Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Built from CM-11.0 sources with Mirage kernel
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
To take a screen shot, just slide left.
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut.
Download links
Last version can be found here:
Basketbuild.com
GOO.IM
Install instructions:
1.With fastboot:
Code:
fasboot flash recovery philz_touch_*.*.*_shooteru.img
2.With Rashr - Flash Tool:
Get Rashr - Flash Tool from play store : HERE
Download recovery image to sdcard, and flash it with the above app.
Known Issues:
Charging led not working
Off-mode charging is working ! (phone will boot to recovery and charge)
Should work on all HBOOTs
S-OFF REQUIRED !
XDA:DevDB Information
[RECOVERY] [SHOOTER] PhilZ Touch - 6.46.1 - Selinux support - 3.0 KERNEL, Tool/Utility for the HTC EVO 3D
Contributors
johnnyslt
Version Information
Status: Testing
Created 2014-06-30
Last Updated 2014-06-30
I made a recovery-flashable zip if you'd like it.
Thanks for the alternate recovery.
bigsupersquid said:
I made a recovery-flashable zip if you'd like it.
Thanks for the alternate recovery.
Click to expand...
Click to collapse
Sure! Give me the link and I'll add it to the OP.
md5sum 7d53b4453f1dbf975c334fefc4b103d3
//edit: this is now outdated, I would suggest using the newest from the OP.
i have been testing for a few days haven't had any problems as of yet besides when i first boot to recovery it just has a black screen for 5-10 sec before it comes up almost thought something was wrong. i use a 32g ultra sd card so it usually takes awhile to scan all the files since it is always full.
There's an update for Philz I don't know if its for all device tho also there seems to be a problem flashing virus venom aroma zips I will try and post a screenshot ..
This is what I get everytime I try and flash
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my PG86100 using Tapatalk 2
rrjskj said:
There's an update for Philz I don't know if its for all device tho also there seems to be a problem flashing virus venom aroma zips I will try and post a screenshot ..
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
That update if manly for f2fs additions.
I've build it anyway, because sd-ext wasn't working, so that's fixed now.
Recovery logs are located in /tmp
rrjskj said:
There's an update for Philz I don't know if its for all device tho also there seems to be a problem flashing virus venom aroma zips I will try and post a screenshot ..
This is what I get everytime I try and flash
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
Can you please try the attached one ?
johnnyslt said:
Can you please try the attached one ?
Click to expand...
Click to collapse
I'm on it ..
It's still a no go same message. I'm wondering if it the Rom because I can flash flashalot's recovery switcher with no problems but not this one
Sent from my PG86100 using Tapatalk 2
There's another update for philz by the way ..
Sent from my PG86100 using Tapatalk 2
rrjskj said:
There's an update for Philz I don't know if its for all device tho also there seems to be a problem flashing virus venom aroma zips I will try and post a screenshot ..
This is what I get everytime I try and flash
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
The flash is failing because it says you don't have a shooter or shooteru if your absolutely sure you do you can modify the updater script located in the aroma zip under Meta-inf/com/Google/android/updater-script just remove those first lines that look like your error to not check for the device name. Not all ROMs have that some check for boot loader versions others don't check anything at all just be careful once modified it can be flashed to any device and possibly brick it by flashing the wrong partitions. There could be something weird going on with the recovery if it works with other recoveries.
HideTheCookies said:
The flash is failing because it says you don't have a shooter or shooteru if your absolutely sure you do you can modify the updater script located in the aroma zip under Meta-inf/com/Google/android/updater-script just remove those first lines that look like your error to not check for the device name. Not all ROMs have that some check for boot loader versions others don't check anything at all just be careful once modified it can be flashed to any device and possibly brick it by flashing the wrong partitions. There could be something weird going on with the recovery if it works with other recoveries.
Click to expand...
Click to collapse
Yeah it don't work. Removing them few lines results in it not flashing period . thanks anyways ..
Sent from my PG86100 using Tapatalk 2
What a great recovery I use it on my note 2 and like it better than any recovery. Plus it will read and backup in both twrp and cwm styles.
Sent from my SPH-L900 using XDA Premium 4 mobile app
<*shameless plug*>
[TOOL]Flashable recovery zip template
to avoid fastboot or an app or adb in recovery.
//edit: it seems possibly inappropriate to post it here but I thought since the original flashable zip was accepted it'd be ok. I'll remove this from here if requested.
This seems to be working good so far but I get this bad boot error every time I boot into recovery.
You can see the error in the log on the screenshot.
I love this recovery btw.
Thanks for porting it for us.
linsalata28 said:
This seems to be working good so far but I get this bad boot error every time I boot into recovery.
You can see the error in the log on the screenshot.
I love this recovery btw.
Thanks for porting it for us.
View attachment 2790015
Click to expand...
Click to collapse
Can you get me the recovery.log from /tmp ?
I need to see the whole error message.
johnnyslt said:
Can you get me the recovery.log from /tmp ?
I need to see the whole error message.
Click to expand...
Click to collapse
I got this from cache/recovery/last_log
Not sure where to find tmp. I've seen it before but for some reason I can't for the life of me find those logs.
Here is a link to that log last_log I think it says the same thing but if you can give me the path to tmp I'll post that also.
Thanks again.
linsalata28 said:
I got this from cache/recovery/last_log
Not sure where to find tmp. I've seen it before but for some reason I can't for the life of me find those logs.
Here is a link to that log last_log I think it says the same thing but if you can give me the path to tmp I'll post that also.
Thanks again.
Click to expand...
Click to collapse
That log has what I need.
I think I know what the problem is, and I'll try to fix it.
Is there a way to fix permissions from within this recovery? If so I can't figure out how.
If not does anyone have a flashable script that will only fix permissions?
TIA
linsalata28 said:
Is there a way to fix permissions from within this recovery? If so I can't figure out how.
If not does anyone have a flashable script that will only fix permissions?
TIA
Click to expand...
Click to collapse
that function has been removed from newer versions of CWM this post has what your looking for http://forum.xda-developers.com/showthread.php?t=2398339
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi everyone, I wrote this simple little program to help with flashing kernels on S-ON HTC devices. The program is pretty simple and contains all of the needed files to flash your boot.img and push the necessary kernel modules, either while the phone is booted into Android or if you are stuck in a bootloop and can only get into the bootloader. The program is configured to flash a near-stock boot.img from the 2.13 base (only added init.d support) and the kernel modules for the kernel. In theory, you can replace the boot.img and modules from other kernels and flash through this program as well (more info in 3rd post)
Click to expand...
Click to collapse
Download:
v1.2.1 - For JB ONLY! https://dl.dropbox.com/u/6621763/boot-img-flasher-v1.2.1-jb.zip
v1.2.1 - For ICS ONLY! http://bit.ly/OGAGgn
Click to expand...
Click to collapse
Credits:
Morto_jeffrey for some code from Venom Flasher
patensas for the icon
Click to expand...
Click to collapse
Changelog
v1.2.1 JB RELEASE- 12.18.12
Updated boot.img and kernel modules from 3.15.651.6 RUU
v1.2.1 - 10.5.12
Fix default debug mode
Fix first time run procedure
Open log.txt on exit if debug enable
v1.2 - 10.4.12
Fixed version number not showing in program or log
Download - http://bit.ly/SzWucs
v1.1 - 10.2.12
Fix code when pushing files
Added logging to diagnose issues
Don't automatically detect when in fastboot, wait for user input
Download - http://bit.ly/T0d5T1
v1 - 10.2.12
Initial Release
Download - http://bit.ly/QooZHR
Click to expand...
Click to collapse
Info
How it works:
This program flashes whatever boot.img is placed in the "files" folder and moves whatever modules are in the "files\modules" to /system/lib/modules on your phone.
Click to expand...
Click to collapse
How to use:
Use the main menu to flash your boot.img to your phone. For most people, this will be the option they need to use. If you cannot boot (bootloop) then you need to get into the bootloader by pressing and holding power and volume down. This may take 10-15 seconds and you may see the bottom LEDs flashing in the process. In this case, please use the advanced menu to flash the boot.img (this way removes the adb steps to automatically boot into recovery, since you can't use adb if you're in a bootloop)
Click to expand...
Click to collapse
Flashing a different kernel than what is included with the program:
If you want to use this program to flash a different kernel than the stock 2.13.651.1 kernel, place the custom kernel boot.img in the "files" folder and also take the new modules for the kernel you want to flash, delete all the files in the "modules" folder, and put the new modules into the "modules" folder.
Click to expand...
Click to collapse
I'll test it out and report back.
---------- Post added at 04:36 PM ---------- Previous post was at 04:14 PM ----------
Usage instructions:
Open the zip file and extract the boot-img-flasher.exe and the files directory somewhere on your computer.
Boot your phone into bootloader/fastboot.
In the 'files' directory (example: C:\Flasher\Files) put the boot.img from your selected kernel.
In the modules directory (C:\Flasher\Files) put whatever modules come with your kernel.
Run boot-img-flasher.exe
Select option 1 (if flashing the stock kernel it comes with). Phone will reboot into bootloader and flash the kernel. Follow the directions.
Viper needs to make a few changes so it's not quite ready for prime time yet, but it should work. I'd wait for the next version, but if you're impatient, light it up and give it a shot
smw6180 said:
I'll test it out and report back.
---------- Post added at 04:36 PM ---------- Previous post was at 04:14 PM ----------
Usage instructions:
Open the zip file and extract the boot-img-flasher.exe and the files directory somewhere on your computer.
Boot your phone into bootloader/fastboot.
In the 'files' directory (example: C:\Flasher\Files) put the boot.img from your selected kernel.
In the modules directory (C:\Flasher\Files) put whatever modules come with your kernel.
Run boot-img-flasher.exe
Select option 1 (if flashing the stock kernel it comes with). Phone will reboot into bootloader and flash the kernel. Follow the directions.
Viper needs to make a few changes so it's not quite ready for prime time yet, but it should work. I'd wait for the next version, but if you're impatient, light it up and give it a shot
Click to expand...
Click to collapse
Thanks Steve, as always.
If you need to use this right away, boot into bootloader the go into the advanced menu and flash from there. You may see an Adb error when its rebooting, I will fix all this in about an hour or so.
Sent from my EVO using Tapatalk 2
-viperboy- said:
Thanks Steve, as always.
If you need to use this right away, boot into bootloader the go into the advanced menu and flash from there. You may see an Adb error when its rebooting, I will fix all this in about an hour or so.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
No sweat. It's what I do.
Always at it viper :thumbup:
When I saw thread title, I thought it was gonna be something that could be done from the phone, but I guess that's what flashIMGGUI is for, or am I wrong?
from my flying AOKP'd Evo LTE and xda premium
scottspa74 said:
Always at it viper :thumbup:
When I saw thread title, I thought it was gonna be something that could be done from the phone, but I guess that's what flashIMGGUI is for, or am I wrong?
from my flying AOKP'd Evo LTE and xda premium
Click to expand...
Click to collapse
Yeah, this will be from the computer Would be hard to have an app run on your phone that is bootlooping, now wouldn't it? :silly: Almost done with v1.1. Actually, it is done - someone is just whipping me up a kick ass icon
This is pretty cool. Thanks for the tool.
via eVo.
Blackcircle said:
This is pretty cool. Thanks for the tool.
via eVo.
Click to expand...
Click to collapse
Wait for the next one.
New version is up, works flawless. I DARE you to try an break it :silly: Still need to update the first few posts when I get back from the gym.
Enjoy!
-viperboy- said:
New version is up, works flawless. I DARE you to try an break it :silly: Still need to update the first few posts when I get back from the gym.
Enjoy!
Click to expand...
Click to collapse
Don't ever dare me to break something.
Could I please have some feedback on this program?
Sent from my EVO using Tapatalk 2
-viperboy- said:
Could I please have some feedback on this program?
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
It works. Happy?
smw6180 said:
It works. Happy?
Click to expand...
Click to collapse
Fuuuuuuuuuu
Sent from my EVO using Tapatalk 2
-viperboy- said:
Fuuuuuuuuuu
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
lol
Nice good lookin out
This program saved my life yesterday. Thank you viper, thank you for your hard work.
Is it ok if we post this in other threads to help each other out of trouble?
bigdaddy619 said:
Is it ok if we post this in other threads to help each other out of trouble?
Click to expand...
Click to collapse
Of course
Sent from my EVO using Tapatalk 2
Team Win Recovery Project 2.8, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It’s a fully touch driven user interface – no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
***WHAT WORKS***
EVERYTHING and it's been made OFFICIAL
MAKE SURE YOU GET THE CORRECT VERSION'S I WILL NOT BE TO BLAME IF YOU FLASH THE WRONG ONE
READ THIS IF YOU FLASH THE RECOVERY AND THEN ASK ME QUESTIONS I WILL POINT YOU TO THIS THREAD OR EVEN IGNORE YOU
READ REGARDING ADB IN RECOVERY
TWRP IRC CHANNEL
DOWNLOAD
DOWNLOAD ---- MY BUILD
Thanks to
The TWRP GUYS
and football for his ruu's so i can get the img's i need
and milestoner for confirming it works
Mr anon
and all the following people
orb3000
morphly
hasoon2000
hasan_abeer
vogi
chrigel2000
AndroHero
ectodroid
[email protected]
Anon #1
Ixz
bboerny
Anon #2
Anon #3
sellers86
Wik
Anon #4
simonsimons34
caedanne
flipside101
morphly
bboerny
TWRP WEBSITE
**INSTRUCTIONS**
Download the file
then either use HASOON'S toolkit
or
Manual method
reboot into bootloader
fastboot flash recovery TWRPrecovery.img
SIDELOAD INSTRUCTIONS
MarylandCookie said:
I had the same issue and fixed it via adb sideload.
I have uploaded the latest binaries to my dev host account.
1. Download and extract these to a directory and copy the rom over into the same directory.
2. Boot up your phone into twrp recovery.
3. Select advanced and adbsideload (Your phone will be waiting for the file transfer.)
4. Open command prompt in the above directory you created with the binaries and rom.
5. Issue command "adb devices" (You should get the serial number with sideload next to it)
6. Finally issue command "adb sideload rom.zip" (rom.zip will be the name of your rom)
This will start sending your rom to the handset and will automatically install.
Hope the above helps
Link to Binaries:
ADB Binaries
Click to expand...
Click to collapse
Code:
CHANGELOG
19/11/12
Last unofficial build (all builds forward are official direct from TWRP)
AT&T added
data/media sorted
-----------------------------------
Build 1 16/11/12
1st build
LET ME KNOW OF ANY PROBLEMS
any feedback on this guys?
Wow. I didnt even see this. I couldve added it to my toolkit lol. ill wait til people say if it works and then ill add. Thanks Lloir!
if it work's i'll talk to dees_troy about making it official
So it's still untested? I would like to install it but I'm afraid it will brick my phone somehow..
Edit: Flashed it but I can't seem to browse through the sdcard, just the internal system (/sdcard vs /sdcard1) where the app/system etc. is located.
thecompany said:
So it's still untested? I would like to install it but I'm afraid it will brick my phone somehow..
Edit: Flashed it but I can't seem to browse through the sdcard, just the internal system (/sdcard vs /sdcard1) where the app/system etc. is located.
Click to expand...
Click to collapse
meh thanks dude, i'll look into this more when i get the HOX+
locking thread for now
Got a report that this is working fine, the sdcard is under /sdcard/media so it works perfect!
thanks milestoner for pointing this out!
Does this work with At&t HTC one X+?
Sent from my HTC One X+ using xda premium
samomamo said:
Does this work with At&t HTC one X+?
Sent from my HTC One X+ using xda premium
Click to expand...
Click to collapse
Now it does
Sent from my One V using Tapatalk 2
Just a few comments:
- can't mount SD Card in Recovery (or at least can't access to it)
- backup/nandroid is saved in (SDCard - DATA) / TWP
and not in (SDCard - DATA)/media, so can't access to the back-up
Steve0007 said:
Just a few comments:
- can't mount SD Card in Recovery (or at least can't access to it)
- backup/nandroid is saved in (SDCard - DATA) / TWP
and not in (SDCard - DATA)/media, so can't access to the back-up
Click to expand...
Click to collapse
cant access it from TWRP? or? i cant test sdcard mount as linux is being a *****, but it looks like it mounts fine, i have a nandroid and i can see it to restore......
*edit*
nevermind see what you mean, i'll sort it for the next build
I can confirm that mount points are borked at the moment. While in recovery the sdcard can be found in /sdcard/media. Backing up seem to work ok but backups are insanely huge (6.6GB for a compressed backup!). This is probably because everything including the whole sdcard is backed up. While TWRP itself finds the backups just fine, when android is running they are located in /data/TWRP. I haven't tried to restore a backup yet.
I'm a little bit worried about what will happen later if I try to restore one of my backups that are made with the current TWRP version. Will the fixed version recognize and correct the mixed up mount points of the current version? If not, I can forget about all of my current backups .
---------- Post added at 01:18 PM ---------- Previous post was at 01:10 PM ----------
Just two more minor details: Time and battery values displayed at the top of TWRP are wrong. The battery stays put at 66% and time is shifted by a couple of hours.
Thanks again for your work!
milestoner said:
I can confirm that mount points are borked at the moment. While in recovery the sdcard can be found in /sdcard/media. Backing up seem to work ok but backups are insanely huge (6.6GB for a compressed backup!). This is probably because everything including the whole sdcard is backed up. While TWRP itself finds the backups just fine, when android is running they are located in /data/TWRP. I haven't tried to restore a backup yet.
I'm a little bit worried about what will happen later if I try to restore one of my backups that are made with the current TWRP version. Will the fixed version recognize and correct the mixed up mount points of the current version? If not, I can forget about all of my current backups .
---------- Post added at 01:18 PM ---------- Previous post was at 01:10 PM ----------
Just two more minor details: Time and battery values displayed at the top of TWRP are wrong. The battery stays put at 66% and time is shifted by a couple of hours.
Thanks again for your work!
Click to expand...
Click to collapse
yea the battery thing is a pain, time you can set yourself...the fstab is fine, it's other settings i need to sort out, just working on the AT&T one and then i'll sort this one out
@LIoir
you wont belive it but HTC ONE X+ source code for Kernel is out (sorry for writing it here), so i can start to look into it !
I will try to push the source to github tonight, so you can also have a look into it and if you still wont to, we can work together on it
Op updated!
Lloir said:
Op updated!
Click to expand...
Click to collapse
ATT FTW!!!! Unfortunately the link is dead. Thank you for your wonderful efforts none the less
sparkplug619 said:
ATT FTW!!!! Unfortunately the link is dead. Thank you for your wonderful efforts none the less
Click to expand...
Click to collapse
woops was a typo
http://cyano-rob.tuennerhoff-edv.de/RECOVERY/TWRP/evitareu/recovery.img
there's the link also link is fixed in the OP
Lloir said:
woops was a typo
http://cyano-rob.tuennerhoff-edv.de/RECOVERY/TWRP/evitareu/recovery.img
there's the link also link is fixed in the OP
Click to expand...
Click to collapse
If this works, can an AT&T user make a nandroid and upload the boot.img and system?
Nexus 5 Multi-Tool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
me and kwongger are putting together a new tool, its one of the first that supports windows/linux/mac AND ANDROID! thats right, the tool can be used on your device!
FEATURES
Unlock bootloader
Install CWM
Install TWRP
Add root permissions
Add build.prop tweaks
Backup device
Flash a custom recovery
Flash a custom kernel
Revert device to stock out-of-box state
Pull device information
Install drivers
Find custom kernels, recoveries and roms
Click to expand...
Click to collapse
Due to my cousin having this device(not me) i would appreciate someone to help me with testing new features?
DOWNLOAD LINK
INSTRUCTIONS ARE SIMPLE
All activities take place with the device on and you will endup back with the device on.
Download
Extract
Run Tool.exe as administrator
Install device drivers(included)
Click to expand...
Click to collapse
FAQ
Q. After trying to revert to stock state(out of the box) my device is stuck in a bootloop?
A. Boot into recovery, wipe data/factory reset. Your prayers have beey answered
Q. After the tool flashes recovery, it doesnt seem to stick. why?
A. This is not an error with the tool or recovery, its just.. a nexus thing...
Flash it a few more times and eventually it will stick!
Q. Why is the file only 1.5 MB?
A. All files are stored on server and pulled only when needed with a utility
Q. Will the tool download all the files everytime i wanna perform an option?
A. No. it downloads the file once and detects that its already there the second time.
Q. Is this tool worth my time?
A. Who would think a 10 minute toolkit could hit the portal?
Q. Are the drivers included?
A. Yes but no. the application downloads the drivers only if you want to install them via my tool
Q. Who's yo daddy?
A. Idk, son.
Click to expand...
Click to collapse
CHANGELOG
3.0
Added CWM
Updated TWRP
Added "Where to find custom..." in flash options
2.4
Fixed menu error
Changed file type to executable
Added logo
Added root options menu
Changed root method
All processes are now verbal
No wait-for-device command
2.0
All files stored on server
Cut the tool size down to 1.5 MB
Added restore to stock state
Added install drivers+guide
Added get device info
Fixed minor error
1.0
Initial release
Click to expand...
Click to collapse
Credits
Chainfire
PlayfulGod
Cwm
Twrp
Click to expand...
Click to collapse
NOTE: what you do with this tool is your responsibility, use it at you own risk.
Hello,
Good work!
Published on HTCMania :good:
http://www.htcmania.com/showthread.php?t=711894
David_Vaz said:
Hello,
Good work!
Published on HTCMania :good:
http://www.htcmania.com/showthread.php?t=711894
Click to expand...
Click to collapse
Thanks
You show it as note 3 multi tool, need to change that
jd1639 said:
You show it as note 3 multi tool, need to change that
Click to expand...
Click to collapse
whopps will fix that now
Used the tool - now phone will not restart. It is stuck on the four colours that move about. Has been stuck on this now for about 5 minutes.
Any suggestions? I am able to get into twrp recovery no problems.
Ian
irhut said:
Used the tool - now phone will not restart. It is stuck on the four colours that move about. Has been stuck on this now for about 5 minutes.
Any suggestions? I am able to get into twrp recovery no problems.
Ian
Click to expand...
Click to collapse
You will have to Restore your phone.
My kit will have recovery functions monday.
http://forum.xda-developers.com/showthread.php?t=2508817
irhut said:
Used the tool - now phone will not restart. It is stuck on the four colours that move about. Has been stuck on this now for about 5 minutes.
Any suggestions? I am able to get into twrp recovery no problems.
Ild.pro
Ian
Click to expand...
Click to collapse
what function did you use?
Kwongger said:
You will have to Restore your phone.
My kit will have recovery functions monday.
http://forum.xda-developers.com/showthread.php?t=2508817
Click to expand...
Click to collapse
Also no he doesnt, the only thing that could cause this is the build.prop tweaks, whitch can be reverted by pushing the backup back to /system/ Aldo mine will Also include restore options soon
What tweaks are in this?
Sent from my Nexus 4 using Tapatalk
crackmulah said:
What tweaks are in this?
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Battery saving deepsleep quickbook scrolling enhancement better touch responde better jpeg quality better picture quality better internet and connection speed, googles sms Server and overall smootheness
Does this tool install the official TWRP release for the N5?
ricky310711 said:
Battery saving deepsleep quickbook scrolling enhancement better touch responde better jpeg quality better picture quality better internet and connection speed, googles sms Server and overall smootheness
Click to expand...
Click to collapse
That's quite something to say, better all these things for a new device and software.
Sent from my Nexus 4 using xda app-developers app
Synyster06Gates said:
Does this tool install the official TWRP release for the N5?
Click to expand...
Click to collapse
Yes!
also people reading the article on the portal, the tool does not use fast flash commands, it uses the dd method for those flashes, when i add kernel flashing and backing up your device as .img files then i will be adding fastboot flash commands, so yes, the flashes occur when your device is booted!
Can I ask what version of TWRP is installed, is it the latest?
ItzMar said:
Can I ask what version of TWRP is installed, is it the latest?
Click to expand...
Click to collapse
there is only one version of TWRP compiled for the N5 and yes its the latest! update coming soon!
Ok thanks man. Can I also ask where to find the device drivers?
ItzMar said:
Ok thanks man. Can I also ask where to find the device drivers?
Click to expand...
Click to collapse
i am almost finished updating the tool i will include it in the next update!! but you could more then likely find them in the general section!
ok cheers, no problem. Will wait for the new version to be up, no rush. Thanks for your commitment to provide a tool for us noobs/lazy people!
Would you recommend running your tool before first boot?
Just a few questions: when there is <waiting for device> for 5 minutes, that seems like my drivers are wrong? It was possible to unlock, but not to install a recovery, so i am trying to update my drivers...
And can i run the tool and select unlock, install recovery and root even when my device is already unlocked?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I DID NOT MAKE THIS ROM! I just compiled it from the beanstalk and CM sources
-Data is having trouble keeping a connection after some time (present in 275. build 270 still ok)
-ALL CM bugs will be present. This build uses the CM jewel device tree and kernel.
http://forum.xda-developers.com/showthread.php?t=2397942
http://d-h.st/bTn
BeanStalk Build 4.4.249_OLD_FORMAT
http://d-h.st/bTn
-Updated CM/Beanstalk sources to 2/18/14.
THE FOLLOWING BUILD IS FOR THOSE WHO UPGRADED TO THE NEW HBOOT 2.10 SENSE 5 ROM...IF YOU ARE ON HBOOT 2.09 THIS IS NOT THE BUILD FOR YOU!!!
YOU MUST PERFORM THE ENTIRE UPGRADE PROCESS INCLUDING BOOTING THE ROM HERE
Captain_Throwback said:
DISCLAIMERS:
Instructions for installation:
Download firmware file, and install via HBOOT or fastboot. This will update your HBOOT (2.10) your radio (1.13.11.1105), and some other important firmware bits. Make sure you remove or rename any PJ75IMG files from your external SD card after this step.
Download recovery file (TWRP 2.6.3.1b) and flash via fastboot. This version of TWRP has been modified to accommodate the updated partition layout for this update.
Download ROM (either version), and flash via TWRP. If the TWRP gives an error and reboots, hold the volume down button to get back to the bootloader, boot back into recovery, and flash again. It *should* flash fine on the second attempt.
Click to expand...
Click to collapse
Once you have booted into the Sense 5 rom successfuly you may proceed in flashing the NEW_FORMAT version of this rom after a full wipe in the new recovery.
BeanStalk Build 4.4.285_NEW_FORMAT
http://d-h.st/gtg
-updated sources to 4.4.285 from beanstalk
BeanStalk Build 4.4.270_NEW_FORMAT
http://d-h.st/9sI
-updated sources to 4.4.270 from beanstalk
1. Download the latest build
2. Download the latest Slim GAPPS or other 4.4 specific gapps
3. In recovery, full wipe, and manually format /system
4. Flash ROM and the gapps you want, reboot
SlimROM source can be found HERE
BeanStalk source can be found HERE
CM sources HERE
For Changelog/Features
http://www.scotthartbti.com/index.php/beanstalkbuilds/
Thanks:
deck's tireless work made the CM kernel and device tree that this and many other roms for this device are based on.
scotthartbti for posting creation, updates, and keeping github up to date.
insaneo1488, tearaz, Haus_, shortyishere, NaterTots, CaptainThrowback, and everyone in the #htc-dev channel for all of their support and info along the way.
Please dont hesitate to let me know if someone was missed here, send a PM or catch me in freenode and ill get you in there
Reserved
Reserved
First... and you've been pretty busy lately GoblinZ ... get some sleep. :laugh:
Awesome... Downloading now Thanks!!!!
This is very nice.
Thanks a ton!
Holy shiiiiiii! Beanstalk is back! You rock man!
Dirty Dirty EVO
Figured out xposed location.... but can't get DPI to change.
Also, for Pie control, not seeing how to change background on lock screen.
Nice work man thank you for bring us such a lovely Rom. I hope you have as much fun as I did building and maintaining this Rom. :thumbup:
Sent from my EVO using Tapatalk
mcwups1 said:
Figured out xposed location.... but can't get DPI to change.
Also, for Pie control, not seeing how to change background on lock screen.
Click to expand...
Click to collapse
So I pulled the feature list directly from the lead developer's thread with the assumption that he had kept up the feature list...appears he doesnt keep his thread up.
http://forum.xda-developers.com/showthread.php?t=2091900
So I will edit out all the features from the OP and instead just put a link to the kitkat changelog.
Copy that, but I don't see why DPI settings aren't working. Xposed is there, as well as app settings, so it should work.
I installed and enabled, then rebooted.
I'll keep trying.
mcwups1 said:
Copy that, but I don't see why DPI settings aren't working. Xposed is there, as well as app settings, so it should work.
I installed and enabled, then rebooted.
I'll keep trying.
Click to expand...
Click to collapse
open xposed back up on the top where it says "Framework" change to "Modules" put a check in the app settings module...reboot
GoblinZ said:
open xposed back up on the top where it says "Framework" change to "Modules" put a check in the app settings module...reboot
Click to expand...
Click to collapse
I did that. I've used Xposed in almost every ROM I've installed. I'm familiar with it.
Attached pictures, and I've granted SU permissions and rebooted twice.
mcwups1 said:
I did that. I've used Xposed in almost every ROM I've installed. I'm familiar with it.
Attached pictures, and I've granted SU permissions and rebooted twice.
Click to expand...
Click to collapse
I did not test dpi, I set an app to "landscape only" and that worked after enabling in the modules.
Message app is awesome!
Sent from my EVO using Tapatalk
Anyone get DPI settings to work?
So right after I say message app is awesome it's force closing when I attach and try to send a picture. Any ideas
Sent from my EVO using Tapatalk
thewind730 said:
So right after I say message app is awesome it's force closing when I attach and try to send a picture. Any ideas
Sent from my EVO using Tapatalk
Click to expand...
Click to collapse
I flashed the Full Modular GAPPS from the 0-day PA so my messaging app didnt look any different. I was able to attach a picture and send without issue.
Edit: so, I wiped flashed Just this rom and the PA Gapps, and sure enough force close...google is clearly forcing us to use hangouts...but in all seriousness it seems to be affecting CM nightly as well
http://forum.xda-developers.com/showpost.php?p=50141180&postcount=1184
So, I will recompile and post to OP as soon as CM has the code cleaned up with a fresh build. Sorry for the trouble.
Ok cool cause I was having the same issues with decks irc build with the messaging app ill try this out once you get it fixed
Sent from my EVO using XDA Premium 4 mobile app
GoblinZ said:
I flashed the Full Modular GAPPS from the 0-day PA so my messaging app didnt look any different. I was able to attach a picture and send without issue.
Edit: so, I wiped flashed Just this rom and the PA Gapps, and sure enough force close...google is clearly forcing us to use hangouts...but in all seriousness it seems to be affecting CM nightly as well
http://forum.xda-developers.com/showpost.php?p=50141180&postcount=1184
So, I will recompile and post to OP as soon as CM has the code cleaned up with a fresh build. Sorry for the trouble.
Click to expand...
Click to collapse
Thanks man! For looking into this and bringing these builds back your time is greatly appreciated
Sent from my EVO using Tapatalk
TLDR:
MAKE A BACKUP. Seriously.
Downloads in second post. Flash recovery, then kernel, then MultiROM.
A kernel with the kexec-hardboot patch doesn't exist as of now. It is being worked upon be me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
This is a port of Tassadar's MultiROM, a multi-boot mod for OnePlus 2. The main part of MultiROM is a boot manager, which appears every time your device starts and lets you choose ROM to boot. You can see how it looks on the left image below and in gallery. ROMs are installed and managed via modified TWRP recovery. You can use standard ZIP files to install secondary Android ROMs and MultiROM even has its own installer system, which can be used to ship other Linux-based systems.
This is still very experimental!
Features:
Multiboot any number of Android ROMs
Restore nandroid backup as secondary ROM
Warning!
It _is_ dangerous. This whole thing is basically one giant hack - none of these systems are made with multibooting in mind. It is no longer messing with data partition or boot sector, but it is possible that something goes wrong and you will have to flash factory images again. Make backups. Always.
Installation
Firstly, there are videos on youtube. If you want, just search for "MultiROM installation" on youtube and watch those, big thanks to all who made them. There is also an awesome article on Linux Journal.
MultiROM has 3 parts you need to install:
Modified recovery (TWRP_multirom_oneplus2_YYYYMMDD.img) - download the IMG file from second post and use fastboot/recovery to flash it.
Patched kernel - You can use either one of the stock ones in second post or third-party kernels which include the patch.
Download the ZIP file and flash it in recovery.
MultiROM (multirom-YYYYMMDD-vXX-oneplus2.zip) - download the ZIP file from second post and flash it in recovery.
Note: Your current ROM will not be erased by the installation.
Download links are in the second post.
Adding ROMs
1. Android
Go to recovery, select MultiROM -> Add ROM. Select the ROM's zip file and confirm.
Updating ROMs
1. Primary ROM/Internal
Flash ROM's ZIP file as usual, do factory reset if needed (it won't erase secondary ROMs)
Go to MultiROM in recovery and do Inject current boot sector.
2. Secondary Android ROMs
If you want to change the ROM, delete it and add new one. To update ROM, follow these steps:
Go to MultiROM and select the ROM you want to update.
Select "Flash ZIP" and flash ROM's ZIP file.
Changing ROMs
A kernel with the kexec-hardboot patch does not exist as of yet. It is being worked upon by me.
Hence for now, please use the recovery to swap the ROMs
Source Code
MultiROM - https://github.com/regalstreak/multirom (branch: master)
Modified TWRP - https://github.com/Tasssadar/Team-Win-Recovery-Project (branch: android-6.0)
Kernel w/ kexec-hardboot patch (being worked upon) - https://github.com/regalstreak/android_kernel_oneplus_msm8994/tree/android-6.0-mrom
Device tree: https://github.com/regalstreak/android_device_oneplus_oneplus2/tree/android-6.0-mrom (branch android-6.0-mrom)
Credits
This port is based on the hard work of Tassadar, Geoff Levand, webgeek1234, Mike Kasick, Npjohnson, Hashbang173, 500 Internal Server Error and many others. Thank you.
Special thanks to @500 Internal Server Error for porting MultiROM to arm64 devices!
Donations
I'd be glad if you could spare a few bucks. You can use either Paypal or Bitcoin, my address is 1mg1HJcNTrNNPbrQqKXsUgdDfZhGo2acC
Also consider donating to @Tasssadar
Thanks to all donors, it is much appreciated!
Downloads
MultiROM Recovery
MultiROM Installer Flashable ZIP
MultiROM Uninstaller Flashable ZIPs
Reserved Post 1
Reserved Post 2
Wow, You made it. You Da real MVP.
Will report back here.
Perfect. Works perfectly. Able to swift between roms. Thanks a lot. This takes development to a whole new level.
MultirROM --> Ubuntu Touch!
Finally!
You are one of the best devs out there
regalstreak said:
Downloads
MR-TWRP IMG: recovery-20160228.img
MultiROM Installer Flashable ZIP: multirom-20160228-v33-UNOFFICIAL-oneplus2.zip
MultiROM Uninstaller Flashable ZIP: multirom_uninstaller.zip
All being uploaded. Keep calm please
Click to expand...
Click to collapse
R I O T
jk good work man!
Sent from my ONE A2005 using Tapatalk
Links up. Please test!
TESTING
added cm13 as secondary and oxyslim as primary
currently its flashing.
will report
edit - booting oxyslim... after booting ill try to boot secondary rom
edit 2 - booting cm13
so.. swapping works
How to switch between roms? Have not boot Menü
Ok. Sorr, only swap works this time.
rakieta said:
How to switch between roms? Have not boot Menü
Ok. Sorr, only swap works this time.
Click to expand...
Click to collapse
Go to recovery and switch rom.
Thanks a ton @regalstreak. Literally been waiting for ages for this! You da real MVP!
Is there anyway to transfer my "dual boot patcher" roms (primary and 3 data slot roms) to multirom?
JudderArts said:
Is there anyway to transfer my "dual boot patcher" roms (primary and 3 data slot roms) to multirom?
Click to expand...
Click to collapse
Haha nice idea
But there isnt any way you will have to manually do it!
Recovery won't work with H2OS M version, right?
regalstreak said:
Haha nice idea
But there isnt any way you will have to manually do it!
Click to expand...
Click to collapse
Manually as in flash them again and such?
lucasbtx said:
Recovery won't work with H2OS M version, right?
Click to expand...
Click to collapse
I guess yeah as h2os is too pretty ****ed up, it doesnt even have a kernel source :3
JudderArts said:
Manually as in flash them again and such?
Click to expand...
Click to collapse
yes bro
Hi dear. I can't find kernel on 2nd post. Will it be enough to have my existing primary kernel.
Sent from my ONE A2001 using Tapatalk
Awesome Regal !!! I also made my multirom for op2 some days ago but wasn't able to build kernel too.... Thus didn't make thread.... See the commits for our kernel on github.com/multirom-op2
Looks like a problem at ramoops ... Everything else is perfect....
Sent from my ONE A2003 using Tapatalk
So question...is there any way to share app data or such between Roms? Possibly a noob question but still gonna ask ?