{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Intro:
This is GNOME II the DIY ROM. Freedom to customize the ROM whatever you want it to be.
Code:
[COLOR="Red"]DISCLAIMER[/COLOR]:
I'm not responsible if you brick your device.
You flash this ROM at your own risk.
Follow procedures so that you'll be fine.
Don't point fingers if you have done something wrong,
ask questions if you're kinda lost on what to do and people here will help you out.
Features:
ROM
- Built from source 4.4.2_r1 KOT49H
- SM Toolchain 4.8.3
- Bionic/Krait Dalvik Optimizations
- -O3 Global strict Aliasing
- Xposed in Settings
- Navbar Shortcuts / Quick launch
- NavBar buttons customization
- GoogleDialer by default
- Non Intrusive InCallUI by OMNI
- Swap WiFi, BT and Location behaviour in QS
- AOSPAL Lockscreen Notifications
- App Ops in Settings
KERNEL
- SM 4.8.3
- Linux 3.4.75
- -O3 Optimizations
- PA Half breed color preset
- BFQ IOSCHED
- Faux Sound Control
- Bricked d2tw and s2w/s2s
- BLX/BLE
- Min: 384 Max: 1512
- Check SOURCE for full changelog
Code:
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=4.4.2
TARGET_PRODUCT=full
TARGET_BUILD_VARIANT=eng
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm
TARGET_ARCH_VARIANT=armv7-a
TARGET_CPU_VARIANT=generic
TARGET_GCC_VERSION_ROM=4.8
TARGET_GCC_VERSION_KERNEL=4.8
HOST_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-3.5.0-44-generic-x86_64-with-Ubuntu-12.10-quantal
HOST_BUILD_TYPE=release
BUILD_ID=KOT49H
OUT_DIR=out
============================================
Instructions:
- Flash ROM, Addons, GApps, SuperSU and Busybox
- Reboot
- Profit
WARNING: This ROM has its own Optimizations. DO NOT FLASH any other dalvik/bionic/krait, etc. Optimizations, you might not get a bootable device. I warned you already so no hard feelings if you break something.
How to activate Xposed:
- Settings
- Activate Xposed
- Download Modules
- Reboot
WHAT IS XPOSED? Click This!
Downloads:
GNOME add-ons
Latest Release
Kernel
Changelog:
Code:
12/15/13
- Initial Release (Check Source)
12/17/13
- Bionic/Krait Dalvik Opt
- NavBar button cust.
- Swap QS behaviour: BT, WiFi and Location tiles
12/20/13
- SM toolchain for Both ROM and KERNEL
- Dalvik/Bionic/Krait Optimizations
12/25/13
- New Enhanced Stock AOSP Kernel 3.4.75
- Lockscreen Notifications
- Dalvik, Bionic/Krait Tweaks
01/07/14 Kernel
- SM 4.8.3
- -O3 Optimizations
- Faux Sound Control
- Multi ROM support
- BFQ IOSCHED as default
- Min/Max 384/1512
- BLX
- dt2w s2w/s2s
Source:
ROM: https://github.com/TheGNOMEProject
Kernel: https://bitbucket.org/Gnome509
Known Issues:
- Power menu on NavBar Shortcuts not working (Working on it)
- Backup Restore function (Google is giving us a hard time with this)
- Gravity Box NavBar Modifications doesn't work on this ROM it'll give you a boot loop
once you enable it.
Thanks and Shoutouts:
@MikeCriggs
@ayysir
@sparksco
@ak
@David:D
@Mikeonic
@PartimusPrime
@rovo89
AOSPAL
AOSP
OMNI
xda-developers
Hit the Thanks button or Donate to me to build a new machine for faster builds
Build GNOME II from source
You can init my repo:
Code:
repo init -u https://github.com/TheGNOMEProject/platform_manifest -b Gnome-44
repo sync -j4 --no-clone-bundle
Build:
Code:
. build/envsetup.sh
Choose:
Code:
lunch
Start the build:
Code:
make otapackage -j(x)
TheGNOMEProject Banner
Banner:
Yay. Downloading now! Woo-hoo.
Sent from my Nexus 4 using xda app-developers app
Awesome Bro... Downloading now!
Sent from my Nexus 4
Gnome said:
Intro:
This is GNOME II + PAEK the DIY ROM. Freedom to customize the ROM whatever you want it to be.
Features:
ROM
- Built from source 4.4.2_r1 KOT49H
- SM Toolchain 4.8
- Xposed in Settings
- Navbar Shortcuts / Quick launch
- GoogleDialer
- InCallUI by OMNI
- App Ops in Settings
KERNEL
- Sweep 2 wake/sleep
- Double tap to wake
- I/O scheduler: bfq, noop, deadline, cfq
- CPU Governor: intellidemand, ondemand, userspace, powersave, interactive, performance
- GPU Governor: performance, ondemand, simple, interactive
- BLE
- PA Halfbreed color preset
Instructions:
- Flash ROM, GApps and SuperSU
- Reboot
- Profit
How to activate Xposed:
- Settings
- Activate Xposed
- Download Modules
- Reboot
WHAT IS XPOSED? Click This!
Downloads:
GNOME II v1.0
Changelog:
12/15/13
- Initial Release (Check Source)
Source:
https://github.com/TheGNOMEProject
Known Issues:
- Power menu on NavBar Shortcuts not working (Working on it)
Thanks and Shoutouts:
@MikeCriggs
@ayysir
@sparksco
@PartimusPrime
@rovo89
AOSPAL
AOSP
xda-developers
Hit the Thanks button or Donate to me to build a new machine for faster builds
Click to expand...
Click to collapse
Thanks for your rom,can you advise which gapps should we flash? PA or others?
Any GApps package will do.
Nice one @Gnome. Love all the work you guys do.
Sent from my Nexus 4 using Tapatalk
@Gnome thanks for the hard work, time, and effort put on this cuz its awesome.
Again, thankful for what y'all do.
Sent from my Nexus 4 using XDA Premium 4 mobile app
nice, one question does this have optimized dalvik?
ruzkay said:
nice, one question does this have optimized dalvik?
Click to expand...
Click to collapse
Nah, but the whole build build is optimized by SM.
As always perfect... Thanx a lot Gnome! Loving the smoothness of the whole package!
Keep Em coming... I'm always down to flash a Gnome build!
Why is my friend not a Recognized Developer it's crazy if you ask me!
Sent from the Future Back to my Gnome II powered DeLorean!
I used cwm 6.0.4.3, wiped system, factory data reset and wiped dalvik. Flashed ROM, PA's latest gapps package and SuperSU 1.80.
It seems Googles backup and restore function is missing. All my WiFi passwords (from family members households are no longer stored) it didn't install any of the apps it usually does.
So I was wondering if it has something to do with the recovery chosen or if this is known.
Sent from my Nexus 4 using Tapatalk
strapped365 said:
I used cwm 6.0.4.3, wiped system, factory data reset and wiped dalvik. Flashed ROM, PA's latest gapps package and SuperSU 1.80.
It seems Googles backup and restore function is missing. All my WiFi passwords (from family members households are no longer stored) it didn't install any of the apps it usually does.
So I was wondering if it has something to do with the recovery chosen or if this is known.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
No but I think he's working on it...
Sent from the Future Back to my Gnome II powered DeLorean!
strapped365 said:
I used cwm 6.0.4.3, wiped system, factory data reset and wiped dalvik. Flashed ROM, PA's latest gapps package and SuperSU 1.80.
It seems Googles backup and restore function is missing. All my WiFi passwords (from family members households are no longer stored) it didn't install any of the apps it usually does.
So I was wondering if it has something to do with the recovery chosen or if this is known.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Yeah its borked out, I'm working on it as we speak, jst got home from work.
Gnome said:
Yeah its borked out, I'm working on it as we speak, jst got home from work.
Click to expand...
Click to collapse
Ah cool! I just wanted to make sure it wasn't something I could have avoided by just using TWRP. I may finally make the switch to trwp anyways if its solid.
Sent from my Nexus 4 using Tapatalk
Just flashed it and i am loving gamma calibration preset ! Play store is fcing when i try to download something. Rest is fine so far
Working great for me as always, using banks gapps.
There is only a handful of custom roms that comes with its own customized kernel with lots of essential features.
Welcome back & keep it up @Gnome
I'm guessing ART doesn't work due to xposed integration?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OFFICIAL DISCLAIMER
PHP:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About Us
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
We are dedicated to providing Android users with smooth, stable and fast Roms. We start with a fast, and lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash!
The-Team
Liquid0624
Liquidzgrl
Jarrid42
Rohan32
Itsmikeramsay
Dagr8
Deadman96385
Jdkoreclipse
Amplified
Dhacker29
Droyd
Toxicthunder
Features:
Code:
Rom build Linaro GCC 4.7.4 Toolchain
-O3 Strict-Aliasing & ISO C++11 Mode
ARM Optimized String Handling Routines
Linaro and Code Aurora Optimaztions
Customizable lockscreen buttons/sliders
Chronus clock widget
Customizable hardware and software keys
Transparent navbar and status bar
Customizable navbar ring
Navigation bar widgets
Customizable power menu
Notification power widget
Customizable quicksettings panel
Statusbar mods
Theme engine
Quiet hours
Volume rocker music controls
Full Rotation
Customizable battery and notification light
And way more then this...
Screenshots
RECOMANDATION:Do not use superwipes
Required HBOOT : 1.49.xxxx
S-OFF
Radio : 11.77.3504.00P_11.25.3504.06_M get it from HERE
4ext recovery
Follow these exact steps to install the ROM :
If coming from an other ROM do this :
1. Wipe data, cache, and system (wipe all partitions except sdcard if on 4ext recovery) if coming from any other ROM
2. Flash ROM
3. Flash GAPPS
4. Reboot
5. ???
6. Profit
If coming from previous build of this ROM :
1. Wipe cache and dalvik-cache
2. Flash ROM
3. Flash GAPPS
4. Reboot
5. ???
6. Profit
To enable Developer Options and Performance go to Settings > About Phone and repeatedly press Build Number.
If you have a problem with ADB, update your android-sdk to latest version.
To enable Advanced reboot menu got Settings > Developer Options > check Advanced reboot
Known Bugs:
3D recording not working
Ocazional data drops.
Bluetooth Tether not working
In-call volume sometimes gets reseted to maximum. Temporary fix:ENABLE TOUCH SOUNDS
For some users camera might not work as it should (exposure problems)
Hdmi not working
Changelog:
Code:
[SIZE=5]ROM Changelog[/SIZE]
[URL="http://bit.ly/13MAuMJ"]LiquidSmooth v2.9 OFFICIAL[/URL]
[URL="http://pastebin.com/Bfj30Nqq"]LiquidSmooth v2.8 OFFICIAL[/URL]
[URL="http://pastebin.com/bAY6jaeX"]LiquidSmooth v2.7 OFFICIAL[/URL]
[URL="http://pastebin.com/DVAHE9D6"]LiquidSmooth v2.5 OFFICIAL[/URL]
[URL="http://pastebin.com/TtqyUb8R"]LiquidSmooth v2.4 OFFICIAL[/URL]
[URL="http://pastebin.com/adTdrP3P"]LiquidSmooth v2.3 OFFICIAL[/URL]
Thanks to:
Dastin1015
Agrabren
Helicopter88
Bigwillyg
Evervolv Team
GOO.IM TEAM
Source code:
Device repos & kernel can be found here & here (kernel is compiled with this toolchain)
LiquidSmooth Downloads & Changelog:
5 AUGUST:
Kernel:
Revert JOE'S RCU
Linux kernel updated to 3.0.87-3.0.88
ROM:
Built with -O3 flags
Compiled with Linaro Toolchain 4.7.4 06.2013
Upstream changes from here
Download HERE | md5:6af8e7166b8a16dc2be78f9f3a893fe5
MIRROR
ROM uses my kernel from CM-10.1 !
19 JULY:
Kernel:
implement JOE'S RCU
cpuidle: backport driver from 3.1
workqueue: backport from Linux 3.6.11 (mrg666)
lib/lzo: huge LZO decompression speedup on ARM by using unaligned access
block: row: change hrtimer_cancel to hrtimer_try_to_cancel
Revert CGROUP_TIMER_SLACK commits ( battery drain )
Patch: Linux Kernel to 3.0.86
Compiled with Linaro Toolchain 4.7.4 07.2013-cortex a8
ROM:
Built with -O3 flags
Compiled with Linaro Toolchain 4.7.4 06.2013
Download HERE | md5:f987eaeecadbd71ff33a6d3ee2d305a7
MIRROR
ROM uses my kernel from CM-10.1 !
15 JULY:
Updated ROM to LiquidSmooth 2.9
Download HERE | md5:936aebf031a858cf8e41f4305d043329
MIRROR
ROM uses my kernel from CM-10.1 !
10 May:
Initial build -> Download: HERE
Google Apps Package for 4.2.2 [/CENTER]
one more
Getting busy lately :good:
Thanks
Good .. following !!
I'll flash immediately .. I mean after I get my screen replaced sounds great though .. Well done
Sent from my GT-P5100 using Tapatalk HD
The ROM is amazing for me. But i have a little problem, when my phone goes into sleep it reboots,like the screen off CPU values are too low or something. I don't get it. Any help?
raZr0708 said:
The ROM is amazing for me. But i have a little problem, when my phone goes into sleep it reboots,like the screen off CPU values are too low or something. I don't get it. Any help?
Click to expand...
Click to collapse
See if increasing cpu voltages for all freq ( with Kernel Tunner ) helps. Increase it by 25mV.
If it still reboots give me a last_kmsg.
hi there
i suppose Wifi Tethering and Video Recording are also working
since I've been following your ROM progress, thought i drop a quick note in case you missed it
johnnyslt said:
one more
Click to expand...
Click to collapse
Going to give this one a try.
Off-topic but do you have any plans to port Paranoid Android? Really like the look of the Halo feature.
Autocorrected from my EVO 3D running CM 10.1 / Fleksy Beta
d3xp2pc said:
Going to give this one a try.
Off-topic but do you have any plans to port Paranoid Android? Really like the look of the Halo feature.
Autocorrected from my EVO 3D running CM 10.1 / Fleksy Beta
Click to expand...
Click to collapse
Helicopter88 did PA builds in the past, ask him if he can update it.
johnnyslt said:
Helicopter88 did PA builds in the past, ask him if he can update it.
Click to expand...
Click to collapse
Ok thanks.
Edit: been having a play around. As I understand it when you select expanded desktop the notification bar should hide itself. I've enabled pie controls and expanded desktop but the notification bar is still shown.
Autocorrected from my EVO 3D running CM 10.1 / Fleksy Beta
Tried this rom is fast and very clean and I like how the settings are arranged. I'm considering to make my daily rom, in a word a top-notch rom :beer:
Sent from my Evo 3D GSM
Everything works?
I tried several JB but video and playback is a bit glichy (2D, i know 3D is not working yet)
Sent from my HTC EVO 3D X515m using Tapatalk 2
d3xp2pc said:
Going to give this one a try.
Off-topic but do you have any plans to port Paranoid Android? Really like the look of the Halo feature.
Autocorrected from my EVO 3D running CM 10.1 / Fleksy Beta
Click to expand...
Click to collapse
There's a pacman ROM available for the evo 3d
Sent from my A2109A using Tapatalk HD
flashallthetime said:
There's a pacman ROM available for the evo 3d
Sent from my A2109A using Tapatalk HD
Click to expand...
Click to collapse
Ok thanks, will see if I can find it.
Autocorrected from my EVO 3D running CM 10.1 / Fleksy Beta
d3xp2pc said:
Ok thanks, will see if I can find it.
Autocorrected from my EVO 3D running CM 10.1 / Fleksy Beta
Click to expand...
Click to collapse
Here's the pacman ROM in the CDMA development threads with a link to gsm versionhttp://forum.xda-developers.com/showthread.php?t=2040832
Sent from my A2109A using Tapatalk HD
flashallthetime said:
Here's the pacman ROM in the CDMA development threads with a link to gsm versionhttp://forum.xda-developers.com/showthread.php?t=2040832
Sent from my A2109A using Tapatalk HD
Click to expand...
Click to collapse
Thank you, will download and give it a try.
Autocorrected from my EVO 3D running CM 10.1 / Fleksy Beta
6h using:
no bug found yet
Smooth
Good work John
12h using:
Random data drop
Some lag (delay) at opening of something.
Still smooth (with quite apps and widgets installed)
Camera gives fast but wrong focus most of the time!!!
Battery out in 12h (medium use, voltage lowered to [email protected], not really for daily use)
24h using:
No calendar / widget, when adding calendar widget to clock, it doesn't work either --> no calendar or widget.
Sent from my Evo 3D GSM using Tapatalk 2
John, can I use stock kernel with this rom?
Sent from my Evo 3D GSM using Tapatalk 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is OmniROM?
A new Android custom rom has been announced at the BABBQ (Big Android BBQ) by @XpLoDWilD, @Chainfire, @Dees_Troy & Team. For more information go to omni rom's site: http://omnirom.org/
This is Unofficial build compiled by me! I'll try to do daily releases until Omni team releases stable official builds! Also I have began compiling the ROM's with the latest Linaro 4.7 toolchain and -O3 flags with Bulletproof kernel. Thanks to @scrosler, @jakdillard, @DJLamontagneIII for all of the information and tips on building ROMs and @flar2 for letting me use his kernel, and finally thanks to @2jzmoe for testing out the initial builds.
If you are looking for flo version go here: http://forum.xda-developers.com/showthread.php?t=2533936
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* cyber warfare, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device. I will just laugh nefariously
* in your face! And if you dont like this rom, stay away from this thread!
*/
Screenshots:
Features:
Code:
- Floating-Window
- Bulletproof 2.2+ Kernel
- Art and Dalvik Tweaks
- built with latest Linaro 4.7 toolchain
- rooted with latest SuperSU
- Krait optimizations for Flo/Deb
- Launch SuperSU from settings
- Lockscreen Notifications
Download Links:
Deb Folder: http://d-h.st/users/dre1187/?fld_id=31406#files
GApps: http://forum.xda-developers.com/showthread.php?t=2397942
SuperSu: http://forum.xda-developers.com/showthread.php?t=1538053
Mirror Links:
Deb Folder: http://www.androidfilehost.com/?a=show&w=files&flid=11094
How To Flash Coming From New Rom:
Wipe / Factory Reset
Install Omni Rom
Install GApps
Wipe Cache and Dalvik
Reboot and Enjoy
How To Flash Updates:
Install OmniRom
Install GApps
Wipe Cache and Dalvik
Reboot and Enjoy
What is Working:
Everything
Other Information:
- change log found in post #2
ROM Information:
Deb Source: https://github.com/havok87/android_device_asus_deb
Kernel Source: https://github.com/flar2/flo/tree/Bulletproof Credits: @flar2
Change log:
https://changelog.omnirom.org/#/flo/next
06/23/2014
- include 'Heads Up'
- updated lockscreen notifications
- switched back to Bulletproof kerne
06/20/2014
- merge tag 4.4.4_r1
06/12/2014
- merge 4.4.3_r1.1
- updated lockscreen notifications
- updated animation control
- updated floating window / multi-window
- removed dalvik and art tweaks for now until I test more
04/29/2014
- added ElementalX kernel in place of Bulletproof
- OmniROM source updates
- updated Lockscreen Notifications
04/22/2014
- omni source updates and bugfixes
04/10/2014
- latest Omni sources
- added in 'Floating Window' in place of Multi-window
- added in App Circle sidebar launcher (Settings --> Interface --> More) Note: this must be used to activate floating window apps, also any app that has Samsungs Multi-Window support listed in there manifest will be added into the launcher automatically
- bugfixes for Quiet Hours
- RecentsPanel: Make CircleMemoryMeter bigger
04/03/2014
- latest Omni sources
- latest Multi-Window Patch
- latest Quiet Hours (includes bugfixes and patches)
- add in Nav bar height/width change options
- add in RecentsPanel:CircleMemoryMeter bigger
03/25/2014
- latest Omni Sources
- added in Animation Controller
- added more dalvik tweaks
- updated lockscreen notifications
03/10/2014
- ROM compiled with 1/14 linaro toolchain
- ART optimizations
- updated lockscreen blur enhancements
- updated lockscreen notifications
- added in changelog (can be found in Settings --> About tablet)
- ditched the linaro opts/changes for now as some/most of them were from 4.2 will need to go through and be more selective
- ditched MotoX dalvik patches for now due to ART changes however I may add them back
02/13/2014
- https://changelog.omnirom.org/#/flo/1392173545
- USB-OTG has NTFS and FAT support
02/09/2014
- latest Omni sources
- add in USB-OTG support
02/06/2014
https://changelog.omnirom.org/#/flo/1391676542
- same extras as before (lockscreen notifications, configurable rotation)
- added in ADB paranoia mode (Settings --> USB Debugging)
- added in change device hostname (can be found in Settings --> USB Debugging)
- added in OmniSwitch as default recents handler (must be enabled in Settings --> More)
02/03/2014
- https://changelog.omnirom.org/#/flo/1391326501
- Multi-Window PS22
just in case...
Sweet! Another rom for Deb. Looking forward to see how this runs....:good:
Awesome.... OmniROM ?
Thanks a lot.
Flashing now!!! ?
Sent from my Nexus 7 using Tapatalk
Nice. Patch for SMS included? I mean thecframework-res change.
User_99 said:
Nice. Patch for SMS included? I mean thecframework-res change.
Click to expand...
Click to collapse
More then likely no...I didnt know the patch was needed. I only have flo so forgive my lack of knowledge :/
Sent from my Nexus 7 2013 using Tapatalk
No problem. You do a great job.
You need to open bools.xml in the text editor of your choice. You're looking for the line that says
<bool name="config_voice_capable">false</bool>
There is a change in bool.xml - included in framework-res.apk needed. All you need to do is change false to true, so you should end up with
<bool name="config_voice_capable">true</bool>
After that you can install some less apk to have native SMS on deb again.
User_99 said:
No problem. You do a great job.
You need to open bools.xml in the text editor of your choice. You're looking for the line that says
false
There is a change in bool.xml - included in framework-res.apk needed. All you need to do is change false to true, so you should end up with
true
After that you can install some less apk to have native SMS on deb again.
Click to expand...
Click to collapse
Building new version now will post link in about 2 hrs.
Edit: update is up please download 1/16 version and let me know SMS status please
Sent from my Nexus 4 using Tapatalk
new update is up lots of new features, change log in post #2
link: http://d-h.st/zr4
dre1187 said:
new update is up lots of new features, change log in post #2
link: http://d-h.st/zr4
Click to expand...
Click to collapse
Looks good and no errors or force closes but I'm getting pretty bad battery life. Currently at 40% used in only 15 hours with less than an hour screen time and using wifi. Bbs screener attached. This is after setting up everything and first full charge.
As a reference, using stock 4.4 Rom previously would last at least 3 days with the same usage.
dave- said:
Looks good and no errors or force closes but I'm getting pretty bad battery life. Currently at 40% used in only 15 hours with less than an hour screen time and using wifi. Bbs screener attached. This is after setting up everything and first full charge.
As a reference, using stock 4.4 Rom previously would last at least 3 days with the same usage.
View attachment 2524721
Click to expand...
Click to collapse
Thanks for the feedback! not too sure what to do to make better i think maybe its the sweep 2 wake functions causing that as well I noticed live wallpapers chewed up the battery as well. I'll take a look and see what I can find no guarantees though
Sent from my Nexus 4 using Tapatalk
Forgot about s2w etc as I use a case with the magnet. Assume bulletproof has no config so I could install the full elementalx and disable that stuff to see if it helps.
I disabled the live wallpapers at the start and never use them anyway. So won't be that in my case.
Also don't have any partial or kernel wakelocks over about 3 mins so the thing is sleeping fine. Must be Wi-Fi on 100% but don't recall if stock Rom did the same thing?
dave- said:
Forgot about s2w etc as I use a case with the magnet. Assume bulletproof has no config so I could install the full elementalx and disable that stuff to see if it helps.
I disabled the live wallpapers at the start and never use them anyway. So won't be that in my case.
Also don't have any partial or kernel wakelocks over about 3 mins so the thing is sleeping fine. Must be Wi-Fi on 100% but don't recall if stock Rom did the same thing?
Click to expand...
Click to collapse
using trickster you can disable s2w functions or a text editor will disable it. the only thing bulletproof does offer is adjustable clocks speeds. Finally from what i recall Wi-Fi is on 100% in stock roms
I'll try that next. Currently charging it up to test what happens if WiFi is set to turn off when sleeping. Because of lte, have to do airplane mode first then turn WiFi back on otherwise during sleep, WiFi shuts off and 4G kicks in which probably uses more battery.
dre1187 said:
Building new version now will post link in about 2 hrs.
Edit: update is up please download 1/16 version and let me know SMS status please
Click to expand...
Click to collapse
Looks quite good. SMS features are available. Thx. :good:
Only one hint: BasicSmsReceiver.apk is not needed if CellBroadcastReceiver.apk is also added for the SMS feature.
dre, my idea didn't yield any better battery life. I then tried disabling s2w and still no difference.
Going to install stock rom to get some better baseline figures and try again as I like the rom. :thumbup:
dave- said:
dre, my idea didn't yield any better battery life. I then tried disabling s2w and still no difference.
Going to install stock rom to get some better baseline figures and try again as I like the rom. :thumbup:
Click to expand...
Click to collapse
Sorry to hear that its not working out...if you think its kernel related I could build one with stock kernel instead but to be honest I don't know how much of a difference it would make as bulletproof kernel is basically stock with s2w and d2tw functions :/
Sent from my Nexus 4 using Tapatalk
Nah I wouldn't bother as I agree that the bulletproof kernel shouldn't cause any adverse effect. I've installed the stock 4.4.2 ROM and wil let it run a day or so to get a proper baseline with some BetterBatteryStat dumps then try yours again and compare. See if I can find where the extra drain is attributed to.
dre1187 have compared to stock and cannot find any appreciable difference in wakelocks (kernel or partial) or even CPU states for the same period of time and usage (actually under stock usage was higher even) except to say that this ROM has 3x the battery consumption. Very strange. Good luck with future builds, I'll give it another shot in the future.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RaCyanOS by Racpu_
Hello community XDA forum!
I come to present my new work is a compilation of Marshmallow 6.0 CM13 Nightlies
The ROM is based on last CM13 Source and the last commit's
Telegram Group: https://telegram.me/joinchat/BxXQtQhgGWf2i0Ks7TYiyQ
Kernel Source: https://github.com/Racpu/android_kernel_oneplus_msm8974
Kernel Source: https://github.com/acuicultor/android_kernel_oneplus_msm8974
I hope you enjoy Rom
Features:
All Cyanogen 13 features
Improved Script to install in secundary (MultiRom)
Kernel Exec (MultiROM)
Include OxygenOS firmware for better GSM signal
SuperSU v.2.68 (thanks Chainfire)
Include Full BusyBox
XposedInstaller Material (thanks rovo89) and DVDandroid
Addon.d script for Xposed to survive updates (thanks objr)
Adaway Ad's Block
Kernel Audiutor
CPU Spy Material (thanks existz)
AudioFX MaxxAudio w/ 10 band EQ (thanks Floydfire)
Bootanimation NuclearTeam ® | RaCyanOS
OTA Updater
Etc...
Kernel Features::
RADIOACTIVE KERNEL - Reborn
First of all, I have to thank the whole TeamNuclear team for helping me and to accept the team.
It is a great pleasure to be part of this great team, this kernel is optimized and bug's free, I RECOMMENDED.
INFO
Compiled with Linaro 4.9.4
Same of boeffla kernel except for boeffla sound replaced with Franco sound in order to use other tweaker apps
Compiled with Linaro 4.9.4
-Ofast optimized
Graphite flags
GPU optimization flags
Disabled lot of debbuging in order to gain speed
Adreno idler
Added some cool governors
Msm mpdecision aka Bricked hotplug (enabled by default)
Zen decision hotplug driver
Alucard hotplug driver ( disabled temporally)
NOTE: ZZmoove native hotplug can be used with ZZmoove governor selected as governor and changing the tunable (disable_hotplug to 0) or via terminal using (stop/start mpdecision to activate or desactivate)
Changelog:
Version 20.0 - 31/03/2016:
##### RACYANOS CHANGELOG #####
######### 31-03-2016 #########
*Remove custom firmware Frankenstein Release
*Add OxygenOS firmware for better GSM signal
*Add KernelAdituorMod - More settings to tuner kernel
Project name: android
*Filipe Carreto - Fix Tools
Project name: cts
*Aaron Holden - Any charging device will stay awake during CTS
Project name: android_frameworks_base
*d34d - LLS: Add LiveLockScreenController
Project name: android_prebuilts_cmsdk
*Adnan Begovic - prebuilts/cmsdk: Update release api text for LL.
Project name: android_packages_apps_CMFileManager
*jaffersulaiman - Default file manager fails to search files with Russian file name
Project name: android_packages_apps_Settings
*Filipe Carreto - Update to RaCyanOS V20.0
*Filipe Carreto - change package name "kernel adiutor mod"
*d34d - LLS: Add LiveLockScreenSettings to ENTRY_FRAGMENTS
*Roman Birg - Settings: implicitly link to lls settings
*d34d - LLS: Use LiveLockScreenManager for selecting LLS
Project name: android_packages_apps_FMRadio
*Gabriele M - Fix force close when Google Play Music is not installed
Project name: android_packages_services_LiveLockScreenService
*d34d - LLS: Add live lock screen service [2/4]
Project name: android_packages_inputmethods_LatinIME
*Michael Bestas - LatinIME: Disable Hungarian spell checking
*Michael Bestas - LatinIME: Add Bulgarian, Georgian and Ukrainian wordlists
Project name: android_vendor_cm
*Adnan Begovic - cm: Add further verbose messaging for api breaking changes.
*d34d - LLS: Add live lock screen service [3/4]
Project name: cm_platform_sdk
*Roman Birg - LLS: add type
*Roman Birg - cmsdk: add live lock screen settings action intent
*d34d - LLS: Add live lock screen service [1/4]
Project name: android_external_stagefright-plugins
*Ethan Chen - stagefright-plugins: Convert calls to av_free_packet to av_packet_unref
Project name: android_system_core
*Scott Mertz - sched_policy: zero proc_name buffer before populating
Screenshots:
Installation:
1) Boot to recovery, I recommend twrp-3.0.0-1-bacon.img
2) BACKUP YOUR CURRENT SETUP!!!
3) Make a full wipe (Dalvik, Dalvik Cache, System, Data)
4) Flash the ROM
5) Flash Gapps
6) Reboot
Download:
Version 20.0 - 31/03/2016
RaCyanOS-v20.0-bacon
The v20.0 gives fc when opening Kernel Adiutor on settings, please install the FIX or wait for v21.0
RaCyanOS-v20.0-FIX-bacon.zip
Download OPEN GAPPS
- At the moment everything ok, but i'm waiting for your comments.
* Sorry for the English, i'm Portuguese
Space for sale #2
Reaaaaaaaaaaaaaaaaaaaaally nice, love that you included MaxxAudio and CameraNext, data works great, and finally the DPI changer is back in 6.0. Seems like I could daily drive this. Thanks :good:
Work great. No bugs so far.
Will try it over the week. Nice to see another portuguese rom. Abraço
Enviado do meu A0001 através de Tapatalk
Agreed, no issues so far. Trying custom kernels now...
Looks like a cool rom...
Any bluetooth problems?
Witch gapps do you suggest? Pico, mini ???
Can you post radio image, to flash in twrp?
Android System is draining battery. 4% over night
New version, download via OTA our manually.
Will some reupload the radio the link in the op is down
Sent from my A0001 using Tapatalk
---------- Post added at 03:56 PM ---------- Previous post was at 03:55 PM ----------
I'm not getting data and I'm guessing that's why..
Sent from my A0001 using Tapatalk
NUGZZ420 said:
Will some reupload the radio the link in the op is down
Sent from my A0001 using Tapatalk
---------- Post added at 03:56 PM ---------- Previous post was at 03:55 PM ----------
I'm not getting data and I'm guessing that's why..
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
The link is ok, install radio via fastboot.
I just turned data and off and it seems to have fixed itself I'll look tho thanks
Sent from my A0001 using Tapatalk
Just a FYI, on this ROM, I ticked this box to avoid the data disconnect issues.
New version, download via OTA our manually.
Add Xposed, SuperSu and last commits from CM.
Hi Racpu_, thanks for your effort.
Battery is working fine?.... How many hours?
Thanks
Vicente said:
Hi Racpu_, thanks for your effort.
Battery is working fine?.... How many hours?
Thanks
Click to expand...
Click to collapse
Thanks
Yes battery working fine, better be you to try...
Racpu_ said:
Thanks
Yes battery working fine, better be you to try...
Click to expand...
Click to collapse
Bud.. You got xposed in the newest build..?? There have been bootloops coz of it..
geekynoob said:
Bud.. You got xposed in the newest build..?? There have been bootloops coz of it..
Click to expand...
Click to collapse
No bootloops here... working fine.
Racpu_ said:
No bootloops here... working fine.
Click to expand...
Click to collapse
Tried version 1 was really good.. And then switched lol.. I am trying this again.. Just wish some features are now cherry picked.. Thanks for all the hard work..
Using 2.0 ... Everything smooth....battery life not perfect but not bad by any means...will flash 3.0 today
Overall good for a daily driver....
Wondering why not too many users.....
*Welcome to Tipsy*
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a slim based rom with lot of goodies added and awesomeness of RRO Layers. This rom is for people who want to stick to stability+performance accompanied with a slim base. I am the mantainer for this rom. This rom is well tested before release so expect a major stability
Google+ Community (Most of original works and updates of this rom are shared there
Final 5.1.1 Build : tipsy-wt88047-5.1.1.Final_hangover.v2.3--20160715-1939.zip
Proceed further for Marshmallow ROMs.
Code:
[COLOR="Red"][SIZE="4"]Requirement & Instructions[/SIZE][/COLOR]
A device with boot loader unlocked is required
TWRP Recovery Highly Recommended
Copy the Rom.zip to SD card,
Boot to TWRP. Wipe cache, dalvik cache, system, data for bug free experience
Flash rom zip
Flash any 6.0 Gapps ([URL="opengapps.org"]Open Gapps[/URL] recommended)
Boot to system.
Reboot.... and Done
Let the bar Open :P
DOWNLOAD ROM
STAY TIPSY
Kernel Features
FEATURES:
Supports Lollipop Bootloader
Fast Charge
Vibration intensity control
Schedulers - fiops, sioplus, tripndroid, zen
Governors - lionfish, impulse, despair
Hotplugs - mpdecision, State Helper, Mako, MSM
Double-Tap2-Wake
KCAL support
wlan wake locks toggle support
frandom support
fsync on/off support
zram/zsmalloc optimizations
stock Wifi driver, 3.8.22.14
Exfat/NTFS support
GPU slightly overclocked to 465Mhz (100-465Mhz)
CPU unlocked with all frequencies, default max to 1.4Ghz (200Mhz-1.4Ghz)
TCP congestion algorithms enabled
Few more internal optimizations
Sources
TipsyOS
XDA:DevDB Information
TipsyOS, ROM for the Xiaomi Redmi 2
Contributors
premaca
Source Code: https://github.com/TipsyOS
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: AOSP, Slim
Version Information
Status: Stable
Current Stable Version: 4.3
Stable Release Date: 2016-07-19
Current Beta Version: 3.4
Beta Release Date: 2016-03-24
Created 2016-03-24
Last Updated 2016-08-16
Reserved
The downloads are move to GZR official AFH hosting, https://androidfilehost.com/?w=files&flid=61357
ChangeLog
08.16
* Download Tipsy-wt88047-frunk-v4.6-20160816-1542.zip
* source changes and fixes till date
* Kernel based off Jerrica PremierFinale
* mp-decision hot plug is disabled
* MSM hot plug is now default
* f2fs support for data/cache partitions
08.03
* Download Tipsy-wt88047-Vacation-v4.5-20160803-0106.zip
* OMS builds started
* Install substratum and compatible themes
* August security patch
* Android r61
* Statehelper removed, and few changes to kernel
* base changes and bug fixes
07.19
* Download Tipsy-wt88047-Geuze-v4.3-20160719-0358.zip
* Lollipop Blobs are now used for Camera
* Fix for Dark Video on front camera
* WhatsApp group chat force-close fixed
* InCallUi Font reduced, You should be able to see the CallerId Numbers fully
* Kernel rebased to Jerrica REL4.0
* MSM hot plug and Despair Governor
* base changes and bug fixes
07.12
- Download Tipsy-wt88047-Geuze-v4.3-20160712-0450.zip
- Kernel rebased to Jerrica v3.2
- KCAL support added
- android_r52
- base changes and bug fixes
07.02
Download - https://www.androidfilehost.com/?fid=24591000424944053
- Version bumped to 4.3 Geuze
- Kernel rebased to Jerrica
- Source changes and bug fixes
06.10
Download - https://androidfilehost.com/?fid=24580943222146263
- Version bumped to 4.1 Geuze
- GZR Kernel Audiotor
- Slim launcher added (You have choice with Nova too)
- Source changes and bug fixes
- android 6.0.1_r43
05.09
- Version bumped to 3.9 - Vacation
- On-demand proximity sensor state implemented
- dt2w now checks the proximity sensor before waking up the device. No unwanted wakeups in pocket
- Occasional Triple-tap-to-wake requirement is fixed.
- SIO scheduler added
- Vibration intensity control added
- updated to 6.0.1_r43
- Upstream changes and bug fixes
04.25
- Version bumped up to v3.7 Chimay
- UI Overhaul, dexopt
- dt2w in-call detection is corrected
- Vibration Intensity control added
- SIO scheduler added
- Upstream changes and bug fixes
04.08
- v3.5 Judas
- Sensors are fixed
- XDivert settings in Phone App removed, No real use as of now
- Native d2tw support through Settings->Display->Tap to wake
- USB Fast Charge, enabled by default
- Workaround incorporated for Blue Screen Artifacts
- Upstream changes and bug fixes
03.24
- v3.4 Hapkin
- Initial Release
Reserved
Screenshots-
Just checked that my friend @s.sawrav has an unofficial build of Tipsy, have not realized till I posted this. I'm sorry if this disappoints you and let me know if you continue to maintain Tipsy, I will back-off. Absolutely no issues.
Code:
premaca said:
Just checked that my friend @s.sawrav has an unofficial build of Tipsy, have not realized till I posted this. I'm sorry if this disappoints you and let me know if you continue to maintain Tipsy, I will back-off. Absolutely no issues.
Click to expand...
Click to collapse
Well i had issue's and was really pissed off but now that i know that it was a mistake by you and you're even acknowledging it,there's no problem at all,in fact nice work making it official and i already have a lot of ROM's to update anyway,i even wanted for someone to do it,I hadn't updated tipsy after it's initial release due to focussing on other ROM's,i was just upset that you didn't ask knowing that i already had it done before.But no problem now and again Nice work done. :good:
BTW tip for next time,know all the ROM's for our device before you start to work on it.
Tipsy official..??
Wow great work bro..?????
is 3g working on 2nd sim..???
saurabh1234 said:
is 3g working on 2nd sim..???
Click to expand...
Click to collapse
Haven't worked on this Saurabh, may be i will look into this soon.
@premaca Please update buglist if any,like one mentioned above no 3g on second sim,I really want to flash this ROM but with limited data pack I have to be sure of stability.
Thanks in advance.
rohitsonone said:
@premaca Please update buglist if any,like one mentioned above no 3g on second sim,I really want to flash this ROM but with limited data pack I have to be sure of stability.
Thanks in advance.
Click to expand...
Click to collapse
Well most of the custom ROMs have this, it will not be an issue unless you want to use 4g on second sim, shift to Sim1 otherwise.
For other parts, you can flash it as daily driver and no major issues.
Report I will add to the post. Thanks.
@premaca I have just flashed latest build I experienced random reboots during initial setup and then at startup.For now it looks stable.
Yas sensor doesn't get detected,on aosp caf thread it is being reported that ubertc toolchain up and above 4.8 creates problem for detection of yas sensor.
I'm using 2014818 redmi 2 prime,2gb ram variant.
Is there an update for Tesla
@premaca I think there is something wrong with the latest kumajaya source's,the phone reboots when there is an incoming call,happened in my AICP rom too,can you confirm this on TIPSY,if that is the case then i'll be sure it has something to do with the kumajaya's source's.
Rom is good ..
But i dont like it..
No theme provide
Titanium backup not work fc
Gallery fc
More screenshots.. ?
immy28 said:
Rom is good ..
But i dont like it..
No theme provide
Titanium backup not work fc
Gallery fc
Click to expand...
Click to collapse
download layers manager from playstore...and thst will provide you themes...
and for gallery fc use google photos...no fc in that...
immy28 said:
Rom is good ..
But i dont like it..
No theme provide
Titanium backup not work fc
Gallery fc
Click to expand...
Click to collapse
Layers Manager is already included in the ROM, you can use Layers Themes from the Play Store.
I did not see FC on Gallery and TB, will check and fix in the next build.
premaca said:
Layers Manager is already included in the ROM, you can use Layers Themes from the Play Store.
I did not see FC on Gallery and TB, will check and fix in the next build.
Click to expand...
Click to collapse
Ok thanks
immy28 said:
Rom is good ..
But i dont like it..
No theme provide
Titanium backup not work fc
Gallery fc
Click to expand...
Click to collapse
Gallery working here when opened through drawer. there in nova launcher camera app is giving this error just remove that.
Amit_Optimus said:
Gallery working here when opened through drawer. there in nova launcher camera app is giving this error just remove that.
Click to expand...
Click to collapse
Oo. Okay. Do not use the Icons on the Nova Launcher, they come default with the launcher and do not point to the actual implemented apps. Replace those icons with the actual ones in the drawer.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What's AOSP ?
AOSP is Android as Google publish without other modifications. More or less AOSP is the Nexus devices stock rom without gapps.
I add no features and i am not going to add something other.
What's CodeAurora Forums ?
Code Aurora Forum (CAF) is a consortium of companies with projects serving the mobile wireless industry. Software projects it concerns itself with are e.g. Android for MSM, Femto Linux Project, LLVM, MSM WLAN and Linux-MSM. Code Aurora is basically AOSP plus all Qualcomm specific enhancements and optimization.
CREDITS
Men_in_black007
Cyanogenmod
AOSP
CAF----------------------------------------------------------------------------------
Not Working:
Everything is working bro, im sorry you cannot complain
----------------------------------------------------------------------------------
CHANGELOG
08-08 V5:
- updated caf branch to LA.BR.1.2.7_rb1.25
- updated security patch to 05-08
- updated qualcomm gpu drivers
- added prevent accidental wake up (it is not working, i know)
- removed gello browser (takes so much space in the zip)
- removed supersu from automatically flashing
- update cm's snap camera
- added a patch to improve signal
- someone on here mentioned the open gapps issue is related to webview so i added some changes related to that
- new launcher base (SnapdragonLauncher from CAF)
- new music app (SnapdragonMusic from CAF)
- a few other things i already forgot (you can check source)
15-07 V4.1
- fixed bluetooth on d851
- fixed camera FC
- synced kernel to cm
- update gello to v25
- add dt2s on lockscreen
- a few things you dont see.
09-07 V4
- add gello.
- add 4K video recording
- add dt2s on homescreen (just like stock)
- add gestures settings
- extended documentsui (you can now install apk's)
- show 4G icon for LTE
- supersu is flashed automatically and integrated in settings.
- a few things you dont see.
26-06 V3
- native exfat support
- removed tethering icon from launcher
- switched back to cm's stock kernel settings (the battery optimized settings from V2 makes the rom laggy)
- xz compression for kernel
notes:
- switching to another kernel will break exfat support because the exfat driver is in the kernel.
- ask your favourite kernel's developer to look at my sources so he can add exfat support in kernel to.
22-06 V2
ROM:
- build with O3 optimizations and uberTC
- switched to snap camera app
- removed email.apk
- outbound calls notification should be fixed
- google play services fix ( only flash pico or nano or micro gapps )
- fix photo editor fc
- advanced reboot
- hide the buttons section in 'settings'
KERNEL:
- build with O3 optimizations and uberTC
- set intelli_plug as the default hotplug
- set 268000 mhz as the default minimum frequency
- set 'slim' as the default governor
- lots of other additions and improvements from other kernels
17-06 V1
- Initial release
- caf tag LA.BR.1.2.7_rb1.20
----------------------------------------------------------------------------------
INSTALLATION
clean install :
- (Optional) Wipe the data & cache (Backup to make sure not to loose data)
- Flash the ROM zip from the Recovery
- (Optional) Flash the GApps to have the Google Applications (only opengapps micro nano or pico)
- (Optional) Every additional zip you want to flash
- Reboot
update / upgrade :
- (Information) Don't wipe anything unless you want to
- Flash the latest ROM zip from the Recovery
- (Optional) Flash the GApps on first install / upgrade. Not required later, but do update sometimes
- (Optional) Every additional zip you want to flash]
- Wipe cache
- Reboot
----------------------------------------------------------------------------------
DOWNLOADS
ROMS hosted on androidfilehost
Gapps
SUPERSU
GELLO
----------------------------------------------------------------------------------
Q&A - FAQ
Q : Where can I change the Quick Tiles and Status Bar ?
A : Long press the Settings icon in the notifications drawer.
> You will have access to the SystemUI Tuner from Settings now.
----------------------------------------------------------------------------------
XDA:DevDB Information
AOSP-CAF, ROM for the LG G3
Contributors
mistercheese, Men_in_black007
Source Code: http://github.com/aosp-g3
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: v5
Stable Release Date: 2016-07-09
Created 2016-06-17
Last Updated 2016-08-09
title says D85x but there is not for D851 yet
aaanadie said:
title says D85x but there is not for D851 yet
Click to expand...
Click to collapse
it will be there soon. its now compiling for d852.
others will follow this weekend
First pure aosp for lg g3? Cool
nice!! what´s working, and not?, maybe some screens?
Can give changelog? Whats inside the rom?
Enviado do meu LG-D855 através de Tapatalk
Rom boot fine, pretty clean and smooth as expected.. i flashed gapps from opengapps (stock package) but i cant login, google play services give me fc, ill try with suggested gapps.. a strange settings found in Settings, Buttons, it seems made for phones with buttons backlight so is useless here and should be removed to keep AOSP clean i think.
ps. if you can add this line
Code:
<string name="reboot_title">Reiniciar</string>
<string name="reboot_confirm">El dispositivo se reiniciará.</string>
<string name="reboot_progress">Reiniciando…</string>
to all spanish strings in frameworks_base/core/... will be apreciated. :fingers-crossed:
Build for vs985?
Sent from my LG-VS985 using XDA-Developers mobile app
Prowler said:
Rom boot fine, pretty clean and smooth as expected.. i flashed gapps from opengapps (stock package) but i cant login, google play services give me fc, ill try with suggested gapps.. a strange settings found in Settings, Buttons, it seems made for phones with buttons backlight so is useless here and should be removed to keep AOSP clean i think.
ps. if you can add this line
Code:
<string name="reboot_reboot">Reiniciar</string>
to all spanish strings in frameworks_base/core/... will be apreciated. :fingers-crossed:
Click to expand...
Click to collapse
i am not going to add anything extra
aaanadie said:
title says D85x but there is not for D851 yet
Click to expand...
Click to collapse
it should be there now
wutangkillabee said:
Build for vs985?
Sent from my LG-VS985 using XDA-Developers mobile app
Click to expand...
Click to collapse
It should be there now
HI. Please add d850 to the list
mistercheese said:
i am not going to add anything extra
Click to expand...
Click to collapse
this isnt a extra thing, its just a spanish translation of "Reboot" option in power menu.
@mistercheese, are the CAF optimizations only applied to the kernel, or to the ROM itself too? I'd install this ROM with aCC kernel, but if the optimizations are only in kernel's code, this makes no sense, 'cause I'll change it and so lose all the optimizations.
edoardotavecchio said:
@mistercheese, are the CAF optimizations only applied to the kernel, or to the ROM itself too? I'd install this ROM with aCC kernel, but if the optimizations are only in kernel's code, this makes no sense.
Click to expand...
Click to collapse
The kernel is just cm's CAF kernel and the optimizations is in the ROM. So flashing acc kernel can be a huge difference. I am also working on a kernel but that takes time.
Sent from my LG-D855 using XDA-Developers mobile app
mistercheese said:
The kernel is just cm's CAF kernel and the optimizations is in the ROM. So flashing acc kernel can be a huge difference. I am also working on a kernel but that takes time.
Sent from my LG-D855 using XDA-Developers mobile app
Click to expand...
Click to collapse
All right. If I've understood that right, the ROM itself is optimized too. So, flashing it with another kernel doesn't mean that I'll lose alle the optimizations made by CAF. Thanks, I'll install this rom right now.
Ls990? Would like to try it out.
Please fix the Bug with the OpenGapps compatible issue ... i cannot sign in the Google Account ..it's always FC! Google Play Service FC!
Device: D855
huzefaonline said:
HI. Please add d850 to the list
Click to expand...
Click to collapse
it should be there now
jamal2367 said:
Please fix the Bug with the OpenGapps compatible issue ... i cannot sign in the Google Account ..it's always FC! Google Play Service FC!
Device: D855
Click to expand...
Click to collapse
i dont have any problems