[Q] LG Optimus G Menu Button Quit Working - AT&T LG Optimus G

Hello All,
This is my first post on this forum. I tried searching, but haven't found the answer yet so posting here.
I have an LG Optimus G which I bought about 2 months ago from ebay. Phone was in brand new condition and the seller claimed that he only used it once (a few hours) but didn't like the interface so he went back to iPhone. The phone has worked flawlessly until today when the menu button quit working. It is not registering any touch on that side; although the button lights up when the home and back buttons or the screen is used. It is only the menu button that has gone bad. I have not recently installed any updates either. The last update I installed was 11/19/2013. It is running Android version 4.1.2.
Is there a fix to this problem? I am really bummed that being my first android phone, I was starting to like this phone a lot and now this problem has come up!
Any help will be appreciated
Thanks

Vortex777 said:
Hello All,
This is my first post on this forum. I tried searching, but haven't found the answer yet so posting here.
I have an LG Optimus G which I bought about 2 months ago from ebay. Phone was in brand new condition and the seller claimed that he only used it once (a few hours) but didn't like the interface so he went back to iPhone. The phone has worked flawlessly until today when the menu button quit working. It is not registering any touch on that side; although the button lights up when the home and back buttons or the screen is used. It is only the menu button that has gone bad. I have not recently installed any updates either. The last update I installed was 11/19/2013. It is running Android version 4.1.2.
Is there a fix to this problem? I am really bummed that being my first android phone, I was starting to like this phone a lot and now this problem has come up!
Any help will be appreciated
Thanks
Click to expand...
Click to collapse
Welcome to the Community.
Although , I haven't heard about this problem earlier. But in case if that's a hardware problem , then with some tweaks , on-screen buttons can be used , like in N4. It's an alternative.
However , for that the phone should be rooted.
In case if you have warranty available , then you should probably take it to the nearest service center. But if not , then I guess rooting it shouldn't cause any issue , as there is no warranty left to void.
Apparently , is there any app that you have installed recently that is meant for tweaking some settings of your droid ??

Rishi. said:
Welcome to the Community.
Although , I haven't heard about this problem earlier. But in case if that's a hardware problem , then with some tweaks , on-screen buttons can be used , like in N4. It's an alternative.
However , for that the phone should be rooted.
In case if you have warranty available , then you should probably take it to the nearest service center. But if not , then I guess rooting it shouldn't cause any issue , as there is no warranty left to void.
Apparently , is there any app that you have installed recently that is meant for tweaking some settings of your droid ??
Click to expand...
Click to collapse
Rishi,
Thank you for the welcome and the quick reply. I didn't install any app for tweaking the settings. The last two apps I installed were Mercury Messenger and Skype.
As far as warranty goes, how do I find out if it is still in warranty or not since I bought the phone on ebay? Not sure how long the seller had the phone before I bought it.
Do you think hard resetting would help?
Thanks

Vortex777 said:
Rishi,
Thank you for the welcome and the quick reply. I didn't install any app for tweaking the settings. The last two apps I installed were Mercury Messenger and Skype.
As far as warranty goes, how do I find out if it is still in warranty or not since I bought the phone on ebay? Not sure how long the seller had the phone before I bought it.
Do you think hard resetting would help?
Thanks
Click to expand...
Click to collapse
If it were a hardware problem, I don't think hard reset will do any good.
But you can try to take a backup and then try resetting it once.
As far as warranty is concerned, you can check with the owner of the phone from whom this phone was purchased on eBay. Of he has a valid bill with remaining warranty then maybe you could be lucky.
Sent from my LG-E970 using Tapatalk 2

You can try this to check if it's really not registering any touch on the home key.
GO through this step. ( I assume , you're on Stock )
In the phone type in : 3845#*970#
It'll open a hidden menu with loads of options for testing .
GO to : HW Device test (options 2 from top)
-> Touch test, ( option 4 from top.)
->Touch sensing test.
You can perform various touch test and buttons test there to see what areas are having trouble registering touch inputs.

Rishi. said:
You can try this to check if it's really not registering any touch on the home key.
GO through this step. ( I assume , you're on Stock )
In the phone type in : 3845#*970#
It'll open a hidden menu with loads of options for testing .
GO to : HW Device test (options 2 from top)
-> Touch test, ( option 4 from top.)
->Touch sensing test.
You can perform various touch test and buttons test there to see what areas are having trouble registering touch inputs.
Click to expand...
Click to collapse
Thanks Rishi,
I performed the touch test and yes the menu location is not registering touch. Rest everything else is registering touch correctly. I have contacted the seller to see if they can help.
So, say if it is not in warranty, what else can be done?
Thanks!

If not under warranty then it's going to cost quite a bit. I have no idea about the cost and internals though.
IMO, you can continue with the onscreen overlay button fix, if it asks too much to get repaired.
It'll like as if you were using a nexus 4 with external memory support and lte.

https://www.box.net/s/aul9oyk1q1bx7ykjala0
Link for service manual.

adfurgerson said:
Link for service manual.
Click to expand...
Click to collapse
Thanks adfurgerson,
I will go through the manual from home.

ChummyDays said:
try going to the LG website and requesting a repair. I got mine off of Ebay as well and surprisingly it was still covered. (proximity sensor broke and it was repaired by LG)
Sent from my Optimus G using Tapatalk 2
Click to expand...
Click to collapse
Thanks for your reply, ChummyDays,
Question though; how did you establish the proof of purchase LG requires you to send (I am guessing, you bought yours used like mine)?

I dropped my phone few days ago and now my home, menu and back buttons are not working properly. espesially the back button 'goes on' sometimes and it shuts everything what i open immediately. home and menu buttons just dont respond sometimes on my touch. Is there anyway I can fix it myself? I also thought about the on screen buttons, but couldnt find any tweaks for that.

if your buttopns r broke install xposed, will need root and install gravity box and enable the navigation bar.

Related

Help! My touch pro's keyboard wont work!

Hey guys, I just got my touch pro last week and now the keyboard wont work. No drops or water damage. It wont light up or anything. I dont want to have to go back to the sprint store, so if u guys have any suggestions that would be awesome. Thanks.
Sorry
I hate to be the bearer of bad news, but I had the same thing happen to me. I spent probably a combined total of 8 hours on the phone with different people before I got any kind of solution. I couldn't find anything online. I was out of the initial Sprint Warranty. So Sprint said, sorry, you're gonna have to pay for a whole new device. That wouldn't work, the device was just 3 months old. So I called HTC, and at first they said there was nothing they could do either, until I talked to one person who forwarded me to PCD. They were able to fix it, for free under warranty, they replaced some RFID tag (IDK what that meant, it was in this checklist of tests they sent back) and sent the phone back. All I had to pay was shipping to their Repairs center. The bad thing was, it took them 3 weeks to work on it (only 4 days were shipping there and back). I hope I have been helpful, and I am sorry about the bad news. I know the feeling.
Hey, i had the same problem but i went to sprint and change my device, the new one works perfect, my advice go back and change it.
Bigswigg said:
Hey guys, I just got my touch pro last week and now the keyboard wont work. No drops or water damage. It wont light up or anything. I dont want to have to go back to the sprint store, so if u guys have any suggestions that would be awesome. Thanks.
Click to expand...
Click to collapse
i had the same problem i went to sprint and change my device, the new one works perfect, so my advice go back to the store and replace it for a new one, take care......
Not much but maybe
Had one that same thing happened. Performed hard reset and corrected it maybe temp fix though but it worked so far about a week of good use so far.
I had the same thing on my Verizon Pro, what I found was (I took mine apart) was that the cable had came loose from it's connector, I just had to reseat it and works perfect. By the way I bought it that way (got a great deal because it didn't work).
kilroy1stcav said:
I had the same thing on my Verizon Pro, what I found was (I took mine apart) was that the cable had came loose from it's connector, I just had to reseat it and works perfect. By the way I bought it that way (got a great deal because it didn't work).
Click to expand...
Click to collapse
I have the same keyboard problem...it doesn't work most of the time, but once in a blue moon it will....the keyboard lights come on, but no input from keys work....so is that still a connector issue you think? Did you keyboard backlight come on?
2nd question: How do I open my TP?
Thanks.
Here's a link with the Touch Pro teardown, thanks to BigDiesel07 @ PPCGeeks. Hope this helps a bit...
http://forum.ppcgeeks.com/showthread.php?t=49932&highlight=teardown+touch+pro
G00gle26 said:
I have the same keyboard problem...it doesn't work most of the time, but once in a blue moon it will....the keyboard lights come on, but no input from keys work....so is that still a connector issue you think? Did you keyboard backlight come on?
2nd question: How do I open my TP?
Thanks.
Click to expand...
Click to collapse
I am not sure if my keys lite up or not, it has been a while, but it sounds to me like a possible connection issue with it being intermittent.
happened to me twice hopefully tp2 fixes this little issue.
same problem!!! just go to sprint, they can fix the problem... "they changed my keyboard"!!!
yah me too, i took my touch pro back to Sprint and they changed the whole touch screen part of the phone for me in 45 mins and for some reason that fixed the keyboard as well, so i guess the problem is in the touch-screen part of the phone, not the keyboard itself
Try this. Take out the battery and pinch extremely hard on the space button to re-seat the keyboard cable.
I'm not completely sure if it will work as I got my phone replaced before I found this fix.
Try it and let me know if it helped any.
zKnuckles said:
Try this. Take out the battery and pinch extremely hard on the space button to re-seat the keyboard cable.
I'm not completely sure if it will work as I got my phone replaced before I found this fix.
Try it and let me know if it helped any.
Click to expand...
Click to collapse
Genius! However, i am not. Your solution worked, however i fear it may be a temporary solution? I want to get this fixed while under warranty and dumb ol' me fixing it, well, now i won't have anything to show the sprint store
zKnuckles said:
Try this. Take out the battery and pinch extremely hard on the space button to re-seat the keyboard cable.
I'm not completely sure if it will work as I got my phone replaced before I found this fix.
Try it and let me know if it helped any.
Click to expand...
Click to collapse
this worked for me! thanks!!! I was getting ready to open up the phone or go to the sprint store. You the man.
this is a very common problem because this also hppened to me.
the represenstative told me that putting on 3rd party software can help the keyboard going out
USAF22 said:
I hate to be the bearer of bad news, but I had the same thing happen to me. I spent probably a combined total of 8 hours on the phone with different people before I got any kind of solution. I couldn't find anything online. I was out of the initial Sprint Warranty. So Sprint said, sorry, you're gonna have to pay for a whole new device. That wouldn't work, the device was just 3 months old. So I called HTC, and at first they said there was nothing they could do either, until I talked to one person who forwarded me to PCD. They were able to fix it, for free under warranty, they replaced some RFID tag (IDK what that meant, it was in this checklist of tests they sent back) and sent the phone back. All I had to pay was shipping to their Repairs center. The bad thing was, it took them 3 weeks to work on it (only 4 days were shipping there and back). I hope I have been helpful, and I am sorry about the bad news. I know the feeling.
Click to expand...
Click to collapse
go to your phone carrier.
demand a NIB replacement. (new in box)
it states in the manufacturing warranty that you get a NIB replacement for the keyboard. it's a known problem, tell them to call the tech department or htc tech support and they will tell the rep the same thing.
Don't leave without a NEW replacement.
Don't take a refurb(mailed out) replacement.
throwback1718 said:
this is a very common problem because this also hppened to me.
the represenstative told me that putting on 3rd party software can help the keyboard going out
Click to expand...
Click to collapse
hahahahahha.
I call BS on that one. lol.
I did it... removed bat', piched key b'. it now works... eeeeeeeeyesss
Got a 0 hour touch pro less than 2months, keyboard started lagging since 2 weeks ago, then extra spaces and duplicate letters and finally died after a charging session in a hot weather day.
Removed battery and press spacebar top and bottom very hard to resit the keyboard connector fixed the issue.
Same happened to me on my Alltel CDMA Touch Pro after having owned it for about 4 weeks. It would also not shut off the screen backlight. Was very odd. Luckily, my Alltel store is literally across the alley from my house, so I ran a full backup using Sprite Backup, walked over there, and they swapped it out for a new phone within 10 minutes. Took me another 45 minutes to restore the backup, but wasn't nearly as bad as sending it away for several weeks to be repaired.

[Q] [TOUCH ISSUE] help needed. The correct part to replace!!

Guys finally my Atrix too suffering from touch issues, dead spots on the screen, 2-3 touch points on screen, sleep/wake restores touch temporarily.... Since this phone is not released in my country India, most service centers refused to take this phone to repair I finally decided to buy the digitizer and give it to them! bought the following item
http://www.ebay.in/itm/281018075402...X:IT&_trksid=p3984.m1497.l2649#ht_2414wt_1041
Now i'm little confused, is this the thing to be replaced ??
Thanks :angel:
Looks like it.
ravilov said:
Looks like it.
Click to expand...
Click to collapse
Thanks a lot !!

Galaxy s3 home button issue?

Hello,
I got my galaxy s3 for a little over 5 months now. About 3 months ago this started to happen:
/watch?v=yck3t4-tDDA (youtube vid, can't post links yet)
This clicking noise and the loose home button (end of vid) is bothering me quite a bit. I was thinking
to go to the store and ask what they think about it, however i'm aware that if i can get the phone replaced
the new one may even be worse ( screen problems, overheating, short battery life, etc). So i thought i'll ask
it here first , what do you guys think and do some of you have the same problem?
Thx in advance!:good:
wondertiger said:
Hello,
I got my galaxy s3 for a little over 5 months now. About 3 months ago this started to happen:
/watch?v=yck3t4-tDDA (youtube vid, can't post links yet)
This clicking noise and the loose home button (end of vid) is bothering me quite a bit. I was thinking
to go to the store and ask what they think about it, however i'm aware that if i can get the phone replaced
the new one may even be worse ( screen problems, overheating, short battery life, etc). So i thought i'll ask
it here first , what do you guys think and do some of you have the same problem?
Thx in advance!:good:
Click to expand...
Click to collapse
I also think that the home button becomes loose
Plus the power button becomes loose,too
Sent from my GT-I9300 using xda premium
Hmmm, maybe then its just normal ...Anyway then I just have to hope the home button won't fall out my phone
It isn't normal, mine doesn't have that issue. (6 months)
Go back to the store. And look if you can get a new one. I think they will send it to a samsung repair center.
Sent from my GT-I9300 using xda app-developers app
I want to go back but the problem is that the button is working fine and gives me a satisfy click. As well my s3 is awesome in every other way: very long battery life, phone is not getting hot, etc. I think i will contact the customer service first. I will let you guys know.
i think it is normal, my brand new white also clicks when you hit it like than, and also it is a bit loose when sliding up and down. but it works perfectly and i wouldnt even notice this if i didnt watched your video

EVO 3d touch screen

hi guys,
im having a problem with my evo 3d. it seems the lower part of the screen is not working. so i cannot unlock my phone now.
< 0 OK buttons are not working anymore but when i go to camera(no password required for some reason,) that part of the screen is working fine.
wanted to know how can i disable the password at least so i can use it and wanted to know if its a software or hardware problem
thanks
_Intel_ said:
hi guys,
im having a problem with my evo 3d. it seems the lower part of the screen is not working. so i cannot unlock my phone now.
< 0 OK buttons are not working anymore but when i go to camera(no password required for some reason,) that part of the screen is working fine.
wanted to know how can i disable the password at least so i can use it and wanted to know if its a software or hardware problem
thanks
Click to expand...
Click to collapse
is the phone rooted and if so, is it a custom rom?
How much of it isn't working? And is it just unresponsive or is the display out as well?
I have a strip of my screen the doesn't work that's righty over where the top row of keys is.
hi guys,
yes rooted,
virtuous rom dont know what version..
my phone has a passkey lock and the part where the "ok" button row is not working.
please let me know that i can at least disable the password lock..
_Intel_ said:
hi guys,
yes rooted,
virtuous rom dont know what version..
my phone has a passkey lock and the part where the "ok" button row is not working.
please let me know that i can at least disable the password lock..
Click to expand...
Click to collapse
So is it just a strip of the screen?
If you really really wanna be able to get it unlocked, Download the correct version of clockwork mod for our phone one that's not touch, has to use the volume rockers and fresh install the rom, Or as a matter of fact, Just boot into whatever recovery you have and clear data/factoryreset, that'll get rid of your lock pin
Hello from me too!
I have a strip on my touch screen that doesn't work. It's right where the Search button and Install on Play Store is and Clear on the Phone notifications, too.
It had the stock rom, I have replaced the screen with the digitizer when it fell down. It worked after that. I had to unscrew the phone one more time because my LCD was touching the screen and the phone had gone mad. After that, and a couple of days later, I noticed that the strip didn't work anymore. Today I finally flashed a new rom (King Cobra 3d) and nothing's changed so I figured it might be a hardware problem...
What's your opinion?
Thank you!
Common Hardware Problems on evo3D
Its the hardware. and your carrier should change it at no cost. (Sprint)
fatisis said:
Hello from me too!
I have a strip on my touch screen that doesn't work. It's right where the Search button and Install on Play Store is and Clear on the Phone notifications, too.
It had the stock rom, I have replaced the screen with the digitizer when it fell down. It worked after that. I had to unscrew the phone one more time because my LCD was touching the screen and the phone had gone mad. After that, and a couple of days later, I noticed that the strip didn't work anymore. Today I finally flashed a new rom (King Cobra 3d) and nothing's changed so I figured it might be a hardware problem...
What's your opinion?
Thank you!
Click to expand...
Click to collapse
ive had the top bar just under my notification bar non working for a few months now, and its starting to pi$$ me off
I've replaced my digitizer twice myself. I got a cheaper one the first time, and figure that's what I get for trying to go on the cheap. (I was out of warranty). Sorry to say it but it could be that again.
Sent from my shooter using xda app-developers app
I think I don't have a warranty because I've changed it myself. It's my fault...
I think I'll buy a new one... I unscrewed it a while ago so I could see if sth had been misplaced or if the digitizer had scratches or sth like that.
I saw that the ribbon's top had been ripped off right where it bends on top of the LCD... Don't know if that's the problem...
p.s. I live in Greece. My carrier is Cosmote. We don't have Sprint here...
Yep, if the ribbon cable is ripped, that would be your problem. Don't go too cheap on your replacement. Good luck!
Sent from my PG86100 using xda app-developers app
toad6386 said:
Yep, if the ribbon cable is ripped, that would be your problem. Don't go too cheap on your replacement. Good luck!
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
I wonder why is there only one part of the touch that doesn't work if the ribbon is like that, in the bending spot...
thank you! i'll try it as soon as i can and i'll get back!
If i buy a new one from Amazon will it be allright? It costs around 10 pounds... The other one that i've changed and now it has a problem i've bought it for 60 euros from a local store here in Greece...
fatisis said:
If i buy a new one from Amazon will it be allright? It costs around 10 pounds... The other one that i've changed and now it has a problem i've bought it for 60 euros from a local store here in Greece...
Click to expand...
Click to collapse
The last one I got from Amazon is the one I'm using now (about a month old), and spent $20 US on it, which was NOT the cheapest of them. Not knowing the exchange rate right off hand, would venture to say the one you're speaking of is not a "cheap" one. So go for it. Just take your time replacing it and be careful with ALL the ribbon cables. Good luck!

It sucks having a cracked screen, but LG has impressed me with this feature.

I didn't know this existed until I dropped me G2 a few minutes ago and the screen cracked.
Check out the attachment!
Wow, I wonder if this could have anything to do with the screen issues, maybe they are doing something sneaky?
Sorry about your phone!
bhsvault said:
I didn't know this existed until I dropped me G2 a few minutes ago and the screen cracked.
Check out the attachment!
Click to expand...
Click to collapse
wow.. pretty cool
Pretty genius i must say
Sent from my LG-D803 using XDA Free mobile app
jl10101 said:
Wow, I wonder if this could have anything to do with the screen issues, maybe they are doing something sneaky?
Sorry about your phone!
Click to expand...
Click to collapse
Yeah it sucks. I'm taking it to a guy I know at sprint today. Does anyone know if they can swap out phone models rather than giving an exact replacement? This is the 3rd G2 I've had in the past few months and I'm kind of getting fed up with it. ( The other issues I had weren't related to physical damage)
bhsvault said:
Yeah it sucks. I'm taking it to a guy I know at sprint today. Does anyone know if they can swap out phone models rather than giving an exact replacement? This is the 3rd G2 I've had in the past few months and I'm kind of getting fed up with it. ( The other issues I had weren't related to physical damage)
Click to expand...
Click to collapse
You surely cant blame this current issue on them. :laugh:
Its hard, Ive tried before with other phone manufacturers.
easyguy said:
You surely cant blame this current issue on them. :laugh:
Its hard, Ive tried before with other phone manufacturers.
Click to expand...
Click to collapse
Yeah - it's all me this time. It fell from knee height so I am a bit frustrated about that. I have other phones take huge falls and no sustain any damage whatsoever.
Power your phone OFF
once completely shut down
Press and hold
Volume Up Button
Power Button
Volume Down Button
*All at the same time
Keep holding when you see the LG logo
This gives you access to Hardware Key Control Mode
There you can access these features as well.
It also shows your IMEI number and barcode.
***Sorry while in this menu it does not allow to take a screen shot.***
Its awesome that lg has created that kind of feature so they are thinking also about its customers. I still wonder where the sensor would be located
I saw this feature when I got my first G2. At that point there were no cases because it was so new. Of course I dropped it on the way to work and cracked the screen. Unfortunately I couldn't ever get the hardware to work because it killed all areas.
Sent from my LG-LS980 using XDA Premium 4 mobile app
FYI I broke mine as well and could not get past a lock screen to connect with computer and backup my phone data. You can simply use an OTG cable and a regular mouse. Operating the phone completely with a mouse
Sent from my Nexus 7 using Tapatalk
Whene i cracked my screen nothing like this showed. Luckily there's usb otg and mouse and this saved me.
Interesting feature, and one that I hope I never have to use
It's unfortunate that new phones don't have these features. and that they break so easily :S

Categories

Resources