Related
touchscreen has half not working, anyone has any solution tyo remote control the screen so i can acess the settings?
this Java app can be used to view and control watch via ADB only:
https://github.com/MajeurAndroid/Adb-Remote-Screen
I have the same problem, my right touch stopped working and I can't access the watch options or the last 2 weather information, you can try using adb command to reset the watch, in my case it is still not working. My watch is new and I have used it only for 1 week
I have exactly the same problem. Is this ROM related?
The right side of the touchscreen seems to be working on all other screens - I can for instance access the Compass and the Stopwatch that are also on the right side but on a different menu.
There's a youtube video showing the problem but I can't post because I'm newly registered. Just search for "Settings Button on Amazfit Stratos Not Working" on Youtube.
same problem
my stratos is with the same problem.
one solution would be to develop a ROM with the configuration button on the left side of the screen.
---------- Post added at 02:46 AM ---------- Previous post was at 02:34 AM ----------
lfom said:
this Java app can be used to view and control watch via ADB only:
Someone tried this?
Click to expand...
Click to collapse
New firmware update didn’t fix the problem for me ?
I tried installing different ROMs but nothing seems to work, i think that the problem is the touchscreen and not software related.
The only way to access the watch setting that i found is to enable the app list using the huami amazfit tool and then swipe at the end and select settings (which is written in chinese).
Since i have the watch bootloader unlocked, i'm not sure if you can enable the app list with the bootloader locked.
Hope it helps. :good:
Andreaji said:
I tried installing different ROMs but nothing seems to work, i think that the problem is the touchscreen and not software related.
The only way to access the watch setting that i found is to enable the app list using the huami amazfit tool and then swipe at the end and select settings (which is written in chinese).
Since i have the watch bootloader unlocked, i'm not sure if you can enable the app list with the bootloader locked.
Hope it helps. :good:
Click to expand...
Click to collapse
If you go all the way to the right and access the menu where you have the Compass and the Stopwatch, can you click on those? I can, and that's why I think it is software related but of course, I might be wrong
sribas said:
If you go all the way to the right and access the menu where you have the Compass and the Stopwatch, can you click on those? I can, and that's why I think it is software related but of course, I might be wrong
Click to expand...
Click to collapse
In my case it is hardware issue, the right touch is not working in any others screen.
You can check the touchscreen response by activating the hidden mode Lab and then enable the pointer location. If i touch the left part it appears the pointer and all the movement that i do, if i try to touch the right part nothing happens, it's dead, hardware issue
I have the same issue. But with latest international firmware 2.3.5.0. Did you solve it? What did Amazfit support say?
Something weird. After some useless rebooting and using the ADB remote screen I can now use the lower right part of the touchscreen again. However now sometimes the widgets just jumping forth and back.
Hey,
I have the same problem.
app control
Andreaji said:
I tried installing different ROMs but nothing seems to work, i think that the problem is the touchscreen and not software related.
The only way to access the watch setting that i found is to enable the app list using the huami amazfit tool and then swipe at the end and select settings (which is written in chinese).
Since i have the watch bootloader unlocked, i'm not sure if you can enable the app list with the bootloader locked.
Hope it helps. :good:
Click to expand...
Click to collapse
This app is for Android?
Do you can access settings wifi, time format, ....?
Just use ADB remote screen for this.
Please help, is this above described mostly unresponsive touchscreen (setting icon) a software problem or a hardware problem? I cannot try out because I do not want to loose warranty while flashing back or to the latest chinese beta. I just have recognized it since 2.3.5.0. Thanks!
I did not rinse the watch with water for some days because I did not do workouts with it. Now the touch screen is working more and more again. There is still a dead spot in the middle which makes swiping down the quick settings menu a bit difficult but the settings and brightness icons are now working again. I guess there is water within the watch causing this. Maybe the watch is not as swimmprove as advertised. I just did one pool while taking care of kids. Nothing more. Since it is a swimming watch, water is probably not coming out of it's own.
Good news, I'll trying.
I'll trying good luck for us.
SteffenBerlin said:
I did not rinse the watch with water for some days because I did not do workouts with it. Now the touch screen is working more and more again. There is still a dead spot in the middle which makes swiping down the quick settings menu a bit difficult but the settings and brightness icons are now working again. I guess there is water within the watch causing this. Maybe the watch is not as swimmprove as advertised. I just did one pool while taking care of kids. Nothing more. Since it is a swimming watch, water is probably not coming out of it's own.
Click to expand...
Click to collapse
Guys, do you know if that screenshot off the hardware menu of stratos is normal?
I just bought it. First thing as soon as I paired it, it was to upgrade at 2.6.3.1
As I was checking out I noticed that on "Stopwatch" I couldn't press the reset/lap button whatever I tried.
Also at "Timer" I couldn't press the stop button or couldn't select the minutes on previews screen.
It seem to me that the lower left corner off the touchscreen isn't responding.
Does my finding on hardware menu (picture) confirms that?
left corner
P.S. : None intervention was made at the watch. Only upgrading.
I restored to factory settings 3 times and the problem remains.
nutrialex said:
Guys, do you know if that screenshot off the hardware menu of stratos is normal?
....
Click to expand...
Click to collapse
If you clean it very well and the problem persists, then probably the digitizer (touchscreen) is damaged.
I just got my Stratos back from repair. They apparently replaced the touchscreen. But I don't know if it was caused by water entering the device or just a crappy screen. But now it is working fine.
Hi, I got my Mi 3 this week. I noticed some weird behavior from my magnetometer and Accelerometer, wondering if anybody else is experiencing the same. After a day of use, sensors go haywire and suddenly stop reporting data. Can't use compass and my auto rotate stops working. I tried different apps to see if it's a global problem or just a not compatible app, so far when sensors go blank, the effect is global. Even the Mi self test is not reading anything from the sensors. Pedometer is on the other hand operational tho.
Things come back to normal after a restart. I suspect it must be a software bug maybe?
sherlock.holmes said:
Hi, I got my Mi 3 this week. I noticed some weird behavior from my magnetometer and Accelerometer, wondering if anybody else is experiencing the same. After a day of use, sensors go haywire and suddenly stop reporting data. Can't use compass and my auto rotate stops working. I tried different apps to see if it's a global problem or just a not compatible app, so far when sensors go blank, the effect is global. Even the Mi self test is not reading anything from the sensors. Pedometer is on the other hand operational tho.
Click to expand...
Click to collapse
My sensors are working but they are wrongly calibrated :/ and pedometer isn't working! I thought the pedometer was disactivated by default...
greenpays said:
My sensors are working but they are wrongly calibrated :/ and pedometer isn't working! I thought the pedometer was disactivated by default...
Click to expand...
Click to collapse
Dial *#*#6484#*#* it's the built-in test. U can recalibrate your accelerometer there and also test the device. Use power button to exit. And for +-45 test's of the accelerometer tilt your device on it's corners.
sherlock.holmes said:
Dial *#*#6484#*#* it's the built-in test. U can recalibrate your accelerometer there and also test the device. Use power button to exit. And for +-45 test's of the accelerometer tilt your device on it's corners.
Click to expand...
Click to collapse
Thanks for the tip it works perfectly!
By the way, you are using European firmware or Global, because for me the pedometer isn't counting the steps :/
greenpays said:
Thanks for the tip it works perfectly!
By the way, you are using European firmware or Global, because for me the pedometer isn't counting the steps :/
Click to expand...
Click to collapse
I'm glad to hear it worked for you. My pedometer comes and goes... Not reliable unfortunately. btw how can I check my ROM region? Got the October patch, It doesn't solve the bug...
I also have problems with my vibrator. It doesn't react to short vibrations (that much I can make out of it).
sherlock.holmes said:
I'm glad to hear it worked for you. My pedometer comes and goes... Not reliable unfortunately. btw how can I check my ROM region? Got the October patch, It doesn't solve the bug...
I also have problems with my vibrator. It doesn't react to short vibrations (that much I can make out of it).
Click to expand...
Click to collapse
Well I seem to have the global version. MIXM
I hope they get problems solved fast.
If anybody else with the device is reading this post, can you please check your sensors with an appropriate app and see if yours is also malfunctioning randomly?
I had this problem, but I just restarted the device and everything came back normal
braulio_holtz said:
I had this problem, but I just restarted the device and everything came back normal
Click to expand...
Click to collapse
Yes! It goes away with restarting (and sometimes doesn't!!!)
But it's just a temporary fix, in matter of hours, you r back to the square one.
sherlock.holmes said:
I'm glad to hear it worked for you. My pedometer comes and goes... Not reliable unfortunately. btw how can I check my ROM region? Got the October patch, It doesn't solve the bug...
I also have problems with my vibrator. It doesn't react to short vibrations (that much I can make out of it).
Click to expand...
Click to collapse
Go to Accessibility settings and turn on Touch Vibration. Keeping it off also hinders the in call volume function. Hope it helps
Arkapravoarka said:
Go to Accessibility settings and turn on Touch Vibration. Keeping it off also hinders the in call volume function. Hope it helps
Click to expand...
Click to collapse
Well yeah, it did work actually. But the thing is, I don't like to have the touch vibrations on always, I just want it to work with G-board and some other apps that use short vibrations as a feedback...
It's like the touch vibrations setting, controls everything lol.
It's definitely a bug they have to get fixed.
So it turns out the sensor problem that I reported is being caused by the G-cam port I had installed. The solution is to close the app (in the multitasking menu !?) Whenever you are done using it.
Flash the stock rom again and your problem will be solved for sure, also faced the same issue.
I have same issue and flash stock rom but still not working how can i fix it ?
I also have a problem with compass apps. north and south are correct shown, west and east are not correct.
Stefan_1 said:
I also have a problem with compass apps. north and south are correct shown, west and east are not correct.
Click to expand...
Click to collapse
I use this solution and it worked.
https://forum.xda-developers.com/showpost.php?p=82161897&postcount=4
My Mi A3 has just got an system update of android 10. Just after that, my camera isn't working. Please help me out of this problem.
Chaitanya123 said:
My Mi A3 has just got an system update of android 10. Just after that, my camera isn't working. Please help me out of this problem.
Click to expand...
Click to collapse
Did you try wiping data and cache for camera app?
Just as the title reads. Updates the fingerprint with cool animation.
Thanks for the information about the new firmware update for the new Bold-N1!
After comparing this new Bold-N1 with the BLU-XI+ (with 6GB of RAM), which I also have, I have noticed that apparently due to the low 4GB of internal RAM... That most negative and annoying thing when using this new BOLD-N1 is its bad management of it's RAM Memory, which BOLD should urgently solve in an upcoming update, because there are other similar phones with also 4GB of RAM that handle this memory much better when running several applications at the same time.
So I expected BOLD to do something to improve, the handling of the RAM in the BOLD-N1 ...
Apart of Updating the fingerprint with cool animations, Do you know if there any other fixes or enhancements?
I just wanted to add that it lost root with this update, but was able to flash my old modified boot image with no negative effects. I thought it might cause a boot loop, but it works fine.
im not currently on the stock rom, so i cannot do it. Has anyone managed to copy the update file, before it being installed?
Ok I asked and got a response. Here is the update package.
https://android.googleapis.com/pack.../404ed8bd09ac64e1c9a1252713be24abff463f81.zip
Possible warning
Not confirmed yet. But it is possible this update is changing the preloader , making sp-flash tool no longer connect without signed images.
Someone who has already installed the update, can you confirm if flash tool still allows flashing?
Fingerprint scanner activating on picking up the phone
Anyone know if there's a way to disable the fingerprint scanner activating any time I pick up the phone now? Never did that before the update, it's pretty annoying. Already have lift to wake turned off, but that doesn't fix it. Went through every setting and didn't see a way to fix it.
paulson64 said:
Anyone know if there's a way to disable the fingerprint scanner activating any time I pick up the phone now? Never did that before the update, it's pretty annoying. Already have lift to wake turned off, but that doesn't fix it. Went through every setting and didn't see a way to fix it.
Click to expand...
Click to collapse
Pretty sure that would be under the "lift to wake option" found in settings->Intelligent Assistance->Lift to wake
See if the switch is set on and toggle it off. Mine isn't and my scanner doesn't activate when picking up
no99sqrd said:
Pretty sure that would be under the "lift to wake option" found in settings->Intelligent Assistance->Lift to wake
See if the switch is set on and toggle it off. Mine isn't and my scanner doesn't activate when picking up
Click to expand...
Click to collapse
Nope, that isn't it. That's off now, and was off before the update, and this only started happening after the update.
paulson64 said:
Nope, that isn't it. That's off now, and was off before the update, and this only started happening after the update.
Click to expand...
Click to collapse
weird - I'm not having that problem
Apart of the Security Update and adding some cool Animations to the On-Screen Fingerprint Scanner...
I have also noticed that after the updating we are now able to turn ON or OFF Adaptive Brightness directly from the slide down menu.
paulson64 said:
Anyone know if there's a way to disable the fingerprint scanner activating any time I pick up the phone now? Never did that before the update, it's pretty annoying. Already have lift to wake turned off, but that doesn't fix it. Went through every setting and didn't see a way to fix it.
Click to expand...
Click to collapse
Please, anyone? This seems to really be killing my battery life, I'm getting down to 10 percent now, when before the update I would be down to about 40-50 percent with the same amount and time of use after this update.
I just updated my bold n1 with the new security patch and I don't know if this was available before hand, but I noticed that the fingerprint reader now appears on the bottom of the screen just by lifting the phone up. I don't remember it doing that before.
paulson64 said:
Please, anyone? This seems to really be killing my battery life, I'm getting down to 10 percent now, when before the update I would be down to about 40-50 percent with the same amount and time of use after this update.
Click to expand...
Click to collapse
lol so I've seen ur post and never understood what u were saying and this is for all of us for ignoring u sorry lol so to fix ur problem u actually have to press lift to wake to get ur phone the way u want it I just turned mine off for the first time and it acts like u describe in ur post soooo basically just turn the lift to wake option on but I actually like the way u have it no battery drain for me
hi, i have some problems with the stratos 3.
1. in ultra mode I only have a black screen, although pulse measurement lights up green. the latest firmware is on it and I have already reset the watch.
2. When jogging, the pulse measurement initially shows values that are much too high.
3. The update of the training load and vo2 max is always in the app only at 00:00.
Amazfit support no longer responds to inquiries
I am very frustrated with the watch
Lichter100 said:
1. in ultra mode I only have a black screen, although pulse measurement lights up green. the latest firmware is on it and I have already reset the watch.
Click to expand...
Click to collapse
Try this in your PC:
Code:
adb shell check_mcu_res_upgrade.sh
Saratoga79 said:
Try this in your PC:
Code:
adb shell check_mcu_res_upgrade.sh
Click to expand...
Click to collapse
it does not help. still black screen after switching to ultra mode
Lichter100 said:
it does not help. still black screen after switching to ultra mode
Click to expand...
Click to collapse
Look for the thread about Stratos 3 US firmware installer, in the post of 4.2.4.0 version there is a trick to update/fix Ultra Mode resources (MCU resources).
https://forum.xda-developers.com/showpost.php?p=81489033&postcount=8
Saratoga79 said:
Look for the thread about Stratos 3 US firmware installer, in the post of 4.2.4.0 version there is a trick to update/fix Ultra Mode resources (MCU resources).
https://forum.xda-developers.com/showpost.php?p=81489033&postcount=8
Click to expand...
Click to collapse
Hi, thank you for your work, but the watch is not found in ultra mode
try using the standard watchface before switching to ultra mode
Wesleyblanco said:
try using the standard watchface before switching to ultra mode
Click to expand...
Click to collapse
i have the standard watchface "quiet time" and a black screen in ultra mode
Lichter100 said:
Hi, thank you for your work, but the watch is not found in ultra mode
Click to expand...
Click to collapse
Both procedures I told you have to be done in Smart/Normal mode as you need adb working on your watch, and in Ultra mode adb doesn't work.
Hello all,
I am new at running and looking to get a sports watch to track my runs along with little smart features like showing notifications and controlling music from my phone.
I have short listed two watches according to my needs. Amazfit Stratos 3, price 299 SGD or Garmin Vivoactive 3 element, price 267 SGD.
I need accurate GPS and HR along with less buggy software on watch and app.
Need help in deciding one of these two.
Garmin works well and reliable GPS is a must.
Amazfit (I have a first Stratos) is always in developpement mode, GPS not really reliable (not bad but not reliable), HRM really bad, tracking features not very well, connected features almost the baddest possible.... Otherwise it is an usable watch
Saratoga79 said:
Both procedures I told you have to be done in Smart/Normal mode as you need adb working on your watch, and in Ultra mode adb doesn't work.
Click to expand...
Click to collapse
Hello, unfortunately that doesn't work either, still black screen
Hi, I need to change my Stratos 3 from Chinese to the International version but I can't find it here. Can you please help? Thanks a lot.
I have same problem for a while now. Watch is recognized in the app but screen on watch is blank. No one still have solution for this?
Crazy gone display
My time is going crazy after few minutes of workout... Anyone else? Cannot Complete any workout.
golic.uros said:
My time is going crazy after few minutes of workout... Anyone else? Cannot Complete any workout.
Click to expand...
Click to collapse
If it is with latest firmware 4.2.6.0 it's normal everyone is facing this.
Roll back to 4.2.5.0
After starting the ultra mode my stratos 3 does not show any sensor readings when entering the smartmode again.
firmware: 4.2.8.0
Tried reboot, reset, wiping with adb. Using different watch face, starting ultra again, switching back to smart... (several times) nothing helps.
When using hart rate function in smart mode, led flashing for a while, then stops, no reading.
No steps reading no gps reading.
Watch worked fine for 18 months before I used the ultra mode once (forgot my charger on vacation...)
Somebody any idea....?
Has anyone tried Android Auto on Realme GT??
Does it not work at all or do you get black screen and stutters?
If it's the latter, turn on 'keep display on while charging' option and it will stop doing that.
App is not crashing at all. But when i connect the usb cable to the car this appears.
Try installing the latest beta released 2 days ago. It allegedly fixed some car connections which have been broken.
Otherwise try getting global rom if possible.
Do you have a apk for the beta?
Do you have a photo of working android auto on global rom so i would not waste effort on converting chinese to global.
I got mine from apkmirror.
Is this global or Chinese version?
mucitel1 said:
PJI got mine from apkmirror. View attachment 5381009
Click to expand...
Click to collapse
mucitel1 said:
I got mine from apkmirror. View attachment 5381009
Click to expand...
Click to collapse
Got it working. Worth the Conversation For CN to Global.
Nice, so going from CN to Global ROM solved the problem? I'm on CN and Android Auto isn't working for me either - not sure if it's a head unit or phone issue at this point.
HoTsHoT89 said:
Nice, so going from CN to Global ROM solved the problem? I'm on CN and Android Auto isn't working for me either - not sure if it's a head unit or phone issue at this point.
Click to expand...
Click to collapse
Global version has its own issues too. It freezes if the screen is locked. You have to turn on keep screen on while charging option.
It's the CN rom. I've been there a couple of days ago. The android auto is totally usable on Global rom the head unit screen flickers sometimes but I'm sure android auto will fix that on there future updates.
mucitel1 said:
Global version has its own issues too. It freezes if the screen is locked. You have to turn on keep screen on while charging option.
Click to expand...
Click to collapse
Thanks. AA has been a real pain so far and the new beta didn't solve things either. I usually have my phone screen on when AA is on, but I'll hold off going to Global ROM for now.
Gien97 said:
It's the CN rom. I've been there a couple of days ago. The android auto is totally usable on Global rom the head unit screen flickers sometimes but I'm sure android auto will fix that on there future updates.
Click to expand...
Click to collapse
I have extreme flickers, to the point I could get an epilepsy looking at it. That is if it works at all, most of the time the head unit stays black completely and unresponsive to touches.
Gien97 said:
It's the CN rom. I've been there a couple of days ago. The android auto is totally usable on Global rom the head unit screen flickers sometimes but I'm sure android auto will fix that on there future updates.
Click to expand...
Click to collapse
Appreciate the feedback. Not sure what is causing the issue at this point for the CN ROM but so far I have no issues with anything else, just AA.
I'm not sure but i think its Baidu and Breeno. Because they wont let you use ok "Hey Google" function on the CN rom.
Try reaching Imacaber1 He converts CN to Global via TeamViewer idk if it's free.
Just an update - side loading the latest version of Android Auto now spits out an error where it says the app is not preinstalled.
I assume global ROM has AA right out of the box?
Global version has AA pre-installed yes.
Mine is working but had a roadblock that if phone got locked, car screen was frozen, got a tip and added my car as a trusted device and it resolved freezing issue. There is another option to turn off fingerprint icon display which may help too.
Realme Q3 Pro 5G also suffers from the same problem.