Hi!
Frnds, I jst wanted to know that how can I root and unroot my Samsung Galaxy Star Pro gts 7262 without using a computer.
I need ur hlp.
Thank you.
Dude just found this new exploit that works like miracle on my S7262XXUAND5 firmware.
U will need odin latest version 3.09
recovery image(recovery.tar.md5)
Supersu apk
In this method u edit your build.prop to patch kernel due to which white screen issue is occuring.
1. Put Supersu apk in extsdcard of ur phone
2. Boot in download(odin) mode by pressing power+vol. down+home and leave power button when samsung logo appears after that press vol. up to enter dwnld mode.
3. Connect your phone to pc via usb and open odin.. it will show added when successfully connected.
4. flash recovery file by clicking on pda and selecting recovery.tar. md5 file.
5. Press start and wait ur phone will restart and wait until pass appears on odin.
6.Shut down phone again then press Vol. up+Home+Power button leave power button when logo appears.
7. Now As kernel is not yet patched the recovery will open but white screen will appears to u but it is actually cwm recovery up and running in background
8. Now as u cant see cwm u have to write these instruction on a page which I am about to tell or save them
Press vol. down button one time
Then power button
Now u have entered in install zip from sd card menu
Now again press power button now u have to choose zip from sd card u
press volume down 2 times and then press power button
Now u have selected supersu..zip
Now press 5 times vol. down and then power button
Cwm recovery will flash the zip
Wait for a minute or so and u will have installed supersu app.
9. The hard part is over now take battery out then put back in and start phone normally.
10.When phone is booting it will display android is upgrading message at boot it means phone is rooted and su binary is installed
11. Now phone is rooted. Install root explorer and open system/build.prop
13 Remember to mount it as R/W and grant superuser access.
12. to open build.prop long press on it and choose open with Text Editor.
13. now change ro.product.model to Galaxy S4
14. ro.product.brand and ro. product.manufacturer to Samsung with Capital S it would be small then save changes and restart phone.
15. Voila kernel is patched permanently ...
16.Enjoy.
Sent from my Galaxy S4 using XDA Premium 4 mobile app
Sent from my Galaxy S4 using XDA Premium 4 mobile app
What if there will be multiple file on ext card how would we know we have selected the correct zip file to install
Related
Hi So I am stuck in download mode when I tried to root my Fascinate with odin today it got a fail 1 success 0. I have tried holding down the power button for 10 seconds and a battery pull to no avail. Help would be greatly appreciated.
I would suggest that you get a .pit and re partition while you are going back to stock.
Omniscient S said:
I would suggest that you get a .pit and re partition while you are going back to stock.
Click to expand...
Click to collapse
Thank you for responding but I have not rooted yet the problem occurred when I was trying to root.
are you following the [GUIDE] from droidstyle?? Section 6
Section 6: How to root stock froyo or gingerbread(This is not needed if your flashing a custom rom)
Downloads these files to PC,
Samsung drivers-
Odin (computer program)-
CWMALL 2.5 (place this file somewhere on your computer where you can easily locate it)-
"su-2.3.6.1.x.zip" file (place this file on the root of your sdcard...not within any folders)-
Modified stock Froyo kernel (place this file somewhere on your computer where you can easily locate it). This file is only necessary if you're rooting Froyo. It's not necessary for Gingerbread-
Instructions:
1. Install Samsung drivers on your computer.
2. Open Odin on your computer. (You may need to disable antivirus programs on your computer and/or phone for this to work properly.)
3. Power off your phone and remove the battery.
4. Plug the stock USB cord that came with your phone into a powered USB port on your computer (usually on the back of the computer).
5. Press and hold the "volume down" button on your phone, and continue to hold it while plugging the USB cord into your phone. This will put your phone into download mode. You'll see a large yellow triangle on the screen of your phone. (Let go of the volume button at this point.) You will also see one of the small boxes in Odin turn yellow, as well as "Added" appearing in the message box.
6. Click the PDA button in Odin (NOT the PHONE button) and navigate to the "CWM2.5_Voodoo.tar.md5" file you downloaded earlier. This file does not include a voodoo kernel and will not perform the voodoo lagfix conversion. It's only named as such to note that it is compatible with voodoo kernels.(make sure auto reboot is unchecked, although it should be by default)
7. Click START. When this process has finished, you'll be notified in Odin (succeeded 1 / failed 0) and your phone's screen will go blank.
*** Step 8 is only for rooting Froyo. If you're rooting Gingerbread, skip Step 8 and proceed to Step 9. ***
8. Unplug your phone and click RESET in Odin. Repeat Step 5 to get the phone back into download mode and recognized by Odin. Using the PDA button, navigate to the "stock_kernel.tar.md5" file you downloaded earlier, select it, and press START. You'll again be notified in Odin once this process has completed (succeeded 1 / failed 0).
9. Unplug your phone and re-insert the battery.
10. Press and hold BOTH volume buttons. While holding them, press the power button. Hold all three simultaneously until you see "SAMSUNG" appear TWICE. This will boot your phone into CWM 2.5 red recovery. If your phone boots up normally here and not into recovery, just wait for it to boot up and then power it down and try again. It may take a couple tries for you to get it right.
11. Using the volume rocker, navigate down to "Install zip from sdcard." Highlight it and press the power button to select.
12. Navigate to "choose zip from sdcard" and select with the power button.
13. Navigate to the "su-2.3.6.1.x.zip" file that you downloaded earlier and select it. Scroll to "Yes," and use power button to select.
14. When you're advised of completion, press the MENU softkey to go back to the previous CWM Recovery screen, then highlight and select "reboot system now."
*Thanks to Bhfd64 @ galaxy forums for this write up!!
.
I have a Samsung galaxy ace 2 x
Network Virgin
ics 4.0.4
GT-S7560M
Sent from my GT-S7560M using xda app-developers app
KyleAustin said:
I have a Samsung galaxy ace 2 x
Network Virgin
ics 4.0.4
GT-S7560M
Sent from my GT-S7560M using xda app-developers app
Click to expand...
Click to collapse
note- i do not take credit of making the toolkit
first download the gt-s7560m root toolkit - http://bit.ly/13K9Ute
1. Copy “CWM-Superuser-3.1.3” to your sd card.
2. Take the back cover off of your phone.
3. Place your phone in download mode by turning it off and pressing “Power + Home + vol down” briefly for a second. Your phone should boot to a menu asking you to choose. Press “vol up” button to choose recovery mode,
4. Start odin you should see the box with the com port yellow showing it found your phone
5. Make sure only the following 3 boxes are check marked “f. Reset time” “Auto reboot” and “PDA” Load the recovery.tar file in the PDA section.
6. Hit start, when odin finishes your phone will vibrate. When your phone starts to vibrates pull the battery!
7. Now you can put your phone back together. I could not figure out how to enter recovery mode using the buttons so I did it using adb “adb reboot recovery”
8. You should now be in recovery mode. Use the hardware buttons to navigate vol up and down to scroll. Home button to select and power button to go back.
9. Select install zip from sd card, choose zip from sd card. Choose “CWM-Superuser-3.1.3.zip”
Once it’s done hit the power to go back and select reboot phone. You should have full root and custom recovery installed.
Thanks for the help
Sent from my GT-S7560M using xda app-developers app
TechMasta said:
note- i do not take credit of making the toolkit
first download the gt-s7560m root toolkit - http://bit.ly/13K9Ute
1. Copy “CWM-Superuser-3.1.3” to your sd card.
2. Take the back cover off of your phone.
3. Place your phone in download mode by turning it off and pressing “Power + Home + vol down” briefly for a second. Your phone should boot to a menu asking you to choose. Press “vol up” button to choose recovery mode,
4. Start odin you should see the box with the com port yellow showing it found your phone
5. Make sure only the following 3 boxes are check marked “f. Reset time” “Auto reboot” and “PDA” Load the recovery.tar file in the PDA section.
6. Hit start, when odin finishes your phone will vibrate. When your phone starts to vibrates pull the battery!
7. Now you can put your phone back together. I could not figure out how to enter recovery mode using the buttons so I did it using adb “adb reboot recovery”
8. You should now be in recovery mode. Use the hardware buttons to navigate vol up and down to scroll. Home button to select and power button to go back.
9. Select install zip from sd card, choose zip from sd card. Choose “CWM-Superuser-3.1.3.zip”
Once it’s done hit the power to go back and select reboot phone. You should have full root and custom recovery installed.
Click to expand...
Click to collapse
this link is not working getting a 404 error code
first download the gt-s7560m root toolkit - http://bit.ly/13K9Ute
Nvm got it working thanks anywas
Sent from my GT-S7560M using xda premium
Hi guys,
I just used Download Mode + Odin to push T110.CWM.v6.0.4.8.tar.md5 to my T110 Tablet.
After that I could boot into CWM-based Recovery v6.0.4.8 without issues.
Then I installed the zip file android-armeabi-universal-root-signed.zip
After that I rebooted. And since then I was not able to boot into Android or even Download Mode.
Only Recovery Mode works.
Then I tried to run adb devices from Windows and it reports my device ID number + recovery.
Now I was hoping somebody could help me with some adb commands to get this thing working again.
My initial goal was to root and upgrade from 4.1.2 to 4.2.2.
I would prefer using this lite rom T110UEUANE4.LiteV2.Rooted.Deodexed.June2014.zip instead of the official rom T110XXUANG2_T110OXAANG2_XEO.zip.
But at this point I would not care to much, I just hope it can be fixed again
Many thanks for your help!
How to unbrick your Samsung Galaxy Tab 3 Lite SM-T 110
Things to download:
stock kitkat rom: sammobile.com/firmwares/download/32777/T110XXUANG2_T110OXAANG2_XEO/
Odin: androidhost.org/get/PVAIv
Installation instructions:
1. Extract both zips onto your desktop.
2. Start the odin application.
3. Turn off tablet, and hold -volume button, the home button, and the power button at the same time.
4. Release power button once the tablet turns on but hold the home an the -volume button down.
5. Once transferred to new screen accept warning by pressing the +volume button.
6. Connect your tablet to your computer and wait for Odin to recognize your device.
7. Once recognized, click AP and navigate to the extracted kitkat stock rom MD5 file.
8. Wait about 5 minutes for Odin to check the file.
9. Once odin checks the file make sure to only have Restart and f. reset time checked in the options.
10-1. Click start and wait for installation. to complete.
10-2. If you cannot get to the start button, press tab until you are at the start button and press enter. Start button is at the bottom left.
11. Tablet will restart automatically and you are done.
Quick note: you just learned how to recover from a soft brick.
Hello guys, today i get my friend's old Samsung galaxy ace duos SCH-i589..& this is my first samsung device to be looking for development in xda (i personally avoiding samsung). I thought that all samsung devices have good xda support but from my searching on google shows that it has almost nil support.. I even can't find proper forum for installing cwm in this device..Now i think what i found from diverse locations should be put in one place.
NOTE: I am not a developer nor below is my work..i would like to all those members who made it possible.
Running from stock rom, i can root this device from the below files:
update.zip
root Instruction:
1. Download & copy the below attached "update.zip" to the root of your sdcard.
2. Turn off your phone.
3. Press & hold (Power + Volume down + Home) keys & release when the phone starts in recovery mode.
4. In recovery mode, the screen select "select update.zip from sdcard".
Remember in recovery touchscreen will not work use volume up down & home keys.
5. Select "update.zip".
6. Yes
7. Done
now to unroot this device after rooting:
unroot.zip
unroot Instructions:
1. Uninstall all [Root] apps.
2. Download "unroot.zip"
3. Turn off your phone.
4. Press & hold (Power + Volume down + Home) keys & release when the phone starts in recovery mode.
5. In recovery mode, the screen select "select update.zip from sdcard".
Remember in recovery touchscreen will not work use volume up down & home keys.
6. Select "unroot.zip".
7. Yes
8. Done.
Caution : Both files are related to each other, If rooted with "update.zip" from here then only use "unroot.zip"
Clockwork mod recovery
Now temporary cwm which can do any cwm task but u have to load it everytime.
CWM-6102.zip
cwm instruction
1. Download & copy the below attached "CWM-6102.zip" to the root of your sdcard.
2. Turn off your phone.
3. Press & hold (Power + Volume down + Home) keys & release when the phone starts in recovery mode.
4. In recovery mode, the screen select "select CWM-6102.zip from sdcard".
Remember in recovery touchscreen will not work use volume up down & home keys.
5. Select "CWM-6102.zip".
6. Yes
7. Done
8. This has to be done every time you want to load cwm recovery.
Now i haven't tested beyond that but i found a youtube link for flashing stock rom via odin
https://www.youtube.com/watch?v=4ChtmNtpk3c
but this is in spanish so i translated in english here..
You must install Samsung KIES to ensure that your PC detects your phone.
After downloading install Odin
1 - Restart the phone in Download Mode ( Vol down , Home, Power Simultaneously ) .
press volume up to continue ( or vol down to leave but it can damage... )
2- Start Odin
3 - select files and press Start
Watch Out !!! Never unplug your phone before restarting
After 5-10 minutes your phone will reboot to your new ROM
stock rom download below:
link:http://www.mediafire.com/download/z7t1yz9c615ebj1/rom+sch-i589.zip
Thank you very much! Although my SCH-i589 is currently hard brick, I think it will be very useful! -- Greetings from new members after 8 years
We know cwm is a great recovery for any android device
and for star pro there is no official cwm recovery
few days ago I got this from a youtube video and yes it's working
Download from here
Make sure you are root user :highfive::victory:
How to install this ?
Follow below steps
1. Install samsung driver in your PC
2. Open Odin
3. Hit PDA and select downloaded file
4. Turn off your mobile
5. Press Vol down + Home + Power button
6. Stop pressing when you see the screen turn on
7. Press vol up button
8.In odin unchecked Auto reboot
9. Now click start
10. After seen the reset or pass in Odin Unpluged your mobile
11. Turn it off
12. Now press Vol up+ Home + Power
Now enjoy CWM Touch recovery
Features
1. No white screen problem
2. Touch cwm recovery
3. No chance of breaking
4. Now install zip file
ETC. ETC.
Video guide
If you have any problem please tell me and if you have XDA account please hit the Thanks button :good::fingers-crossed:
Its not open recovery its White screen
od custom ROM for the phone ?? Is there a phone ??