had the phone to test it with. (And a faster computer..) Even though the model number is similar, it has completely different hardware. As far as I know, SM-G313HU is the only phone I could actually develop on for some extent, because it is virtually the same as my phone. (SM-G313HN, single SIM with NFC)
Nikiz said:
It is possible, but someone that has to do the porting.. I would do it if I had the phone to test it with. (And a faster computer..) Even though the model number is similar, it has completely different hardware. As far as I know, SM-G313HU is the only phone I could actually develop on for some extent, because it is virtually the same as my phone. (SM-G313HN, single SIM with NFC)
Click to expand...
Click to collapse
Yes, there is
http://forum.xda-developers.com/android/development/rom-cyanogenmod-11-samsung-galaxy-sm-t3101342
But there's a problem with libhardware_legacy of this rom so wifi doesn't work
How do you fix internal and external storage on your rom?
Edit: This rom has been built by @cleverior.ipul
Does this ROM work for Sm-g357fz
doesntexits said:
Yes, there is
http://forum.xda-developers.com/android/development/rom-cyanogenmod-11-samsung-galaxy-sm-t3101342
But there's a problem with libhardware_legacy of this rom so wifi doesn't work
How do you fix internal and external storage on your rom?
Edit: This rom has been built by @cleverior.ipul
Click to expand...
Click to collapse
I modified the init.{device_name}.rc file in boot.img to get the storage to work. It varies on different phones. I will take a look when I get home.
---------- Post added at 02:15 PM ---------- Previous post was at 01:56 PM ----------
janstetka said:
Does this ROM work for Sm-g357fz
Click to expand...
Click to collapse
Nope.
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
Click to expand...
Click to collapse
The kernel is based off latest sources from samsung and is compatible for samsung galaxy core prime G360T1 (qualcomm). Over stock kernel this kernel possesses following enhancements
Insecured
adb runnable as root
init.d support
Automatic busybox installation
Governors enabled: Performance, interactive
ARM: Removed various debug traces
Added Intelli Thermal v3.0 (Thanks to Faux123)
Added bunch of TCP Congestion Controls
Enable CPU Boost
DOWNLOAD
INSTRUCTIONS
- just flash it through TWRP in boot partition
Source
https://github.com/MSM8916-DEV/android_kernel_samsung_coreprimelte
I also create a telegram testers group
link -: https://telegram.me/joinchat/C7gUxwlncwV4k3j6XB51GA
Reserved
So far, from what I've tested, Wi-Fi doesn't work.
xRaZeR_FuZioNx said:
So far, from what I've tested, Wi-Fi doesn't work.
Click to expand...
Click to collapse
What happens if you flash the stock modem stuff?
https://mega.nz/#!jFUiyA7a!6Jak93UubZOMEVYXRjGTaNrlc6DRWwpwrNBN5LEuYjA
Dreamstar said:
* Your warranty is now void...
Click to expand...
Click to collapse
Dreamstar said:
Reserved
Click to expand...
Click to collapse
Still can't see the black text of the first two posts on my black themed Tapatalk. Definitely not a problem that affects the majority, but it may be confusing to some as the post just looks blank.
Sent from my SM-G360T1 using Tapatalk
Is this more modded than the trapkernel?
Would be AWESOME with a lil OC thrown in.
As per norm all is worshippingly appreciated.
Great
Awsome Kernel i ever seen Thanks
Not to come off as a ree ree,but I keep getting md5 binaries error. Is it me?It has to be me,right? I bet it's me.
xRaZeR_FuZioNx said:
So far, from what I've tested, Wi-Fi doesn't work.
Click to expand...
Click to collapse
Just tried this again today. You're right. Wi-Fi will not switch on with Vegito.
Sent from my SM-G360T1 using Tapatalk
Update:
== Added Intelli Thermal v3.0 by faux123
== Added lots of TCP Congestion Controls.
== Added CPU Boost !
Tested this today. Here was the before and after results.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G360T1 using Tapatalk
Dreamstar said:
The kernel is based off latest sources from samsung and is compatible for samsung galaxy core prime G360T1 (qualcomm). Over stock kernel this kernel possesses following enhancements
[*]Insecured
[*]adb runnable as root
[*]init.d support
[*]Automatic busybox installation
[*]Reduce logger device RAM allocation to 128K
[*]Governors enabled: Performance, interactive
[*]ARM: Removed various debug traces
[*]Added Intelli Thermal v3.0 (Thanks to Faux123)
[*]Added bunch of TCP Congestion Controls.
[*]Enable CPU Boost
Add GPU speed config support
DOWNLOAD
INSTRUCTIONS
- just flash it through TWRP in boot partition
Source
https://github.com/MSM8916-DEV/android_kernel_samsung_coreprimelte
Click to expand...
Click to collapse
Is this kernel set to permissive
wifi working now?
Gio Lokks said:
Is this kernel set to permissive
Click to expand...
Click to collapse
Yes.
WaxysDargle said:
wifi working now?
Click to expand...
Click to collapse
I tested this kernel a little while ago and don't recall having any problems with wifi. You can test it easily though by flashing it. It's always just a flash back to Trapkernel if you run into any issues.
bogarty said:
Yes.
I tested this kernel a little while ago and don't recall having any problems with wifi. You can test it easily though by flashing it. It's always just a flash back to Trapkernel if you run into any issues.
Click to expand...
Click to collapse
actually, i did try it and im soft-bricked now. tried flashing the previous boot.img and still wont boot. gotta figure this out before trying it again.
thanks for the help!
WaxysDargle said:
actually, i did try it and im soft-bricked now. tried flashing the previous boot.img and still wont boot. gotta figure this out before trying it again.
thanks for the help!
Click to expand...
Click to collapse
Hmm...Can you tell me exactly what you did? To go back BTW you can just flash Trapkernel in the AP slot of Odin.
bogarty said:
Hmm...Can you tell me exactly what you did? To go back BTW you can just flash Trapkernel in the AP slot of Odin.
Click to expand...
Click to collapse
just flashed the vegito zip in twrp. would only boot back to twrp after that, so tried flashing the boot.img i had pulled from monstro rom (which im currently on). same result, so i then flashed trapkernel via ODIN, but still no boot. i haven't done any factory resets or clean installs yet cuz i'm at work. will try later tonight.
WaxysDargle said:
just flashed the vegito zip in twrp. would only boot back to twrp after that, so tried flashing the boot.img i had pulled from monstro rom (which im currently on). same result, so i then flashed trapkernel via ODIN, but still no boot. i haven't done any factory resets or clean installs yet cuz i'm at work. will try later tonight.
Click to expand...
Click to collapse
If it's automatically booting into TWRP instead of Android, then you're in a recovery loop. More info below:
As far as I know, the only way to cause a recovery loop on this device is to select "reboot to recovery"(instead of regular reboot or just powering off) from somewhere either in TWRP or Android. To fix, if just flashing Trapkernel doesn't work, then try flashing TWRP again as well. Sometimes it helps to uncheck "auto-reboot" in Odin so you can flash them both on the same go. Assuming that you didn't at any point flash anything in a slot other than the AP in Odin, it should get you booting again.
After that you can try flashing the Vegito .img file to your device. Steps for that below.
-----------------
INSTALLING VEGITO:
-----------------
1) Download the Vegito boot.img file to your device.
2) Reboot into TWRP.
3) Click on "Install".
4) Click "Install Image" button.
5) Navigate to the boot.img and select it.
6) Select "Boot" from the next page to let it know you're installing a kernel.
7) Reboot and enjoy.
If I have the time I'll do a pull request adding CPU Governors InteractiveX, Smartass, and SmartassV2 as I already have the code and files on hand after adding them to the stock kernel. Have to flash and test on my own device for bugs first.
After a user of this phone model contacted me via pm about the way root is handled and if I knew a way around it forcing root on every boot
quote on quote his words, I took a look at your git and theres only 1 commit? Like you predid everything then uploaded it and made 1 little change after..
That really makes it unable to help or fix any problems you had with other stuff added?
If anything the user would like to know why you're not using systemless root, it's far much simpler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INTRODUCTION
This is an open devDB XDA project. Feel free to fill in bugs reports, feature(s) requests and reviews.
However, the rest of the thread has the sources, feature list, download links and instructions.
Code:
Disclaimer
*
*
* Your warranty is now void.
*
* Note that "WOLFPACK" is created for Samsung Galaxy Galaxy A 2015 Series,
* obviously it will not work on any other device.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
BUGS
Click to expand...
Click to collapse
Vibration:
Kernel can't load the driver
Power-Saving:
DVFS is totally broken
SUPPORT AND REQUIREMENTS
Click to expand...
Click to collapse
Devices and ROMs:
A500H
A500FU
LineageOS
Resurrection Remix
DOWNLOADS
Click to expand...
Click to collapse
Latest builds:
RR-Builds:
*** Mod edit: link removed, thread closed, not GPLv2 compliant ***
LOS-Builds:
*** Mod edit: link removed, thread closed, not GPLv2 compliant ***
Kernel-Auditor:
Latest
XDA:DevDB Information
[KERNEL] [A5-2015] [LOS-RR] WOLFPACK, Kernel for the Samsung Galaxy A Series
Contributors
Bulgaricus
Source Code: *** Mod edit: link removed, thread closed, not GPLv2 compliant ***
Kernel Special Features:
Version Information
Status: Testing
Created 2017-07-02
Last Updated 2017-09-24
Changelog:
WolfPack-RR-2017-07-06
Solved missing sound (A5FU)
Solved battery drain issues
Solved GPU Bus Vectors
Increased CPU bark/pet time
SDCC tables support higher and better clocks (emmc)
Enabled ARCH_POWER
Updated to Linux version: 3.10.54
Various ARM patches
Various optimizations
Introduced adreno_idler
Unlocked both CPU and GPU's default speeds
Using PRIMA wlan module built with Kernel
Added Sound Control
Turned off few logs
Various fixes
Support for power aware state
Increased the CPU maximum current usage in order to make the system stable and fluid
Enabled Qualcomm's Malware Protection Sphinx component (Used by some OEM Anti-Viruses)
Removed some KNOX stuff
Using my own, complete and clean configs
Added 1080p support
there is many other changes
Click to expand...
Click to collapse
reserved
Yeah we needed a thread for this, can't wait to start testing this!
SkyWo said:
Yeah we needed a thread for this, can't wait to start testing this!
Click to expand...
Click to collapse
this time i'm alone
how about a500f man?..
leviz0689 said:
how about a500f man?..
Click to expand...
Click to collapse
you can flash the A500H one... it will boot for sure but some things might not work... like flashlight or screen rotation :highfive: You can give it a shot and report to the thread
Thanks @Bulgaricus. However, phone can no longer be detected by computer through USB. Could be because of other reasons or maybe just my phone but please check this or advise. Progress in the right direction.
Fild5x said:
Thanks @Bulgaricus. However, phone can no longer be detected by computer through USB. Could be because of other reasons or maybe just my phone but please check this or advise. Progress in the right direction.
Click to expand...
Click to collapse
Initial USB setup is set as charging you must manually set it as media storage. Oh i got it man... be sure to set ro.sys.sdcardfs=false in your build.prop, that thing will lock down your entire phone
I have tried Kernel V2 on my A500M, and everything seems to be working nice. So smooth, no issues playing online games and GPS works great. BUT I am having a problem with the sound. It's like the phone is mute but with the headphones i have normal sound. PLS HELP!
pd: I appreciate your work a lot, it's excellent
okitek1 said:
I have tried Kernel V2 on my A500M, and everything seems to be working nice. So smooth, no issues playing online games and GPS works great. BUT I am having a problem with the sound. It's like the phone is mute but with the headphones i have normal sound. PLS HELP!
pd: I appreciate your work a lot, it's excellent
Click to expand...
Click to collapse
Hey it's ROM problem. RR is for 5H and it has proper files for A5H
The sound problem in A500M was my error. Because I flash RR on STOCK 5.0.2. Now I flashed RR on 6.0.1 and everything works great except that sometimes the touch screen stop responding and you need to wait a few minutes or restart your phone.
Hey man when you build krenel for a3 los 7.1.2?
Bro when is coming a new update?
okitek1 said:
Bro when is coming a new update?
Click to expand...
Click to collapse
I will try to push a new image tomorrow. Sorry all I have exams and work
Bulgaricus said:
Initial USB setup is set as charging you must manually set it as media storage. Oh i got it man... be sure to set ro.sys.sdcardfs=false in your build.prop, that thing will lock down your entire phone
Click to expand...
Click to collapse
How could I be so stupid? I think am just too old for these things or just dull. I will soon give up. Honestly how could I forget that? I cannot understand.
I just pushed 2 new builds for RR, A5FU and A5H kernels read changelog to see what it changed
As alluded to already by others, there are issues of root and vibration that have ensued. On my phone I am now unable to root phone with super or magical once kernel (latest or earliest) is installed.
ok i installed it on my 500fu with the RR and my physical buttons don't wake up after it wakes up
hey man...you support a500f variant soon?..jusk ask and wait for final..