Hi guys, I have an issue with the SLX v24a.
I was using the default stock lock screen till a couple days ago, when suddently, when I put my device in sleep mode, the phone started to reboot automatically and do this over and over again.
If I'm not quick to wake the device when it enters in lock screen, it start to enter this BOOT LOOP MODE
Here there is a video showing the problem, unlucky I'm talking in italian describing what i wrote in this post, so there is no need to listen me
I didn't solved the problem, but I just deactivated the screen lock for the moment.
Someone on the italian forum suggested that was some application in acctivated in Accessibility that generate the problem, but I have the following configuration from the very fiorst day i had SLX v23
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any help and solution will be appreciate
Dagon84 said:
Hi guys, I have an issue with the SLX v24a.
I was using the default stock lock screen till a couple days ago, when suddently, when I put my device in sleep mode, the phone started to reboot automatically and do this over and over again.
If I'm not quick to wake the device when it enters in lock screen, it start to enter this BOOT LOOP MODE
Here there is a video showing the problem, unlucky I'm talking in italian describing what i wrote in this post, so there is no need to listen me
I didn't solved the problem, but I just deactivated the screen lock for the moment.
Someone on the italian forum suggested that was some application in acctivated in Accessibility that generate the problem, but I have the following configuration from the very fiorst day i had SLX v23
Any help and solution will be appreciate
Click to expand...
Click to collapse
Hi. It seems to me from what i see in that movie, that you have some cleaner that cleans some system applications. Look in that cleaner and see what apps cleans. That cleaner seems to me, is the problem. Try to deactivate and see what is going on.
stympy said:
Hi. It seems to me from what i see in that movie, that you have some cleaner that cleans some system applications. Look in that cleaner and see what apps cleans. That cleaner seems to me, is the problem. Try to deactivate and see what is going on.
Click to expand...
Click to collapse
Sorry, I didn't mention that I always had the ram booster installed and working correctly.
I checked the update of Gravity Box and I noticed that I upgraded the same day I found this bug. Unlucky I don't remember if I updated it before or after the problem.
Now I will proceed to deactivate GB and Ram Booster.
Sent from my Lenovo P780 using XDA Free mobile app
Dagon84 said:
Sorry, I didn't mention that I always had the ram booster installed and working correctly.
I checked the update of Gravity Box and I noticed that I upgraded the same day I found this bug. Unlucky I don't remember if I updated it before or after the problem.
Now I will proceed to deactivate GB and Ram Booster.
Sent from my Lenovo P780 using XDA Free mobile app
Click to expand...
Click to collapse
Ok i understand. Check and tell us iff it is a GravityBox bug or conflict with your Ram Booster.
stympy said:
Ok i understand. Check and tell us iff it is a GravityBox bug or conflict with your Ram Booster.
Click to expand...
Click to collapse
Unlucky, disabling both Gravity BOX and Ram Booster, I get the reboot of the device anyway.
Really strange, because it started to happen on 3 May morning after I shout the alarm at 8 in the morning.
Any other suggestion?
Dagon84 said:
Unlucky, disabling both Gravity BOX and Ram Booster, I get the reboot of the device anyway.
Really strange, because it started to happen on 3 May morning after I shout the alarm at 8 in the morning.
Any other suggestion?
Click to expand...
Click to collapse
This is strange. I want to know something. What was your first firmware. ROW or Chinese? Did you installed this Custom ROM on clean firmware ? I installed this Custom Rom myself on other custom rom like LIFE v0.7 and i have no such problems!
Maibe you cann try to install on stock rom and it will work!
stympy said:
This is strange. I want to know something. What was your first firmware. ROW or Chinese? Did you installed this Custom ROM on clean firmware ? I installed this Custom Rom myself on other custom rom like LIFE v0.7 and i have no such problems!
Maibe you cann try to install on stock rom and it will work!
Click to expand...
Click to collapse
Well, my phone is the 4gb Chinese version, the original ROM is the one from ETOTALK with chinese Recovery.
Then i put the S116 ROW using the SP Flashtools, erasing everything, and installing the TWRP 2.5.0.0 for ROW roms.
From that point I installed the SLX 23a, then I reparted the storage in order to have 2.45 gb.
Nearly 1 month ago I updated to 24a via recovery, ereasing Dalvik Cache and Cache, but not DATA, then instaled the update.
I skipped the uptade v24, jumping directly from 23a to 24a
Everythink was fine and I had no problems at all.
Another user on the italian forum said that he had the same issue with the lockscreen, but was related to an app activated in accessibility mode (for that reason I attacched the 2 scereenshots).
------
I just cleared the Dalvik cache but nothing happens...
Dagon84 said:
Well, my phone is the 4gb Chinese version, the original ROM is the one from ETOTALK with chinese Recovery.
Then i put the S116 ROW using the SP Flashtools, erasing everything, and installing the TWRP 2.5.0.0 for ROW roms.
From that point I installed the SLX 23a, then I reparted the storage in order to have 2.45 gb.
Nearly 1 month ago I updated to 24a via recovery, ereasing Dalvik Cache and Cache, but not DATA, then instaled the update.
I skipped the uptade v24, jumping directly from 23a to 24a
Everythink was fine and I had no problems at all.
Another user on the italian forum said that he had the same issue with the lockscreen, but was related to an app activated in accessibility mode (for that reason I attacched the 2 scereenshots).
------
I just cleared the Dalvik cache but nothing happens...
Click to expand...
Click to collapse
Strange ... I dont see any app that is related to that kind of error on Accesibility options !
I know it sounds strange, but try every option there with Enable then Desable!
One more question! Why is your green led on? is any missed call or message ?
I was 2 times on rom slx v24a. when turned 3G on sim 2 used to be. Up other rom is going out : v22,v26 . I 'm using v22 after up v23a,v24a,v26
Related
Hi everyone!
Well, I live in SouthAmerica (Argentina), and I bought an unlocked AT&T Atrix 4G a couple of months ago.
When I was on the stock Gingerbread Firmware, the GPS worked Fine. But when I unlocked the phone, and started playing with ROMs, the gps stopped working.
Currently I have CM7 Weekly #4, but i previously had: Wet Dream V1.3, CM7 Ba2TF, CM7 Weekly #3, and the issue was present on all of that roms.
I tryed with the proper gps.conf configuration for my country, and a lot more, and none of them worked or improved anything. I also tryed with the following apps: Faster Fix, GPS FIx, GPS Status, and again, none of them worked.
So, I was wondering (If there isn't any other solution): Can I go back to the Official AT&T Gingerbread Firmware (.SBF file), or I will brick my phone?
If so, anyone knows where can I find that SBF? Because all the links I saw were on Megaupload, Filesonic, Fileserve, or similar, and all of them are down, or restricting the download.
Help will be highly appreciated!
cletus8 said:
Hi everyone!
Well, I live in SouthAmerica (Argentina), and I bought an unlocked AT&T Atrix 4G a couple of months ago.
When I was on the stock Gingerbread Firmware, the GPS worked Fine. But when I unlocked the phone, and started playing with ROMs, the gps stopped working.
Currently I have CM7 Weekly #4, but i previously had: Wet Dream V1.3, CM7 Ba2TF, CM7 Weekly #3, and the issue was present on all of that roms.
I tryed with the proper gps.conf configuration for my country, and a lot more, and none of them worked or improved anything. I also tryed with the following apps: Faster Fix, GPS FIx, GPS Status, and again, none of them worked.
So, I was wondering (If there isn't any other solution): Can I go back to the Official AT&T Gingerbread Firmware (.SBF file), or I will brick my phone?
If so, anyone knows where can I find that SBF? Because all the links I saw were on Megaupload, Filesonic, Fileserve, or similar, and all of them are down, or restricting the download.
Help will be highly appreciated!
Click to expand...
Click to collapse
flash a stock rom SBF file using RSD Lite should be fine. But don't go back to Froyo, any Gingerbread stock roms should be ok.
Well, i installed the SBF, and now the GPS works perfectly...
Why It doesnt work in custom Roms?
cletus8 said:
Well, i installed the SBF, and now the GPS works perfectly...
Why It doesnt work in custom Roms?
Click to expand...
Click to collapse
Hi,
Could you please try Neutrino V2. 1p rom?
There is a gps tweak in add-on.
First, flash the rom and test the GPS.
Then if it work, flash the add-on.
But for me it's another problem, it's really strange...
Do you full wipe (with fastboot) before flash?
Let me know by PM, I will not follow this thread carefully.
We will found a solution ;-)
Regards
-JFK-
I have the same problem and tried everything like the posted said above.
Running Cyanogen 7.1 on AT&T (USA)
Wish I could be more helpful, but I can at least confirm that the GPS works fine for me running cm7 weekly #6 with faux123's 1.3 kernel (on an AT&T Atrix). In flight mode (i.e., no data and thus no A-GPS or other location assistance) I can get a lock in less than 10 seconds with a good view of the sky.
I do not know if you tried reflashing your radio as discussed in the atrix-dev-team faq:
code.google.com/p/atrix-dev-team/wiki/FAQ
You say you have tried various firmwares but didn't mention what kernels you were using. If you are using the stock kernels, the faux123 or Clemsyn kernels might be worth a shot . . . obviously you need to flash the right kernel (i.e., if you are using a cm7 firmware, use the custom kernels specifically built for cm7).
If you already tried all this, well, sorry . . . give -JFK-'s suggestion a try.
tc1999 said:
I have the same problem and tried everything like the posted said above.
Running Cyanogen 7.1 on AT&T (USA)
Click to expand...
Click to collapse
I tried the Neutrino ROM GPS fix, it worked amazingly. My phone was taking forever to lock, so I flashed the United_States.zip file from the GPS fix, and it solved my problem. Used GPSFix app from the Market/Play Store to finalize it.
I'm running Ba2TF Beta 3 (CM7.1).
Again, this file is only for the United States Atrixes.
had the same problem with the phone since first day i started using custom roms,
but i managed to solve it a few days ago..... what i did was
go here
http://forum.xda-developers.com/showthread.php?t=1252011
and download the 3.x Google Specific CWM Flashable build there
or just click this direct link http://derekgordon.com/gps-files/agps.patch.google.build.cwm.v3.1.zip
flash it with CWM,
then using root explorer, go to your phone system\etc\
and open gps.conf with text editor,
with in the first few lines, u will see this
NTP_SERVER=ntp.derekgordon.com
Click to expand...
Click to collapse
there is only one NTP server,
so go to http://www.pool.ntp.org/en/
and under active servers, select your sub-continent and u will some ntp server addresses, add that to your gps.conf.
than go into your country specific link and add the ntp server addresses u found there into the gps.conf file as well.
if you follow those steps correctly, your NTP server list for gps.conf should look like this for Argentina
NTP_SERVER=ntp.derekgordon.com
NTP_SERVER=0.ar.pool.ntp.org
NTP_SERVER=1.ar.pool.ntp.org
NTP_SERVER=2.ar.pool.ntp.org
NTP_SERVER=3.ar.pool.ntp.org
NTP_SERVER=0.south-america.pool.ntp.org
NTP_SERVER=1.south-america.pool.ntp.org
NTP_SERVER=2.south-america.pool.ntp.org
NTP_SERVER=3.south-america.pool.ntp.org
Click to expand...
Click to collapse
now go stand somewhere with open sky as sometimes buildings block the gps signal so it can't get a proper lock,
cross your fingers and activate your gps and hope it works....
and don't forget to leave the gps open a few mins for the first time you activate the gps after the above steps
as i remember reading somewhere in the AGPS original post that it kinda help the gps locks faster.....
if u are geeky and wanna know how many sats ur GPS is locking on,
download this neat GPS tool https://play.google.com/store/apps/...wsMSwxLDEsImNvbS5lY2xpcHNpbS5ncHNzdGF0dXMyIl0
and see for yourself and while you are at it, u might wanna calibrate your compass for faster and more accurate GPS lock,
which can b done from (menu button)\tools\compass calibration
might as well do the 'calibrate pitch and roll' too,
but don't touch the 'manage A-GPS state' unless u know what u are doing as i have no idea what it does...
if you really wanna know how AGPS works, just go read it's original post here
http://forum.xda-developers.com/showthread.php?t=1252011
cause i dunno how it works, i just know that my gps works after flashing and tweaking it
I have also been reading that switching radios can help the gps signal lock. Might be worth your time to look into it as well.
I had this issue just the other day and i just had a setting unchecked were it wasnt useing the interal gps for the lock not sure how that happend but it fixed my problem
Pbwizkid said:
I had this issue just the other day and i just had a setting unchecked were it wasnt useing the interal gps for the lock not sure how that happend but it fixed my problem
Click to expand...
Click to collapse
Thanks.
I looked at this. I've since switched to Neutrino but same problem.
In my settings it provides the option to use internal GPS (as the only option) but even when selected the GPS source states ""use external bluetooth gps..."
Could this be the issue, that for some reason it's not detecting GPS hardware?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If there already are threads about this, please direct me to them instead of flaming. I have searched through the forums without finding anything.
I got my 10.1 WiFi about a month ago, and can't figure out why this is happening, and if it is happening to anyone else. Every ICS rom I install makes the screen flicker during boot, and it will continue to flicker until I turn off the screen, and then back on. After that there are no problems at all. I had the same issue when I install CWM recovery. I had to try 3-4 different ones, before I found one that didn't flicker.
It seems to me, that it might be kernel related, but I am not sure.
Any input is welcome.
tristan202 said:
If there already are threads about this, please direct me to them instead of flaming. I have searched through the forums without finding anything.
I got my 10.1 WiFi about a month ago, and can't figure out why this is happening, and if it is happening to anyone else. Every ICS rom I install makes the screen flicker during boot, and it will continue to flicker until I turn off the screen, and then back on. After that there are no problems at all. I had the same issue when I install CWM recovery. I had to try 3-4 different ones, before I found one that didn't flicker.
It seems to me, that it might be kernel related, but I am not sure.
Any input is welcome.
Click to expand...
Click to collapse
Same here, even 3.2 ROMs flickering for me . The only one that doesn't flick is Task ROM
tristan202 said:
If there already are threads about this, please direct me to them instead of flaming. I have searched through the forums without finding anything.
I got my 10.1 WiFi about a month ago, and can't figure out why this is happening, and if it is happening to anyone else. Every ICS rom I install makes the screen flicker during boot, and it will continue to flicker until I turn off the screen, and then back on. After that there are no problems at all. I had the same issue when I install CWM recovery. I had to try 3-4 different ones, before I found one that didn't flicker.
It seems to me, that it might be kernel related, but I am not sure.
Any input is welcome.
Click to expand...
Click to collapse
Hey man, just got this sorted out
Try to follow this http://forum.xda-developers.com/showthread.php?t=1555984
Key part is that we need to unroot our tabs with North America stock. I think our "Non-NA" stock ROMs weren't really "unlocked" that's why custom kernel won't work well on them.
Super happy now with CM9 + latest pershoot kernel + latest CWM, smooth no flickering
Happy unrooting !
Make nand backup (if recovery flickers use rommanager)
Save it to PC
Wipe everything
Flash P7510UEKMP_P7510XABKMP_XAB.tar.md5 with odin
Reboot
Wipe everything again
Flash recovery.tar.md5 with odin
Reboot
Put this http://www.shabbypenguin.com/users/s0ckm0nk3y/android/acs/galaxytab10.1/Samsung_Galaxy_Tab_10.1_root.zip to storage
Put nand backup to storage
flash the zip
Reboot
Restore nand
Finisch! You can now flash another recovery and any other rom without flicker
In fact there is no way to get the flickering back^^
Files you can get here http://forum.xda-developers.com/showthread.php?t=1555984
ive had the same rolling screen during boot, but recovered with those instructions.
now i have another kind of problem:
roms flash ok, cwm is ok, boot is ok. but when i get to the desktop, if the device goes into standby, ot if i put it in standby withthe power button, when i wake it up, again a rolling screen, but much faster this time!
anyone had this problem before?
only happens on 3.2 custom roms. on the official one its ok, on cm9 from droidbasement its ok
any ideeas?
thanks
here it is a pic of what it looks like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
any ideeas?
thank you
nobody knows?
Hello all.
I have the exact same problem as tristan202 which is
Every ICS rom I install makes the screen flicker during boot, and it will continue to flicker until I turn off the screen, and then back on. After that there are no problems at all.
I am sorry but i think that solutions bringed by "hylde" is not related to this problem but to another problem, through very similar, in clockwork recovery tool : same flickering screen.
I used the link, 2 weeks ago to solve this problem, using 5.5.0.4 version.
But the original thread problem is still unsolved. I tried other ICS roms but with same problem. I'd also like to keep root access.
Thanks to all
cobrax2 said:
here it is a pic of what it looks like
any ideeas?
thank you
Click to expand...
Click to collapse
Well, I have almost the same problem. I am on overcome's rom, and I have a screen similar to yours. It is static, not rolling and it happens only once after reboot for two-three seconds before the lockscreen. After that it is ok, even when I lock the screen. Flashed again but nothing. I haven't found anything about that. Oh well. It may be weird but I can live with it. Has anyone encountered something like that before?
Sent from my amazing 10.1 galaxy tab
I posted this in Task 14 Thread!
Edit//// In response to cobrax2's waking up from screen off!\\\\Edit
I had the same problem I fixed it like this!
The default kernel does not work for some of us, you are now one of us!
Mwahahahahahahahaha!
sorry!
Download
HC 3.2:
10.1-Wifi, Touchwiz UX (OTA, GT-P7510):
boot-cm_2636.4_ux_hc32-oc-xtra-vfpv3-d16_fp-010912.zip:
Download: boot-cm_2636.4_ux_hc32-oc-xtra-vfpv3-d16_fp-010912.zip
From
http://droidbasement.com/db-blog/?p=2479
Put it at the Root of your tab and reboot into recovery, then flash that zip file!
You should be good to go!
If not then you will have to flash back to stock kernel listed at the bottom of the second post or just re flash the Rom your choice, this will be nessesary if you flashed another kernel, Then go back and flash boot-cm_2636.4_ux_hc32-oc-xtra-vfpv3-d16_fp-010912.zip then you will be GTG!
Oh ya it took me 3 hours to figure this out for my self Your welcome! ------------------------------------------>
bugs9477 said:
I had the same problem I fixed it like this!
Click to expand...
Click to collapse
Thanks for your answer.
Which of the two problems related in this thread are you talking about ? The original (which i also have) orignally posted by tristan202 or the second one, posted by cobrax ?
Thanks
Galanthein said:
Thanks for your answer.
Which of the two problems related in this thread are you talking about ? The original (which i also have) orignally posted by tristan202 or the second one, posted by cobrax ?
Thanks
Click to expand...
Click to collapse
So sorry it was ment to be in response to cobrax2's waking up from screen off!
bugs9477 said:
So sorry it was ment to be in response to cobrax2's waking up from screen off!
Click to expand...
Click to collapse
Ok that's what i thought. Too bad for us, we still have our problem
Thanks anyway !
bugs9477 said:
Edit//// In response to cobrax2's waking up from screen off!\\\\Edit
I had the same problem I fixed it like this!
The default kernel does not work for some of us, you are now one of us!
Mwahahahahahahahaha!
sorry!
Download
HC 3.2:
10.1-Wifi, Touchwiz UX (OTA, GT-P7510):
boot-cm_2636.4_ux_hc32-oc-xtra-vfpv3-d16_fp-010912.zip:
Download: boot-cm_2636.4_ux_hc32-oc-xtra-vfpv3-d16_fp-010912.zip
From
http://droidbasement.com/db-blog/?p=2479
Put it at the Root of your tab and reboot into recovery, then flash that zip file!
You should be good to go!
If not then you will have to flash back to stock kernel listed at the bottom of the second post or just re flash the Rom your choice, this will be nessesary if you flashed another kernel, Then go back and flash boot-cm_2636.4_ux_hc32-oc-xtra-vfpv3-d16_fp-010912.zip then you will be GTG!
Oh ya it took me 3 hours to figure this out for my self Your welcome! ------------------------------------------>
Click to expand...
Click to collapse
thanks for the reply, ill try this as soon as i find a bit of free time
Regarding tristan202 and mine problem (flickering boot screen which stops when we press two times the power button), i tried the nightly builds 19/05 and 22/05 of Cyanogen Mod without solution.
Tristan i'll try 2905 nightly build and keep you in touch
Hello
I have investigated the problem for one week and found a solution for me
The Problem is the short distance of the Bluetooth audio transmission!
There are two settings file for the BCM4334 WIFI BLUETOOTH IC and it seems that it depends on the phone which is better.
For me it sadly was not the common used for CM10 nightly!
So i build two CWM files for you to test the differences.
Maybe we can find out on what it depend
I bought my S3 in Austria (the carrieris H3G) and for me bcm4334_semcosh works fine!
greetings
Patrick
Hi Patrick
So. I had i fine working BT audio streaming with cm 10. Then Changed to cm10.1. BT-connection was crap.
Flashed both of your files.
Aaaaaand: tataaa. the second one seems to work for me.
Thanx a lot!
so you are able to establish a audio-stream-connection longer than 1m?
This works for me! Used the second zip file listed (bcm4334_semcosh.zip) and it did the trick. Tried streaming some music from about 5m from the receiver, no problems at all! Thanks OP!
On CM10 I had excellend bluetooth audio streaming up to +/- 6 metre, on CM10.1 audio is (just) ok with max distance +/- 1 metre.
For who want to know, the Samsung bluetooth firmware files (bcm4334*) wrapped in the two packages in the first post are also in the CM 10.1 rom, see screenshot or browse to /system/bin/
Seems like the murata version is installed by default by CM 10.1.
I did a manual copy, rename and a reboot to try both files (e.g. to try the murata version, copy bcm4334_murata.hcd to bcm4334.hcd).
Both files give me the same performance I had already, sound is ok and max distance still +/- 1 metre.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you so much for your help. Finally I am able to use cm10.1 on my SGS3. Also for me the bcm4334_semcosh fixed the problem. I can leave my Phone in my pocket while driving.
New problem:
But now I have the problem that when i have had a call in the car I have no sound coming out the speaker when I get called or receive mail for example. The phone needs a reboot to get sound back. Cm10.1 b.t.w. Am I the only one?
pknoe3lh said:
Hello
I have investigated the problem for one week and found a solution for me
...
Patrick
Click to expand...
Click to collapse
Worked for me (semcosh), thanks so much!
Not working for me...
CM10.1 with Siyah kernel: I can't pair device. It actually asks for PIN, but no answer...
Any help, please?
gpvecchi said:
Not working for me...
CM10.1 with Siyah kernel: I can't pair device. It actually asks for PIN, but no answer...
Any help, please?
Click to expand...
Click to collapse
Try the stock CM10.1 kernel. I had the same problem, and not installing Siyah kernel fixed it for me.
Beardy
semcosh solve it for me audio Bluetooth works like a charm with Cyanogenmod 10.1. Thanks!
Hi there!
I'm on CM 10 on my SGS 3 too and have the problem of not being able to pair with my car's radio.
The two files didn't help, still can't pair.. it simply gets stuck at "Pairing.." in the Settings app.
I'm also using an austrian SGS3 (unlocked) with Siyah kernel and CM 10..
Any suggestions?
Greetings from another Patrik
fold93 said:
Hi there!
I'm on CM 10 on my SGS 3 too and have the problem of not being able to pair with my car's radio.
The two files didn't help, still can't pair.. it simply gets stuck at "Pairing.." in the Settings app.
I'm also using an austrian SGS3 (unlocked) with Siyah kernel and CM 10..
Any suggestions?
Greetings from another Patrik
Click to expand...
Click to collapse
Try stock cm kernel.
Click thanks if I've helped. Sent from my GT-I9300 using xda premium.
Thanks for reply!
Is there a way of getting it after flashing cm 10 or do i just have to reflash it?
Greetings
fold93 said:
Thanks for reply!
Is there a way of getting it after flashing cm 10 or do i just have to reflash it?
Greetings
Click to expand...
Click to collapse
Re-flash it without wiping worked for me.
Click thanks if I've helped. Sent from my GT-I9300 using xda premium.
No Cell Data
I'm using Galaxy S3 Verizon with cm-10.1-20130121-EXPERIMENTAL-d2vzw-M1
I flashed both of these files using ClockWork Mod. Neither helped my performance. I still have very poor Bluetooth A2DP audio and it will cut out after about a minute of playing.
The bigger issue I'm having is that I now get zero cell phone reception. I can't make calls, send texts, or use cell data. Wifi, GPS, and bluetooth all work. I had the phone in airplane mode when I flashed the first file, but I'm thinking that wouldn't have affected it.
Any ideas on how to get back to the original bcm4334 file?
Thanks
alongcor said:
I'm using Galaxy S3 Verizon with cm-10.1-20130121-EXPERIMENTAL-d2vzw-M1
I flashed both of these files using ClockWork Mod. Neither helped my performance. I still have very poor Bluetooth A2DP audio and it will cut out after about a minute of playing.
The bigger issue I'm having is that I now get zero cell phone reception. I can't make calls, send texts, or use cell data. Wifi, GPS, and bluetooth all work. I had the phone in airplane mode when I flashed the first file, but I'm thinking that wouldn't have affected it.
Any ideas on how to get back to the original bcm4334 file?
Thanks
Click to expand...
Click to collapse
just flash the custom rom again and the file will be overridden
pknoe3lh said:
just flash the custom rom again and the file will be overridden
Click to expand...
Click to collapse
Thanks for the reply. I actually did that and after the reboot I still don't have cell service. I even backed up all my apps and settings with Titanium. Wiped all user data and wiped cache, then flashed again. After doing the initial setup after the reboot, I still don't have cell service. I'm going to try to flash a different version of CM10.1, one of the nightly's and see if that helps any. I wish I would have done a full backup with CWM before flashing that bluetooth file
alongcor said:
Thanks for the reply. I actually did that and after the reboot I still don't have cell service. I even backed up all my apps and settings with Titanium. Wiped all user data and wiped cache, then flashed again. After doing the initial setup after the reboot, I still don't have cell service. I'm going to try to flash a different version of CM10.1, one of the nightly's and see if that helps any. I wish I would have done a full backup with CWM before flashing that bluetooth file
Click to expand...
Click to collapse
hm
yes a full wipe dont help
but if you flash CM again it is for sure overridden!
So your problem have another source.
I would guess you had flashed an other radio rom (CM dont come with Radio so new flashing has no effect on radio rom)
Also call problems are independent of the bluetooth hardware ...
I would recommend you to flash the orginal rom again and then rood again and then again flash CM but be careful as flashing is risky
greetings Patrick
Yeah I'm starting to think it was a just a coincidence that it stopped working when it did. From other threads I've found the best bet will be to indeed flash back to stock ROM and then back to CM. I'm downloading the stock ROM now found here:
http://forum.xda-developers.com/showthread.php?t=1762204
The only thing I did was flashed that semcosh.zip file using CWM though, so I'm not sure how that would have affected my radio.
Good thing it's a slow day in the office! Also, I think I'm just going to use wired headphones from now on!
---------- Post added at 03:31 PM ---------- Previous post was at 02:37 PM ----------
Just an update. I downloaded that root66.tar and flashed it with Odin. Did a full data wipe after (because it was stuck on the Verizon 4g splash screen). Still didn't have cell connection. Then did the step 2 on this page:
http://forum.xda-developers.com/showpost.php?p=35600769&postcount=2
Open the dialer and enter *2767*3855#
After it did some other sort of factory reset, I finally have cell connection again. And all before I leave work for the day.
Same issue here
Planet X said:
Thank you so much for youthe latest version available todayr help. Finally I am able to use cm10.1 on my SGS3. Also for me the bcm4334_semcosh fixed the problem. I can leave my Phone in my pocket while driving.
New problem:
But now I have the problem that when i have had a call in the car I have no sound coming out the speaker when I get called or receive mail for example. The phone needs a reboot to get sound back. Cm10.1 b.t.w. Am I the only one?
Click to expand...
Click to collapse
I have the same problem as you. When I disconnect from the car, all notification sounds are lost, BUT I've realized that you don't need to reboot. If you recieve a call to your phone (no email, sms or whatsapp, only a call will do the trick), it will actually ring and from then on, notifications go back to normal. It's not actually a fix, but until one comes out, it makes this issue a little less a pain in the ass.
Hope this helps. If anyone knows how to fix this for real then help is largely appreciated.
PS. My first custom ROM in S3 was CM10.1 nightly (the latest version available today) so I can't tell what happened before, but except for the mentioned issue and maybe a subtle loss in streaming quality, BT pairs and streams quite alright. Oh, and the media system in my car (Citröen C4) used to show artist and song name while streaming and doesn't anymore.
I bought my phone from a friend and I am the second user. It was rooted and was in modified status (when i checked About->device->status) but working fine and had zero issues. So yesterday i wanted to install a new ROM to get android 4.3 as what i had was android 4.1.2.
I installed this Omega Rom after downloading from omegadroid.co/download-center/ for my S3 I9300, omega version is v58 - XXUGNB6
Now everything is working fine except the calling feature, phone is fast as well but when i try to make a call it says not registered on network.
Which was working Fine before, similarly to another S3 I9300 of a friend the same ROM is installed and it works fine without any problem at all. Even calling is working fine.
The error message is "Not Registered on Network"
What can i do to recover my phone? Can i unroot it ? if so please appreciate any help on how to do it. What could be the issue here if anyone have a idea.
UPDATE
I have found now that IMEI (under the battery) no of the device does not match with the IMEI i get when typing *#06#
The IMEI i get when dial *#06# = 004999010640000 / 01
The IMEI under the battery = 355994/05/8434**/* (* represents rest of the IMEI numbers)
I flashed using ODIN again the ROM at samsung-updates.com/details/24621/Galaxy_S_3_International/GT-I9300/SKZ/I9300XXUGNA8.html which i said to be stock ROM. but its Not the original ROM which was in the mobile before, please find the below screenshot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Still the result is same, I am getting the same response.
Please help me to make phone calls through this mobile,
Appreciate any suggestions and feedbacks. Thanks in advance.
appmonkeydev said:
I bought my phone from a friend and I am the second user. It was rooted and was in modified status (when i checked About->device->status) but working fine and had zero issues. So yesterday i wanted to install a new ROM to get android 4.3 as what i had was android 4.1.2.
I installed this Omega Rom after downloading from omegadroid.co/download-center/ for my S3 I9300, omega version is v58 - XXUGNB6
Now everything is working fine except the calling feature, phone is fast as well but when i try to make a call it says not registered on network.
Which was working Fine before, similarly to another S3 I9300 of a friend the same ROM is installed and it works fine without any problem at all. Even calling is working fine.
The error message is "Not Registered on Network"
What can i do to recover my phone? Can i unroot it ? if so please appreciate any help on how to do it. What could be the issue here if anyone have a idea.
UPDATE
I have found now that IMEI (under the battery) no of the device does not match with the IMEI i get when typing *#06#
The IMEI i get when dial *#06# = 004999010640000 / 01
The IMEI under the battery = 355994/05/8434**/* (* represents rest of the IMEI numbers)
I flashed using ODIN again the ROM at samsung-updates.com/details/24621/Galaxy_S_3_International/GT-I9300/SKZ/I9300XXUGNA8.html which i said to be stock ROM. but its Not the original ROM which was in the mobile before, please find the below screenshot.
Please help me to make phone calls through this mobile,
Appreciate any suggestions and feedbacks. Thanks in advance.
Click to expand...
Click to collapse
Don't panic this as happend to many people when they upgrade from 4.1 to 4.3 roms your efs as changed from efs v1 to efs v2 read this to solve your problem >> http://forum.xda-developers.com/galaxy-s3/general/ref-imei-efs-stuff-i9300-including-t2393289 <<
tallman43 said:
Don't panic this as happend to many people when they upgrade from 4.1 to 4.3 roms your efs as changed from efs v1 to efs v2 read this to solve your problem >> http://forum.xda-developers.com/galaxy-s3/general/ref-imei-efs-stuff-i9300-including-t2393289 <<
Click to expand...
Click to collapse
Thanks a lot for replying quickly.
Now I tried installing the ROM from samsung-updates.com/details/17288/Galaxy_S_3_International/GT-I9300/SLK/I9300XXEMH4.html
But seems like it has more problem because phone is restarting again and again, never passes the Samsung logo loading screen.
This is how i tried to install the ROM technobezz.com/flash-stock-rom-via-odin-samsung-galaxy-s3/
is it because the ROM is not suitable ? i am wondering why its not coming to start up screen. :-| can you suggest me a ROM please to install my phone information are as in the screenshots posted earlier.
Please help me out and i really appreciate.
Thanks again.
appmonkeydev said:
Thanks a lot for replying quickly.
Now I tried installing the ROM from samsung-updates.com/details/17288/Galaxy_S_3_International/GT-I9300/SLK/I9300XXEMH4.html
But seems like it has more problem because phone is restarting again and again, never passes the Samsung logo loading screen.
This is how i tried to install the ROM technobezz.com/flash-stock-rom-via-odin-samsung-galaxy-s3/
is it because the ROM is not suitable ? i am wondering why its not coming to start up screen. :-| can you suggest me a ROM please to install my phone information are as in the screenshots posted earlier.
Please help me out and i really appreciate.
Thanks again.
Click to expand...
Click to collapse
When you flash any rom boot into recovery after flashing and wipe cache and factory reset this stops the majority of bootloops.
tallman43 said:
When you flash any rom boot into recovery after flashing and wipe cache and factory reset this stops the majority of bootloops.
Click to expand...
Click to collapse
Thank you very much, it worked. rebooting issue is gone. but the IMEI no issue still persist, 004999010640000 / 01
i tried the options in below links
http://forum.xda-developers.com/galaxy-s3/general/ref-imei-efs-stuff-i9300-including-t2393289/
http://forum.xda-developers.com/galaxy-s2/general/guide-recover-imei-9-steps-t1264021
its not mentioned how to recover when orginal efs file backup is not taken, this is the problem i have orginal backup was not taken.
is there anyway to create the efs folder structure from the scratch or any software that will generate so? please let me know what i am missing as this is being a very common issue after researching a lot.
or should i consider giving this phone to repair to any Samsung branch?
Thanks in advance.
appmonkeydev said:
Thank you very much, it worked. rebooting issue is gone. but the IMEI no issue still persist, 004999010640000 / 01
i tried the options in below links
http://forum.xda-developers.com/galaxy-s3/general/ref-imei-efs-stuff-i9300-including-t2393289/
http://forum.xda-developers.com/galaxy-s2/general/guide-recover-imei-9-steps-t1264021
its not mentioned how to recover when orginal efs file backup is not taken, this is the problem i have orginal backup was not taken.
is there anyway to create the efs folder structure from the scratch or any software that will generate so? please let me know what i am missing as this is being a very common issue after researching a lot.
or should i consider giving this phone to repair to any Samsung branch?
Thanks in advance.
Click to expand...
Click to collapse
Try flashing a patched modem and kernel look at these post's >> http://forum.xda-developers.com/gal...ii-network-problem-update-sn-t1918601/page199 << look at post 1984
Also look at this >>http://forum.xda-developers.com/galaxy-s3/help/guide-emergency-calls-problem-siii-i9300-t2752541 <<
Also here are some patched modems and kernels to try >> https://drive.google.com/folderview...sharing&tid=0B6MIUd7HJudAbU5YaGkzOUowMG8#list <<
Note: I am not affiliated to the Dev team of this ROM, just a Note 7 user who would like to share the ROM with everyone here. Hence, NO dev support will be provided.
Some elements of the UI/ROM options are in Chinese, but I will not be providing translations unless there is demand. Thank you for your understanding
A Chinese dev team has recently released an Oreo port for the Note 7, and hence I am sharing it here for everyone to enjoy.
The original Dev thread (in Chinese): Here
Once again, I am not affiliated to the Dev team, so don't direct any questions/bugs as I will not know how to solve them.
Most of the info listed below is translated from the original thread.
Aurora ROM for Note 7 Exynos 8890
Supported devices:
Note 7 N930F/FD
Unsupported devices:
Note 7 N930S/L/K
[*]ROM will fail to boot on these devices, as the kernel does not support these models yet.
ROM Information
Full Oreo 8.0 port based on the Note FE stock ROM
Stock UI, but with additional customization options
Multi-language support. A few elements may be in Chinese, but 90% of the UI will be in the chosen language.
Custom Aurora kernel for better battery life and stability
Pre-rooted, able to choose from SuperSU or Magisk on install
De-bloated
Full S-Pen support
Added Dolby Atmos audio effect
Advanced power menu - fast reboot, recovery, download mode, safe mode
Wallpapers and lock screen ported from the S9
No time limit/paywall, unlike the Soul ROM that has been floating around this forum
Device model changed to Samsung S8+ (SM-G9550)
Will not change or update the baseband
Things that are working:
Everything
except... (see below)
Things that are not working:
Iris scanner
Mobile data usage tracking (can be circumvented with 3rd party apps)
That's it
Bugs:
None known thus far
Screenshots:
Here
Installation guide:
1. Boot into TWRP recovery with home+volume up+power on while the device is off.
2. Do a full backup (optional, but always helpful in case something goes wrong)
3. Perform a full wipe (system, data, cache)
4. Flash the installer zip (download link below).
5. Follow the pictures in the album: How to install
6. The first boot may take 10-15 mins. Be patient.
7. Once the setup wizard pops up, change the language to English (or any language of your choice)
8. Reboot your device after configuring
9. Your Note 7 is ready for use
Special note: Do not update any system apps as the device model has been modified, and updating system apps may cause errors.
Download link:
http://www.mediafire.com/file/6sgn1b50lqsy2bz/Aurora_N930X_N935X_OREO_RG4_V1.0_2.zip/file
FAQ section (translated from the original dev thread)
Q: Google play services keeps stopping
A: Go to app permissions in settings and enable location access for Google play services.
Q: Unable to sync Google contacts
A: Go to app permissions -> Contacts, and enable all 3 settings for Google play services.
Note: The ROM comes with Google Play store installed but disabled by default. Refer to bomcoi1402's comment to see how to enable it.
Can you help me to install Google services? (Google play, Gmail, Maps, Google account manager, ...)
Thank somuch!
Update: I was installed. In Aurora app.
Hey guys, if you like using your device, DO NOT INSTALL this rom, it has a lot of chinese apps, and if you try to flash another rom your device would constantly be restarting itself.
I couldn't figure how to install google ?
After checking Aurora App setting WHAT?
Can you help me ?
I installed a gapps but Play services Stopped. @bomcoi1402
@IcyDevil_ can you translate FAQ section?
Edit: Thx for answers I will try again
10 cmt for upload picture
@ReTekno: do not install gApps. You can factory reset, then see pictures and do it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@KAL26: I was installed this rom from last week and everything okey now ^^~
KAL26 said:
Hey guys, if you like using your device, DO NOT INSTALL this rom, it has a lot of chinese apps, and if you try to flash another rom your device would constantly be restarting itself.
Click to expand...
Click to collapse
Are you sure we installed the same ROM? As far as I can see, the only Chinese app installed is the ROM settings, no others. Not quite sure about the flashing another ROM part, but have you done a full wipe before flashing? Dirty flashing may cause issues sometimes so it's not recommended to dirty flash.
ReTekno said:
I couldn't figure how to install google ?
After checking Aurora App setting WHAT?
Can you help me ?
I installed a gapps but Play services Stopped. @bomcoi1402
@IcyDevil_ can you translate FAQ section?
Click to expand...
Click to collapse
@ReTekno, have translated the FAQ section. Do take a look to see if it solves your issue.
Guys, how can I remove chinese text on the control panel ?
IcyDevil_ said:
Are you sure we installed the same ROM? As far as I can see, the only Chinese app installed is the ROM settings, no others. Not quite sure about the flashing another ROM part, but have you done a full wipe before flashing? Dirty flashing may cause issues sometimes so it's not recommended to dirty flash.
Click to expand...
Click to collapse
Yes i installed the same ROM, i did a full wipe and i still have random restarts. Thanks to this ROM i can't use my phone anymore. I'll see if i'll manage to get it working eventually.
You can try it.
Only one problem, this is don't push notification of Facebook, Messenger, Zalo.
I still don't know how to fix it.
ugur142015 said:
Guys, how can I remove chinese text on the control panel ?
Click to expand...
Click to collapse
I still don't know
KAL26 said:
Yes i installed the same ROM, i did a full wipe and i still have random restarts. Thanks to this ROM i can't use my phone anymore. I'll see if i'll manage to get it working eventually.
Click to expand...
Click to collapse
Same issue, but not with this rom (Note8 Port Full Note7/FE). Any solution!
Push notifications
[/COLOR]
bomcoi1402 said:
You can try it.
Only one problem, this is don't push notification of Facebook, Messenger, Zalo.
I still don't know how to fix it.
Click to expand...
Click to collapse
You can easily fix it by uninstalling the brevent app
Brevent prevents apps from running in background that is why when your screen is off you wont get any push notifications
vicioso3 said:
Same issue, but not with this rom (Note8 Port Full Note7/FE). Any solution!
Click to expand...
Click to collapse
Sadly i don't think there is a solution, I tried everything, factory reset, full wipe, re-root, nothing works, still getting random restarts, and the worse is happening whenever i try to update or install any apps, either from play store or from galaxy apps. Thanks to this crap, i now have an unusable brick of a note7.
KAL26 said:
Sadly i don't think there is a solution, I tried everything, factory reset, full wipe, re-root, nothing works, still getting random restarts, and the worse is happening whenever i try to update or install any apps, either from play store or from galaxy apps. Thanks to this crap, i now have an unusable brick of a note7.
Click to expand...
Click to collapse
And who asked you to do this? It looks a lot like a personal problem to me. I am running the other Chinese Oreo ROM for a long time with no problems. Tried this one too and it was good, but I just didn't want to fix all the Chinese again. I might try the Aurora kernel when I have the time.
I really suggest you study all the information available on this forum before you share nothing but frustrated rants. BTW, I can't see a way how you can brick this phone permanently. In the worst of all cases there is always Odin.
ulev said:
And who asked you to do this? It looks a lot like a personal problem to me. I am running the other Chinese Oreo ROM for a long time with no problems. Tried this one too and it was good, but I just didn't want to fix all the Chinese again. I might try the Aurora kernel when I have the time.
I really suggest you study all the information available on this forum before you share nothing but frustrated rants. BTW, I can't see a way how you can brick this phone permanently. In the worst of all cases there is always Odin.
Click to expand...
Click to collapse
What made you think i have a personal problem or that this simply is a frustrated rant? I simply told my experience in trying this ROM, and apparently i'm not the only one having issues with it. Due to all the chinese apps, and various other issues, i simply didn't like this ROM, and when i tried to flash another ROM, i got the problems i mentioned. I've been installing ROM's on my various phones for many years now, i'm not a noob when it comes to rooting, ROM's and other custom things you can do to and android device. I tried ODIN aswell, and still no changes, so i simply voiced my opinion. Next time try to be less frustrated yourself, and less judgy.
KAL26 said:
What made you think i have a personal problem or that this simply is a frustrated rant? I simply told my experience in trying this ROM, and apparently i'm not the only one having issues with it. Due to all the chinese apps, and various other issues, i simply didn't like this ROM, and when i tried to flash another ROM, i got the problems i mentioned. I've been installing ROM's on my various phones for many years now, i'm not a noob when it comes to rooting, ROM's and other custom things you can do to and android device. I tried ODIN aswell, and still no changes, so i simply voiced my opinion. Next time try to be less frustrated yourself, and less judgy.
Click to expand...
Click to collapse
Well, there is a long line of posts by you in this thread that are indicating that you should not have started using a device that has been withdrawn by the manufacturer.
BTW, I did not mean to say YOU have a problem (how would I know?). I simply wanted to say your problems should not be generalized as indicative of what can be done with this device.
I still don't see any reason why you can't flash back an older Android 7 version with Odin and have a flawless, Chinese free experience of this nice device until it dies. Again, the problems you are describing are related to your device or environment, not to the Note7 per se.
In fact, I would like to understand, how you initially overcame Samsung's blocking of the phone and how you proceeded since then. This would provide an indication what might have gone wrong. Your ranting does not.
And only so you understand, I am writing this on my Note7 with the Soul Vip11 Oreo ROM where I added my own mods to eliminate 99% of the Chinese crap and the pay wall. Once I 8did a TWRP backup and installed this ROM without any problem and played around with it for a while until I restored my old one,again no problem. There was no incentive for me to polish up this ROM and install all my apps again, would have been a total waste of time.
This should explain to you, that those Chinese ROMs might be a PITA, but they are also not intended for us Westerners. So if you can't handle them, simply don't go there.
ulev said:
Well, there is a long line of posts by you in this thread that are indicating that you should not have started using a device that has been withdrawn by the manufacturer.
BTW, I did not mean to say YOU have a problem (how would I know?). I simply wanted to say your problems should not be generalized as indicative of what can be done with this device.
I still don't see any reason why you can't flash back an older Android 7 version with Odin and have a flawless, Chinese free experience of this nice device until it dies. Again, the problems you are describing are related to your device or environment, not to the Note7 per se.
In fact, I would like to understand, how you initially overcame Samsung's blocking of the phone and how you proceeded since then. This would provide an indication what might have gone wrong. Your ranting does not.
And only so you understand, I am writing this on my Note7 with the Soul Vip11 Oreo ROM where I added my own mods to eliminate 99% of the Chinese crap and the pay wall. Once I 8did a TWRP backup and installed this ROM without any problem and played around with it for a while until I restored my old one,again no problem. There was no incentive for me to polish up this ROM and install all my apps again, would have been a total waste of time.
This should explain to you, that those Chinese ROMs might be a PITA, but they are also not intended for us Westerners. So if you can't handle them, simply don't go there.
Click to expand...
Click to collapse
Maybe you didn't understood what i wrote in my first post. What i said was that i installed this ROM, tried to use it, and due a lot of chinese apps, i couldn't get used to it, so i flashed the ROM i was using before, and that's when the problems began. Random restarts, device would freeze up. I did backup, full wipe, factory restore, re-did the entire root process, I even tried ODIN, without any luck. Before installing this ROM, my device worked flawlessly, It was rooted before installing this, with the Nougat Note FE ROM, no issues. So for me this ROM messed up my device in some way.
KAL26 said:
Maybe you didn't understood what i wrote in my first post. What i said was that i installed this ROM, tried to use it, and due a lot of chinese apps, i couldn't get used to it, so i flashed the ROM i was using before, and that's when the problems began. Random restarts, device would freeze up. I did backup, full wipe, factory restore, re-did the entire root process, I even tried ODIN, without any luck. Before installing this ROM, my device worked flawlessly, It was rooted before installing this, with the Nougat Note FE ROM, no issues. So for me this ROM messed up my device in some way.
Click to expand...
Click to collapse
All I can say: Do a TWRP backup first if you want to experiment. Has been said on XDA thousands of times. And READ the OP fully before you jump into it.
And if I had your problem, I am quite sure I would fix it silently myself. You may have to format (not wipe). Also, a remaining SAMSUNG function in the bootloader may try to keep you from going back to NOUGAT, so as a last option you might have to live with one of the Chinese OREO ROMs before you figure out what to do.
In any case, the real experts (besides the Chinese) have all moved on. Nobody around anymore who would help you. And I obviously don't like your style... :silly: