[Rom][Linaro][All-F2FS][28-05-2014] Resurrection Remix v5.1.3 - Nexus 5 Android Development

Hey guys what's up
I just wanted to post this to make it easier for people moving to the F2FS scene.
The rom is officially from this thread http://forum.xda-developers.com/goo...m-resurrection-remix-4-4-2-kitkat-v5-t2706610
But then with the All-F2FS included with a custom kernel.
First of all this will wipe your Cache, System and Data partition.
If you're feeling not really safe formatting all these partitions to a different format because it might bricks orsomething just get a USB stick and your good to go
The thing with F2FS is that it requires the ROM to be compatible but also the Kernel.
If the kernel is not supporting it but the ROM is then Cache will not be mounted! or your kitten will be eaten
First download all the requires files from here: https://mega.co.nz/#!JJZgAJpa!cWSnKkKJtldaIianGisyuV7OQ9vp4Lpje4PFQUTvX8Y
The .rar contains the following:
boot.img <- custom boot.img if not flashed it will not boot!
FormatPartitions-mako <- thanks to http://forum.xda-developers.com/goo...t/recovery-twrp-2-7-0-0-f2fs-support-t2746030
linaro.Kernel-nightly-r51-linaro <- custom kernel provided by http://forum.xda-developers.com/goo...ernel-linaro-kernel-r32-3-4-76-4-4-2-t2527130
openrecovery-twrp-2.7.0.0-hammerhead-All-F2FS-2.img <- TWRP with F2FS support
pa_gapps <- just the google apps, made no modifications to it
Resurrection_Remix_KK_v5.1.3-20140526-hammerhead <- the ROM, repacked with F2FS
fastboot-windows <- Provided by ChainFire
Ok so when you have that downloaded let's begin shall we :victory:
1. Backup your SD Card data to your pc as this will get wiped!
2. Copy all the files you downloaded to your internal sd card.
3. Go into the bootloader (hold volume lower + power)
4. On your pc Open CMD and go to the Fastboot directory
5. Now type "fastboot-windows flash recovery openrecovery-twrp-2.7.0.0-hammerhead-All-F2FS-2.img", file not found ? drag/drop the TWRP recovery
6. Wait for it to show DONE, now reboot into recovery
7. Flash the FormatPartitions.zip, from this point it will format your Cache and System to F2FS
8. Reboot again but in recovery, do NOT do a simple reboot/shutdown or reboot into system as this will keep bootlooping untill you've reformated or flashed stock rom
Flashing part, do NOT wipe cache/dalvik etc!
9. Flash Resurrection_Remix_KK_v5.1.3-20140526-hammerhead.zip
10. Flash pa_gapps-stock-4.4.2-20140517-signed.zip
11. FLash linaro.Kernel-nightly-r51-linaro.zip
12. Go back to the main menu and hit the wipe button, now do a Data Partition Wipe (button at the right) and type in "yes" and hit enter, it will now Format your Data partition to F2FS
13. Now reboot into Bootloader, hitting excidently reboot to system ? turn the phone off and reboot into bootloader
14. Now let's flash the boot.img to fix the bootloops, or you must be a lover of the startup animation :victory:
15. Go back to your CMD and type in "fastboot-windows flash boot boot.img", file not found ? drag/drop the boot.img
16. Well at this point you're able to reboot and say hello to F2FS with linaro :victory:
17. When booted simply follow the installs steps or just keep pressing continue...
18. Go into settings -> developer options, scrolldown and switch from DALVIK to ART, will even speed it up more :victory:
If you're afraid you can't go back to EXT4 (official), no worries you can go back to EXT4 by flashing the stock rom/firmware
http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701?
The boot.img provided above is only for CM/CAF roms and shall not be used on different rom's like AOSP !
I hope you liked this tutorial, have fun :good:

umm... did i even test this..? cos its just impossible to boot with linaro kernel.
It doesnt support f2fs and the most important part is its a kenel meant for AOSP not for CM/CAF which u stated as the ROM to be.
And exchange step14 with step11. Flashing AOSP kernel on CM based ROM is causing the bootloop.
And for step16, if u really got linaro to boot on cm based rom u must be GOD.

kdh2834 said:
umm... did i even test this..? cos its just impossible to boot with linaro kernel.
It doesnt support f2fs and the most important part is its a kenel meant for AOSP not for CM/CAF which u stated as the ROM to be.
And exchange step14 with step11. Flashing AOSP kernel on CM based ROM is causing the bootloop.
And for step16, if u really got linaro to boot on cm based rom u must be GOD.
Click to expand...
Click to collapse
Uploading now a different repacked version, accidently uploaded my wrong build of the rom
But no clue for the AOSP kernel (on kernel thread it stated CM), It booted for me and it's sooo fast :victory:
Re-uploaded the files, please try this
https://mega.co.nz/#!JJZgAJpa!cWSnKkKJtldaIianGisyuV7OQ9vp4Lpje4PFQUTvX8Y

DragonHunt3r said:
Uploading now a different repacked version, accidently uploaded my wrong build of the rom
But no clue for the AOSP kernel (on kernel thread it stated CM), It booted for me and it's sooo fast :victory:
Re-uploaded the files, please try this
https://mega.co.nz/#!JJZgAJpa!cWSnKkKJtldaIianGisyuV7OQ9vp4Lpje4PFQUTvX8Y
Click to expand...
Click to collapse
Oh yea it says CAF My bad. But its impossible if u dont mod the ramdisk and just download it from the original thread as it doesnt support f2fs (now dont say "in the thread its written f2fs supported")
Im just saying to cause less confusion for the ones who r not used to f2fs
Sent from my Nexus 5 using XDA Free mobile app

kdh2834 said:
Oh yea it says CAF My bad. But its impossible if u dont mod the ramdisk and just download it from the original thread as it doesnt support f2fs (now dont say "in the thread its written f2fs supported")
Im just saying to cause less confusion for the ones who r not used to f2fs
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I repacked the rom, check the thread and the download also contains the rom which is repacked to work with f2fs
This thread was pretty much to make it easy for those people so I rather not upload a non repacked version hah

DragonHunt3r said:
I repacked the rom, check the thread and the download also contains the rom which is repacked to work with f2fs
Click to expand...
Click to collapse
Rom doesnt matter. Yes it matters but read again. Im not stating anything about the rom. The thing im trying to convince to u is that the kernel just wont work if u download it from the original thread as u stated the link to the original linaro kernel thread
Sent from my Nexus 5 using XDA Free mobile app

kdh2834 said:
Rom doesnt matter. Yes it matters but read again. Im not stating anything about the rom. The thing im trying to convince to u is that the kernel just wont work if u download it from the original thread as u stated the link to the original linaro kernel thread
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
That's true which even I noticed, that why you have to flash the boot.img to make it work again
Everything is included in the download above from MEGA so following the steps should simply work

DragonHunt3r said:
That's true which even I noticed, that why you have to flash the boot.img to make it work again
Click to expand...
Click to collapse
.... flashing that boot.img will just remove all linaro kernel stuff and itll just end up with flashing boot.img (which i suppose its dennes544 cm kernel)
Just take a screenie of the about phone (Kernel Version).
and did u build the rom again with linaro toolchain, or just put [Linaro] in ur thread title cos it involves in flashing linaro kernel?

kdh2834 said:
.... flashing that boot.img will just remove all linaro kernel stuff and itll just end up with flashing boot.img (which i suppose its dennes544 cm kernel)
Just take a screenie of the about phone (Kernel Version).
and did u build the rom again with linaro toolchain, or just put [Linaro] in ur thread title cos it involves in flashing linaro kernel?
Click to expand...
Click to collapse
I agree with you.
Just tried and found that the ROM don't support f2fs all.
Converted the ROM and used charizardx caf f2fs all with no boot.
There is some thing wrong with your ROM man.

mekayzer said:
I agree with you.
Just tried and found that the ROM don't support f2fs all.
Converted the ROM and used charizardx caf f2fs all with no boot.
There is some thing wrong with your ROM man.
Click to expand...
Click to collapse
If you follow the steps correctly it should just boot, try following my thread first before making changes :angel:

DragonHunt3r said:
If you follow the steps correctly it should just boot, try following my thread first before making changes :angel:
Click to expand...
Click to collapse
I'm using f2fs 4 month ago, converted dozen rom to work with f2fs.
Used all kernel with f2fs support.
Why this rom cannot be converted, there is some thing wrong.
For you knowing :
- i converted original rom from original thread
- no linaro with caf and f2fs
- ART is broken on f2fs
Good day, my last post in this thread

Just bring the post down. U lack basic knowledge such as flashing a kernel.
U just taking others work and posting it.
And still my questions r not answered.
I wonder if u really tested it urself.
Pls post a screenshot of ur about phone running with linaro r51v3. Cos its not possible from the first place.
Ur thread title is also an error. Its not the kernel that u can just put [Linaro]. U have to complie the ROM with linaro toolchain again. If u meant it that way anyone can post others ROM and linaro kernel saying as linaro ROM which just don't make sense..
Sent from my Nexus 5 using XDA Free mobile app

THREAD CLOSED ON OP's REQUEST

Related

[15/12][NEW DUAL BOOT PROCEDURE][Secondary OS][Dual Boot AOSP and Sammy]

Hey guys!!
I'm here to introduce you the first Dual ROM for this device!!
Haven't you ever wanted to have the speed and awesomeness of AOSP ROM but without missing the special features of Stocks ROM (Tv OUT and so on.)?!?
This prebuild flashable zips I made allows you to install and boot into 2 different OSes according to the way you start the phone.
I wanted to start telling you that nothing would have been possible without the inventor of the special kernel inside the ROMs HellcatDroid and this is the kernel's thread if you need more info about it!
How this works?
There's a special kernel inside the ROM which is the same both for Sammy and for AOSP ROM which boot into a os (primary) just booting up the phone as we normally do. The secondary OS boots when you press the Recovery Combo. The recovery starts if you power off the phone and attach the charger.
here's a video explaining how it works :
VIDEO
Downloads and new procedure
I completely changed the procedure and the way you should dualboot...so this is the NEW procedure :
1)Go to recovery, make a nandroid backup and then wipe all your data (strongly suggested)
2)Install the ROM you want for PRIMARY OS (you can choose the one you mostly like here on xda!)
3)Then and only then choose between these beautiful ROMs for your SECONDARY OS :
CheckROM v4
MIUI 9.12
CM7
4)Enjoy!
IF YOU WANT TO RESTORE EVERYTHING BACK :
Install via CWM this package : RESTORE OS
This will delete your secondary OS permanently and leave just your primary with Siyah kernel
Changelog
-Brand NEW procedure!
-Restore Primary OS option
-CheckROM v4
OLD Downloads
Here's the most sweet part...
each ROM has a primary OS (more space and boots as you normally do) and a secondary OS (less space and boots with recovery combo)...
It depends on your preferences...however here it is :
http://www.multiupload.com/Y357LP81T9 > Clean Sammy (primary) MIUI (secondary)
http://www.multiupload.com/ZWGKORKUC4 > Clean Sammy (primary) CM7 (secondary)
http://www.multiupload.com/OCAVFNEL0N > MIUI (primary) Clean Sammy (secondary)
http://www.multiupload.com/RO00M8UC7P > CM7 (primary) Clean Sammy (secondary)
Final notes and instruction
Please just boot into ROMs and Recovery as it's shown in the video!!
DONT USE REBOOT TO RECOVERY or similar command because it can make you to be stucked in a single ROM!!!
The most stable ROMs are the one with Sammy ROM as primary just because it requires more space than AOSP but the others runs good as well.
THE SECONDARY OS HAS NOT SO MUCH SPACE!!! So you can't install many apps on it.
This thread is for development only. so if you have a suggestion send me a PM.
If you want me to create other ROMs just ask me and if you have technical problems write here in the thread and I'll try to answer to most of you.
I'll make further development just if I see that it is interesting for you as I am a very busy person!
If you want to edit your preference you can use lolboot app on the market here :
https://market.android.com/details?id=net.hellcat.droiddev.lolboot
Credits
-HellcatDroid for his kernel and his precious instructions
-Siyah for the base of this kernel which is able to run on every ROM!!
-CM7 team and MIUI for their beautiful ROMs
-Samsung for his good stock ROM
-LeoMar75 and GadgetCheck (visit CheckROM's thread here)
Enjoy and IF you want to contribute look at my signature and DONATE
Gonna try this!!!:d
To get the TV Out feature, can I use CM7 as primary and Sammy as secondary?
This would be just great for testing out beta/experimental ROMs on one partition without hampering your primary driver.
Good work mate!
Willl try awesome dude
Jibreil said:
This would be just great for testing out beta/experimental ROMs on one partition without hampering your primary driver.
Good work mate!
Click to expand...
Click to collapse
Or you can just do a nandroid...
pcboyy said:
To get the TV Out feature, can I use CM7 as primary and Sammy as secondary?
Click to expand...
Click to collapse
Thank you for the interest guys!!
However sure you can!!
It's uploading...that's what I do...I leave Stock ROM as secondary just for TV out and enjoy the awesomeness of AOSP as primary...
PS More has to come...slighter Stock ROM and better optimized AOSP...if you have any questions or suggestions please let me know!!
EDIT : New ROM Added!!
This seems to be one of the best things happened to SGS II in recent times, awesome!
Sent from my GT-I9000 using XDA App
what if battery complitly dies ? then can we charge it or it would go to recovery without charge???
and can we change the files inside preload folder with new MIUI (For example change it with the latest update for next week) ( if it's already MIUI ) or not ???
or can we change the main file(Primary files) with new weekly MIUI ( IF it's already miui as primary ) ?
Can this samsung one change to checkrom v4??
Sent from my GT-I9100 using XDA Premium App
Henrywcy81 said:
Can this samsung one change to checkrom v4??
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Yes...it could...but you should ask the permission to the ROM's dev first...and only then I'll start to make a double ROM with it...
If the battery dies you can attach the charger and it will charge your battery even if it's in recovery...wait some minutes and then reboot...and it's done...
If MIUI or CM7 is PRIMARY you can directly update it with the weekly package provided by the ROM team...it's fair...
if you have MIUI or CM7 as SECONDARY you should change the updater script of the secondary or change the preload dir as you said...
however if there'll be a great interest I'm gonna update it very very frequently...so there'll be no need to do this...
I'm going to make the Samsung ROM much lighter...MIUI or CM7 ROM as PRIMARY is however the best choise if you want to stay up to date with these ROMs...
Cheers dude!
And thank you for the interest shown...
thank you alot...
yes
miui would be a great idea as a primary and sammy as second ...
now...
i'm going to flash this amazing ROM/KERNEL/ ( don't know what should we call it ... but it's great ... )
but one last question ....
if we update through rom updater in the miui what would happend to kernel ???
---------- Post added at 03:47 PM ---------- Previous post was at 03:22 PM ----------
WOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOW...
it's VERY CLEAN... FAST... Without ANY Problem ...
just i should test the Battery/wifi/Bluetooth and ... just because of new kernel ...
thank you so much
keep UP the GOOD and Amazing work...
Quick question: the Japanese SGS2 (the sc-02c) is a bit kernel needy, and thus really only responds to siyah kernel and stock. If I install this rom, but then reflash siyah's kernel, am I just wasting time?
I cant get it work. I am stuck at boot screen.
1 Problem :
for the first time i flashe sammy+miui and every thing goes well
but then i flashed miui+sammy and it's not going to recover as you mentioned at OP
please help...
i don't know what to do...
i want Flash RTL Patch on my miui ( Which is the primary rom for me )
What version of Siyah is being used to power this? Thx.
Also why not link to hellcat's app?
Doesn't work for me either. Installed Sammy as primary as miui as secondary. Phone now only boots into miui whether I hold recovery buttons or not. Also phone does not boot into recovery so I now need to flash back via ODIN.
Lolboot
If anybody has it working could you install lolboot from market and check if it works with it?
nilsido said:
I cant get it work. I am stuck at boot screen.
Click to expand...
Click to collapse
jimhaddon said:
Doesn't work for me either. Installed Sammy as primary as miui as secondary. Phone now only boots into miui whether I hold recovery buttons or not. Also phone does not boot into recovery so I now need to flash back via ODIN.
Click to expand...
Click to collapse
Please keep in mind that it's still under development and I need some time to make it work properly...I'm going to put fast link to boot into a OS using a simple command in the other ROM...
Probably you used command like "boot in recovery" or something similar...the kernel made by HellcatDroid is still under dev and need some fixes...
You could just install another normal kernel and go back to recovery with the classic combo...
bclark said:
What version of Siyah is being used to power this? Thx.
Also why not link to hellcat's app?
Click to expand...
Click to collapse
It's 2.0 however the first thing I made is to link everybody to HellcatDroid thread in which there's a section for his app...
NO OTHER KERNEL ARE SUPPORTED FOR THE MOMENT!
I'm sorry...
I'll continue my development to make it much stabler...for the time being it do need some fixes...I totally agree with you...

[ROM] (21/5/12) Renaissance for YP-G1 V3.0 (FINAL)

I decided to make my first custom rom. The main difference over klin1344's klassic is the fact that we can customize what we want with the aroma installer. As of now, there's no customised interface (and there will not be. Consider this like WT Ho's rom for the 5.0).
I stop working on it because I want to try something other than stock. Also thanks for your consideration for this rom. (I will continue the maintenance of it though)
Features:
- Stock 2.3.6 XXKPQ
- Rooted
- Busybox
- Deodexed
- Zipaligned
- Aroma installer: An interactive installer
- Multiple bootanimations.
- Choice between TW 3.0, TW 4.5, Go launcher EX, Xperia S launcher
- Possibility to install DSP manager and voodoo app (for sound enchance)
- Features the CWM 5.0.2.7 (Intl Only. Kernel based from steve's 3.0) (V.1.0)
- US users will recieve the latest klin's R2 custom kernel* (V.1.0).
- Intl and US compatibility in a single zip. (v.2.0)
- SuperSU (v.3.0)
Changelog:
Code:
[B]V.3.0 (Vita) FINAL [/B]
- Deodexed and Zipaligned
- SuperSU is used instead of SuperUser
- Updated Google Play Store, Maps and Youtube app (Can play 720p) (It's real this time)
- Possibility to add Antutu Cpu Master Free (For Overclock)
[B]V.2.0 (Radiance)[/B]
- Name changed only to Renaissance
- Possibility to chose the device type (Thanks to dark_valor's Terra Silent)
- New Honeycomb bootanimation
- Possibility to add terminal to the rom
[B]v.1.0 (Etincelle)[/B]:
- Initial Release.
Download:
1.0
Intl: Intl Renaissance 1.0 Download
US: US Renaissance 1.0 Download
2.0: Renaissance 2.0 Download
3.0: Renaissance 3.0 Download
If you want there's the Xperia S Wallpapers: Xperia S Wallpapers Download
If there's a problem with antutu, install the apk here: Cpu Master Apk Download
If there's a problem with terminal reinstall it.
Instructions:
1. Boot into Cwm
2. Backup
3. Wipe data (BEFORE IT IS MANDATORY)
4. Run renaissance-device.zip
5. Follow the instructions.
6. Reboot
7. Enjoy!
If you do like please hit thanks button. If you have problem with installation, Send me .log file in aroma. If it's problem with the rom please let me know.
Thanks to:
amarullz: for Aroma installer
Klin1344, SteveS and stratosk for the kernel related things.
WT Ho for his base for aroma installer. (and help too )
GO Dev Team , Fr4gg0r and ra3al for their launcher
Dark_balor for his kernel (terra silent)
Jackpal for the terminal emulator
Antutu for the CPU Master
As this is the last version, If you want to use something in the rom (porting) ask me first.(Mostly for Aroma)
These are the possible implementations (suggestions)
- Deodex
- Performance tweaks
- More customisation options
- Better compatibility with apps (Like deviceID hack)
reserved again
screenshots please?
EcHoFiiVe said:
screenshots please?
Click to expand...
Click to collapse
Oh sorry about that. I will put them tomowrrow. (that depends which screenshots you want?)
Is ext4 enabled for data and dbdata? From stock its stuck at rfs.
Wheatly said:
Is ext4 enabled for data and dbdata? From stock its stuck at rfs.
Click to expand...
Click to collapse
Well I didin't enable ext4 so data and dbdata will be stuck at rfs. Sorry about that.
Does the CWM 5 in the kernel I gave you work well? Because when I gave it to you there seemed to be a lot of errors... But if it does, I'll probably apply those changes back to my kernel again and update to cwm 5 because it allows easier converting to ext4. Also, did stratosk give you permission because I used his cwm recovery files from his sources. (just making sure, so he doesn't come and flame me for porting cwm5 from his sources without permission)
Sent using Tapatalk
When you sent it to me back then it wasn't working well. So I fixed the errors on it (I did send a PM for you for testing). I do got permission from stratosk (that's why I put him in the thanks section.) I think I have the US kernel in my mediafire account. I'll upload it so both devices will have justice.
zaclimon said:
When you sent it to me back then it wasn't working well. So I fixed the errors on it (I did send a PM for you for testing). I do got permission from stratosk (that's why I put him in the thanks section.) I think I have the US kernel in my mediafire account. I'll upload it so everyone will have justice.
Click to expand...
Click to collapse
Ok thanks. But how exactly did you fix it? I didn't flash the kernel you gave me but where are your sources? (the Linux kernel is GPL licensed, so it's mandatory to have a source )
Sent using Tapatalk
Never mind for now I will just extract the initrd from your kernel and use git to track the changes from the one I sent to you.
But really, you need to provide a source if you release a kernel, as per the GPL license.
Sent using Tapatalk
From which release of the Klin rom you based yours ?
If it's from the R5, did you had the font that were missing ?
Is it supercharged ?
For the kernel I'm also curious to know what are the change you have done
Dark_Balor said:
From which release of the Klin rom you based yours ?
If it's from the R5, did you had the font that were missing ?
Is it supercharged ?
For the kernel I'm also curious to know what are the change you have done
Click to expand...
Click to collapse
He based it off stock rom. Tomorrow I'll figure out how he fixed cwm 5.0.2.7 from his initramfs.
Sent using Tapatalk
klin1344 said:
Never mind for now I will just extract the initrd from your kernel and use git to track the changes from the one I sent to you.
But really, you need to provide a source if you release a kernel, as per the GPL license.
Sent using Tapatalk
Click to expand...
Click to collapse
I had the source before but my ubuntu 12.04 bugged with my old computer (nvidia problem) so I downloaded 11.04 but I forgot to do a backup.
zaclimon said:
I had the source before but my ubuntu 12.04 bugged with my old computer (nvidia problem) so I downloaded 11.04 but I forgot to do a backup.
Click to expand...
Click to collapse
If you can extract the initramfs then that's basically your source because cwm is only an initramfs change.
But again, how did you do it? Surely you remember what changes you did? It sounds like a minor tweak because you sent me your kernel a matter of hours after I sent you mine.
Btw, you know that you can downgrade ubuntu without losing data right? Ndiswrapper wasn't working on 12.04 so I put my 11.04 disc in and was able to install without losing all my personal files.
Sent using Tapatalk
klin1344 said:
If you can extract the initramfs then that's basically your source because cwm is only an initramfs change.
But again, how did you do it? Surely you remember what changes you did? It sounds like a minor tweak because you sent me your kernel a matter of hours after I sent you mine.
Btw, you know that you can downgrade ubuntu without losing data right? Ndiswrapper wasn't working on 12.04 so I put my 11.04 disc in and was able to install without losing all my personal files.
Sent using Tapatalk
Click to expand...
Click to collapse
I made some changes to the init.rc and lpm.rc I think.
Screenshots like Homescreen, App drawer, Notification place thingy, and settings.
EcHoFiiVe said:
Screenshots like Homescreen, App drawer, Notification place thingy, and settings.
Click to expand...
Click to collapse
Because it is a stock rom (with multiple apps) I won't put screenshots. Once 2.0 will be released (UI modifications) I will put them. You can backup and try it?
zaclimon said:
When you sent it to me back then it wasn't working well. So I fixed the errors on it (I did send a PM for you for testing). I do got permission from stratosk (that's why I put him in the thanks section.) I think I have the US kernel in my mediafire account. I'll upload it so both devices will have justice.
Click to expand...
Click to collapse
zaclimon said:
I made some changes to the init.rc and lpm.rc I think.
Click to expand...
Click to collapse
Ok, I just used git to check your initramfs for your INTL kernel, and lpm.rc is exactly the same as my source, and in init.rc it's also the exact same thing as my source for the CWM 5.0.2.7 beta (not on github anymore), except that you forgot a '/' in enabling bootanimation support.
So I'm confused. When I gave you my kernel, there seemed to be many errors because I was screwing with my partition filesystems, and also got a lot of "md5 mismatches" when trying to convert, so I decided to stop and work on other things. You got it working, and you claimed that you "fixed the errors in init.rc and lpm.rc" without proof with a proper source when you CHANGED NOTHING AT ALL. You probably just got lucky with CWM restoring and no md5 mismatches like I had. So you're releasing a kernel with a CWM 5 port that I completely did, and claiming that YOU fixed most of the errors and got it working when proof shows that all you did was download my source before I deleted it and simply compiled them with SteveS's one click compiling script.
And since you don't have a Github account or a source of any sort, you thought you could get away with tricking everybody that you "fixed the CWM errors", when the work was originally done by me. You changed nothing at all. It was not my intention to flame you, but seriously, I am disapointed . I'm really discouraged and very tempted to just take down all my work for the Galaxy Player and just keep all the development to myself. Maybe that's why precious devs keep leaving XDA because people just use someone else's work and package it as their own. Learn to give proper credit to other people, and if you really didn't make something, don't act or say that you did.
Ok, I'm done. Really needed to vent.
klin1344 said:
Ok, I just used git to check your initramfs for your INTL kernel, and lpm.rc is exactly the same as my source, and in init.rc it's also the exact same thing as my source for the CWM 5.0.2.7 beta (not on github anymore), except that you forgot a '/' in enabling bootanimation support.
So I'm confused. When I gave you my kernel, there seemed to be many errors because I was screwing with my partition filesystems, and also got a lot of "md5 mismatches" when trying to convert, so I decided to stop and work on other things. You got it working, and you claimed that you "fixed the errors in init.rc and lpm.rc" without proof with a proper source when you CHANGED NOTHING AT ALL. You probably just got lucky with CWM restoring and no md5 mismatches like I had. So you're releasing a kernel with a CWM 5 port that I completely did, and claiming that YOU fixed most of the errors and got it working when proof shows that all you did was download my source before I deleted it and simply compiled them with SteveS's one click compiling script.
And since you don't have a Github account or a source of any sort, you thought you could get away with tricking everybody that you "fixed the CWM errors", when the work was originally done by me. You changed nothing at all. It was not my intention to flame you, but seriously, I am disapointed . Maybe that's why precious devs keep leaving XDA because people just use someone else's work and package it as their own. Learn to give proper credit to other people, and if you really didn't make something, don't act or say that you did.
Ok, I'm done. Really needed to vent.
Click to expand...
Click to collapse
ok don't go blaming me BECAUSE IT GOT ERRORS when YOU sent it to me. I corrected some errors but I can't remember which ones is it. I can't get lucky if EVERY of my backups works(Because I got errors for md5 mismatch as well too). It is sure that your init files are the same because I used some of the text you used when you were building YOUR R1 kernel. (so basically I used some of your sources) but you were always complaining about ext4 not working so you gave up on CWMR5.0. and when I said I've fixed them you didin't tested it. DON'T GO COMPLAINING IF YOU DIDIN'T EVEN TESTED IT. (also check all the init files to be sure and also check the thanks it is `kernel related things`.) -___-
EDIT: If you want all the credits. You can have them. I should have said that you made all the changes but the problem was that you gave up on CWMR5.0 so I was like (The kernel works now but I won't release it because you already have your custom kernel with CWMR3.)

[4.1.2][CWM]Stock Samsung Rom[Deodexed][Root]

Hi All
Just finished compiling the Original Samsung 4.1.2 test firmware for CWM flashing
No changes has been made at all except Root that has been added and everything being DEODEXED
Its being uploaded atm to my Google Drive account so it should be easier to download and I will post the link as soon as its up and shared.
Please be aware of the following:
1. This is completely stock with the stock kernel that has the brick bug in it SO DON'T FORMAT EMMC AFTER YOU INSTALL IT
2. It will remove CMW and CMW needs to be installed again with Mobile odin or Odin pc.
Installation should be as per any other CWM rom:
1. Copy to SD card
2. Wipe data/factory
3. Install from the SD
4. Clear Dalvic and reboot
If you want to move away from this rom follow the following steps just to be save:
1. Use mobile odin or Odin pc to install CMW
2. Flash any other kernel like Siyah or similar
3. Do a EMMC format - ONLY AFTER STEP 2. Please dont forget to flash a non brickbug kernel 1st
4. Install other rom as desired
Download Link:
http://forum.xda-developers.com/showthread.php?t=1998205
Thanks to LegendK for eventually finding the way
Additional Installs:
Philz Kernel removing Brick bug - Flash it through recovery mode
Philz Kernel removing Brick bug - Flash through Odin
Thanks PhilZ
Additional Notes:
After installing the Rom please install one of the "Additional Installs" kernels to remove the brick bug. Once done use Rom as usual
good job
toxicdust said:
Original Samsung 4.1.2 test firmware for CWM flashing
Click to expand...
Click to collapse
Much obliged, I'm super keen to try this new version, only drama I'm a bit n00b-ish when it comes to creating a CWM-flashable ZIP from what we can grab from SamFirmwares and I'd prefer to be able to hack the apk's and Media folder before I throw it into my i9100. Looking forward to getting hold of what you've cooked up...
ADD: Oh yeh, from what I've heard, the Philz-CWM6 kernel is supposed to be the best for this F/W, check out his thread...
Code:
http://forum.xda-developers.com/showthread.php?t=1877270
looks good!!!!
Hope you can repack it with the PhilZ kernel(no eMMC brick bug) if there is time! You would save a lot of n00bs breaking their device! Just my 2 cents!
Orr.Penn.18 said:
Hope you can repack it with the PhilZ kernel(no eMMC brick bug) if there is time! You would save a lot of n00bs breaking their device! Just my 2 cents!
Click to expand...
Click to collapse
+1000
Gesendet von meinem GT-I9100 mit Tapatalk 2
how did u make the zip?
when i pulled /system and kernel it gave me a boot loop
Well done and thank you! I'm DLing when its up!
awesome!!!!!!!!!!!!!!!!!!!!!!!!!
iamnotkurtcobain said:
+1000
Click to expand...
Click to collapse
+1001
Orr.Penn.18 said:
Hope you can repack it with the PhilZ kernel(no eMMC brick bug) if there is time! You would save a lot of n00bs breaking their device! Just my 2 cents!
Click to expand...
Click to collapse
but pls upload current version for ppl who really need it in shortest time.
Its up
Will repack with the Phillz kernel as well and replace once done
toxicdust said:
Its up
Will repack with the Phillz kernel as well and replace once done
Click to expand...
Click to collapse
“You need permission to access this item.
You are signed in as *************@gmail.com, but you don't have permission to access this item. You can request access from the owner or choose a different account. Learn more”
Same problem
Give me te permission PLEASE
al*****[email protected]
permission error .!!! plz fix it
@toxicdust Can you please also upload a 180DPI dialer and TWlauncher ?
Im sure everybody would LOVE that
Thanks a lot and great job
LOL ... sorry about that. Should be open now
Ok the Philz kernel works without problems that I can see atm.
Will repack with that as well for the noob friendly version.
Others can just install his kernel from recovery mode to be on the safe side
Philz kernel available from link below, and don't forget to say Thanks...
Code:
http://forum.xda-developers.com/showpost.php?p=31310650&postcount=1
djshotty said:
Philz kernel available from link below, and don't forget to say Thanks...
Code:
http://forum.xda-developers.com/showpost.php?p=31310650&postcount=1
Click to expand...
Click to collapse
Linked the correct ones to use in the OP so that ppl don't get confused with the so many he has and by accident install the wrong one.

[KERNEL] Swap-enabled kernel for GT-I8552 [version 3]

Greetings.
For a while, I've been wondering if swap usage could benefit our device, since we usually have a lot of apps and few memory to run them. But there were no kernels with swapping enabled... until now
With this kernel, you can use swap on your device and free memory for apps which drain more resources, thus obtaining better usage experience. Also, this zip file enables your device to run init.d scripts, and it already has a script to enable swap at boot, so you don't need to worry when you restart your phone.
I tested this on my device. It boots and some of my apps ran better than before. But it is still experimental, I am testing features, toolchains, compiler flags, so be warned.
My thanks to @yajnab, because of his tutorial for compiling the kernel:
http://forum.xda-developers.com/gra...torial-compile-kernel-samsung-galaxy-t2821042
This kernel is based on his work, and the only changes are the swap support and some optimizations during compilation time.
Links for download:
v3:
http://d-h.st/65V (Dev-Host)
http://www.mediafire.com/download/57u3aa931r97u3b/kernel-with-swap-v3.zip (MediaFire)
restore-modules.zip (see next post for details):
http://d-h.st/MB3 (Dev-Host)
http://www.mediafire.com/download/tupga5ekc5xlv6r/restore-modules.zip (Dev-Host)
Change log:
v3: Compiled with Linaro 4.7.4 with compiler flags for tuning performance
v2: Test version which I didn't post
v1: Initial version.
Click to expand...
Click to collapse
Older versions:
v1:
http://d-h.st/iBP (Dev-Host)
http://www.mediafire.com/download/y4hry7mn7rgg85j/kernel-with-swap-v1.zip
Click to expand...
Click to collapse
Before flashing it, check my next post for guidelines! I won't take any responsibility for bricked devices.
Guidelines for using this kernel
What do I need to flash it?
You need to have:
A rooted phone (obvious)
CWM installed
Busybox installed (VERY important!)
A bit of courage, hehe
And about the instructions?
Very easy and painless. Just follow these steps:
Download zip file
Put it on your sd card
Reboot on CWM mode
Flash zip file
CWM will warn you that rom may flash stock recovery. You MUST answer "NO" to this question.
Reboot, and you're done.
Notes about usage of this kernel
From the 3rd version, this kernel ships their own modules. A backup is made during install, so if you want to change back to stock kernel by restoring a boot.img backup, you need also to flash the restore-modules.zip package, otherwise some things won't work after kernel change (for example, wi-fi).
Also, this kernel may drain more battery than usual.
Notes about swap usage
There are some points that YOU MUST notice before using this kernel.
Reduction of SD card life
Swap activity is disk-intensive and flash media has a limit of write cycles. So, this kernel WILL reduce your SD card life. How many time will you lose, you wonder? I don't know. But be warned.
Performance changes
Swap activity is also dependent of your SD card speed. So, if your SD card is class 4 or below, your device may get slower, so you shouldn't use this. This is for use on faster SD cards. I use on a Kingston SD card class 10, so it's fast and will provide me some performance gain. Still, this kernel might give you lags.
Use of swap files or partition files
You probably WILL need to edit the file located under the folder
Code:
system/etc/init.d
on zip package. This is because your swap device will be different from mine. I use as swap a partition on my SD card, and it is the second partition. So, the path for the device, in my case, is
Code:
/dev/block/mmcblk1p2
If you use another partition, or even a swap file, you will need to unzip the package, change the file on previously mentioned folder and zip it again before you flash it. You only need to change the part referent to device (for example, from
Code:
/dev/block/mmcblk1p2
to
Code:
/storage/sdcard0/swapfile.swp
This is just an example, your values probably will be different.
Size of swap file/partition
This will vary according to your necessities. In my daily use, my device uses up to 240MB of swap space, during some heavy gaming. So, I reccomend no more than 512MB of swap space; more than this will be probably waste of space.
That said, you may make questions, or flash this package straight.
Download Link Not Found
Error 404 !
dadash_ari said:
Download Link Not Found
Error 404 !
Click to expand...
Click to collapse
It is working for me. Anyway, I uploaded it on an alternate link.
Nice Job.Keep Devloping bro.add some SmartassH3 nd SIO nd Smartassv2 nd voltage control Will Be HelpFul
manojkumar8552 said:
Nice Job.Keep Devloping bro.add some SmartassH3 nd SIO nd Smartassv2 nd voltage control Will Be HelpFul
Click to expand...
Click to collapse
I will try to include this as soon as I have free time.
freitaz said:
I will try to include this as soon as I have free time.
Click to expand...
Click to collapse
which toolchain do u use ????
i m getti g error in toolchain so i need some batter toolchain !!
manojkumar8552 said:
which toolchain do u use ????
i m getti g error in toolchain so i need some batter toolchain !!
Click to expand...
Click to collapse
For the first version I used the toolchain from CM repo:
https://github.com/CyanogenMod/android_prebuilt/tree/cm-10.2/linux-x86/toolchain/arm-eabi-4.4.3
For the third I used Linaro 4.7.4.
freitaz said:
For the first version I used the toolchain from CM repo:
https://github.com/CyanogenMod/android_prebuilt/tree/cm-10.2/linux-x86/toolchain/arm-eabi-4.4.3
For the third I used Linaro 4.7.4.
Click to expand...
Click to collapse
Nicer Pls Provide me Linaro 4.7.4 link
I mess always i dont get Zimage Sometimes.
and dont knw how to solve problem that can u help me in that !!
www.fb.com/420manoj is my FB
manojkumar8552 said:
Nicer Pls Provide me Linaro 4.7.4 link
I mess always i dont get Zimage Sometimes.
and dont knw how to solve problem that can u help me in that !!
www.fb.com/420manoj is my FB
Click to expand...
Click to collapse
You can find Linaro pre-built there:
http://forum.xda-developers.com/showthread.php?t=2098133
About the zImage, I will be of little help at moment. Basically I am only compiling this, and nothing more else, at least for now.
freitaz said:
You can find Linaro pre-built there:
http://forum.xda-developers.com/showthread.php?t=2098133
About the zImage, I will be of little help at moment. Basically I am only compiling this, and nothing more else, at least for now.
Click to expand...
Click to collapse
i have 2 toolchain problem is with different toolchain get different problem. when add governors than no problem in output but when Add IO gots problem !! Will try thnxs.
He bro, I have all steps . But I did not understand how I will set size swap and How do I activate it 1؟
plz help
I flashed both the zips. Then rebooted the phone. But Wi-Fi is not working. Could you please tell me the solution? Can I restore my stock kernel? How can I do it? Please reply.
got a bootloop after flashing it on my cm11
Lupihaziq said:
got a bootloop after flashing it on my cm11
Click to expand...
Click to collapse
Its for stock rom based on 4.1.2
no wifi with this kernel
zooperaj said:
I flashed both the zips. Then rebooted the phone. But Wi-Fi is not working. Could you please tell me the solution? Can I restore my stock kernel? How can I do it? Please reply.
Click to expand...
Click to collapse
same problème !
link expired
does anyone here have a working link for the kernel? the ones on the post shows error
Mosh_98 said:
does anyone here have a working link for the kernel? the ones on the post shows error
Click to expand...
Click to collapse
https://mega.nz/#!5Q8nzagJ!EHSgAhnN5Vr-I-fQ0hzHAQ6um84lrZGEq5y0gbf7bsQ

[4.2.2]FeraLab_Firmware-v1.0

Hello. Recently I recieved new xperia x10 and immediately started to cook sweet droid jellybeans for it from source.
This is first RAW build based on CMX10 sources with minor fixups.
Changelog:
Code:
*** v1 ***
- Sdcard daemon tune-up (R/W buffer tweak)
- Latest CM10.1.3 sources
- Removed chromium webview
- Disabled emulator build
- OMX video recording fix
- WiFi framework fix
- AR600 wpa_supplicant fix
- HWcomposer fix
- WiFi hostapd fix
- Unbloated
- Legacy SoftAP support
- O3 optimization
- Decreased debugging in system
Download zip..extract .ftf from it and flash using flashtool. then go to cwm.. make factory reset and flash zip.
Everything have to work fine.. please test and report.
Donwload HERE (kindly, don't make mirrors)
If you like this..feed me :good:
Peace out!
buddy this is great still after so much time our X10 is alive thanks to you
mate u did the inmpossible
in that honor if this build works i will make SOKP build for u guys and i will help fera make X10 run CM12
but still i am very suprised good work mate
glad we work together....
FIRST DEVELOPING SKILL GAINED BY WATCHING FERA WORK
Did it boot?
FeraVolt said:
Wusup guys. Me again. This time with some crazy thing - CM12 for x10. I don't have device on hands so I can't even tell you if it''s booting. Don't expect that anything will work on this build. Just be happy if it boots and provide logcat anyhow. I barely compiled this thing dealing with tonns of errors..starting over again and again..so this pre-alpha's main aim is - to boot. Please test and report.
Download here
no mirrors please..
Extract & flash .ftf from zip. then flash rom (if recovery is working ) but better flash rom first using CWM 6 then flash provided ftf..just in case nothing will work. make sure you will be able to restore your x10 from hell state UB only.
This is RAW build..mostly based on Tof's work..with 3.0.8 kernel.. (Thanks bud )
Finally..hit thanks button and feed me a juicy burger if this will boot :fingers-crossed: :good:
Peace out...
Click to expand...
Click to collapse
I will test and report you ASAP
flashed kernel. but cannot go to cwm. not even cwm lights.just showing feralab logo.
Wow Fera, you have excelled yourself here! I am so going to try this!!
Just tried flashing it and it only seems to flash the kernel (Flashtool flashes it really quickly, a couple of seconds, it would be much longer if it was the entire ROM flashing) Am I doing something wrong?
alex_ncfc said:
Wow Fera, you have excelled yourself here! I am so going to try this!!
Just tried flashing it and it only seems to flash the kernel (Flashtool flashes it really quickly, a couple of seconds, it would be much longer if it was the entire ROM flashing) Am I doing something wrong?
Click to expand...
Click to collapse
ok. cm12 kernel don't have recovery access..use any kernel with cwm6 to flash rom..then pull out battery and flash cm12 kernel to boot new rom.
Tried as you mentioned several times.
Downloaded rom file just provide ROM FILE WITHOUT ANY EXTENTION. just a file. When i rename it as zip, cwm says cannot open. When i rename as RAR, cwm cannot find file. Plz provide proper ROM.ZIP file if you can
reuploaded fixed zip and updated OP.
FeraVolt said:
reuploaded fixed zip and updated OP.
Click to expand...
Click to collapse
Hi Mate
I Hope this help's
doodownunda said:
Hi Mate
I Hope this help's
Click to expand...
Click to collapse
This is lovely..thanks... while installing cm12 x10 was simply out of space on system partiton... will delete some sht from .zip and reupload it...
EDIT:
http://ul.to/p8yjsnmt another try.
FeraVolt said:
This is lovely..thanks... while installing cm12 x10 was simply out of space on system partiton... will delete some sht from .zip and reupload it...
EDIT:
http://ul.to/p8yjsnmt another try.
Click to expand...
Click to collapse
Hi again Mate i keep getting error's trying to download.
It keeps redirecting to register and pay for download?
The free download is currently not available - Please try again later! Premium account users are not affected by this temporary limitation.
Ok I tried internet explore to download and it is now downloading. So it must of been my ad-blocker on chrome stopping it? It say's it will take approx 3 hour's. I'll try to reflash when it's finished.
Thank you
Tried to install this. Installed the rom first and then flashed the kernel. It gets stuck at the bootlogo. It doesn't spin like Kernel v27 does. I couldn't get logcat to connect to my phone so nog logs sadly
~Aeny
ROM and Kernel install without problems, however as above, the boot process hangs on the FeraLab logo. (waited over 10mins)
No dmesg available at this boot stage.
@FeraVolt maybe you should place /system on sd. Maybe you should check lx cm12 sources , they did the same. just an ext4 partition on sd must be made on user's side
TakisBeskos said:
@FeraVolt maybe you should place /system on sd. Maybe you should check lx cm12 sources , they did the same. just an ext4 partition on sd must be made on user's side
Click to expand...
Click to collapse
I don't have working x10 onhands and can't do amything more that this atm. I have an idea about system partition..dont worry... :good:
FeraVolt said:
I don't have working x10 onhands and can't do amything more that this atm. I have an idea about system partition..dont worry... :good:
Click to expand...
Click to collapse
Compiled cm10.1. Please test and report.
FeraVolt said:
Hello. Recently I recieved new xperia x10 and immediately started to cook sweet droid jellybeans for it from source.
This is first RAW build based on CMX10 sources with minor fixups.
Changelog:
Code:
*** v1 ***
- Sdcard daemon tune-up (R/W buffer tweak)
- Latest CM10.1.3 sources
- Removed chromium webview
- Disabled emulator build
- OMX video recording fix
- WiFi framework fix
- AR600 wpa_supplicant fix
- HWcomposer fix
- WiFi hostapd fix
- Unbloated
- Legacy SoftAP support
- O3 optimization
- Decreased debugging in system
Download zip..extract .ftf from it and flash using flashtool. then go to cwm.. make factory reset and flash zip.
Everything have to work fine.. please test and report.
Donwload HERE (kindly, don't make mirrors)
If you like this..feed me :good:
Peace out!
Click to expand...
Click to collapse
i installed rom by using gb kernel.Then i flashed jb kernel. rom booted. but when i move home screens, its always blur. cam worked,video record worked in law quality. ram usage is 192mb without any apps.i felt very slow and not much smooth when comparing with V40 gb. i couldn't take screenchots because there was no option. however happy with booting the rom.
tsyssampath said:
i installed rom by using gb kernel.Then i flashed jb kernel. rom booted. but when i move home screens, its always blur. cam worked,video record worked in law quality. ram usage is 192mb without any apps.i felt very slow and not much smooth when comparing with V40 gb. i couldn't take screenchots because there was no option. however happy with booting the rom.
Click to expand...
Click to collapse
Tried it today, if you install gapps the blur stops.
The rom is working quite well for what I was expecting.
It is a too laggy, process "com.android.phone" FC's and the notification bar freezes, you need to restart the phone. No reboots.
Wifi, bluetooth, gps, accelerometer, camera (8Mpx, video low), are all working.
This is a great first version of what could be a great rom for our old X10...
Thank you Fera!

Categories

Resources