USB Charging : Okay
USB ADB : Okay
USB MTP : Okay
Video : Okay
Audio : Okay
Sensors : Okay
Screen rotation : Okay
WLAN : Okay
WLAN Hotspot : Okay
GPS : Okay
GSM : Okay
GSM Data : Okay
GSM Voice : Okay
GSM SMS : Okay
Bluetooth : Okay (BUG: Settings menu, the Bluetooth connection button does not work, but if you enter the Bluetooth menu, and there you turn it works.)
NFC : Okay (After the first boot, turn off the NFC and reboot your phone will then operate normally NFC)
Camera : Okay
FM Radio : Okay (SpiritFM Settings->Audio->Method->Digital Qcom OneXL/S/Sony/MoG)
Keyboard : Okay
MHL : Okay
OTG : Okay
Changelog pac-4.3_LBL-20140319-UNOFFICIAL-huashan
-Wifi mac load fix
-cpu thermal fix v2
Changelog pac-4.3_LBL-20140316-UNOFFICIAL-huashan
Install:
1: CWM-> Wipe data factory reset
2: CWM-> installing the ROM and then the GAPPS is also
3: CWM-> Power off
4: Flashtool: installed on this C5303_12.1.A.0.266_C1-FW.ftf
The ROM is also included CWM whatever the volume down button to enter.
Download:
pac-4.3_LBL-20140319-UNOFFICIAL-huashan
4.3 GAPPS
C5303_12.1.A.0.266_C1-FW.ftf
Source:
hijack-ramdisk-huashan
android_device_sony_huashan
android_device_sony_qcom-common
android_vendor_sony
Screenshots:
Credits:
-dh.harald
-KeiranFTW
-cray_Doze
-davidmarco
-dssmex
-DooMLoRD
-PAC-man Team
-PA Team
-AOKP Team
-Cyanogenmod Team
How?
Since it is possible to boot non Sony ROMS with LB ROMS are popping out of the ground like trees.
@ OP: Is it possible to do the same with KitKat (CM11)?
Nice work!
Wow amazing work, it is as if ROMs are raining down from the sky now on LB now.
Sent from my Xperia SP using xda app-developers app
mrjraider said:
Since it is possible to boot non Sony ROMS with LB ROMS are popping out of the ground like trees.
@ OP: Is it possible to do the same with KitKat (CM11)?
Nice work!
Click to expand...
Click to collapse
All these roms existed back on 4.1.2...They were based on a 4.3 kernel..Now that we have a 4.3 kernel we don't need to change kernel so anyone can rebuild the roms based on the stock kernel.Unlocking the bootloader enables you to change kernels but now we have a 4.3 rom and if we rebuild it based on a 4.3 stock kernel there is no need of having unlocked bootloader.... KitKat roms require a change of kernel(4.4 kernel) which you can't change unless you have unlocked bootloader
Woooot.
And another one! ^^
TBH, the only one that's missing me is slim.... ^^
Sent with XSP running CM10.2 LB
Thanks very much, can you make a function to lock apps? xD if not please
try to made a kernel to 4.4.2 for locked bootloader if possible?
You are awesome!
---------- Post added at 09:22 PM ---------- Previous post was at 09:04 PM ----------
I LOVE U
Well, KitKat is totally possible on locked BL. We don't need to change kernels for it, we "just" need to compile a module for every change in the kk kernel, and then insmod the modules before hijacking ramdisk. So, it's possible, but really time-consuming.
The best solution is to get kexec working on locked BL's.
There's a thread on xda about it, where delewer, dh.harald and others tried to make it work. Maybe you, @bagyusz, should try? You showed us that you have great skills.
And, just to clarify, with kexec we will be prepared for Android 4.5, 4.6... and we won't need to make separate ROMs for locked and unlocked BLs. Also, MultiROM solutions would be possible.
Complete freedom and equality!
Sorry for my English!
BUG FOUND : CPU THERMAL HIGH
The cell is burning on my hand can you fix this?
Can you do a kitkat rom for locked bootloader ?
Ram Management
Is zip only 200MB to download? Is it normal?
Wysłane z mojego C5303 przy użyciu Tapatalka
Remlas said:
Is zip only 200MB to download? Is it normal?
Wysłane z mojego C5303 przy użyciu Tapatalka
Click to expand...
Click to collapse
Yup, it's perfectly normal
MrSteve555 said:
Well, KitKat is totally possible on locked BL. We don't need to change kernels for it, we "just" need to compile a module for every change in the kk kernel, and then insmod the modules before hijacking ramdisk. So, it's possible, but really time-consuming.
The best solution is to get kexec working on locked BL's.
There's a thread on xda about it, where delewer, dh.harald and others tried to make it work. Maybe you, @bagyusz, should try? You showed us that you have great skills.
And, just to clarify, with kexec we will be prepared for Android 4.5, 4.6... and we won't need to make separate ROMs for locked and unlocked BLs. Also, MultiROM solutions would be possible.
Complete freedom and equality!
Sorry for my English!
Click to expand...
Click to collapse
I already have a boot able cm11, but there is no picture to display. Should we display a highly modified CAF source. CM10.2 It works because the default lib files were used.
im unlocked.. im on cm11.. but cn i boot this? this one look interesting..
danielhariri said:
im unlocked.. im on cm11.. but cn i boot this? this one look interesting..
Click to expand...
Click to collapse
Just use normal PacRom Link if you have an unlocked bootloader.
0l1v3rof said:
Just use normal PacRom Link if you have an unlocked bootloader.
Click to expand...
Click to collapse
theres no download link n i had tried it before.. bootlooped.. btw this rom amazing.. no issue at all... testing batery life now..
---------- Post added at 01:02 AM ---------- Previous post was at 12:50 AM ----------
on first test i was able to get this score 21248 1.6ghz interactive... compare to other custom rom.. this rom the best so far..
Hello,
Same question, as i'm a noob on xperia sp (ok on galaxy s2).
I have unlocked the sp of my son, could he use this rom ?
For the installation, just like in the OP ?
Thanks in advance.
jm78
bagyusz said:
I already have a boot able cm11, but there is no picture to display. Should we display a highly modified CAF source. CM10.2 It works because the default lib files were used.
Click to expand...
Click to collapse
Please, release the cm11 for unlocked bootloader we dont need a iamge for boot
I prefer cyanogenmod because pacman and others roms are bugging CPU thermal , and battery is terrible
i using your cyanogenmod 10.2 and battery is awesome
Please!!
jm78 said:
Hello,
Same question, as i'm a noob on xperia sp (ok on galaxy s2).
I have unlocked the sp of my son, could he use this rom ?
For the installation, just like in the OP ?
Thanks in advance.
jm78
Click to expand...
Click to collapse
you can install normally, here's a guide: CLICK HERE
Related
Hi my friend... i really want to see how aosp based rom will run on our phone
This is a simply port of devianxone rom builded by $droyds$ for the tmo version with a kernel compiled by me from intervirgilium github.
1- set up the TWRP
2- reboot in recovery ( will start fastboot ) and boot into recovery;
3- make a backup;
4- factory reset;
5- install the rom zip from sdcard ( where you must had copy the rom );
6- reboot recovery ( so you will be again in the fastboot mode);
7- do this:
Code:
fastboot boot boot.img
8- enjoy the speed
all credits go to @$Droyds$ for the rom and to intervigilium for the kernel source
DONATE to @$Droyds$ for his work
Download the ROM
Download the kernel
The rom is still bugged so don't report anything, it's just for testing purpose.
O.O don't you need the bootloader unlocked ?
Hey! is it for D855 or F400x?
CheesyNutz said:
O.O don't you need the bootloader unlocked ?
Click to expand...
Click to collapse
yes... this is why you need fastboot to boot
Kniazkoff said:
Hey! is it for D855 or F400x?
Click to expand...
Click to collapse
D855 only
Would be nice to have the recovery package.
Verstuurd vanaf mijn LG-D855 met Tapatalk
I never us fastboot,but i want to flash this rom and kernel.is it a dangerous,can i messed up something?
Skin1980 said:
yes... this is why you need fastboot to boot
D855 only
Click to expand...
Click to collapse
Thanks for providing this rom for the G3 community.
For the sheer sake of security, it would be better to add to the title the model this rom is intended to.
This way there will be les confusion among the users, particularly those who don't read the entire thread.
Thanks
juliocesar55 said:
Thanks for providing this rom for the G3 community.
For the sheer sake of security, it would be better to add to the title the model this rom is intended to.
This way there will be les confusion among the users, particularly those who don't read the entire thread.
Thanks
Click to expand...
Click to collapse
you are right... i'm going to do it
oska3 said:
I never us fastboot,but i want to flash this rom and kernel.is it a dangerous,can i messed up something?
Click to expand...
Click to collapse
If you follow the guide on the TWRP thread i linked you can make a backup and, after the test, restore everything.
Wow ?
@Skin1980 just copy my thread and change for your device.. Be sure to be as detailed as you can on install.. We need to talk cause if you can explain to me what you changed for d855 and this is a legitimate flash method I can source it and get some support out for you.. Pm me your hangout info and I'll hit you up after I wake up..
You'll need to re port tonight I've got a lot of fixes in the next build.
$droyd$ said:
@Skin1980 just copy my thread and change for your device.. Be sure to be as detailed as you can on install.. We need to talk cause if you can explain to me what you changed for d855 and this is a legitimate flash method I can source it and get some support out for you.. Pm me your hangout info and I'll hit you up after I wake up..
You'll need to re port tonight I've got a lot of fixes in the next build.
Click to expand...
Click to collapse
Could you upload the package or mirror it
Verstuurd vanaf mijn LG-D855 met Tapatalk
$droyd$ said:
@Skin1980 just copy my thread and change for your device.. Be sure to be as detailed as you can on install.. We need to talk cause if you can explain to me what you changed for d855 and this is a legitimate flash method I can source it and get some support out for you.. Pm me your hangout info and I'll hit you up after I wake up..
You'll need to re port tonight I've got a lot of fixes in the next build.
Click to expand...
Click to collapse
I have issue with wifi... when i fix it i will contact you.
Skin1980 said:
I have issue with wifi... when i fix it i will contact you.
Click to expand...
Click to collapse
you have it instaled in a d855 international with bootloader? or t-mobile free bootloader?
limdnas said:
you have it instaled in a d855 international with bootloader? or t-mobile free bootloader?
Click to expand...
Click to collapse
Locked bootloader
Sent from my LG-D855 using XDA Free mobile app
"You'll need to re port tonight I've got a lot of fixes in the next build."
waiting patiently... will surely try the next build
way to my G3…. waiting to open…. splash screen now….
Worked but, touchscreen stopped working, and then I pull off battery, and now I can't boot to recovery. :x
EDIT: boot certification verify, error ;x
EDIT2: Fixed entering in Recovery Mode ( Volume DOWN + Power Button, since LG Logo appears, than release and press anothertime until recovery), so can bootup.
All working, hope fixing the wifi problem, and making it as taste as CM11 with luncher and other apps.
and we need to flash Gapps.
WiFi.. That's an easy fix.. I'll pm you how..
Hi,
M4 aqua will add to AOSP PROJECT sony? Older model like m2 was added.
Wysłane z mojego E2303 przy użyciu Tapatalka
Maybe. It's always a possibility
ardentis said:
Maybe. It's always a possibility
Click to expand...
Click to collapse
the AOSP for M4 2303 is already available, if you look in the Software Binary file for Marshmallow its already included (tulip) files required in the zip file. http://developer.sonymobile.com/downloads/tool/software-binaries-for-aosp-m-android-6-0/.
Also if you look at the AOSP Build instructions, it includes tulip (E2303) as well (http://developer.sonymobile.com/knowledge-base/open-source/open-devices/aosp-build-instructions/how-to-build-aosp-marshmallow-for-unlocked-xperia-devices/.
But Sony has not officially announced it as officially there is no Boot Loader unlock instruction.
If you are willing to take the risk and know how to build, you can always contribute to the build
RohitBopnna said:
the AOSP for M4 2303 is already available, if you look in the Software Binary file for Marshmallow its already included (tulip) files required in the zip file. http://developer.sonymobile.com/downloads/tool/software-binaries-for-aosp-m-android-6-0/.
Also if you look at the AOSP Build instructions, it includes tulip (E2303) as well (http://developer.sonymobile.com/knowledge-base/open-source/open-devices/aosp-build-instructions/how-to-build-aosp-marshmallow-for-unlocked-xperia-devices/.
But Sony has not officially announced it as officially there is no Boot Loader unlock instruction.
If you are willing to take the risk and know how to build, you can always contribute to the build
Click to expand...
Click to collapse
I wasn't aware about AOSP for tulip. Too bad it's a prebuilt kernel. I think I might try to build this after school is out. If anyone else wants to build it, that would be great
ardentis said:
I wasn't aware about AOSP for tulip. Too bad it's a prebuilt kernel. I think I might try to build this after school is out. If anyone else wants to build it, that would be great
Click to expand...
Click to collapse
Great, i have a very bad computer to build, but i can help test the build if possible.
Error while flashing AOSGP ROM
Hallo, I tried to flash on my phone the AOSGP Rom. I can flash the addon without any problem. When I tried to flash the rom there is an error message.
"e:error executing updater binary in zip"
Has anybody an idea how to fix it?
My phone is rooted and the BL is unlocked.
I use TWRP 2.8.7.0
the firmware is 26.1.A.2.167
E2303
Nobody?
19Patrick said:
Nobody?
Click to expand...
Click to collapse
You should use newest twrp. I think it is now RC2.
OK thanks i will try it in the evening.
I did it. Thank you for your advice.
---------- Post added at 09:29 PM ---------- Previous post was at 08:58 PM ----------
What hapend if I do a system wipe and flash the rom after?
How can I change the dpi in AOSGP 1.1?
hello xda
i found this rom yesterday here it is only for d802 but if u have d800 u can try blastagator patch (I am not responsible for for any thing happen to your phone)
youtube video here
this is not my rom
Looks awesome. I like it.
it is stock based or Aosp ? LP or KK ?
stock 5.0.2 @TornadoMiMo
just installed it and what can i say , just great
amin44 said:
stock 5.0.2
Click to expand...
Click to collapse
Google edition 1.5 based rom added some apps and mod
Very nice rom, i almost feel like i buy xperia phone lol, i whuld only sugest to deweloper if he can see this or read, make aroma options, because i feel that there is too mutch of blotver apps from experia, which, i personaly always delete eaven on my xperia phone
note: work on my d800 with blastagator patch and dorimanx kernel
please translate the way i can install the rom to english i don't understand how to install it
based on CM or Stock ?
@GnehWnos just choose the first Suggestion at aroma ,it is stock 5.0.2 based
I installed the rom and I have f2fs cache.
After rom installation i rebooted to recovery to install dorimanx kernel. unfortunately twrp doesn't load. I only see the twrp logo and then my phone reboots.
The rom stucks at a screen "encryption" or something. What can I do?
amin44 said:
stock 5.0.2 @TornadoMiMo
Click to expand...
Click to collapse
I think it is CM13 based. On video, it is displayed "6.0.1".
@Alex93917 it is stock based 5.0.2 see original thread
@lollipo I think your data was encrypted back to stock tot
Can please someone upload somewhere?
The download is totally slow.
intrersting tnx
Too much bloatware.
Wysłane z mojego LG-D802 przy użyciu Tapatalka
This ROM will reflash BOOT,RECOVERY....etc.
You must first replace zen-recovery.img within the ZIP archive, or flash the newest RECOVERY again. Otherwise the RECOVERY is downgraded and can not be accessed.
Installed in all ext4 format, and then backup and restore converted to F2FS(data,cache). Flash Dorimanx 12.0 Kernel is working very good and fast.
Unfortunately, many Xperia APP can't use.
amin44 said:
@GnehWnos just choose the first Suggestion at aroma ,it is stock 5.0.2 based
Click to expand...
Click to collapse
Could you please how to insatall on D800 and where can i download patch?
---------- Post added at 08:56 PM ---------- Previous post was at 08:43 PM ----------
Harris777 said:
Could you please how to insatall on D800 and where can i download patch?
Click to expand...
Click to collapse
Can i install themes?
@Harris777 flash this after rom https://forum.xda-developers.com/att-g2/development/stock-patch-stock-g2-rom-att-t3124809 and no u can not install theme it is stock based
Hi, I found Miui8 for G2 it's from XDAVN I think. I have tested on my G2-D802 it's ok but I have not check everything just overall it's working. It's from this youtube link, credit go to them and the original developer of the rom:
https://www.youtube.com/watch?v=sTrYVpSQdG4
Instruction to install use TWRP to flash, note this is test for G2-D802, other variants may need different KK Bootloader/modem/kernel. Flash it at your own risk, make sure to backup your current rom/system.
How to flash:
Flash rom + kkbootlader + lambdakernel + supersu + modem (for sound):
Miui 8 ROM;
https://docs.google.com/uc?id=0B9MuyN...
KK Bootloader; for D802, other variants may need its own Bootloader;
https://www.androidfilehost.com/?fid=...
Lambda Kernel; for D802, other variants may need its own kernel for it to work.
https://mega.nz/#!YxQERZwR!D5bBaHfa5E...
You may check here for Lambda Kernel download: https://github.com/GalaticStryder/kernel_lge_msm8974/releases
Modem for D802, other variants may need its own modem for sound to work;
https://yadi.sk/d/kdDShdBUy3NsF
Enjoy Miui8!!
Sorry some problem with download link I think:
Some guide in this tread:
http://www.htcmania.com/showthread.php?t=1247103
Rom download link for all variants Aroma installer:
https://mega.nz/#!x8BmxBbS!Zghodf5Q48KuU6RkLS2B2i4iTgvhVyk8tfZRB9FOfnc
Google drive: https://docs.google.com/uc?id=0B9MuyNCZuhbkeUxpb01jdEI1VXM&export=download
Lambda kernel D-802 only:
https://mega.nz/#!YxQERZwR!D5bBaHfa5EALrAkjELLy0SERxj2XT-5KApUA3qvQo8M
Lambda Kernel for other variant: https://github.com/GalaticStryder/kernel_lge_msm8974/releases
Modem D-802 only:
https://yadi.sk/d/kdDShdBUy3NsF
Moon75 said:
Hi, I found Miui8 for G2 it's from XDAVN I think. I have tested on my G2-D802 it's ok but I have not check everything just overall it's working. It's from this youtube link, credit go to them and the original developer of the rom:
https://www.youtube.com/watch?v=sTrYVpSQdG4
Instruction to install use TWRP to flash, note this is test for G2-D802, other variants may need different KK Bootloader/modem/kernel. Flash it at your own risk, make sure to backup your current rom/system.
How to flash:
Flash rom + kkbootlader + lambdakernel + supersu + modem (for sound):
Miui 8 ROM;
https://docs.google.com/uc?id=0B9MuyN...
KK Bootloader; for D802, other variants may need its own Bootloader;
https://www.androidfilehost.com/?fid=...
Lambda Kernel; for D802, other variants may need its own kernel for it to work.
https://mega.nz/#!YxQERZwR!D5bBaHfa5E...
You may check here for Lambda Kernel download: https://github.com/GalaticStryder/kernel_lge_msm8974/releases
Modem for D802, other variants may need its own modem for sound to work;
https://yadi.sk/d/kdDShdBUy3NsF
Enjoy Miui8!!
Click to expand...
Click to collapse
Dear Moon,
May you share us the status of the Battery? Is there any Battery drain in this ROM?!!
Thanks.
Xposed working?
Wysłane z mojego LG-D802 przy użyciu Tapatalka
vs980 variant extracts ls980 variant patch (you can see it in the installer), just delete the ls980 folder in variant>ls980, rename vs980 to ls980 and flash lambda kernel.
This rom is beautiful and butter smooth. outstanding. just beautiful.
flash miui 8 on ls980. so far the rom is perfect for daily use. the two bug i notice is
1- the wallpaper crousal is still missing.
2- Pattern lock and Applock is not working.
I hope developer will solve out this issue .
worked fine on LG G2 VS980..
here is the link to learn HOW TO PORT MIUI TO ANY DEVICE http://forum.xda-developers.com/android/software/guide-build-port-miui-rom-to-device-t3250984
enazir92 said:
worked fine on LG G2 VS980..
here is the link to learn HOW TO PORT MIUI TO ANY DEVICE http://forum.xda-developers.com/android/software/guide-build-port-miui-rom-to-device-t3250984
Click to expand...
Click to collapse
you don't have any issue like pattern lock???
From my experience Miui8 is very efficient for battery life. I mean it's quite good I ran it for my Htc M8 battery is excellent and this one G2 should be not far off but my G2 is almost 3 years old. May be others can check it if anyone have doubt on that matter.
Whay kernel lambda is nugat, i tought it is mm rom ??
instaled with nugat kernel strange, on question how to properly root this rom, without secure boot error ?
Kornelije23 said:
Whay kernel lambda is nugat, i tought it is mm rom ??
instaled with nugat kernel strange, on question how to properly root this rom, without secure boot error ?
Click to expand...
Click to collapse
The kernel from the link provided is work for the rom. For root/install Supersu I use method from the link below it works:
http://forum.xda-developers.com/lg-g2/general/bump-supersu-t3273251
No boot error for me, when install Supersu flash script first then Supersu as from the link, I use supersu v2.76 it's ok.
Be very careful with this rom, after I flashed SU, I got bootlock.
emogangstaafan said:
you don't have any issue like pattern lock???
Click to expand...
Click to collapse
yes and app lock too is force closing itself
Moribus said:
Be very careful with this rom, after I flashed SU, I got bootlock.
Click to expand...
Click to collapse
i flashed the https://mega.nz/#!ppZUjBga!7B_mNsIlz...4YPsxokYKv7BoA which mentioned in KK Miui thread before SU. It worked.
Flashed: rom + kernel + bootloader + SU fix + SU + modem. It booted on d802. Before miui8 i was on cm14.1. Only GPS is not accurate.
For those above download link for rom isn't working try this one
https://docs.google.com/uc?id=0B9MuyNCZuhbkeUxpb01jdEI1VXM&export=download
emogangstaafan said:
flash miui 8 on ls980. so far the rom is perfect for daily use. the two bug i notice is
1- the wallpaper crousal is still missing.
2- Pattern lock and Applock is not working.
I hope developer will solve out this issue .
Click to expand...
Click to collapse
i have same problem and potrait position my screen rotates itself. on gallery and system settings
on ls980
emogangstaafan said:
flash miui 8 on ls980. so far the rom is perfect for daily use. the two bug i notice is
1- the wallpaper crousal is still missing.
2- Pattern lock and Applock is not working.
I hope developer will solve out this issue .
Click to expand...
Click to collapse
How did you do that? I have installed the rom and this does not pass the logo lg.
---------- Post added at 04:42 PM ---------- Previous post was at 04:08 PM ----------
i found this in the xdavn forum:
LG LS980 G2 CMU 13 Miu 8 VERSION BASED INSTALLATION INSTRUCTIONS FOR
1. twrp-3.0.2-1-ls980-bump-blastagator-signed flashed to turn off recovery mode
2. recovery mode Wipe / Advantage wipe / Dalvik cache-Art * system * data * Choose Wipe cache
3 cm 13.0-20160506-unofficial-in flash ls980
4. MIUI8-G2-All-Variant-XDAVN-26.10-fullot flash on !! D802 VARIANT SELECT MODEL !!
5. Lambda-Infinito-Nougat-beta-N5-in flash LS980-10122016
6. We do wipe process is complete.
Click to expand...
Click to collapse
Xperia XZ1 G8341 Vanilla AOSP ROM
This is my first ROM and its fully Vanilla. I Just followed this Build guide without any modifications whatsoever.
The future goal is to build a stable Rom with mostly FOSS Software, stability and useful tools/settings.
Bugs/missing functions i discovered so far:
- Camera Not working always and -> Lens Distortion. Although RAW should be possible.
- Sony Bootlogo has some Artifacts
- No automatic APN setting
- No NFC 25.05 working
- No 90/120Hz mode (or does it?)
- No Display Colour Calibration
- Low Singlethread Geekbench Score (836) and (6060 Multicore) [Governors and schedulers not optimized]
Fingerprint Sensor is working and it takes some time to find Network (not sure if bug or normal).
I hope to find usable answers to those problems + ideas and hope, to receive enough feedback to improve as much as possible.
Just Flash all files (boot, recovery [or any working TWRP], system,vendor, userdata and the OEM Binaries [
SW_binaries_for_Xperia_Android_9.0_2.3.2_v9_yoshino.img] and you should be good to go.
XZ1 Single Sim(25.05.19)
XZ1 Dual Sim
SW_binaries_for_Xperia_Android_9.0_2.3.2_v9_yoshino.img
120Hz Mode
Obviously I am not responsible for bricked devices or anything that this could be related to.
XDA:DevDB Information
RumiRom, ROM for the Sony Xperia XZ1
Contributors
celeron1
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: Stock AOSP Userdebug
Version Information
Status: Testing
Created 2019-05-25
Last Updated 2019-05-30
Don't use V8 binaries, V9 are out
https://developer.sony.com/file/dow...-for-aosp-pie-android-9-0-kernel-4-9-yoshino/
Worse perfomance is expected because of lack of qti perf framework
marios199546 said:
Don't use V8 binaries, V9 are out
https://developer.sony.com/file/dow...-for-aosp-pie-android-9-0-kernel-4-9-yoshino/
Worse perfomance is expected because of lack of qti perf framework
Click to expand...
Click to collapse
Neat!
Im gonna try these. Thanks a lot.
I would marry if you turn 60fps to 90-120-144 omg plz plz
ΒΕΓΑ said:
I would marry if you turn 60fps to 90-120-144 omg plz plz
Click to expand...
Click to collapse
There is little to nothing about this I could find for the xz1 except one oreo based rom. I have to compile the kernel for it and find out if 60+ hz is really working and how to succesfully implement a toggle option for it. Since im new at this it might take some time without help but its something I want to impliment.
The Xz1s Display obviously is really underperforming in non Sony roms without the "Bravia engine" (colour apperence) imo compared to other open roms. I tried the Bravia magisk module but could not see any difference (also did not checked what it should do at system level).
So if someone has more knowledge feel free to share
I compiled a Kernel from here and modified:
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar-base-sde.dtsi
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar-sde.dtsi
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar.dtsi
(changed 60hz to 90/120hz).
How can I check if the Panel really is working under those frequencies and if other steps are needed?
When compiling I got an Error with drivers/staging/wlan-qc/qcacld-3.0 -> so i removed them from drivers/staging/Kconfig (So apparently no Wifi).
These are the Kernels (boot):
90Hz
*Update 29.05. I Fixed Wifi for the 120Hz version. link in first post
Camera seems to work without problems (also Raw) so I guess there is something wrong with the precompiled Sony Kernel.
Also the Sony bootlogo is not present (no artifakts??)
And again. Flash at own risk.
What about the version for two SIM cards?
Model G8342.
Your rom works perfect on my phone, thanks dev.
Btw, doesn't it support Treble? I cannot boot any of the GSI roms on the forum...
Riskypedia said:
Your rom works perfect on my phone, thanks dev.
Btw, doesn't it support Treble? I cannot boot any of the GSI roms on the forum...
Click to expand...
Click to collapse
It should support Treble.
Maybe you also need to flash "Disable DM Verity" and "Magisk" after
Can be used on G8342 ? ?
Sent from my Sony Xperia XZ1 using XDA Labs
celeron1 said:
I compiled a Kernel from here and modified:
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar-base-sde.dtsi
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar-sde.dtsi
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar.dtsi
(changed 60hz to 90/120hz).
How can I check if the Panel really is working under those frequencies and if other steps are needed?
When compiling I got an Error with drivers/staging/wlan-qc/qcacld-3.0 -> so i removed them from drivers/staging/Kconfig (So apparently no Wifi).
These are the Kernels (boot):
90Hz
120Hz
Camera seems to work without problems (also Raw) so I guess there is something wrong with the precompiled Sony Kernel.
Also the Sony bootlogo is not present (no artifakts??)
And again. Flash at own risk.
Click to expand...
Click to collapse
Can i use this kernel with stock sony rom? (Existenz patched btw...)
ΒΕΓΑ said:
Can i use this kernel with stock sony rom? (Existenz patched btw...)
Click to expand...
Click to collapse
The Kernel is for AOSP (Linux kernel 4.9) so normally it shouldnt work with the Stock Firmware but i dont know if it works with the patched Existenz rom.
therma.cpp said:
What about the version for two SIM cards?
Model G8342.
Click to expand...
Click to collapse
Its for the single Sim.
Im not satisfied with the current State but I can build a dual sim version as well. (Building on hdd due to small SSD so it might take a while)
Screen is not responsive (SOV36). Any suggestions?
update: not the rom. tried to flash different rom and same result.
sinkoo1979 said:
Screen is not responsive (SOV36). Any suggestions?
update: not the rom. tried to flash different rom and same result.
Click to expand...
Click to collapse
Does it respond different while charging?
Is the screen properly clean?
Try flashing the last stock rom > same result?
If not try flashing any gsi > result?
Then full cfw flash + sw binary.
And do factory resets before flashing.
Hoping for the best. Not sure how and if the SOV36 model differs from the rest
celeron1 said:
Does it respond different while charging?
Is the screen properly clean?
Try flashing the last stock rom > same result?
If not try flashing any gsi > result?
Then full cfw flash + sw binary.
And do factory resets before flashing.
Hoping for the best. Not sure how and if the SOV36 model differs from the rest
Click to expand...
Click to collapse
no
yes
no
did not work
works with stock
sinkoo1979 said:
no
yes
no
did not work
works with stock
Click to expand...
Click to collapse
Dis you try one of these GSIs and did you flash the SW-Binaries after?
How "non responsive" is it? Laggy/Not at all/Ghost touches etc.?
Since this is off-Topic i will delete this message after you read it. You shuld open a new Thread where the Problem could be discussed.:good:
celeron1 said:
Dis you try one of these GSIs and did you flash the SW-Binaries after?
How "non responsive" is it? Laggy/Not at all/Ghost touches etc.?
Since this is off-Topic i will delete this message after you read it. You shuld open a new Thread where the Problem could be discussed.:good:
Click to expand...
Click to collapse
Nothing at all
sinkoo1979 said:
Nothing at all
Click to expand...
Click to collapse
Try flashing a oreo based stock rom.(or if you only tried oreo then pie), then flash gsi etc
ΒΕΓΑ said:
I would marry if you turn 60fps to 90-120-144 omg plz plz
Click to expand...
Click to collapse
don't you think it would be the least manner to put some pics of your ass when you come around with "marrying-for-asking"? XD :silly::silly: