After flashing s5830i this trouble happened. Phone with inserted SIM is not looking for service provider.
But if you activate the offline mode, then turn off and quickly go to search for networks, the networks are.
When choosing any operator message appears "Your sim card does not allow a connection to this network".
If you turn on the phone without sim, networks are also no problem. Already tried all that is possible, different stock firmware.
Imei ok, phone is not locked. Prompt in what could be the problem. Log radio attached. View attachment radio.rar
lesikvip said:
After flashing s5830i this trouble happened. Phone with inserted SIM is not looking for service provider.
But if you activate the offline mode, then turn off and quickly go to search for networks, the networks are.
When choosing any operator message appears "Your sim card does not allow a connection to this network".
If you turn on the phone without sim, networks are also no problem. Already tried all that is possible, different stock firmware.
Imei ok, phone is not locked. Prompt in what could be the problem. Log radio attached. View attachment 2845968
Click to expand...
Click to collapse
maybe you choose the wrong network '
try to " Select automatically "
or use GALAXY TOOLBOX ..
hearthrob07 said:
maybe you choose the wrong network '
try to " Select automatically "
or use GALAXY TOOLBOX ..
Click to expand...
Click to collapse
"Select automatically" does not solve my problem. GALAXY TOOLBOX not supported, established a similar application GalaxSim Unlock, locks were not found.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Jus flash a new modem. Also be sure that your stock rom have support for that baseband in your country,
lesikvip said:
"Select automatically" does not solve my problem. GALAXY TOOLBOX not supported, established a similar application GalaxSim Unlock, locks were not found.
Click to expand...
Click to collapse
Can you make sure the SIM is working alright? Do post the result.
mahithm said:
Can you make sure the SIM is working alright? Do post the result.
Click to expand...
Click to collapse
Reasons unknown to me were blocked my 4 sim cards, and one does not read because of the fact that apparently too old. During this time, flashed about 15 different drivers, and so many versions of modems that does not resolve the problem. As it turned out simple Thank you very much mahithm, for the help. :good::cyclops:
Dear moderators, problem solved. Topic can be closed, thanks.
lesikvip said:
Thank you very much mahithm, for the help. :good::cyclops:.
Click to expand...
Click to collapse
Glad I could help buddy
Related
Hi dudes!
Somebody has been tested some ROM CM10, AOKP, or AOSP-based, Example: RootBox v3.x or major, and know how do appear the STK (SIMToolKit) in drawer apps and that it work!... and additionally share your experience for I can do in my smartphone (SGS 3).
Thanks and Cheers!
Click to expand...
Click to collapse
Hi everyone,
I reading many things on internet, and I found that this bug was inyected for jelly bean update 4.2, see Issue 40661.
Here I describe the solution, it work fine for me on RootBox v4.1 !!!
Steps:
1. Ensure that Stk.apk is in '/System/app' path, and that it has permission correct ( rw--r--r--)
2. Take a moment for determine and ensure the PUK code of your SIM card.
3. Set your phone in airplane mode.
4. Enable Sim pin lock in Settings --> Security --> Set up SIM card lock --> Check: Lock SIM card (try 3 times until to lock your phone).
5. Set your PUK code and here set the new sim lock code 2 times.
6. Reboot your phone.
7. When phone start up, turn off airplane mode and wait that appear carriers label (That your phone have signal).
8. In your app drawer must be Sim Toolkit.
Sreenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks a lot!
Ok guy. In order to stop your annoying spam attacks in all AOSP threads I gonna tell you this:
Use temasek's Rom. I have the STK, I can use it, I have it in my drawer, and I want you to stop spamming NOW!
http://forum.xda-developers.com/showthread.php?t=1797109
And keep in mind, asking the same thing again and again instead of trying out yourself is very, very rude.
Nevertheless, I hope I resolved your problem.
ulixess said:
Use temasek's Rom.
Click to expand...
Click to collapse
Don't, that ROM sucks!
See that? That right there is why you don't ask what ROM to use - everybody has different opinions. Try them yourself
I know, we all know.
He asked for a Rom which includes STK. Temasek's does, for sure and tested by me.
He does not want to know the "best rom" at any point. And I confirm his loved STK is in the mentioned Rom.
ulixess said:
I know, we all know.
He asked for a Rom which includes STK. Temasek's does, for sure and tested by me.
He does not want to know the "best rom" at any point. And I confirm his loved STK is in the mentioned Rom.
Click to expand...
Click to collapse
Hey men... thanks for answer me!!
Sent from my GT-I9300 using Tapatalk 2
Hi guys.. Looks like the oxygen Os 2.1.2 doesn't support the pop up message which comes after we end the call, which shows our mobile main balance or data bal.
Anyone facing the same? Pls help how to enable this...
I've actually never seen this on another phone.
Isn't this just some feature for another brand that they introduced themselves ?
I just lost my 100RS balance as I didn't know that my Net offer had expired. USSD is not working with !dea in Kerala, India
Yes USSD not working.....
Can someone find out a solution to this
USSD works fine here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
dagger said:
USSD works fine here.
View attachment 3537198
Click to expand...
Click to collapse
No, It is not working for me yet.
Same issue here. No idea why though
for me it's working fine as well, it might be a problem with your network operator, sendin the codes a different way or with a different method
You might try wiping data and cache after and if you updated to 2.1.2.
I read somewhere that it solves many problems.
First unlock developer mode, turn on advanced reboot and reboot to recovery.
For me the USSD works.
ravi847 said:
You might try wiping data and cache after and if you updated to 2.1.2.
I read somewhere that it solves many problems.
First unlock developer mode, turn on advanced reboot and reboot to recovery.
For me the USSD works.
Click to expand...
Click to collapse
hi
mine is just a few days old and the USSD codes is not working i do remember an app for this on the store may be ill use it for now but the code is not Woking and i got mine just 2 days back
USSD not working...
Can someone find out solution.
I read it on oneplus forum that they are working on this. Its not general issue, happening for some particular networks. In India, mostly with Airtel.
saurabh40629 said:
I read it on oneplus forum that they are working on this. Its not general issue, happening for some particular networks. In India, mostly with Airtel.
Click to expand...
Click to collapse
absolutely true
i use airtel and cannot see the messages :3
It's not working. I have airtel original nano Sim one plus x
not working here too... using airtel..
Hey Guys,
There is one planned update in early january, hope that fixes the problem.
saurabh40629 said:
Hey Guys,
There is one planned update in early january, hope that fixes the problem.
Click to expand...
Click to collapse
Where did you get that info?
Link please.
Calvin2394 said:
Where did you get that info?
Link please.
Click to expand...
Click to collapse
It was in oneplus forum. Here you go.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi,
I am using CM13 Nightly 13.0-20160618 with Boeffla Kernal. Facing the zero network issue on both my sims. My phone will not get network without rebooting the phone. Even airplane mode would not fix the issue. I observed that this issue happens when there is a MMS on my phone to be retrieved and just after that the signals gets lost and wont come back until the reboot. Anybody facing such issue.
Thanks
Flashed latest unofficial cm13 update and also got no network, also my sim just gets ignored. Couldn't find a fix so far. It seems iemi or efs folder are corrupt
tausifahmed said:
Hi,
I am using CM13 Nightly 13.0-20160618 with Boeffla Kernal. Facing the zero network issue on both my sims. My phone will not get network without rebooting the phone. Even airplane mode would not fix the issue. I observed that this issue happens when there is a MMS on my phone to be retrieved and just after that the signals gets lost and wont come back until the reboot. Anybody facing such issue.
Thanks
Click to expand...
Click to collapse
Word on the street is you just restore efs from your OOS backup, probably from any backup I imagine.
Tried this ?
Also try what @Exodusche above mentioned.
PS - Wallpaper please ?
Joshwin Aranha said:
Tried this ?
Also try what @Exodusche above mentioned.
PS - Wallpaper please ?
Click to expand...
Click to collapse
You can get the wallpaper here: https://play.google.com/store/apps/details?id=com.hashcode.walloid&hl=en
tausifahmed said:
You can get the wallpaper here: https://play.google.com/store/apps/details?id=com.hashcode.walloid&hl=en
Click to expand...
Click to collapse
Thanks man.
My wife has a similar problem to this regardless of what ROM she uses, whether its stock OOS or CM based.
It only happens with her SIM on the Three network, you might reboot the phone and there'll be absolutely no signal, then it might just kick back in after an hour and be absolutely fine then until the next reboot. Stick another carrier SIM in like Vodafone and it is absolutely fine, stick a SIM in either slot and Vodafone will be fine but the Three SIM will do the same thing. Don't think its a hardware fault as would expect to see the same issue with other SIM's at the same time. She had her SIM replaced and it made no difference. Three won't help any further because the phone isn't supplied by them.
I think its some sort of modem software bug but I'm not sure. If i put my Three SIM in as well it does the same, if I put her SIM in my phone it works no problem!
I've been trying to root my phone but it went wrong, a friend has been trying to help fix it however we ran into a problem.
I have the stock firmware but when I put them all in their places it fails
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
However if I uncheck BL it goes through and my phone is back to normal but, and i'm not sure if this problem is because of this but my phone doesn't detect my sim card.
Any help would be appreciated, thanks.
LucasSmith02 said:
I've been trying to root my phone but it went wrong, a friend has been trying to help fix it however we ran into a problem.
I have the stock firmware but when I put them all in their places it fails
However if I uncheck BL it goes through and my phone is back to normal but, and i'm not sure if this problem is because of this but my phone doesn't detect my sim card.
Any help would be appreciated, thanks.
Click to expand...
Click to collapse
Generally, it happens after flashing.
It might be a imei problem.
Check out this link:
http://naijaknowhow.com.ng/how-to-change-imei-of-all-mtk-android-devices/
Augustoandro said:
Generally, it happens after flashing.
It might be a imei problem.
Check out this link:
Click to expand...
Click to collapse
Sorry the unrooted method did not work for me. But do you have any idea on why BL is the file that fails the flash
What’s does it say when you insert your sim..is NO SIM CARD OR INVALID SIM OR EMERGENCY CALL ONLY...which of them
Sent from my iPhone using Tapatalk
LucasSmith02 said:
Sorry the unrooted method did not work for me. But do you have any idea on why BL is the file that fails the flash
Click to expand...
Click to collapse
I have no idea about this one
successnbd said:
What’s does it say when you insert your sim..is NO SIM CARD OR INVALID SIM OR EMERGENCY CALL ONLY...which of them
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
When I insert the sim it says nothing, but when I try turn mobile data on it says Insert SIM card Insert SIM card to access network
Also I always have this in my status
Navigate to About in settings let me see details there
ok
Hi
I want to receive/send calls through the LTE (4G), my carrier support it, i have the 4G+ in my statubar.
In the network settings, i don't have the VolTe switch, so i have do a chat with the carrier assistance, no problem for them.
I have also contact the OnePlus support chat, they make me switching my SIM card from the first slot to the second one + reboot but the problem is still here, they make me wipe the cache and wype networks settings, same result.
I have check on the web, and i get this: https://www.phonandroid.com/forum/t...-et-volte-sur-oneplus-6-7-8-sans-root.206649/
(XDA equivalent: https://forum.xda-developers.com/t/guide-activate-volte-and-vowifi-simple-and-clear.4116051/)
But when i connect my device, the driver in my devmgmt.msc isn't good, it say that the driver for this device is not installed but i have install "QPST_2.7.460" and "QUD.WIN.1.1+Installer-10037.3+Setup" with administrator access.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anyone would have an idea ?
Thanks in advance.
What does *#*#4636#*#* -> phone info say?
Mine looks like this :
Spoiler: Screenshot
Volte working as indicated in statusbar
andreas__ said:
What does *#*#4636#*#* -> phone info say?
Mine looks like this :
Spoiler: Screenshot
View attachment 5180707
Volte working as indicated in statusbar
Click to expand...
Click to collapse
It show me this:
Weird there is no telephone number.
In the three dots menu there is IMS service status and there it should say registered in first line.
I'm on 10.5.8 89 ROM (NA) by the way
EDIT: installing the driver the xda thread says
2. Install Qualcomm QPST Diag port x64 / QPST 2.7.474 software on your computer (links below)
Important: there should be no other Qualcomm drivers on the computer, disable them, otherwise error messages will appear!
Click to expand...
Click to collapse
However, I did not do that modification myself but it seems to be a good option as your carrier is mentioned explicitely.
andreas__ said:
Weird there is no telephone number.
In the three dots menu there is IMS service status and there it should say registered in first line.
Click to expand...
Click to collapse
So effectivly i have this first problem bcz in my IMS statut service i get that:
Translation: Non enregistré => Unregistred
Indisponible => Unavailable
Disponible => Available
I'm on 10.5.8 89 ROM (NA) by the way
Click to expand...
Click to collapse
I have the same version (the last one)
EDIT: installing the driver the xda thread says
However, I did not do that modification myself but it seems to be a good option as your carrier is mentioned explicitely.
Click to expand...
Click to collapse
I think I'm going to have to find out if I have a driver from the Qualcomm manufacturer already installed somewhere in my computer and remove it while I'm working on it.