Hello,
I´ve done some testing to figure out what causes the "wake up lag" on the latest Samsung JB 4.3 Firmware. This Firmware is unfinished as many of you may have noticed.
There are a few missing features or semi broken.
Ok, let´s start with some notices, on some devices you can notice a wake up lag when trying to wake your phone up. It may take several seconds for the screen to appear and to react.
There are a few possibilities to at least greatly reduce the wakeup time:
You´ll need to have a rooted Firmware installed and Trickster Mod ( any similar app will also work ).
These are the methods I´ve tried and figured out:
1) Some people suggest to change the used CPU governor from PegasusQ to ondemand.
While this actually helps to reduce the lag, it is a very bad idea. Ondemand is a generic governor in the linux kernel and does not support CPU Hotplugging. This will result in either a way to big battery drain since the cores will tend to run at full speed most the time, even in idle situations or severe lags.
2) Samsung introduced in the JB 4.2.1 , 4.2.2 and now 4.3 Firmware the usage of zRAM to his kernel.
While zRAM can actually help to improve multitasking, it also needs some extra cpu power which can also cause a higher battery drain. ( which would be very low and not noticeable at all if implemented the right way )
You can disable zRAM with Trickster Mod or any other, similar app. I´ve noticed that by doing this, the wakeup lag was greatly reduced and nearly gone. It takes about 1-2 seconds for the screen to turn on again.
To make sure you´ve disabled zRAM, use a terminal emulator and type "free".
3) Use an alternative kernel: Samsung has released the required kernel sources for JB 4.3 very fast this time.
Yank555, a well known and skilled developer has already built the first custom kernel for JB 4.3. By installing this kernel and using a different cpu governor than PegasusQ ( eg. zzmoove ), you will also notice a greatly reduced wakeup lag and also a better battery consumption.
Get this kernel directly from Yank555 here, you´ll have to create a forum account first:
http://yank555-lu.net/viewtopic.php?p=3#p3
Notice: If this kernel breaks your root, you´ll have to install this package again:
http://download.chainfire.eu/345/
Hopefully you´ll manage to reduce the wakeup lag by trying my methods
Feel free to leave your comments and tell me what worked out best for you.
Creating a separate forum and not releasing sources as gpl for one kernel is such a lame ass move.
Yes, i feel great improvement with Yank's kernel about wake up lag.
Thx for the info
Hi Victorator,
Please don't judge about this topic when you don't know the history and why yank made this decision. If you followed other kernel threads you had seen that yank is a role model when it is about helping and sharing.
Best regards,
Matt
Gesendet von meinem GT-I9300 mit Tapatalk 2
victorator said:
Creating a separate forum and not releasing sources as gpl for one kernel is such a lame ass move.
Click to expand...
Click to collapse
Yank? He shares more than anybody here. Everyone uses his zzmoove setup. Plus, he used to have a thread here before AndreiLux kept on harassing him. That was the last straw for him.
It's his decision to not post here. It kinda sucks but we should respect it at least.
I also noticed if you are using WiFi - change advanced settings - set from DHCP to Static.
There was still a small screen on lag (about 1 second) but significantly less then with DHCP.
jinosong said:
Yank? He shares more than anybody here. Everyone uses his zzmoove setup. Plus, he used to have a thread here before AndreiLux kept on harassing him. That was the last straw for him.
It's his decision to not post here. It kinda sucks but we should respect it at least.
Click to expand...
Click to collapse
Accidentally press thanks button on the post above. Annoying xda app.
Big plus 1 for your comments. Wonder if OP got permission from yank to post his kernel here. Whatever the reasons and whatever arguments involved, we should respect his decision which clearly stated in his forum. Furthermore, this thread doesn't belong here imho, no development thus should be in general.
Sent from my GT-I9300 using xda app-developers app
JP doesn´t mind if I post a link to his forum, for the guys who want to use his kernel. However, he doesn´t accept hot links directly to his webspace or alternative links to other webspace..
I respect his work and have mentioned his kernel in a way which is acceptable to all of us. Just in case JP doesn´t want his work to be mentioned, I´m going to remove the link to his forum.
Are there anyway to fix app opening lag. Specially dialler, gallery.
Sent from my GT-I9300 using Tapatalk
Im running his 4.3 release on Omega v51 (4.3) currently in beta stage and its great.Was a big fan of his work while he was here on XDA and followed him to his site to continue using his work too on my S3 through-out 4.1.2.Shame he had to leave like that but at least he still Devs.
Could someone test something ???
I disable the LockScreen and know when i push the power button my screen opens immediately.
I use this LockScreen https://play.google.com/store/apps/details?id=com.lockscreen.galaxy
The result is when i push the power button my screen opens immediately
So maybe the problem with lag is the LockScreen ???
omek07 said:
Could someone test something ???
I disable the LockScreen and know when i push the power button my screen opens immediately.
I use this LockScreen https://play.google.com/store/apps/details?id=com.lockscreen.galaxy
The result is when i push the power button my screen opens immediately
So maybe the problem with lag is the LockScreen ???
Click to expand...
Click to collapse
Hmm. Your argument seems legit. But what could possible go wrong with the lock screen?
supreethms said:
Hmm. Your argument seems legit. But what could possible go wrong with the lock screen?
Click to expand...
Click to collapse
Maybe it use much ram and Cpu to open ???
android addicts said:
Are there anyway to fix app opening lag. Specially dialler, gallery.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
There doesn't seem to be lags with dialer or gallery. I use the S4 gallery as a replacement to the default 4.3 gallery app that came with the update..
both of them seem to work perfectly fine..
---------- Post added at 09:40 PM ---------- Previous post was at 09:39 PM ----------
omek07 said:
Maybe it use much ram and Cpu to open ???
Click to expand...
Click to collapse
And that's what is perfectly managed with Sir yank's kernel.
Use of zram for multitasking, etc might be the solutions. But that kernel solves the problems..
Yank555.lu Android Stuff - Registration
Your IP 122.174.76.19 has been blocked because it is blacklisted. For details please see h**p://www.sorbs.net/lookup.shtml?122.174.76.19.
Your IP 122.174.76.19 has been blocked because it is blacklisted. For details please see h**p://www.barracudacentral.org/lookups/ip-reputation?ip_address=122.174.76.19.
An entry on the blacklist may have several reasons:
1. You are a well-known spammer.
2. Last time a well-known spammer was using the dynamic IP address which you got from your ISP (Internet Service Provider), your e-mail address or the username you have choosen.
3. Your ISP is well-known for a lot of spamming customers and is not fighting against spammers enough.
Please note that you will need to enter a valid e-mail address before your account is activated. You will receive an e-mail at the address you provide that contains an account activation link.
It is a shame we have to go to a separate site and register to get this kernel. Hope the Dev decides to come back to XDA.
abdulhamid1978 said:
It is a shame we have to go to a separate site and register to get this kernel. Hope the Dev decides to come back to XDA.
Click to expand...
Click to collapse
He never left...
http://forum.xda-developers.com/showpost.php?p=47232379&postcount=59
drashran said:
Yank555.lu Android Stuff - Registration
Your IP 122.174.76.19 has been blocked because it is blacklisted. For details please see h**p://www.sorbs.net/lookup.shtml?122.174.76.19.
Your IP 122.174.76.19 has been blocked because it is blacklisted. For details please see h**p://www.barracudacentral.org/lookups/ip-reputation?ip_address=122.174.76.19.
An entry on the blacklist may have several reasons:
1. You are a well-known spammer.
2. Last time a well-known spammer was using the dynamic IP address which you got from your ISP (Internet Service Provider), your e-mail address or the username you have choosen.
3. Your ISP is well-known for a lot of spamming customers and is not fighting against spammers enough.
Please note that you will need to enter a valid e-mail address before your account is activated. You will receive an e-mail at the address you provide that contains an account activation link.
Click to expand...
Click to collapse
Use opera mini or another browser that gives you an ip number instead of your own, I had the same issue.
AFAIK, OnDemand does Hotplug, it does on the S4.
Hi. Which goverors are available if I use Trickster Mod (or similar) with the stock 4.3 kernel? As you write that ondemand is not good, is there any govenor available which solves the wakeup delay and is recommended?
I´m just searching for a slim solution to eliminate that wakeup delay, I don´t want to flash a custom kernel.
Thanks fpr help
Related
Hi!
My Hero has had problems with the trackball not working for a couple of months but I haven't been bothered by it since I never use it. Lately however, the trackball (or it's sensors on the board) seems to have gotten a life of it's own. It's constantly scrolling upwards making it impossible to navigate in menus and send text messages.
I've read many many threads about people wanting to completely disable the trackball but noone seems to have any idea on how. I've also tried cleaning. If anyone knows about a solution to make the trackball not load when the basic IO functions loads I would be very happy indeed. The problem is not ROM specific since the scrolling occurs in the recovery menu as well.
If it's not possible to "deactivate" it I'm curious if you think it would be possible to write a tiny little background app that listens for the trackballs MotionEvent, catches it, does nothing and then returns true as if the handler in the background app took care of all the work and thus overrides the scrolling that would happend in the browser, menu or whichever context you are in?
The method I've been looking at is: public boolean onTrackballEvent (MotionEvent event)
What do you think?
span_01 said:
Hi!
My Hero has had problems with the trackball not working for a couple of months but I haven't been bothered by it since I never use it. Lately however, the trackball (or it's sensors on the board) seems to have gotten a life of it's own. It's constantly scrolling upwards making it impossible to navigate in menus and send text messages.
I've read many many threads about people wanting to completely disable the trackball but noone seems to have any idea on how. I've also tried cleaning. If anyone knows about a solution to make the trackball not load when the basic IO functions loads I would be very happy indeed. The problem is not ROM specific since the scrolling occurs in the recovery menu as well.
If it's not possible to "deactivate" it I'm curious if you think it would be possible to write a tiny little background app that listens for the trackballs MotionEvent, catches it, does nothing and then returns true as if the handler in the background app took care of all the work and thus overrides the scrolling that would happend in the browser, menu or whichever context you are in?
The method I've been looking at is: public boolean onTrackballEvent (MotionEvent event)
What do you think?
Click to expand...
Click to collapse
Maybe its just too much kernel compiling talking, but I would just kill it the kernel level - sounds easiest to me
Let me know if you want me to look into this, and nag me if I forgot....
Killing this at kernel level would be fantastic if its possible. You would be more than welcome to have a look at this.
I have no knowledge of where to start looking since I know very little about any kernel. I am very interested in learning more though so if you do not have time at the moment I would be very glad if you could provide some pointer on where to start looking.
This would be amazing if possible, my guess would be the kernel too.
I was using all the time at first, but now it's more of a hassle than anything else.
span_01 said:
Killing this at kernel level would be fantastic if its possible. You would be more than welcome to have a look at this.
I have no knowledge of where to start looking since I know very little about any kernel. I am very interested in learning more though so if you do not have time at the moment I would be very glad if you could provide some pointer on where to start looking.
Click to expand...
Click to collapse
Ok, I'll try to get around to it in the next couple of days, bump this or even PM me if I forget.
In the meantime if you want to get your hands dirty in kernel code, heres the section about "my" sources from my flykernel post:
erasmux said:
Kernel Sources
My sources with all my updates and changes are found on github:
http://github.com/erasmux/hero-2.6.29-flykernel
Use hero_defconfig for the regular version and hero-bfs_defconfig for the BFS version.
See the wiki for more information about building the kernel. Another great resource about kernel building is the cyanogen wiki - do note that currently the CM kernel will not work on the hero.
Please feel free to contact me regarding my sources and kernel development.
Click to expand...
Click to collapse
erasmux said:
Ok, I'll try to get around to it in the next couple of days, bump this or even PM me if I forget.
In the meantime if you want to get your hands dirty in kernel code, heres the section about "my" sources from my flykernel post:
Click to expand...
Click to collapse
Thank-you kernel king! Will have to put on some gloves and dig around the source this weekend!
Sent from my HTC Hero using XDA App
Any luck yet?
Nope, not yet. I have not had much time to look into this. Being a complete novice it will probably take me some time
Sent from my HTC Hero using XDA App
I've now found a solution to this that I'm testing out. I've recompiled FlyKernel with a small customisation and it seems stable enough. PM me if you want to see the change or need a flashable zip.
Right so now that most SGS2 kernels are using BLN, and that most users want it, it would make sense to enable stock samsung apps to utilise this feature.
SMS
Phone
Now they obviously do not call any lights as Samsung were aware that there was no LED on this phone.
This would need to be hacked probably at the smali level. Does anyone want to give it a go?
Pulser of TeamVillain said he will look into it at some point, but he is rather busy at the moment so I thought I would open up the idea to everyone.
Edit: Ok so apparently phone works, it is just SMS that needs modifying.
SMS and phone are working for me, SMS with stock/go sms and phone with BLN pro so what' s the problem?
Sent from my GT-I9100 using XDA App
TvBTvB said:
SMS and phone are working for me, SMS with stock/go sms and phone with BLN pro so what' s the problem?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Samsung stock sms app and stock phone app do not generate any call for lights therefore BLN does not flash when you get an sms or missed call.
if you use a third party sms app then that will work, but not the stock apps.
EarlZ said:
Really, your probably the only one to have it working with stock sms app unless there was an update that im not aware.
Click to expand...
Click to collapse
Agree, stock SMS doesn't
But phone does blink.
Yes, Phone apk is triggering. Only SMS is not working, but I also like to see modified SMS APK because 3rd party SMS APK do not fit to the design of the Samsung Software. (only my 2 centz)
If you use the tasker app, you can set up notifications of the bln for any notification.
I have set it up for gReader, K-9 mail and a recieved text
ithehappy said:
In General? Well if it doesn't work for Missed Call notification or SMS then where would it work? I am getting confused here!
Click to expand...
Click to collapse
android has far more notifications than just missed calls and sms.... most apps generate some form of notification (twitter...email..gmail..g+...facebook etc etc)
they all work in the free version except for Missed calls.
currently Stock Samsung Messaging app does not work at all! but we are trying to fix this.
To obtain led notification for a samsung app you need to do the following:
Locate the place where the notification is instantiated and add the necessary flags to the notification. And secondly you need to locate the place where the screen is turned on, either a full or dimmed wakelock (bad implementation) or a call to setKeepScreenOn() or some parameter in WindowManager.LayoutParams is set.
In the meantime while we wait for TeamVillain to modify the stock messaging app, you can make use of Tasker in combination of BLN pro to activate blinking lights when SMS is received. http://forum.xda-developers.com/showthread.php?t=1203005
I would suggest you read what is posted by the OP and do the profiles manually.
PS. this recommendation is for people who knows what is Tasker, BLN Pro and more importantly, liblights.so.
THIS IS THE CURRENT SITUATION WITH BLN AS OF 2011-08-05:
You need a modified liblights. If you don't know what this is, start using the search function. If you still can't find it after using the search function, you're too stupid to even be attempting any of this, stop immediately or find a custom ROM that provides a modified liblights.
You need a modified kernel.
You need the BLN control application. To get blinking lights or notifications from missed calls in the stock phone app, you need the Pro version.
As mentioned IN THE ORIGINAL POST, the stock SMS app does not trigger BLN by default so you need a third party SMS app such as Handcent, or an app such as Tasker to set it up.
The following will be gibberish designed to make this post show up in most (logical) forum searches for how to get BLN working on the SGS2.
Expected search terms:
I am a giant moron who just cannot figure out how to get BLN working on my SGS2 Samsung Galaxy S II 9100 GT-I9100 BLN kernel how do I make BLN work what is liblights ahh life is so unfair expecting me to figure things out for myself my mummy told me I was a special snowflake that can do anything I set my precious little mind to I am her special soldier and life should just provide everything I want on a plate. BLN. BLN kernel. BLN liblights. BLN SMS. BLN. BLN. BLN.
ithehappy said:
I can't stop laughing. I'd like to know your age anyway . Course I know who you are.
Anyway, as an user I can confirm that BLN DOES NOT work with normal procedure, by that I mean, Flashing a BLN compatible kernel, Flashing Liblights.zip and Enable BLN, it will not work for Missed call, the max you can get is to have the notification under Test Section by pressing Power key.
Now I don't know what is modified kernel, modified liblights and blah blah and I don't wanna know, for a simple user like me, it didn't work, it's as simple as that.
Are we really living in a so smart world? I bet not.
Regards.
Sent from GT-I9100
Click to expand...
Click to collapse
Perhaps you missed the plethora of posts that point out that the missed call notification only works with the Pro version or from setting up Tasker. Which is quite amazing since ONE OF THE POSTS INFORMING YOU OF THIS FACT IS THE ONE YOU REPLIED TO.
However, you go right ahead consoling yourself with your assumption that the rest of the world is as bereft of common sense as you are. This is known as making excuses for your own inadequacies and expecting everyone else to come down to your level because you're a self centred moron with a clear and present over inflated sense of self entitlement.
If you don't want to know what a modified kernel and liblights is then may I politely ask, what in the bright luminous blue **** are you doing here on xda-DEVELOPERS? This isn't xda-holdthehandsofmorons nor is it xda-spoonfeedeveryilliteraterejectonearth. It's a site for people to develop for smartphones as part of a development community and for people to learn. As you've just confessed you have no interest in any of this can I point you in the direction of your nearest iphone supplier and give up your Android using spot to someone with an IQ greater than the number of digits on my hands? Thanks.
Oh, incidentally, this thread isn't a HLAP HOW AM MAKE BLN WERK WITH THANGS ON MAI POHNE", it's supposed to be a development discussion about modifying the stock Samsung apps so they work properly. Hence it's in the development section. Any more of this stupid off topic requests for spoon feeding and I'm going to start Reporting every post that isn't anything to do with the topic.
Hey all,
I have cleaned the thread from all the banter back and forth, which ended up de-railing this topic completely. I only left a few posts standing as they both relate to the discussion and address all the questions that were asked before the "cleaning"
Now, back on topic.
egzthunder1 said:
Hey all,
I have cleaned the thread from all the banter back and forth, which ended up de-railing this topic completely. I only left a few posts standing as they both relate to the discussion and address all the questions that were asked before the "cleaning"
Now, back on topic.
Click to expand...
Click to collapse
Thanks Egz!
and in order to stop it going off topic again, if you feel you need to make an off-topic post then do so in this thread - http://goo.gl/3Z2uf
Hacre said:
(logical)
Click to expand...
Click to collapse
Mate, logical? Come on now, you may be asking a bit much there...
Topic wise, nice to see a workaround for the stock sms app...
I think this was done on the Galaxy S by modifying services.jar.
This was posted in Hacre's kernel thread by member no.one.writeme. I didn't have a chance to test it though
QUOTE=no.one.writeme;16405075]BLN with stock Mms.apk XXKG6 odex if anyone care to test.
ONE.PT.XXKG6.Services.Patch.BLN.zip
ONE.PT.XXKG6.Services.Patch.BLN.DEODEX.zip
liblights included
jlevy73 said:
This was posted in Hacre's kernel thread by member no.one.writeme. I didn't have a chance to test it though
QUOTE=no.one.writeme;16405075]BLN with stock Mms.apk XXKG6 odex if anyone care to test.
ONE.PT.XXKG6.Services.Patch.BLN.zip
ONE.PT.XXKG6.Services.Patch.BLN.DEODEX.zip
liblights included
Click to expand...
Click to collapse
I just tested the deodexed version on villain 2.4.2 with ninphetamine 2.0.5 and it works perfectly, thanks a lot!!
Sent from my Nexus S using XDA Premium App
jlevy73 said:
This was posted in Hacre's kernel thread by member no.one.writeme. I didn't have a chance to test it though
QUOTE=no.one.writeme;16405075]BLN with stock Mms.apk XXKG6 odex if anyone care to test.
ONE.PT.XXKG6.Services.Patch.BLN.zip
ONE.PT.XXKG6.Services.Patch.BLN.DEODEX.zip
liblights included
Click to expand...
Click to collapse
Flashed on stock XXKG6 / ninphetamine 2.0.5, works perfect. Thanks.
jlevy73 said:
This was posted in Hacre's kernel thread by member no.one.writeme. I didn't have a chance to test it though
QUOTE=no.one.writeme;16405075]BLN with stock Mms.apk XXKG6 odex if anyone care to test.
ONE.PT.XXKG6.Services.Patch.BLN.zip
ONE.PT.XXKG6.Services.Patch.BLN.DEODEX.zip
liblights included
Click to expand...
Click to collapse
flashed the odexed version over leomar xg6 odexed rom and doesn't work.
flashed also the deodexed version and doesnt work.
terodeg said:
flashed the odexed version over leomar xg6 odexed rom and doesn't work.
flashed also the deodexed version and doesnt work.
Click to expand...
Click to collapse
Would love this working for other ROMs... I'm using Lite'ning Rom v6.1 XXKH3
Well, that time has come. I feel like our ROM is stable enough that I can finally proide support for it without you guys (unintentionally) clogging up the dev thread.
If you have a question, POST IT HERE. If you want to ask about install issues, how to get into devving, or rabid toasters, POST IT HERE. I am closing off the dev thread now that this is created. If you post there without a constructive helpful comment (I will put up criteria there), you will get yelled at, beaten, and sent to slink back to your hole from whence you came.
Okay, now that that's over, I will be providing support in this thread. I am not mean, scary, nasty, or like to drown puppies for fun, despite what the impression the above may give you. I am actually a very helpful person (as most pre-existing members here will agree), and will try to help you, even if you think it's a stupid question.
One rule here: Search first!
I cannot emphasize how important this is. As I said, I am more than happy to answer questions, but for the love of god please don't post something like "wherez the ICS guyzz, I don;t see it in this thrad, this forum sukks". Please use search first before posting. Thank you, and have a nice day.
Well, have fun, and I will answer any questions you have (even if they don't directly relate to ICS).
Install instructions:
Special thanks to daniel644 for the video and his high praises of me .
Guides (thanks to goldflame for these):
Drm manager
YOU MUST HAVE ROOT IN ORDER TO DO THIS!!!!
http://forum.xda-developers.com/showthread.php?p=31201787
Run this in terminal with su permissions
Open terminal Type su Accept the superuser request Follow the code from the post One condition if you reboot you have to repeat the third line of code.
This will fix the market
Here is rooting:
Download tsparky root on your computer from here: http://forum.xda-developers.com/showthread.php?p=31067529
Extract the zip plug in your Samsung, turn on USB debugging which can be found in settings-devoloper-usb debugging and run the bat file.
For those of you like me that when you open super user it fcs, here is a guide on how to fix that:
I have rooted, super user won't open now
OK follow theses steps
1) download and install Android commander (Google it)
1a) plug in your device and make sure USB debugging is on
2) open android commander
3) on the right panel go to /system/app and delete super user.apk
4) then go to /system/xbin and delete busybox and su
5) reboot and root again
Worked for me and two other people so it should work for you.
This is a good idea ... hopefully we will see more people pop in here than the dev thread, like to see you guys progress whenever possible and not so much "I need help installing this". I read a few posts of one of your guys requesting people to PM for help but maybe this thread will alleviate that "burden"...
da1writer said:
This is a good idea ... hopefully we will see more people pop in here than the dev thread, like to see you guys progress whenever possible and not so much "I need help installing this". I read a few posts of one of your guys requesting people to PM for help but maybe this thread will alleviate that "burden"...
Click to expand...
Click to collapse
Well, answering questions is not a "burden" more than it is something not 100% relevent to our dev thread, which (unfortunately) sometimes gets us off on a tangent. This way, I can help you guys, and we can still be productive in the original thread. Even if your question isn't relevant, pop me a PM, and I will be happy to help you, as long as you have researched first (meaning not stuff like "where's the stock rom"?).
hanthesolo said:
Well, answering questions is not a "burden" more than it is something not 100% relevent to our dev thread, which (unfortunately) sometimes gets us off on a tangent. This way, I can help you guys, and we can still be productive in the original thread. Even if your question isn't relevant, pop me a PM, and I will be happy to help you, as long as you have researched first (meaning not stuff like "where's the stock rom"?).
Click to expand...
Click to collapse
This is simply a suggestion, but maybe you guys could make a skype group, if you guys don't do that already. I guess it's a good thing to post in the dev thread the little updates, but I think a skype may be more convenient.
euphoriaflow said:
This is simply a suggestion, but maybe you guys could make a skype group, if you guys don't do that already. I guess it's a good thing to post in the dev thread the little updates, but I think a skype may be more convenient.
Click to expand...
Click to collapse
Between devs yes, we use Gtalk on a daily basis, and has been invaluable in getting work done quickly. It would be interesting to use skype and/or Gtalk for support, although we would need a dedicated account for that (and we are currently locked out of our Nova Gmail account, because we forgot the password ).
Not trolling here, but just wondering. Since when did discussion become development? Shouldn't this be in general?
In our one s forums all discussion threads are in the general section.
Sent from my HTC One S using Tapatalk 2
Same at the epic 4g touch forums, but to be honest, I don't mind it being here at all. Not too late to move this over there, though.
Sent from my SPH-D710 using xda app-developers app
hanthesolo said:
Between devs yes, we use Gtalk on a daily basis, and has been invaluable in getting work done quickly. It would be interesting to use skype and/or Gtalk for support, although we would need a dedicated account for that (and we are currently locked out of our Nova Gmail account, because we forgot the password ).
Click to expand...
Click to collapse
I do have the pass (I saved them in case we forget it). Also klin, it is considered for general but can be considered like dev too (in the sense of error reporting).
klin1344 said:
Not trolling here, but just wondering. Since when did discussion become development? Shouldn't this be in general?
In our one s forums all discussion threads are in the general section.
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
This is a subsection of our development thread, and while it may be better placed in general, it is best here, as we remove the chance of people who create accounts just to complain, and we obtain easier access for users. Plus, I believe I may have an idea to put the community to work, I just need to polish it a bit more.
hanthesolo said:
Between devs yes, we use Gtalk on a daily basis, and has been invaluable in getting work done quickly. It would be interesting to use skype and/or Gtalk for support, although we would need a dedicated account for that (and we are currently locked out of our Nova Gmail account, because we forgot the password ).
Click to expand...
Click to collapse
Can't you reset it. Should be easy if you put a recovery email
Sent From My YP-G1 running ICS build 3.5
is this version (3.5) already better than the GB Roms out there? or is it better for domeone like me who likes gaming and music to stay on my current rom until HW and such things are fixed?
btw im using dream Ultra right now because my device makes weird noises when im using other roms
crancpiti said:
is this version (3.5) already better than the GB Roms out there? or is it better for domeone like me who likes gaming and music to stay on my current rom until HW and such things are fixed?
btw im using dream Ultra right now because my device makes weird noises when im using other roms
Click to expand...
Click to collapse
I would hold off, but only for a little while longer, there are a few details (market download fix and proper sdcard support) that need to be added into the next ROM build so you don't have to ADB push things or use terminal to enter code after every boot, once those issues are fixed then it should be a good daily. But, if your comfortable and know how to ADB push files and stuff like that then go for it, just remember you WILL be charging it EVERY night due to the deep sleep bug inherited from the CM7 kernel that was used as the base for our CM9 kernel.
daniel644 said:
I would hold off, but only for a little while longer, there are a few details (market download fix and proper sdcard support) that need to be added into the next ROM build so you don't have to ADB push things or use terminal to enter code after every boot, once those issues are fixed then it should be a good daily. But, if your comfortable and know how to ADB push files and stuff like that then go for it, just remember you WILL be charging it EVERY night due to the deep sleep bug inherited from the CM7 kernel that was used as the base for our CM9 kernel.
Click to expand...
Click to collapse
Is it possible to fix that deep sleep bug?
My milestones that need to be crossed for daily usage would be:
H/W Acceleration
SD Card fixed (internal and external)
Deep Sleep
Everything else either has already been added/fixed (Voodoo!!! Beats removed and optional ) or I could wait for (bluetooth, camera, gps).
You guys are doing a great job though, can't wait for the next build to see how you guys are doing.
da1writer said:
Is it possible to fix that deep sleep bug?
My milestones that need to be crossed for daily usage would be:
H/W Acceleration
SD Card fixed (internal and external)
Deep Sleep
Everything else either has already been added/fixed (Voodoo!!! Beats removed and optional ) or I could wait for (bluetooth, camera, gps).
You guys are doing a great job though, can't wait for the next build to see how you guys are doing.
Click to expand...
Click to collapse
once oisis gets his sgp 4.0, he can port a 3.0.x kernal and all these will will be fixed.
da1writer said:
Is it possible to fix that deep sleep bug?
My milestones that need to be crossed for daily usage would be:
H/W Acceleration
SD Card fixed (internal and external)
Deep Sleep
Everything else either has already been added/fixed (Voodoo!!! Beats removed and optional ) or I could wait for (bluetooth, camera, gps).
You guys are doing a great job though, can't wait for the next build to see how you guys are doing.
Click to expand...
Click to collapse
if/when Oisis gets a 3.0.x kernel up and going (after he gets his player) hopefully the deep sleep bug will be no more, since its a carry over from the CM7 base kernel and if we have a new kernel that should solve that issue, and should get us to where bluetooth, camera and H/W acceleration could all be possible aswell.
Han, while we wait for Oisis to get his player and do his magic can we get one more build that has the fixed vold.fstab to have both internal and external memory working normally without having to ADB push files to the player and the market fix (if there's an easy way to do it)?
daniel644 said:
if/when Oisis gets a 3.0.x kernel up and going (after he gets his player) hopefully the deep sleep bug will be no more, since its a carry over from the CM7 base kernel and if we have a new kernel that should solve that issue, and should get us to where bluetooth, camera and H/W acceleration could all be possible aswell.
Han, while we wait for Oisis to get his player and do his magic can we get one more build that has the fixed vold.fstab to have both internal and external memory working normally without having to ADB push files to the player and the market fix (if there's an easy way to do it)?
Click to expand...
Click to collapse
A build with a fixed vold.fstab is possible but for the market fix, this is something related to the initrd that actually needs one more line of code for it to be activated lool.
goldflame09 said:
once oisis gets his sgp 4.0, he can port a 3.0.x kernal and all these will will be fixed.
Click to expand...
Click to collapse
Hold up a sec, I'm unsure of the situation a bit here... does oisis HAVE a Samsung Galaxy 4.0?
If not, I'm willing to toss a couple Tens his way (won't mention how much here) with a stipulation. I'm talking about Amazon Credit (which I have alot of) here... An Amazon gift card (via email) would have to be used as Amazon being the purchase website. PM me if there is an interest oisis if this is the case of you not having an actual SGP 4.0 ...
Edit: Ok, I just read that oisis actually did order one from China (?) but if it takes too long I'm still willing to help money wise if needed for any of these great 4.0 devs here developing the ICS rom
zaclimon said:
A build with a fixed vold.fstab is possible but for the market fix, this is something related to the initrd that actually needs one more line of code for it to be activated lool.
Click to expand...
Click to collapse
OK then, a build with fixed vold.fstab and a file browser like the free ES File explorer so I can sideload my apps.
daniel644 said:
OK then, a build with fixed vold.fstab and a file browser like the free ES File explorer so I can sideload my apps.
Click to expand...
Click to collapse
A file explorer? I think I will just fix the kernel so that the drmserver can work on boot. As for the vold.fstab, I cleaned all my repo so it will take a long time before I can get one, I will get it more presumably on the weekend.
zaclimon said:
A file explorer? I think I will just fix the kernel so that the drmserver can work on boot. As for the vold.fstab, I cleaned all my repo so it will take a long time before I can get one, I will get it more presumably on the weekend.
Click to expand...
Click to collapse
Yeah a file explorer (file browser) so I can access the LEGALLY obtained .apk's I've collected from the developers websites, to install them. for whatever reason there is NO file browser app in this CM9.
[DEV][APP]★Andromizer★ Android Universal Tools.(Settings,Tweaks,Tools,TWRP,etc.)
Threads has integrated. Please, visit for below link.
http://forum.xda-developers.com/showthread.php?p=44063945
Thanks.
removed.
Re: [DEV][APP][Andromizer] Android Customizing Tools (Note2 Specific Features Added)
Just bought this app
Please forgive my ignorance in this matter. Im sure youve worked very hard on this. Im just not entirely sure if it works at the moment
Re: [DEV][APP][Andromizer] Android Customizing Tools (Note2 Specific Features Added)
littleguevara said:
Just bought this app
Please forgive my ignorance in this matter. Im sure youve worked very hard on this. Im just not entirely sure if it works at the moment
Click to expand...
Click to collapse
i don't care.
Just, let's enjoy the Android.
Sent from my GalaxyNote2
J.Y.Daddy said:
i don't care.
Just, let's enjoy the Android.
Sent from my GalaxyNote2
Click to expand...
Click to collapse
I don't understand, are you saying you don't care that it doesn't seem to work or you don't care about his donation? Either way its a little disturbing. Perhaps we have a language barrier here??
Upgrade Information
[Andromizer Upgrade Ver 3.8.0]
[1]One-Touch Kernel Tweak (Pro)
CPU Scaling/Governor
CPU Suspend Scaling
I/O Scheduler
Front Buffer Early Suspend Delay
CPU Idle Mode
Multicore Power Saving
GENTLE_FAIRE_SLEEPERS
Dynamic FSync
Intelli-Plug
Touch Wake Control
Fast Charge Control
SD card read ahead buffer size
Etc...
[2]CPU Voltage Control (Pro)
Available in supported kernels.
[3]Battery Charge Control (Pro)
Available in supported kernels.
[4]Galaxy Note-1 supported
SHV-E160S, SHV-E160K, SHV-E160L
IMEI(efs) Backup/Restore
Kernel Updater
Recovery Updater
[5]One-Touch Optimizing features are little improved.
[6]Apps Backup/Restore features are little improved.
[7]Free version new supported
I/O Scheduler setting, ROM Cleaner, 3G/4G Tweak feature
Upgrade Information
[Andromizer Upgrade Ver 4.0.0]
* All New Andromizer *
From now on, supported for Android 3.x.x ~ 4.x.x.
[1] Screen improved for UI,icon,etc. Swipe(flip) is now possible.
[2] Governor Control features added.
[3] One-Touch Kernel Tweaks features improved.
[4] TWRP Manager
for using TWRP recovery devices.
One-Touch TWRP Backup.
One-Touch TWRP Restore.
One-Touch TWRP Wipe.
One-Touch TWRP Installer.
Questions
I want to try this app, but to make sure this is the app I need.
I wanted to ask a few questions.
1. What kind of tweaks are part of 3G/4G
2. From description of this app, does some of the tools change buildprop file settings?
3. Does this app play nice with ROMS running 4.1.2/I'm currently using Jelly Beans Build 19?
GrandMasterB said:
I don't understand, are you saying you don't care that it doesn't seem to work or you don't care about his donation? Either way its a little disturbing. Perhaps we have a language barrier here??
Click to expand...
Click to collapse
I find it very disturbing that the dev doesn't respond to anything people say and if he/she does it is very short and unhelpful.
Edit:
Another thing that bothers me is this app is almost exactly, there are only a few *minor* differences, the same as PimpMyRom. Its almost like the dev copied all of someone else's work and is charging for it.
Sent from my SCH-I605 using XDA Premium HD app
shangrila500 said:
I find it very disturbing that the dev doesn't respond to anything people say and if he/she does it is very short and unhelpful.
Edit:
Another thing that bothers me is this app is almost exactly, there are only a few *minor* differences, the same as PimpMyRom. Its almost like the dev copied all of someone else's work and is charging for it.
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
Sorry for my short English. That's reason.
br3tt0n said:
I want to try this app, but to make sure this is the app I need.
I wanted to ask a few questions.
1. What kind of tweaks are part of 3G/4G
2. From description of this app, does some of the tools change buildprop file settings?
3. Does this app play nice with ROMS running 4.1.2/I'm currently using Jelly Beans Build 19?
Click to expand...
Click to collapse
1. 3g/4g network more speed up tweaks.(The range of questions is too large.)
2. build.prop file to change the value of the LCD-Density only. The others settings are not changed build.prop.
3. works on all Android version.
Also, this app's development has been ongoing for two years.
sorry for answer delayed.
Threads has integrated. Please, visit for below link.
http://forum.xda-developers.com/showthread.php?p=44063945
Thanks.
hi its aonly something small but my phone just started doing it
im trying to take screen shots to help with bug squashing
it was fine but now when i press the volume controls together i get a volume control at the top of the page with the screen shot
is there a way of disabling the volume showing up or am i pressing the wrong buttons!
see attached
thank you for help i can help get some more bugs squashed when ive fixed this
That's a known problem but it has just been fixed in the latest vivid-proposed images. The fix has also been in the RTM images for a while.
Sent from my awesome Ubuntu Touch device using the Forum Browser app
im running 14.10 r16
is this the best version to run you think?
i dont get facebook notifications aswell is this fixed on other versions ...
wayneward said:
im running 14.10 r16
is this the best version to run you think?
i dont get facebook notifications aswell is this fixed on other versions ...
Click to expand...
Click to collapse
Yes, it's definitely the best version to run if you want to use it as a daily driver. You should get an update about next week which fixes the screenshot issue.
Regarding the notifications: Yes, there's a real problem with that.
Actually, I submitted patches for that issue some time ago, but nobody has been reviewing them for more than two months. I've almost lost hope that this will ever happen...
If you want to increase the problem's importance, please select that the following 4 bugs affect you:
https://bugs.launchpad.net/ubuntu/+source/account-polld/+bug/1405645
https://bugs.launchpad.net/ubuntu/+source/account-polld/+bug/1405646
https://bugs.launchpad.net/ubuntu/+source/account-polld/+bug/1405649 (Leaving a comment here stating how annoying you find the bug would definitely help as well!)
https://bugs.launchpad.net/ubuntu/+source/account-polld/+bug/1405651
You can use the Ubuntu One account from your phone to log in.
Maybe that creates some pressure so that the patches will eventually be merged.
thats great what will the update come down as a update to the system?
nikwen said:
Yes, it's definitely the best version to run if you want to use it as a daily driver. You should get an update about next week which fixes the screenshot issue.
Regarding the notifications: Yes, there's a real problem with that.
Actually, I submitted patches for that issue some time ago, but nobody has been reviewing them for more than two months. I've almost lost hope that this will ever happen...
If you want to increase the problem's importance, please select that the following 4 bugs affect you:
https://bugs.launchpad.net/ubuntu/+source/account-polld/+bug/1405645
https://bugs.launchpad.net/ubuntu/+source/account-polld/+bug/1405646
https://bugs.launchpad.net/ubuntu/+source/account-polld/+bug/1405649 (Leaving a comment here stating how annoying you find the bug would definitely help as well!)
https://bugs.launchpad.net/ubuntu/+source/account-polld/+bug/1405651
You can use the Ubuntu One account from your phone to log in.
Maybe that creates some pressure so that the patches will eventually be merged.
Click to expand...
Click to collapse
@wayneward Yes, it will be an OTA update. You'll receive a notification once it's available.
Sent from my awesome Ubuntu Touch device using the Forum Browser app
Now we have 14.10 r21 great improvement from r20, and screenshot works fine (vol+ and vol -)
Working a treat
Sent from my awesome Ubuntu Touch device using the Forum Browser app
Nice! I just flashed UT on my N4 two days ago and everything online says screenshot isn't functional yet. Glad I found this.
Sent from Ubuntu Touch via Forum