Hi all. This thread is for all of you that have problems with the GSM signal. Here are some modems i found ! Hope this will help you!
Update:13.01.2016
Modem_P780_KK_V.103
Update: 24.08.2015
fullmodem_Moly_WR8_W1248_V47_P9
fullmodem_Moly_WR8_W1248_V44_P12
Check the one made by Xakep! One of the best developers for this phone!
Here is the link to my Google Drive: https://drive.google.com/folderview?id=0B2ORIgaV4iacOVpDTDcxYW4taDQ&usp=sharing
Here is a little tutorial:
1. Download your zip file;
2. Copy zip file on the root of your SD Card;
3. Reboot your phone on custom recovey TWRP or CWM
4. Go to install and browse for SD Card. There you will find your modem software in zip file.
5. Install the modem
6. Reboot your phone and wait for the GSM signal to appear;
7. If your signal is no good repeat steps 1 to 6 with another one.
Allways make backup !
Update:
Xakep modem software and fullmodem_Moly_WR8_W1248_V47_P9 work in Malta.
stympy said:
Hi all. Here are some modems i found ! Hope you need this!
Here is the link:
https://drive.google.com/folderview?id=0B2ORIgaV4iacOVpDTDcxYW4taDQ&usp=sharing
Allways make backup !
Click to expand...
Click to collapse
Currently working through the list, so far V52 Modem_P780_V52 is quite good. No 900Mhz shown but reliable 3G
stympy said:
Hi all. Here are some modems i found ! Hope you need this!
Here is the link:
https://drive.google.com/folderview?id=0B2ORIgaV4iacOVpDTDcxYW4taDQ&usp=sharing
Allways make backup !
Click to expand...
Click to collapse
Nice!
stympy said:
Hi all. Here are some modems i found ! Hope you need this!
Update the modem_P780_V23_S226_ROW and modem_P780_V23_S226_CN modems!
Updated new modems! Check the one made by Xakep! One of the best developers for this phone!
Here is the link:
https://drive.google.com/folderview?id=0B2ORIgaV4iacOVpDTDcxYW4taDQ&usp=sharing
Allways make backup !
Click to expand...
Click to collapse
Hi all moderators:
@SREEPRAJAY
@VECTUS
@Whiskey103
I want to make this thread sticky. Can you help me please with an advice?
Thank you.
stympy said:
Hi all moderators:
@SREEPRAJAY
@VECTUS
@Whiskey103
I want to make this thread sticky. Can you help me please with an advice?
Thank you.
Click to expand...
Click to collapse
Dear sir, please maintain this thread now that it is stickied. In addition I moved the thread to its more proper location now in general.
VECTUS said:
Dear sir, please maintain this thread now that it is stickied. In addition I moved the thread to its more proper location now in general.
Click to expand...
Click to collapse
Thank youuuuu
Hi, Will these work on MIUI 6 ROM without bricking it??
nishadh said:
Hi, Will these work on MIUI 6 ROM without bricking it??
Click to expand...
Click to collapse
Do a full backup with TWRP and try. I thinh will work. Never tried. Never forget FULL BACKUP.
Sent from my Lenovo P780
Hi,
My phone is made after 03.2014
Can you tell me which modem I can use to try to get better signal.
On my phone I have 4.4.2 version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Lenovo P780_ROW using Tapatalk
almir1984 said:
Hi,
My phone is made after 03.2014
Can you tell me which modem I can use to try to get better signal.
On my phone I have 4.4.2 version.
Sent from my Lenovo P780_ROW using Tapatalk
Click to expand...
Click to collapse
Hi. I have the one made by Xakep ! Try and see !
The think is that every country has diferent signal!
Do you have IMEI ? from that picture seems that you dont have any card or you lost IMEIS !
When I make picture in phone I dont have sim.
Can I use all modem for KK to try or dont.
Can I brick my phone if I use wrong modem
Sent from my Lenovo P780_ROW using Tapatalk
almir1984 said:
When I make picture in phone I dont have sim.
Can I use all modem for KK to try or dont.
Can I brick my phone if I use wrong modem
Sent from my Lenovo P780_ROW using Tapatalk
Click to expand...
Click to collapse
If you have KitKat use any KitKat modem. You will not brick your phone. First do a stock modem backup.
Good luck.
Sent from my Lenovo P780
stympy said:
If you have KitKat use any KitKat modem. You will not brick your phone. First do a stock modem backup.
Good luck.
Sent from my Lenovo P780
Click to expand...
Click to collapse
I have flashed Miui V6 5.4.10 KK 4.4 P780 4GB, I wish to flash the Modem V101 as most people recommend, may i know which is the V101 modem suit to my phone? Thanks.
I have flashed modem_P780_V101
After flashing V101 on miui V6 row, the bluetooth unable to pair new device but connection existing (paired) devices no issue and no robot sound.
After flashing V104 on miui V6 row, the bluetooth able to pair new device but connection existing (paired) devices with robot sound. :silly:
V52 better, no robot sound on BT earphone
What does it mean Europa or China? Is it a location of using or ROW/non-ROW versions?
Sincerely,
kam1lek
kam1lek said:
What does it mean Europa or China? Is it a location of using or ROW/non-ROW versions?
Sincerely,
kam1lek
Click to expand...
Click to collapse
In Europa section exist modem software tested in Europa.
In China section exist modem software tested in China.
There are 2 kinds of motherboards produced for Lenovo P780.
Most of them are for China and exported in Rest Of the World.
A small part is made only for ROW.
The only diference is in the hardware modem part, on the motherboard.
stympy said:
In Europa section exist modem software tested in Europa.
In China section exist modem software tested in China.
There are 2 kinds of motherboards produced for Lenovo P780.
Most of them are for China and exported in Rest Of the World.
A small part is made only for ROW.
The only diference is in the hardware modem part, on the motherboard.
Click to expand...
Click to collapse
So in Europa section are modems only tested IN Europe or tested on row lenovo's? in folder Europa i can find modems for my chinese lenovo?
Because I'm looking for new modem for lenovo p780 (china version, 4GB) vibeui (kitkat)... I live in Europe (Poland) so should I test modems from folder KitKat, then Modem Europa or China?
And after flashing a new modem do I need to wipe Dalvik? Because in some sites there are this hints...
Thanks for reply
fictionch said:
So in Europa section are modems only tested IN Europe or tested on row lenovo's? in folder Europa i can find modems for my chinese lenovo?
Because I'm looking for new modem for lenovo p780 (china version, 4GB) vibeui (kitkat)... I live in Europe (Poland) so should I test modems from folder KitKat, then Modem Europa or China?
And after flashing a new modem do I need to wipe Dalvik? Because in some sites there are this hints...
Thanks for reply
Click to expand...
Click to collapse
Hi ! The modem in Europa folder are modems tested in Europa by diferend friends from here and sended feedback!
Modem most used by me is Xakep`s modem! I live in Europa. Poland is in Europa! Sooo... try Xakep modem first.
After modem software is installed there is no need for wiping cache or Dalvik, DO NOT WIPE ANYTHING! Just reboot to system.
Most of modem software depends on your GSM operator and type of frequency thy use.
Good Luck.
fictionch said:
So in Europa section are modems only tested IN Europe or tested on row lenovo's? in folder Europa i can find modems for my chinese lenovo?
Because I'm looking for new modem for lenovo p780 (china version, 4GB) vibeui (kitkat)... I live in Europe (Poland) so should I test modems from folder KitKat, then Modem Europa or China?
And after flashing a new modem do I need to wipe Dalvik? Because in some sites there are this hints...
Thanks for reply
Click to expand...
Click to collapse
Hey Fictionch,
Please advise if you found working modem for your CHI p780.
Also kindly tell me if the broadband changes after you flash new modem (please check in System Settings ↦ Software Information ↦ About Phone at section Baseband Version before and after flashing modem).
II'm asking because I got confirmations that zip file were processed normally, but Baseband Version didn't change. Phone also didn't have range afterwards.
Thanks!
Related
Hi, I'm trying to flash my samsung with the new android 4.3 but it keeps
Go back to the original firmware no matter what firmware I flash it with
I've tried 4.0.1 official firmware (which was originally on it)
And the new 4.3
And that happened after I took it to samsung services to solve a problem happened in it
And they flashed it with the EGY firmware
Does anyone know why it keeps going back to that firmware?
And by the way I could root it normally and used it for about 2 weeks
Thank you very much for your help
Sales code : EGY
Bootloader version: I9300XXEMD3
Baseband version: I9300XXEMA5
PDA version : I9300XXEMD3
CSC version : I9300JVEMC1
thank you in advance
How and what are you flashing .
JJEgan said:
How and what are you flashing .
Click to expand...
Click to collapse
Flashing the official firmware I9300XXELL5_I9300OJVELL2_KSA android 4.3
And this supposed to be the official one for my phone
flashing it by Odin3 v3.09
If it reverts to original then either flashed file is faulty user is not following the instructions or phone is damaged .
JJEgan said:
If it reverts to original then either flashed file is faulty user is not following the instructions or phone is damaged .
Click to expand...
Click to collapse
Mmmm, flashed file is faulty no way because I've tried a couple of files
The user is not following instructions no I'm following it
The phone is damaged how it could be?? Like what is the damage?? Because I got the phone recently from samsung services after i had a problem with the imei and the phone works great
Maybe the Rom is not flashing properly. Phone should be "USB Debugging" enabled. Then please make sure you are selecting the md5 file in PDA section of Odin and also make sure that the phone is connected in Download mode (Power+Home+Vol Down - and then press Vol UP from the screen). It will show a blue color in COM section.
~ RazorMC
RazorMC said:
Maybe the Rom is not flashing properly. Phone should be "USB Debugging" enabled. Then please make sure you are selecting the md5 file in PDA section of Odin and also make sure that the phone is connected in Download mode (Power+Home+Vol Down - and then press Vol UP from the screen). It will show a blue color in COM section.
~ RazorMC
Click to expand...
Click to collapse
i did all this and made sure it is done correctly
But when I flash it
It just removes the root
But everything else stays at its
Until I do a factory reset
this is the files i've tried to flash
I9300XXELL5_I9300OJVELL2_I9300XXELKC_HOME.tar.md5 (4.3)
I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5 (4.1.2)
and i've tried the 4.1.2 before
thank you
a7medabdou said:
i did all this and made sure it is done correctly
But when I flash it
It just removes the root
But everything else stays at its
Until I do a factory reset
this is the files i've tried to flash
I9300XXELL5_I9300OJVELL2_I9300XXELKC_HOME.tar.md5 (4.3)
I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5 (4.1.2)
and i've tried the 4.1.2 before
thank you
Click to expand...
Click to collapse
As far as I checked they are both 4.1.2 firmwares so there will be no change. Visit sammobile for the latest i9300 firmware for your country.
~ RazorMC
RazorMC said:
As far as I checked they are both 4.1.2 firmwares so there will be no change. Visit sammobile for the latest i9300 firmware for your country.
~ RazorMC
Click to expand...
Click to collapse
Oh, so weird
Any way I connected my phone to kies and it said that there is an update for it
i'm trying it right now
Thank you very much
BUT WHEN I TRY TO GET THE 4.3 FROM SAMMOBILE PADGE IT RE DIRECT ME TO 4.1.2
ANY WAY UPDATING BY KIES RIGHT NOW
THANK YOU VERY MUCH
a7medabdou said:
The user is not following instructions no I'm following it
There are only three possibles and the one above is the usual suspect .
Have you checked firmware in settings ???
---------- Post added at 05:50 PM ---------- Previous post was at 05:47 PM ----------
a7medabdou said:
The user is not following instructions no I'm following it
There are only three possibles and the one above is the usual suspect .
Have you checked firmware in settings ??? before and after .
Phone should be "USB Debugging" enabled. No thats wrong see faqs and guides .
Click to expand...
Click to collapse
Click to expand...
Click to collapse
JJEgan said:
a7medabdou said:
The user is not following instructions no I'm following it
There are only three possibles and the one above is the usual suspect .
Have you checked firmware in settings ???
Click to expand...
Click to collapse
I FOUND THAT I'M FLASHING THE 4.1.2 AGAIN I THOUGHT IT 4.3 AS THE DOWNLOAD PAGE FROM SAMMOBILE DIRECTED ME THERE AS IT IS 4.3
ANY WAY I CONNECTED IT TO KIES AND IT OFFERED A NEW UPDATE SO I'M GONNA TAKE IT
AND COME BACK HERE AFTER TO TELL YOU IF MY PROBLEM HAS BEEN SOLVED OR NOT
THANK YOU FOR YOUR HELP I APPRECIATE IT
Click to expand...
Click to collapse
I have updated my phone throw Kies but it still 4.1.2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I can't get the official 4.3 in my country Egypt
Even when I searched in sammobile I only found 4.1.2 eve on the 4.3 official update page it
http://www.sammobile.com/2013/11/04...olling-out-for-samsung-galaxy-s-iii-gt-i9300/
It redirects me throw 4.1.2
i don't know what to do
!!
a7medabdou said:
I have updated my phone throw Kies but it still 4.1.2
I can't get the official 4.3 in my country Egypt
Even when I searched in sammobile I only found 4.1.2 eve on the 4.3 official update page it
http://www.sammobile.com/2013/11/04...olling-out-for-samsung-galaxy-s-iii-gt-i9300/
It redirects me throw 4.1.2
i don't know what to do
!!
Click to expand...
Click to collapse
From that page also you can check it is 4.1.2
I don't know if UAE version will work for you, but you can download from here.
~ RazorMC
RazorMC said:
From that page also you can check it is 4.1.2
I don't know if UAE version will work for you, but you can download from here.
~ RazorMC
Click to expand...
Click to collapse
Thank you for your help
but i'm afraid that it would affect my imei or sn
as i had this problem before i got my phone repaired by samsung services here in Egypt
but i think i will wait till 4.3 realease for my country
but i have a question
i can easly root my phone
and i rooted it
isn't that mean that mjy phone works normaly
and i can flash it ?
thank you again
Root can be flashed but OTA updates may fail .
a7medabdou said:
Thank you for your help
but i'm afraid that it would affect my imei or sn
as i had this problem before i got my phone repaired by samsung services here in Egypt
but i think i will wait till 4.3 realease for my country
but i have a question
i can easly root my phone
and i rooted it
isn't that mean that mjy phone works normaly
and i can flash it ?
thank you again
Click to expand...
Click to collapse
About odin, yes you can flash the firmware and your phone will work normally. Rooted does not matter for odin.
But if you are rooted then OTA update will not happen because Samsung will detect that you modified (rooted) the software.
~ RazorMC
RazorMC said:
About odin, yes you can flash the firmware and your phone will work normally. Rooted does not matter for odin.
But if you are rooted then OTA update will not happen because Samsung will detect that you modified (rooted) the software.
~ RazorMC
Click to expand...
Click to collapse
no i mean someone here said that my phone may be corrupted or something
\isn't the ability to root is sign that my phone is working fine
and about the ota i can replace it with kies or i just use a module to make the phone state normal
a7medabdou said:
no i mean someone here said that my phone may be corrupted or something
\isn't the ability to root is sign that my phone is working fine
and about the ota i can replace it with kies or i just use a module to make the phone state normal
Click to expand...
Click to collapse
Yes, your phone is ok. Maybe there was some confusion before about why firmware was not flashing. But it was same firmware so nothing wrong with your phone.
~ RazorMC
RazorMC said:
Yes, your phone is ok. Maybe there was some confusion before about why firmware was not flashing. But it was same firmware so nothing wrong with your phone.
~ RazorMC
Click to expand...
Click to collapse
thank you bro thank you very much for your help and every one else help here
see HERE
Donate a Beer if you want, to support FW always updated repository
wolfgart said:
LGF400K .V10B TOT file and DLL inside . Download
FOLLOW this guide and Steps http://forum.xda-developers.com/showthread.php?t=2475045 but using G3 files, sure
Flashtool 1.8.1
Driver
Donate a Beer if you want, to support FW always updated repository
Click to expand...
Click to collapse
ICan you upload a 400S?
Any suggestion to find 400l dll and tot?
Thanks.
updated First post : K/S/L available
LG G3 ROM
wolfgart said:
updated First post : K/S/L available
Click to expand...
Click to collapse
Could you upload to another webpage? downloading time is too long
The fact ...
KR LUCKY GOLDSTAR said:
https://mega.co.nz/#!ItVhRKBL!clC7Ng...so_Nx_6yD3Awwk
Click to expand...
Click to collapse
The fact is that the 3 tot are exactly the same, If you open the F400L tot with winhex, replace the model number and firmware version string. you should got a new F400S tot based on F400L tot
I have a f400l with loads of uplus carrier bloat ware. Will this get rid of it? Also am i able to upgrade it to a f400s?
wolfgart said:
LGF400K - v10B TOT file and DLL inside . Download
LGF400L - v10A TOT file and DLL inside . Download
LGF400S - v10B TOT file . Download
FOLLOW this guide and Steps http://forum.xda-developers.com/showthread.php?t=2475045 but using G3 files, sure
Flashtool 1.8.1
Driver
Donate a Beer if you want, to support FW always updated repository
Click to expand...
Click to collapse
More mirror:
http://inclu.net:82/LG/LG G3/
hoangnova said:
More mirror:
http://inclu.net:82/LG/LG G3/
Click to expand...
Click to collapse
Ok
jms.flynn said:
I have a f400l with loads of uplus carrier bloat ware. Will this get rid of it? Also am i able to upgrade it to a f400s?
Click to expand...
Click to collapse
With the suggestion given by wolfgart, I was able to transform a f400l into a f400k:
1) edit build.prop in system folder changing ro.model to the model you like
2) flash the firmware you desire with the info in OP using the dll and tot of the version you want to obtain.
That's all.
It's probable (I'm not sure anyway) that the three versions f400l, f400k and f400s are the same from the hardware point of view.
lukemo said:
With the suggestion given by wolfgart, I was able to transform a f400l into a f400k:
1) edit build.prop in system folder changing ro.model to the model you like
2) flash the firmware you desire with the info in OP using the dll and tot of the version you want to obtain.
That's all.
It's probable (I'm not sure anyway) that the three versions f400l, f400k and f400s are the same from the hardware point of view.
Click to expand...
Click to collapse
I also have a F400L. Can doing this have any detrimental effect on the modem? Each model has different LTE bands which I thought was hardware restricted.
Thanks
Rau said:
Could you upload to another webpage? downloading time is too long
Click to expand...
Click to collapse
Here are Mirrors hosted on my Server - 2GB Connection
http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/
jms.flynn said:
I also have a F400L. Can doing this have any detrimental effect on the modem? Each model has different LTE bands which I thought was hardware restricted.
Thanks
Click to expand...
Click to collapse
Absolutely not, at least for me here in Italy! LTE is working perfectly here in Milan, and in the mountains I had some problems to connect to UMTS with the L version firmware and no problem with the F400k. You can always go back if you have problems.
first off i wanna say thanks for these..
does anyone know which variant is the GSM and which is the CDMA?
i've already started on aosp but i started off doing the binary blobs with a system dump someone posted a week or so back..
I'm very interested in the G3 unfortunately we don't have them available in Canada so i can do so much..
If one of these variants work in Canada, and if someone finds a very good price i would be interested .. I can only do so much without the device.
thanks..
if or for those that don't know me, I'm a member of Paranoid Android and i currently have a g2 thread up on the g2 forums.
houstonn said:
first off i wanna say thanks for these..
does anyone know which variant is the GSM and which is the CDMA?
i've already started on aosp but i started off doing the binary blobs with a system dump someone posted a week or so back..
I'm very interested in the G3 unfortunately we don't have them available in Canada so i can do so much..
If one of these variants work in Canada, and if someone finds a very good price i would be interested .. I can only do so much without the device.
thanks..
if or for those that don't know me, I'm a member of Paranoid Android and i currently have a g2 thread up on the g2 forums.
Click to expand...
Click to collapse
all three korean variants are GSM only . no CDMA.
find F400K variant. Best for secret menu and frequencies.
sent from my LG G3 Metal Black
wolfgart said:
all three korean variants are GSM only . no CDMA.
find F400K variant. Best for secret menu and frequencies.
sent from my LG G3 Metal Black
Click to expand...
Click to collapse
LG after my G3 running on the original rom or. Tot and. KDZ are suspended in this picture hope you like my help with.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
vandieutot said:
LG after my G3 running on the original rom or. Tot and. KDZ are suspended in this picture hope you like my help with.
Click to expand...
Click to collapse
you have to arrive to "Factory Reset 3"
and after you can disconnect it
sent from my LG G3 Metal Black
wolfgart said:
you have to arrive to "Factory Reset 3"
and after you can disconnect it
sent from my LG G3 Metal Black
Click to expand...
Click to collapse
Can you tell me how to do better is not it. I'm hoping that it's done to this rom hope you help me with. You can not help me sir give details. Thank you very much.
vandieutot said:
Can you tell me how to do better is not it. I'm hoping that it's done to this rom hope you help me with. You can not help me sir give details. Thank you very much.
Click to expand...
Click to collapse
put your G3 in download mode another time.
start Flashatool,set dll and tot, and click on the Arrow to start process. wait it starts and don't plug off usb cable.
After you see PASS!!! on Flastool wait and don't disconnect cable until you see "Factory Reset 3" It could be necessary some minutes...
sent from my LG G3 Metal Black
wolfgart said:
put your G3 in download mode another time.
start Flashatool,set dll and tot, and click on the Arrow to start process. wait it starts and don't plug off usb cable.
After you see PASS!!! on Flastool wait and don't disconnect cable until you see "Factory Reset 3" It could be necessary some minutes...
sent from my LG G3 Metal Black
Click to expand...
Click to collapse
I thank you and I have done successfully.
So, I bought my dad a Dual SIM Galaxy A7 (2016).
Model number in settings shows as SM-A710FD but download mode shows SM-A710F.
So, obviously the stock ROM/Firmware for SM-A710F will flash fine through Odin. My question here is, will the Dual SIM function still work if I flash an A710F ROM?
Need to know for sure because I need the Dual SIM feature and I don't want to lose it by flashing the ROM for the A710F.
All replies will be appreciated.
murtaza02 said:
So, I bought my dad a Dual SIM Galaxy A7 (2016).
Model number in settings shows as SM-A710FD but download mode shows SM-A710F.
So, obviously the stock ROM/Firmware for SM-A710F will flash fine through Odin. My question here is, will the Dual SIM function still work if I flash an A710F ROM?
Need to know for sure because I need the Dual SIM feature and I don't want to lose it by flashing the ROM for the A710F.
All replies will be appreciated.
Click to expand...
Click to collapse
I too have exactly the same issue. And I too really get confused.
Some users have given the feedback. They flashed the SM - A710F Stock MM firmware ( most probably Russian) and they have no issue at all. I`ve asked them about the dual Sim functionality of this device. They said that they use only one sim and usually they can`t give any feedback. I also use dual sim with a micro sd card. That`s why I`ve not tried this one yet.
This is the only variant (A710FD), which has 2 sim card slots with a dedicated memory card slot. The others has 2 slots and one is Hybrid slot (as far as I know).
I`ve searched and googled about Stock MM firmware of A710FD, but not found yet.
Sammobile website is showing only one Stock firmware, which is 5.1.1.
Just go through this thread :
http://forum.xda-developers.com/sam...rth-buying-t3427094/post67950595#post67950595
Specially this one :
http://forum.xda-developers.com/showpost.php?p=67950595&postcount=10
Micheal86 said:
I too have exactly the same issue. And I too really get confused.
Some users have given the feedback. They flashed the SM - A710F Stock MM firmware ( most probably Russian) and they have no issue at all. I`ve asked them about the dual Sim functionality of this device. They said that they use only one sim and usually they can`t give any feedback. I also use dual sim with a micro sd card. That`s why I`ve not tried this one yet.
This is the only variant (A710FD), which has 2 sim card slots with a dedicated memory card slot. The others has 2 slots and one is Hybrid slot (as far as I know).
I`ve searched and googled about Stock MM firmware of A710FD, but not found yet.
Sammobile website is showing only one Stock firmware, which is 5.1.1.
Just go through this thread :
http://forum.xda-developers.com/sam...rth-buying-t3427094/post67950595#post67950595
Specially this one :
http://forum.xda-developers.com/showpost.php?p=67950595&postcount=10
Click to expand...
Click to collapse
The firmware will flash perfectly fine since both variants share the same A710F bootloader but nobody knows if Dual SIM works or not.
Sent from my SM-G928C
murtaza02 said:
The firmware will flash perfectly fine since both variants share the same A710F bootloader but nobody knows if Dual SIM works or not.
Sent from my SM-G928C
Click to expand...
Click to collapse
Exactly.
That is the main issue.
Micheal86 said:
Exactly.
That is the main issue.
Click to expand...
Click to collapse
dual sim works for me
ryez88 said:
dual sim works for me
Click to expand...
Click to collapse
Great.
Thanks for sharing.
Any feed back of MM is highly appreciable.
BTW, are you using 2 sim cards with a memory card ?
yes..still no prob till now..hope its going well
Sent from my SM-A710F using Tapatalk
ryez88 said:
yes..still no prob till now..hope its going well
Sent from my SM-A710F using Tapatalk
Click to expand...
Click to collapse
Hello plz I need someone's help. I have the A710FD and I want to flash the 6.0.1 710F frinware. My baseband version is PBA and I don't want to loose IMEI and network signal because of flashing. What should I do?
ryez88 said:
dual sim works for me
Click to expand...
Click to collapse
Which exact firmware did you flash?
Can you post a screenshot if possible?
Sent from my SM-G928C
murtaza02 said:
Which exact firmware did you flash?
Can you post a screenshot if possible?
Sent from my SM-G928C
Click to expand...
Click to collapse
im trying this 2 stock rom rusian&turkey..both works perfect on my a710f
turkey stock firmware(A710F)
http://www.sammobile.com/firmwares/download/86649/A710FXXU1BPG6_A710FOJV1BPG1_TUR/
russia stock firmware(A710F)
http://www.sammobile.com/firmwares/download/79953/A710FXXU1BPG1_A710FOXY1BPG1_SER
ryez88 said:
im trying this 2 stock rom rusian&turkey..both works perfect on my a710f
turkey stock firmware(A710F)
http://www.sammobile.com/firmwares/download/86649/A710FXXU1BPG6_A710FOJV1BPG1_TUR/
russia stock firmware(A710F)
http://www.sammobile.com/firmwares/download/79953/A710FXXU1BPG1_A710FOXY1BPG1_SER
Click to expand...
Click to collapse
Yeah I was thinking about flashing the Turkey A710F ROM. Will do it when I get home.
Thanks.
Sent from my SM-G928C
Quick question tho, i am on the same page here, in Indonesia the MM update is not yet available.
Is it possible if i flash with an a710f mm then if it comes out in Indonesia reflash it with the fd version?
anharaia said:
Quick question tho, i am on the same page here, in Indonesia the MM update is not yet available.
Is it possible if i flash with an a710f mm then if it comes out in Indonesia reflash it with the fd version?
Click to expand...
Click to collapse
yes..u can use russia or turkey 6.0.1 stock firmware..GL
the first A710FD 6.0.1 firmware is live now for INS csc
http://live.samsung-updates.com/index.php?device=SM-A710FD
fast download using SamFirm app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
iNTER5LOve said:
the first A710FD 6.0.1 firmware is live now for INS csc
http://live.samsung-updates.com/index.php?device=SM-A710FD
fast download using SamFirm app
Click to expand...
Click to collapse
woww great
anharaia said:
Quick question tho, i am on the same page here, in Indonesia the MM update is not yet available.
Is it possible if i flash with an a710f mm then if it comes out in Indonesia reflash it with the fd version?
Click to expand...
Click to collapse
Yes and yes.
That's what I'm planning on doing too.
Gonna flash Turkish A710F and then flash UAE MM when it comes for the FD variant.
Sent from my SM-G928C
Here is the Sammobile link for Stock MM for A710FD (Indian).
http://www.sammobile.com/firmwares/database/SM-A710FD/
ryez88 said:
im trying this 2 stock rom rusian&turkey..both works perfect on my a710f
turkey stock firmware(A710F)
http://www.sammobile.com/firmwares/download/86649/A710FXXU1BPG6_A710FOJV1BPG1_TUR/
russia stock firmware(A710F)
http://www.sammobile.com/firmwares/download/79953/A710FXXU1BPG1_A710FOXY1BPG1_SER
Click to expand...
Click to collapse
can you provide me best site to download this from my phone.sammobile wont start download.
thanks.
skippedreality said:
can you provide me best site to download this from my phone.sammobile wont start download.
thanks.
Click to expand...
Click to collapse
Use SamFirm instead.
Sent from my Nexus 6P
murtaza02 said:
Use SamFirm instead.
Sent from my Nexus 6P
Click to expand...
Click to collapse
link to download samfirm will be higly appreciated.
thanks
i got it
I've seen a few questions about downgrading from 6.0.1 to 5.1.1 and that odin won't allow it.
It's because of secure bootloader, that won't allow downgrade of binary version.
I've made a flashable zip for twrp of the latest 5.1.1 released with csc NEE. (because thats my region)
This will leave your current bootloader version and baseband version, compared to the odin file.
I just did some very light debloating of some microsoft crap as far as I can remember. Maybe some google app as well, like hangout.
No root added, no tweaks, just pretty much stock. Edit: Forgot to mention it's deodexed and zipaligned.
Thought I could share it if anyone needs it.
DOWNLOAD AFH:A310F_5.1.1_NEE.zip
MEGA MIRROR:A310F_5.1.1_NEE.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice work! Can you do the same for 6.0.1? Since 7 came out I'm stuck there and can't downgrade.
mcpossity said:
Nice work! Can you do the same for 6.0.1? Since 7 came out I'm stuck there and can't downgrade.
Click to expand...
Click to collapse
Hi, thanks.
Since the last MM update, our bootloader got upgraded to binary 3. Same as Nougat.
It should be possible to downgrade with odin using one of the latest released MM firmwares. One that starts with A310FXXU3.
Don't forget to back up data and factory reset before you do, otherwise you'll probably end up in a bootloop problem.
tys0n said:
Since the last MM update, our bootloader got upgraded to binary 3. Same as Nougat.
It should be possible to downgrade with odin using one of the latest released MM firmwares. One that starts with A310FXXU3.
Click to expand...
Click to collapse
Yeah, I know, but I want to downgrade to an earlier version of 6.0.1 which has still the old bootloader with binary 2...
mcpossity said:
Yeah, I know, but I want to downgrade to an earlier version of 6.0.1 which has still the old bootloader with binary 2...
Click to expand...
Click to collapse
Not possible unless you modify the .tar.md5 by removing the .bin files in it, then tar it up and flash in odin.
The secure bootloader (sboot.bin) won't allow the downgrade of itself. Needs to be left at U3.
Modem (modem.bin) must also be left at U3, because downgrade modem to U2 while keeping the U3 bootloader will leave you with unknown network or IMEI loss untill upgraded again.
Same with cm.bin. It needs to be left at U3 afaik.
tys0n said:
Not possible unless you modify the .tar.md5 by removing the .bin files in it, then tar it up and flash in odin.
Click to expand...
Click to collapse
Thank you, that worked!! I'm surprised myself because I had tried it before with only sboot.bin removed and it had failed. Now the flash went through seamlessly.
tys0n said:
I've seen a few questions about downgrading from 6.0.1 to 5.1.1 and that odin won't allow it.
It's because of secure bootloader, that won't allow downgrade of binary version.
I've made a flashable zip for twrp of the latest 5.1.1 released with csc NEE. (because thats my region)
This will leave your current bootloader version and baseband version, compared to the odin file.
I just did some very light debloating of some microsoft crap as far as I can remember. Maybe some google app as well, like hangout.
No root added, no tweaks, just pretty much stock. Edit: Forgot to mention it's deodexed and zipaligned.
Thought I could share it if anyone needs it.
DOWNLOAD:A310F_5.1.1_NEE.zip
View attachment 4166300View attachment 4166301View attachment 4166302
Click to expand...
Click to collapse
Can you do this for A510F? Please?
Help in A7 (SM-A720F ZTO)
tys0n said:
Not possible unless you modify the .tar.md5 by removing the .bin files in it, then tar it up and flash in odin.
The secure bootloader (sboot.bin) won't allow the downgrade of itself. Needs to be left at U3.
Modem (modem.bin) must also be left at U3, because downgrade modem to U2 while keeping the U3 bootloader will leave you with unknown network or IMEI loss untill upgraded again.
Same with cm.bin. It needs to be left at U3 afaik.
Click to expand...
Click to collapse
I need to do this on an SM-A720F, but I do not know. Could someone do it for me? I am willing to even make a donation through Paypal. :good:
To go by Odin.
In this firmware:
ammobile.com/firmwares /galaxy-a7/SM-A720F/ZTO/download /A720FXXU1APLI/123200/
msoaresantos said:
I need to do this on an SM-A720F, but I do not know. Could someone do it for me? I am willing to even make a donation through Paypal. :good:
To go by Odin.
In this firmware:
ammobile.com/firmwares /galaxy-a7/SM-A720F/ZTO/download /A720FXXU1APLI/123200/
Click to expand...
Click to collapse
Hi. Do you need specificly that firmware or you just want to downgrade from Nougat?
If you need to downgrade from N, here's also a newer 6.0.1 for ZTO, A720FXXU2AQFA which I think should work for downgrade.
http://updato.com/firmware-archive-select-model?record=161D5BBD669011E7963AFA163EE8F90B
tys0n said:
Hi. Do you need specificly that firmware or you just want to downgrade from Nougat?
If you need to downgrade from N, here's also a newer 6.0.1 for ZTO, A720FXXU2AQFA which I think should work for downgrade.
I really need the A720FXXU1APLI firmware!
Thanks !
Click to expand...
Click to collapse
can't flash xposed-v86.1-sdk22-arm64 on my A310F, "ROM A310F_5.1.1_NEE"
please help
qazqaz1970 said:
please help
Click to expand...
Click to collapse
Use arm instead of arm64, and use xposed for samsung by wanam :good:
tys0n said:
Use arm instead of arm64, and use xposed for samsung by wanam :good:
Click to expand...
Click to collapse
xposed-v81.0-sdk22-arm-custom-build-by-wanam work perfect
thank's.
tys0n said:
I've seen a few questions about downgrading from 6.0.1 to 5.1.1 and that odin won't allow it.
It's because of secure bootloader, that won't allow downgrade of binary version.
I've made a flashable zip for twrp of the latest 5.1.1 released with csc NEE. (because thats my region)
This will leave your current bootloader version and baseband version, compared to the odin file.
I just did some very light debloating of some microsoft crap as far as I can remember. Maybe some google app as well, like hangout.
No root added, no tweaks, just pretty much stock. Edit: Forgot to mention it's deodexed and zipaligned.
Thought I could share it if anyone needs it.
DOWNLOAD:A310F_5.1.1_NEE.zip
View attachment 4166300View attachment 4166301View attachment 4166302
Click to expand...
Click to collapse
Many thanks for sharing! I've tested this one as I wanted just to take a deeper look at 5.1.1 on A3 2016 (My phone when unboxed immediately started upgrade to 6.0.1 so I did not have much time to play around with 5.1.1). I am quite surprised with the performance. The 5.1.1 is surely a beastie. Unfortunately I've got used to some Nougat features (reply from notifications, centered lockscreen "big" clock, quite powerful doze mode saving a lot of juice from the battery) and decided to go back to 7 which I use currently as a daily driver.
link update
hi guys please link update 50kb/s :crying: :crying: please plase emergency
French ?
A big thank you for your post and your work. If I put in place your NEE file, would I have the firm in French? It's good with TWRP that we put in place?
I do not understand a word of English and have to go through a translator.
Thanks again
menuisier3 said:
A big thank you for your post and your work. If I put in place your NEE file, would I have the firm in French? It's good with TWRP that we put in place?
I do not understand a word of English and have to go through a translator.
Thanks again
Click to expand...
Click to collapse
Hi. Yes, flash it with twrp. French language should be included.
Added mega mirror. AFH seem to have problems lately.
Hi!
Thanks a lot for this stock rom!
The battery life and speed it's better than nougat.
But I have a question, can you make the same stock rom based on 6.0.1?
I don't have a PC to extract a rom from firmware, and I searched a lot a flashable stock 6.0.1.
Sorry for my bad english and thanks again!
help!! help!!
Can you do for the A710f? Please??
Hello everyone.
I bought a japanese Xperia 1 III (Softbank version A101SO) with Android 12 and I've searched for the 13 update but it turns out Softbank didn't release Android 13 on this phone yet.
So I decided to flash the KDDI version to it (with newflasher) and it worked.
But the problem is I got a very weak signal, a battery drain and the 4G rarely appears (always H or H+)
I tried to come back to the old original firmware but the phone won't boot after the flashing process (rollback protection)
The phone has a locked bootloader and it says it can't be unlocked so I wonder if you have a solution for me because I lost all hope right know.
If I can just go back to its original firmware (Android 12 from Softbank) that's all that I need right know.
Thak you for your answers.
Unless you unlock your bootloader, otherwise, you cannot go back to Android 12 again. If your phone's config name 'Bootloader unlock allow' is No, then you have to stick around with KDDI Android 13 fw.
FiDra said:
Unless you unlock your bootloader, otherwise, you cannot go back to Android 12 again. If your phone's config name 'Bootloader unlock allow' is No, then you have to stick around with KDDI Android 13 fw.
Click to expand...
Click to collapse
Thanks for your reply! I'll have to stick with it then...
But can I flash the Softbank modem to it to have a better signal coverage?
I think cross flashing is okay but you need to do some search to make sure you flash all needed files to prevent boot loop.
FiDra said:
I think cross flashing is okay but you need to do some search to make sure you flash all needed files to prevent boot loop.
Click to expand...
Click to collapse
crossflashing works but the problem is the Signal and the battery drain.
is there a way to flash other modem files to the phone?
Try newflasher, you can search the forum for the guide.
FiDra said:
Try newflasher, you can search the forum for the guide.
Click to expand...
Click to collapse
Newflasher is the tool to flash the roms.
I know how to use it since I've crossflashed my Xperia 1 III with another region FW using it.
My question is: is there a way to flash different modem files (and other important files) to the phone with a different region rom to fix the signal and battery drain issues?
Samuël_Fab said:
Newflasher is the tool to flash the roms.
I know how to use it since I've crossflashed my Xperia 1 III with another region FW using it.
My question is: is there a way to flash different modem files (and other important files) to the phone with a different region rom to fix the signal and battery drain issues?
Click to expand...
Click to collapse
Yes just keep the .Sin files that you fish to flash and remove the rest from the rom folder. And make sure when prompted by Newflasher to "keep user data".
bentree said:
Yes just keep the .Sin files that you fish to flash and remove the rest from the rom folder. And make sure when prompted by Newflasher to "keep user data".
Click to expand...
Click to collapse
ohh! thanks for your tip!
I want to ask you:
do you know the name of the modem files that control the network?
Samuël_Fab said:
ohh! thanks for your tip!
I want to ask you:
do you know the name of the modem files that control the network?
Click to expand...
Click to collapse
Modem.Sin is the file you are after.
bentree said:
Modem.Sin is the file you are after.
Click to expand...
Click to collapse
So I've successfully flashed the modem sin file but there's a problem with the camera.
It refuses to launch and the Telephoto lenses are moving all the time (with the noise of the lens moving).
But the signal is back at 4G.
Samuël_Fab said:
So I've successfully flashed the modem sin file but there's a problem with the camera.
It refuses to launch and the Telephoto lenses are moving all the time (with the noise of the lens moving).
But the signal is back at 4G.
Click to expand...
Click to collapse
no idea with that one... sorry
bentree said:
no idea with that one... sorry
Click to expand...
Click to collapse
I guess flashing it with other modem sin files don't resolve the issue.
I need to wait for the Softbank Android 13 (if it will be released one day...)
Thanks to you and people on this post, I've been able to flash fw 61.1.E.5.215 into my A101SO and fix mobile connection and camera by flash .sin file from A101SO android 12 fw. If you still struggle with the camera, let me know. I've seen improvement with battery life and mobile signal, the only let down is netflix wont install from playstore nor playback at full fidelity if I install with apk
Samuël_Fab said:
I guess flashing it with other modem sin files don't resolve the issue.
I need to wait for the Softbank Android 13 (if it will be released one day...)
Click to expand...
Click to collapse
Bachtran24 said:
Thanks to you and people on this post, I've been able to flash fw 61.1.E.5.215 into my A101SO and fix mobile connection and camera by flash .sin file from A101SO android 12 fw. If you still struggle with the camera, let me know. I've seen improvement with battery life and mobile signal, the only let down is netflix wont install from playstore nor playback at full fidelity if I install with apk
Click to expand...
Click to collapse
what file did you flash for the Camera?
Ainz_Ooal_Gown said:
what file did you flash for the Camera?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After I succesfully flashed a bootable fw (XQ-BC72_Customized SEA_61.2.A.0.447 for me), I flash these .sin files from A101SO_SoftBank JP_61.1.E.5.215 right after. The camera problem only rise if you also flash modem_X-FLASH-ALL-4BA8.sin
Bachtran24 said:
View attachment 5922171
After I succesfully flashed a bootable fw (XQ-BC72_Customized SEA_61.2.A.0.447 for me), I flash these .sin files from A101SO_SoftBank JP_61.1.E.5.215 right after. The camera problem only rise if you also flash modem_X-FLASH-ALL-4BA8.sin
Click to expand...
Click to collapse
Hi @Bachtran24 if i understood you correctly then you have installed a Dual XQ-BC72 to your single SIM A101so version and then flashed the modem files and it worked for you?.
Can you please exactly tell which modem files you flashed? in the ROM folder there are 3 modem files.sin.
When you flashed modem.sin filers which ROM folder did you use BC-72 or A101so.
I have the same issues i have updated to global Dual ROM and now my A101so is not getting any signals. looking for your help
crazycolor786 said:
Hi @Bachtran24 if i understood you correctly then you have installed a Dual XQ-BC72 to your single SIM A101so version and then flashed the modem files and it worked for you?.
Can you please exactly tell which modem files you flashed? in the ROM folder there are 3 modem files.sin.
When you flashed modem.sin filers which ROM folder did you use BC-72 or A101so.
I have the same issues i have updated to global Dual ROM and now my A101so is not getting any signals. looking for your help
Click to expand...
Click to collapse
Did you see the picture, just flash those 4 from A101SO_SoftBank JP_61.1.E.5.215 folder, delete other. Reply if you cant see the pic, i'll put it in context
Bachtran24 said:
Did you see the picture, just flash those 4 from A101SO_SoftBank JP_61.1.E.5.215 folder, delete other. Reply if you cant see the pic, i'll put it in context
Click to expand...
Click to collapse
thank you for your reply. i can see the picture and got the answer that i should use A101SO folder for secondary flashing. thanks!