How to restore the A2017U Axon 7 to functional stock B20 ( System,Wifi,ETC ) with TWRP and locked bootloader
1) Download rczrider's TWRP System backup
2) Extract the A2017UV1.0.0B20 folder on the desktop.
3) Copy the content of the A2017UV1.0.0B20 folder in /sdcard/TWRP/BACKUPS/DEVICE_SERIAL_CODE_HERE/Stock
4) Download tenfar's B20 root kit and extract it on the desktop
5) Turn OFF the phone.
6) Hold both volume buttons and plug the USB cable in the phone. The screen should stay black when the cable is plugged in. (Make sure to have the Qualcomm 9008 drivers installed).
7) Open CMD in tenfar's B20 root kit folder and type: axon7root.exe -p (com port) (See tenfar's thread for help).
8) Once the boot.img and recovery.img are both installed successfully, hold volume up + power to restart the phone. You should arrive in TWRP.
9) Click on Restore->(Folder where the recovery is).
10) Make sure the System partition is checked and Swipe to restore.
11) Wipe Cache/Dalvik and then restart the phone. It should boot fine in Android.
12) BE PATIENT COMPLETE BOOT WILL TAKE SEVERAL MINUTES
NOTE : Step 3 - TWRP uses your device serial number to create /restore your backup , if you are not sure what it is just do a simple TWRP (Cache for sample) it will show now
Thanks to @DrakenFX, @tenfar, @rczrider and anyone else involved in this!
Wow thanks and the fixes are pouring in!
Sent from my SM-N930V using Tapatalk
But is no modem backup in this files?
Отправлено с моего HTC One M8 через Tapatalk
raber111 said:
But is no modem backup in this files?
Отправлено с моего HTC One M8 через Tapatalk
Click to expand...
Click to collapse
You shouldn't need it anyways, no modem file currently exist.
But after restoring my phone don't have any radio. No modem exist. No sim no Wi-Fi no Bluetooth
Отправлено с моего HTC One M8 через Tapatalk
raber111 said:
But after restoring my phone don't have any radio. No modem exist. No sim no Wi-Fi no Bluetooth
Отправлено с моего HTC One M8 через Tapatalk
Click to expand...
Click to collapse
Which Axon 7 you have??
1. A2017
2. A2017U
3. A2017G
raber111 said:
But after restoring my phone don't have any radio. No modem exist. No sim no Wi-Fi no Bluetooth
Click to expand...
Click to collapse
Not that I know of The only problem I had was that I had no WiFi (bluetooth and NFC still worked) and I fixed it by flashing the right boot.img file.
2017U. And I don't have Imei now...
Отправлено с моего HTC One M8 через Tapatalk
https://idlekernel.com/flash-tools/firmware/ailsa_ii_A2017U/B20/
here we have modem.bin file but i can't flash it over fastboot and i don't know how to make flashable zip for it ...
TWRP
So I have twrp installed already, should i just restore the folder?What do I do with the stock imgs?
Edit: Yes you do need to (without it wont pass ZTE Screen)
TDLR: When you go to wipe cashe. . .dont factory reset. Its a pain in the ass to fix.
I've pulled aboot, bluetooth, fbop, and modem. They can be found via the same link in my "untouched B20" page: http://forum.xda-developers.com/axon-7/development/untouched-b20-boot-recovery-files-t3443818
Hello many thanks for your post.
All content inside the zip file (forum.xda-developers.com/axon...files-t3443818 ), has to be extract into /sdcard/TWRP/BACKUPS/DEVICE_SERIAL_CODE_HERE/Stock?
edimorgado said:
Hello many thanks for your post.
All content inside the zip file (forum.xda-developers.com/axon...files-t3443818 ), has to be extract into /sdcard/TWRP/BACKUPS/DEVICE_SERIAL_CODE_HERE/Stock?
Click to expand...
Click to collapse
Yes. If you want you could just do a small backup in TWRP of the boot and it will create the right structure for you, after that you just have to drag the files in the right folder.
ZTE Axon 7, a2017U need support not able to get network, wifi, bluetooth!
Hello,
I have ZTE Axon 7, a2017U. I followed the instructions in this post.
After installing, my phone is not able to get network, wifi etc. The Baseband version is Unknown.
What should I do to install the radio (network, wifi, modem and bluetooth)?
kindly assist to solve the issue.
Many thanks for all support...
edimorgado said:
Hello,
I have ZTE Axon 7, a2017U. I followed the instructions in this post.
After installing, my phone is not able to get network, wifi etc. The Baseband version is Unknown.
What should I do to install the radio (network, wifi, modem and bluetooth)?
kindly assist to solve the issue.
Many thanks for all support...
Click to expand...
Click to collapse
I have same problem and I don't know what to do. When I tried to flash modem via fastboot i get error message. I can't find nviram files on phone . If you will find solution to fix that let us know. I think maybe stock image can help but for now isn't released yet.
Отправлено с моего HTC One M8 через Tapatalk
raber111 said:
I have same problem and I don't know what to do. When I tried to flash modem via fastboot i get error message. I can't find nviram files on phone . If you will find solution to fix that let us know. I think maybe stock image can help but for now isn't released yet.
Отправлено с моего HTC One M8 через Tapatalk
Click to expand...
Click to collapse
Where is the flashable modem file, please?
XblackdemonX said:
Not that I know of The only problem I had was that I had no WiFi (bluetooth and NFC still worked) and I fixed it by flashing the right boot.img file.
Click to expand...
Click to collapse
How did you flash the boot.img? (through twrp, fastboot, etc). I'm having the same problem as well; my Wifi doesn't work after this process.
Pollito788 said:
How did you flash the boot.img? (through twrp, fastboot, etc). I'm having the same problem as well; my Wifi doesn't work after this process.
Click to expand...
Click to collapse
normally you'd use "fastboot flash boot boot.img" from bootloader mode.
I need to return phone. Does anyone have the stock US bootloader? The one I have called stock shows as A2017UV1.0.0B20_boot, but the Build Time is in Chinese and I don't recall this being the case when I got the phone.
Thanks
Following this guide, I was finally able to get my phone to boot again (not even sure what I did wrong in the first place, following a well-known guide).
However, I have no radio/modem functions.... no cell connectivity, no wifi, bluetooth, etc. I've tried flashing rczrider's untouched modem backup, but I get an error about flashing a critical partition not being allowed. Here is the error. Can anyone help?
Code:
c:\Users\chris\Desktop\Chris Phone\Axon>fastboot flash radio modem.bin
target reported max download size of 536870912 bytes
sending 'radio' (97280 KB)...
OKAY [ 2.148s]
writing 'radio'...
FAILED (remote: Critical partition flashing is not allowed)
finished. total time: 2.170s
**EDIT**
I flashed tenfar's original modified boot (the one that is now crossed out) just for giggles, and now my phone boots AND has wifi.
http://forum.xda-developers.com/axon-7/development/wip-axon-7-root-bootloader-unlokced-t3441204
Related
Hi
I have locked my S5830i with pattern password to unlock and I can´t go to cwm to wipe and reboot. I can only go to download mode via USB JIG but after flash new stock firmware is same situation, locked and can´t always go to Download Mode.
Pls help how I can unlock, thank
Tested this: http://forum.xda-developers.com/showthread.php?t=2054182 too
but always locked
I KNOW CWM IS WOLUME UP+POWER+HOME BUTTON - - - NOT WORKING
Paul Koty said:
Hi
I have locked my S5830i with pattern password to unlock and I can´t go to cwm to wipe and reboot. I can only go to download mode via USB JIG but after flash new stock firmware is same situation, locked and can´t always go to Download Mode.
Pls help how I can unlock, thank
Tested this: http://forum.xda-developers.com/showthread.php?t=2054182 too
but always locked
I KNOW CWM IS WOLUME UP+POWER+HOME BUTTON - - - NOT WORKING
Click to expand...
Click to collapse
Wat? Just flash 3-file firmware via ODIN.
Отправлено с моего Nexus 7 при помощи Tapatalk
mradermaxlol said:
Wat? Just flash 3-file firmware via ODIN.
Отправлено с моего Nexus 7 при помощи Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2419734 restore/unbrick files that wipe all your data. Instructions inside with my poor English
This thread is locked but at least saved my life and time 3 times when I was on new laptop/pc
hi
i have an honor 7 from switzerland and i tried to install on him the PLK-AL10 6.6.1 - B651 full, ofcurse the instalation was stuck on 19% and i can't go to recovery,
what i can do to fix these?
thanks
update, i can't get the product ID (to find this, open the dialler and enter *#*#1357946#*#*) - cause i don't have dialer..and system....
what you advice me to do next?
First of all, I would guess you have a model PLK-L01, not AL10. Anyway, we need more information if we should help you. What does "can't go to recovery" mean exactly? What have you tried? What happens and what does not happen when you try? What happens when you connect the phone to a PC ?
Not sure if of any use, but try to connect the phone to a PC via USB Cable, then press volume UP and Power to boot into eRecovery, a second (and I think identical) recovery. Maybe that works? If you make any progress, try the Honor 7 MultiTool.
Let us know if you can make any progress.
yes its PLK-L01
i worked on the day with these and finally what i did is that i put the update.app into the micro sd card and than start the device + vol up+vol down and than the device probebly tooks the update.app that i add to the sd card and installed him correctly.
the case was that i probebly install at the first time locally version for AL10 and than i start MultiTool but the multitool request to open the bootloader in order to install the bootloader something that needs the productID that i can get if i have a dialer and enter *#*#1357946#*#* but i don't have any dialer since i don't have any system so...i don't know how, but it's worked as i wrote from the sd card
So you managed to install the UPDATE.APP package??
yes
Sent from my Nexus 6P using Tapatalk
I7210I said:
yes
Click to expand...
Click to collapse
Good.
Sent from my Huawei PLK-L01 using XDA Labs
I7210I said:
yes
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Just don´t forget, if you root the device, you must first unroot, flash stock recovery.img and boot.img and THEN update to whatever stock ROM version available.
no i won't be root the device,
i just want to know that now he is ok with stock rom(these i know) stock recovery and stock recovery, how can i know that for sure?
Sent from my Nexus 6P using Tapatalk
hi guys!
Anyone knows how to install twrp in the latest stock rom?
I tried in windows 10 using flash tools and a preloader error apperas.
In windows XP i could install twrp but it did not load when trying to access it.
Thanks!
Fran Montero said:
hi guys!
Anyone knows how to install twrp in the latest stock rom?
I tried in windows 10 using flash tools and a preloader error apperas.
In windows XP i could install twrp but it did not load when trying to access it.
Thanks!
Click to expand...
Click to collapse
it might not have loaded because it was maybe an updated twrp eith an old preloader, try flashing an older twrp or update preloader
Ruben Craveiro said:
it might not have loaded because it was maybe an updated twrp eith an old preloader, try flashing an older twrp or update preloader
Click to expand...
Click to collapse
Have you installed it already?
Many thanks!
Fran Montero said:
Have you installed it already?
Many thanks!
Click to expand...
Click to collapse
Im using latest twrp with updated preloader and LOS13
Hi,
I'm unsure if this method will work for you, but I also had "preloader Error message" in FlashTools trying to flash TWRP in Stock Rom 2016810 while trying to flash the Eragon ROM.
As the Stock ROM you are using (20171201) is kinda newer than stock 2016810 Im kinda assuming it should work the same.
In order for it to flash without errors, I did the following and worked fine :
Use FlashTools ver v5.1612 - https://www.androidfilehost.com/?fid=24591000424940027
Download your stock rom 20171201
https://mega.nz/#!atZAyKxb!i6jpNQNR_VZZ3nS79LhL2xi78WHx7XI4gKFllc8 RJKw
Then download TWRP_3.0.2.8.zip here: https://www.androidfilehost.com/?fid=24727369092696060
Unzip all and and copy the "MT6755_Android_scatter" & "recovery.img" from TWRP_3.0.2.8 folder into the Elephone_P9000_20170112 Rom folder.
Then open Flash Tools - add the scatter file from the Elephone_P9000_20170112 Rom folder
Untick everything in flashtools except the recovery and then try to flash, hopefully it will work for you too. without errors '
jotei66 said:
Hi,
I'm unsure if this method will work for you, but I also had "preloader Error message" in FlashTools trying to flash TWRP in Stock Rom 2016810 while trying to flash the Eragon ROM.
As the Stock ROM you are using (20171201) is kinda newer than stock 2016810 Im kinda assuming it should work the same.
In order for it to flash without errors, I did the following and worked fine :
Use FlashTools ver v5.1612 - https://www.androidfilehost.com/?fid=24591000424940027
Download your stock rom 20171201
https://mega.nz/#!atZAyKxb!i6jpNQNR_VZZ3nS79LhL2xi78WHx7XI4gKFllc8 RJKw
Then download TWRP_3.0.2.8.zip here: https://www.androidfilehost.com/?fid=24727369092696060
Unzip all and and copy the "MT6755_Android_scatter" & "recovery.img" from TWRP_3.0.2.8 folder into the Elephone_P9000_20170112 Rom folder.
Then open Flash Tools - add the scatter file from the Elephone_P9000_20170112 Rom folder
Untick everything in flashtools except the recovery and then try to flash, hopefully it will work for you too. without errors '
Click to expand...
Click to collapse
Thanks for the answer.
I tried and TWRP is flashed succesfully and i can even load it, but when rebooting system it is not loading, it remains on the withe elephone logo
Fran Montero said:
Thanks for the answer.
I tried and TWRP is flashed succesfully and i can even load it, but when rebooting system it is not loading, it remains on the withe elephone logo
Click to expand...
Click to collapse
Maybe you have a sd card formatted as internal storage?
Fran Montero said:
Thanks for the answer.
I tried and TWRP is flashed succesfully and i can even load it, but when rebooting system it is not loading, it remains on the withe elephone logo
Click to expand...
Click to collapse
Hi, I think this maybe to do with the new preloader etc..
I read this in the thread for TWRP for Elephone P9000 3.0.2-8:
1. load scatter.txt in earlier post.
2. select preloader, lk and boot imgs, location of these from the stock 20160810 ROM.
3. select recovery, location of TWRP img.
4. unselect everything else.
Click to expand...
Click to collapse
Here: https://forum.xda-developers.com/el...hone-p9000-t3426678/post70713618#post70713618
So maybe Unzip the 20171201 Rom, copy TWRP scatter & recovery.img to this folder, open flash tools and select recovery and point to recovery.img
But also select preloader, lk and boot img (double check they are pointing to corresponding files from the 20171201 ROM
Again, I am unsure if that will work but as I noticed the above post in the TWRP thread, thought it maybe relevant to your issue
PS: Windows 10 can be awkward with splash tools at times, I have windows 10 but in order for it to work - I have to press the Download in SplashTools, kinda count to 5, then hold vol + and then attach USB to my phone and it works fine
If your device already rooted, you can also install flashyfi and flash the .img file.
jotei66 said:
Hi,
I'm unsure if this method will work for you, but I also had "preloader Error message" in FlashTools trying to flash TWRP in Stock Rom 2016810 while trying to flash the Eragon ROM.
As the Stock ROM you are using (20171201) is kinda newer than stock 2016810 Im kinda assuming it should work the same.
In order for it to flash without errors, I did the following and worked fine :
Use FlashTools ver v5.1612 - https://www.androidfilehost.com/?fid=24591000424940027
Download your stock rom 20171201
https://mega.nz/#!atZAyKxb!i6jpNQNR_VZZ3nS79LhL2xi78WHx7XI4gKFllc8 RJKw
Then download TWRP_3.0.2.8.zip here: https://www.androidfilehost.com/?fid=24727369092696060
Unzip all and and copy the "MT6755_Android_scatter" & "recovery.img" from TWRP_3.0.2.8 folder into the Elephone_P9000_20170112 Rom folder.
Then open Flash Tools - add the scatter file from the Elephone_P9000_20170112 Rom folder
Untick everything in flashtools except the recovery and then try to flash, hopefully it will work for you too. without errors '
Click to expand...
Click to collapse
a bit late (did came to it to test your solution earlier) but it worked indeed. perfect, very much appreciated.
Can u upload 20171201 again?! Link is not working... Thx
opss said:
Can u upload 20171201 again?! Link is not working... Thx
Click to expand...
Click to collapse
You'll find a link here: https://forum.xda-developers.com/el...t/rom-stock-rom-android-6-0-12-01-17-t3542463
Thx dude
jotei66 said:
Hi, I think this maybe to do with the new preloader etc..
I read this in the thread for TWRP for Elephone P9000 3.0.2-8:
Here: https://forum.xda-developers.com/el...hone-p9000-t3426678/post70713618#post70713618
So maybe Unzip the 20171201 Rom, copy TWRP scatter & recovery.img to this folder, open flash tools and select recovery and point to recovery.img
But also select preloader, lk and boot img (double check they are pointing to corresponding files from the 20171201 ROM
Again, I am unsure if that will work but as I noticed the above post in the TWRP thread, thought it maybe relevant to your issue
PS: Windows 10 can be awkward with splash tools at times, I have windows 10 but in order for it to work - I have to press the Download in SplashTools, kinda count to 5, then hold vol + and then attach USB to my phone and it works fine
Click to expand...
Click to collapse
I've wasted countless hours trying to get spf to work with my windows 10 machine. Your solution worked like a charm, the flashing was successful (managed to get the process to work when before I was getting only preloader errors), however I still don't have twrp but the standard android recovery. Have you got any other solution that I should try? Cheers.
---------- Post added 9th May 2017 at 12:18 AM ---------- Previous post was 8th May 2017 at 11:43 PM ----------
thecrazyfarang said:
I've wasted countless hours trying to get spf to work with my windows 10 machine. Your solution worked like a charm, the flashing was successful (managed to get the process to work when before I was getting only preloader errors), however I still don't have twrp but the standard android recovery. Have you got any other solution that I should try? Cheers.
Click to expand...
Click to collapse
I reflashed and managed to get twrp but now the phone won't boot, it is stuck in the Elephone logo
thecrazyfarang said:
I've wasted countless hours trying to get spf to work with my windows 10 machine. Your solution worked like a charm, the flashing was successful (managed to get the process to work when before I was getting only preloader errors), however I still don't have twrp but the standard android recovery. Have you got any other solution that I should try? Cheers.
---------- Post added 9th May 2017 at 12:18 AM ---------- Previous post was 8th May 2017 at 11:43 PM ----------
I reflashed and managed to get twrp but now the phone won't boot, it is stuck in the Elephone logo
Click to expand...
Click to collapse
Have you tried pressing power and then keep finger pressed on vol up to go straight to TWRP recovery and then flashing a new ROM in TWRP ?
I didn't do that as I didn't have another rom saved in my phone. What I eventually managed to do was flash the official nougat via spf tool. I'm saying eventually because this piece of crap windows 10 didn't want to make the connection even with the volume up button. When I was going to give up and order a new phone, it connected and now I am happy even though I don't have twrp nor root, but not going to risk it again. Thanks again for your help though, greatly appreciated.
thecrazyfarang said:
I didn't do that as I didn't have another rom saved in my phone. What I eventually managed to do was flash the official nougat via spf tool. I'm saying eventually because this piece of crap windows 10 didn't want to make the connection even with the volume up button. When I was going to give up and order a new phone, it connected and now I am happy even though I don't have twrp nor root, but not going to risk it again. Thanks again for your help though, greatly appreciated.
Click to expand...
Click to collapse
No worries, just glad you got it sorted out.
Btw (although I know you dont really wanna risk trying it) my son uses my P9000 and has TWRP installed with no issues at all and root with Magisk.
But great yous sorted out
Root twrp Step by step for newbeee-
Ok,so I've installed TWRP 3.0.2-8 and when I start the phone it goes into the recovery... what to do next? Can I find a tutorial somewhere how to do this? And wich image can I use or is the best for the moment?
thx for helping...
Hi guys, long time ago, I bricked my phone (hard brick i think)
I was trying to install exposed or root, not sure what I was doing back then,
then the phone always in loop when I try to run it, there's only two thing that I can access to, eRecover (useless) and fastboot.
all I know about my phone is BLA-L29
I tried to download and use fastboot to flash system.img, I did that, but nothing happen.
I'm so bad at this, I have no idea what I'm doing, I searched a lot, but apparently I'm stuck.... help me out please. thanks
Amajed said:
Hi guys, long time ago, I bricked my phone (hard brick i think)
I was trying to install exposed or root, not sure what I was doing back then,
then the phone always in loop when I try to run it, there's only two thing that I can access to, eRecover (useless) and fastboot.
all I know about my phone is BLA-L29
I tried to download and use fastboot to flash system.img, I did that, but nothing happen.
I'm so bad at this, I have no idea what I'm doing, I searched a lot, but apparently I'm stuck.... help me out please. thanks
Click to expand...
Click to collapse
You should try the DLOAD method, but you must know the cust (c432, c636, etc.) too, not only the model (in your case BLA-L29).
Pretoriano80 said:
You should try the DLOAD method, but you must know the cust (c432, c636, etc.) too, not only the model (in your case BLA-L29).
Click to expand...
Click to collapse
Is there a way to know that? the phone isn't working :/
Thanks
Amajed said:
Is there a way to know that? the phone isn't working :/
Thanks
Click to expand...
Click to collapse
Try with this fastboot command : fastboot oem get-build-number
Or check on the box. You could also try checking with IMEI/SN on Huawei's website.
Pretoriano80 said:
Try with this fastboot command : fastboot oem get-build-number
Or check on the box. You could also try checking with IMEI/SN on Huawei's website.
Click to expand...
Click to collapse
Thanks I'll check that, right now I looked up the dload method, it seems that it uses a SD Card, my Phone does not have a SD Card slot, will I be able to use dload even still?
Thanks
EDIT:
I checked mine, it says BLA-L29 8.0.0.129(C185)
using fastboot oem get-build-number
Amajed said:
Thanks I'll check that, right now I looked up the dload method, it seems that it uses a SD Card, my Phone does not have a SD Card slot, will I be able to use dload even still?
Thanks
Click to expand...
Click to collapse
You can use an OTG cable with an USB stick, Memory Card reader, etc.
Pretoriano80 said:
You can use an OTG cable with an USB stick, Memory Card reader, etc.
Click to expand...
Click to collapse
Good, I'm downloading BLA-L29 8.0.0.129(C185) update.zip file, I'll extract it and copy the UPDATE.APP file to a folder named dload in the root of a memory stick, plug it in a USB Type C to USB Type A
then turning on the phone by pressing volume up + volume down + power button until Huawei logo appears.
and that's it, hopefully everything goes well.
Thanks
Amajed said:
Thanks I'll check that, right now I looked up the dload method, it seems that it uses a SD Card, my Phone does not have a SD Card slot, will I be able to use dload even still?
Thanks
EDIT:
I checked mine, it says BLA-L29 8.0.0.129(C185)
using fastboot oem get-build-number
Click to expand...
Click to collapse
Probably this firmware will work for you - > https://androidhost.ru/7oq <- read the instructions inside the firmware. You will also found infos about DLOAD here on Mate 10 forums.
Amajed said:
Good, I'm downloading BLA-L29 8.0.0.129(C185) update.zip file, I'll extract it and copy the UPDATE.APP file to a folder named dload in the root of a memory stick, plug it in a USB Type C to USB Type A
then turning on the phone by pressing volume up + volume down + power button until Huawei logo appears.
and that's it, hopefully everything goes well.
Thanks
Click to expand...
Click to collapse
Just drag the "dload" folder into the root of otg storage, then proceed with the buttons combo.
Better to format the usb storage as exFAT
Amajed said:
Hi guys, long time ago, I bricked my phone (hard brick i think)
I was trying to install exposed or root, not sure what I was doing back then,
then the phone always in loop when I try to run it, there's only two thing that I can access to, eRecover (useless) and fastboot.
all I know about my phone is BLA-L29
I tried to download and use fastboot to flash system.img, I did that, but nothing happen.
I'm so bad at this, I have no idea what I'm doing, I searched a lot, but apparently I'm stuck.... help me out please. thanks
Click to expand...
Click to collapse
Hi, it almost happened to me, I made him rebrand in his time and now I was going to update it and I was brickened I tried to put the cust and I deleted the IMEI and now it appears as Huawei p20 pro mate 10, In other words, it has two firmwares and I tried everything, I put the update I put other cust and nothing when it starts because it restarts, and the dead is no way to revive it [emoji21][emoji17]
Enviado desde mi RMX1931 mediante Tapatalk
Pretoriano80 said:
Probably this firmware will work for you - > https://androidhost.ru/7oq <- read the instructions inside the firmware. You will also found infos about DLOAD here on Mate 10 forums.
Just drag the "dload" folder into the root of otg storage, then proceed with the buttons combo.
Better to format the usb storage as exFAT
Click to expand...
Click to collapse
Thanks, I'm downloading yours as we speak,
I've downloaded this one:
http://huawei-update.com/firmware/6343/huawei-mate-10-pro/bla-l29
but after I tried the combination, I got massage says "Software Install failed"
is it because of my copy? or was it something else?
Pretoriano80 said:
Probably this firmware will work for you - > https://androidhost.ru/7oq <- read the instructions inside the firmware. You will also found infos about DLOAD here on Mate 10 forums.
Just drag the "dload" folder into the root of otg storage, then proceed with the buttons combo.
Better to format the usb storage as exFAT
Click to expand...
Click to collapse
I just downloaded your file, I dragged and dropped the dload folder into a formatted USB stick (exFAT) but still, gives me the following error: (Software Install Failed)
maybe worth mentioning, I did (a year ago) install TWRP then I uninstalled it, does this have to do with anything?
Amajed said:
I just downloaded your file, I dragged and dropped the dload folder into a formatted USB stick (exFAT) but still, gives me the following error: (Software Install Failed)
maybe worth mentioning, I did (a year ago) install TWRP then I uninstalled it, does this have to do with anything?
Click to expand...
Click to collapse
Probably you have a "hibrid" firmware, what version did you tried to flash with fastboot?
Pretoriano80 said:
Probably you have a "hibrid" firmware, what version did you tried to flash with fastboot?
Click to expand...
Click to collapse
You mean a year ago? I don't really remember, but if you mean now, I tried this post:
https://forum.xda-developers.com/showpost.php?p=76060051&postcount=10
it doesn't say which version
and for some reason my phone is unrecognized when I enter Fastboot. I tried multiple drivers, but I always end up with usb not recognized by windows
Amajed said:
You mean a year ago? I don't really remember, but if you mean now, I tried this post:
https://forum.xda-developers.com/showpost.php?p=76060051&postcount=10
it doesn't say which version
Click to expand...
Click to collapse
Try this :
1) Download BLA-L29 C185 8.0.0.129 firmware from Firmware Finder
2)Extract system, kernel and recovery_ramdisk from update.app
3)Flash the extracted images with fastboot
4) Try again with the DLOAD method
P. S. You could also try to do a Factory Reset before step 4.
Edit: Windows 10 might require a fix for the drivers, iirc. Otherwise you could try a Linux Live setup (you can find one on XDA, especially designed for ADB and Fastboot use).
Pretoriano80 said:
Try this :
1) Download BLA-L29 C185 8.0.0.129 firmware from Firmware Finder
2)Extract system, kernel and recovery_ramdisk from update.app
3)Flash the extracted images with fastboot
4) Try again with the DLOAD method
P. S. You could also try to do a Factory Reset before step 4.
Click to expand...
Click to collapse
Will do that as soon as I figure out why my phone is not recognized by windows, it was working before, now no matter what drivers I install, it keep saying my USB in not recognized .....
Pretoriano80 said:
Try this :
1) Download BLA-L29 C185 8.0.0.129 firmware from Firmware Finder
2)Extract system, kernel and recovery_ramdisk from update.app
3)Flash the extracted images with fastboot
4) Try again with the DLOAD method
P. S. You could also try to do a Factory Reset before step 4.
Edit: Windows 10 might require a fix for the drivers, iirc. Otherwise you could try a Linux Live setup (you can find one on XDA, especially designed for ADB and Fastboot use).
Click to expand...
Click to collapse
Any way I can recover the IMEI, or reinstall everything and it appears as mate 10? [emoji21][emoji17]
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
Any way I can recover the IMEI, or reinstall everything and it appears as mate 10? [emoji21][emoji17]
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
You are hijacking this thread, please open a new thread for your problem exactly, so we can avoid confusion.
Pretoriano80 said:
Try this :
1) Download BLA-L29 C185 8.0.0.129 firmware from Firmware Finder
2)Extract system, kernel and recovery_ramdisk from update.app
3)Flash the extracted images with fastboot
4) Try again with the DLOAD method
P. S. You could also try to do a Factory Reset before step 4.
Edit: Windows 10 might require a fix for the drivers, iirc. Otherwise you could try a Linux Live setup (you can find one on XDA, especially designed for ADB and Fastboot use).
Click to expand...
Click to collapse
I have two problems now :/
Extracting system.img takes for ever, as I'm writing now, it's still extracting, even tho the bar is full.
the second problem is, I couldn't find "recovery_ramdisk"
there is "RECOVERY_RAMDIS.img" and there is "RAMDISK.img"
which one is it?
Sergiocubano1 said:
Any way I can recover the IMEI, or reinstall everything and it appears as mate 10? [emoji21][emoji17]
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
So I flashed 4 files:
fastboot flash system SYSTEM.img
fastboot flash ramdisk RAMDISK.img
fastboot flash kernel KERNEL.img
fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img
using the Live Linux you mentioned.
Now I'll go back to the dload and see if it works
Amajed said:
So I flashed 4 files:
system.img
ramdisk.img
kernel.img
recovery_ramdis.img
using the Live Linux you mentioned.
Now I'll go back to the dload and see if it works
Click to expand...
Click to collapse
Yes, i forgot that emui8 has the ramdisk too, so flash that too.
fastboot flash ramdisk ramdisk.img
fastboot flash recovery_ramdisk recovery_ramdis.img
I AM NOT RESPONSIBLE FOR ANYTHING - BRICKED PHONES NOTHING.
Hi,
I've managed to get pixel experience on my rmx2111.
I will share the steps here.
What you need:
1. mtkclient
2. pixel experience gsi.
3. pbrp
4. vbmeta
5. a brain
Steps:
Step1. Install mtkclient - follow GitHub for the tutorial.
Step 2. Shut off the device.
Step 3: Run
Code:
mtk da seccfg unlock
Step 4: Get into BROM mode: shut down and then both vol buttons while plugging in the device.
step 5. unplug the cable and then hold all buttons until it reboots.
step 6. quickly setup the phone.. - skip accounts etc.
step 7. do
Code:
adb reboot fastboot
to get into fastbootd
step 8.now do fastboot devices to verify the device is there.
step9 Now run these commands
Code:
fastboot erase system
fastboot flash system PATH-TO-IMG
fastboot erase recovery vbmeta
fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img
fastboot flash recovery pbrp.img.
once done,
Code:
run fastboot reboot recovery
.
Once in PBRP, hit format and swipe to format dalvik cache etc.
Now reboot to the system..
congrats u should be there now.
thanks for your help i can finally get rid of this ****ty realme ui
you can even dualboot with it
Khanbeats said:
Друг у тебя есть бэкап прошивки с реалми 5г ??? после неудачной прошивки мой сенсорный экран не работает, нужен файл oppo_custom.img и другие системные файлы,я их по ошибке отформатировал/
Click to expand...
Click to collapse
Hello, I dont speak russian but you can search around google for a firmware file and then use ofp extractor and SP Flash tool to recover.
Khanbeats said:
I tried 1000 different ways nothing works, I need a backup file from the same phone as mine) can you extract the backup from your phone and download it for me.????
Click to expand...
Click to collapse
I don't think you find a specific oppo_custom for your device.
I uploaded this collection here https://forum.xda-developers.com/t/...ui-function-please-help.4420657/post-86750983 you can flash it and try booting one by one.
You can use mtk-client to write them onto your device, and take a backup from the one you actually have.
Khanbeats said:
I tried everything one by one, nothing comes out, the touch screen does not work, there is no wi-fi
Click to expand...
Click to collapse
Strange, I have RMX2151, at least 3 of them worked.
Keep in mind that, you have to flash one and try to boot, either to recovery or to system, to check if the touch is working, while you are not able to boot to any of these modes, you couldn't check that, I mean, an oppo_custom file can get your touch, to work again, but any of them have the ability to let device booting.
Baseband and Wi-Fi issues are fixed, flashing any stock RUI2 ROM.
Khanbeats said:
now I can go into the recovery and it almost loads into the menu but crashes on the yellow realm logo, wi fi has earned but the touchscreen does not work, what should I do next ???
Click to expand...
Click to collapse
Well, be sure, that now like you can boot to recovery, to try, methodically, one by one of the oppo_custom images, and see if the touch can work. Be sure to back up the oppo_custom, that actually you have, that at least allowed you to boot to.
Apart those oppo_custom, that appeared with "download not complete..." warning, those that didn't boot at all.
One tip, you can realize that the brightness is maximized, when the oppo_custom works.
Did you flash a RUI2?
Khanbeats said:
rui 2 что это такое и как прошить?
Click to expand...
Click to collapse
English is required.
RUI2 is Android 11, C07,09,15,16, there are many versions. Like any ofp ROM can be flashed through SPFT, I didn´t see an ozip to flash through recovery
Use rui1 ofp and flash with bootloader unlocked.
Khanbeats said:
Firmware with the letter C at the beginning does not work, the screen does not light up.
Click to expand...
Click to collapse
Try a different version
<Moderator Edit>: Quoted post removed since I've deleted it.
1. setup device after reboot
2. stop going after me because you bricked your device and randomly switching up languages.
not my fault :/
These modifications are not related the kernel correct? This Pixel Experience ROM works on top of the existing kernel install? As far as I've seen the kernel source was never released for the rmx2111.
htc_unenthusiast said:
These modifications are not related the kernel correct? This Pixel Experience ROM works on top of the existing kernel install? As far as I've seen the kernel source was never released for the rmx2111.
Click to expand...
Click to collapse
If you emailed realme kernel open source team, they would tell you they will be releasing kernel of RMX2111 on Q4, 2022.
Looks like this didn't come true unfortunately. There is hope. I see they created repositories for the Realme 7 pro but they are empty.
Edit: The realme 7 pro folders are now populated!
htc_unenthusiast said:
Looks like this didn't come true unfortunately. There is hope. I see they created repositories for the Realme 7 pro but they are empty.
Edit: The realme 7 pro folders are now populated!
Click to expand...
Click to collapse
sir, realme 7 Pro is a complete different phone compared to a realme 7 5G...
the naming sounds like it's the same series since they look similar, but the inside is different