Hello everyone,
My Bluetooth won't turn on. I turn it on and it turns off immediately.
The TS and my phone were paired and suddenly I stopped getting my sms's on the TS so I disabled SWApp Link and enabled it again, but noticed the Bluetooth was off, so I tried to turn it on without luck.
What can I do?
I have stock ROM and didn't root nor anything.
EDIT: Thanks tu kuronosan, I could fix it:
Go into settings, disable quick boot under accessibility, and reboot.
This is actually a bug introduced in 4.2.2 and usually requires you to wipe cache to clear it out.
Click to expand...
Click to collapse
Related
Hi all,
I have problem with BT HF lately. When my i9100 connect to the handsfree, it partially freeze. The only thing I can do is to extend notification menu. When i turn off the screen with power button and turn it on, it becomes very dimmed. After a minute or so it makes kind of hot restart - every app starting again.
It started to happen after the rom upgrade from stock 4.0.3 to 4.0.4 (XWLPW).
Does anybody know, what can cause this?
hbr7 said:
Hi all,
I have problem with BT HF lately. When my i9100 connect to the handsfree, it partially freeze. The only thing I can do is to extend notification menu. When i turn off the screen with power button and turn it on, it becomes very dimmed. After a minute or so it makes kind of hot restart - every app starting again.
It started to happen after the rom upgrade from stock 4.0.3 to 4.0.4 (XWLPW).
Does anybody know, what can cause this?
Click to expand...
Click to collapse
u can try this ma8.
go to settings>apps there under ALL tab find the bluetooth app, delete Data/cache of the same, then reboot ur phone and try connecting the BT HF again and see
the sineost
Sun90 said:
u can try this ma8.
go to settings>apps there under ALL tab find the bluetooth app, delete Data/cache of the same, then reboot ur phone and try connecting the BT HF again and see
Click to expand...
Click to collapse
Unfortunatelly it gave nothing. Nevertheless, I found it happens only during contacts/call history sync. There is no freeze when I deny sync prompt.
I just flashed Lokifish's EnSec + Operative 20140318_v2 and everything was successful, Then I installed some of Google services and shut off the watch. Not sure if its a hardware button issue that won't allow me to turn on my watch.
When I plug it into the charger, the battery turns on and appears to charge it. Is there some kind of method to turn the watch on or does anyone have any ideas how to turn it back on?
Thanks!
How did you try install Google Services?
neokwlx said:
I just flashed Lokifish's EnSec + Operative 20140318_v2 and everything was successful, Then I installed some of Google services and shut off the watch. Not sure if its a hardware button issue that won't allow me to turn on my watch.
When I plug it into the charger, the battery turns on and appears to charge it. Is there some kind of method to turn the watch on or does anyone have any ideas how to turn it back on?
Thanks!
Click to expand...
Click to collapse
Sorry it works again -_- feel like a n00b and can't delete...
I have this problem on my samsung galaxy s3 (i9300) when I try to start the bluetooth it stays in the state turning on for a while and then it stops trying and goes off. Do you guys have any suggestions?
Bump.
Factory reset, then flash latest stock firmware with Odin.
If still the same then it is hardware.
Hi guys.
I have a similar problem. I already tried a bunch of different ROMs and even stock that came with the phone and cant seem to make it work.
It paired successfully with a headset but it doesn't connect to it at all. When I turn discovery on it stays on for 10-15 secs and than bluetooth turns off and back on.
Sending files is a no-go also.
Is there any way to make sure its hardware issue? Is it really common that bluetooth chip dies?
I found the solution. I had tried factory reset, flashing other roms and clearing cache none of this stopped my bluetooth from turning off by itself.
I have to turn off wi fi go to task manager clear cache and then I can start bluetooth normally. I think this is a hardware isaue becouse the wifi and bluetooth are in 1 chip. This is just a workaround so you can use your bluetooth
mitko25522 said:
I found the solution. I had tried factory reset, flashing other roms and clearing cache none of this stopped my bluetooth from turning off by itself.
I have to turn off wi fi go to task manager clear cache and then I can start bluetooth normally. I think this is a hardware isaue becouse the wifi and bluetooth are in 1 chip. This is just a workaround so you can use your bluetooth
Click to expand...
Click to collapse
Hi. I have the same issue. Wireless is working but Bluetooth cannot be started.
Can you tell me where you cleared the cache? (step by step?)
Can it also have something to do with the Kernel?
Hi all!
Im sorry if its already been posted but I didnt see it. I, regretfully, followed the prompt to update to 2.0. Its awful and ruined my watch!! NO longer can I get notifications (ive checked the settings, uninstalled android wear and reinstalled, toggled bluetooth, connected and disconnected from the watch, master reset the watch, and powercycled both.). 2.0 is complete garbage!!! any ideas on how to roll it back to the 1.2 OS??? THank you in advance for all your help and im sorry if its already been answered!!
Thank you!!
No there isn't
Sent from my m1 note using Tapatalk
are a lot of other people having this issue of notifications?
found any solution?
unfortunately here is the same mate did u find any solution?
well yes actually.
Do a disconnect and reset.
Forget the watch in the phone wear app.
Go through the reconnect procedure, BUT disable mobile data and get ready to disable the wifi on your phone.......
When the watch says "searching for updates" during the re-pairing procedure TURN THAT WIFI OFF on your phone so it cannot get to the updates.
Once the watch is setup, go to the settings on the play store of your watch and turn off auto updates.
Turn the data back on on your phone. You will have to update the play services on the watch for your apps to work, BUT you don't have to update from Android wear to Wear OS, and you can keep the stock look and feel!!
(found whilst trying to get to the bottom of the battery meter lying to me)
Tried doing a factory reset and wiping cache from recovery. Tablet functions perfectly fine after reset except for any attempt to turn on wifi or bluetooth just leaves it spinning still it goes back to off. On the settings screen it just has disabled under both.
InspecterJones said:
Tablet functions perfectly fine (after reset) except for any attempt to turn on wifi or bluetooth just leaves it spinning still it goes back to off. On the settings screen it just has disabled under both.
Click to expand...
Click to collapse
I am having the exact same problem but without the reset. One day WiFi and bluetooth just turned off without any changes to the software. I just couldn't turn the Nexus on after a couple of days on the charger, screen was black. I switched it on by long pressing the power button, it booted and there was no more WiFi or bluetooth.
I tried different ROMS (Slim, Lineage) and also went back to stock with factory image, still cannot turn on WiFi or bluetooth.
Did you find a solution or is it a hardware fault?
Best, Bernhard
InspecterJones said:
Tried doing a factory reset and wiping cache from recovery. Tablet functions perfectly fine after reset except for any attempt to turn on wifi or bluetooth just leaves it spinning still it goes back to off. On the settings screen it just has disabled under both.
Click to expand...
Click to collapse
I'd reflash the ROM. Usually, this happens if the kernel doesn't match the ROM or if you dirty flash ROMs