Flashed My wife and I's OG's with CM 10.2. She was coming from stock 4.0.1 I was coming from 4.1.2
My has no problems. Hers wouldnt connect to wifi even though it could pick up the signals.
Last night her Kernel crashed. I figured maybe I didnt fully wipe her files clean so I rebooted her into recovery and did a factory wipe,
cleaning Dalvik, etc. and reinstalled.
Still no wifi connectivity.
Is this a driver, antennae, modem issue? Please help, I've run out of ideas.
Did you flash the correct radio?
Sent from my Optimus G using Tapatalk 4
Hmmmmm
Dr0!dFreek said:
Did you flash the correct radio?
Sent from my Optimus G using Tapatalk 4
Click to expand...
Click to collapse
I just used the one that came with CM.
Do you think since she was coming from 4.01 and I from 4.1.2 that I had the correct radio already that's why I have no issues?
And she still is running the 4.01 radio which is incompatible with android 4.3 which is what CM is running?
brionbey said:
I just used the one that came with CM.
Do you think since she was coming from 4.01 and I from 4.2 that I had the correct radio already that's why I have no issues?
And she still is running the 4.01 radio which is incompatible with android 4.3 which is what CM is running?
Click to expand...
Click to collapse
Roms for the OG don't contain modems, your wife's phone would still have ICS modem. If you had the ota to 4.1 on your phone it will have jb modem.
brionbey said:
I just used the one that came with CM.
Do you think since she was coming from 4.01 and I from 4.2 that I had the correct radio already that's why I have no issues?
And she still is running the 4.01 radio which is incompatible with android 4.3 which is what CM is running?
Click to expand...
Click to collapse
Yes, given that you avoided bricking your phone not having the rpm/tz partitions from the ota update, she would also have the ics modem, which hopefully is the only thing wrong, and is an easy fix.
matter of fact I'm not aware of anyone trying the ics modem on 4.3, or using 4.3 without the updated partitions
Still, (as a purely personal preference) I would restore the backup from before you flashed her to CM 10.2, then call up AT&T and make them push the OTA update, then backup again and reflash CWM.
-edit- this is of course, if you are on AT&T
also, you can probably make a nandroid of CM 10.2, restore to stock, get the OTA, and restore CM 10.2 and you wouldn't lose anything, since it only restores kernel,system,data,cache, etc it would be unaffected by the OTA.
technically this remains true for the LGNPST/teenybin route, but i haven't used lgnpst, i prefer forcing at&t to provide the OTA update since if it bricks then, they owe you a phone
[r.]GimP said:
Yes, given that you avoided bricking your phone not having the rpm/tz partitions from the ota update, she would also have the ics modem, which hopefully is the only thing wrong, and is an easy fix.
matter of fact I'm not aware of anyone trying the ics modem on 4.3, or using 4.3 without the updated partitions
Still, (as a purely personal preference) I would restore the backup from before you flashed her to CM 10.2, then call up AT&T and make them push the OTA update, then backup again and reflash CWM.
-edit- this is of course, if you are on AT&T
also, you can probably make a nandroid of CM 10.2, restore to stock, get the OTA, and restore CM 10.2 and you wouldn't lose anything, since it only restores kernel,system,data,cache, etc it would be unaffected by the OTA.
technically this remains true for the LGNPST/teenybin route, but i haven't used lgnpst, i prefer forcing at&t to provide the OTA update since if it bricks then, they owe you a phone
Click to expand...
Click to collapse
Just like to pass on a little info I learned recently, both Shellnutt2's cm10.2 and dvhexer's "alternate" cm10.2 use an e975 kernel.and can be flashed to phones without updating partitions.
adfurgerson said:
Just like to pass on a little info I learned recently, both Shellnutt2's cm10.2 and dvhexer's "alternate" cm10.2 use an e975 kernel.and can be flashed to phones without updating partitions.
Click to expand...
Click to collapse
Yeah I considered that, still terrifying to me though, but it would explain still having the ics modem.
How does this sound?
[r.]GimP said:
Yeah I considered that, still terrifying to me though, but it would explain still having the ics modem.
Click to expand...
Click to collapse
Ok, Just got back from work.
Today, Device crashed twice. Once a kernel error, once something about watchdog.
The kernel crash occurred when using the CM 10.4 camera. The same thing happened to my wifes device.
What I'd like to do it flash the Stock Rom Back with Stock modems to both phones.
Unfortunately, my backup didnt take because of lack of space or something, so I need to find the stock 4.1.2 rom.
I need action steps if possible.
I'm assuming I need:
4.1.2 Stock Rom for my device.w/ google apps
4.0.1 Stock for my wifes's./w google apps
I'm also assuming that I'd follow the same steps:
factory reset, flash the rom + apps reboot.
I'm using TWRP
If all that goes well I'd attempt to have at&t push the update to my wife's phone ( would I need to reset her bootloader?)
Then Reflash CM 10.2 with appropriate modems, and google apps.
Please catch any errors in this logic. Also Links to stock Rom's would be appreciated.
If anyone has any suggestions to a better custom rom then CM 10.2 I'm open to suggestions. I have not found it to be as stable as I would of liked...
FYI to make things worse, now my pc won't recognize that my device is attached.... trying not to panic.
brionbey said:
Ok, Just got back from work.
Today, Device crashed twice. Once a kernel error, once something about watchdog.
The kernel crash occurred when using the CM 10.4 camera. The same thing happened to my wifes device.
What I'd like to do it flash the Stock Rom Back with Stock modems to both phones.
Unfortunately, my backup didnt take because of lack of space or something, so I need to find the stock 4.1.2 rom.
I need action steps if possible.
I'm assuming I need:
4.1.2 Stock Rom for my device.w/ google apps
4.0.1 Stock for my wifes's./w google apps
I'm also assuming that I'd follow the same steps:
factory reset, flash the rom + apps reboot.
I'm using TWRP
If all that goes well I'd attempt to have at&t push the update to my wife's phone ( would I need to reset her bootloader?)
Then Reflash CM 10.2 with appropriate modems, and google apps.
Please catch any errors in this logic. Also Links to stock Rom's would be appreciated.
If anyone has any suggestions to a better custom rom then CM 10.2 I'm open to suggestions. I have not found it to be as stable as I would of liked...
FYI to make things worse, now my pc won't recognize that my device is attached.... trying not to panic.
Click to expand...
Click to collapse
Don't panic, you can always load onto the SD card externally, with a microsd to SD adapter or through TWRP/CWM with "mount usb storage" mode. Failing both of those things I'm fairly certain one of your two phones will be enough to load the SD card for the other phone if needed.
I'm thinking everything you need is going to be the LGNPST route now anyway, and that being said you may as well just flash them both to stock 4.1.2 in that case. First things first, you definitely want to backup before anything gets out of hand, if twrp isn't getting it then pull with adb. Quick breakdown of that below.
The universal drivers straight off the LG site work just fine, but in my experience to get the adb part happy you need to click on your devices, and find your phone, whether it says LG/Nexus4/MTP, doesn't matter. Open it and click on the hardware tab, it should list 3 devices.
unknown (or adb if you're lucky)
Your phone
USB Composite Device
If the top isnt some variation with ADB in the name, double click it, then change settings, it may say drivers not loaded, so on the driver tab we're going to give it one.
Update driver, and it will ask how, the option on the bottom is "browse my comp for driver software" and after that the bottom option again is "let me pick from a list..." I think then it shows a split list, the device type should be ADB something, and if you installed the LG universal drivers then near the bottom you will have "LGE Mobile Sooner Single ADB Interface" windows will complain because it couldn't figure out that its the right driver, confirm you want to use it and it will then show "this device is working properly" go ahead and close all those windows and it will update on the first one with the three devices listed the next time you open it.
At this point you need the adb application itself, I usually just download the whole android SDK personally, but where you get it from doesn't matter. If you're booted in android, make sure adb has root access in developer settings, and debugging is enabled.
open a command promt, for the sake of easy navigate to the folder where you put adb, in windows, or in the SDK example, /android/sdk/platform-tools/ hold shift and right-click on an empty space and select "open command window here"
If android is running, type "adb root" without quotes
and adb will inform you its restarting, if in twrp you will already be root.
Type "adb devices" and as long as its not blank you should be good
again, for the sake of easy "adb backup -shared -all"
and let it do its thing, it should start creating a default file named "backup.ab" it's bound to take awhile as -shared should grab all the sd card contents just to be safe.
Disaster recovery aside, I would use a combination of Titanium backup root, and "backup your mobile" - especially add the second option in addition to titanium, thats one of the only free backup apps that can get MMS as well as SMS, and restore them.
Again, if you're having issue with the computer normally seeing the device, these are still good tools, save to external sd card, remove card and transfer manually to your computer.
ok.. now that all your stuff is *hopefully* now redundantly backed up, depending on the stock image you find, you can either push it via fastboot commands or flash with lgnpst. I know the images are in our forum, most likely in the lgnpst thread. just follow through that and read well ahead before performing each step, you'll be ok.
I believe fastboot can relock your bootloader in all off one command, i don't have the answer if its necessary or not to receive the OTA, but having skimmed the lgnpst thread in the past, I'm positive people have done the flash and then had the OTA pushed from AT&T so they could get up to 4.1.2 for the official JB and partitions. Like I said in the beginning, your call if you want to skip that and just lgnpst to 4.1.2 since you're there anyway. Also, keep an eye out for one of the recent restore to stock / RPM/TZ partition threads, I think shellnutt making a cwm/twrp flashable zip to do the same thing lgnpst teeny bin would without even needing lgnpst.
So, barring a complete hardware failure, dont be scared. Get your data for now, then on to the next step.
Best xda technical support post I have seen in a long time. Thanks, gimp.
Sent from my Optimus G using XDA Premium 4 mobile app
DeathmonkeyGTX said:
Best xda technical support post I have seen in a long time. Thanks, gimp.
Sent from my Optimus G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Agreed.
Sent from my Optimus G using Tapatalk 4
I agree also! feels great to have some help with this. attempting fixes I'll report back.
Sent from my LG-E970 using XDA Premium 4 mobile app
I got stuck on the adb driver part. Through searching I found the backup I made for her. Can I restore her backup. Flash the jellybean rom to it, creating the neccessary. Partitions in the process, along with the correct radio, and then reflash Cm? My main concern is getting her wifi up. She's racked up 6gigs in 2 days herself! Were on the 4.gig shared plan. Or possibly just flash the radio...
Sent from my LG-E970 using XDA Premium 4 mobile app
brionbey said:
I got stuck on the adb driver part. Through searching I found the backup I made for her. Can I restore her backup. Flash the jellybean rom to it, creating the neccessary. Partitions in the process, along with the correct radio, and then reflash Cm? My main concern is getting her wifi up. She's racked up 6gigs in 2 days herself! Were on the 4.gig shared plan. Or possibly just flash the radio...
Sent from my LG-E970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yes that sounds fine, in that case I would just make the apps and messages backups with titanium/backup your mobile
I'm not 100% if the lgnpst flash to JB wipes user data or not, but after that you can flash pretty much ANY rom for our device, then just download titanium/backup your mobile from the app store and point it to the directories on the sd card, and restore selectively.
For the most part you can move everything from /sdcard to /external_sd and move it back over when you're done, I think the JB radio (or modem, both terms apply) works very well for everything I've used (and yes they play a significant part in wifi and gps also), and I was a pretty hardcore flash-a-holic for a really good while, still haven't tried the hybrid modems and people rave about how well they work. Sounds like a good plan you got going, once you're up with the partitions and the JB modem from 4.1.2 you really should have no issues, and once you have that freedom, and she will as well to try out all manner of ROM's, you'll find you get really good at backup/restore out of necessity. Happy flashing.
If you need any specifics, aside from the step by steps of the other threads I'm glad to lend advice, just let me know
-edit- you can make multiple backups with each program by the way, titanium and backup your mobile.
Titanium free says only one backup per app, but in reality just hit the batch button on the top right, looks like a check mark, have it get all apps and system settings, then just move the whole folder you set for titanium off of the device for safe keeping. This way you can backup everything running right now, then if you want to restore the other one, you could even do it again, if you just wanted to cherry pick some stuff, then flash, etc. Titanium free wont let you make multiple copies of the same app, but it also WONT delete extras if you already have them, so if you dump a few titanium folders into eachother and merge them, you can then choose any of the backup files or data or both from each date.
The reason I use both programs is as I said earlier, backup your mobile handles SMS/MMS very efficiently, and occasionally I'll let it grab a few user apps, and system apps, because when it restores them, it restores for example, flash player from LG stock rom, as a user app, and it continues to work flawlessly. Titanium can't get over it being a system app, and sucks at restoring flash.
However, titanium is GREAT for also saving user data, not just the program itself. ie.. savegame states for any app you have that doesnt explicitly sync online, or the login data for facebook, or adfree with the most current hosts so you dont have to redownload or even type your logins, very convenient.
My personal order of operations before I flash a new rom, or even upgrade to a new version with a clean flash instead of a "dirty" is to fully backup all apps/system data with titanium, then hit ByM for contacts/sms/mms/bookmarks/user dictionary/apps
then a nandroid backup, since it is basically a perfect snapshot itself, just like turning the phone off, and back on.
after rom flash / gapps, I boot, setup google real quick, goto app store and cancel the 5 million downloads, except for titanium/ByM
after those download I roll my messages/user dictionary/contacts/ selective apps I know i'll use, and the same with a few from titanium.
This way I'm less bloated with crap I probably don't use everyday, and if i need it, its a few taps away. It's a very painless process and a lot of peace of mind having everything safe, and allows you to try alot of unstable crap knowing how easy you can always roll your CWM/TWRP backup over to the device like you never left.
Sorry, I'm a fan of ranting. Pics for adb driver steps explained in previous post, and the backup part, for reference if you ever need them.
View attachment 2263477
View attachment 2263478
Ok, I'm keepin cool but it seems to be one thing after another
I made the backup before the original flash.
I see it in the folder. When I restored it, it is the same rom that I'm on CM 10.2
I'm not sure how that happened.
Thanks for the images, that really helped unstuck me.
Question: I've checked the threads looking for the stock [ROM] 4.1.2 and Gapps for E970 and can't find them anywhere.
At this point I just need a doOver. I have to get my wife her phone back, ASAP and if I brick by some chance, I'll never hear the end of it.
EVER.
Or how about just flashing the radio? Can I do that to at least get her Wifi?
Here is the flashable jellybean radio by g33k3r.
http://forum.xda-developers.com/showthread.php?t=2220048
I recommend still updating her to the jellybean partition layout when you get a chance, but this should get you working WiFi at the very least.
Sent from my LG-E970 using xda app-developers app
Flash the Radio
Thanks SnowLeopard.
So all I need to do is just boot into recovery using TWRP and Install the radio, or should I factor reset and install the radio at the same time as the rom?
Thanks Again Guys. (or gals)
Lgnpst doesn't touch the /data partition.
Sent from my Optimus G using XDA Premium 4 mobile app
the modem work great.
Sent from my LG-E970 using XDA Premium 4 mobile app
At gimp, followed instructions exactly, computer recognize device, only thing left to do is run teeny bit, but getting error path not found
Sent from my LG-E970 using XDA Premium 4 mobile app
Related
My Thunderbolt received an OTA update last week and keeps rebooting. I have ClockworkMod Recovery so the Install fails. I cleared the Cache with CWM and restarted the phone like it suggests in other posts elsewhere. I get a failed update message, I cancel out of it and reboot the phone. I also used Titanium Backup to Freeze "Update" and "Updater", but the phone keeps self booting into the OTA update every day . I searched for an update.zip and cannot find one on the SD card.
Can anyone suggest how to stop the phone from updating/rebooting everyday? I cannot seems to find the answer anywhere.
Thanks and I wish everyone a safe holiday!
DD
Just to confirm, are you rooted but on the stock rom? If so, you should be able to find some threads to go on from searching, but here are a couple where people got the update install while rooted:
http://forum.xda-developers.com/showthread.php?t=1330325
http://forum.xda-developers.com/showthread.php?t=1324682
Sorry I forgot to mention it
Yes, I'm rooted, I'll check out the links.
more than likely you wont have an update.zip but rather an RUU. Remove the RUU from the SD card and see how that works. If I was having this problem I would do a full wipe on the phone backup my full SD card contents and format the SD card and flash a custom rom with CWM. I never understand what the point of rooting is if you are not going to flash a custom rom. Are you afraid? Worried about bricking? I just don't get it. Put the new MIUI on it. You will be pleased.
I installed Liquid ROM 3.1 and it's working like a charm. I was concerned about the 3G/4G compatability problems that most custom ROMS seem to have.
Using Titanium Backup Pro I backed up all my apps then restored them after installing Liquid ROM and re-setup the desktop and all is well.
bigd5783 said:
I never understand what the point of rooting is if you are not going to flash a custom rom.
Click to expand...
Click to collapse
Really? The ability to fix things like security holes, use ad filters, make complete, easily restorable backups, install a certificate for a private CA, or just have fairly complete control over hardware you've purchased isn't enough?
mike.s said:
Really? The ability to fix things like security holes, use ad filters, make complete, easily restorable backups, install a certificate for a private CA, or just have fairly complete control over hardware you've purchased isn't enough?
Click to expand...
Click to collapse
I was actually broken hearted that I was compelled in install a custom rom to avoid the problems the op has described. Everything "works" in standard rom. When you go custom you get lots of fun new features but you always lose something..... Could be vzw vvm or nfl live or fast gps lock or photo effects in gallery but it seems there is always someting you lose.
recDNA said:
I was actually broken hearted that I was compelled in install a custom rom to avoid the problems the op has described. Everything "works" in standard rom. When you go custom you get lots of fun new features but you always lose something..... Could be vzw vvm or nfl live or fast gps lock or photo effects in gallery but it seems there is always someting you lose.
Click to expand...
Click to collapse
really,cause everything you mentioned has work on soab from the get go.
Sent from my ADR6400L using xda premium
Is there anyone out there who is willing to point me in the right direction for re purposing my retired Eris (RIP 02-12-13)? Hoping it can be a tool for learning (still in A- shape), instead of a paperweight! I have been doing some reading, but downloading is another story, mostly 404s out there now.
P.S. First post in any forum ever, just a humble android noob searching for knowledge and stable Roms from those who offer, sorry if I have posted this in the wrong place, obviously I have posted at the wrong time! A million thanks in advance to anyone with good news or advice!
DB73 said:
Is there anyone out there who is willing to point me in the right direction for re purposing my retired Eris (RIP 02-12-13)? Hoping it can be a tool for learning (still in A- shape), instead of a paperweight! I have been doing some reading, but downloading is another story, mostly 404s out there now.
Click to expand...
Click to collapse
What is it you are looking for? I have copies of a lot of ROMs.
doogald said:
What is it you are looking for? I have copies of a lot of ROMs.
Click to expand...
Click to collapse
Hello, and thank you, I am happy to here some good news. I am obviously new to this, but I love to try out different OSs and remaster them the way I see fit. I have just not taken the plunge with android. Since I have never installed any, it's hard to say witch ones I would like best. I would take any ROMs I could get. I figure I can experiment and learn with my Eris, then re purpose it for my son to play games, take pictures etc.
P.S. I downloaded the Jcase / Eclipse3 one click root. Is this the method you would recommend for getting su privileges? I would love to hear your preference on an easy and up to date rooting method. My Eris is currently bone stock with official 2.1, and up to date according to it.
DB73 said:
Hello, and thank you, I am happy to here some good news. I am obviously new to this, but I love to try out different OSs and remaster them the way I see fit. I have just not taken the plunge with android. Since I have never installed any, it's hard to say witch ones I would like best. I would take any ROMs I could get. I figure I can experiment and learn with my Eris, then re purpose it for my son to play games, take pictures etc.
P.S. I downloaded the Jcase / Eclipse3 one click root. Is this the method you would recommend for getting su privileges? I would love to hear your preference on an easy and up to date rooting method. My Eris is currently bone stock with official 2.1, and up to date according to it.
Click to expand...
Click to collapse
Yes, if you can find the JCase 1-click root, that will root the phone just fine.
There is another method very well documented here: http://androidforums.com/eris-all-things-root/127861-universal-eris-root-dummies.html (which also walks you through installing for your first custom ROM.)
I have some ROMs in my Dropbox if you can't find links.
xtrSENSE (stock 2.1 Eris ROM, rooted): https://dl.dropbox.com/u/220420/Eris/xtrSENSE/xtrSENSE5.0.1.zip
Workshed's GSB: https://www.dropbox.com/s/dvpuv4sbwmun43f/GSB.v4.5-final_ODEXED_CM7.2-Eris.zip
CondemnedSoul's CM7.2: https://www.dropbox.com/s/g1irvshpg7u7trr/CCM7_Eris_V24_RIP.zip
The last two are CyanogenMod Gingerbread ROMs. I think that GSB requires that you also flash Google apps in order to get the market. If so, you can get it from CyanogenMod here: http://cmw.22aaf3.com/gapps/gapps-gb-20110828-signed.zip
(So, if you need to flash gapps, you go into Recovery. Wipe data/factory reset. Flash the ROM. Flash google apps. THEN restart the phone.)
doogald said:
Yes, if you can find the JCase 1-click root, that will root the phone just fine.
Just realized why it wouldn't let me post, because of the links in my reply, :silly:
Thank You, I downloaded the ROMs. The link for gapps is dead though. Was that just needed for Workshed's GSB or also for CM7.2?
I have a few questions to throw out there:
1. I was thinking about doing another factory reset, my attempt to have a clean recovery. What will non-activation after boot with no service do?
2. Does vanilla = fast, lightweight, performance, more partition space for user? If so, do you have any recommendation / or a link?
3. Rumored Jellybean for the Eris, love to find the latest build, is it still available? Links point here (XDA) but no download.
4. Is there any way to get google play instead of market working on the Eris?
(((Thanks again for everything)))
XML Parsing Error: unexpected parser state
Location: jar:file:///C:/Program%20Files/Mozilla%20Firefox/omni.ja!/chrome/toolkit/content/global/netError.xhtml
Line Number 308, Column 50:
Click to expand...
Click to collapse
DB73 said:
Thank You, I downloaded the ROMs. The link for gapps is dead though. Was that just needed for Workshed's GSB or also for CM7.2?
Click to expand...
Click to collapse
Try this one: http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip
CondemnedSoul's includes the Google apps already and does not require a separate flash of the gapps zip file.
Ok, I just checked: GSB does NOT require google apps, either; they are already included. You can ignore that step.
I have a few questions to throw out there:
1. I was thinking about doing another factory reset, my attempt to have a clean recovery. What will non-activation after boot with no service do?
Click to expand...
Click to collapse
Oh, good question. I would avoid it if you can. The Eris will insist that you activate. However, if you follow the prompt to activate and then press the disconnect button as soon as you hear it ring, it will try activation again two more times. If you disconnect after hearing the ring those two times as well, the phone will give up on activation and allow to continue with setup.
2. Does vanilla = fast, lightweight, performance, more partition space for user? If so, do you have any recommendation / or a link?
Click to expand...
Click to collapse
Not necessarily. In my experience, xtrSENSE is fastest, but the GB ROMs are just fine. You may not notice the difference. However, xtrSENSE has a method called cache2cache that frees up more storage space or user applications and data. If you install a lot of apps, xtrSENSE may give you more space.
That said, there are disadvantages, including missing out on apps that do not run on android 2.1.
There is something called xtrcache2cache that you can flash on the GB ROMs to give you the same sort of space. I'll try to find a link.w
3. Rumored Jellybean for the Eris, love to find the latest build, is it still available? Links point here (XDA) but no download.
Click to expand...
Click to collapse
I've never tried it, and I can't believe it runs with any sort of decent performance anyway.
4. Is there any way to get google play instead of market working on the Eris?
Click to expand...
Click to collapse
Not on android 2.1, but the two gingerbread ROMs will update the market to the play store.
xtrcache2cache is here: http://forum.xda-developers.com/showthread.php?t=924562
The download link there seems to work.
Copy that file (xtrCMCache2cache.zip) to your SD card. This is only for the Gingerbread ROMs - it's not necessary for xtrSENSE.
Restart the phone to recovery. If you have already flashed one of those ROMs, simply flash that xtrCMCache2cache.zip file - do not wipe data or Dalvik cache first. Restart the phone, and you'll have probably about 20-30 MB more free storage space for apps and data.
If you have not already flashed GSB or CondemnedSoul's, do this:
- restart in Recovery
- wipe menu
- wipe data/factory reset
- main menu
- flash a zip file, and choose GSB or Condemned
- flash a zip file, and choose xtrCMCache2cache.zip
- restart the phone
doogald said:
xtrcache2cache is here: http://forum.xda-developers.com/showthread.php?t=924562
OK, I will read what I have gathered one or two more times before taking the plunge. I am thinking of using the Jcase method, it seems pretty much idiot proof. I have the file and ROMs stored on my PC, and now on a CD as well, just so I don't loose them. If I have this right, I will:
Pre-Steps:
Copy the Jcase one click root file to an empty SD card, install a file explorer app capable of launching it, take a deep breath, here we go Or maybe I have to copy to android filesystem first?
1. Execute Jcase's one click, and after reboot, I should have the Amon Ra recovery. This is simple, but also the most dangerous part? If this were to fail, it would be similar to a bad BIOS flash. This would brick the phone, if I am understanding this correctly.
2. Then Use the recovery to flash rootme.zip now located on SDCard. Going to use a 2 Gb card from my old LG 8350 (phone before Eris).
3. Do Nand backup of semi clean stock OS. By doing so I will loose the stock recovery for good, meaning no more resets to OG clean?
3.5? On second thought, doing one last reset first would remove all user data with my name and credentials. It may be wise to do this, as it will eventually be in the hands of a 5 year old. This would prevent accidental purchases, I think! On the other hand, if I ever break or loose my new phone and need a temp phone, I could keep this image (as is) to use temporarily with Verison until I get a replacement! I can only choose one of these options. I guess the latter is best, and use only a custom ROM for my son to play with. Hopefully I can temporarily disable or somehow limit su before giving it too him.
4. Do Nand backup of original official image, and put somewhere safe, like 2 places + on CD then remove from SD for more available space.
5. Flash one of the 3 downloaded ROMs and also xtrCMCache2cache if desired to desire-c
6. I assume that appstoSD is something I would need to download now, then add after previous steps, if I feel the need!
7. Then its off to test land! I hope I understand this correctly. The one step I have missed is definitely very important. I did not verify the MD5 on Jcase's one click. In fact I don't even remember where I downloaded it from. Truth being told, I have never manually done a MD5 verification! I guess I have one more step that I absolutely need to learn as it is much more important in Android, especially for recovery!
Edit: I have re downloaded the file from here (XDA), did not see a sum to compare it to? I hope the file still is OK!
Edit # 2 I downloaded a MD5 calculator and this is the output (F34FECFFB985553B68D66F6AC1EF27D3) for the erisone010.apk file
Another big thank you Doogald, If I have something wrong here, please, feel free to beat it into me now, before I do something stupid!
Click to expand...
Click to collapse
DB73 said:
Pre-Steps:
Copy the Jcase one click root file to an empty SD card, install a file explorer app capable of launching it, take a deep breath, here we go Or maybe I have to copy to android filesystem first?
Click to expand...
Click to collapse
No, Your regular SD card is fine. You do need to enable third-party app installs; you'll find that setting in settings->applications.
1. Execute Jcase's one click, and after reboot, I should have the Amon Ra recovery. This is simple, but also the most dangerous part? If this were to fail, it would be similar to a bad BIOS flash. This would brick the phone, if I am understanding this correctly.
Click to expand...
Click to collapse
Yes. You must restart the phone as if you wanted to make a phone call. Many people get too eager and try to get into Recovery before full restarting.
I can't believe that flashing Amon_RA is all terribly dangerous. There are ways to recover. In fact, I have not seen anybody report a brick after running the JCase 1-click. I'm sure that it will be fine.
2. Then Use the recovery to flash rootme.zip now located on SDCard. Going to use a 2 Gb card from my old LG 8350 (phone before Eris).
3. Do Nand backup of semi clean stock OS. By doing so I will loose the stock recovery for good, meaning no more resets to OG clean?
Click to expand...
Click to collapse
You *could* do the Nand Backup before running rootme.zip. Actually, you only really need to run rootme.zip if you want to do something with root with the stock Android you have now. Some people may, for example, install the application Titanium Backup Pro (which requires root) and batch backup all user apps (menu->batch and choose to run that option from the list) and then, after installing a new custom ROM, reinstall Titanium from the market/play store and then batch restore all missing apps and data. It's a very powerful way to get the phone running all of your apps and data without reinstalling from scratch.
That brings up one more thing: if you decide to install xtrSENSE, you do not need to do a factory reset if you want to keep all of your apps and data. Of course, if you want a fresh start you may, but xtrSENSE will keep all of your apps and data and give you a faster Eris with more room for apps and data.
Also, it *is* possible to get stock recovery back, though not without losing all of you data. There is a ROM called Flashback_21v2 that will bring back stock recovery and an unrooted Eris if you wish. The phone will act as if it was never rooted. You can find it here: http://forum.xda-developers.com/showthread.php?t=792026
That would be a good thing to keep on your phone, just in case. (Though I have to say that I am hosting the location of those files on my website and I have no plans to stop doing so, so they should be around for a while...) You'll probably be fine with the "no radio" version, but if you can spare the space on your computer, (that's a bit of a joke; the files are small), I'd download both.
3.5? On second thought, doing one last reset first would remove all user data with my name and credentials. It may be wise to do this, as it will eventually be in the hands of a 5 year old. This would prevent accidental purchases, I think!
Click to expand...
Click to collapse
In that case, you DEFINITELY want to wipe data, even with xtrSENSE!
On the other hand, if I ever break or loose my new phone and need a temp phone, I could keep this image (as is) to use temporarily with Verison until I get a replacement! I can only choose one of these options.
Click to expand...
Click to collapse
No, you can do both. Do a Nand Backup of the phone after you root it, which will be stored on the SD card. Wipe data/factory reset and you can installa ROM and then always go back into recover and Nand restore what you backed up originally to get your phone back as it was when you ran the backup. Familiar with Norton Ghost for Windows PCs? That's what Nand backup and restore does - it takes a full snapshot of your phone as it is, and when you restore, it's as if you had just turned off your phone for a long time - it's back to the way it was at the time you made the backup. You can have multiple backups stored - as many as will fit on the SD card.
6. I assume that appstoSD is something I would need to download now, then add after previous steps, if I feel the need!
Click to expand...
Click to collapse
Well... xtrSENSE support apps2sd as it is, and there are scripts to turn that functionality on. The GB ROMs support using the Android-native moving of apps to sd, so I would avoid apps2sd for them.
7. Then its off to test land! I hope I understand this correctly. The one step I have missed is definitely very important. I did not verify the MD5 on Jcase's one click. In fact I don't even remember where I downloaded it from. Truth being told, I have never manually done a MD5 verification! I guess I have one more step that I absolutely need to learn as it is much more important in Android, especially for recovery!
Edit: I have re downloaded the file from here (XDA), did not see a sum to compare it to? I hope the file still is OK!
Click to expand...
Click to collapse
The MD5 I have for 1click is f34fecffb985553b68d66f6ac1ef27d3
HOWEVER, can I suggest instead that you use the 1-click root here, prepared by Scary Alien: http://androidforums.com/eris-all-t...2-custom-recovery-trackball-not-required.html
If you look at the bottom of the first post, "Scenario 5", there is another version of 1click with a better version of Amon_RA (that allows you to use the hardware keys to navigate recovery, rather than just the trackball; sometimes the trackball doesn't work in the original Amon_RA). That version I guarantee is safe, and Scary Alien has the MD5 right there.
I am guessing multi-quote is what I should have tried on this instead of deleting?
OK, running 1 click directly from from SD card. Third-party apps ticked on before hand, check.
After running 1 click, do normal restart, then shutdown, then go into recovery via vol / end start up.
No bricks reported, that is very good news. Also good to hear that there may be a procedure for un-bricking in the unlikely event!
My Eris already has already has all apps removed, I tried to make it as clean and small as possible. Just looked at the xtrSENSE page and copied some tips, sounds nice and fast, liking that!
Awesome, I downloaded all 3 including Cupcake, in case I want to remember what that was like.
I did exactly that, downloaded both.
I will give this some extra thought before giving it to my son.
I have never used Norton Ghost, but I have used Macrium Reflect, Seagate Disk Wizard, Acronis etc. I get the image/snapshot thing. I plan to store backups in other locations, then copy back to SD if and when needed.
Just did some reading on the xtrSENSE page about aps2sd, guess I will do some more reading about native moving of apps to sd soon.
The MD5 I have matches yours. I downloaded MD5 Calculator and I guess it works.
After reading the page including "Scenario 5" I absolutely agree. I downloaded it, and will use the "scary alien" modded version with the added functionality. Thank you very much for pointing this out. Looks like no change in the simple execution besides the app/file to run, very nice!
Doogald, I can clearly see that you go out of your way to help others to say the least, I am sure its appreciated by more than just me, Thanks!
DB73 said:
I will give this some extra thought before giving it to my son.
Click to expand...
Click to collapse
Hey, one other thing: CondemnedSoul posted a script that you can run that disables the mobile radio, so you can make the device WiFi only. It's here: http://forum.xda-developers.com/showthread.php?t=1216571
I have to say that I have never tried it, but it seems from the replies in that thread that many have, successfully.
Jelly Bean build anyone?
This may be redundant, but does anyone have a copy of the eris jelly bean rom laying around? Just found my old rooted eris with cyanogenmod and I would like to try jelly bean or ICS.
foodude1 said:
This may be redundant, but does anyone have a copy of the eris jelly bean rom laying around? Just found my old rooted eris with cyanogenmod and I would like to try jelly bean or ICS.
Click to expand...
Click to collapse
Of course it isn't redundant, in fact this maintains the forum active, well a bit.
Here is the Jellybean Rom you requested, it is from MongooseHelix's build. It has a different Gapps package from what MongooseHelix actually established but I assume no issues may occur. :highfive:
https://copy.com/TgfFHxTqOHPJ
So, I've had quite a long night trying to accomplish what seems to be such an easy task for every one else. My main goal for tonight was to root my HTC One and install a custom ROM, preferably ARHD 4.3. This was unfortunately not the case. This is my first time handling anything along the lines of rooting a phone or doing anything like that.
I started off by unlocking the bootloader and then moving on to install TRWP as my custom recovery image. Once I rooted my device after that, I started looking up custom ROM's only to find out that I would need to install firmwares before I installed the ROM's, which required me to pretty much re-do every thing above.
Here's where the problems began to happen. I had to try and get my S-On to go to S-Off and I got errors everywhere. Either I got an error trying to do one guide via terminal command inside of an app on the device, or my model number didn't show up on available methods. I don't even know, all I know is I never got to actually succeed with getting my thing to S-Off, therefore I never could do any firmware installs.
I then read that the Google Edition 4.3 only needed the radio to be installed via firmware so I thought hey, I bet this ROM is perfect for me. But, then I read that you still need the firmware upgrade to be stable.
My actual question because I'm just overall sick of this and it's beginning to scare me that I've ruined my phone and I'll never get it to how it used to be;
I just want to go back to how my phone was. Factory settings across the board. However, I have no idea how to do this and the 2 backups I had in TRWP aren't showing in the recovery, however they are showing in the ES file manager within the Google Edition 4.3 ROM.
Please help, this is starting to freak me out. I had to pay $600 for this phone off contract and I made a dumb ass decision tonight.:crying:
You don't have to install firmware for any custom rom and you may never have to.
Sent from my HTC One using Tapatalk 4
Nick281051 said:
You don't have to install firmware for any custom rom and you may never have to.
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Really? What exactly is firmware and why is it not needed? On the ARHD custom ROM threads, it says at the bottom that it is not needed, but recommended. I also read people's comments saying if the firmwares aren't installed, then you lose stability for your custom ROM's. Is that true and if so how?
I currently have the Google Edition 4.3 ROM and it seems to be workng fine without the Radio firmware. I just don't know what is needed and what isn't. But, my device has the bootloader unlocked, TRWP installed, fully rooted and Google Edition ROM 4.3 installed.
Am I okay?
Leather Sock said:
Really? What exactly is firmware and why is it not needed? On the ARHD custom ROM threads, it says at the bottom that it is not needed, but recommended. I also read people's comments saying if the firmwares aren't installed, then you lose stability for your custom ROM's. Is that true and if so how?
I currently have the Google Edition 4.3 ROM and it seems to be workng fine without the Radio firmware. I just don't know what is needed and what isn't. But, my device has the bootloader unlocked, TRWP installed, fully rooted and Google Edition ROM 4.3 installed.
Am I okay?
Click to expand...
Click to collapse
You are FINE, that's the same set up I have basically. Unlocked BL, Root, TWRP and sinless GE rom from the International forums. I have never touched s-off or any firmwares/radios.
I've run nearly every sense and GE rom in the One forum and never had an issue.
In theory I suppose the upgraded firmware could be better but I haven't heard of any real benefits of doing it. And have had no issues without it so it seems kinda pointless.
Sent from my HTC One using xda app-developers app
FanDroid09 said:
You are FINE, that's the same set up I have basically. Unlocked BL, Root, TWRP and sinless GE rom from the International forums. I have never touched s-off or any firmwares/radios.
I've run nearly every sense and GE rom in the One forum and never had an issue.
In theory I suppose the upgraded firmware could be better but I haven't heard of any real benefits of doing it. And have had no issues without it so it seems kinda pointless.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Oh wow, thanks a ton for the reply. That made me feel a ton better. I've been panicking about this.
Leather Sock said:
Oh wow, thanks a ton for the reply. That made me feel a ton better. I've been panicking about this.
Click to expand...
Click to collapse
No problem... I was worried to when the firmware update came out and devs started putting little disclaimers in their posts about recommending it. I'd be willing to bet that there are more people in these forums with s-on and stock firmware flashing away without issues.
Sent from my HTC One using xda app-developers app
FanDroid09 said:
No problem... I was worried to when the firmware update came out and devs started putting little disclaimers in their posts about recommending it. I'd be willing to bet that there are more people in these forums with s-on and stock firmware flashing away without issues.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
My only concern right now is that I have a tad bit lower free space now that I've made backups and flashed my ROM and such. The stock HTC One comes with 32GB but you get about 27GB~ to use. Before I did anything I'm fairly certain I had roughly 25-26GB of free space. Now I have 20GB. Could this be from the backups taking up a lot of space? I have 3.
Leather Sock said:
My only concern right now is that I have a tad bit lower free space now that I've made backups and flashed my ROM and such. The stock HTC One comes with 32GB but you get about 27GB~ to use. Before I did anything I'm fairly certain I had roughly 25-26GB of free space. Now I have 20GB. Could this be from the backups taking up a lot of space? I have 3.
Click to expand...
Click to collapse
ummmm... yes if the backups are stored on phone
backups backup everything on the phone... so you saved 5gb in copies 3 times...you're lucky they are compressed
You should really have just one copy saved on a safe pc or flash drive
ghostlogic said:
ummmm... yes if the backups are stored on phone
backups backup everything on the phone... so you saved 5gb in copies 3 times...you're lucky they are compressed
You should really have just one copy saved on a safe pc or flash drive
Click to expand...
Click to collapse
Well, when I tried to put the backups on my phone by copying and pasting them, it only pasted some of the stuff inside of it and not all of it. It was weird but it didn't let me paste all of the inside contents onto my computer.
Leather Sock said:
Well, when I tried to put the backups on my phone by copying and pasting them, it only pasted some of the stuff inside of it and not all of it. It was weird but it didn't let me paste all of the inside contents onto my computer.
Click to expand...
Click to collapse
That's strange I've transfered backups before without issue. I would try again, it may have just been an anomaly.
I would recommend keeping at least a stock as possible backup on your phone to be safe.
Personally I keep 3 backups: a stock AT&T one, an InsertCoin Sense edition, and a SinlessROM Google edition.
The resulting space is enough for me, if your worried about space your only option is to keep the other two on your PC, not really a way around it.
Sent from my HTC One using xda app-developers app
FanDroid09 said:
That's strange I've transfered backups before without issue. I would try again, it may have just been an anomaly.
I would recommend keeping at least a stock as possible backup on your phone to be safe.
Personally I keep 3 backups: a stock AT&T one, an InsertCoin Sense edition, and a SinlessROM Google edition.
The resulting space is enough for me, if your worried about space your only option is to keep the other two on your PC, not really a way around it.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Well, I have a backup that is only an unlocked bootloader + root with the stock AT&T ROM, however I don't see any possible way of putting it onto my computer since I can't access the file from my computer. Originally the backups were in the TRWM folder in the internal storage on my computer, but then they stopped showing up in the backups through TRWP so I had to move them to /data/media/TRWP instead of 0/data/media/TRWP or whatever.
I'm not sure if that makes sense because it barely does to me either.
Leather Sock said:
Well, I have a backup that is only an unlocked bootloader + root with the stock AT&T ROM, however I don't see any possible way of putting it onto my computer since I can't access the file from my computer. Originally the backups were in the TRWM folder in the internal storage on my computer, but then they stopped showing up in the backups through TRWP so I had to move them to /data/media/TRWP instead of 0/data/media/TRWP or whatever.
I'm not sure if that makes sense because it barely does to me either.
Click to expand...
Click to collapse
Ya I know there are issues with storage going from 4.1 to 4.2. I'd recommend getting a good file explorer from the play store (I recommend es file explorer) use that to find your backups... Just search "backup" using the search function if you need to. Then copy the backups somewhere you can see them with your computer like to the root of your storage. From there copy to your computer.
Sent from my HTC One using xda app-developers app
Just like fandroid I have a copy of a Stock GPe 4.3 and an Stock AT&T version backup on a usb drive that i keep safe and as for the firmware and s-off/s-on at first i had a little trouble with getting s-off but i tried it 3 or so more times then on the the 2nd or 3rd time (I can't remember) it worked and i got the new firmware and it has been all good for me.
Alright, I hope I have this in the right place. I just recently flashed the TerraSilent Kernel for the Galaxy Player 4.0 US version. The Flash went fine, but my device was running extremely slowly. A re-flash didn't solve it either. I figured that wiping the cache partition might solve the problem - I decided to do this before running a backup, since no important data is stored in the cache (...right?), and since I was worried that backing up while I had this problem could make things worse - so I went ahead into CWM and did just that. Then, it reboots, and I nearly get a heart attack. The stock wallpaper is back, it's using the default launcher again (I had LauncherPro installed), and pretty much only system apps work, all the others have an icon with an SD card on it, and when clicked on, it says something like "application not installed". I did some searching, and it seemed like a reboot might help (although I didn't find anyone with a problem like mine anywhere). The reboot didn't do anything, so now I have it shut down, so that nothing can happen. The odd thing is, it doesn't seem to me like the system messed up and did a full wipe instead, either, because a couple of things I have are still there - for example, some of my bookmarks I made on the homescreen while still using the default launcher are still there. I'm really confused because I have wiped the cache partition before, when I was still on an unmodified stock kernel, and everything stayed the same, the way I thought it was supposed to. And now this happens. What do I do now? I exported my absolute most important data (Astrid Tasks and Calendar) before I installed TerraSilent (but I obviously wasn't able to do a full backup because I wasn't rooted, I figured installing TerraSilent would root it), so my absolute most important data is on my computer. I also did a simple file backup of the internal USB storage and external SD card to another computer before flashing TerraSilent. However, there is still a good deal of data still need, and a lot of data that would just be a pain in the rear to recreate, not to mention my (valuable to me) game data. What did I do wrong - or did something in the system mess up? And - what do I do to get back to where I was before?
It happened to me when I was on gingerbread with terrasilent. It's a known issue with this kernel. In fact, you didn't wipe the data, but the recovery contain a bug wich format the data as soon as you do an operation wich mount the data partition(I think it's this but I can't remind) but it doesn't wipe the system or anythin else, so the icon, setting and everything else stay there but without anything attach to them. I don't remind what was causing it, I only stopped using cwm with this kernel unless I wanted to flash something or to wipe everything. Sorry but I can't help you more as I don't remind everything, it's been a while since I've been on gingerbread.
ti-pich said:
It happened to me when I was on gingerbread with terrasilent. It's a known issue with this kernel. In fact, you didn't wipe the data, but the recovery contain a bug wich format the data as soon as you do an operation wich mount the data partition(I think it's this but I can't remind) but it doesn't wipe the system or anythin else, so the icon, setting and everything else stay there but without anything attach to them. I don't remind what was causing it, I only stopped using cwm with this kernel unless I wanted to flash something or to wipe everything. Sorry but I can't help you more as I don't remind everything, it's been a while since I've been on gingerbread.
Click to expand...
Click to collapse
Wasn't that problem solved with a later version of the kernel though?
And, assuming that's what happened (what you describe sounds pretty much like what happened to me), would that mean that the only way to try and get it back would be by trying to recover the formatted data?
trainman261 said:
Wasn't that problem solved with a later version of the kernel though?
And, assuming that's what happened (what you describe sounds pretty much like what happened to me), would that mean that the only way to try and get it back would be by trying to recover the formatted data?
Click to expand...
Click to collapse
It was said to be resolved, but it happened to some peoples even thought. Maybe you can recover some of your data with your computer and some tools that let you get the erased data, but I can't guarantee the integrity of your data and you would need to replace every bit of data that was there before to get it running nicely. The easiest way would be to try to recover some of your important data, put it on your computer then wipe your player and start from scratch (wipe data/factory reset) and reinstall your apps. Then put back the save, or setting or files that you got back in your apps. Hope this help, I'm not a proffessional with data recovering or where to put it back after you got it, maybe someone else could further help you with this.
And the conclusion...
ti-pich said:
It was said to be resolved, but it happened to some peoples even thought. Maybe you can recover some of your data with your computer and some tools that let you get the erased data, but I can't guarantee the integrity of your data and you would need to replace every bit of data that was there before to get it running nicely. The easiest way would be to try to recover some of your important data, put it on your computer then wipe your player and start from scratch (wipe data/factory reset) and reinstall your apps. Then put back the save, or setting or files that you got back in your apps. Hope this help, I'm not a proffessional with data recovering or where to put it back after you got it, maybe someone else could further help you with this.
Click to expand...
Click to collapse
OK, my reply is late, but thanks for your help. I managed to copy the partition with all the deleted contents over to the computer, and I'll have to study the contents some other time, because I've spent about 24+ hours on this problem in total, and need my device for more important purposes - those for which the data I managed to copy before the custom kernel and everything else. For those of you who have a similar issue, this is how I managed to save (or that is I am 95% sure this will have saved at least some, as I said I haven't studied it yet) what I hope is a good chunk of my data.
Have you tried flashing a different kernel? Terrasilent also gave me some weird in that after a few days my device would boot into recovery by itself then wipe all my data in that only my system apps would remain. So it's a little different than what's happened to you. I ended up using klin's R3 kernel or Steven's kernel that fixed the issue.
Sent from my YP-G1 using xda app-developers app
obscuresword said:
Have you tried flashing a different kernel? Terrasilent also gave me some weird in that after a few days my device would boot into recovery by itself then wipe all my data in that only my system apps would remain. So it's a little different than what's happened to you. I ended up using klin's R3 kernel or Steven's kernel that fixed the issue.
Sent from my YP-G1 using xda app-developers app
Click to expand...
Click to collapse
I've got huge issue with steve's kernel. You can get into recovery, but once you booted in it will simply bootloop. Then you have to flash back with odin. So if you go with steve's kernel, don't boot into recovery. As for klin's kernel, I've never tried it, and will probably never as we have some really nice jellybean rom that I recommend you.
I never got that issue with steve's kernel.
Sent from my YP-G1 using xda app-developers app
obscuresword said:
Have you tried flashing a different kernel? Terrasilent also gave me some weird in that after a few days my device would boot into recovery by itself then wipe all my data in that only my system apps would remain. So it's a little different than what's happened to you. I ended up using klin's R3 kernel or Steven's kernel that fixed the issue.
Sent from my YP-G1 using xda app-developers app
Click to expand...
Click to collapse
Actually, with my problem, my system apps did remain, so it's almost the same problem, only my device didn't boot into recovery on its own (seriously, it booted into recovery on its own and wiped the data? ). I only installed the terrasilent kernel to be able to upgrade to JB, so I'm now on JB, running into different problem (the wrong settings are being backed up from google backup, they're restoring from my galaxy mini 2), but thanks anyway. I am really not having any luck at all with this whole update . But ti-pich, I agree with you, that JB rom is awesome
trainman261 said:
Actually, with my problem, my system apps did remain, so it's almost the same problem, only my device didn't boot into recovery on its own (seriously, it booted into recovery on its own and wiped the data? ). I only installed the terrasilent kernel to be able to upgrade to JB, so I'm now on JB, running into different problem (the wrong settings are being backed up from google backup, they're restoring from my galaxy mini 2), but thanks anyway. I am really not having any luck at all with this whole update . But ti-pich, I agree with you, that JB rom is awesome
Click to expand...
Click to collapse
Yes it did, after 1 week. I was like ???. I reflashed it again and it did the same exact thing, and it happened to me while I was at my college too.
I also had that same issue where it was restoring from the wrong device. I just had to reflash the rom, and install stuff manually because it was making my device horribly slow.
obscuresword said:
Yes it did, after 1 week. I was like ???. I reflashed it again and it did the same exact thing, and it happened to me while I was at my college too.
I also had that same issue where it was restoring from the wrong device. I just had to reflash the rom, and install stuff manually because it was making my device horribly slow.
Click to expand...
Click to collapse
Wow that is some scary stuff, now I know why every kernel/ROM/mod has a disclaimer at the beginning ... I'm glad I'm off that now and on a stable JB build now. I found a way to have it restore at least some of the stuff from when it was on gingerbread (mostly apps and appdata, no WiFi passwords or other settings - at least I'm pretty sure, I'm still working on getting all the stuff up and running) - go into a terminal, and type
Code:
bmgr list sets
It will probably have two different sets, one for when it was on GB and one for JB - or that is, if you had the problem, there will probably be a third set for a different device (maybe more). Then, choose the one you want to restore from, and type
Code:
bmgr restore xxxxxxxxxxxxxxxx
and replace xxxxxxxxxxxxxxxx with the apropriate ID from the command before. I'm having to type it several times in order to get it to work - I type it once, it restores some apps, then stops, I type it again, and it restores some more - but I'm hoping it gets as much possible onto the JB build. I guess this won't help you much, I've seen you saying on the ICS and JB threads that you've upgraded a while ago, but I guess if someone else comes along with the same problem, I hope it will help
trainman261 said:
Wow that is some scary stuff, now I know why every kernel/ROM/mod has a disclaimer at the beginning ... I'm glad I'm off that now and on a stable JB build now. I found a way to have it restore at least some of the stuff from when it was on gingerbread (mostly apps and appdata, no WiFi passwords or other settings - at least I'm pretty sure, I'm still working on getting all the stuff up and running) - go into a terminal, and type
Code:
bmgr list sets
It will probably have two different sets, one for when it was on GB and one for JB - or that is, if you had the problem, there will probably be a third set for a different device (maybe more). Then, choose the one you want to restore from, and type
Code:
bmgr restore xxxxxxxxxxxxxxxx
and replace xxxxxxxxxxxxxxxx with the apropriate ID from the command before. I'm having to type it several times in order to get it to work - I type it once, it restores some apps, then stops, I type it again, and it restores some more - but I'm hoping it gets as much possible onto the JB build. I guess this won't help you much, I've seen you saying on the ICS and JB threads that you've upgraded a while ago, but I guess if someone else comes along with the same problem, I hope it will help
Click to expand...
Click to collapse
hmmm. I'm about to try Terrasilent with my YP-G1 (US version) running 2.3.6. This is giving me second thoughts. Does this kernel still cause issues with SGP 4.0s running GB 2.3.6?? Maybe I should try the old Steves Kernel? I just want to use voodoo sound - thats really the only reason I want to root and get these kernels.
Hi all,
This is the first time I've tried installing a custom ROM on my VZW S4 (i545) (MDK firmware. Yes, I held out on the OTA since May). I've got a few thoughts and a couple of questions I was hoping could be addressed. I consider myself familiar with flashing ROM's and whatnot, so I won't need hand-holding steps in answer to my questions.
Some info:
VZW S4
MDK Firmware
Recovery: OUDhs CWM Touch Req0very v1.0.3.5
I haven't taken any OTA since I got the phone back in May. This leads me to believe (correct me if I'm wrong) that I'm on Android 4.2.2?
Current ROM: AOKP Nightly Build for 10/31/2013 (MR2)
Thoughts: Holy hell, this ROM is BLAZING fast. I am missing a few features, but none I use regularly (I don't use any of the TouchWiz "smart" features. Damn battery hogs). I was able to flash this over and install GAPPS without any problems. Loading time is incredible, and I love how clean the interface is.
Questions:
Can anyone help me figure out why I cannot install CM10.2? Not sure if that's because I downloaded the wrong version or something, but after flashing it, the screen stays stuck at the Galaxy S4 logo and doesn't move. Maybe I didn't wait long enough, but it surely didn't move in any reasonably expected time (AOKP, by comparison, loaded probably <1 minute). Any thoughts on why this might be? I really want to try CM10.2, so perhaps I should try a different build?
Another question/concern: I downloaded a few different ROMs last night -- CM10.2, AOKP and st0ckdr0id. AOKP installed fine, CM10.2 froze up, but when I installed st0ckdr0id (after wiping out, of course), I got what I think is referred to as a kernel panic. The message was similar to "This phone has software installed on it that Verizon Wireless has determined to be unsafe. Please power off the phone and take to the nearest Verizon Wireless store for help". In the top-left corner, it had in bold RED letters "Kernel secure: FAIL" (or similar wording). I fixed this by booting back into recovery, wiping out, and then installing AOKP again. Can anyone help me understand why this happened?
Why is only ~10GB of space still available when I -thought- I wiped out everything?
What I'm really searching for is an AOSP ROM that is very clean and light, but has SOME of the TouchWiz features. Any recommendations?
My phone only shows me as having a 3G connection, where normally I have 4G LTE. Anything I can do to fix this? Is this an issue with the ROM not detecting the right kind of radio? Bug report, perhaps?
I can't mount my external_sd in my CWM anymore. Yes, I used to be able to do it at one point, because I've done an external nandroid backup to it from within CWM in the past (as of October 29th, if the date on the backups is correct). I've read in other Google searches that it has something to do with the formatting of the SD card, but I haven't removed that SD card from my phone in a few months to have adjusted anything to do with formatting. I plugged the memory card into my Linux laptop this morning while diagnosing this and got an error about an unknown exfat partition. Any advice would be greatly appreciated.
Stupid question: Is there a way to -completely- wipe my internal SD card clean of all my current files? I know when I "wipe" /data I can still see all of my files from the previous installation, and I'm not ballsy enough to wipe /sdcard. I guess the question that then coincides with this is if I were able to completely wipe the phone, I assume that would wipe the recovery as well?
Sorry for some of the novice questions -- I have no problem messing with my old TF300T tablet (because NVFlash will save the day), but this is my only phone, only line of communication and SOLE way for me to answer calls for work (24/7 rotating on-call), so it is VERY important to me to ask questions and not go down for more than 1 hour.
Thanks for all help guys, its much appreciated. I hope to be able to test ROMs regularly and maybe start posting video reviews or something, who knows?
Thanks,
Opethfan89
opethfan89 said:
Hi all,
This is the first time I've tried installing a custom ROM on my VZW S4 (i545) (MDK firmware. Yes, I held out on the OTA since May). I've got a few thoughts and a couple of questions I was hoping could be addressed. I consider myself familiar with flashing ROM's and whatnot, so I won't need hand-holding steps in answer to my questions.
Some info:
VZW S4
MDK Firmware
Recovery: OUDhs CWM Touch Req0very v1.0.3.5
I haven't taken any OTA since I got the phone back in May. This leads me to believe (correct me if I'm wrong) that I'm on Android 4.2.2?
Current ROM: AOKP Nightly Build for 10/31/2013 (MR2)
Thoughts: Holy hell, this ROM is BLAZING fast. I am missing a few features, but none I use regularly (I don't use any of the TouchWiz "smart" features. Damn battery hogs). I was able to flash this over and install GAPPS without any problems. Loading time is incredible, and I love how clean the interface is.
Questions:
Can anyone help me figure out why I cannot install CM10.2? Not sure if that's because I downloaded the wrong version or something, but after flashing it, the screen stays stuck at the Galaxy S4 logo and doesn't move. Maybe I didn't wait long enough, but it surely didn't move in any reasonably expected time (AOKP, by comparison, loaded probably <1 minute). Any thoughts on why this might be? I really want to try CM10.2, so perhaps I should try a different build?
Another question/concern: I downloaded a few different ROMs last night -- CM10.2, AOKP and st0ckdr0id. AOKP installed fine, CM10.2 froze up, but when I installed st0ckdr0id (after wiping out, of course), I got what I think is referred to as a kernel panic. The message was similar to "This phone has software installed on it that Verizon Wireless has determined to be unsafe. Please power off the phone and take to the nearest Verizon Wireless store for help". In the top-left corner, it had in bold RED letters "Kernel secure: FAIL" (or similar wording). I fixed this by booting back into recovery, wiping out, and then installing AOKP again. Can anyone help me understand why this happened?
Why is only ~10GB of space still available when I -thought- I wiped out everything?
What I'm really searching for is an AOSP ROM that is very clean and light, but has SOME of the TouchWiz features. Any recommendations?
My phone only shows me as having a 3G connection, where normally I have 4G LTE. Anything I can do to fix this? Is this an issue with the ROM not detecting the right kind of radio? Bug report, perhaps?
I can't mount my external_sd in my CWM anymore. Yes, I used to be able to do it at one point, because I've done an external nandroid backup to it from within CWM in the past (as of October 29th, if the date on the backups is correct). I've read in other Google searches that it has something to do with the formatting of the SD card, but I haven't removed that SD card from my phone in a few months to have adjusted anything to do with formatting. I plugged the memory card into my Linux laptop this morning while diagnosing this and got an error about an unknown exfat partition. Any advice would be greatly appreciated.
Stupid question: Is there a way to -completely- wipe my internal SD card clean of all my current files? I know when I "wipe" /data I can still see all of my files from the previous installation, and I'm not ballsy enough to wipe /sdcard. I guess the question that then coincides with this is if I were able to completely wipe the phone, I assume that would wipe the recovery as well?
Sorry for some of the novice questions -- I have no problem messing with my old TF300T tablet (because NVFlash will save the day), but this is my only phone, only line of communication and SOLE way for me to answer calls for work (24/7 rotating on-call), so it is VERY important to me to ask questions and not go down for more than 1 hour.
Thanks for all help guys, its much appreciated. I hope to be able to test ROMs regularly and maybe start posting video reviews or something, who knows?
Thanks,
Opethfan89
Click to expand...
Click to collapse
Wow that's a lot. Let's see if we can get you answers.
1. Switch recoveries to twrp 2.5.0.2. I can't stress the importance of the particular version enough. There are others. This is absolutely the most stable. It's what the devs use. I think then your cm issue will be resolved.
Correct way to wipe with twrp.
1.wipe - >factory reset.
2. Advanced wipe - >check system, data, davlik, cache then wipe.
3. The go back to main screen and install rom.
2. Answered by answer one. Lots of people have lots of opinions about the various recoveries. All I can tell you is this is what all the devs use for their recovery. Can't argue with that.
3. Reserved space. It might say you have 16 gigs but a good size chunk is taking merely by formatting. Then the ROM and programs you have installed of course.
4. Honestly they are all freaking great. The aosp roms. You do the answer to number one and you can find out. DU is my fav @ this moment. Followed by beanstalk.
5. Go to mobile networks make sure your network mode is set to cdma +lte/evdo.
6. Answer 1.
7. You don't really want to wipe the entire internal SD card. Sounds good when you think it might screw you if you did it.
Sent from my Nexus 7 using xda app-developers app
Mightycaptain said:
Wow that's a lot. Let's see if we can get you answers.
1. Switch recoveries to twrp 2.5.0.2. I can't stress the importance of the particular version enough. There are others. This is absolutely the most stable. It's what the devs use. I think then your cm issue will be resolved.
Correct way to wipe with twrp.
1.wipe - >factory reset.
2. Advanced wipe - >check system, data, davlik, cache then wipe.
3. The go back to main screen and install rom.
2. Answered by answer one. Lots of people have lots of opinions about the various recoveries. All I can tell you is this is what all the devs use for their recovery. Can't argue with that.
3. Reserved space. It might say you have 16 gigs but a good size chunk is taking merely by formatting. Then the ROM and programs you have installed of course.
4. Honestly they are all freaking great. The aosp roms. You do the answer to number one and you can find out. DU is my fav @ this moment. Followed by beanstalk.
5. Go to mobile networks make sure your network mode is set to cdma +lte/evdo.
6. Answer 1.
7. You don't really want to wipe the entire internal SD card. Sounds good when you think it might screw you if you did it.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your response Mightycaptain! I used CWM as my first ever recovery and am kinda pressed on it, which is why I use it, but I have no issues going to TWRP if that means fixing my issues. Can you elaborate on how to install TWRP in place of my current CWM? I'll do some Googling in the meantime to try to find the answer myself. (I haven't done any flashing or rooting stuff since I got the phone in May!!)
Thanks for your answer in #5. Fixed the issue I was having.
My reason for wanting to wipe the entire internal SD card is there are still files, folders, logs and backups from when I had my previous ROM. I'm having issues restoring my nandroid backup from the night of the 7th so is it at all possible for me to salvage some of my settings, apps and file backups from those existing files? Once I fix my nandroid, I'm going to keep the nandroid backup in a safe place and I ideally want to have a completely clean phone to start from: That means getting rid of all those old files and other nonsense from before. Is this a possibility?
I'm going to spend my time today trying to extract data from my nandroid backups using ROM Toolbox Pro. If that doesn't work, I have a nandroid backup from the 31st that has 99% of the stuff I need so I'll try to restore that. If THAT doesn't work, then I'm going to cry myself to sleep while trying to remember all of my contacts
Wish me luck, and hopefully I can get some answers to my last few questions!
Thanks,
Opethfan89
opethfan89 said:
Thanks for your response Mightycaptain! I used CWM as my first ever recovery and am kinda pressed on it, which is why I use it, but I have no issues going to TWRP if that means fixing my issues. Can you elaborate on how to install TWRP in place of my current CWM? I'll do some Googling in the meantime to try to find the answer myself. (I haven't done any flashing or rooting stuff since I got the phone in May!!)
Thanks for your answer in #5. Fixed the issue I was having.
My reason for wanting to wipe the entire internal SD card is there are still files, folders, logs and backups from when I had my previous ROM. I'm having issues restoring my nandroid backup from the night of the 7th so is it at all possible for me to salvage some of my settings, apps and file backups from those existing files? Once I fix my nandroid, I'm going to keep the nandroid backup in a safe place and I ideally want to have a completely clean phone to start from: That means getting rid of all those old files and other nonsense from before. Is this a possibility?
I'm going to spend my time today trying to extract data from my nandroid backups using ROM Toolbox Pro. If that doesn't work, I have a nandroid backup from the 31st that has 99% of the stuff I need so I'll try to restore that. If THAT doesn't work, then I'm going to cry myself to sleep while trying to remember all of my contacts
Wish me luck, and hopefully I can get some answers to my last few questions!
Thanks,
Opethfan89
Click to expand...
Click to collapse
Check my post here for twrp 2.5.0.2.
http://forum.xda-developers.com/showthread.php?p=47275165
You can flash it in your current recovery. It overwrites CWM. I would make sure you have a flashable for CWM just in case you need to go back for some reason. Also the backups between those 2 recoveries are not compatible. But I would nandroid with CWM before flashing twrp. I would also change were you recovery is pointing to for storage to the external SD if you haven't already. After you have cut your current backup and past it there. You can use rom toolbox pro to back up your contacts and restore it once you flash a new ROM.
Now as good advice going forward I would add your contacts to your Google account. That way when you flash new stuff or drop your phone in the toilet as soon as you add your Google account to the phone all those contacts will automatically download. But it is always a good idea to use tibu or rom toolbox pro to back up all your apps and seeing and use that after flashing roms to restore apps and settings.
But honestly I'd nandroid, move my contacts to Google, make app backups. Flash twrp. Then start flashing roms. You could be doing it in an hour. After you flash twrp make another nandroid so you have a twrp compatible backup. Then in a day or so of you are happy with everything delete the CWM backups for space.
Edit: as to extracting things from your current nandroid. Not sure if that is possible for one thing it is compressed not sure how that would work unless you are doing a full restore.
Also for future reference with TWRP. When restoring nandroid wipe like your flashing a new rom before restoring.
Sent from my SCH-I545 using xda app-developers app
Mightycaptain said:
Check my post here for twrp 2.5.0.2.
http://forum.xda-developers.com/showthread.php?p=47275165
You can flash it in your current recovery. It overwrites CWM. I would make sure you have a flashable for CWM just in case you need to go back for some reason. Also the backups between those 2 recoveries are not compatible. But I would nandroid with CWM before flashing twrp. I would also change were you recovery is pointing to for storage to the external SD if you haven't already. After you have cut your current backup and past it there. You can use rom toolbox pro to back up your contacts and restore it once you flash a new ROM.
Now as good advice going forward I would add your contacts to your Google account. That way when you flash new stuff or drop your phone in the toilet as soon as you add your Google account to the phone all those contacts will automatically download. But it is always a good idea to use tibu or rom toolbox pro to back up all your apps and seeing and use that after flashing roms to restore apps and settings.
But honestly I'd nandroid, move my contacts to Google, make app backups. Flash twrp. Then start flashing roms. You could be doing it in an hour. After you flash twrp make another nandroid so you have a twrp compatible backup. Then in a day or so of you are happy with everything delete the CWM backups for space.
Edit: as to extracting things from your current nandroid. Not sure if that is possible for one thing it is compressed not sure how that would work unless you are doing a full restore.
Also for future reference with TWRP. When restoring nandroid wipe like your flashing a new rom before restoring.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Hey thanks again for your quick response!! I'm glad I checked this first, because I'm in my ROM Toolbox app atm and it has an option to let me install TWRP 2.5.0.2 from within the app itself. Should I do it this way?
I will be adding all contacts to Google from now on. Unfortunately I saved all my stuff to my Verizon backup assistant so I just need one last shot at my phone to save all those contacts (manually, if I must) and be able to enter them onto the new ROM.
By "flash it in your current recovery" I assume you mean download the .zip, place it on my internal /sdcard, and then "flash" it just like I would flash a ROM, right?
I'm sure I have a "flashable" for CWM somewhere but like I said, I haven't done any of this stuff on this phone since I first bought it, and things have changed so much with everyone having OTA's and being locked out that I'm not sure what process is the same or what has changed. I can't afford to lose this phone so I'm hesitant to go balls to the wall to try things.
I will try the things you've listed here. Seems like a nandroid + TiBu + Google Contacts is my best bet to get up and running each time I decide to try a new ROM.
Thanks again!
opethfan89 said:
Hey thanks again for your quick response!! I'm glad I checked this first, because I'm in my ROM Toolbox app atm and it has an option to let me install TWRP 2.5.0.2 from within the app itself. Should I do it this way?
I will be adding all contacts to Google from now on. Unfortunately I saved all my stuff to my Verizon backup assistant so I just need one last shot at my phone to save all those contacts (manually, if I must) and be able to enter them onto the new ROM.
By "flash it in your current recovery" I assume you mean download the .zip, place it on my internal /sdcard, and then "flash" it just like I would flash a ROM, right?
I'm sure I have a "flashable" for CWM somewhere but like I said, I haven't done any of this stuff on this phone since I first bought it, and things have changed so much with everyone having OTA's and being locked out that I'm not sure what process is the same or what has changed. I can't afford to lose this phone so I'm hesitant to go balls to the wall to try things.
I will try the things you've listed here. Seems like a nandroid + TiBu + Google Contacts is my best bet to get up and running each time I decide to try a new ROM.
Thanks again!
Click to expand...
Click to collapse
Understand the hesitancy completely. But with nodding comes risk. It is always about whether you can accept the worst possible outcome.
Rom toolbox pro flashing recovery? I don't know never tried it.
Yes I would download the recovery. Leave it on SD card reboot to recovery and flash like a rom.
Yes nandroid tibu and saving your contacts to Google is the quickest way to get up and running again.
Sent from my SCH-I545 using xda app-developers app
Mightycaptain said:
Understand the hesitancy completely. But with nodding comes risk. It is always about whether you can accept the worst possible outcome.
Rom toolbox pro flashing recovery? I don't know never tried it.
Yes I would download the recovery. Leave it on SD card reboot to recovery and flash like a rom.
Yes nandroid tibu and saving your contacts to Google is the quickest way to get up and running again.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Mighty, just wanted to report that flashing TWRP 2.5.0.2 from within ROM Toolbox Pro worked like a charm. I'm on TWRP as we speak.
Thank you so much for your responses. If anyone else has anything to add, or a different response to my questions, please do so! In the meantime, I'm going to try to figure out how to get my nandroid backup working...
Cheers!
*EDIT* Made a backup with TWRP (whose interface is bloody phenomenal, btw), flashed CWM and its working like a charm!! Going to try the st0ckdr0id one as well. Still working on getting that nandroid working so I can recover my stuff and get to customizing!