Hi all!
Here recently anytime I use one of the KK based roms, once I make a call, the screen no longer works. I can't get it to come back on until the call has ended. There have been a few times where I've been able to get the screen to light up again and it will work until I go back to the actual call and then it's totally unresponsive. I've tried different dialers and the same thing happens. Any ideas?
Christogq said:
Hi all!
Here recently anytime I use one of the KK based roms, once I make a call, the screen no longer works. I can't get it to come back on until the call has ended. There have been a few times where I've been able to get the screen to light up again and it will work until I go back to the actual call and then it's totally unresponsive. I've tried different dialers and the same thing happens. Any ideas?
Click to expand...
Click to collapse
Hello
I had the same problem lately with different galaxy model, the problem was with light sensor, the screen was not fixed correctly at the corner of light sensor, so I had to push it down little bit the get the light inside the sensor,
dose the light sensor work correctly with viber for example?,
You could try test your phone light sensor by entering general testing mode by entering *#0*# inside dialer and go to "sensor" to test the light sensor put your finger over the light sensor and see if the screen become green or not if so then your problem is not with the light sensor, check if the touch screen is fixed correctly form all the corners.
Good Luck
khaldonm said:
Hello
I had the same problem lately with different galaxy model, the problem was with light sensor, the screen was not fixed correctly at the corner of light sensor, so I had to push it down little bit the get the light inside the sensor,
dose the light sensor work correctly with viber for example?,
You could try test your phone light sensor by entering general testing mode by entering *#0*# inside dialer and go to "sensor" to test the light sensor put your finger over the light sensor and see if the screen become green or not if so then your problem is not with the light sensor, check if the touch screen is fixed correctly form all the corners.
Good Luck
Click to expand...
Click to collapse
It's only when i use a new KK Rom. I can use the TW Roms and it works perfectly fine.
I did the test and it's green when I don't cover it and goes to red when I cover it.
Just tried a 4.4.3 Rom and it still won't work.
I went back to a 4.2.2 TW rom and everything is working fine.
Related
When I'm in a call and put the phone to my ear the screen does not turn off instantly. Only after the screen timeout period has reached does the screen goes off. Is this normal?
Hello, and sorry for my english, i have the similar issue, when i put the phone on my ear the screen continue on, only in a few second appear lock the screen. I have another issue: the ambient senson, in darkness and sun light the automatic brightness doesn't change the bright of the screen, only when i enter to the brightness settings and change the bright automatic off and on go right, i believe that is problem of the firmware, my firmware version is the spanish vodafone version. Can i change to the generic firmware via Sonyericsson Update Service software??
kiwi45 said:
When I'm in a call and put the phone to my ear the screen does not turn off instantly. Only after the screen timeout period has reached does the screen goes off. Is this normal?
Click to expand...
Click to collapse
I don't think the proximity sensor would switch off your screen instantly. It will ignore all touches to the screen so you wouldn't touch something by mistake. The screen will be off later. Can test it with your fingers on the sensor during a call.
shvyue said:
I don't think the proximity sensor would switch off your screen instantly. It will ignore all touches to the screen so you wouldn't touch something by mistake. The screen will be off later. Can test it with your fingers on the sensor during a call.
Click to expand...
Click to collapse
I did that. If the sensor is blocked with my finger or ear the touch can't be used. But the screen turns off quite a bit later than that. I think it's the same screen off settings that you use normally when the phone is unlocked and you don't lock it.
I've notice that my sensor doesn't seem to work. Under the brightness option if I check the "Adjust automatically" the screen still does not adjust the brightness. Also noticed the screen goes dark a minute in on a call, when I move it from my head it does not go bright. Sometime I have to unlock screen if call is longer than a few minutes.
Yep normally proximity sensors (on Nokia, iPhones..etc) turn off the screen immediately when ur face is close. Some examples:
http://www.youtube.com/watch?v=6xakUmz1zwc
http://www.youtube.com/watch?v=YjlDm9zGLpc
kiwi45 said:
Yep normally proximity sensors (on Nokia, iPhones..etc) turn off the screen immediately when ur face is close. Some examples:
http://www.youtube.com/watch?v=6xakUmz1zwc
http://www.youtube.com/watch?v=YjlDm9zGLpc
Click to expand...
Click to collapse
Yeah, that's true. But I know that mine works! It's just not turning off the screen. Don't really know if it's supposed to do that though. But I think so!
Just spoke to vodafone and they are sending me a replacement tomorrow.I doubt that will sort the problem. But its worth s try!
Sent from my X10i using the XDA mobile application powered by Tapatalk
The Proximity sensor works fine. However it works differently from what you would expect:
-When making a phone call the sensor detects your big head and locks the screen (put your finger near the sensor to try it, you won't be able to push any buttons on the screen).
-It only locks the screen. The screen turns off after some time.
-When the screen is off during a call and you remove your head (or finger) from the sensor the display turns on again.
Works fine for me! Don't kill SE because they do it differently then other manufactures, it works just fine.
Well I wish I could disable the proximity sensor right now.
I am trying to make a call without my big head bloking the proximity sensor, as I need to dial a number get trough the switchboard. (right now its lying flat on my desk while I am dialing.. So no head at all, just roof)
and the screen is still locked so I cant press the number 1.
The strange thing it worked when I called SE support, but it doesnt work now.
But right now when I need it, it does not work.
Vin87 said:
The Proximity sensor works fine. However it works differently from what you would expect:
-When making a phone call the sensor detects your big head and locks the screen (put your finger near the sensor to try it, you won't be able to push any buttons on the screen).
-It only locks the screen. The screen turns off after some time.
-When the screen is off during a call and you remove your head (or finger) from the sensor the display turns on again.
Works fine for me! Don't kill SE because they do it differently then other manufactures, it works just fine.
Click to expand...
Click to collapse
drfjeld said:
Well I wish I could disable the proximity sensor right now.
I am trying to make a call without my big head bloking the proximity sensor, as I need to dial a number get trough the switchboard. (right now its lying flat on my desk while I am dialing.. So no head at all, just roof)
and the screen is still locked so I cant press the number 1.
The strange thing it worked when I called SE support, but it doesnt work now.
But right now when I need it, it does not work.
Click to expand...
Click to collapse
That is indeed strange. I've just tested it several times:
Make a call> Let the screen turn off>remove from my big head>screen turns on >screen is unlocked and I can acces the 'dialer'.
Well as I wrote, sometimes I can do it sometimes I can't.
I will try to clean the proximity sensor (right side of the Sony Ericsson logo)
the next time it happens. Maybe its to over sensitive.
Right now it works to the same number I was trying earlier..
Vin87 said:
That is indeed strange. I've just tested it several times:
Make a call> Let the screen turn off>remove from my big head>screen turns on >screen is unlocked and I can acces the 'dialer'.
Click to expand...
Click to collapse
Is it right to assume that the auto brightness is controlled by the proximity sensor. When I change my screen brightness to auto. It goes dull and stays dull.
Sent from my X10i using the XDA mobile application powered by Tapatalk
Ny88 said:
Is it right to assume that the auto brightness is controlled by the proximity sensor. When I change my screen brightness to auto. It goes dull and stays dull.
Sent from my X10i using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
I think that's another sensor actually.
Hello Frnds i have facing problem with my mini pro..
my hardware querty keypad lights are not turning on...however if i lock my fone with on/off switch & than press again for unlock than my keypad lights are turned on but only for 1-2 seconds & than turned off automatically...
please help me out with any solution is it the problem with ambient light sensor? or any thing else?
manjeet15 said:
Hello Frnds i have facing problem with my mini pro..
my hardware querty keypad lights are not turning on...however if i lock my fone with on/off switch & than press again for unlock than my keypad lights are turned on but only for 1-2 seconds & than turned off automatically...
please help me out with any solution is it the problem with ambient light sensor? or any thing else?
Click to expand...
Click to collapse
Have you tried to close the ambient sensor with your hand? If you're on dark room it should automatically lid. but if you're on the bright room, it is of course turned off. there's an app on Market to monitor the ambient sensor. Play with your thumb above the sensor to see if it's working or not.
hansip87 said:
Have you tried to close the ambient sensor with your hand? If you're on dark room it should automatically lid. but if you're on the bright room, it is of course turned off. there's an app on Market to monitor the ambient sensor. Play with your thumb above the sensor to see if it's working or not.
Click to expand...
Click to collapse
hello i tried to close the ambient sensor with hand..but keyborad lights not lid..
even in dark or night its not on..however only worked for 1-2 seconds when i lock/unlock fone via on/off swicth..
however will update u once checked out ambient sensor after downloading application from market
i cant found any application to test my ambient sensor..
is there any other method to test that my ambient sensor is working
my proximity sensor is working
manjeet15 said:
i cant found any application to test my ambient sensor..
is there any other method to test that my ambient sensor is working
my proximity sensor is working
Click to expand...
Click to collapse
The name of apps is ProxyLightTester. give it a try.
hello thanks frnd after installing it & using it its shows that my proximity & light sensor is working while holding hand on light sensor the mobile image in the application got clearly displayed & the numbers of light sensor increases/dicreases...
however my keyboard light dont lid while using it or opening it as usual any help please
well, maybe reflash? dunno for another solution.. if it still persist, maybe you need to reflash with SEUS.. if it still like that, maybe you can ask to Sony Center i guess..
hansip87 said:
well, maybe reflash? dunno for another solution.. if it still persist, maybe you need to reflash with SEUS.. if it still like that, maybe you can ask to Sony Center i guess..
Click to expand...
Click to collapse
actually my fone fall into the water 1 week ago..than i opened it & than close it after removing water etc.. from whole fone after that its working fine no problem at all..
but keypad lyts not working from last 2 days i think (but lights gets lid when we unlocked the fone either by sliding up the keyboard or by lock key but only for 2-3 secs than go off automatically even in dark)
so i want to know is it hardware problem?? that does not seems to be
or any software problem..
i update via seus 2-3 times but no works
is any other way to light it up the keyboards while we open it & ambient light sensor is also working
i cant find wat to do.. & due to water damage i think warranty also void..
no 1 to help frnds?
is there no 1 to help friends?
my keypad lights are working all are lid but only for few seconds may called it for 2 seconds that also when we unlock the phone either by slideout the keyboard or by pressing the unlock button...
i flash my fone 2-3 tyms by seus but no sollution...
is there any solution via changing drivers etc to enable keyboard lights only when we slideit out without the use of sensor or else..however my sensor is working
or any 1 please provide me there folder files of "sys/devices/platform/msm_pmic_misc_led.0/"
Hmm i don't know any other solution manjeet. But i want to share you the same experience like yours..
I have just reflashed into the normal firmware. but when i tried to test the light by closing the light sensor, i am surprised to know that the keyboard was not lid too! It just works for 1 second when i open the keyboard, and turns off soon. i was in panic then, but i tried to be calm, and when i tried to hide into a dark room, it works again. Fiuhh..
I don't know but maybe you need to really go to the dark places. Seems that the Proximity sensor and Light sensors work in tandem. If it still fails in the dark, then i guess you really need to have it serviced.. Dunno bout the cost, but it shouldn't be too expensive..
Good luck with your u20i bro.
thanx hansip......
hansip87 said:
Hmm i don't know any other solution manjeet. But i want to share you the same experience like yours..
I have just reflashed into the normal firmware. but when i tried to test the light by closing the light sensor, i am surprised to know that the keyboard was not lid too! It just works for 1 second when i open the keyboard, and turns off soon. i was in panic then, but i tried to be calm, and when i tried to hide into a dark room, it works again. Fiuhh..
I don't know but maybe you need to really go to the dark places. Seems that the Proximity sensor and Light sensors work in tandem. If it still fails in the dark, then i guess you really need to have it serviced.. Dunno bout the cost, but it shouldn't be too expensive..
Good luck with your u20i bro.
Click to expand...
Click to collapse
thanx bro.. my mini pro is just working fine no prob at all...& i check it in total dark also..but its not work
however i didnt need keyboard light as such but its looks odd in dark nothing much..
i only want that if its software prob than why not i fix it with my own.. at last i go for repair shop no tension regarding cost but i want to know is it repairable by our own or not...
may b any1 else facing this prob & short it out...
Try this!! Kfix thread
hi all
i have spent almost 2 days for an answer , no luck
my problem is
my phone s3 lte . screen turns of as soon as i obstruct the front camera and the 2 sensors area . it was ok before , since few days it started doing this . now i cant take screen shot pictures by moving my palm across the screen for example , not sure what this is due to
any help please .?
You've posted in the wrong section, questions go in q&a section -those for the i9305 stand more chance of a reply that won't brick your phone in the special q&a for LTE phones.
Report your own post and ask for it to be moved.
Having said all that, you've probably got a corrupt framework or a hardware fault. Flash a fresh official stock rom after a factory reset to test. If it's still the same then send for repair.
Is this when in a call sorry to ask noob question just curious if your covering the proximity sensor
Sent from my GT-I9300 using Tapatalk 4
tonyt3rry said:
Is this when in a call sorry to ask noob question just curious if your covering the proximity sensor
Sent from my GT-I9300 using Tapatalk 4
Click to expand...
Click to collapse
thank you all for helping , i have switched the phone off removed battery and now sorted .
it was not during call only but all the time .
it seems that the problem resolved on its own .phone was scared of me posting in xda lol
thx
Screen Blanks out on Galaxy tab
I ran this test and your screen is only supposed to change color from white to green during the test. My screen blanks out completely during the test.
Not sure if the sensor is bad or if it is a software or and OS issue yet.
you tube.c om /watch?v=N8G6ksaciho
Need advice.
I just received a SM-T705Y, KitKat. When I am in only some applications not all, the screen shuts completely off when my finger passes over the two sensors/camera near the word "SAMSUNG" at the top of the device. I have tested the cause and done it repeatedly by putting a small piece of black electrical tape on the sensor.
With the tape on the sensor, the screen never shuts off. The screen then will come back on several seconds after I remove my finger/tape from the sensor. Also, I do not have to actually touch the sensor to get the screen to turn off. But it activates the lock screen when it does turn off. ANNOYING !!!
My SM-T705Y is not rooted. It is in developer mode.
I think its the sensor that turns the screen off when you take a phone call is still stuck on ???
I have the phone proximity sensor turned off in: Settings> When I'm the phone screen The screen stays on.
Auto adjust screen tone : ON
Auto brightness is off
I have the "Smart Stay" turned off in: Settings>Device>Display.
Screen timeout set to 10 minutes. Screen mode set to "AMOLED Cinema"
I have restarted, not rebooted the SM-T705Y
forums. android central.com/lg-optimus-g-pro/
358206-screen-goes-black-when-front-facing-camera-covered
forums.android central.com/andro
id-4-1-4-2-4-3-jelly-bean/309867-screen-goes-off-when-my-hand-passes-camera
android forums.com/threads/screen-turns
-off-when-camera-blocked.746785
Milwaerinc at gmail.com
.
The proximity sensor is located there. That's why you have that issue. It's normal behaviour.
If you are trying to turn the screen off during calls there is an option to do so in either calls settings or display settings.
If you move the phone away from your head it will turn the screen on. It's a proximity sensor, thats its job!.
Beamed in by telepathy.
Fix
I have same problem with my samsung and I fix it!
Just close all recently used app (press button next to menu button and close all) and you will have normal screen..... Looks like some app, especially call app make problem and activating proximity sensor. So one more time close all recently used app, press button next to menu button and close all app....
Good Luck!
Marko
Hi guys.I have a problem with my LG G2 D802.When I answer a call or make a call,the screen goes blank and the touch doesn't work anymore.I can't do anything else on the phone.The conversation is normal and anything else seems to be ok.Please help! Thank you.
If I answer a call,the screen goes blank,I can speak normally:After the call even the other person finishes the conversation,I still can't do anything on the phone,because the screen stays blank.If I have another call this will awake the screen and it will work normally,I mean,I can take the call,answer and speak on the phone but with the screen blank again. and so on.To have the phone back to normal,I have to reboot it by switching the phone off and on again. Very strange.This happened after I unlocked the phone ,probably because I left the SIM card in ?!!! Any possible advice/solution? I tried soft and hard/factory reset with no results.
help reguading the g2 screen blackout during calls
madafis said:
Hi guys.I have a problem with my LG G2 D802.When I answer a call or make a call,the screen goes blank and the touch doesn't work anymore.I can't do anything else on the phone.The conversation is normal and anything else seems to be ok.Please help! Thank you.
If I answer a call,the screen goes blank,I can speak normally:After the call even the other person finishes the conversation,I still can't do anything on the phone,because the screen stays blank.If I have another call this will awake the screen and it will work normally,I mean,I can take the call,answer and speak on the phone but with the screen blank again. and so on.To have the phone back to normal,I have to reboot it by switching the phone off and on again. Very strange.This happened after I unlocked the phone ,probably because I left the SIM card in ?!!! Any possible advice/solution? I tried soft and hard/factory reset with no results.
Click to expand...
Click to collapse
I actually had this same issue. my g2 is rooted, but running the stock rom. it has a screen protector but nothing else that would impede the sensors.
I found that this issue never took place in well lit areas. but if at night sitting i a poorly lit room I would go to swipe the scree it would unlock for a second or two and then lock back up. in talking with a friend. I found that the g2 has in set so in the proximity of a pocket or something dark the screen dims back so as to not allow you to mistakenly hit ay button ( i.e. butt dial) i figured my proximity sensor near the ear piece was dirty and causing much less light then there actually was. at the time there wast a firmware update ( which I have now gotten) and was desperately seeking help.
I finally got the firmware update VS98012B and it seems to have solved the issue I ( and you) was having. I would see what version you are running now and then update to the aforementioned and see if that solves your problem.
PM me and let me know what road you decide to travel and if for some reason it doesn't help you we shall figure it out.
Blank Screen
I am having sort of the same issue. But mine is wether in a well lit room or dark room it doesn't matter.
I noticed that it usually happens when i receive a call, after the conversation when i hang up it does not go back to the home screen. all i get is a blank screen. the only way i can get it to generate the home screen again is by pulling down the status bar and going into the general settings and clicking home button again.
during this blank screen i can still see the status bar, and when i bring down the status bar i can see the nav buttons but they are unresponsive.
I also noticed this takes place sometimes after closing an app (noticed on netflix)
I am rooted on stock rom and TWRP recovery. Phone Model [LS-980 Sprint]
I immediately rooted so dont know if issue was there before root.
SOMEONE PLEASE HELP.
Bam9 said:
I actually had this same issue. my g2 is rooted, but running the stock rom. it has a screen protector but nothing else that would impede the sensors.
I found that this issue never took place in well lit areas. but if at night sitting i a poorly lit room I would go to swipe the scree it would unlock for a second or two and then lock back up. in talking with a friend. I found that the g2 has in set so in the proximity of a pocket or something dark the screen dims back so as to not allow you to mistakenly hit ay button ( i.e. butt dial) i figured my proximity sensor near the ear piece was dirty and causing much less light then there actually was. at the time there wast a firmware update ( which I have now gotten) and was desperately seeking help.
I finally got the firmware update VS98012B and it seems to have solved the issue I ( and you) was having. I would see what version you are running now and then update to the aforementioned and see if that solves your problem.
PM me and let me know what road you decide to travel and if for some reason it doesn't help you we shall figure it out.
Click to expand...
Click to collapse
I decided to open the phone and check the proximity sensor.I unplugged the proximity sensor ribbon and guess what:IT WORKS.without the functions of the proximity sensor and LED.But at least,I have the keypad and the screen on during a conversation.I have even the knock-knock function.Probably,I will use it like that until a kit-kat update will be available.Thanks for your answer.
VS980 Black Screen
I have a customer phone that I replaced the LCD and Digitizer on. The new screen works fine but...now when a SIM Card is in the phone and I dial out a thin horizontal line appears in the middle of the screen and then the screen goes black.
If I remove the SIM card and place a call, the phone gives me the standard "Emergency Calls Only" and goes back to the dial pad.
The SIM Card is not activated but it is recognized by the phone.
Has anyone else had this issue? I tried a factory restore with no luck.
madafis said:
I decided to open the phone and check the proximity sensor.I unplugged the proximity sensor ribbon and guess what:IT WORKS.without the functions of the proximity sensor and LED.But at least,I have the keypad and the screen on during a conversation.I have even the knock-knock function.Probably,I will use it like that until a kit-kat update will be available.Thanks for your answer.
Click to expand...
Click to collapse
Hi,
I have the same issue , my screen turns black when calling or receiving calls , i m not really good with my hands... so do you know other solutions to disable the proximity sensor ?
thanks
Same issue here - LG G2 screen turn off and goes blank during conversations
I have exactly the same issue - LG G2 D802 screen turn off and goes blank during conversations.
Thanks to @Bam9 and @EtherBoo , who suggested to clear the proximity sensor from the outside and squeeze the top left corner of the phone, I tried to clean it and put some stress on it - and it worked!
Another issue which I also have and is also caused by the proximity sensor is that the screen stays on and the touch buttons in the dialer aren't responsive - which means we can't switch to speaker, add a call, mute, etc... However, the main touch / navigation button (home, back and menu buttons in the bottom of the screen) are responsive, in addition to the status bar.
(This issue was already reported by @athorax here)
In both of these situations the only quick way to end a call is to pull down the status and notifications bar and hang up from there.
I have a glass screen protector (which don't block the proximity sensor), and I am rooted and using CyanogenMod 11 ROM.
I used ioroot to root and AutoRec, which comes with TWRP 2.7.0.0, to install CyanogenMod ROM.
However, going back to stock ROM (in my case, LG G2 D802, it's D80220C) won't help since the issue still exists.
What I'm sure is that it was pretty much okay in the beginning, and the situation became worse and worse - occurring randomly, until it arrived to a situation in which I can't use the phone properly during conversation.
Now that I discovered that I can put some stress on the proximity sensor it seems that I have a hardware rather than a software issue.
Bam9 said:
I actually had this same issue. my g2 is rooted, but running the stock rom. it has a screen protector but nothing else that would impede the sensors.
...
i figured my proximity sensor near the ear piece was dirty and causing much less light then there actually was. at the time there wast a firmware update ( which I have now gotten) and was desperately seeking help.
...
I finally got the firmware update VS98012B and it seems to have solved the issue I ( and you) was having.
Click to expand...
Click to collapse
So for you it was a software issue?
Is your sensor working until today with no issues?
ingoljosh said:
I am having sort of the same issue.
...
I am rooted on stock rom and TWRP recovery. Phone Model [LS-980 Sprint]
I immediately rooted so dont know if issue was there before root.
Click to expand...
Click to collapse
I'm also rooted and with TWRP.
Did it happened before you rooted?
Did you used ioroot to root andAutoRec to have TWRP?
You see, I'm really trying to find the similarities between us all in order to solve this issue...
madafis said:
I decided to open the phone and check the proximity sensor.I unplugged the proximity sensor ribbon and guess what:IT WORKS.without the functions of the proximity sensor and LED.But at least,I have the keypad and the screen on during a conversation.I have even the knock-knock function.Probably,I will use it like that until a kit-kat update will be available.
Click to expand...
Click to collapse
We already have KitKat based firmware update. For me it's D80220C.
For you it might be already D80220D. Use this link to check your version, and replace the IMEI in the end of it with your IMEI.
BobbyLG said:
...now when a SIM Card is in the phone and I dial out a thin horizontal line appears in the middle of the screen and then the screen goes black.
If I remove the SIM card and place a call, the phone gives me the standard "Emergency Calls Only" and goes back to the dial pad.
Has anyone else had this issue? I tried a factory restore with no luck.
Click to expand...
Click to collapse
When you place the call you do hear that the call is made?
If so - then you have exactly the same issue.
What is your model, what ROM are you using, and did you root your phone?
I have LG G2, unable to make call. The signal strength is fine. I have tried reinserting the sim. but i am able to receive calls. when i make a call the dialup screen come up and call ended automatically. Any Help
Hey guys i bought this phone few days ago i am facing proximity sensor issues right now
when i try to call someone it will randomly go to dark screen
proximity sensor in testing apps does not work correctly
i tried removing the screen protecting glass and case it still persist
i thought this issues might have been fixed with the new update it doesn't guys should i return this device and get new one
Mi 11x pro uses a ultrasound chip for the proximity sensor and this works combined with other sensors like the gyro. So when you put the earpiece to your ear it detects an orientation change and switches the display off. I'm currently on indian miui v12.5.2 and don't face the issue you mention. Slow movements are known to confuse the phone. Other than that the screen shouldn't switch off after initiating the call unless you change its orientation. Testing apps work with orientation change.
ncrobin said:
Hey guys i bought this phone few days ago i am facing proximity sensor issues right now
when i try to call someone it will randomly go to dark screen
proximity sensor in testing apps does not work correctly
i tried removing the screen protecting glass and case it still persist
i thought this issues might have been fixed with the new update it doesn't guys should i return this device and get new one
Click to expand...
Click to collapse
Almost all of the sensor apps fail this, but in call I have no problem whatsoever.
Are you having trouble during calls?
pranay60 said:
Mi 11x pro uses a ultrasound chip for the proximity sensor and this works combined with other sensors like the gyro. So when you put the earpiece to your ear it detects an orientation change and switches the display off. I'm currently on indian miui v12.5.2 and don't face the issue you mention. Slow movements are known to confuse the phone. Other than that the screen shouldn't switch off after initiating the call unless you change its orientation. Testing apps work with orientation change.
Click to expand...
Click to collapse
Wow, new info, didn't know that, thanks
I have the same problem on my Mi11i... well... my problem is that the screen wont turn on when I move my phone away from my ear... the screen stays off, i cant get it to turn on even if i press the power button. Annoying as hell... You call someone, he doesent answer, and you cannot cancel the call because the screen is black and no way to turn it on! Or to check a phone number or email.... I will send it back as a warranty isue....
The problem is with MIUI 12.5.4.0, we need to wait for the fix with newer version of MIUI or try to install xiaomi.eu ROM
Hi Guys, i'm using Xiaomi 11x pro version 12.5.2. I'm facing proximity sensor issue also proximity sensor option not available in my phone in incoming call setting. please help on this.