Related
Hello. I need help. Im on stock GB 4.0.2.a.0.62, stock kernel and rooted. I installed cwm using the playstore cwm(xpack?). It says the cwm is not permanent though.
I was trying to install the "HASA GB v6 beta all" using the cwm(i total wipe first), but forgot to flash the kernel first(rage kernel?), and now it wont boot.
I cant enter the cwm i guess because the cwm is not permanent.
I tried flashing official firmware back using flashtool but hang at "Reading device information"
I tried flashing the unbrickingxperia2011 ftf and flashing the firmware again but it still hang at the reading device.
Btw, my device can enter flashmode(green led) n fastboot(blue led).
Help please! Thanks a lot
Sent from somewhere
Is your bootloader unlocked? If yes, just flash the kernel in fastboot mode and then you should be able to boot in cwm
You don't need to install cwm using xparts, all kernels have cwm included, so just flash a kernel you like and you have cwm :good:
mihahn said:
Is your bootloader unlocked? If yes, just flash the kernel in fastboot mode and then you should be able to boot in cwm
You don't need to install cwm using xparts, all kernels have cwm included, so just flash a kernel you like and you have cwm :good:
Click to expand...
Click to collapse
My bootloader is locked
I have my nandroid backup though. Can i flash my nandroid using the flashtool somehow?
Sent from my Nexus 4
kruzae said:
My bootloader is locked
I have my nandroid backup though. Can i flash my nandroid using the flashtool somehow?
Sent from my Nexus 4
Click to expand...
Click to collapse
No, you need to do try it again like that:
1. Go to flashtool installation folder -> drivers: install all drivers for all devices/modes
2. Launch flashtool
3. Click the flash -> flashmode
4. Select the .ftf, don't exclude anything, but tick "no final verification"
5. When the poup appears, take your phone, and take out the battery
6. After 10 seconds, reinsert the battery and hold volume down. While holding volume down connect the phone to your pc
7. Now the flashing should start and we can hope it'll work!
8. Boot up the phone, root it, install cwm, restore the backup!
On a locked bootloader, you can't flash a kernel. You need to choose a rom for locked bootloader and follow all instructions like given there :good:
mihahn said:
No, you need to do try it again like that:
1. Go to flashtool installation folder -> drivers: install all drivers for all devices/modes
2. Launch flashtool
3. Click the flash -> flashmode
4. Select the .ftf, don't exclude anything, but tick "no final verification"
5. When the poup appears, take your phone, and take out the battery
6. After 10 seconds, reinsert the battery and hold volume down. While holding volume down connect the phone to your pc
7. Now the flashing should start and we can hope it'll work!
8. Boot up the phone, root it, install cwm, restore the backup!
On a locked bootloader, you can't flash a kernel. You need to choose a rom for locked bootloader and follow all instructions like given there :good:
Click to expand...
Click to collapse
Lol it worked! Thanks a lot ! This is actually my friend's phone im flashing. I come from s3 and nexus 4, and usually their roms already come with their kernel. Never thought i have to flash it separately. Thanks again!
Sent from my Nexus 4
kruzae said:
Hello. I need help. Im on stock GB 4.0.2.a.0.62, stock kernel and rooted. I installed cwm using the playstore cwm(xpack?). It says the cwm is not permanent though.
I was trying to install the "HASA GB v6 beta all" using the cwm(i total wipe first), but forgot to flash the kernel first(rage kernel?), and now it wont boot.
I cant enter the cwm i guess because the cwm is not permanent.
I tried flashing official firmware back using flashtool but hang at "Reading device information"
I tried flashing the unbrickingxperia2011 ftf and flashing the firmware again but it still hang at the reading device.
Btw, my device can enter flashmode(green led) n fastboot(blue led).
Help please! Thanks a lot
Sent from somewhere
Click to expand...
Click to collapse
try flashing the official ftf by flastool it should work. hit thanks if i helped
Not Able to Flash Stock FTF
Hello,
My LWW got bricked while flashing a custom kernel nAs's 3.4. I was in 4.1 JB custom rom. After flashing the kernel my phone wont start. When I pressed the power button it just vibrate and nothing happened after that. I tried to flash the stock ICS and also GB firmware from sony's website however when I tried to flash those firmwares via flashtool. I am getting error that "flashtool cannot read after opening the phone" and flashing is aborted.
I have unlocked bootloader.
Please help.......:crying:
j_a_y_82 said:
Hello,
My LWW got bricked while flashing a custom kernel nAs's 3.4. I was in 4.1 JB custom rom. After flashing the kernel my phone wont start. When I pressed the power button it just vibrate and nothing happened after that. I tried to flash the stock ICS and also GB firmware from sony's website however when I tried to flash those firmwares via flashtool. I am getting error that "flashtool cannot read after opening the phone" and flashing is aborted.
I have unlocked bootloader.
Please help.......:crying:
Click to expand...
Click to collapse
Repair with Sony Companion does not work?
I'll Try
kirev said:
Repair with Sony Companion does not work?
Click to expand...
Click to collapse
I'll try to do that and post the result here....
Thanx
Relock boot loader if needed
j_a_y_82 said:
Hello,
My LWW got bricked while flashing a custom kernel nAs's 3.4. I was in 4.1 JB custom rom. After flashing the kernel my phone wont start. When I pressed the power button it just vibrate and nothing happened after that. I tried to flash the stock ICS and also GB firmware from sony's website however when I tried to flash those firmwares via flashtool. I am getting error that "flashtool cannot read after opening the phone" and flashing is aborted.
I have unlocked bootloader.
Please help.......:crying:
Click to expand...
Click to collapse
First of all you don't need to try PC Companion as it won't work on an unlocked bootloader!
Have you tried flashing another kernel in fastboot mode?
kirev said:
Relock boot loader if needed
Click to expand...
Click to collapse
No, better don't advise to lock the phone again when it's bricked. That isn't a good idea!
Sent from my Nexus 4 running Android 4.4
It Worked
mihahn said:
First of all you don't need to try PC Companion as it won't work on an unlocked bootloader!
Have you tried flashing another kernel in fastboot mode?
No, better don't advise to lock the phone again when it's bricked. That isn't a good idea!
Sent from my Nexus 4 running Android 4.4
Click to expand...
Click to collapse
The Sony PC Companion trick worked. My phone is working fine now. Only thing is it is now in GB 2.3.4 and bootloader is also locked. I have to start again from scratch and root my device to update it to JB
Thanks everyone for solutions.....:victory::laugh::laugh:
j_a_y_82 said:
The Sony PC Companion trick worked. My phone is working fine now. Only thing is it is now in GB 2.3.4 and bootloader is also locked. I have to start again from scratch and root my device to update it to JB
Thanks everyone for solutions.....:victory::laugh::laugh:
Click to expand...
Click to collapse
That's strange as PC Companion doesn't work on an unlocked bootloader normally. Did you lock it again or did it just work like that?
Sent from my Nexus 4 running Android 4.4
Just Worked
mihahn said:
That's strange as PC Companion doesn't work on an unlocked bootloader normally. Did you lock it again or did it just work like that?
Sent from my Nexus 4 running Android 4.4
Click to expand...
Click to collapse
No I did not do any thing, it just worked like that.
j_a_y_82 said:
No I did not do any thing, it just worked like that.
Click to expand...
Click to collapse
Same with me once on testpoint unlocked bootloader.
kirev said:
Same with me once on testpoint unlocked bootloader.
Click to expand...
Click to collapse
j_a_y_82 said:
No I did not do any thing, it just worked like that.
Click to expand...
Click to collapse
Maybe that's possible because you used the testpoint method! Really interesting
Sent from my Nexus 4 running Android 4.4
How to restore the A2017U Axon 7 to functional stock B20 ( System,Wifi,ETC ) with TWRP and locked bootloader
1) Download rczrider's TWRP System backup
2) Extract the A2017UV1.0.0B20 folder on the desktop.
3) Copy the content of the A2017UV1.0.0B20 folder in /sdcard/TWRP/BACKUPS/DEVICE_SERIAL_CODE_HERE/Stock
4) Download tenfar's B20 root kit and extract it on the desktop
5) Turn OFF the phone.
6) Hold both volume buttons and plug the USB cable in the phone. The screen should stay black when the cable is plugged in. (Make sure to have the Qualcomm 9008 drivers installed).
7) Open CMD in tenfar's B20 root kit folder and type: axon7root.exe -p (com port) (See tenfar's thread for help).
8) Once the boot.img and recovery.img are both installed successfully, hold volume up + power to restart the phone. You should arrive in TWRP.
9) Click on Restore->(Folder where the recovery is).
10) Make sure the System partition is checked and Swipe to restore.
11) Wipe Cache/Dalvik and then restart the phone. It should boot fine in Android.
12) BE PATIENT COMPLETE BOOT WILL TAKE SEVERAL MINUTES
NOTE : Step 3 - TWRP uses your device serial number to create /restore your backup , if you are not sure what it is just do a simple TWRP (Cache for sample) it will show now
Thanks to @DrakenFX, @tenfar, @rczrider and anyone else involved in this!
Wow thanks and the fixes are pouring in!
Sent from my SM-N930V using Tapatalk
But is no modem backup in this files?
Отправлено с моего HTC One M8 через Tapatalk
raber111 said:
But is no modem backup in this files?
Отправлено с моего HTC One M8 через Tapatalk
Click to expand...
Click to collapse
You shouldn't need it anyways, no modem file currently exist.
But after restoring my phone don't have any radio. No modem exist. No sim no Wi-Fi no Bluetooth
Отправлено с моего HTC One M8 через Tapatalk
raber111 said:
But after restoring my phone don't have any radio. No modem exist. No sim no Wi-Fi no Bluetooth
Отправлено с моего HTC One M8 через Tapatalk
Click to expand...
Click to collapse
Which Axon 7 you have??
1. A2017
2. A2017U
3. A2017G
raber111 said:
But after restoring my phone don't have any radio. No modem exist. No sim no Wi-Fi no Bluetooth
Click to expand...
Click to collapse
Not that I know of The only problem I had was that I had no WiFi (bluetooth and NFC still worked) and I fixed it by flashing the right boot.img file.
2017U. And I don't have Imei now...
Отправлено с моего HTC One M8 через Tapatalk
https://idlekernel.com/flash-tools/firmware/ailsa_ii_A2017U/B20/
here we have modem.bin file but i can't flash it over fastboot and i don't know how to make flashable zip for it ...
TWRP
So I have twrp installed already, should i just restore the folder?What do I do with the stock imgs?
Edit: Yes you do need to (without it wont pass ZTE Screen)
TDLR: When you go to wipe cashe. . .dont factory reset. Its a pain in the ass to fix.
I've pulled aboot, bluetooth, fbop, and modem. They can be found via the same link in my "untouched B20" page: http://forum.xda-developers.com/axon-7/development/untouched-b20-boot-recovery-files-t3443818
Hello many thanks for your post.
All content inside the zip file (forum.xda-developers.com/axon...files-t3443818 ), has to be extract into /sdcard/TWRP/BACKUPS/DEVICE_SERIAL_CODE_HERE/Stock?
edimorgado said:
Hello many thanks for your post.
All content inside the zip file (forum.xda-developers.com/axon...files-t3443818 ), has to be extract into /sdcard/TWRP/BACKUPS/DEVICE_SERIAL_CODE_HERE/Stock?
Click to expand...
Click to collapse
Yes. If you want you could just do a small backup in TWRP of the boot and it will create the right structure for you, after that you just have to drag the files in the right folder.
ZTE Axon 7, a2017U need support not able to get network, wifi, bluetooth!
Hello,
I have ZTE Axon 7, a2017U. I followed the instructions in this post.
After installing, my phone is not able to get network, wifi etc. The Baseband version is Unknown.
What should I do to install the radio (network, wifi, modem and bluetooth)?
kindly assist to solve the issue.
Many thanks for all support...
edimorgado said:
Hello,
I have ZTE Axon 7, a2017U. I followed the instructions in this post.
After installing, my phone is not able to get network, wifi etc. The Baseband version is Unknown.
What should I do to install the radio (network, wifi, modem and bluetooth)?
kindly assist to solve the issue.
Many thanks for all support...
Click to expand...
Click to collapse
I have same problem and I don't know what to do. When I tried to flash modem via fastboot i get error message. I can't find nviram files on phone . If you will find solution to fix that let us know. I think maybe stock image can help but for now isn't released yet.
Отправлено с моего HTC One M8 через Tapatalk
raber111 said:
I have same problem and I don't know what to do. When I tried to flash modem via fastboot i get error message. I can't find nviram files on phone . If you will find solution to fix that let us know. I think maybe stock image can help but for now isn't released yet.
Отправлено с моего HTC One M8 через Tapatalk
Click to expand...
Click to collapse
Where is the flashable modem file, please?
XblackdemonX said:
Not that I know of The only problem I had was that I had no WiFi (bluetooth and NFC still worked) and I fixed it by flashing the right boot.img file.
Click to expand...
Click to collapse
How did you flash the boot.img? (through twrp, fastboot, etc). I'm having the same problem as well; my Wifi doesn't work after this process.
Pollito788 said:
How did you flash the boot.img? (through twrp, fastboot, etc). I'm having the same problem as well; my Wifi doesn't work after this process.
Click to expand...
Click to collapse
normally you'd use "fastboot flash boot boot.img" from bootloader mode.
I need to return phone. Does anyone have the stock US bootloader? The one I have called stock shows as A2017UV1.0.0B20_boot, but the Build Time is in Chinese and I don't recall this being the case when I got the phone.
Thanks
Following this guide, I was finally able to get my phone to boot again (not even sure what I did wrong in the first place, following a well-known guide).
However, I have no radio/modem functions.... no cell connectivity, no wifi, bluetooth, etc. I've tried flashing rczrider's untouched modem backup, but I get an error about flashing a critical partition not being allowed. Here is the error. Can anyone help?
Code:
c:\Users\chris\Desktop\Chris Phone\Axon>fastboot flash radio modem.bin
target reported max download size of 536870912 bytes
sending 'radio' (97280 KB)...
OKAY [ 2.148s]
writing 'radio'...
FAILED (remote: Critical partition flashing is not allowed)
finished. total time: 2.170s
**EDIT**
I flashed tenfar's original modified boot (the one that is now crossed out) just for giggles, and now my phone boots AND has wifi.
http://forum.xda-developers.com/axon-7/development/wip-axon-7-root-bootloader-unlokced-t3441204
Hello,
I'm new to all this so forgive me my noobish questions. I've allready searched the internet for tutorials and how-to's but nothing seems to work.
Can someone help me on how to unlock the bootloader?
I would like to install a custom rom but need to root the phone first, in order to do that it has to be unlocked ...
Iv'e tried with adb & fastboot but nothing seems to work.
The phone (samsung S3 GT-I9300 android 4.3) remains locked.
Thanks in advance for your help
dodger1 said:
Hello,
I'm new to all this so forgive me my noobish questions. I've allready searched the internet for tutorials and how-to's but nothing seems to work.
Can someone help me on how to unlock the bootloader?
I would like to install a custom rom but need to root the phone first, in order to do that it has to be unlocked ...
Iv'e tried with adb & fastboot but nothing seems to work.
The phone (samsung S3 GT-I9300 android 4.3) remains locked.
Thanks in advance for your help
Click to expand...
Click to collapse
Are you sure that the BL is locked? Normaly it is unlocked ? so you can fash twrp to flash custom Roms
Sent from my Xiaomi Redmi Note 7 using XDA Labs
Snuk265 said:
Are you sure that the BL is locked? Normaly it is unlocked ? so you can fash twrp to flash custom Roms
Sent from my Xiaomi Redmi Note 7 using XDA Labs
Click to expand...
Click to collapse
I think it's locked ... if i try with adb & fastboot ... (several commands to check if the phone is locked i don't get an answer) ... only <waiting for device> message.
Is there any other way to check if it's locked?
I'm afraid that if i try to install TWRP it will block the phone and all i have left is a useless paper weight.
dodger1 said:
I think it's locked ... if i try with adb & fastboot ... (several commands to check if the phone is locked i don't get an answer) ... only <waiting for device> message.
Is there any other way to check if it's locked?
I'm afraid that if i try to install TWRP it will block the phone and all i have left is a useless paper weight.
Click to expand...
Click to collapse
The bootloader is not locked. Samsung phones don't have a fastboot mode, they have a download mode. You have two options for flashing twrp: odin or heimdall.
theandroid02 said:
The bootloader is not locked. Samsung phones don't have a fastboot mode, they have a download mode. You have two options for flashing twrp: odin or heimdall.
Click to expand...
Click to collapse
Hello,
I installed Odin307 and downloaded CF-root-sgs3-v6.4.tar, after connecting odin to my S3 and selecting the CF root file ... after the phone rebooted and went back to android i got the message "PASS" in odin.
So if i am correct, the phone should be rooted by now.
Now i guess: installing TWRP via odin and the google apps ... what version of Lineage Os would you recommend?
If i check on the website of lineage os, the samsung s3 i9300 is no longer available ...
Hi, you could follow this entire tutorial : https://forum.xda-developers.com/galaxy-s3/help/guide-tutorial-samsung-galaxy-s3-i9300-t3491788
Hello when i flash stock rom from fastboot legacy way it stucked on redmi logo and reboot itself every 1 or 2 sec. and if i flash from twrp it can boot how can i fix it?
please help me where is problem? i made wipe after falsh stock rom and result is same
Anticolick said:
Hello when i flash stock rom from fastboot legacy way it stucked on redmi logo and reboot itself every 1 or 2 sec. and if i flash from twrp it can boot how can i fix it?
please help me where is problem? i made wipe after falsh stock rom and result is same
Click to expand...
Click to collapse
It is not bootloop..it is hardbricked..same like mine
No solution yet because of xiaomi locked flashing by user via edl mode.
i found solution ;
And tutorial is mine
What should to do in case of infinite reboot on REDMI logo after stock rom flashed?
1) If Bootoader is unlocked, enter twrp; If it is closed, try to unlock it, if it is the same pc and account for first unlock can be unlock.
2) Install the twrp version of stock rom (can find on web)
if boots very good to rescue
3) Re-install stock rom from fastboot with flash_all.bat (dont wipe on installed, let it wipe itself.)
Use MiFlash20191206.zip , this miflashtool saves my life
4) If the device is turned on, should be turned 99% percent, You can use unlocked bl or lock with flash stock rom with flash lock script.
Congratulations you fixed the problem!!!
getsuga92 said:
It is not bootloop..it is hardbricked..same like mine
No solution yet because of xiaomi locked flashing by user via edl mode.
Click to expand...
Click to collapse
Look my tutorial
Anticolick said:
i found solution ;
And tutorial is mine
What to do in case REDMI logo restarts when stock rom is loaded
1) If Bootoader is turned on, enter twrp; If it is closed, try to open it, if it is the same pc and account, it opens for your luck.
2) Install the twrp version of stock rom
3) Re-install stock rom with flash_all.bat without wipe
MiFlash20191206.zip this miflashtool saves my life
4) If the device is turned on, should be turned on 99% lock yourself with flash all lock and continue on the road
Congratulations you fixed the problem
Click to expand...
Click to collapse
Sorry..i don't get it
No insult, could you use a proper English because i don't understand that
getsuga92 said:
Sorry..i don't get it
No insult, could you use a proper English because i don't understand that
Click to expand...
Click to collapse
Recheck update for you
Anticolick said:
Recheck update for you
Click to expand...
Click to collapse
And how come i can boot into twrp if the device reboot itself every 1 second??
The pc cannot detect it even i connect it using cable.
getsuga92 said:
And how come i can boot into twrp if the device reboot itself every 1 second??
The pc cannot detect it even i connect it using cable.
Click to expand...
Click to collapse
Press volume down and power simultaneously you will pass fastboot
Anticolick said:
Press volume down and power simultaneously you will pass fastboot
Click to expand...
Click to collapse
I think you misunderstand my problem here..
Maybe your device problem not the same as mine.
Hi guys
I have a Xiaomi Mi Note 10 Lite.
After upgrading to MIUI 12.5, the camera "macro" has stopped working. In the CIT test, it fails. I just ignored this, since i don't use Macro Camera.
After a week, the front camera has stopped working. This made me more nervous. Then, after a month, ALL Camera fails, and i notice the vibrator is no longer working too. I searched and some threads told to restore persist.img file, or just flash stock rom.
Ok, I unlocked the phone with "Mi Unlock", then i flashed the stock rom. The phone doesn't boot anymore. It is stucked in MI logo (about 3 months stucked).
I got a new phone but i want to repair my phone with tools.
I tried unnoficcial TWRP (the 3.4.2B get errors mounting the partitions) , tried OrangeFox (the touch doesn't work), tried the stock recovery, tried to flash Xiaomi.EU, tried to flash some of customs ROMs, NONE worked. I got stucked on mi logo forever.
And, it is hard to get the recovery. In 1 of 50 tries (holding the power and vol+) it gets to the recovery. It's hard, and i don't know why.
I don't know what to do. I've been trying to recover this phone about 3 months, and my last hope is asking to you.
I appreciate your help.
Hello ! Have you tried mi flash tool ?
Irugaka said:
Hello ! Have you tried mi flash tool ?
Click to expand...
Click to collapse
Yes, all things.
MiFlashTool, XiaomiToolV2, Mi PC Suite in recovery assistant, ALL THINGS.
All things stuck in MI logo.
jonnypontes said:
Yes, all things.
MiFlashTool, XiaomiToolV2, Mi PC Suite in recovery assistant, ALL THINGS.
All things stuck in MI logo.
Click to expand...
Click to collapse
did you tried this for data partition on TWRP ?
How to Fix TWRP Unable to Mount Storage, Internal Storage 0MB
Some TWRP users, especially those who install custom ROMs, sometimes run into an issue where TWRP will an error that reads “Unable to mount storage”. The
appuals.com
How to Install Xiaomi Mi Note 10 Lite Firmware Flash File
consumingtech.com
I have the same problem as you
The camera on my Messenger app is conflicted with some camera on my device, making it unusable, and so is the camera of the device itself. I decided to restart it and boom, it stuck in Mi logo. Did you fix it? Do you have any advice?
HTrang said:
у меня такая же проблема как у тебя
Камера в моем приложении Messenger конфликтует с какой-то камерой на моем устройстве, что делает ее непригодной для использования, как и камера самого устройства. Я решил перезапустить его и бум, он застрял в логотипе Mi. Вы исправили это? Есть ли у вас какие-либо рекомендации?
Click to expand...
Click to collapse
У меня тоже такая проблема, ошибка камеры, перезагрузил, теперь висит на заставке Mi. я не знаю как решить эту проблему
HTrang said:
I have the same problem as you
The camera on my Messenger app is conflicted with some camera on my device, making it unusable, and so is the camera of the device itself. I decided to restart it and boom, it stuck in Mi logo. Did you fix it? Do you have any advice?
Click to expand...
Click to collapse
i have the same problem exactly, my camera wasnot working i restarted the pone and it got stuck in MI logo, did you solve it?
try to wipe everything under twrp, use stock rom that u had working and install from twrp (recovery rom). if that doesnt work try to fix data partition under twrp (maby others). to make it clear:
1. wipe everything(if u feel it is necessary wipe partitions 1 by 1) and do factory reset under twrp
2. try to fix partitions especially data but maby all need this
3. go to fastboot mode and install stock rom which used to work. install it from cmd/powershell by using adb/fastboot command or miflash (had problems with xiaomi.eu and other roms when something fu..ed up)
if that doesnt work try tu use install on twrp with stock recovery rom (first do 1 and 2 aswell)
fixing partitions and factory reset after sometimes help to flash roms correctly.
hope i helped. if not let us know.
Uzul
Uzul Warthlokkur said:
try to wipe everything under twrp, use stock rom that u had working and install from twrp (recovery rom). if that doesnt work try to fix data partition under twrp (maby others). to make it clear:
1. wipe everything(if u feel it is necessary wipe partitions 1 by 1) and do factory reset under twrp
2. try to fix partitions especially data but maby all need this
3. go to fastboot mode and install stock rom which used to work. install it from cmd/powershell by using adb/fastboot command or miflash (had problems with xiaomi.eu and other roms when something fu..ed up)
if that doesnt work try tu use install on twrp with stock recovery rom (first do 1 and 2 aswell)
fixing partitions and factory reset after sometimes help to flash roms correctly.
hope i helped. if not let us know.
Uzul
Click to expand...
Click to collapse
i tried flashing twrp but it cannot enter in recovery mode, then i tried installing old stock rom with android 10 and still the same. it cannot enter in recovery mode (trtwrp-3.4.0-14-toco-mauronofrio) even with factory stock rom
Its stuck in mi logo or fastboot, cannot enter in recovery mode
GustavoLV21 said:
i tried flashing twrp but it cannot enter in recovery mode, then i tried installing old stock rom with android 10 and still the same. it cannot enter in recovery mode (trtwrp-3.4.0-14-toco-mauronofrio) even with factory stock rom
Its stuck in mi logo or fastboot, cannot enter in recovery mode
Click to expand...
Click to collapse
fasbot logo means that u r in fastboot mode then u can connect usb to pc and flash from miflash or install twrp by console. everything u want to flash from pc u do it in fastboot mode (there is only logo nothing else no menu console nothing just logo). u have to install drivers for adb and fastboot on your pc, also miflash got drivers aswell u have to install them. if u using fastboot or miflash method make sure your rom is fasboot rom, for twrp or stock recovery use recovery version of rom (for my phone fastboot roms usually 4,5-5 gb, recovery 3.5gb). if u r using recovery custom roms use twrp (also u can use fastboot command or adb in console for that) it will not work in miflash.
Uzul Warthlokkur said:
fasbot logo means that u r in fastboot mode then u can connect usb to pc and flash from miflash or install twrp by console. everything u want to flash from pc u do it in fastboot mode (there is only logo nothing else no menu console nothing just logo). u have to install drivers for adb and fastboot on your pc, also miflash got drivers aswell u have to install them. if u using fastboot or miflash method make sure your rom is fasboot rom, for twrp or stock recovery use recovery version of rom (for my phone fastboot roms usually 4,5-5 gb, recovery 3.5gb). if u r using recovery custom roms use twrp (also u can use fastboot command or adb in console for that) it will not work in miflash.
Click to expand...
Click to collapse
yep also tried that, i installed every fastboot rom version for my phone still nothing.
Did you try "fastboot boot twrp.img" instead "fastboot flash twrp.img"?
bomil said:
Did you try "fastboot boot twrp.img" instead "fastboot flash twrp.img"?
Click to expand...
Click to collapse
Ok i dont know if that is possible i tried fastboot flash boot boot.img or fastboot flash recovery recovery.img or twrp.img
I have tried installing every stock rom, tried installing different recoveries stock orange twrp, i have not tried installing custom rom because i dont know if its possible to install from fastboot.
could you confirm if that sentence its well written?
I think is fastboot flash boot boot.img no fastboot boot twrp.img
if it helps if i put fastboot continue, it just power off
Here is nice and well explained guide.