I just flashed Lokifish's EnSec + Operative 20140318_v2 and everything was successful, Then I installed some of Google services and shut off the watch. Not sure if its a hardware button issue that won't allow me to turn on my watch.
When I plug it into the charger, the battery turns on and appears to charge it. Is there some kind of method to turn the watch on or does anyone have any ideas how to turn it back on?
Thanks!
How did you try install Google Services?
neokwlx said:
I just flashed Lokifish's EnSec + Operative 20140318_v2 and everything was successful, Then I installed some of Google services and shut off the watch. Not sure if its a hardware button issue that won't allow me to turn on my watch.
When I plug it into the charger, the battery turns on and appears to charge it. Is there some kind of method to turn the watch on or does anyone have any ideas how to turn it back on?
Thanks!
Click to expand...
Click to collapse
Sorry it works again -_- feel like a n00b and can't delete...
Related
After an upgrade to dcd latest ROM 2.2.6 and Radio I have found that when my phone sleeps or I turn it off it doesn’t always turn back on I need to soft reset it. I am even tried an earlier Rom version 2.2.1 and still the problem.
This is a Telecom New Zealand phone and as for normal practice they don't give out their Rom's so I can't just flash back
With some playing I think I have tracked it down to only causing this issue when my data push is enabled ie, don't sync up to an exchange server and the phone works fine.
I am aware from other posts there are others out there with the same issue, can you check if this is the same with your phone. Turn off all your data connections and delete your exchange server and see if you phone then behaves.
I know people are saying it could be the Bootloader but if the above is the cause then I don't think it is in the loader and maybe dcd can help us track it.
I have tracked this problem down to when activesync does a Microsoft Direct puch while the phone is in standby. To connect to our work's mail server we need to also create a VPN connection (not using SSL) as long as I put in a wrong name or password causing activesync never to be able to sync then the power button turns the phone on everytime. If I also connect and sync (while phone is on) then dissconnet my VPN and and change password then the phone still works fine.
Does anyone has any idea where I should be looking, as I would like to have my Direct push email working.
Sorry to jack your thread, but I have a very similar problem. Sometimes when my phone goes on standby when I'm on the phone and my conversation is finished. I cant power back on my phone either. The green light still flashes, but the power button does nothing! Anyone have that same problem?
I've also had this problem. When I press the power button the phone would enter standby mode and when I pressed it again it wouldn't wake up. The only way around it I found for my phone is to install S2U2 and set it so it activates when the backlight turns off. That seems to catch it before it whatever happens to not let the phone wake up happens. So now when I press the power button, the screen cuts off and S2U2 opens. Hope this helps.
I have similar problems. Maybe I'll try using S2U2 ...
Same problems, doesn't seem to wake up if it goes to sleep while VPN is running... any fix?
I had the same issue when I flashed my ROM with the USB connection. It could be the bootloader. because I then used the SD card bootloader and re-loaded my ROM from the SD card and it resolved the issue.
I would recommend reinstalling from the SD card using the no2chem.
Hello everybody,
I was playing with SWApp Link when suddenly my watch restarted by itself and got stuck in the Omate TrueSmart logo... I can't turn it off and it's getting hot... isn't a way to restart it like a smartphone?? I don't have the screwdriver with me so I can't pull the battery off, and also I want to avoid that because of the warranty...
Any ideas?
Connect it to adb, type "adb reboot" in a command console.
I left home with the watch fully charged so I didn't bring the charger either...
I guess I'll have to wait until it dies or I arrive home and try to reboot it using adb... the thing is I already tried once to connect it to my Mac and see if adb recognized it but had no luck...
EDIT: Finally, battery's dead... I'll charge it once I arrive home... two days with my TrueSmart and already got a freeze... disappointing...
If that happens again, see if you can get a log while it hangs there with "adb logcat > ts1_freeze.txt"
I'll do that, thanks for the advise.
I now have a worse problem... My Bluetooth isn't working... I turn it on and it turns off immediately, I mean, I barely can see the switch changing from OFF to ON when it changes back to OFF.
Sent from my GT-I9300 using XDA Premium 4 mobile app
Go into settings, disable quick boot under accessibility, and reboot.
This is actually a bug introduced in 4.2.2 and usually requires you to wipe cache to clear it out.
Thanks! :cyclops:
Should I enable it again? What is it for?
BeRniTo said:
Thanks! :cyclops:
Should I enable it again? What is it for?
Click to expand...
Click to collapse
Just keeps the device in hibernate for quick startup. If drivers crash, they can't be recovered without a power cycle.
Hello everyone,
My Bluetooth won't turn on. I turn it on and it turns off immediately.
The TS and my phone were paired and suddenly I stopped getting my sms's on the TS so I disabled SWApp Link and enabled it again, but noticed the Bluetooth was off, so I tried to turn it on without luck.
What can I do?
I have stock ROM and didn't root nor anything.
EDIT: Thanks tu kuronosan, I could fix it:
Go into settings, disable quick boot under accessibility, and reboot.
This is actually a bug introduced in 4.2.2 and usually requires you to wipe cache to clear it out.
Click to expand...
Click to collapse
In sum, earlier today I was using my phone with no problems-- calls, texts, using apps etc. I went to 'close my screen' when I was done using it and I realized the side power/lock screen button was not working and my screen was not responding when I wanted to lock it. I removed the battery hoping it would reset the phone and fix what was wrong but now my phone will not turn back on. I plugged the phone into the wall for at least 30 minutes as well as plugging it in the computer for quite some time. No response from the phone at all. (no charging icon, computer is not detecting the usb cable when plugged into computer, etc.)I also held the buttons down to try to power on as well.
I was wondering if there was a way to fix this problem, or somehow retrieve files (mainly pictures) from the phone,
Thank you for your help. Any feedback will be greatly appreciated.
Andrew
samsungs424 said:
In sum, earlier today I was using my phone with no problems-- calls, texts, using apps etc. I went to 'close my screen' when I was done using it and I realized the side power/lock screen button was not working and my screen was not responding when I wanted to lock it. I removed the battery hoping it would reset the phone and fix what was wrong but now my phone will not turn back on. I plugged the phone into the wall for at least 30 minutes as well as plugging it in the computer for quite some time. No response from the phone at all. (no charging icon, computer is not detecting the usb cable when plugged into computer, etc.)I also held the buttons down to try to power on as well.
I was wondering if there was a way to fix this problem, or somehow retrieve files (mainly pictures) from the phone,
Thank you for your help. Any feedback will be greatly appreciated.
Andrew
Click to expand...
Click to collapse
Did you try to boot into download mode?
1057
michaely123 said:
Did you try to boot into download mode?
Click to expand...
Click to collapse
I attempted to hold volume down, power and home buttons but the phone did not respond. The computer is also not recognizing it while plugged in via usb. The button does not seem to be 'stuck' as i can still hear a slight clicking sound when I press it.
Try removing the battery and hold power down for 30 seconds and then try installing the battery again.
Try that ^
maybe a jig might help
Hi! Suddenly the screen on my new A52s is totally dead.
So it's gonna need repair or replace under warranty.
Before I send it in I need to wipe it using the Android find device service.
Problem is it cannot find the A52s. And I don't know if it's turned on or off since the screen is broken.
How do I turn it on and know it's on?
Will the find service find it even if it's turned on but not logged in, which probably will be the case if I manage to boot it.
The device is all stock.
Thanks in advance for any help!
Does it vibrate as you pressing the power button?
Zdrawko0o said:
Does it vibrate as you pressing the power button?
Click to expand...
Click to collapse
Yes. And I can see a weak flickering on screen but not so I can see icons / text.
I have also tried connecting it via USB to my pc and both phone and pc makes a plong noise.
But the phone is not shown in Windows explorer.