touchscreen has half not working, anyone has any solution tyo remote control the screen so i can acess the settings?
this Java app can be used to view and control watch via ADB only:
https://github.com/MajeurAndroid/Adb-Remote-Screen
I have the same problem, my right touch stopped working and I can't access the watch options or the last 2 weather information, you can try using adb command to reset the watch, in my case it is still not working. My watch is new and I have used it only for 1 week
I have exactly the same problem. Is this ROM related?
The right side of the touchscreen seems to be working on all other screens - I can for instance access the Compass and the Stopwatch that are also on the right side but on a different menu.
There's a youtube video showing the problem but I can't post because I'm newly registered. Just search for "Settings Button on Amazfit Stratos Not Working" on Youtube.
same problem
my stratos is with the same problem.
one solution would be to develop a ROM with the configuration button on the left side of the screen.
---------- Post added at 02:46 AM ---------- Previous post was at 02:34 AM ----------
lfom said:
this Java app can be used to view and control watch via ADB only:
Someone tried this?
Click to expand...
Click to collapse
New firmware update didn’t fix the problem for me ?
I tried installing different ROMs but nothing seems to work, i think that the problem is the touchscreen and not software related.
The only way to access the watch setting that i found is to enable the app list using the huami amazfit tool and then swipe at the end and select settings (which is written in chinese).
Since i have the watch bootloader unlocked, i'm not sure if you can enable the app list with the bootloader locked.
Hope it helps. :good:
Andreaji said:
I tried installing different ROMs but nothing seems to work, i think that the problem is the touchscreen and not software related.
The only way to access the watch setting that i found is to enable the app list using the huami amazfit tool and then swipe at the end and select settings (which is written in chinese).
Since i have the watch bootloader unlocked, i'm not sure if you can enable the app list with the bootloader locked.
Hope it helps. :good:
Click to expand...
Click to collapse
If you go all the way to the right and access the menu where you have the Compass and the Stopwatch, can you click on those? I can, and that's why I think it is software related but of course, I might be wrong
sribas said:
If you go all the way to the right and access the menu where you have the Compass and the Stopwatch, can you click on those? I can, and that's why I think it is software related but of course, I might be wrong
Click to expand...
Click to collapse
In my case it is hardware issue, the right touch is not working in any others screen.
You can check the touchscreen response by activating the hidden mode Lab and then enable the pointer location. If i touch the left part it appears the pointer and all the movement that i do, if i try to touch the right part nothing happens, it's dead, hardware issue
I have the same issue. But with latest international firmware 2.3.5.0. Did you solve it? What did Amazfit support say?
Something weird. After some useless rebooting and using the ADB remote screen I can now use the lower right part of the touchscreen again. However now sometimes the widgets just jumping forth and back.
Hey,
I have the same problem.
app control
Andreaji said:
I tried installing different ROMs but nothing seems to work, i think that the problem is the touchscreen and not software related.
The only way to access the watch setting that i found is to enable the app list using the huami amazfit tool and then swipe at the end and select settings (which is written in chinese).
Since i have the watch bootloader unlocked, i'm not sure if you can enable the app list with the bootloader locked.
Hope it helps. :good:
Click to expand...
Click to collapse
This app is for Android?
Do you can access settings wifi, time format, ....?
Just use ADB remote screen for this.
Please help, is this above described mostly unresponsive touchscreen (setting icon) a software problem or a hardware problem? I cannot try out because I do not want to loose warranty while flashing back or to the latest chinese beta. I just have recognized it since 2.3.5.0. Thanks!
I did not rinse the watch with water for some days because I did not do workouts with it. Now the touch screen is working more and more again. There is still a dead spot in the middle which makes swiping down the quick settings menu a bit difficult but the settings and brightness icons are now working again. I guess there is water within the watch causing this. Maybe the watch is not as swimmprove as advertised. I just did one pool while taking care of kids. Nothing more. Since it is a swimming watch, water is probably not coming out of it's own.
Good news, I'll trying.
I'll trying good luck for us.
SteffenBerlin said:
I did not rinse the watch with water for some days because I did not do workouts with it. Now the touch screen is working more and more again. There is still a dead spot in the middle which makes swiping down the quick settings menu a bit difficult but the settings and brightness icons are now working again. I guess there is water within the watch causing this. Maybe the watch is not as swimmprove as advertised. I just did one pool while taking care of kids. Nothing more. Since it is a swimming watch, water is probably not coming out of it's own.
Click to expand...
Click to collapse
Guys, do you know if that screenshot off the hardware menu of stratos is normal?
I just bought it. First thing as soon as I paired it, it was to upgrade at 2.6.3.1
As I was checking out I noticed that on "Stopwatch" I couldn't press the reset/lap button whatever I tried.
Also at "Timer" I couldn't press the stop button or couldn't select the minutes on previews screen.
It seem to me that the lower left corner off the touchscreen isn't responding.
Does my finding on hardware menu (picture) confirms that?
left corner
P.S. : None intervention was made at the watch. Only upgrading.
I restored to factory settings 3 times and the problem remains.
nutrialex said:
Guys, do you know if that screenshot off the hardware menu of stratos is normal?
....
Click to expand...
Click to collapse
If you clean it very well and the problem persists, then probably the digitizer (touchscreen) is damaged.
I just got my Stratos back from repair. They apparently replaced the touchscreen. But I don't know if it was caused by water entering the device or just a crappy screen. But now it is working fine.
Related
Hi all,
This is my first thread... I've looked every forum, every existing thread looking for an explanation / solution, with no luck at all... I hope somebody has experienced this with its prime and found a solution, because I'm thinking in RMA it...
The thing is that my sensors stopped working! No accelerometer, no magnetometer. The screen rotates itself to portrait mode when an app asks for it, but it stays that way when exiting the app. I have to go to Settings -> Display to uncheck and check Autorotation to go back to landscape mode. This is annoying! I installed an app called Elixir 2 and in the sensors page only the microphone is listed as present. Every other sensor is displayed as not present.
I noticed it two weeks ago, but I wanted to look for a solution instead of getting it replaced. I think it came with a .15 and it was updated to .21 in the first connection to Internet. I waited for the .28 to be released just in case it fixed the problem, but it did nothing, still has the problem.
By the way, I tried a cold boot and a factory reset... still nothing.
If I can have any word from anyone I will be pleased!
Thank you!
PS: forgive my english, I'm from Spain
Get the app called elixir2. its free. Kirk show u detailed info on everything, including sensors. itll show real time info on them. allows u to cut them off n on or reset them. it might help.
demandarin said:
Get the app called elixir2. its free. Kirk show u detailed info on everything, including sensors. itll show real time info on them. allows u to cut them off n on or reset them. it might help.
Click to expand...
Click to collapse
Well, that's exactly what I did! I said it before It just shows an X beside every sensor and under them it says something like "not present" (I don't have the Prime here right now). In that sensors page the only one that is shown as working is the microphone.
Any idea?
Thank you anyway!
demandarin said:
Get the app called elixir2. its free. Kirk show u detailed info on everything, including sensors. itll show real time info on them. allows u to cut them off n on or reset them. it might help.
Click to expand...
Click to collapse
Here's a snapshot of the Elixir2 sensors' page.
Hi, I cannot suggest anything new to try.
Today I noticed some of my sensors were not working, tried playing Riptide and found I could not turn. Also tried a level app and found that the orientation was not being detected. My problem was fixed by powering off then turning on again. I did not try elixir2 before the power off, therefore could not say if my prime was in a similar state.
Good luck in getting your prime going again.
Cheers stv
Sent from my Transformer Prime TF201 using XDA
stvlgm said:
Hi, I cannot suggest anything new to try.
Today I noticed some of my sensors were not working, tried playing Riptide and found I could not turn. Also tried a level app and found that the orientation was not being detected. My problem was fixed by powering off then turning on again. I did not try elixir2 before the power off, therefore could not say if my prime was in a similar state.
Good luck in getting your prime going again.
Cheers stv
Sent from my Transformer Prime TF201 using XDA
Click to expand...
Click to collapse
Well, at least someone experienced the same... even with a reset I can't make it work. Is there any "ultra-reset" I can do?
Before .28 I get the same issue.
Sensor can restart after a reboot or a cold start, but after I plug on the dock or after a deep sleep,the sensor stop.
Sometime, after a restart the sensor was not recognized. I use elixir also to check.
Now with .28, the sensor work well.
DesmoRFR said:
Before .28 I get the same issue.
Sensor can restart after a reboot or a cold start, but after I plug on the dock or after a deep sleep,the sensor stop.
Sometime, after a restart the sensor was not recognized. I use elixir also to check.
Now with .28, the sensor work well.
Click to expand...
Click to collapse
Did you update to .28 over wifi or using a microSD?
Thank you!
Update done through Microsd.
I have tweaked buil.prop on .21 and result Fota didn't work.
Think also to make a cold reboot and clear cache of all application (can be done with elixir).
demandarin said:
Get the app called elixir2. its free. Kirk show u detailed info on everything, including sensors. itll show real time info on them. allows u to cut them off n on or reset them. it might help.
Click to expand...
Click to collapse
demandrin - off topic, do you know where I may be able to get the circiut board that has the microsd slot and the touch screen sensor connectors. I accidentally damaged the connectors and now I can only use the tablet with the keyboard dock as a mini laptop. I emailed Asus but they would not sell me the part. I wonder if Gary would be nice enough to sell me the part.
Is HP the only company that sells parts to customers (I love HP for that reason LOL!!)
DesmoRFR said:
Before .28 I get the same issue.
Sensor can restart after a reboot or a cold start, but after I plug on the dock or after a deep sleep,the sensor stop.
Sometime, after a restart the sensor was not recognized. I use elixir also to check.
Now with .28, the sensor work well.
Click to expand...
Click to collapse
An update with my problem: I finally installed the .28 through SD card, having wiped all the data first, and the result is the same: no sensors are present. No autorotation, no compass, no auto-brightness. Elixir shows only the microphone as one of the sensors, everything else is shown as "not available" (as shown on my previous snapshot).
Any help?
Thank you!
sunne2k said:
An update with my problem: I finally installed the .28 through SD card, having wiped all the data first, and the result is the same: no sensors are present. No autorotation, no compass, no auto-brightness. Elixir shows only the microphone as one of the sensors, everything else is shown as "not available" (as shown on my previous snapshot).
Any help?
Thank you!
Click to expand...
Click to collapse
And yesterday, with no reason at all, ALL of my sensors (accels, gyro, magnet field, etc.) started working again. I just powered the tablet on and voilà, everything was perfect! Elixir showed all the sensors up and running!
I think this post can be closed now... I hope it doesn't happen again!
2 days ago my Camera app stopped working either through the hardware button or software all it does is play the opening app animation and return back to the previous screen. Ive tried soft and hard resets of the phone and now ive even reflashed it via NCS to no avail. Now at this point youd think it would be a hardware thing, but apps like "panorama" and "smart shoot" still work and so do all the other camera apps ive downloaded. Anyone managed to fix this?
You seem to be the only one whom has had this issue and reported it. So no, no fix as of now since you are alone on this one.
same here
Jt612 said:
2 days ago my Camera app stopped working either through the hardware button or software all it does is play the opening app animation and return back to the previous screen. Ive tried soft and hard resets of the phone and now ive even reflashed it via NCS to no avail. Now at this point youd think it would be a hardware thing, but apps like "panorama" and "smart shoot" still work and so do all the other camera apps ive downloaded. Anyone managed to fix this?
Click to expand...
Click to collapse
same thing happened to my phone since yesterday and I've tried hard reset but nothing changes.. Camera only works through smartshoot and if I try to open it just using the original app, or use the camera button, it just won't open and turn back to the home screen
576514545 said:
same thing happened to my phone since yesterday and I've tried hard reset but nothing changes.. Camera only works through smartshoot and if I try to open it just using the original app, or use the camera button, it just won't open and turn back to the home screen
Click to expand...
Click to collapse
I have exactly the same problem. After 5 days of perfect use of everything, the phone overheated, drained completely within a couple of hours and now it has a permanent problem with the camera: either black screen when launching the camera app, or if it launches, pink stripes and frozen app after 10-15 seconds. It cannot be just a random problem on one device. I've seen the same description of the problem on various forums.
Has Nokia responded on this?
The funny thing is that I live in Greece, the device was bought during a trip abroad and it's not covered by warranty! Regarding Nokia's amazing support policy I have written details at my blog nextbeta.com.
(I'm not a smartphone user that cannot understand what is a bug and what is a hardware problem, 8 years MVP for Mobile Devices and founder of the Greek Mobillity Club in 2001...)
Have you flashed the newest ROM or an older version? Perhaps you might want to try it with the Release ROM to see if that fixes things. Aside from that I fear your only option is to turn it in at a service center and let them figure out what is wrong.
Given that the Flash rewrites the whole system it somehow has to be connected with the hardware.
Noom doesn't update when the screen is off, and i assume others will be the same. Is there any app that is able to do this?
I assume that when the screen is off, all sensors go to sleep too
jeremy.chan said:
Noom doesn't update when the screen is off, and i assume others will be the same. Is there any app that is able to do this?
I assume that when the screen is off, all sensors go to sleep too
Click to expand...
Click to collapse
I have used Runtastic Pro and Runtastic Pedometer, and both have the same issue. They have a setting to keep the screen on while running.
Have you been playing with the "Smart mode" setting, set to Sports Mode (can be found within settings). With Endomomdo, I once achieved what we are trying to accomplish, but only once: screen of, pedometer counting as expected.
Maybe trying different scenarios might get us closer to a solution?
google mytracks works
I have a US 1/8 running 5/27 firmware with OTA update. Smart Mode = Normal
My tracks seems work fine even after the screen does off. I am getting very accurate maps of my walks.
is this smart mode setting only on the newest firmware? im running the bt rom from a lil while ago and dont see the option.
Maybe
dragonfly1113 said:
is this smart mode setting only on the newest firmware? im running the bt rom from a lil while ago and dont see the option.
Click to expand...
Click to collapse
I just got my watch in late July. It came with the 5/27 firmware. I have not seen/used any other version but from what I have read here it is something new just not sure how new. I know that I am not having the issues mentioned by those who got watches early so maybe it was worth the wait.
On that note I asked for a full breakdown of the modes and what they do and got not response. Not sure anyone has it figured out yet and if omate does that have not shared that info anyplace I have found.
May problem now!
After the last automatic update 2.3.7.0. original ROM, after a few km of activity, the activity stops, then start a new activity with no GPS information, very strange!
Has done this almost every time I go to train.
I already tried to deactivate all the alerts, pause, 3D data, but it remains the same. I'm getting mad.
How can I go back to the previous version or solve this? thank you
Pair watch again but do note restore old data to watch. If it doesn't fix the issue (keep all alerts and auto-pause off), then we will have to wait for an update... Many users reported the same issue.
ok, thanks
NENOmart said:
ok, thanks
Click to expand...
Click to collapse
Did it work?
I have the same problem. I did the procedure of unpair, pair again without restoring old data and didn't work.
I sent a ticket to xiaomi describing with details all the issues during the last weeks. They asked me for a video where they could see the problem. I sent it. They asked me to do a battery test. I did it and was ok. Then they asked me if I had gone to a spa with the clock. I replied that I had only swum with him at sea. And the last thing that they have answered me is that the clock can not measure the RH in the water and that if I have any problem I explain the details to them !!!
Well, I had never asked about the pulse rate in water since the problems I detected are in running mode, walking and tennis and I had already sent several emails explaining all the problems in detail, the video, the tests...
I asked him to change the support person because I think it's a lack of attention and I'm waiting for an answer for 6 days
To be continue...
The solution is easy.
Reset and not make restore. Then turn off ALL notifications during the race and DO NOT TOUCH ANY BUTTON DURING EXERCISE until a new update comes out.
Work perfecly for me.
Just a question. Im new with the Verge. Im on a rooted OP3 with native OxygenOS.
The app dosent sync the HR. If i open the app the step will be synced (most times) but the HR is empty. I messure continius.
Regards
Hmmm. With the continious Setup the green LEDs in the back are not lighten up. Only manual messure are working.
It seems fixed with version 2.3.8
Hi, I got my Mi 3 this week. I noticed some weird behavior from my magnetometer and Accelerometer, wondering if anybody else is experiencing the same. After a day of use, sensors go haywire and suddenly stop reporting data. Can't use compass and my auto rotate stops working. I tried different apps to see if it's a global problem or just a not compatible app, so far when sensors go blank, the effect is global. Even the Mi self test is not reading anything from the sensors. Pedometer is on the other hand operational tho.
Things come back to normal after a restart. I suspect it must be a software bug maybe?
sherlock.holmes said:
Hi, I got my Mi 3 this week. I noticed some weird behavior from my magnetometer and Accelerometer, wondering if anybody else is experiencing the same. After a day of use, sensors go haywire and suddenly stop reporting data. Can't use compass and my auto rotate stops working. I tried different apps to see if it's a global problem or just a not compatible app, so far when sensors go blank, the effect is global. Even the Mi self test is not reading anything from the sensors. Pedometer is on the other hand operational tho.
Click to expand...
Click to collapse
My sensors are working but they are wrongly calibrated :/ and pedometer isn't working! I thought the pedometer was disactivated by default...
greenpays said:
My sensors are working but they are wrongly calibrated :/ and pedometer isn't working! I thought the pedometer was disactivated by default...
Click to expand...
Click to collapse
Dial *#*#6484#*#* it's the built-in test. U can recalibrate your accelerometer there and also test the device. Use power button to exit. And for +-45 test's of the accelerometer tilt your device on it's corners.
sherlock.holmes said:
Dial *#*#6484#*#* it's the built-in test. U can recalibrate your accelerometer there and also test the device. Use power button to exit. And for +-45 test's of the accelerometer tilt your device on it's corners.
Click to expand...
Click to collapse
Thanks for the tip it works perfectly!
By the way, you are using European firmware or Global, because for me the pedometer isn't counting the steps :/
greenpays said:
Thanks for the tip it works perfectly!
By the way, you are using European firmware or Global, because for me the pedometer isn't counting the steps :/
Click to expand...
Click to collapse
I'm glad to hear it worked for you. My pedometer comes and goes... Not reliable unfortunately. btw how can I check my ROM region? Got the October patch, It doesn't solve the bug...
I also have problems with my vibrator. It doesn't react to short vibrations (that much I can make out of it).
sherlock.holmes said:
I'm glad to hear it worked for you. My pedometer comes and goes... Not reliable unfortunately. btw how can I check my ROM region? Got the October patch, It doesn't solve the bug...
I also have problems with my vibrator. It doesn't react to short vibrations (that much I can make out of it).
Click to expand...
Click to collapse
Well I seem to have the global version. MIXM
I hope they get problems solved fast.
If anybody else with the device is reading this post, can you please check your sensors with an appropriate app and see if yours is also malfunctioning randomly?
I had this problem, but I just restarted the device and everything came back normal
braulio_holtz said:
I had this problem, but I just restarted the device and everything came back normal
Click to expand...
Click to collapse
Yes! It goes away with restarting (and sometimes doesn't!!!)
But it's just a temporary fix, in matter of hours, you r back to the square one.
sherlock.holmes said:
I'm glad to hear it worked for you. My pedometer comes and goes... Not reliable unfortunately. btw how can I check my ROM region? Got the October patch, It doesn't solve the bug...
I also have problems with my vibrator. It doesn't react to short vibrations (that much I can make out of it).
Click to expand...
Click to collapse
Go to Accessibility settings and turn on Touch Vibration. Keeping it off also hinders the in call volume function. Hope it helps
Arkapravoarka said:
Go to Accessibility settings and turn on Touch Vibration. Keeping it off also hinders the in call volume function. Hope it helps
Click to expand...
Click to collapse
Well yeah, it did work actually. But the thing is, I don't like to have the touch vibrations on always, I just want it to work with G-board and some other apps that use short vibrations as a feedback...
It's like the touch vibrations setting, controls everything lol.
It's definitely a bug they have to get fixed.
So it turns out the sensor problem that I reported is being caused by the G-cam port I had installed. The solution is to close the app (in the multitasking menu !?) Whenever you are done using it.
Flash the stock rom again and your problem will be solved for sure, also faced the same issue.
I have same issue and flash stock rom but still not working how can i fix it ?
I also have a problem with compass apps. north and south are correct shown, west and east are not correct.
Stefan_1 said:
I also have a problem with compass apps. north and south are correct shown, west and east are not correct.
Click to expand...
Click to collapse
I use this solution and it worked.
https://forum.xda-developers.com/showpost.php?p=82161897&postcount=4
My Mi A3 has just got an system update of android 10. Just after that, my camera isn't working. Please help me out of this problem.
Chaitanya123 said:
My Mi A3 has just got an system update of android 10. Just after that, my camera isn't working. Please help me out of this problem.
Click to expand...
Click to collapse
Did you try wiping data and cache for camera app?