[Q] PC not able to detect the phone via USB - Xperia Z2 Q&A, Help & Troubleshooting

Phones not getting detected using USB
Tried with and without USB debugging
also installed PC suite to no avail

jamieloboxperiazl said:
Phones not getting detected using USB
Tried with and without USB debugging
also installed PC suite to no avail
Click to expand...
Click to collapse
Check the follows
Is Cable Connected tight?
Using right cable?(some cable is only made for charging)
Try reinstall Xperia Z2 driver from PC
Change USB port(It might be some problem with your PC)
Disconnect everything other than XperiaZ2 and try(sometimes PC can only handle few devices at the same time)
Are you using Extension cable or USB HUB? (It might not work)

Related

x10i device malfunctioned

when i connect my phone to my pc i dont get any notification on my handset and pc tells me the device is not recognized or the device has malfunctioned any ideas
i'm using w7 64, have the latest pc companion and my handset has 2.1 global.
any help greatly appreciated
chronic
edit - forgot to mention it charges fine via plug.
no ideas?
did you try to mount your sc card?
is pc companinon software still installed on your phone?
did you try to change usb port ??try to connect dirictly to mother board panel not the front usb hubs if it doesn,t work maybe the use cable you are using is corrupted one
asterix005 said:
did you try to mount your sc card?
is pc companinon software still installed on your phone?
Click to expand...
Click to collapse
How do I check this??
I have tried all usb ports and a different pc, I will try another usb cable
i've tried reinstalling pc companion on my pc, and a new usb cable... how do i check if i have pc companion software on my phone as i dont get any notification when i plug my phone in.... ?
thanks
chronic

pc not recognising phone

Hi,
I think the usb port on my sgs2 is f***** It will send a charge to the phone, but will not recognise it.
I get error on my vista laptop as :
USB DEVICE NOT RECOGNIZED - One of the usb devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
I have tried reinstalling usb drivers on kies and put in debugging mode etc. I had a problem with the phone not charging around christmas time, so I cleaned the usb port with a cocktail stick, that got the charge working, but it has not picked up usb mode since. So I cant connect usb storage or to ODIN, let alone KIES.
Does anyone have any advice/suggestions as to what I could try, I really dont want to send it back for repair and be handset less for a month!
daz_2000 said:
Hi,
I think the usb port on my sgs2 is f***** It will send a charge to the phone, but will not recognise it.
I get error on my vista laptop as :
USB DEVICE NOT RECOGNIZED - One of the usb devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
I have tried reinstalling usb drivers on kies and put in debugging mode etc. I had a problem with the phone not charging around christmas time, so I cleaned the usb port with a cocktail stick, that got the charge working, but it has not picked up usb mode since. So I cant connect usb storage or to ODIN, let alone KIES.
Does anyone have any advice/suggestions as to what I could try, I really dont want to send it back for repair and be handset less for a month!
Click to expand...
Click to collapse
I am Sure no problem with your mobile. May be problem with computer Hardware or Drivers.
can you try different USB port or you can different computer also.
If you dnt have another PC , uninstall all samsung drivers & kies and reboot the PC.
Just connect as USB storage . USB storage not require any special drivers.
Also use the original usb cable. I have two different cables and only original one works.
Sent from my GT-I9100 using XDA App
I have the same issue, if your not rooted just Send it for repair under warranty but if you are you'll have to flash a stock kernel to remove root first and use a jig to reset your flash counter
Sent from my GT-I9100 using xda premium
Had the same problem, http://forum.xda-developers.com/showthread.php?t=1425128my cable was the culprit.
Mobile Odin for flashing and Remote Web Desktop/Root explorer for SD access will tide you over.
Sent from my GT-I9100 using xda premium
Make sure:
The selection of AP/BP connection behavior
when connecting your phone (as a client), with a USB cable
to a PC host, is manually set in the PhoneUtil (PU) Menu.
This sets the behavior of your phone when connecting it
to a PC. You can select wether you like it to act as a
Modem or PDA, o via USB or UART port. The PU does not
seem available from the ServiceMode menu.
Dial: *#7284#
Code:
UART:
[o] MODEM*
[ ] PDA
USB:
[ ] MODEM
[o] PDA*
* is default SGS2 setting.

[Q] GS3 not recongnised in UL Modus from PC

I am using Android 4.3 (Buildnumber: JSS15J:I9300XXUGML29) and wanted to root it.
If I connect the phone via USB to the PC in normal modus it will be found an recognised (with and without USB debugging switched on) by the PC and the port connected to will be shown by Odin.
As soon as I go into upload mode it will not be seen by the PC (again with and without USB debugging switched on) and Odin does not show anything.
Thanks for any help in advance.
MTJ
Mind The Joker said:
I am using Android 4.3 (Buildnumber: JSS15J:I9300XXUGML29) and wanted to root it.
If I connect the phone via USB to the PC in normal modus it will be found an recognised (with and without USB debugging switched on) by the PC and the port connected to will be shown by Odin.
As soon as I go into upload mode it will not be seen by the PC (again with and without USB debugging switched on) and Odin does not show anything.
Thanks for any help in advance.
MTJ
Click to expand...
Click to collapse
- Remove installed drivers (control panel-> devices and printers)
- Reinstall Samsung drivers (or Kies3)
- Replace cable and USB port
Sent from my GT-I9300 using Tapatalk

Connecting to PC using USB problem

Hi!
I have a problem with my Lenovo K3 Note.
Can't transfer files from PC using USB cable (it only charges). Computer doesn't recognize and no notification or option to change connection type on Smartphone.
The only way to connect to PC via USB is when i have TWRP recovery open. In this case i can transfer files, etc
Already tried in different computers with different cables and with USB debug on and off.
Any help would be very appreciated

Samsung device isn't connecting via USB cable for file transferring

I am using a Samsung Galaxy J8 . My phone doesn't have any SD card. I was able to browse files of phone from my PC(ubuntu os) , even I could debug my app from android studio. But suddenly I am not able to do so. When I connect my phone via USB to my PC , it is only charging . What I did so far is following.
1. Enable developer option and usb debugging , changed default usb configuration to file transfer and image transfer and MIDI .
2. Restarted my phone.
3. Restarted my PC .
4. Change of USB cable and port .
5. At last factory reset .
After trying all above things , still I can't connect to phone via usb cable .
I think my pc , usb cable , usb port are working fine . Because when I connected another device , it works fine
sshuvro58 said:
I am using a Samsung Galaxy J8 . My phone doesn't have any SD card. I was able to browse files of phone from my PC(ubuntu os) , even I could debug my app from android studio. But suddenly I am not able to do so. When I connect my phone via USB to my PC , it is only charging . What I did so far is following.
1. Enable developer option and usb debugging , changed default usb configuration to file transfer and image transfer and MIDI .
2. Restarted my phone.
3. Restarted my PC .
4. Change of USB cable and port .
5. At last factory reset .
After trying all above things , still I can't connect to phone via usb cable .
I think my pc , usb cable , usb port are working fine . Because when I connected another device , it works fine
Click to expand...
Click to collapse
Try connecting your phone to another PC/Laptop etc also change cables, if it works then it is the USB port on your PC having issues with the drivers uninstall the drivers from the system menu and reboot your PC. Important to note here is that doing so will also disable your mouse and keyboard so just tap the power key on your PC and it will shutdown.
HisEvilness said:
Try connecting your phone to another PC/Laptop etc also change cables, if it works then it is the USB port on your PC having issues with the drivers uninstall the drivers from the system menu and reboot your PC. Important to note here is that doing so will also disable your mouse and keyboard so just tap the power key on your PC and it will shutdown.
Click to expand...
Click to collapse
I tried that too, I tried in another PC , it didn't work
sshuvro58 said:
I tried that too, I tried in another PC , it didn't work
Click to expand...
Click to collapse
Since the USB port is working it must be the USB cable/connectors see if you can replace it or test it with another cable, if the cable isn't the problem your USB port on the phone might be partially busted since it will allow for charging not data transfer. Something on the side, on my PC I need to unlock the screen to access my phone drive and SD card did you check for that?
HisEvilness said:
Since the USB port is working it must be the USB cable/connectors see if you can replace it or test it with another cable, if the cable isn't the problem your USB port on the phone might be partially busted since it will allow for charging not data transfer. Something on the side, on my PC I need to unlock the screen to access my phone drive and SD card did you check for that?
Click to expand...
Click to collapse
Yes I checked .
I am just wondering now, does it have anything to do with knox ?
sshuvro58 said:
Yes I checked .
I am just wondering now, does it have anything to do with knox ?
Click to expand...
Click to collapse
Knox should not interfere with your USB connection.

Categories

Resources