Related
Just to let you know that I bought the Brando Screen Protector for the Diamond2 from Inkino. They even installed it for me which is a bonus. The screen protect is absolutely amazing and is a good as any that I have seen. Do not scrimp on cheap nasty ones that come in multiples in a pack. You only ever need one good one. The Ikino guy showed me a Treo 650 which had a Brando Screen protecter that he had installed when the Treo 650 came out (was I born then ) and it was in a very impressive state. If you are going to install it yourself then they do recommend doing it very slowly and cleaning the screen before-hand is crucial. Common sense I know, but you would be surprised how easy it is to get dust under the protector.
got mines today. 2 pcs, both from Brando. one is the Ultra Clear version.
i've applied the "normal" one for now and i must say it's really cool!
putting it on went pretty much smooth. in the bathroom, where i guess there's less dust, i've cleaned first the screen with a special lotion. then waited until it dried up, after that applied the Brando screen protector as shown in the "instructions".
went OK, only had to start again 2-3 times, then found the right position. went over it with a credit-card while smoothing it out on the D2's screen. it sits very good, no air bubbles and really just a few very small dust pieces at the border of the protector - does not disturb.
so, yes, the Brando screen protectors are really the thing!
now i want only the textured back plate and then i'm really happy!
PS: didn't find the screen-protectors on the romanian market, so had to order them from speedshop.hu (hungary), but eveything went very smooth! in 2 days after the payment
Could you post pictures for me? I'm looking for a screen protector too. Does it cover the whole black part, or just the 3.2 inch screen part?
it covers the display + the black border around. it's actually identical in size with the one delivered in the stock package, the difference in the aspect being the "U" shape around the front camera (the original one is a circle).
I don't get it, mine came with a screen protector.
I think it is quite a good protector,
why are you intersetd in th ebrando protector, didn't yours came with a protector as well ?
well0549 said:
I don't get it, mine came with a screen protector.
I think it is quite a good protector,
why are you intersetd in th ebrando protector, didn't yours came with a protector as well ?
Click to expand...
Click to collapse
yeah, i know. the problem is that i didn't pay enough attention when putting on the screen protector that came in the box and i messed it up (got dust and airbubbles under the protector), so after i've tried to get it clean, i messed it up so bad that it got useless.
this is why i ordered 2 brando's (speedshop.hu has 2 versions) - put on one that is not the "ultra clear" version and now i am happy with it.
When applying the standard screen protector that comes wit the phone, how do you get the screen free from greasy finger prints? If I wipe it with a cloth I just smear it out
Laban said:
When applying the standard screen protector that comes wit the phone, how do you get the screen free from greasy finger prints? If I wipe it with a cloth I just smear it out
Click to expand...
Click to collapse
Use CD/DVD cleaner
I use those: 3M Vikuiti DQC160
http://www.3m-displayschutz.de/dqc160
Scratchproof, crystal clear and very easy to get on and off.
Is a screen protector really important? I used mine, but the dust freaked me out. Can't place it without any dust...
So I removed mine, and now not using anything. Just bought a case.
What do you think?
loadstone007 said:
Is a screen protector really important? I used mine, but the dust freaked me out. Can't place it without any dust...
So I removed mine, and now not using anything. Just bought a case.
What do you think?
Click to expand...
Click to collapse
You should put one, if it is not too late: once your screen is scratched (and it will get scratched, very fast if u use the stylus), you will have to buy a new screen cover (I think it include the digitizer), which will be much more expensive, or live with scratches which will blemish your screen, which are especially bad with TD2: the very high pixel density will cause moiré pattern (rainbow effect) around the scratch and I find that very annoying...
It is not so hard to install, mine was my first attempt at installing a screen protection, and it went flawlessly: just be careful, do not hurry, do not put your fingers on the screen (once cleaned) nor on the sticky face of the protector, and work in a clean, dust free, well lit room. Dust free is hard, but an excellent trick i did found here was to use your bathroom, after a hot shower (keep the water runnnig a long time, and take a shower yourself ) It will ensure YOU are dustfree ;-), but also, more important, water condensation will remove almost all particles in suspension, and you will get very clean air. BTW, better to wear minimal clothes after your shower: clothe fibers is the most common dust/particles....
If you work in such a place, the only difficult thing is to get the screen protector perfectly aligned. I started on the top, got the grid and camera holes aligned, tried to cover the screen from top to bottom, and restarted as soon as I saw the slightest misalignment without letting the screen protector out of my hand (else it is very difficult to repick - that was the only trouble I had after I was too enthusiatic and let it go while there was still a small misalignment.
If you keep calm, and have good hand coordination, 2 or 3 attempts and you will have an invisible screen protector ;-) Oh yes, and start with a clean screen (I cleaned mine with distilled water and a soft microfiber glass cleaning tissue...worked very well....)
Thanks, I'll have to buy one then.
BTW, does a screen protector affect the sensitivity of the screen? Do you have to press slightly harder on the screen to get it to recognize your finger?
loadstone007 said:
Thanks, I'll have to buy one then.
BTW, does a screen protector affect the sensitivity of the screen? Do you have to press slightly harder on the screen to get it to recognize your finger?
Click to expand...
Click to collapse
slightly, yes....on the other hand, it is more slippy, although not enough for my taste when using fingers, but it is an improvement compared to the bare screen. Before I installed the screen protector, it was much too grippy for confortable finger sweep motions imho (clean screen, after a while finger grease act as a lubricant ;-) ).
All in all, weighting the slight decrease in sensitivity against the friction reduction...I prefer my screen with the screen protection, even taking out the protection factor
There's this Zagg product for the TD2, which is invisible. Not really sure about this... I might just get the regular screen protector, and use a silicone case.
I would recommend placing the bottom edge of the screen protector up against the bottom buttons to align it. I managed to get it perfect first time.
I find the supplied screen protector picks up finger prints even worse than the bare screen. Are the after market ones any better?
My reseller did the protective screen installation for me. Did a good job. Did you guys get the free pouch also? I am not sure if the pouch came with the unit or if it was a free gift as a promotion.
What's the difference between different brands of protectors and the original HTC ones? I bought last week branded HTC protectors made exclusively for Diamond 2, their HTC part nr is SP P240, they fit fantastically well.. Are they worse than brands mentioned earlier in the thread?
cassper1 said:
What's the difference between different brands of protectors and the original HTC ones? I bought last week branded HTC protectors made exclusively for Diamond 2, their HTC part nr is SP P240, they fit fantastically well.. Are they worse than brands mentioned earlier in the thread?
Click to expand...
Click to collapse
Those look the same as the orignal, that came with the device.
cassper1 said:
What's the difference between different brands of protectors and the original HTC ones? I bought last week branded HTC protectors made exclusively for Diamond 2, their HTC part nr is SP P240, they fit fantastically well.. Are they worse than brands mentioned earlier in the thread?
Click to expand...
Click to collapse
May be they have some particular features such as "antiscratch" or "washable screeing protector"!
I have also recently bought original one SP P240 and very glad with it!
And never mind, original parts are not worse than other brands!
Well, for the benefit of the community, I thought it'd be nice to share my experiences with some screen covers.
I received the phone from a friend with ghost armor on it, but it had some indentations and weird spots on it so I went to the kiosk to have it reapplied for $5. I turned on the phone, and there is a big piece of dirt AND a hair under the screen, pissed me off because I had to go all the way back to the mall to get it reapplied again. The second time it seemed alright, but liquid "hazing" he said would go away never went away, which was also angering. I ordered ZAGG invisible shield, since they were having a 75% off sale for screen only. They sent me one, but it was really odd. They sent me one that was cut to cover the buttons, which makes no sense because the buttons aren't touch sensitive, you have to press them, which would cause air bubbles and deformations in the cover. Sure enough it did, I don't know why they designed it to cover the buttons, which aren't level with the screen at all times. I did my best to just cut the bottom portion off so it wouldn't cover the buttons. It worked enough, it doesn't look pretty, with pretty jagged edges, but at least the screen area itself has no irregularities. There are still a couple of vertical scratch marks I can see on a white screen, from the squeegee i'm guessing, so I'm hoping that those will go away in the next few days.
The whole screen protector covering the buttons also caused some issues with the liquid solution getting into the phone, and my home key stopped working for a few hours, but it seems to have come back, I was panicking there for a bit.
I had a ZAGG invisible shield on my g1 before it finally gave out, and ghost armor seemed to scratch easily, I always got dents and malformations imprinted on it within a few days. With the invisible shield I can take a key to it, and it won't scratch. I actually did this with my g1 as a demonstration. I think they have modified the material to glide more smoothly since my g1, so it's not AS resistant, but I'm pretty sure it'll be stronger than ghost armor was.
If you DO get invisibleshield though, cut the bottom off to make it flat, it will screw up your buttons otherwise. Also, with my experience and others' that I have read, applying it yourself ends up being better quality.
As for the "orange peel" thing, you can see it if you look at the reflection, but I can't feel it. That might be because I play guitar and have thick calluses on my fingertips, but I don't notice it when I touch the screen.
Ghost armor seemed to be better resistant to skin oils and smudges as well. My experience has been better with ZAGG though.
Personally I use the Mirrored Finish protector from Wireless Emporium online and after 4 months I simply clean it a couple times a week when I'm bored. Though I do have a clear one on order from them because the Mirrored Finish does darken the screen some and causes some refraction issues with some colors. I'm fairly rough with my phone and have no scratches after about 4 months of use. It is fairly fingerprint resistant but I do have kids and get odd stuff on my hands now and again.
Oh, and the protectors here don't overlay the buttons on the bottom at all.
kudos on the zagg shield i work at best buy and use that cover on my stuff. i just got a generic cover and cut out to match the screen of my slide but yes it is good stuff
Does it really help to have a screen protector on STR? My nook is always inside a case, and always have some finger smudges on the screen, which does not interfere with reading the screen content.
Would it make the screen harder to use, such as in a resistive screen? I know it has IR technology, not resistive lcd, but it is good to know...
I have a screen protector, because I have cats and dogs who're lurking around my nook, and I'd hate to see them scratch the screen. I'm not using any case for it. The film does not affect the touch sensitivity in any way...
thanks for the info, emarusceac.
I can see dogs and cats and stuff being a problem. I just have an old NC sleeve laying around that works. If you can stand the wait, ebay is cheap Turns out the NC and NST width is the same...
emarusceac,
what sort of screen protector are you using?
Hi mh127,
I'm using a basic anti-glare screen film from ebay.
The nst is the first touch screen I have not used one on.
It is perfect now, the matte should hide small scratches, it gets used more lightly than phones/tablets, it is light (less damage if dropped), and it is cheap!
I am going to buy one.
I must warn you that it's VERY hard to apply it smoothly. I mean you'll get some air pouches caused by small particles, those bubbles won't go away no matter what you do. I prefer bubbles to permanent scratches though....
emarusceac said:
I must warn you that it's VERY hard to apply it smoothly. I mean you'll get some air pouches caused by small particles, those bubbles won't go away no matter what you do. I prefer bubbles to permanent scratches though....
Click to expand...
Click to collapse
I ordered one. Was concerned that it would be tough to apply because of the high frame around the screen. Any tips how to apply well? You use a credit card to smooth the film down over the screen?
Oh one more thing. Has anyone tried removing one? Does it change or damage the screen in any way?
I have had several different screen protectors on my NST and none of them caused any damage when I removed them. I would note though that I have read that you must not apply a screen protector to the Glowlight, something about the built in screen protector and its light guide properties. I would also point out the one reason my NST has had multiple screen protectors is because they are so hard to apply without getting bubbles/lint between the screen and the film. The film I have on now I finally got applied without any bubbles/lint in the reading area, so it will hopefully be on there for a while. Make sure you are working in a CLEAN area and take great pains to get it lined up straight before actually applying it to the screen.
The NST doesn't need a screen protector, it really wont do much for the device, but if you really feel like spending the money for it go ahead.
The NSTG already has a protector built in, putting an extra one on would be like putting on an extra pair of latex gloves. It'll offer a little more protection, but it can get to be quite frustrating in terms of lost control. It's advised not to bother with a protector for the NSTG.
Personally unless you know you're going to have your NST in reach of creatures with claws, or lose objects with sharp edges the protective screen will do little for you. Even in those cases it's possible the screen would merely lessen the damage done rather than prevent it out right.
In regards to the NSTG and it's pre-installed screen protector, has anyone actually removed it? I've read lots of reports of people complaining about minor scratches and finger pressure marks causing the light to become very strong on those parts, wondering if removing the screen protector would fix that or whether it's instead a problem with the screen.
Xadious said:
In regards to the NSTG and it's pre-installed screen protector, has anyone actually removed it? I've read lots of reports of people complaining about minor scratches and finger pressure marks causing the light to become very strong on those parts, wondering if removing the screen protector would fix that or whether it's instead a problem with the screen.
Click to expand...
Click to collapse
They claim there is one, I claim they lie as there is no visible edge of one. If there was you wouldn't get the light flares from minor scratches. Adding one may protect the screen but no idea what it would do to the light guide properties of the screen. If you ever have to remove it I'd worry what would happen to the light guide layer.
Because gadgets capabilities/sppecs increase rapidly & prices drop fast too, unless it's expensive I forget about screen protectors if the device is cheapish (got mine cheap) & if it will be outdated in a couple of years. Specially if it's not an outdoor device like my phone. Or if the protector hampers speed / functionality to some degree. Also personally I rarely scratch tab screens unless it's a phone, my phones/tabs all have protectors put on from day one, but not doing my NTSG. YMMV.
Do you think it's safe to be without screen protector on OP5?
Sure it's safe as long as you don't mind the eventual tiny scratches or never drop the phone where the display hits a surface hard enough to crack. I use a screen protector mainly to avoid the inevitable tiny scratches (never completely rely on Gorilla glass) and on the off chance it helps in a direct display hit.
Its all up to you but I never fully trust a bare display as I've gotten burned by the tiny scratches on previous devices. Plus a non-scratched display helps with resale value.
Depends on the case you use, if you use no case then no, if you use a case with a decent lip protection then yeah.
I wouldn't recommend it. I removed the SP on mine because i felt like it was getting too many scratches and losing sensibility and Gorilla Glass 5 was fine for normal usage. I totally regret it because now i have a lot of small scratches and one very noticeable on the bottom, and I take good care of my phone, the worst thing now is to find a good and cheap screen protector, not even the plastic one come close to the one installed.
Yeah remove it.... The quality of the screen protector is crap. Here using a OnePlus 5 without case and without screen protector. Not a single scratch. Day one user.
Remember to put the phone alone in your pocket. And select the type of pocket you put it in.
I had a similar question and people had some insightful answers here:
street_samurai said:
My question is: do I need a screen protector?
Click to expand...
Click to collapse
Apparently the GG5 is not as strong in scratch resistance as GG2. The op5 will scratch easier if you were coming from a oneplus one.
Every phone I've had got scratches eventually except for the Nexus one lol. I haven't gotten any on my oneplus 5 yet. I had three screen protector on all but maybe a few days total. Because I'm always shoving my phone into the dirty chest pocket of my florescent work vest, there is going to be sand and dirt occasionally getting on the screen and that will likely scratch it eventually.
using a Spigen case along with the preapplied screen protector that came with the phone itself
Attached are the photos of the 6T solid suit and the impact screen protector that I just installed this morning. The solid suit feels amazing and the screen protector is film and feels like glass, but is definitely not glass, just so there is no confusion there. It does seem to go from left edge to right edge completely and where I placed it seems to cover the entire screen top to bottom. The slider on the case really works and the buttons are fantastic; smooth and clicky, not at all hard to press. I love both and I'm glad I got them ordered on Black Friday now because two protectors and a case was not inexpensive but they are both super high quality and way more affordable than the glass one from T-Mobile so I'm happy with my purchase. If you have any questions I'll try my best to answer them!
Also, don't mind the doggo, she likes being in pictures.
Can u tell me how the side buttons are? Are they still clicky? Or are they mushy like the stock case that comes with the phone....
And how's the slider button? Is it flimsy?
lemonspeakers said:
Can u tell me how the side buttons are? Are they still clicky? Or are they mushy like the stock case that comes with the phone.... Nn
And how's the slider button? Is it flimsy?[/QUOTENnnnn n N
The buttons are great, I handed someone else my phone so two people could verify that they are very clicky and easy to push. The slider has some play in it up and down but it does work correctly when it hits the slider on the device. No issues with functionality at all this is a really great case.
Click to expand...
Click to collapse
I tried crashguard on op6 and hated it. I think I'll like the solid suit better. Thanks for the pics. Screen protector is intriguing also, seems very clear....
Thankfully I waited I can get the print backs now. Just waiting or one particular one to be available
Is the screen protector you have on This one? It says "Not Full Coverage" on it... I can't see clearly on your photos how close to the edge of the screen the screen protector comes to... I had the same impact screen protector on my old Samsung Galaxy S7, and it didn't even cover the full screen on the left and right, which is the reason I didn't order this screen protector for my 6T..
how slick is the screen protector compared to the pre-applied plastic one from OP?
gregwee said:
Is the screen protector you have on This one? It says "Not Full Coverage" on it... I can't see clearly on your photos how close to the edge of the screen the screen protector comes to... I had the same impact screen protector on my old Samsung Galaxy S7, and it didn't even cover the full screen on the left and right, which is the reason I didn't order this screen protector for my 6T..
Click to expand...
Click to collapse
Sorry about the late response I'm traveling abroad. I have the impact screen protector as the tempered glass one is for the back I think. Anyway, as far as not full coverage I think what they mean is that it covers the visible screen but not the edges past that. It doesn't extend fully top to bottom either but it does cover all the visible screen space as far as I can tell; no obvious cutoff of the screen though it does require precise placement to line it up properly.
Frankenscript said:
how slick is the screen protector compared to the pre-applied plastic one from OP?
Click to expand...
Click to collapse
Much slicker definitely. Feels like glass but definitely doesn't get rid of oil the way glass does. It feels good to the touch and it is very strong as I dropped on a stool and it bounced onto a hardwood floor right after that. There was no damage to the screen, but the protector did crack so I'll replace it when I get home. It did very well holding up to direct impact on a metal stool; lived up to the hype for me.
Can u take better pictures of the screen protector again?
AlkaliV2 said:
Much slicker definitely. Feels like glass but definitely doesn't get rid of oil the way glass does. It feels good to the touch and it is very strong as I dropped on a stool and it bounced onto a hardwood floor right after that. There was no damage to the screen, but the protector did crack so I'll replace it when I get home. It did very well holding up to direct impact on a metal stool; lived up to the hype for me.
Click to expand...
Click to collapse
The impact resistance shatters? I thought it was some type of plastic film.
https://imgur.com/a/BJD1GmC
I also purchased a SolidSuit (with the lens mount) for my 6T and while I like the build material, I don't like the little details. Let me explain:
1) The back of the case has this weird look and feel like it's made from three separate medium-fiber density board with a black sticker over it. I can actually feel the transitions between the three pieces and I don't like it. See the attached picture.
2) There is a noticeable gap at the top of the phone where the back meets the bumper edge. However, on the bottom, it's completely flush. My pockets are clean, but somehow dust and small particles find its way into that tiny gap. Ugh,
3) The special lens adapter is amazing since I am now able to mount the Moment 18mm WIDE V2 lens. However, since the bayonet mount sits so far away from the camera lens, it creates vignetting. FYI: The OP6T and the OP6 share the same lens adapter. I bought both. They are labeled differently, but they are identical in every way: height, mounting point, etc. If they did this correctly, the adapter for the OP6T should be SHORTER since it does NOT have the same camera height protrusion as the oneplus 6.
https://imgur.com/a/BJD1GmC
zymphad said:
The impact resistance shatters? I thought it was some type of plastic film.
Click to expand...
Click to collapse
It didn't shatter really, it just cracked along a seam where the impact was. When I get back home in two days I'll try to get pictures of the crack and the screen protector.