Headphone Sound 1-sided - AT&T HTC One (M8)

To who ever can help...I'm experiencing an ongoing problem with headphones on my m8. Trying to listen to music is either one sided (left bud) or none at all. If I plug into my stereo, the Jack works and music is played normal. Coming from headphones to stereo, it goes one sided (even playing through the stereo).
I've changed ROMs with full wipe & clean install, the problem still occurs. Various headphones all do the same. I'm almost positive it's a software glitch somewhere but can't find a setting for it. I've tried freezing music apps with TB, I've also installed HK to see if that would tweak something. No clue what else to do.

To clarify, are you saying that using a line cable to connect the phone to your stereo receiver/amp plays both sides. But all headphones, it only plays on one side?

Correct...I CAN play music via aux cord but CAN"T play through headphones of any kind (I've tried three different ones).

Bump

Different headphones use different rubber moldings around the wires, especially near the plug. Some can be thicker and some have little plastic protrusions which prevent the cable from being fully plugged in. If the cable isn't fully inserted, you will sometimes receive no audio in the right ear or no audio at all. I have this problem with a pair of Sony earbuds on my S4 and my M8, and as a result, they're dedicated strictly to my laptop.
Try this...get a male to female aux cord and plug one end to the phone, then plug your headphones into that.
Also, you can try pulling back the plastic sheath around the plug and see if that helps.

slapdaddy said:
Try this...get a male to female aux cord and plug one end to the phone, then plug your headphones into that.
Also, you can try pulling back the plastic sheath around the plug and see if that helps.
Click to expand...
Click to collapse
I'll definitely try this out and see what happens. Its just weird because when I first got the phone the headphones worked (any and all). It wasn't untill I rooted that I started noticing an issue.

Or just cut a bit of the rubber off the edge of the headphones. With the case on my phone I had to do that for the aux jack in my car so that it would go all the way in. Of course only if they are your headphones and don't mind to do that.
Sent from my HTC One_M8 using XDA Premium 4 mobile app

How about the headset that came with the phone? This shouldn't need any jiggering to make it plug in properly.
I would also agree with the notion that if you have a case on the phone, it may interfere with the headphone plugging in. Definitely try taking the case off (if you have one on) to see if it makes any difference.
Have you tried any headphones that don't have the microphone ("normal" headsets that aren't specially intended to use with smartphones)? Its just odd that a AUX cable works, and headphones don't. The only thing I can think that can be different is the hardware and software differences that are associated with the microphone (buttons, etc.).

Are there specific lines of code I can look at in the build .prop? I've gotten half the battle covered by Uninstalling HK and fixing permissions /wiping dalvik. Again music plays perfectly through stereo, whether aux, wifi or bt. One sided when headphones are used. There has to be some funky code going on.

I know this is old but did you ever find out?

Related

Headphone port causing phone to go crazy

I was on my nightly bicycle ride using Cardio Trainer and my Skull Candy Smokin Buds, and everytime id move the phone in my bicycle jersey near the headphone jack it would cause the music to skip/stop/ff sometimes try to voice search and sometimes try to redial out ... I can replicate the problem here at home by jiggling the headphone jack around abit .......... anyone else
Yes. I posted the exact same thing in Q&A forum. Got no response but I figured it out.
Sometimes when you plug in your headphones they are detected as a headset. It doesn't occur that often, just make sure the notification icon doesn't have the microphone part. Otherwise any shaking causes songs to skip, phone to freak out and voice dialer starts.
Apparently there's also an app that makes sure they always do connect in headset mode. I think I'll go replace my phone anyway.
Sent from my PG86100 using XDA App
I had the same thing happen yesterday. I was testing some speakers at a job site and the phone was going CRAZY. I pulled the phone out of the otterbox case and re-plugged the headphone in and it was fine. I think my problem was the case + cable was not making the correct contact. Today I had the headphones from a PSP plugged in (with case) and it was fine.
Looks like its the same thing that was heading to my evo4g. The headphone input is design for 3 ring conductor (for remote control) but your headphone jack has 2 ring conductor thus making your phone act weird. I brought an adopter (you can go search amazon) and it fixed the problem.
go to marketplace and download "headset blocker". it wont show up in your apps list. go to 1 of your homescreens, and add its widget. its a toggle that you turn on and off. when its on, none of the headphone control features will work, and it it should just play your music without skipping tracks and what not.
I have the same issue did you ever figure it out?
Like previously mentioned this is because it is designed for a 3 ring conductor. 1 is left, 2 is right, 3 is microphone/control. The controls are back track, forward track, pause/play/answer/hangup. If you have a pair of headphones with 2 conductor (which is fine and it is also designed for) you are good. If, however, you aren't making full contact (because of cases being in the way or you have a 'non standard' headphones, read: cheap ****) wacky things can happy from intermittent contact of the various points.
I've never experienced this on either phone, but, it is a thing and it makes perfect sense.
There is another possibility...that the jack is fncked up. Poorly soldered, defective jack, abused (all it takes it one good jerk on the cable to ruin everything).
It's not as random and wacky of a situation as it sounds like.
I have two different 2 ring (stereo) headphone cables from two different manufacturers and the cable has nothing to do with the issue in my case. The issue is not with headphone/earbuds and not with the cable not plugging in all the way. The issue for me is that when you have the headphone cable plugged into the jack and the other end is feeding any type of amp: stereo equipment, Aux input in a car, whatever, the phone absolutely loses its mind. I've tested it on three different phones now and it does it every time. The phone is unusable until you download, install, and activate Headset Blocker from the market. Then everything works perfectly. It appears to be a defect in either the hardware or the software because it is picking up electrical noise as headset control signals.
BTW, I've measured the cables and tested to be sure they plug in all the way. They are standard 2 ring (which means three conductor) cables that should not be triggering any headset functionality. Something on these phones is falsely triggering the headset connection: maybe some very small electrical signal or voltage coming from aux inputs because as I said, earbuds/headphones with the exact same connector don't have the problem.
Mike
I had the same problem and just swapped it for a new phone. If you're still under 30 days just take it back.
mikeyxda said:
I have two different 2 ring (stereo) headphone cables from two different manufacturers and the cable has nothing to do with the issue in my case. The issue is not with headphone/earbuds and not with the cable not plugging in all the way. The issue for me is that when you have the headphone cable plugged into the jack and the other end is feeding any type of amp: stereo equipment, Aux input in a car, whatever, the phone absolutely loses its mind. I've tested it on three different phones now and it does it every time. The phone is unusable until you download, install, and activate Headset Blocker from the market. Then everything works perfectly. It appears to be a defect in either the hardware or the software because it is picking up electrical noise as headset control signals.
BTW, I've measured the cables and tested to be sure they plug in all the way. They are standard 2 ring (which means three conductor) cables that should not be triggering any headset functionality. Something on these phones is falsely triggering the headset connection: maybe some very small electrical signal or voltage coming from aux inputs because as I said, earbuds/headphones with the exact same connector don't have the problem.
Mike
Click to expand...
Click to collapse
It sounds likely that it could be a grounding issue, probably on the amp side...though it could be on the phone side, especially if this happens to some phones and not others. If this is pro gear there is probably a ground lift switch on the back...give that a shot, if it doesn't help then it is definitely the phone...which I am leaning towards since it seems to happen on some and not others.
Headset Blocker from Market. I had a video on youtube about this and my thread is here.
i am having the same problem. thanks for the heads up for the headset blocker app. beats using up warranty or paying deductible for now.
I know this thread is 2 years old, but I figured bumping is better than starting a new thread. Anways, this issue has been driving me crazy to no end. Headset blocker stops the false signals. However, if it's in your pocket and the base of the jack is bent, (at least on Skullcandy products + HTC Inspire), music stops playing from the left ear.
Anyways, I figured out a solution to this. Cut a 3.4mm hole in a credit card, and then insert your headphone jack. Trim the card around where you insert the headphone jack. To get the right size hole, I use a knife to penetrate the card, and then use a screwdriver to widen the hole until it's about right. It should stop all interference and false signals, audio cutting when your phone is in your pocket and the headphone base is bent.
This also works on heaphones that have microphones; however, you have to remove the plastic piece if you want to use the mic.
Abaout those adapters on Amazon that someone mentioned; what do I search to find them?
daneurysm said:
It sounds likely that it could be a grounding issue, probably on the amp side...though it could be on the phone side, especially if this happens to some phones and not others. If this is pro gear there is probably a ground lift switch on the back...give that a shot, if it doesn't help then it is definitely the phone...which I am leaning towards since it seems to happen on some and not others.
Click to expand...
Click to collapse
Nope, it's certainly on the phone side.
I've had the same issues plugging it into my car and into professional audio equipment.
Headset blocker is great. I just keep it on all the time.
It was pretty funny sitting in the car and realizing that it's dialing everyone on your contact list though. Couldn't make it stop even after unplugging it. It went crazy.
DjDom said:
Nope, it's certainly on the phone side.
I've had the same issues plugging it into my car and into professional audio equipment.
Headset blocker is great. I just keep it on all the time.
It was pretty funny sitting in the car and realizing that it's dialing everyone on your contact list though. Couldn't make it stop even after unplugging it. It went crazy.
Click to expand...
Click to collapse
i have the exact same thing on my device, but it happens with any headphones i have plugged in
moving them just a bit causes google now to launch repeatedly and the music to skip,play,pause,etc
to fix it i remember using a blocker from the market and editing the code that launches google now via headphones so the blocker would block it aswell

Odd whistling noise when connected to aux input in car

I've got an aux input in my car, and today when I tried plugging in my GSIII, I got met with a faint but annoying whistling sound underneath my music.
It stops if there's no sound being sent over the wire, but the moment a notification (or music) starts playing, it comes up.
Car worked fine with my DX, and still works fine with my friends' iPhones, but I get the stupid sound with my brand new galaxy siii. Oddly enough, it works fine with headphones.
any ideas guys? I'm kinda stumped.
Search ground loop isolation. You are getting dirty power to your phone.
Sent from my SPH-L710 using xda premium
none
Do you have the phone charging through the cigarette lighter? You can get ground noise from there, and it will be transmitted through the phone to your stereo.
Hm. Let me try again without it charging, but that's strange. Why did my old DX not experience this?
Assuming that's the issue - will a different cable solve the problem?
edit: So I checked the phone without plugging it into the charger. Still get a whistling noise. It's really more like a high pitched hum. I notice that if I don't plug the plug in all the way it doesn't happen (but I think I only get one channel).
I'm getting the same thing, and it's driving me crazy. At first I thought my brakes were going bad in my car!
I've tried different audio players and apps, but it still always get the noise. The phone is not charging, and I did not get this with my old captivate either.
Any ideas?
Doesnt happen in my Porsche. I'm using Bluetooth audio though.
Sent from my SGH-T999 using Tapatalk 2
Thats strange. I will get that when charging, but only while nothing is playing.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
I am having the same issue. First time experiencing it though; never heard it with the iPhone, HOX, or NS
I'm using a line in cable, and when i jiggle it, i can hear the noise change tone at the same time. I have a feeling it might be because it's a regular stereo cable and the microphone combo jack on the phone is not working right with it. But that's just a guess.
It's pretty annoying and its making the phone unusable as a music player.
Happens in my Lamborghini (Dodge Caravan) when using a MP3 player. Usually, if I run my hand down the cable it clears as though it's some kind of static build up in the cable.
Sent from my Transformer TF101 using xda premium
try flipping the cable (putting the aux in side into the phone and the phone side in the aux in) it happens to me sometimes and if I flip the cable it clears it out I couldn't tell you why though. also make sure there isn't any dust in the ports or on the cable ends.
That noise you hear is most likely due to the electrical system in the car. I rent cars all the time for work and never know the shape the electrical sys is in so to resolve the issue I bought a Kensington Cable from amazon and now have CD quality sound from any music app including pandora & spotify.
Hope this helps.:cyclops:
rmelendez3 said:
try flipping the cable (putting the aux in side into the phone and the phone side in the aux in) it happens to me sometimes and if I flip the cable it clears it out I couldn't tell you why though. also make sure there isn't any dust in the ports or on the cable ends.
Click to expand...
Click to collapse
Unfortunately, my cable is RCA on one side (L+R channels split) and regular 3.5mm on other.
nyciz said:
That noise you hear is most likely due to the electrical system in the car. I rent cars all the time for work and never know the shape the electrical sys is in so to resolve the issue I bought a Kensington Cable from amazon and now have CD quality sound from any music app including pandora & spotify.
Hope this helps.:cyclops:
Click to expand...
Click to collapse
Not sure what you mean by "the electrical system" and the "shape" of it. Could you clarify? As I said, I have no problems with other devices in this car.
I would usually suspect something wrong with the car, or maybe a ground loop, but I can plug in my Galaxy S (Captivate) or iPod with the same cable, same everything, just switching out the phone, and the noise goes away.
The way the noise cuts in and out between songs, and when I close the music app, it seems to only happen when the audio chip is getting a signal or is being energized. This is making me think that it may just be a noisy chip :crying:
I was on conf call with SGS3 plugged to AUX, no power charging was going on. And either noise canceling didn't work, or noise was getting in thru AUX line to receiving end. I didn't have problems listening, but ppl on the other end complained, and I had to mute the mic.
:crying:
cashyftw said:
doesnt happen in my porsche. I'm using bluetooth audio though.
Sent from my sgh-t999 using tapatalk 2
Click to expand...
Click to collapse
sorry! Could you speak up please? I couldn"t hear you over the sound of your e-penis
I am having the same problem. My HTC Thunderbolt never had this problem. Same car and cables, I get the hissing and popping until I play something. Then it goes away until I stop the music and then it comes back again. Weird and disappointing.
The problem comes from the 4-pin (TRRS) audio jack in the GSIII combined with presumably bad grounding in my 2007 Honda Accord, or the Aux adapter.
I fixed it with a simple DIY solution. I cannibalized a TRRS headphone jack and bought a TRS (3-pin) port from radioshack. I clipped off the jack with a generous portion of wire, then stripped them and cleaned them from their insulation (they are covered in insulating dye).
I connected 3 of the wires to the TRS connector, and taped the whole thing up. No more hum.
Also known as Road Noise. Where the power cable and audio input are too close to each other. Electrical current emits a small magnetic field which will hinder audio quality and promote road noise from the alternator.
This is a very typical senario in car audio install, when you run the power cable and rca right next to each other.
this buzzing noise happens to me every time i drive my car for the past 3 years:
solution: turn down the car volume. if you keep your car volume half-way, then you wont hear it as much, or you wont hear it at all.... you can make the phone volume as loud as you want though. also, as you accelerate faster, the noise gets louder. watch, try it.

Aux Cable / Headphone Bug

So figured I'd go ahead and add a thread about this here for us Sprint users that are experiencing the problem with the Aux cable. Its a known issue and I'd link to a couple other posts, but I'm still a "noob"
I was a little upset to find that I wasn't able to use my phone to Pandora in the car.
However....
Today I got it to work, and here is how: I had the stereo set to the CD player when i plugged the AUX cable in and the icon stayed in the notification bar. Then I launched Pandora and let it start playing. THEN I switched the stereo to AUX mode, and it played fine my entire trip to work. Still experienced the "hot plug" sound between tracks, but I think I can deal with it.
geetee360 said:
So figured I'd go ahead and add a thread about this here for us Sprint users that are experiencing the problem with the Aux cable. Its a known issue and I'd link to a couple other posts, but I'm still a "noob"
I was a little upset to find that I wasn't able to use my phone to Pandora in the car.
However....
Today I got it to work, and here is how: I had the stereo set to the CD player when i plugged the AUX cable in and the icon stayed in the notification bar. Then I launched Pandora and let it start playing. THEN I switched the stereo to AUX mode, and it played fine my entire trip to work. Still experienced the "hot plug" sound between tracks, but I think I can deal with it.
Click to expand...
Click to collapse
I recall having an issue with my samsung headphones. They didn't work at one point, I rebooted and they were fine. The phone didn't even detect them for some reason. I've had no issues with aux in my car (aside from needing a new cable), however I thought it would be worth mentioning that my Note 2 had an issue with aux when it is on any AOSP ROMs. Selecting any app, even swiping the notification window down, sometimes even just leaving the music app and going back will stop the music from playing. The only solution for this was to go to the home screen unplug the aux start music playing and plug the cable back in and touch no other app. Again, it never did this with stock. I even went back to stock briefly because of this. AOSP seems to throw a fit with the aux cables.
I had issues with AUX today as well. Thought it was my specific phone but I'm relieved to know it's common....and perhaps a software issue.
infernosoft said:
I had issues with AUX today as well. Thought it was my specific phone but I'm relieved to know it's common....and perhaps a software issue.
Click to expand...
Click to collapse
Yeah I have it as well...I've found if I start Spotify, then plug in the AUX cord from my car, it works fine.
So I think I know the answer to this one.
It seems to have to do with how cars and some other devices treat aux inputs. For the most part it appears (at least in the case of my Prius) that with the input switched to aux the phone would not consistantly stay aux mode. What it seems like was happening is that the car doesnt actually 'activate' the aux port unless it senses a completed circuit (ie: audio playing). I have to believe this has to do with preventing feedback.
Unfortunately it seems the phone does the exact same thing. The headphone or aux symbol appears on insert of the cable because the phone senses the initial connection but then finds no load on the circuit thus assuming it is not connected and disables the port. You end up with basically an electronic stalemate. Neither one engaging cause they sense nothing from the other side. No load on the circuit.
Bear in mind this is completely dependent on the device you are connecting to your phone, as to whether it does what I'm talking about. Likewise, those experiencing popping or similar during song or track changes would basically be experiencing the same issue as during the song change the phone stops playing audio and your car kills the port. When the car kills the port, the phone kills the port, or is in the process of it when the next song starts.
To counteract this I bought an audio cable with a ground loop circuit built in. It is designed to remove the buzz from car aux audio due to the phone or other device being charged through the car's power system. But the added benefit is that it creates an artificial load on the line that the phone senses. Same idea as plugging in headphones as the earphone on the headphones creates a load on the line in the same way.
This is the audio cable I bought. Works like a charm every time, although one warning. I did experience one case of very loud static when unplugging it through the speakers in my car because of the fact that the car and the phone believe the circuit constantly is active and thus do not kill the connection to save your hearing. So be careful to only plug or unplug it when the input is not active or the car is off.
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ/
It does appear that Amazon has put the item under review for now, though I'm not sure why as mine works flawlessly, but any similar car aux noise reducing cable would work, assuming its decent quality.
An aux cable with an in-line volume control should peform similarly due to the load created by the potentiometer, although it wouldnt remove the charger buzz.
Something like this:
http://www.amazon.com/Apollo23-3-3-Volume-Control-Samsung-Smartphones/dp/B00COXA8Y4
wolfhelm said:
So I think I know the answer to this one.
It seems to have to do with how cars and some other devices treat aux inputs. For the most part it appears (at least in the case of my Prius) that with the input switched to aux the phone would not consistantly stay aux mode. What it seems like was happening is that the car doesnt actually 'activate' the aux port unless it senses a completed circuit (ie: audio playing). I have to believe this has to do with preventing feedback.
Unfortunately it seems the phone does the exact same thing. The headphone or aux symbol appears on insert of the cable because the phone senses the initial connection but then finds no load on the circuit thus assuming it is not connected and disables the port. You end up with basically an electronic stalemate. Neither one engaging cause they sense nothing from the other side. No load on the circuit.
Bear in mind this is completely dependent on the device you are connecting to your phone, as to whether it does what I'm talking about. Likewise, those experiencing popping or similar during song or track changes would basically be experiencing the same issue as during the song change the phone stops playing audio and your car kills the port. When the car kills the port, the phone kills the port, or is in the process of it when the next song starts.
To counteract this I bought an audio cable with a ground loop circuit built in. It is designed to remove the buzz from car aux audio due to the phone or other device being charged through the car's power system. But the added benefit is that it creates an artificial load on the line that the phone senses. Same idea as plugging in headphones as the earphone on the headphones creates a load on the line in the same way.
This is the audio cable I bought. Works like a charm every time, although one warning. I did experience one case of very loud static when unplugging it through the speakers in my car because of the fact that the car and the phone believe the circuit constantly is active and thus do not kill the connection to save your hearing. So be careful to only plug or unplug it when the input is not active or the car is off.
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ/
It does appear that Amazon has put the item under review for now, though I'm not sure why as mine works flawlessly, but any similar car aux noise reducing cable would work, assuming its decent quality.
An aux cable with an in-line volume control should peform similarly due to the load created by the potentiometer, although it wouldnt remove the charger buzz.
Click to expand...
Click to collapse
I just want my G3 to work as it should for such a simple function as the headphone jack/aux port.
I want to listen to music in my car without fannying around with different cables etc etc.
I had a Galaxy Note and S4, both played fine in the same car with the same cabling.
Shame on LG for releasing us a substandard product that cannot perform the most basic of tasks correctly.
I will say, i was extremely dissapointed when i plugged my shinny new phone into my stereo and the audio continued to come through the phone speakers. All other phones/devices work just fine in my car and there is no reason why my G3 shouldn't either.
R2DeeTard said:
I will say, i was extremely dissapointed when i plugged my shinny new phone into my stereo and the audio continued to come through the phone speakers. All other phones/devices work just fine in my car and there is no reason why my G3 shouldn't either.
Click to expand...
Click to collapse
My first feeling was confusion. I was also worried my headphones wouldn't work. But I was able to watch a beautiful high def video on my phone last night with my headphones on
Sent from my LGLS990
I just got this phone too, and although I love it, I was very sad to have this issue! I haven't had it on any other phone I have owned, so I certainly hope it is fixed in a future update. That and the video force close bug, but that is for another thread!
Guys, there is nothing wrong with the AUX port on your cars -- and they don't trigger via sound. They trigger via either conductive circuitry or via ohm load. Can you test if you are still seeing these problems when *not* charging? This issue is typically related to bad grounds. This happens to me at work when my phone is charging and I plug my headphones directly into my G3. If I pass the audio to my PC first (to the line-in,) and THEN to my headphones, the static is mostly gone.
So try unplugging the power source, and using different aux cables. Another factor is try plugging the power source into the same feed as the stereo. Sometimes this isn't that easy though.
What's happening on the back end with the sound changing between songs, etc, is that the audio codec, (the chipset,) is turning off to conserve battery. For me, when the chip turns on, it grounds the 3.5mm port just fine, and when it's off, AND I have power connected with headphones, I can get that whine -- depending on the scenario. So basically, this is by design -- an energy conservation tactic. I would be okay with them leaving the audio chip on the entire time headphones are connected.
Had this problem too and found that as long as I was charging the phone it would play like it should.
Yep, grounding issue. At work, routing the aux signal through my PC works just fine WHILE charging -- if I unplug, then I get all the machine noise.
In general, though, the headphone output is pretty crappy on this device. Even when it's "working great," there is still a faint amount of white noise that can be heard. Much higher than my HTC M7. The S5 had similar performance as the G3 though.
I just bought:
http://www.amazon.com/gp/product/B00ANDHBNS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
And plugged it into:
http://www.amazon.com/gp/product/B00F474DVG/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
So when I get in my car, it connects to the dongle for music and the car's blue tooth for phone.
It's not perfect, but gets the job done.
wolfhelm said:
So I think I know the answer to this one.
It seems to have to do with how cars and some other devices treat aux inputs. For the most part it appears (at least in the case of my Prius) that with the input switched to aux the phone would not consistantly stay aux mode. What it seems like was happening is that the car doesnt actually 'activate' the aux port unless it senses a completed circuit (ie: audio playing). I have to believe this has to do with preventing feedback.
Unfortunately it seems the phone does the exact same thing. The headphone or aux symbol appears on insert of the cable because the phone senses the initial connection but then finds no load on the circuit thus assuming it is not connected and disables the port. You end up with basically an electronic stalemate. Neither one engaging cause they sense nothing from the other side. No load on the circuit.
Bear in mind this is completely dependent on the device you are connecting to your phone, as to whether it does what I'm talking about. Likewise, those experiencing popping or similar during song or track changes would basically be experiencing the same issue as during the song change the phone stops playing audio and your car kills the port. When the car kills the port, the phone kills the port, or is in the process of it when the next song starts.
To counteract this I bought an audio cable with a ground loop circuit built in. It is designed to remove the buzz from car aux audio due to the phone or other device being charged through the car's power system. But the added benefit is that it creates an artificial load on the line that the phone senses. Same idea as plugging in headphones as the earphone on the headphones creates a load on the line in the same way.
This is the audio cable I bought. Works like a charm every time, although one warning. I did experience one case of very loud static when unplugging it through the speakers in my car because of the fact that the car and the phone believe the circuit constantly is active and thus do not kill the connection to save your hearing. So be careful to only plug or unplug it when the input is not active or the car is off.
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ/
It does appear that Amazon has put the item under review for now, though I'm not sure why as mine works flawlessly, but any similar car aux noise reducing cable would work, assuming its decent quality.
An aux cable with an in-line volume control should peform similarly due to the load created by the potentiometer, although it wouldnt remove the charger buzz.
Something like this:
http://www.amazon.com/Apollo23-3-3-Volume-Control-Samsung-Smartphones/dp/B00COXA8Y4
Click to expand...
Click to collapse
I just purchased this:
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ/ref=sr_1_1?ie=UTF8&qid=1406313911&sr=8-1&keywords=kensington+noise+reducing+car+audio+aux+cable
Working pretty well. Mainly solves the connectivity issues.
Still have the pop between tracks but it's much better.
Still have the "computer talk" garbage noise related to the display coming through the left channel.
I can live with this until LG or Android comes up with a fix.
aux problem
I guess I lucked out with my phone but then again maybe not. First off I will describe my setup, I have a 05 Subaru WRX with stock 6cd changer head unit ( no aux port ) I installed a Harmon Kardon Drive + Play iPod dock. This allows me to remote control my iPod and comes with a display that shows tracks and such. It works by FM transmitter but has an optional wire which I have that connects directly between the antenna and the stereo so you get little to no loss of signal. Between the AUX and my phone I connected a PAC SNI-1/3.5 3.5-mm Ground Loop Noise device. My previous phone was an LG Optimus G which I loved, when I hooked this phone up I could listen to Pandora/TuneinRadio through my car speakers and upon making/receiving a call I would hear the call through the car speakers and when I talked the phone mic. would pick up my voice. When I attempt this with the G3 I get no popping between tracks but the phone mutes the mic and when I say mute I don't mean the mute button comes on I mean the other person can't hear me. I found if I unplug and plug the phone in during the call eventually the mic works again, but to do this while driving defeats the purpose of hands free calling. Does anyone else have this problem? (or a solution).
Click to open expanded view
gorillaz1 said:
Yeah I have it as well...I've found if I start Spotify, then plug in the AUX cord from my car, it works fine.
Click to expand...
Click to collapse
Works for me, thank you.
Mines does not work at all, with headphones or aux Jack, now I have to get Bluetooth headphones and bluetooth radio for car
Sent from my LGLS990 using XDA Free mobile app
Do we know if LG is working on this issue? Or if it is something that can even be fixed with an update? I'm getting tired of messing with the cable just to play music in my car, and I don't want to have to buy extra accessories to get the job done.
Sent from my LGLS990 using XDA Free mobile app
Bumping this thread because I just started having issues. Last night I was listen to music with headphones and my device kept turning itself down. I thought it was Tasker at first but it kept happening. Today at work I wanted to listen to music on headphones again and the sound would only come through my device. I'm going to try an aux and other headphones when I get off work, but does anyone know if a system restore will fix this? I'm rooted with TWRP, I just don't want to wipe it for nothing.
Srambo217 said:
Bumping this thread because I just started having issues. Last night I was listen to music with headphones and my device kept turning itself down. I thought it was Tasker at first but it kept happening. Today at work I wanted to listen to music on headphones again and the sound would only come through my device. I'm going to try an aux and other headphones when I get off work, but does anyone know if a system restore will fix this? I'm rooted with TWRP, I just don't want to wipe it for nothing.
Click to expand...
Click to collapse
They fixed it with ZV6. If you're already on ZV6 then I have no idea.
Sent from my LGLS990 using XDA Free mobile app

[Q] Headphones not working anymore

I got my z2 last Tuesday and my headphones (Logitech UE 350) were working perfectly until I tried using them today. For some reason they aren't being recognized anymore and the music just keeps playing through the phones speakers.
I tried plugging them into my old iphone and they work fine. I also tried plugging in another pair (Shure SE215) into both phones and they work fine. Except on the z2 it makes a clicking sound whenever I change songs now.
Does anybody know any way to fix this? Or could it be a faulty headphone jack?
Could be a number of things mate. Firstly, check and see the headphones are not physically damaged and even make sure that the microhpones in the in-ear pieces aren't affected by water exposure. Next check the headphones out by moving the wire around while they're plugged in and see how the sound comes out and if the phone reacts to any movements. When I used my phone in water even after hours of drying the headphone jack still wasn't dry so even the slightest movement switched tracks etc. Alternatively, it could be a headphone jack fault in the sense that it may be shorting? Or the 3.5mm 5pin connector on the headphones itself is damaged. It could also simply be a software glitch. Go into "Sounds" in your settings and change what kind of accessory it detects the headphones as. Try "Other", it may solve your problems. Alternatively take it into a Sony store or a phone shop and see if there's anywhere with a similar headset which you could test out.

Just got it - heaphone aux problem...again

I use an aux cable in my car to listen to music and podcasts.
when starting spotify i experienced incredible amounts of static, no matter what volume both the phone and car volume were set at.
Anybody else experience this?
Experiencing this in my work truck, will check my car after work
Sent from my LG-H830 using Tapatalk
Works fine in my car. Must be something else
Sent from my LG-H830 using Tapatalk
napafats said:
Works fine in my car. Must be something else
Sent from my LG-H830 using Tapatalk
Click to expand...
Click to collapse
Might be the worst static and fuzz ive ever experienced through a phone. Dont know what to do.
Any updates on this?
Mine comes out with an incredibly small amount of movement. Anyone else have this issue?
Nvm I just was being too easy on it. Requires a lot of pressure relative to anything else I've had for it to lock in.
Also you guys should dip a q-tip in rubbing alcohol and clean out your cars and phones headphone jacks. Especially in a work truck I imagine there's significant dust build up in there.
....cable
I found this too, even the headphones supplied need a fair amount of force to connect - at least they won't be pulled out so easy!
1 Maybe RF from cell communication leaking into audio or power cable.
2 Try with phone Not plugged into car power (I assume you run this with charger cable connected).
3 Try with better quality aux cable, maybe one that is shielded.
No fix. so aggravating.
Mine are flawless.
I just got the g5. Same issue. Tried multiple cables. Headphones work fine but not the aux cable
Just got my G5 a few days ago and I noticed this too.
In the car using a downloaded playlist on spotify and got terrible static noises (haven't tried any local music files as I don't use any!)
Sent from my LG-H850 using Tapatalk
I tried it in another head unit and it works.
Aux cable works in my Alpine but not in the Kenwood.
Ok guys and gals. I've been dealing with this for a bit and I found a fix of sorts. First off, two G5s (a buddies and mine) both had static in my car, but no static in his car or my mother's car. The difference being is that I have an aftermarket JVC player (removable face plate, auxiliary jack in front). The other two cars had factory stereos. I was guessing it was an aftermarket thing. Weird, I know, but that was the only commonality. Even more odd was that out of four phones the G5 was the only one having the hissy fit.
On Reddit some people were fixing this problem with a "ground loop isolator". It's basically this little noise filter device that plugs in the audio jack. Maybe $15 on Amazon. Anyways, I was about to order one, but before that I decided to take the head unit out of my car to see if any wires were loose. No wires were loose, but what I did find was an alternative 3.5mm jack in the back of my stereo. I'm sure not all stereos have a second port, but there's a decent chance. My particular head unit isn't what you'd call fancy by any means and it has one. So I plugged it in the back 3.5mm port and wouldn't you know, crystal clear sound!! I was so happy when it worked! Now instead of putting my stereo to "auxiliary" for the front port. I have to put it on "bt audio" to access the rear one. (whatever bt audio means, who knows, but it works).
So that's basically it, find out if your car stereo has a secondary 3.5mm port in the back and give it a shot. I didn't realize it at first, but right next to the front auxiliary port it actually says dual auxiliary/audio port. It could be an easy way to find out. As for rerouting the cord. I have a little pocket directly under my radio. There was a tiny hole in the back of the pocket/tray that I put the wire through. It looks cleaner than having it stick out from the faceplate of the radio any way.
If your stereo doesn't have a second 3.5mm port in the back You may want to check out a "ground loop isolator" from Amazon.
Good luck folks. Peace.
Not sure if could post links to the isolator. I'll give it a try.
Kresk - Here is the part that will boggle your mind with this issue. Go and play the stock LG sound file on the phone (The "High Quality" audio track). Once that plays, the static stops. Then switch to your regular music app - I use Spotify - and the music plays static free until the built in music app closes in the background. Then all the static comes back. If there was some way to force the phone to stay in whatever mode it uses for the High Quality audio track, it could be a great fix.
I've also found that there are three different "modes" of static I get on my phone too
1) Static Free
2) Low level of background static, volume independent (volume stays the same low background noise)
3) High level of static, volume dependent (Higher the volume, more static)
Typically when I do the thing where I get it into High Quality audio mode or whatever its using, I get 2 when immediately switching to Spotify. If I lock and unlock my screen, it goes to 3.
I'm going to go and try to plug into the "BT Audio" port on the back of my JVC head unit and see if it works. Will report back on it. I also have a ground loop isolator coming in the mail tomorrow, so I can give an update on that as well.
~PubstarHero
You might need a Ground Loop Noise Isolator, such as this: https://www.amazon.com/Mpow-Ground-Isolator-System-Stereo/dp/B019393MV2
I am thinking of getting one for an issue similar, but not the same as yours.
Same issues, in general. Static on most aux cables, and in my case some headphones don't work at all. My higher-end earbuds work flawlessly though, so go figure. Not sure what to do about it other than the ground fault isolator, though I was about to start looking into a Bluetooth-to-aux module.

Categories

Resources