[Q] How to go to Bootloader on Lava MTAB MG7 - Android Q&A, Help & Troubleshooting

My Lava Mtab MG7 has become locked due to too many wrong pattern attempts. I can't log into the Google account to unlock it. I wanted to enter recovery mode to wipe data (hard reset). But I don't know the combination of key presses to enter the bootloader. I have tried the following:
1. Vol Up + Power
2. Vol Down + Power
3. Vol Up + Vol Down + Power
Can someone please help me understand how to go around this problem?

I think what you mean is recovery..... lava mtab's data cannot be wiped with stock recovery.... you need to install a custom one through archtools which requires root..... since you said your device is locked ...your lucky if your adb was set to on in developer option before the device got locked .... otherwise the only option is to flash the stock firmware image through rkflashtool.......
---------- Post added at 11:11 PM ---------- Previous post was at 11:02 PM ----------
and one more thing the stock firmware us almost impossible to get, I managed to get one from the service centre but seems the kernel image was not the right one..... cause its actually a Chinese tab callec D7 rebranded by lava .....I found that out after opening a unit which burned after I patched the kernel with overclock binaries ....
so I'd suggest you take it to the service centre they'll give you a replacement with a new unit.... ... I got mine replaced....but I manges hardbrick both of them....

Greyjawripper said:
I think what you mean is recovery..... lava mtab's data cannot be wiped with stock recovery.... you need to install a custom one through archtools which requires root..... since you said your device is locked ...your lucky if your adb was set to on in developer option before the device got locked .... otherwise the only option is to flash the stock firmware image through rkflashtool.......
---------- Post added at 11:11 PM ---------- Previous post was at 11:02 PM ----------
and one more thing the stock firmware us almost impossible to get, I managed to get one from the service centre but seems the kernel image was not the right one..... cause its actually a Chinese tab callec D7 rebranded by lava .....I found that out after opening a unit which burned after I patched the kernel with overclock binaries ....
so I'd suggest you take it to the service centre they'll give you a replacement with a new unit.... ... I got mine replaced....but I manges hardbrick both of them....
Click to expand...
Click to collapse
can u please provide that Chinese tab called D7 firmware link.
wbr

yash_npj said:
can u please provide that Chinese tab called D7 firmware link.
wbr
Click to expand...
Click to collapse
You can get the Lava Mtab MG7 stock rom from here : http://support.moulnisky.com/index.php?dir=Lava/Mtab MG7/
BR
Alex

Greyjawripper said:
I think what you mean is recovery..... lava mtab's data cannot be wiped with stock recovery.... you need to install a custom one through archtools which requires root..... since you said your device is locked ...your lucky if your adb was set to on in developer option before the device got locked .... otherwise the only option is to flash the stock firmware image through rkflashtool.......
---------- Post added at 11:11 PM ---------- Previous post was at 11:02 PM ----------
and one more thing the stock firmware us almost impossible to get, I managed to get one from the service centre but seems the kernel image was not the right one..... cause its actually a Chinese tab callec D7 rebranded by lava .....I found that out after opening a unit which burned after I patched the kernel with overclock binaries ....
so I'd suggest you take it to the service centre they'll give you a replacement with a new unit.... ... I got mine replaced....but I manges hardbrick both of them....
Click to expand...
Click to collapse
To go to recovery mod on lava MG7. All you need to do is to plugin your charger and switch off your
Tablet and let it be completely off.
Then after that press vol+ and power botton for 5seconds. . .
And wait. It will show an android warning. Then press power and vol+ again to enter to recovery mod. And from there you may 'wipe factory reset' and there you go. . .

Go to Terminal and "reboot recovery"

Related

.14 OTA update random reboot during boot (kind of a boot loop)

Hello,
Am I the only one with a boot-loop problem after the .14 update download and install ?
Since then, my tablet has been into a boot loop, and none of the methods found to find in the forums worked sor far.
1) Tried pinhole reset
2) Tried recovery data swipe
3) Tried the "EP201_SDUPDATE.zip" method. It just goes to a screen with a blue diamond in the droid. Then after 20 seconds, the droid is on the floor with a "!" red symbol. After 30 seconds, the device goes back to boot-loop ...
Nothing worked. I tried to root it via adb but somehow I can't install the drivers on my computer, my computer doesn't even see the device via USB since it's stuck in the boot loop.
Did someone had this kind of problem earlier ? I did nothing special, the device is not rooted, nothing ... and had 0 problem with .11 firmware, worked perfectly ...
Thanks for any advice you could have !
I'm having a similar issue since the 14 update. My TP was perfect until last night when the 14 update arrived; but has been suddenly re-booting and getting frozen on the reboot screen since. However, pinhole restart did work, at least temporarily. I'm tempted to try rolling back the firmware.
Likewise, my device is not rooted or altered in any way.
Can't believe they have rolled out a firmware upgrade that actually corrupts a fully functional device! Who are these jokers?
Will update if I find a solution; please do likewise!
I am experiencing the exact same issue since yesterday and so desperate about it since I had no problems at all before. .
So frustrating.
Some more info I found :
During the night I let my device on, rebooting etc ...
I've noticed yesterday it wasn't really a boot loop because sometimes it'd go to the screen with a grey asus logo and a spinner, sometimes it was even going to the screen where the system updates and tries to optimize applications. Each time I went to this screen, it was updating a couple apps then crashing and going back to boot.
So, I figured out that maybe if it was on all night, it owuld update all apps, and boot eventually ...
This morning, the screen was off ... pushed the power button and OH ! I was on the "First start" screen, where I had to choose my keyboard language. Did it, then chose wifi and .... back to boot !
So, it's not technically a boot loop, it's a MASSIVE reboot defect, the .14 firmware totally killed it, the OS doesn't have time to boot, it crashes before ? How can it be ?
I think I'm good for RMA, will try to contact ASUS also ...
Again, same problem for me .
Except the application optimization was made yesterday (not as it should be, I had one reboot after 1/87 applications optimized then the whole optimization).
Since then, sometimes (once in a blue moon), the tablet reboot completely as yours, and then after a few seconds/minutes "playing" on it, it reboots itself.
Etc...
adinava said:
Again, same problem for me .
Except the application optimization was made yesterday (not as it should be, I had one reboot after 1/87 applications optimized then the whole optimization).
Since then, sometimes (once in a blue moon), the tablet reboot completely as yours, and then after a few seconds/minutes "playing" on it, it reboots itself.
Etc...
Click to expand...
Click to collapse
I think our only hope is to recover it using the EP201_SDUPDATE.zip and be lucky enough for the tablet not to reboot during the recovery ... but it might take a lot of tries and it's boring to do ...
I think so. But is it possible to do so without root-access ? What does this method consist of exactly ? Where does this file come from ?
I downloaded the .11 update zip archive from Asus support, isn't it the same ?
adinava said:
I think so. But is it possible to do so without root-access ? What does this method consist of exactly ? Where does this file come from ?
I downloaded the .11 update zip archive from Asus support, isn't it the same ?
Click to expand...
Click to collapse
From what I read root is not required
Yes, it's the good file. Unzip it, inside there will be another zip file.
Rename this : EP201_SDUPDATE.zip
Put it in the root of a microSD card and then put the microSD in the Prime.
Once you've done that, reboot the prime (anyway yours will reboot quickly lol) by holding power and Volume Down button at the same time. Hold it until the first screen of boot comes up and until text appears on the top left.
As soon as you see the text, release everything, then press Volume UP.
It'll say "Booting recovery kernel image" "Signature Match".
If the tablet doesn't reboot before actually starting the recovery, you'll go to a screen with a droid with a blue diamond and then a "dead droid" with a "!" red symbol. I never passed this step as my device reboots before the end of the recovery ...
Good luck
I'm going to try that .
Have you seen testimonials of successful attempts ?
I mean, is it a valid method ?
---------- Post added at 02:18 PM ---------- Previous post was at 02:09 PM ----------
What should I do when I see the dead droid with the exclamation mark ? Wait ?
---------- Post added at 02:19 PM ---------- Previous post was at 02:18 PM ----------
Again, I don't think it's possible without root-access
---------- Post added at 02:22 PM ---------- Previous post was at 02:19 PM ----------
Damn, after a few seconds/minutes,it's rebooting again and stuck at Eee pad logo again
adinava said:
I'm going to try that .
Have you seen testimonials of successful attempts ?
I mean, is it a valid method ?
---------- Post added at 02:18 PM ---------- Previous post was at 02:09 PM ----------
What should I do when I see the dead droid with the exclamation mark ? Wait ?
---------- Post added at 02:19 PM ---------- Previous post was at 02:18 PM ----------
Again, I don't think it's possible without root-access
---------- Post added at 02:22 PM ---------- Previous post was at 02:19 PM ----------
Damn, after a few seconds/minutes,it's rebooting again and stuck at Eee pad logo again
Click to expand...
Click to collapse
It's supposed to work, look here : http://forum.xda-developers.com/showthread.php?p=22768294
I think the problem we're having is that our tablet randomly reboots during the process ...
Yes and no.
As I thought, elsewhere in the post (I already read partially), they said you must have a root-access. Maybe (and I think) the tablet will be unrooted again after that but I'm p***ed off with the idea to root my tablet for a problem I am not responsible for...
adinava said:
Yes and no.
As I thought, elsewhere in the post (I already read partially), they said you must have a root-access. Maybe (and I think) the tablet will be unrooted again after that but I'm p***ed off with the idea to root my tablet for a problem I am not responsible for...
Click to expand...
Click to collapse
They're talking about two different things I think, one thing is to flash the firmware with command line, this requires root of course.
Just wondering if anyone experiencing these reboots has captured a logcat? Seems to be a good first step in figuring out the problem.
Sent from my GT-I9000 using Tapatalk
Maybe, it's not clear out there. And I'm not sure to understand anything anymore.
Perhaps you should ask them to confirm this method doesn't need a root access.
xxbeanxx said:
Just wondering if anyone experiencing these reboots has captured a logcat? Seems to be a good first step in figuring out the problem.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
I'd love to, but I'm unable to get adb access to the prime, it reboots before my computer can even install the drivers
Ok so, once plugged with USB to my computer, and when finally the device wants to boot and stays on the "android configuration screen", windows is able to access the TF201 folder system ... but not luck with ADB, I guess that's because the debug option is not activated on the device and I can't pass the first configuration screen, it always reboots before the end of it
Another update : using the EP201_SDUPDATE.zip method, I was able to install the US .14 firmware, but result is the same, reboots like crazy.
I'm currently trying to get the .11 US firmware to try to downgrade, but it's hard to find, asus removed all the older US firmwares from their servers, god knows why
EDIT : found the 11.1 firmware, doesn't work ... I'm stuck with .14 firmware
anthonyalberto said:
Another update : using the EP201_SDUPDATE.zip method, I was able to install the US .14 firmware, but result is the same, reboots like crazy.
I'm currently trying to get the .11 US firmware to try to downgrade, but it's hard to find, asus removed all the older US firmwares from their servers, god knows why
EDIT : found the 11.1 firmware, doesn't work ... I'm stuck with .14 firmware
Click to expand...
Click to collapse
did you try this for downgrade? http://forum.xda-developers.com/showthread.php?t=1492887
cyberguest said:
did you try this for downgrade? http://forum.xda-developers.com/showthread.php?t=1492887
Click to expand...
Click to collapse
I can't use it, no adb access ...
anthonyalberto said:
I'm currently trying to get the .11 US firmware to try to downgrade, but it's hard to find, asus removed all the older US firmwares from their servers, god knows why
Click to expand...
Click to collapse
here old firmwares for prime

Samsung S3 won't load passed boot screen?

Hi guys
I have done my basic research on all the forum room and can't find a answer to my problem.
I have Samsung S3 , I have not rooted or flash the device , I have not install any apps for the pass 2 months , for some reason today my device restarted and then got stuck on boot screen "Samsung Galaxy S3 GT-I9300" , am totally new to android and only had my device 9 months.
from all the basic searches I have done , I have try pressing vol key up + Home Key + power key) nothing happen
I tried : Switch off the device.
Press and hold Volume Up + Home Button + Power Key.
After 2-3 seconds, release the Power Key.
nothing happens here either this suppose to do a hard reset
I have taken the battery out , re-inserted the battery hold the power key for 10secs and I still don't get any where
each attemp I only get the boot screen the only luck I have had was by pressing the vol key down + home key + power key , i get the downloading Rom and this obviously does nothing as I can't get to the internet via wireless
please someone helpme the last person who posted this type of topic on this forum room did not get any replies.
I am sure I am not the only one who has experience this problem.
I am with three network if that makes any differents
thanks for your support.
Search 'sudden death' - you'll find more on it there
I has this problem with mine - I ended up taking it to Samsung for repair under warranty: it was a mother board replacement
it is however possible that you could fix it
Cn you get into download mode? (home + power + vol down)
if you can get to download mode ^^^ post above then all is well all you need to do is flash stock rom.
Getting into download mode is good news, Now plug your phone in to your computer, launch ODIN, and flash the correct stock firmware.
Thank you guys for your prompt reply , I have decided to take the device back to Car phone Warehouse as it is still under warrantee , I don't want to risk the manufacture guarantee. On this note I will like to salute all those geek's who have rooted their phones. :cyclops:
waheedrafiq said:
Thank you guys for your prompt reply , I have decided to take the device back to Car phone Warehouse as it is still under warrantee , I don't want to risk the manufacture guarantee. On this note I will like to salute all those geek's who have rooted their phones. :cyclops:
Click to expand...
Click to collapse
welcome in the emmc burned club - you are number ???
Flashing stock rom - chainfire tar - recovery tar - or whatever wont help you, i made a thread about it, no matter what you get "cant get pit" when you flash in odin
Sorry bR0 - seams like samsung made a MAJOR hardware error here - makes me thinking twice again before buying a sammy phone again, its a pitty cose it really is the nicest phone out there - maybe htc phones dont do this crap.. dont now
And since you haven't rooted or even flashed it, it proves just further that this is no "soft" problem but only faulty hardware !!!
Here is my link to tar files >http://forum.xda-developers.com/showthread.php?t=2019902
And just so you now, flashing a rom DONT void your guarantee, in EU at least, its a proven court judgment ! > http://forum.xda-developers.com/showthread.php?t=1998801
Urgent illegal advice required on 'sudden death'
Hi all /comrades
Four days ago I decided that I had to take Samsung Galaxy S3 to Carphone warehouse for repairs as the phone was still under manufacture warrantee , I did not wanted to go via the rooted / flashing my ROM . well guess what happen.
Carphone Warehouse Engineer total me the following and I quote " Please read notes , unfortunately handset returned unrepaired due to device rooted thought custom firmware, we have provided photo evidence. this is classed as Chargeable repair , please speak to one of the sales team to verify the cost of charge if you wish to take this ."
okay the photo screen that they gave me was of the one where you hold the volume button done + Home screen + power button and you get the Android stating its downloading on the top left side system status : custom and its this point he make out to me that I try to root or have rooted my phone.
as you all know I haven't got a clue on how to root or flash a phone never mind doing it.
I need your help , I am going to take Carphone Warehouse Ltd to Small courts to claim the cost of my phone and line rental back , How do I prove to the hight court that I actually did not root my device and Carphone Warehouse was trying to claim extra cash from me.
please all techie help me.
GUY I NEED HELP PLS
i tired flashing custom firmware and now all i get is flashing logo on bootup and reboots again and again...
i tried what mention in this thread but no luck!!
pls help and adive...
shub said:
GUY I NEED HELP PLS
i tired flashing custom firmware and now all i get is flashing logo on bootup and reboots again and again...
i tried what mention in this thread but no luck!!
pls help and adive...
Click to expand...
Click to collapse
If Stock ROM Via Odin Didn't Work Then Try Flashing Kernel
THE.W!ZARD said:
If Stock ROM Via Odin Didn't Work Then Try Flashing Kernel
Click to expand...
Click to collapse
which kernel mate?
---------- Post added at 07:36 PM ---------- Previous post was at 07:35 PM ----------
im trying to flash
I9300XXELKC_I9300OXXELK4_I9300XXELKC_XEO
---------- Post added at 07:37 PM ---------- Previous post was at 07:36 PM ----------
ok ive just done MEGAWIPE
so what should i flash.. pls advice...
---------- Post added at 08:36 PM ---------- Previous post was at 07:37 PM ----------
hi
i tired flashing back to orignal stock rom
I9300XXDLJ4_I9300OXADLJ4_BTU
still no joy!!
really need some advice pls...
ive tried many thing but no luck
all it does,,, every rom is flashing fine - via odin or cww but when it reboots the samsung logo keep flashing... it looks as if the phone is rebooting itself! dosnt go pass the samsung boot logo...
helpp plssss
pls guys... any help??
i can get into recovery and download mode... flashing stock and custom rom but it just wont go past the samsung boot screen.. it just rebooting on its own...
pls advice...
Same problem here... I tried flashing stock/official 4.1.1 after trying 4.1.2 and now I cant flash with either of them.
I tried flashing the siyah kernel and this had no effect either.
Please help.
Cask said:
Same problem here... I tried flashing stock/official 4.1.1 after trying 4.1.2 and now I cant flash with either of them.
I tried flashing the siyah kernel and this had no effect either.
Please help.
Click to expand...
Click to collapse
did exactly same..
this happen when i flashed 4.1.2
just to update.. i manage to fix this by applying I9300XXBLG8_I9300OXABLG8_I9300XXLG8_HOME.tar.md5
You may reset your phone by "Firmware Upgrade And Initialization" in the "Tools" of Samsung KIES 2.5. It will download the latest firmware for you as well.

help ipro A3

hello all , 20 days ago I purchased this phone ipro mod A3 , immediately found the problem that the data connection and the wi.fi you , empowered by yourself even if I shut them . At this point I turned to the seller explaining the problem and he sent me a link to download sp flash tool and software. At this point the phone format , format whole flash and then I install the software, so everything is ok . I turn the phone starts normally , then exit the text imei null and at this point I start to worry . I search the internet and find a solution I do root your phone with vroot and then I used mtk droid and I put the codes imei . I notice that the programs they were when you first turn there were no more ' , the data connection and the wi-fi does not enable more' alone, but only if I do. the problem now and that if I enable the data connection with the sd card in the phone shuts continuing to say inspettatativamente removed sd , sd card and then comeback continues so
phone info
model A3
Android version 4.2.2
version baseband MOLLY.WR8.W1350.MD.WG.MP.V4.P3 , 09.23.2013 11:27
version 3.4.5 kernel builder @ c1 # 1 Mon Dec 16 15:18:26 CST 2013
build number A3_I9430_IPRO_2G_MP_V1.1
custom build version 131216
Room ipro a3
Good afternoon.
sir would you kindly make a backup of your computer to pasarmelo, is that I have the same computer and have died encesito urgently rom this quipo if possible that I spend my mail is [email protected]
thank you very much
---------- Post added at 10:09 AM ---------- Previous post was at 10:03 AM ----------
I wonder if this will support 3g quipo in place that dond located or have a base upgrade you please provide me band.
Thank you.
Also a problem with the IPro A3
I dont hink he can make a backup of his Phone you could use, It uses UBIF so backup from Phone could be little bit more than just trickie.
Mine has a Problem after i deleted the weatherapp. After deleting Phone says System UI sutdown - Thats a classical softbrick as i cant use it anymore. i wrote to the factory and asked for a Link to the Rom a few minutes ago. Hope i get some.
Stanner 1978 could maybe send the Link he got from the factory or upload it somewhere, maybe ist is a other Version i´ll find there (newer), if i got some resume from the factorys Supportteam.
That Phone seems not to be very stable in the moment. Got a other one for my Son that couldnt find any Net with both simslots, send it back to the salesman and hope to get a functionally one then.
Best regards Chucky:highfive:
josevelsan said:
Good afternoon.
sir would you kindly make a backup of your computer to pasarmelo, is that I have the same computer and have died encesito urgently rom this quipo if possible that I spend my mail is [email protected]
thank you very much
---------- Post added at 10:09 AM ---------- Previous post was at 10:03 AM ----------
I wonder if this will support 3g quipo in place that dond located or have a base upgrade you please provide me band.
Thank you.
Click to expand...
Click to collapse
I tried to contact the factory but they told me, I also tried with a backup of a friend, but it was not accepted. I finally surrendered to us are passed over with the fork lift, the end solution for your phone ****

[Q] Something maybe between Brick and Bootloop

Anyone who can answer,
I own a Swipe Legend. Its specifications are listed below.
I last did 2 things due to which it may have happened.
1. I was using ROM Toolbox Pro to change my font and backup old. I didn't like the new font so restored my old one. But there were too many fonts in the backup, so I thought they were in different uses. I selected all and rebooted. My battery suddenly dropped to about 25% from 48% during changing font some minutes before, and the brightness of pre-boot image was high, I plugged it during that image. Rest is in 2nd reason why I think it could have happened.
2. I put it on charger, forgot it and slept. Later after about 4 hours or so, I did unplug it but it is not working since then. However, this has happened a couple of times with me.
I hope you can help.
Problem: Sorry for not stating the problem first, but I am putting in sequence of time.
Whenever I start it, I can do just 4 things:-
1.See the pre-boot image
2.See the boot animation(the reason I can not show it, as it shows that my phone was rooted. Other reason is that the 1 year warranty is over)
3.Go to the recovery mode
4.See the 'Android is upgrading....' screen
After the 'Android is upgrading....' screen, it goes back to boot animation, then back to the 'Android is upgrading....' screen, and finally after some time screen gets off and I can not turn it on, although I can turn on light of the buttons by power button. Screen gets on for battery notification, and I can see the 'Android is upgrading....' screen. I can always take it to recovery mode, but can not switch it off once it is on so I have to wait for battery to finish. So it may not be bootloop, because that happens just 1 time when it goes back to boot animation. It is also not bricked, as it can do the 4 things.
Solutions already tried:
1. I have hard reset the phone at first.
2. I tried adb and fastboot but they do not recognize my device, maybe due to resetting of USB debugging option after the reset
3. No ROM or CWM is available on my phone, after searching and even using Goo manager
4. I tried removing the SD card after reset, but condition is same
About the phone:-
Name: Swipe Legend
Model: Alps hexxing77_ics2
Android: v4.0.4
Memory: 4GB ROM+32GB SD+512MB RAM
Processor: 2x1.5GHz Dual core(But I think it to be 1GHz dual core due to analysis by apps like Pi)
Screen: 7 inch
Pixels: 800*480
Status: Originally rooted, but maybe root is lost after reset
Already experienced reset: Yes, but it was not rooted by that time
USB Debugging: Was on last time, but maybe offed after factory reset
More details: I can not get the links but it can be searched on amazon or a site like naaptol.com.(I'm from India so don't know any shopping sites of other countries)
If any detail is missing, you may ask.
Please help if you can
Dump your recovery image
Go to builder.clockworkmod.com
Upload the image there
Get cwm for your phone
Press thanks :good: I'd helped :highfive:
---------- Post added at 08:34 PM ---------- Previous post was at 08:33 PM ----------
And yes
Take a backup of rom if are able to boot
Press thanks :good: I'd helped :highfive:
arnabbiswasalsodeep said:
Dump your recovery image
Go to builder.clockworkmod.com
Upload the image there
Get cwm for your phone
Press thanks :good: I'd helped :highfive:
---------- Post added at 08:34 PM ---------- Previous post was at 08:33 PM ----------
And yes
Take a backup of rom if are able to boot
Press thanks :good: I'd helped :highfive:
Click to expand...
Click to collapse
This seems good, but I don't have anything like recovery image. I once took a backup of user data but even that's corrupted. Is there any way to get the recovery image for my phone or it needs to be compiled by myself? Actually, I don't know much about recoveries and such things.
Use the command
dd if=/dev/recoverypartition of=/sdcard/recovery.img
Only you need to know the recoverypartition
It may be something like mmblck0p1
Only the numbers vary
Has your phone booted?
Press thanks :good: I'd helped :highfive:
arnabbiswasalsodeep said:
Use the command
dd if=/dev/recoverypartition of=/sdcard/recovery.img
Only you need to know the recoverypartition
It may be something like mmblck0p1
Only the numbers vary
Has your phone booted?
Press thanks :good: I'd helped :highfive:
Click to expand...
Click to collapse
Thats the only problem.
I can not enter any sort of command line.
Terminal: Not possible unless phone boots properly
ADB: Does not detect my phone
Another problem is my internet connection, due to it I can not access internet anytime.

Where I will get Nokia 1 TA-1066 (MT6737MChipset) firmware (Nokia-1-Frontier)

Dear Devs,admins,
I purchased recently nokia 1 ta-1066 model. recently During installation google security patch my phone got shutdown, then i think there is no charge in my phone , i have taken charging my phone whole day( 8hrs) , my phone not responponding for power button and also power+ vol up button to boot recovery
i finally conformed my phone is hardly dead
no sign,
no life,
just a toy(even childd not like somuch)
" hard bricked"
help pls......................................................
Hey people any update on TA- 1066 Firmware files?
Phone bricked BAD
unlocked Bootloader
flashed TWRP
and the phone bootlooped (boots straight to TWRP)
messed around too much and long story short; No OS anymore,
can push/pull adb and Fastboot still usable but that's pretty much it..
Even GSI roms don't boot.
any help is MUCH appreciated
thanks, hoping for some help
https://forum.xda-developers.com/nokia-1/help/nokia-1-ta-1066-dual-sim-india-hard-t3880265
---------- Post added at 11:25 PM ---------- Previous post was at 11:19 PM ----------
https://forum.xda-developers.com/nokia-1/help/nokia-1-ta-1066-dual-sim-india-hard-t3880265

Categories

Resources