Patch for p768 CM11 Fix Cam - LG Optimus L9 P760, P765, P768, P769

((Updated 04 March 2014))
Here is the fix to patch p760_CM11 to P768 and p778
what its do?
1) Remove p760 camera module
2) install p768/p778 camera module
3) Remove NFC Modules
4) Replace the camera and gallery apk's to new improved camera and gallery apk
Requeriments:
1) artas182x.tk/?page_id=287
:laugh::good:

puntoazul said:
Here is the fix to patch p760_CM11 to P768
what its do?
1) Remove p760 camera module
2) install p768 camera module
3) Remove NFC Modules
4) Replace the camera and gallery apk's to new improved camera and gallery apk
Requeriments:
1) artas182x.tk/?page_id=287
:laugh::good:
Click to expand...
Click to collapse
Does this change the device name to the correct P768 or does it still identify as P760?
Im going to wait for @artit to return, he said he was working on CM11 for P768's, it has been a while though

donk165 said:
Does this change the device name to the correct P768 or does it still identify as P760?
Im going to wait for @artit to return, he said he was working on CM11 for P768's, it has been a while though
Click to expand...
Click to collapse
I'm sorry to tell you that my P768 phone is dead. My brother restart it after no signal and it didn't boot up again. I try to recovery it but no response from phone. It can only boot into fastboot but cannot flash u-boot/x-loader. My warranty only end 15 days ago and LG service center told me that it need to replace a new board which cost me about half a price of that phone now.
I suggest that you patch a good P760 rom to work with P768. I think we can change device name within build.prop.
After I have some problems with both Samsung & LG phone, I'm not sure which brand I should get for my next phone. But I'm using LG Optimus G now and I brought it because of local shop clearance sales.

donk165 said:
Does this change the device name to the correct P768 or does it still identify as P760?
Im going to wait for @artit to return, he said he was working on CM11 for P768's, it has been a while though
Click to expand...
Click to collapse
No... This patch only fix the camera modules and replace and improved camera/gallery apk for now... In next update im add the possibility to change the name and properties to the phone said p768in replacement of p760
---------------
UDADATE: Sorry... I've been doing some works to change Device ID, specifically modifying build.prop file, and renaming some ".so" file related to sound modules from p760 to p768 names only... but after modding, it stuck on lg logo when reboot. I think it's aboout some kind of kernel detection...
I have'nt problem to take my device ID as p760 if it work well

artit said:
I'm sorry to tell you that my P768 phone is dead. My brother restart it after no signal and it didn't boot up again. I try to recovery it but no response from phone. It can only boot into fastboot but cannot flash u-boot/x-loader. My warranty only end 15 days ago and LG service center told me that it need to replace a new board which cost me about half a price of that phone now.
I suggest that you patch a good P760 rom to work with P768. I think we can change device name within build.prop.
After I have some problems with both Samsung & LG phone, I'm not sure which brand I should get for my next phone. But I'm using LG Optimus G now and I brought it because of local shop clearance sales.
Click to expand...
Click to collapse
Very bad to hear that :crying:
are You try to enter in fastboot mode using Lelus Method ??? with this method you can flash u-boot/x-loader in "force mode" using fastboot commands. I hope it can help

artit said:
I'm sorry to tell you that my P768 phone is dead. My brother restart it after no signal and it didn't boot up again. I try to recovery it but no response from phone. It can only boot into fastboot but cannot flash u-boot/x-loader. My warranty only end 15 days ago and LG service center told me that it need to replace a new board which cost me about half a price of that phone now.
I suggest that you patch a good P760 rom to work with P768. I think we can change device name within build.prop.
After I have some problems with both Samsung & LG phone, I'm not sure which brand I should get for my next phone. But I'm using LG Optimus G now and I brought it because of local shop clearance sales.
Click to expand...
Click to collapse
This news sad to hear. I hope you have more luck with your Optimus G, I've been looking at the Sony Xperia SP as my next phone. Gotta save for a while though. Its not much of an upgrade but it is 4g ready which is nice!
I'm going to stick with CM10.1 I think, everything seemed to work best while using that.
Sent from my LG-P768 using xda app-developers app

Camera force close

DarwinDeLaRosa said:
Camera force close
Click to expand...
Click to collapse
Please try this beta fix and tellme if it work....

puntoazul said:
Please try this beta fix and tellme if it work....
Click to expand...
Click to collapse
Thanks man worked for me
778g

Fix has been updated... see frist post

((Updated 04 March 2014))
Here is the fix to patch p760_CM11 to P768
what its do?
1) Remove p760 camera module
2) install p768 camera module
3) Remove NFC Modules
4) Replace the camera and gallery apk's to new improved camera and gallery apk
Requeriments:
1) artas182x.tk/?page_id=287
See first post for attachment

I'm sorry but could you tell me, what's the difference between this and artit's fix?

Basically the camera apk...

Thank you very much
I have installed your latest patch, after I changed VM to ART, it stopped working. It sends an alert. "Lamentablemente, la aplicación Snap se detuvo"

L9User11 said:
I have installed your latest patch, after I changed VM to ART, it stopped working. It sends an alert. "Lamentablemente, la aplicación Snap se detuvo"
Click to expand...
Click to collapse
Remember, in cyanogenmod ART is experimental... not all applications works on ART, including snap

Changelog of the latest release? what did you change?
Sent from my LG-P768 using XDA Premium 4 mobile app

I am working on a CM11 build for P768.

dhiru1602 said:
I am working on a CM11 build for P768.
Click to expand...
Click to collapse
Thank you so much for your effort, patiently waiting for your work
Sent from my LG-P768 using XDA Premium 4 mobile app

Thanks
puntoazul said:
((Updated 04 March 2014))
Here is the fix to patch p760_CM11 to P768 and p778
what its do?
1) Remove p760 camera module
2) install p768/p778 camera module
3) Remove NFC Modules
4) Replace the camera and gallery apk's to new improved camera and gallery apk
Requeriments:
1) artas182x.tk/?page_id=287
:laugh::good:
Click to expand...
Click to collapse
Hola amigo, yo tengo un lg p768, pero ninguno de tus parches me ha servido hasta el momento, siempre la apk que utilizas se me cierra o si logro abrila, al utilizar la aplicacion se cierra. Podrias en un futuro usar una aplicacion diferente, o utilizar otro driver para la camara?. Gracias.

dhiru1602 said:
I am working on a CM11 build for P768.
Click to expand...
Click to collapse
Do we have to update the baseband of we want to install the Cyanogenmod by artas? If so then how?
Sent from my LG-P768 with Cyanogenmod

Related

F320K testers needed

A few F320K users asked me to port THIS ROM to their device. Seems there are some issues...I will get them straight in due time.
Thanks for testing...
I'm getting my F320k in about 3/4 days. So i'll try it as soon as i get it.
AndroidUser00110001 said:
A few F320K users asked me to port THIS ROM to their device. I built a version that should work. I do not have a 320K to test with. So if you want to test for me then HERE is the download link
Thanks!
Click to expand...
Click to collapse
Here i am .
F320K Old tester....
your work in download , bro !
Just a heads up...I am not even sure if this will boot or if wifi and all the radios will work. So let me know what happens so I can fix
wolfgart said:
Here i am .
F320K Old tester....
your work in download , bro !
Click to expand...
Click to collapse
hey Bro . So Flashed (and before to flash it i've made a Wipe Factory...from my TWRP)
but it bootloops at LG logo .
Something wrong inside....
During flashing , all messages fine but last line it says : E: unable to mount System
so , i upload you my aboot.img (from last SW release F320K11c)
here
Tell me if you need other stuff/info/files
wolfgart said:
hey Bro . So Flashed (and before to flash it i've made a Wipe Factory...from my TWRP)
but it bootloops at LG logo .
Something wrong inside....
During flashing , all messages fine but last line it says : E: unable to mount System
so , i upload you my aboot.img (from last SW release F320K11c)
here
Tell me if you need other stuff/info/files
Click to expand...
Click to collapse
OK I will get to it later...right now I am working on PA ROM for D800
Thanks for your work Korean models need some love too.I think it will work in any F320 version,i dont see why not when i flashed the F320K firmware directly to my F320S model.Does this rom includes a custom kernel?This is what i miss most cause or UV....
EDIT: I saw it doesnt,i hope someone will make a custom a kernel for our phones too.
I can test too, I have a F320K
Sent from my SM-N900T using XDA Premium 4 mobile app
Count me in:highfive:
Im a F320 user and will provide support when needed to assist in the development of the Korean devices..
AndroidUser00110001 said:
OK I will get to it later...right now I am working on PA ROM for D800
Click to expand...
Click to collapse
Would you please port this for the 320KSL variants as well? It seems like every other variant is getting AOSP love but the Korean sets =(
hamisgood said:
Would you please port this for the 320KSL variants as well? It seems like every other variant is getting AOSP love but the Korean sets =(
Click to expand...
Click to collapse
This development would be greatly appreciated by those of us with Korean version handsets and I hope to see it soon.
Cheers!!
I dont think that it needs porting.....the S/L is the same model (you can see it when you remove the battery,the model is F320S/L).And as i said already i flashed the K model firmware to my F320s with no problems at all.
woof123 said:
I dont think that it needs porting.....the S/L is the same model (you can see it when you remove the battery,the model is F320S/L).And as i said already i flashed the K model firmware to my F320s with no problems at all.
Click to expand...
Click to collapse
It is fairly easy to convert F320L to F320K... I have done this and have a working CMW Recovery 6.0.4.4 (F320K based) running like butter on my F320L..
Any working F320 K or L Cyanogenmod would be a dream at the moment as I am rooted and have a recovery installed and am ready to use the roms as and when they eventually arrive..
I can test it on my F320L. Will report back how it goes.
jody04c said:
It is fairly easy to convert F320L to F320K... I have done this and have a working CMW Recovery 6.0.4.4 (F320K based) running like butter on my F320L..
Any working F320 K or L Cyanogenmod would be a dream at the moment as I am rooted and have a recovery installed and am ready to use the roms as and when they eventually arrive..
Click to expand...
Click to collapse
I am "patiently" waiting for a AOSP rom for the 320 series. Ok I lied I am kinda impatient D=
But still I hope that one comes eventually. CM/Carbon/PA for our variants would really make a good Christmas present!
Lets hope that the DEV has some time soon to progress with AOSP on the F320 variant devices...
Thankfully the Xposed Mods addon working well to fill the gap until then..
Need a tester for aosp Korean g2
Sent from my LG Optimus G using Tapatalk
houstonn said:
Need a tester for aosp Korean g2
Sent from my LG Optimus G using Tapatalk
Click to expand...
Click to collapse
Here i am
Pm me
houstonn said:
Need a tester for aosp Korean g2
Sent from my LG Optimus G using Tapatalk
Click to expand...
Click to collapse
Count me in buddy. Im all yours
PM at any time,

[ROM][D855] get a taste of aosp...

Hi my friend... i really want to see how aosp based rom will run on our phone
This is a simply port of devianxone rom builded by $droyds$ for the tmo version with a kernel compiled by me from intervirgilium github.
1- set up the TWRP
2- reboot in recovery ( will start fastboot ) and boot into recovery;
3- make a backup;
4- factory reset;
5- install the rom zip from sdcard ( where you must had copy the rom );
6- reboot recovery ( so you will be again in the fastboot mode);
7- do this:
Code:
fastboot boot boot.img
8- enjoy the speed
all credits go to @$Droyds$ for the rom and to intervigilium for the kernel source
DONATE to @$Droyds$ for his work
Download the ROM
Download the kernel
The rom is still bugged so don't report anything, it's just for testing purpose.
O.O don't you need the bootloader unlocked ?
Hey! is it for D855 or F400x?
CheesyNutz said:
O.O don't you need the bootloader unlocked ?
Click to expand...
Click to collapse
yes... this is why you need fastboot to boot
Kniazkoff said:
Hey! is it for D855 or F400x?
Click to expand...
Click to collapse
D855 only
Would be nice to have the recovery package.
Verstuurd vanaf mijn LG-D855 met Tapatalk
I never us fastboot,but i want to flash this rom and kernel.is it a dangerous,can i messed up something?
Skin1980 said:
yes... this is why you need fastboot to boot
D855 only
Click to expand...
Click to collapse
Thanks for providing this rom for the G3 community.
For the sheer sake of security, it would be better to add to the title the model this rom is intended to.
This way there will be les confusion among the users, particularly those who don't read the entire thread.
Thanks
juliocesar55 said:
Thanks for providing this rom for the G3 community.
For the sheer sake of security, it would be better to add to the title the model this rom is intended to.
This way there will be les confusion among the users, particularly those who don't read the entire thread.
Thanks
Click to expand...
Click to collapse
you are right... i'm going to do it
oska3 said:
I never us fastboot,but i want to flash this rom and kernel.is it a dangerous,can i messed up something?
Click to expand...
Click to collapse
If you follow the guide on the TWRP thread i linked you can make a backup and, after the test, restore everything.
Wow ?
@Skin1980 just copy my thread and change for your device.. Be sure to be as detailed as you can on install.. We need to talk cause if you can explain to me what you changed for d855 and this is a legitimate flash method I can source it and get some support out for you.. Pm me your hangout info and I'll hit you up after I wake up..
You'll need to re port tonight I've got a lot of fixes in the next build.
$droyd$ said:
@Skin1980 just copy my thread and change for your device.. Be sure to be as detailed as you can on install.. We need to talk cause if you can explain to me what you changed for d855 and this is a legitimate flash method I can source it and get some support out for you.. Pm me your hangout info and I'll hit you up after I wake up..
You'll need to re port tonight I've got a lot of fixes in the next build.
Click to expand...
Click to collapse
Could you upload the package or mirror it
Verstuurd vanaf mijn LG-D855 met Tapatalk
$droyd$ said:
@Skin1980 just copy my thread and change for your device.. Be sure to be as detailed as you can on install.. We need to talk cause if you can explain to me what you changed for d855 and this is a legitimate flash method I can source it and get some support out for you.. Pm me your hangout info and I'll hit you up after I wake up..
You'll need to re port tonight I've got a lot of fixes in the next build.
Click to expand...
Click to collapse
I have issue with wifi... when i fix it i will contact you.
Skin1980 said:
I have issue with wifi... when i fix it i will contact you.
Click to expand...
Click to collapse
you have it instaled in a d855 international with bootloader? or t-mobile free bootloader?
limdnas said:
you have it instaled in a d855 international with bootloader? or t-mobile free bootloader?
Click to expand...
Click to collapse
Locked bootloader
Sent from my LG-D855 using XDA Free mobile app
"You'll need to re port tonight I've got a lot of fixes in the next build."
waiting patiently... will surely try the next build
way to my G3…. waiting to open…. splash screen now….
Worked but, touchscreen stopped working, and then I pull off battery, and now I can't boot to recovery. :x
EDIT: boot certification verify, error ;x
EDIT2: Fixed entering in Recovery Mode ( Volume DOWN + Power Button, since LG Logo appears, than release and press anothertime until recovery), so can bootup.
All working, hope fixing the wifi problem, and making it as taste as CM11 with luncher and other apps.
and we need to flash Gapps.
WiFi.. That's an easy fix.. I'll pm you how..

Camera not focusing

Hey there. I've had this device for a couple a days and did all the tasks an android nerd usually does (rooting and installing mods). I had installed gapps stock via twrp and I've noticed that the front facing camera doesn't focus, the pictures come out kinda blurry. I also tried to avoid installing the google camera using gapps aroma but still got the same issue. Could this issue be fixed? Would installing gapps individually without using a .zip file make a difference?
sexxualization said:
Hey there. I've had this device for a couple a days and did all the tasks an android nerd usually does (rooting and installing mods). I had installed gapps stock via twrp and I've noticed that the front facing camera doesn't focus, the pictures come out kinda blurry. I also tried to avoid installing the google camera using gapps aroma but still got the same issue. Could this issue be fixed? Would installing gapps individually without using a .zip file make a difference?
Click to expand...
Click to collapse
Can u tell us what model n firmware ver u have?
mekar07 said:
Can u tell us what model n firmware ver u have?
Click to expand...
Click to collapse
it's 36.0.A.2.109, model number F3211
sexxualization said:
it's 36.0.A.2.109, model number F3211
Click to expand...
Click to collapse
I got same issue but in f3216..the problem solved when u format stock fw but you lost root..
New kernel is ready for XA Ultra, now I need the "boot_S1****.sin" from the last firmware on single and dual sim to extract the Ramdisk. I will not download firmwares just for that. Anyone can send me the files in PM?
rrvuhpg said:
New kernel is ready for XA Ultra, now I need the "boot_S1****.sin" from the last firmware on single and dual sim to extract the Ramdisk. I will not download firmwares just for that. Anyone can send me the files in PM?
Click to expand...
Click to collapse
from xa ultra (F3216) fw 36.0.B.2.109
mekar07 said:
from xa ultra (F3216) fw 36.0.B.2.109
Click to expand...
Click to collapse
Can I install it on my F3211?
sexxualization said:
Can I install it on my F3211?
Click to expand...
Click to collapse
No for two reasons, the first it's for the dual sim devices. The second it's a "sin" file and useless alone.
I asked this file to update the boot.img with the last kernel and probably solve the focus problem.
Now I need the same file from a firmware like the one for your phone (single sim)
I will release the new boot for the dual sim in one or two days.
rrvuhpg said:
No for two reasons, the first it's for the dual sim devices. The second it's a "sin" file and useless alone.
I asked this file to update the boot.img with the last kernel and probably solve the focus problem.
Now I need the same file from a firmware like the one for your phone (single sim)
I will release the new boot for the dual sim in one or two days.
Click to expand...
Click to collapse
If that could fix my focusing issue i'd be so thankful gosh, otherwise i'll have go to back to stock even tho i hate it
mekar07 said:
from xa ultra (F3216) fw 36.0.B.2.109
Click to expand...
Click to collapse
Thank you!
Just released new boot for the XA Ultra Dual Sim, new thread created for all future releases:
http://forum.xda-developers.com/xa-...12-f3216-stock-kernels-built-sources-t3527762
rrvuhpg said:
Thank you!
Just released new boot for the XA Ultra Dual Sim, new thread created for all future releases:
http://forum.xda-developers.com/xa-...12-f3216-stock-kernels-built-sources-t3527762
Click to expand...
Click to collapse
Thank you so much rrvuhpg!!:good:
rrvuhpg said:
Thank you!
Just released new boot for the XA Ultra Dual Sim, new thread created for all future releases:
http://forum.xda-developers.com/xa-...12-f3216-stock-kernels-built-sources-t3527762[/QUOTE
Work for f3213?
Click to expand...
Click to collapse
ayuda
hola buenas tardes yo abri el gestor de arranque de mi sony xperia xa ultra y lo hice root mediante twrp pero ahora mi camara frontal no enfoca se ve borrosa y hay veces que se cierra sola y me manda mensaje de se a detenido la camara mi modelo es el sony xperia xa ultra F3213 alguien que me pueda ayudar a solucionarlo se lo agardeceria mucho
emmanuelcampuzano6 said:
hola buenas tardes yo abri el gestor de arranque de mi sony xperia xa ultra y lo hice root mediante twrp pero ahora mi camara frontal no enfoca se ve borrosa y hay veces que se cierra sola y me manda mensaje de se a detenido la camara mi modelo es el sony xperia xa ultra F3213 alguien que me pueda ayudar a solucionarlo se lo agardeceria mucho
Click to expand...
Click to collapse
Write in English please, if you can't use Google translate at least.
rrvuhpg said:
Thank you!
Just released new boot for the XA Ultra Dual Sim, new thread created for all future releases:
http://forum.xda-developers.com/xa-...12-f3216-stock-kernels-built-sources-t3527762
Click to expand...
Click to collapse
I had the same problem with the front camera not focusing after installing Xposed and rooting. Flashing the previous boot image solved my problem, now the front camera focuses.
There is still an issue with the new kernel, the screen never shuts off and the brightness is always at its maximum
Yooooomi said:
I had the same problem with the front camera not focusing after installing Xposed and rooting. Flashing the previous boot image solved my problem, now the front camera focuses.
There is still an issue with the new kernel, the screen never shuts off and the brightness is always at its maximum
Click to expand...
Click to collapse
I'm really torn in between, could you please tell what have you gained from the new kernel ?
I wanna know if it's worth it.
Talal Tango said:
I'm really torn in between, could you please tell what have you gained from the new kernel ?
I wanna know if it's worth it.
Click to expand...
Click to collapse
The new kernel seems buggy af, to be honest I'm about to try to downgrade to .111 I'll keep in touch if it works. Changing the kernel to the new is not worth imo to answer your question
Talal Tango said:
I'm really torn in between, could you please tell what have you gained from the new kernel ?
I wanna know if it's worth it.
Click to expand...
Click to collapse
You could try this : https://forum.xda-developers.com/xa-ultra/how-to/flashing-xa-ultra-flashtool-t3551319 to downgrade to .111 and then root your phone
Yooooomi said:
You could try this : https://forum.xda-developers.com/xa-ultra/how-to/flashing-xa-ultra-flashtool-t3551319 to downgrade to .111 and then root your phone
Click to expand...
Click to collapse
I really don't need to root the phone but I might as well do it for the heck of it
But all I'm concerned about is the camera quality, low light situations and post processing.
If there's a certain fix to that then I'll root my phone straight away. Cuz let's face it, most of us bought the phone for its camera quality, and sure as hell not for its limited performance.
Talal Tango said:
I really don't need to root the phone but I might as well do it for the heck of it
But all I'm concerned about is the camera quality, low light situations and post processing.
If there's a certain fix to that then I'll root my phone straight away. Cuz let's face it, most of us bought the phone for its camera quality, and sure as hell not for its limited performance.
Click to expand...
Click to collapse
Downgrade it or not to .111 (which seems more stable) root it or not, but if you want to recover camera quality just flash the DRM fix mod here : https://forum.xda-developers.com/crossdevice-dev/sony/xperia-z1-z2-z3-series-devices-drm-t2930672 be sure to download the Z3+ version and it'll sulfate DRM keys that allow noise cancelling, Bravia stuff etc...

[ROM][TW] Super WizCyanV5 by JASONRR [Installation For I545] [Update 11-12-17]

Hello everyone, today I'm going to teach you how to install this incredible rom created by @JASONRR thank you for your effort, The steps were performed in the OF1 version and (Flashfire v.0.53) version 0.55.1 has problems.
FLASHFIRE INSTALL INSTRUCTIONS (OF1 BOOTLOADER USERS):
REQUIRED FILES:
WizCyanV5:https://mega.nz/#F!JhBziQ7R!Qsga2QWZRIPIwzsKx-OBbw both zip are in the mega link.
WiFi Fix:https://www.androidfilehost.com/?fid=24269982086999420 ( @klabit87)
Kernel OF1:https://www.androidfilehost.com/?fid=24052804347820945
Flashfire v.0.53: https://www.dropbox.com/s/9vmp7uipkepknzr/FlashFire v0.53 Final [Pro].apk?dl=0
INSTALLATION:
1)Install flashfire v.0.53
2)Open Flashfire and hit the "+" button and select Wipe (Select System Data, 3rd Party Apps, Dalvik and Cache)
3)Hit the "+" button and select "Flash ZIP or OTA"
4)Add Rom WizCyan S6/S7
5)Add WiFi Fix
6)Add WizCyan ADDS S6/S7
7)Hit the "+" button and select "Flash Firmware Pack" and Add "Kernel OF1"
8)Press thunder icon and start installation
TIPS FOR THE INSTALLATION
Leave "Auto-Mount" leave it marked not uncheck.
Set the screen time in 10 minutes so it will not turn off when installing.
In WizCyan Adds try to place what you need do not put things over.
the order of the files can't change position doing so it can be moved only held down the file and colocándole in the order presented below
WIPES
ROM
WIFI FIX
KERNEL
ADDS
Well these are the steps I hope will serve you all again thanks to @JASONRR for the rom and @klabit87 for the wifi fix I will leave some captures to see that it is installed below
Screenshot
SMALL UPDATE TO FIX BUGS
https://mega.nz/#!hgJSwJpZ!UIGEao1QzqwgGDvfUBnmNl75TlQ4Xl_E_wUePfNDm30
This is the developer link to follow in your steps:
http://forum.xda-developers.com/showthread.php?t=3259562
Xposed if you want to install it get it here:
http://forum.xda-developers.com/showthread.php?t=3455992
Testing this out right now! I'm so happy people are still doing roms for this phone! Even with the stupid bootloader locked. I'll let you know how it works!
This is HANDS DOWN the BEST Touchwiz based rom EVER! Everything is so smooth, and fast. And the ONLY rom for the S4 where Viper4Android works! The only thing I didn't do was check "Auto Mount". I left that unchecked. Everything took about 10 minutes. My S4 feels like a brand new phone. @JASONRR
Congrats dude! Seriously, you did one hell of a job!!
it should be noted that the addons package is entirely optional you don't need to flash it and I don't recommend using very large aroma installers with flashfire(too much memory consumption for the s4 can lead to crashes and possbile soft bricking),the s4 can't handle the bloat of all the extra samsung garbage anyway
---------- Post added at 07:00 PM ---------- Previous post was at 06:01 PM ----------
if you are installing on OC1 the process is the same just use the OC1 kernel.tar.md5 found here: https://www.androidfilehost.com/?fid=24052804347820944
and the OC1 wifi fix from here https://www.androidfilehost.com/?fid=23991606952597069
you do not need to download or flash the addons on pack it is optional just beware that the themes settings menu will FC without it but at a little over 1GB of ram free keeping it minimal its worth it
remember the flash order should always be
WIPE
ROM
FIRMWARE (OC1/OF1)
WIFIFIX
KERNEL
Can we confirm that data connects? How would this work on an MDK bootloader? I tried with AIO kernel (since not flashing kernel resulted in yellow triangle.) I got it to boot, but got no data. Appreciate any help, thanks.
----Sent from my phone----
meany said:
Can we confirm that data connects? How would this work on an MDK bootloader? I tried with AIO kernel (since not flashing kernel resulted in yellow triangle.) I got it to boot, but got no data. Appreciate any help, thanks.
----Sent from my phone----
Click to expand...
Click to collapse
Yes working data connect what I do not know if the mdk bootloader works
I see working wifi, but don't see working 3g/LTE. That's what I'm wondering. Any other thoughts on getting it working on mdk bootloader from anyone?
----Sent from my phone----
meany said:
I see working wifi, but don't see working 3g/LTE. That's what I'm wondering. Any other thoughts on getting it working on mdk bootloader from anyone?
----Sent from my phone----
Click to expand...
Click to collapse
Yes data mobile work very good and not know how do work in bootloader mdk as few have the bootloader
Sent from my SM-A9000 using XDA-Developers Legacy app
I take it this cannot be installed via safe strap eh?
Sent from my SCH-I545 using Tapatalk
dasmooveone said:
I take it this cannot be installed via safe strap eh?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
I could not tell you but I think if you use OC1 firmware and OC1 flashable kernel for safestrep would work
It's a theory I would not know if it would work but you can test
Sent from my SM-A9000 using XDA-Developers Legacy app
Hi OP. Thanks for making available the best rom for my vz s4 without question. BUT, after about an hour's usage, mobile data stops working and I can't get it back. Using OF1. So weird because voice/data/texting works perfectly until mobile data crashes. Even after toggling airplane mode and rebooting I can't get it back. Might it be an APN problem? I'd love to keep using this rom but can't w/o 4g.
CrazyCram said:
Hi OP. Thanks for making available the best rom for my vz s4 without question. BUT, after about an hour's usage, mobile data stops working and I can't get it back. Using OF1. So weird because voice/data/texting works perfectly until mobile data crashes. Even after toggling airplane mode and rebooting I can't get it back. Might it be an APN problem? I'd love to keep using this rom but can't w/o 4g.
Click to expand...
Click to collapse
May be it's APN problems since I'm not presented with that error
I'm thinking that the method of install should work with any snapdragon S4 Touchwiz 5.0.2 rom from the international S4 forums.
I haven't tried it, has anyone done deep exploring with FlashFire? Or see A reason to object?
CrazyJ36 said:
I'm thinking that the method of install should work with any snapdragon S4 Touchwiz 5.0.2 rom from the international S4 forums.
I haven't tried it, has anyone done deep exploring with FlashFire? Or see A reason to object?
Click to expand...
Click to collapse
Yes it works in all variants of S4 snapdragon my model is i337 and working a the perfection utility this method for mi variant
carlosbalbuena_ said:
Yes it works in all variants of S4 snapdragon my model is i337 and working a the perfection utility this method for mi variant
Click to expand...
Click to collapse
Thanks for your response, I'm making sure my previous post was understood...
I was wondering if, using this method shared by you, it would be possible to install ANY or EVERY one of the available S4 5.0.2 Touchwiz Snapdragon roms from: https://forum.xda-developers.com/galaxy-s4/i9505-develop onto the Verizon S4 with FlashFire.
Thanks for clarifying.
CrazyJ36 said:
Thanks for your response, I'm making sure my previous post was understood...
I was wondering if, using this method shared by you, it would be possible to install ANY or EVERY one of the available S4 5.0.2 Touchwiz Snapdragon roms from: https://forum.xda-developers.com/galaxy-s4/i9505-develop onto the Verizon S4 with FlashFire.
Thanks for clarifying.
Click to expand...
Click to collapse
Aaah ok sorry my english is not very good to make you sincere you can only try this the others have not had time to try them but if you like you can try and post here so update the post so others can try
Enviado desde mi SGH-I337 mediante la aplicación XDA-Developers Legacy
carlosbalbuena_ said:
View attachment 4032494
Yes working data connect what I do not know if the mdk bootloader works
Click to expand...
Click to collapse
Where are you from? I'm from El Salvador and the mobile network doenst works... lo encendía sólo como 2 segundos y se apagaban, la señal de mi red
RodrySmoke said:
Where are you from? I'm from El Salvador and the mobile network doenst works... lo encendía sólo como 2 segundos y se apagaban, la señal de mi red
Click to expand...
Click to collapse
I am Dominican Republic and speaking spanish as you, You deactivated notify diagnosis?
Enviado desde mi SGH-I337 mediante la aplicación XDA-Developers Legacy

Flyme 7.0.1.0G Port From Doogee Y6

I'm ported FlyMe 7 to xa ultra, and need some help from community
Bugs:
Modem not working
Camera (in clear port work, but i broke them if port to be final condition i'll fix)
Sound (Fix, but sound work with some bugs, idk how to describe, it needs to be heard)
Battery (Fix)
NFC
Screens in description
It's test build, and idk how to fix that bugs, i have already tried almost everything...
First loading take a 5mins or more
DOWNLOAD
Finally some light in the tunnel! I will try and make time to tinker with this tonight
Jokerank-4PDA said:
I'm ported FlyMe 7 to xa ultra, and need some help from community
Bugs:
Modem not working
Camera (in clear port work, but i broke them if port to be final condition i'll fix)
Sound (Fix, but sound work with some bugs, idk how to describe, it needs to be heard)
Battery (Fix)
NFC
Screens in description
It's test build, and idk how to fix that bugs, i have already tried almost everything...
First loading take a 5mins or more
DOWNLOAD
Click to expand...
Click to collapse
Awesome ??
OK so I tried it twice, it does work with the aforementioned bugs. However, after going back to stock it doesn't reboot properly. It will go into twrp every time and I have to go into "reboot" then "bootloader" for it to actually boot my f3213. This is after a full reflash, boot.img, recovery.img factory reset etc...
appleknight said:
OK so I tried it twice, it does work with the aforementioned bugs. However, after going back to stock it doesn't reboot properly. It will go into twrp every time and I have to go into "reboot" then "bootloader" for it to actually boot my f3213. This is after a full reflash, boot.img, recovery.img factory reset etc...
Click to expand...
Click to collapse
Need a have a full twrp backup, with additional files: cache,boot,data,protect_s,protect_f and others.. Full backup of system. After a full restore i not have any problems with my telephone
Jokerank-4PDA said:
Need a have a full twrp backup, with additional files: cache,boot,data,protect_s,protect_f and others.. Full backup of system. After a full restore i not have any problems with my telephone
Click to expand...
Click to collapse
The phone works fine otherwise, I almost never reboot so it's really not a problem, just another bug to point out
What about porting lineage 13 from the y6?
appleknight said:
What about porting lineage 13 from the y6?
Click to expand...
Click to collapse
I'm now have a CM13 (Port from Xperia XA) If u want i upload him, but bug same on XA, SIM and other. I'll try port lineage 14.1 but not try 13 14.1 not working for me
I'll give it a go for sure. I'm more familiar with porting vanilla android so if ya share what ya got hopefully I can find time by the weekend to try and help get it running
appleknight said:
I'll give it a go for sure. I'm more familiar with porting vanilla android so if ya share what ya got hopefully I can find time by the weekend to try and help get it running
Click to expand...
Click to collapse
https://forum.xda-developers.com/xa-ultra/development/cm13-port-xperia-xa-t3840947
Jokerank-4PDA said:
I'm ported FlyMe 7 to xa ultra, and need some help from community
Bugs:
Modem not working
Camera (in clear port work, but i broke them if port to be final condition i'll fix)
Sound (Fix, but sound work with some bugs, idk how to describe, it needs to be heard)
Battery (Fix)
NFC
Screens in description
It's test build, and idk how to fix that bugs, i have already tried almost everything...
First loading take a 5mins or more
DOWNLOAD
Click to expand...
Click to collapse
Hello. I tested the rom and I find it's interface much better than stock. Are you still developing this rom or did you stop development?
Harweor said:
Hello. I tested the rom and I find it's interface much better than stock. Are you still developing this rom or did you stop development?
Click to expand...
Click to collapse
Developement has been stoped, because idk how fix the ril, and no one help with this. Anyway i'm bought a new device
Jokerank-4PDA said:
Developement has been stoped, because idk how fix the ril, and no one help with this. Anyway i'm bought a new device
Click to expand...
Click to collapse
I guess I've found the solution of modem, audio and camera bugs. What do you think about this solution, is it possible?
https://techboxlab.com/fixing-bugs-in-helio-p10-roms/
Harweor said:
I guess I've found the solution of modem, audio and camera bugs. What do you think about this solution, is it possible?
https://techboxlab.com/fixing-bugs-in-helio-p10-roms/
Click to expand...
Click to collapse
I'll tried all of these methods, and nothing working.
Hey, i found a giant thread about Helio P10 development and found some bugfixes that might help!
Here's the link: https://forum.xda-developers.com/android/general/mediatek-helio-p10-development-porting-t3664416 (It's Post #4)
Port the vermee mars rom I was the first one to have a working custom rom on it. You can find the topic yourself. I ditches that phone so never continued to work on it. Vermee mars worked.
Sad the development stopped
How did you port from that rom?
theres anybody found custom rom for us ???? F3212................
Tahsin88 said:
Port the vermee mars rom I was the first one to have a working custom rom on it. You can find the topic yourself. I ditches that phone so never continued to work on it. Vermee mars worked.
Click to expand...
Click to collapse
Tahsin merhaba. Senin dediğin Romu indirdim ama nasıl kullanılacağı ile ilgili en ufak bir bilgim yok. Kitaplarımın arasında bulduğum bu cihazı kullanılabilir yapmak istiyorum ama hiç birsey bilmiyorum. Root ve twrp kısmı tamam ama rom fly dedigimiz romu yükledim ve imei ses sorunu var. Hala buralardaysan yardım bekliyorum.

Categories

Resources