Extra protection for your apps
With this app you could protect app with a password, PIN or pattern. The Android lockscreen is used for that. The protection could not be removed with a simple long press on back-button, like with most other apps. You could even protect not straight startable apps eg the package-installer.
Donation: You could select a unlimited count of apps.
TouchWiz users (most Samsung devices): Please enable in settings the compat mode BEFORE reboot the device with enabled module!
Features:
All features are supported since Android 4.2. With older versions not supported options are hidden in the settings.
Different observation modes: First start of apps or while using it
Duration of unlock time configurable
Autmatic locking could be switched off.
Notification options: Always, while unlocked, never
Duration of unlock could be configured
Pre-lock slider could be disabled for app unlocking
Minimal and maximal time frame of unlocking configurable
Examples:
The device is protected by slider, protected apps with a PIN
The device is protected by slider and PIN+TimePIN, protected apps with pattern
Or you could use custom unlock mehtods without the keyguard:
Crash report
Knock Code
Pattern
PIN
Password
Recommendation:
For extreme protection select these apps:
Play Store (install/remove apps)
Xposed Installer (enable/disable modules)
Package-Installer (install/remove apks)
Settings (Android system settings)
ProtectedApps (configure protected apps)
WARNING: Please configure and check ProtectedApps with other apps before!
Coloring:
YELLOW: System app, could be started by launcher.
YELLOW+BLUE: System app, not straight startable.
BLUE: User app, not straight startable.
Donator:
No self-promotion in the app.
More than 5 apps could be selected.
You support this app and further development!
Permissions:
DEVICE_ADMIN: Lock device (required)
BOOT_COMPLETE: Show persistent notification (optional)
Modules reported not correct working with this app:
DS Battery saver
Lockscreen disabler
This app does not connect itself to any websites or hosts!
Important:
This app needs the Xposed Framework. The framework requires root access for installation. Don't forget to enable the module in Xposed. You can grab it here: Xposed Installer
Website: http://tinyurl.com/lfw2pdu
Play Store: http://tinyurl.com/lp4fn99
Xposed Repository: http://tinyurl.com/oxdejr9
Changelog: http://tinyurl.com/of6gvex
Why this app? Killing "protection" by long touch on back button could be optimized
Translation:
You could find here a interface to translate the english strings: http://tinyurl.com/okycacj
A free account of www.oneskyapp.com is required to edit. Additional, please attach your email address or send it via PM
waited along for this... Awesome...!!!
NeroD said:
waited along for this... Awesome...!!!
Click to expand...
Click to collapse
I hope you like it, it's the way i think its easy to protect apps
@badkill @pesiran @RBDoMGaM @supergonkas @pugsang @undaclazz
Maybe you want translate it
defim said:
I hope you like it, it's the way i think its easy to protect apps
@badkill @pesiran @RBDoMGaM @supergonkas @pugsang @undaclazz
Maybe you want translate it
Click to expand...
Click to collapse
Done for Portuguese (europeu)
mauam said:
Done for Portuguese (europeu)
Click to expand...
Click to collapse
Thanks, attached an apk with translations. Pleas PM me your email
Bootloops galaxy s5 stock
Sent from my SM-G900T using XDA Premium 4 mobile app
Good Job...
But have a problem , for relock app's must pulldown status bar and touch notification of your app till lock apps...
pls add options for relouck app when close app,..
Great app
Even though it might compromise security, could you add an option to disable locking while in home Wi-Fi net (or BT etc)? Or add a Tasker shortcut to do so?
Thanks a lot!
chw9999 said:
Great app
Even though it might compromise security, could you add an option to disable locking while in home Wi-Fi net (or BT etc)? Or add a Tasker shortcut to do so?
Click to expand...
Click to collapse
I think Tasker Support is better, so could many events beused. What about that: PA accept a broadcast, it contains
1) "mode" extra: protect apps, unlock forever and maybe unlock apps for the duration set in settings
2) "password" extra: In the settings could be a password defined and tasker has to add it to the broadcast. So not every app could send a broadcast.
ahrion said:
Bootloops galaxy s5 stock
Click to expand...
Click to collapse
Can you attach a logcat and logfile of Xposed?
Farshid-Iran said:
Good Job...
But have a problem , for relock app's must pulldown status bar and touch notification of your app till lock apps...
pls add options for relouck app when close app,..
Click to expand...
Click to collapse
That's not so easy, android does not "closes" apps, it "pauses" them. Eg if you hit HOME button while an app is open it is paused. Therefore is in the menu of PA an "exit" item.
You could get ~~ what you want if you set the oservation method to "create" and the unlocked time to it's minimum (its 30 atm)
defim said:
I hope you like it, it's the way i think its easy to protect apps
@badkill @pesiran @RBDoMGaM @supergonkas @pugsang @undaclazz
Maybe you want translate it
Click to expand...
Click to collapse
Spanish translation is complete, thanks for another great module :good:
defim said:
I think Tasker Support is better, so could many events beused. What about that: PA accept a broadcast, it contains
1) "mode" extra: protect apps, unlock forever and maybe unlock apps for the duration set in settings
2) "password" extra: In the settings could be a password defined and tasker has to add it to the broadcast. So not every app could send a broadcast.
Click to expand...
Click to collapse
Wohoo, that would be cool [emoji1]
Right now i have a tasker event to lock apps when away from home, but it's not a really save option.your method should be more reliable.
Thanks again!
great work.
Was looking for the same.
Thank you dev. keep it up. tipped for portal.
ahrion said:
Bootloops galaxy s5 stock
Click to expand...
Click to collapse
I also got bootloop with s5. Got by any change a fix without restoring backup or reinstall rom?
Tried wipe dalvik cache and cache but no luck
Nice to hear that you're going to integrate with Tasker to control app protection.
Any plans to support app grouping so we can lock/unlock groups of certain apps depending on (Tasker-)context?
Does not work on my Galaxy S4 I9505 with Android 4.4.2 when selected an application is not saved in the list of selected applications.
cramu said:
Nice to hear that you're going to integrate with Tasker to control app protection.
Any plans to support app grouping so we can lock/unlock groups of certain apps depending on (Tasker-)context?
Click to expand...
Click to collapse
I'm not sure which way, have to thing about it. But at first some bugfixes.
soesie said:
I also got bootloop with s5. Got by any change a fix without restoring backup or reinstall rom?
Tried wipe dalvik cache and cache but no luck
Click to expand...
Click to collapse
You could disable whole xposed with pushing five times a hardware key during boot. After that you have to enable it again in installer! Can you get before that a logcat and attach?
badkill said:
Spanish translation is complete, thanks for another great module :good:
Click to expand...
Click to collapse
Thanks, i'll atach a translated apk late. In case you forgot: The old unlocker should still work
badkill said:
Does not work on my Galaxy S4 I9505 with Android 4.4.2 when selected an application is not saved in the list of selected applications.
Click to expand...
Click to collapse
Please check that the folder "files" was created in /data/data/de.defim.apk.protectedapps. There should be also "cache" and something with shared-preferences. There was with another app also the case the "files" was not created, this should be done by android while installing the app. If you create it by yourself, set the same user&permissions like "de.defim.apk.protectedapps" has
bugs/suggestions
If there is no lock screen set for the phone then protected apps are impossible to open. Further if there is no lock screen set for the phone then it is also impossible to set a different locking method for protected apps and different methods that were set when the phone did have a lock screen stop working when the lock screen is removed.
So suggestion would be to make a way for your app to work even if the user has screen lock set to "None".
Kagoshema said:
bugs/suggestions
If there is no lock screen set for the phone then protected apps are impossible to open. Further if there is no lock screen set for the phone then it is also impossible to set a different locking method for protected apps and different methods that were set when the phone did have a lock screen stop working when the lock screen is removed.
So suggestion would be to make a way for your app to work even if the user has screen lock set to "None".
Click to expand...
Click to collapse
Thanks for reporting, i had not considered that case... Should be fixed in attached file (dont forget to reboot, the app reminds only if version code changed)
@badkill: Also translation included
defim said:
Thanks for reporting, i had not considered that case... Should be fixed in attached file (dont forget to reboot, the app reminds only if version code changed)
@badkill: Also translation included
Click to expand...
Click to collapse
Nice quick fix. I'll give it a test.
Tested:
Looks good. Minor detail; in settings under "method to unlock apps" if "Don't change" is selected then the checkbox "Use a custom patter/PIN/password" does nothing. I'll probably play around more but you've got my donation.
Also: in settings what is the difference between the "time after which a new unlocking is requested"(self explanatory) and "minimal/maximal duration of unlocking"?
Really nice mod. Is it possible to evolve it so that you can have protection for selected operations on the device? Demand pin for deleting SMS or whatever the user choose to protect..?
Sent from my A9500 using XDA Premium 4 mobile app
Related
Cleans up the notification area, and much more
You could configure which apps are allowed to create notifications in the top left area, the notification area. If an app creates a notification it will be collected and added to the list.
You could deny all notifications of an app or only specific messages - if it's not a customized notification. So I used it to hide "waiting for connection", but not "you are connected".
Changed settings are applied after a reboot!
With a donation you supports this app and get more options.
Important:
This app needs the Xposed Framework. The framework requires root access for installation. Don't forget to enable the module in Xposed. You can grab it here: Xposed Installer
Donation:
No self-promotion in the app.
Per app: Hide icon in status bar (collapsed notification area)
Per app: Show notification expanded by default (API>15)
Per app: Order of notifications (move up/down in the list)
Per app: Move to bottom of the list and hide the icon in the status bar
Per app: Deny full screen notifications
Per app: No floating-in (ticker) text in status bar
Per app: Disable LED
Per app: Disable vibration
Per app: Disable sound
Per app: Set notification as removable (ongoing), but also removes "service bit"
Per app: Remove a notification if a newly created was denied (remove updated)
Per app: Regex pattern matching
Per app: Tasker support
Clear unblocked notifications for all apps
Show all apps, even without notifications yet
You support this app and further development!
Website: http://tinyurl.com/lmg9xe6
Play Store: http://tinyurl.com/mfcd47f
Xposed Repository: http://tinyurl.com/kyaeolu
Changelog: http://tinyurl.com/kuufkod
Why this app? I liked this function of LBE, but i wante to remove LBE
Translation:
You could find here a interface to translate the english strings: http://tinyurl.com/okycacj
A free account of www.oneskyapp.com is required to edit. Additional, please attach your email address or send it via PM
Looks very interesting. Do you know in how far this might conflict or work with other, similar modules and/or on certain phones and android versions? Specifically I'm on an lg g2 with xblast installed and without a working recovery, and i don't want to risk a bootloop.
android404 said:
Looks very interesting. Do you know in how far this might conflict or work with other, similar modules and/or on certain phones and android versions? Specifically I'm on an lg g2 with xblast installed and without a working recovery, and i don't want to risk a bootloop.
Click to expand...
Click to collapse
No recovery, no party.
You are risking too much!
android404 said:
Do you know in how far this might conflict or work with other, similar modules and/or on certain phones and android versions? Specifically I'm on an lg g2 with xblast installed and without a working recovery, and i don't want to risk a bootloop.
Click to expand...
Click to collapse
rovo89 said:
[*]Multiple mods can be installed at the same time, even if they change the same package. So you can use these battery icons and those quick toggles. Even hooking the same method twice is possible. Of course, this only works properly if the mods are not trying to do incompatible things.
[/LIST]
Click to expand...
Click to collapse
I've about 10 modules activated on my device. Xposed should catch all exceptions of modules
defim said:
I've about 10 modules activated on my device. Xposed should catch all exceptions of modules
Click to expand...
Click to collapse
It doesn't, I've had bootloops when trying incompatible modules just for kicks.
You're better off waiting for a proper recovery imo.
Sent from my HTC One X using Tapatalk 4
GriffinSauce said:
, I've had bootloops when trying incompatible modules just for kicks.
Click to expand...
Click to collapse
Which modules exactly? Maybe one of them does'nt work, even without others
GriffinSauce said:
You're better off waiting for a proper recovery imo.
Click to expand...
Click to collapse
Manual "recovery":
* start adb within your recovery and connect to it by computer
* remove file /data/data/de.robv.android.xposed.installer/conf/modules.list (for xposed 2.3)
-> no modules will beloaded :victory:
defim said:
Which modules exactly? Maybe one of them does'nt work, even without others
Manual "recovery":
* start adb within your recovery and connect to it by computer
* remove file /data/data/de.robv.android.xposed.installer/conf/modules.list (for xposed 2.3)
-> no modules will beloaded :victory:
Click to expand...
Click to collapse
Even easier...
I have a file named "Xposed-Disabler-cwm.zip" on my sd card. (I believe I downloaded it along with the main Xposed app)
If, due to a module, I get into a boot loop issue etc., which I have...then I simply boot into recovery (without a pc) and run this zip. Boom. All modules are temporarily disabled. :good:
No need for this. gravity have that option now and with out paying!!!!
Sent from my SPH-L900 using xda app-developers app
@themadproducer
I have Xposed-Disabler-cwm.zip too, dated to 10.10.2013, Xposed installer creates it. But now you know to en-/disable without sdcard
@flexxoo As i wrote in the OP also LBE has such an option. But i dont like it to get additional an adblocker, virusscanner, firewall, traffic counte etc bundled. All these additional features consumes memory, uses the cpu and drain your battery.
Maybe you should first try the app before you blame. Then you would also know that you do not have to donate to block notifications
android404 said:
Looks very interesting. Do you know in how far this might conflict or work with other, similar modules and/or on certain phones and android versions? Specifically I'm on an lg g2 with xblast installed and without a working recovery, and i don't want to risk a bootloop.
Click to expand...
Click to collapse
themadproducer said:
Even easier...
I have a file named "Xposed-Disabler-cwm.zip" on my sd card. (I believe I downloaded it along with the main Xposed app)
If, due to a module, I get into a boot loop issue etc., which I have...then I simply boot into recovery (without a pc) and run this zip. Boom. All modules are temporarily disabled. :good:
Click to expand...
Click to collapse
Lol. They posted the manual "recovery" for a reason Lol.
Sent from my XT926 using Tapatalk 4
motodroidfreak said:
Lol. They posted the manual "recovery" for a reason Lol.
Sent from my XT926 using Tapatalk 4
Click to expand...
Click to collapse
Yes indeed.
Realized that later.
totally sweat. any link to apk?
Sblast said:
totally sweat. any link to apk?
Click to expand...
Click to collapse
Yes, in the 1st post is a link to Xposed Repository. There is a direct linkt to download the apk - or just use xposed installer itself to download
Sadly it does not seem to work.
Log shows all recent Notifications but nothing shows up in the main window.
Running AOKP 4.2.2 by Maclaw on a S3 Mini
All other Xposed Stuff works fine.
[Edit]
Disregard it. Actually rebooted twice when i wrote this. After a third reboot its working now
Great App, thanks a lot.
Works like a charm. Thanks for the module.
I would tend to want the red color for ALL, and something "weaker" for individual notifications.
schneidebrett said:
Sadly it does not seem to work.
Log shows all recent Notifications but nothing shows up in the main window.
Running AOKP 4.2.2 by Maclaw on a S3 Mini
All other Xposed Stuff works fine.
[Edit]
Disregard it. Actually rebooted twice when i wrote this. After a third reboot its working now
Great App, thanks a lot.
Click to expand...
Click to collapse
Different sources for both
1) The log entries are taken from debug.log of xposed
2) The database with notifications is updated by the hook every time a new one is detected (no more write access as needed), the app itself reads the file.
But the app has to create the file to get the app's permissions&owner, the hook does not creates it because the app could not read it later due to missing permissions. So the new notifications could not written, but are logged.
I add it to the 1st post
When removing the notification does it remove the service or just the icon in the task bar?
Will android close the app when it needs memory or will the app stay open like when the icons are showing in the task bar?
I wanted to use the module to remove the notification of "No Sim card" (I am currently using N8000 without a sim) it's found in the system ui notifications but when i select it and reboot nothing happens but then i restart system ui and the notification is gone
But when i select it and custom design then reboot it works but i dont know if this would disable other notifications.... .. so What's the problem?!
yeeahnick said:
When removing the notification does it remove the service or just the icon in the task bar?
Will android close the app when it needs memory or will the app stay open like when the icons are showing in the task bar?
Click to expand...
Click to collapse
Technical the app calls the function to create a notification, but this call never reches the system.
I'm using a other app by me named "KeepRunning" to restart crashed/closed apps. I've oberserve also some apps which are configured to not show notification. The logfile of KeepRunning tells me that during the last week only Whatsapp was several times was restarted, but this has no restricted notifications.
So i *think* the apps are not closed by Android. Btw, i the worst case Android closed any app, regardless of services or nifications
Scorpion_Ibm said:
I wanted to use the module to remove the notification of "No Sim card" (I am currently using N8000 without a sim) it's found in the system ui notifications but when i select it and reboot nothing happens but then i restart system ui and the notification is gone
But when i select it and custom design then reboot it works but i dont know if this would disable other notifications.... .. so What's the problem?!
Click to expand...
Click to collapse
Xposed framework has not function to get a "Context"
To get the texts of a notification a "Context" is required
So the module searches for a context to read the notification.
Now the "system ui" starts very early and at this point it seems a context is not yet available and the notification is detected as "text not readable" and the app shows it as "custom design" :-/ If later a context is available notifications of system ui are read correct.
So i think it thould be okay to disable custom design for system ui to get rid of "no sim" notification
You could simple recognize a real custom design of notifications. The app "My Data Manager" uses such a one for notifications, i've attached a screenshot and marked it
You could enable the full logging by creating a empty file /data/data/de.defim.apk.notifyclean/files/NotifyClean.logging , a reboot is required to take effect. Be warned, it could slow down your device, so enable it not all the time
Allows only desirable toasts, and much more
You could configure which apps are allowed to show toast notifications. If an app creates a toast it will be collected and added to the list.
You could deny *all* toasts of an app or only *specific* messages.
Changed settings are applied immediately!
A donation supports this app and further development!
Important:
This app needs the Xposed Framework. The framework requires root access for installation. Don't forget to enable the module in Xposed. You can grab it here: Xposed Installer
Donation:
No self-promotion in the app.
Text of the toast could be centered
Change toast style to GingerBread, JellyBean or KitKat
Add icon of the causing app, 6 different sizes
Add name of the app which created the toast
Per app: Regex pattern matching
Per app: Tasker support
Clear unblocked toasts for all apps
Show all apps, even without toasts yet
You support this app and further development!
Website: http://tinyurl.com/nafsxjd
Play Store: http://tinyurl.com/q6zrblv
Xposed Repository: http://tinyurl.com/lzoowto
Changelog: http://tinyurl.com/mj3zr4f
Why this app? No other easy to use app exists
Translation:
You could find here a interface to translate the english strings: http://tinyurl.com/okycacj
A free account of www.oneskyapp.com is required to edit. Additional, please attach your email address or send it via PM
Amazing, keep up dev:good:
can we get Gingerbread support plz?
It is what i needed ! The only bad thing about it is its icon !
@defim
Absolutely brilliant.
This module helps fix some other toast related issues I had with using buttered and burnt toast. Now I have harmony and control.
Thanks bro.
BTW, I get toasts from Go Launcher Prime that do not get registered with your module. Is it possible to fix this?
killoid said:
can we get Gingerbread support plz?
Click to expand...
Click to collapse
Not planned at the moment, have still no device to test. Maybe some time (it's the last point at my todo list)
pesiran said:
It is what i needed ! The only bad thing about it is its icon !
Click to expand...
Click to collapse
Sorry, i know. :crying: The one who contribute a icon (with colors red and blue) can get rid of the donate reminder bar :laugh:
themadproducer said:
@defim
BTW, I get toasts from Go Launcher Prime that do not get registered with your module. Is it possible to fix this?
Click to expand...
Click to collapse
EnhancedToast should record every toast, it hooks to a android function. I had never used Go Launcher. Could it be that this app uses a own "toast" method? Try to enable full logging in the settings and watch the logfile if such a toast is created
mauam said:
Amazing, keep up dev:good:
Click to expand...
Click to collapse
Tested so quickly? I expect errors in the first release version :angel:
defim said:
EnhancedToast should record every toast, it hooks to a android function. I had never used Go Launcher. Could it be that this app uses a own "toast" method? Try to enable full logging in the settings and watch the logfile if such a toast is created
Click to expand...
Click to collapse
@defim
OK...I will try to watch the log.
Just to let you know...maybe a clue...both Burnt Toast and Buttered Toast modules work with the GoLauncher Toast. So in other words, they both see and modify the GoLauncher toast. Other app toasts tested so far are seen by all three modules (enhanced/buttered/burnt toast)
Can it change the color of the toast?
themadproducer said:
@defim
OK...I will try to watch the log.
Just to let you know...maybe a clue...both Burnt Toast and Buttered Toast modules work with the GoLauncher Toast. So in other words, they both see and modify the GoLauncher toast. Other app toasts tested so far are seen by all three modules (enhanced/buttered/burnt toast)
Click to expand...
Click to collapse
Maybe a reboot helps, xposed is sometimes a little tricky..
obstructer said:
Can it change the color of the toast?
Click to expand...
Click to collapse
No, not at the moment
themadproducer said:
BTW, I get toasts from Go Launcher Prime that do not get registered with your module. Is it possible to fix this?
Click to expand...
Click to collapse
EDIT 3: Working now, but with a disadvantage: All "launcher" apps do not get new settings immediately, they need a reboot..
Thanks for the module, Nice be able able to control the ever growing number of toast messages.
I haven't encountered any errors, but I do have a feature request.
I would love to see some form of pattern matching, to filter on that.
If you look at the screenshot I block the TB "Number of app data elements:" toast. But since this number changes all the time I need to set it for every number. That's not very practical.
defim said:
EDIT 3: Working now, but with a disadvantage: All "launcher" apps do not get new settings immediately, they need a reboot..
Click to expand...
Click to collapse
@defim
That's Fantastic Thankx regarding Edit 3.
I look forward to testing it.
Reboot is not an issue at all for my needs..
defim said:
EDIT 3: Working now, but with a disadvantage: All "launcher" apps do not get new settings immediately, they need a reboot..
Click to expand...
Click to collapse
@defim
I updated, rebooted, made GoLauncher popup it's toast message, opened Enhanced Toast module, highlighted the GoLauncher specific toasts, and without reboot, tested. Popup toasts were intercepted successfully.
Thx very much.
themadproducer said:
Reboot is not an issue at all for my needs..
Click to expand...
Click to collapse
Reboot is not required if the "reload always" is enabled (=default). I should not write anything before i have done it ...
There are some apps which uses "special" toasts, like Swype (eg on changing language), EX File Explorer (eg on "back" touch) or GO Launcher. They all could now be handled
Btw, i just pushed another update. There was a bug which could prevent recording of any toasts :silly:
kantjer said:
I haven't encountered any errors, but I do have a feature request.
I would love to see some form of pattern matching, to filter on that.
Click to expand...
Click to collapse
There are some more features for donators, like Regex, Tasker, ...
I've attached the "strings.xml" to 1st post if someone like to have the app translated in its language. Don't forget to send me your emal adress!
I have translated this app to Spanish
strings attached
My email is: [email protected]
defim said:
There are some more features for donators, like Regex, Tasker, ...
Click to expand...
Click to collapse
Thanks, the Regex option is great. Haven't tried the Tasker plugin yet.
@badkill: Thanks. Mail is sent and I will upload it later to Store/Repository
kantjer said:
Thanks, the Regex option is great. Haven't tried the Tasker plugin yet.
Click to expand...
Click to collapse
I'm not using Tasker by myself anymore. But it's a easy way for everyone without developing knowledge to do self defined things for every toast (or notification with NotifyClean)
defim said:
[MENTION=3967831]I'm not using Tasker by myself anymore. But it's a easy way for everyone without developing knowledge to do self defined things for every toast (or notification with NotifyClean)
Click to expand...
Click to collapse
Is Tasker support already build in? I can't find in the plugin list.
I have the DefimDonator package installed.
This module is a rather simple yet useful one
It allows you to open different apps or launcher shortcuts using different PIN codes/patterns
This is NOT for security, infact it reduces security (more passwords, so more chance of getting it right)
It simply allows you to set shortcuts
EXAMPLE USAGE
Set 1111 as password for "Phone" app
Set 2222 as password for "Messaging" app
Set 0000 as normal password, from Android Settings app
Then, when I type 0000, it will unlock as normal
When i type 1111, it will unlock and then launch "Phone"
When I type 2222, it will unlock and then launch "Messaging"
It should work with PIN and password and now also patterns!
This mod can be found attached to this post or in the Xposed Repo
Please also consider the pro version, it is an in app purchase within the free one
Source code here
Changelog
Version 3.2 (5/3/16)
Option to use the system function of app pinning so other apps can't be opened after using a shortcut to unlock the device (pro only)
Version 3.1 (28/2/16)
Pro version - Launch system shortcuts eg Tasker or direct dial
Version 3.0 (24/2/16)
New design
Shows list of existing shortcuts
Version 2.1 (21/2/16)
Marshmallow support
Initial Material Design support
Version 2.0.1 (21/8/14)
Bug fixes
Version 2.0 (20/8/14)
Pattern shortcuts support
Version 1.0 (12/7/14)
Initial Release
Planned Features
You tell me!
Working perfectly on my S4. Thanks!
I don't use pattern unlock, but the more options available to the user, the better, right?
- Sent from my Galaxy S4 using Tapatalk because the XDA app sucks.
It's a long shot but if you could add tasker support to this, I can't even imagine the different scenarios we could use directly from lockscreen.
mnsk said:
It's a long shot but if you could add tasker support to this, I can't even imagine the different scenarios we could use directly from lockscreen.
Click to expand...
Click to collapse
A lot of people have asked for Tasker support for many of my mods
The truth is I don't know how to make Tasker plugins. I don't even have Tasker
And what would it do in this case anyway?
hamzahrmalik said:
A lot of people have asked for Tasker support for many of my mods
The truth is I don't know how to make Tasker plugins. I don't even have Tasker
And what would it do in this case anyway?
Click to expand...
Click to collapse
You could directly ask the developer of tasker. He will surely help you.
And I think there is something on his website also for integrating support.
I could create any task, such as switching on mobile data and launching an app simultaneously.
And that task will be triggered by your module when I enter a pin or pattern.
It's all depends on your imagination after that.
---------- Post added at 03:34 AM ---------- Previous post was at 03:30 AM ----------
I just realised you are also the developer of fastscroll, very handy.
Looking forward to this module.
If you add shortcuts (that same of launchers) people can call Tasker from creating password actions for shortcut.
Waiting for pattern to test
Edwrib said:
If you add shortcuts (that same of launchers) people can call Tasker from creating password actions for shortcut.
Waiting for pattern to test
Click to expand...
Click to collapse
mnsk said:
You could directly ask the developer of tasker. He will surely help you.
And I think there is something on his website also for integrating support.
I could create any task, such as switching on mobile data and launching an app simultaneously.
And that task will be triggered by your module when I enter a pin or pattern.
It's all depends on your imagination after that.
---------- Post added at 03:34 AM ---------- Previous post was at 03:30 AM ----------
I just realised you are also the developer of fastscroll, very handy.
Looking forward to this module.
Click to expand...
Click to collapse
If I just add support for shortcuts instead of just apps then would that be OK?
hamzahrmalik said:
If I just add support for shortcuts instead of just apps then would that be OK?
Click to expand...
Click to collapse
For users that want call Tasker tasks, yes.
Exist one app called auto shortcuts, they can call Tasker tasks with shortcut.
hamzahrmalik said:
If I just add support for shortcuts instead of just apps then would that be OK?
Click to expand...
Click to collapse
Yup it will work.
Very nice ill give it a try.
Please make it with activities too
Sent from my Xperia Z using XDA Premium 4 mobile app
shmykelsa said:
Please make it with activities too
Sent from my Xperia Z using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I think that will be in donate version
hamzahrmalik said:
I think that will be in donate version
Click to expand...
Click to collapse
I'll pay for that then. It's such a great module. Keep it up!
Sent from my Xperia Z using XDA Premium 4 mobile app
Anyone try this with Timepin as their lock screen? Don't want to test it and lock myself out with conflicting lock issues!
Goliath27 said:
Anyone try this with Timepin as their lock screen? Don't want to test it and lock myself out with conflicting lock issues!
Click to expand...
Click to collapse
If you get locked out just use ADB to delete the password. Google for instructions
Can't wait for pattern support!
abell431 said:
Can't wait for pattern support!
Click to expand...
Click to collapse
We would have it by now but my laptop is being slow haha
I ditched Windows yesterday in favour of Linux and its transferring my stuff
hamzahrmalik said:
If you get locked out just use ADB to delete the password. Google for instructions
Click to expand...
Click to collapse
Knew that already and was being scared after a previous lockout.
So it works good with timepin but it doesn't unlock the device. Time pin uses two types of locks:
1. The default lock code, used when you first unlock after booting
2. The Time unlock code, which changes every minute.
I'm using this module to set the Flashlight app as an unlock code. I didn't really need it to unlock, just to turn on the flashlight which it does very well. But to turn it off I would need to unlock my phone the normal way.
TL;DR - it doesn't unlock the device if you're using time pin, but does activate the set app when the code is entered.
This is the continuation of the MinMinLock module developed by @FatMinMin. All original credits belong to him!
Features
FatMinMin said:
Conventional applock softwares use polling to detect current running process, which drains your battery and slowers your device. This is why I have created MinMinLock. With the help of Xposed framework, MinMinLock uses an event-driven method to detect app launch and lock it, which results in better performance.
Click to expand...
Click to collapse
Visit MaxLock website!
Multiple lock types: Password, PIN, Knock code
SHA-256-encrypted passwords
Nice design
Many UI personalization options
Fake die: app force closes on start, click on "Report" in dialog, then enter "start"
Compatibility from Android™ JellyBean to Lollipop
Tips and special features are located in About screen in-app
Screenshots
On Google Play™
Downloads
Xposed Repo
Changelog
Look here
Source code
https://github.com/Maxr1998/MaxLock
The code is licensed under GNU GPL v3 license.
Translations
Thanks to all the voluntary translators! Visit about section in app to see their names.
If you also want to translate module to your language or improve the existing translation, head over to source code, fork, translate and send pull-request!
Android, Google Play and the Google Play logo are trademarks of Google Inc.
thanks for this excellent module and the mention in the first post
EDIT: download error, the error message: wrong package name, download minminlock.apk instead of maxlock.apk
badkill said:
thanks for this excellent module and the mention in the first post
EDIT: download error, the error message: wrong package name, download minminlock.apk instead of maxlock.apk
Click to expand...
Click to collapse
fixed, pushed update...already mentioned in Xposed Repo
@Maxr1998 any chance of gingerbread support plz?
killoid said:
@Maxr1998 any chance of gingerbread support plz?
Click to expand...
Click to collapse
Um... That's not easy...
I would have to create another version, since most APIs I am using don't work for GB. Also I don't know if the base code works.
Maybe some time later, but for now I'll focus on the main version.
Sent using my nexus⁴ running Mahdi 2.7 with Xposed and hells-Core B57 KK
Pretty nice.
pattern lock mode???
can we also have pattern lock mode
satsmagic said:
can we also have pattern lock mode
Click to expand...
Click to collapse
I would really like to do if I knew! I'll look into it..
Sent using my nexus⁴ running Mahdi 2.7 with Xposed and hells-Core B57 KK
when i unlock the app it doesnt lock back when i exit the app or turn off the screen
vip57 said:
when i unlock the app it doesnt lock back when i exit the app or turn off the screen
Click to expand...
Click to collapse
The app stays unlocked after first opening it. If you want to relock it, you have to close app from recent apps.
So it's not a bug, it's a feature.
Sent using my nexus⁴ running Mahdi 2.7 with Xposed and hells-Core B57 KK
Maxr1998 said:
The app keeps unlocked for a amount of time, if you want to relock it, you have to close app from recent apps.
So it's not a bug, it's a feature.
Sent using my nexus⁴ running Mahdi 2.7 with Xposed and hells-Core B57 KK
Click to expand...
Click to collapse
In future we have option for this?? E.g relock app on every opening and also with screenoff option??
I'm using miui android and the apps won't get locked when I close then from recent. Maybe add an select able manual timeout which starts counting as soon as the app is minimized?
Also +1 for auto lock option as soon as screen is turned off.
The lock itself is working great! Thank you very much! I've been looking for a simple app lock.
Sent with my Xiaomi MI2 with Tapatalk Pro
Any chance for fingerprint lock on Samsung devices?
dont forget htc one max. taht also has a finger sensor.
Hi max
Please consider adding a master switch.
Also there are some problems , for example i want to send photos via viber and the password field pops up , when i type it and click ok it starts viber over and doesnt start its gallery for choosing photos , appreciate your work.
Thanks
It's possible to add the system apps like the app installer?
mnhs1010 said:
In future we have option for this?? E.g relock app on every opening and also with screenoff option??
Click to expand...
Click to collapse
+1 for this request.
What is the time it takes to relock in current version please?
Droidphilev said:
+1 for this request.
What is the time it takes to relock in current version please?
Click to expand...
Click to collapse
As Max said, the app relocks once it's removed from "Recent Apps" or force closed. There is no time limit or anything like that... the process stops and the app gets locked. It has been like this since the first version.
Hi,
devotek said:
As Max said, the app relocks once it's removed from "Recent Apps" or force closed. There is no time limit or something like that.
Click to expand...
Click to collapse
Well, he wrote: "The app keeps unlocked for a amount of time, if you want to relock it, you have to close app from recent apps.
So it's not a bug, it's a feature."
As i read it it says it get's locked after some time but i you want to immediately lock it then remove it from recents. That's why i asked.
Droidphilev said:
Hi,
Well, he wrote: "The app keeps unlocked for a amount of time, if you want to relock it, you have to close app from recent apps.
So it's not a bug, it's a feature."
As i read it it says it get's locked after some time but i you want to immediately lock it then remove it from recents. That's why i asked.
Click to expand...
Click to collapse
No, @devotek is right, it is only locked again when closing the process, the timeout is another thing:
When launching an app, the app gets force closed by module and the lock activity gets launched, so after entering password the process is restarted. Now the timeout (some milliseconds) only helps that after relaunching the app it doesn't prompt again for password. Hope you understood.
Sent using my nexus⁴ running Mahdi 2.7 with Xposed and hells-Core B57 KK
AppOpsXposed Re is a module for the Xposed framework that restores AppOps functionality on recent Android versions.
"Re" (short for "revised") version got a few updates compared to the original, making it work on newer Androids, like Nougat and Oreo.
Original thread by caspase: AppOpsXposed - AppOps for 4.3+
What is AppOps? What's the difference between AppOps and permissions?
AppOps is a feature that is included in Android starting with JellyBean 4.3. It allows the user to limit an apps functionality, regardless of permissions granted; for example, you can prevent an app from reading your contact list, or accessing your current location. The difference between revoking permissions and using AppOps is that in the latter case, the affected app will not know what happend and, most importantly, will (usually) not crash. In the case of the location, the app will think that the location is currently unavailable. In the case of your contact list, the app will see an empty list.
An important thing to keep in mind is that AppOps was not intended for end-users, so some features do not work as advertised. Limiting "Keep awake" for example has no effect, as this was not implemented by the Android developers.
Compatible with all Android versions from 4.3 'Jelly Bean' to 9.0 'Pie'.
Credits:
Xposed Framework: rovo89 & Tungstwenty
Original module: caspase
Download: AppOpsXposed Re on Xposed Module Repository
How to report problems efficiently?
- Enable the Debug log in settings
- Use functions that don't work as intended
- Export the logs from Xposed app and put them on PasteBin
- Post on the XDA thread the link along with more information about your device
XDA:DevDB Information
AppOpsXposed Re, Xposed for all devices (see above for details)
Contributors
Xspeed, caspase
Source Code: https://github.com/XspeedPL/AppOpsXposed
Xposed Package Name: at.jclehner.appopsxposed.re
Version Information
Status: Stable
Current Stable Version: 1.30.6
Stable Release Date: 2019-03-09
Created 2018-08-10
Last Updated 2019-03-08
you rock dude. I had to settle for my 2nd favorite rom for my daily driver bc it had no AppOps. Now I'm free!!! when I get time I will flash back and give this a try.
Thanks for sharing!!!!
Hey, thanks for your work (even though I'm still on Nougat).
I have three questions though:
- when I go into an app's persmissions screen the sliders in 1.30.4 turned green when turned on and grey when off. In 1.30.5 they're always grey, can this be modified so they change color depending on how their status is?
-also in an app's permission screen, the name of each permission was differently formated and translated in 1.30.4. Could this be ported over to your version of AppOps?
-the next thing didn't work with 1.30.4 either but maybe it can be fixed (or my phone simply isn't compatible), when I go to designs and change the icons of AppOpsXposed, none of them changes in the phone's settings / app overview screen.
I have some screenshots attached. My phone is the HTC 10 on Nougat, regularly rooted
sutobe said:
- when I go into an app's persmissions screen the sliders in 1.30.4 turned green when turned on and grey when off. In 1.30.5 they're always grey, can this be modified so they change color depending on how their status is?
Click to expand...
Click to collapse
It's really easy to change, I am experimenting with colors at the moment.
When I was releasing this I prioritized functionality over looks, but it will be done, no worries.
-also in an app's permission screen, the name of each permission was differently formated and translated in 1.30.4. Could this be ported over to your version of AppOps?
Click to expand...
Click to collapse
I am aware of that, the labels got messed up when I was porting the code base. I'll see what can be done.
-the next thing didn't work with 1.30.4 either but maybe it can be fixed (or my phone simply isn't compatible), when I go to designs and change the icons of AppOpsXposed, none of them changes in the phone's settings / app overview screen.
Click to expand...
Click to collapse
It actually works like the previous version. To see those changes you can either reboot or restart the "UI" process.
To make it work auto-magically a lot more work would be needed, and to be honest, for a single time use feature it's not worth it in my opinion.
It works
But after disabling some ops (permissions) those apps on going notification don't show the notification bar although they're running in the background.
But if i revert it then the notification shows
FC after start at HTC One M7 with Android 5 ROM
Sent from my HTC One using XDA Labs
Nice this cutie is now offical.
Used your inoffical mod since oh my gosh ..long time ago...about a year
on LP, MM, Nougat
:good:
Awww yeah!... Thankyou for this!
Auto close app everytym when i open :/
Mockingbird_ said:
Auto close app everytym when i open :/
Click to expand...
Click to collapse
How to report problems efficiently?
- Enable the Debug log in settings
- Use functions that don't work as intended
- Export the logs from Xposed app and put them on PasteBin
- Post on the XDA thread the link along with more information about your device
Click to expand...
Click to collapse
Maybe try caspase appsops.
For me it works now better with my nougat device. Better permisson controll* and less errors on apps with blocked permissions :good:
*possible to block audio focus on music, video, notification
Hi! What's the difference of this and the appopsxposed without the "re"?~
nijihana said:
Hi! What's the difference of this and the appopsxposed without the "re"?~
Click to expand...
Click to collapse
Original module was supposedly abandoned. This version was updated to support newer Androids, including Nougat and Oreo.
"Re" is short for "revised".
Xspeed said:
Original module was supposedly abandoned. This version was updated to support newer Androids, including Nougat and Oreo.
"Re" is short for "revised".
Click to expand...
Click to collapse
Thank you!
Any chance blocking apps permission to change system settings?
A language file for translation would be nice
edit:
Now i see modul can block "write system" e.g. it can denin on playstore / service but some apps still
change system ( froce app to run in backround) after install an update.
So if an app has no permission to write system how it can change settings even if i denin playstore & service permisson to change system? ^^^^
This app is broking the item "Fingerprint scanner" in the settings of phone. I get FC when I try to open it. My phone is HTC U11, Adrroid 8.0, ROM LeeDroid.
@Xspeed: 'Add OP_BOOT_COMPLETED' in the hacks menu still doesn't work after checking the box and rebooting, there is no option anywhere to control whether an app can start on boot. I'm running a pure AOSP ROM so there is no Privacy Guard, etc. Is there a workaround/fix for this?
Thanks!
@Xspeed Just curious, what are the chances of this getting updated for Pie?
toBsucht Psp said:
Now i see modul can block "write system" e.g. it can denin on playstore / service but some apps still
change system ( froce app to run in backround) after install an update.
So if an app has no permission to write system how it can change settings even if i denin playstore & service permisson to change system? ^^^^
Click to expand...
Click to collapse
What settings is the app changing after you disabled the permission?
smallKING81 said:
This app is broking the item "Fingerprint scanner" in the settings of phone. I get FC when I try to open it. My phone is HTC U11, Adrroid 8.0, ROM LeeDroid.
Click to expand...
Click to collapse
I am going to need LogCat during the FC from you to be able to see what's exactly wrong.
AnonVendetta said:
@Xspeed: 'Add OP_BOOT_COMPLETED' in the hacks menu still doesn't work after checking the box and rebooting, there is no option anywhere to control whether an app can start on boot. I'm running a pure AOSP ROM so there is no Privacy Guard, etc. Is there a workaround/fix for this?
Click to expand...
Click to collapse
This boot run blocking is actually a hack that works only on some devices, to be honest it doesn't work on mine either
bkkzak said:
@Xspeed Just curious, what are the chances of this getting updated for Pie?
Click to expand...
Click to collapse
If you mean EdXposed, you're unfortunately out of luck. This module HEAVILY relies on so called "resource hooks" that EdXposed doesn't support at the moment. Sorry
What is the difference between this app and AppOpsX from F-Droid? does it work on Android Pie?
MDV106 said:
What is the difference between this app and AppOpsX from F-Droid? does it work on Android Pie?
Click to expand...
Click to collapse
To be honest I've never heard of AppOpsX. The two applications work completely different under the hood.
There is stuff non-Xposed apps can't do, like adding a shortcut to AppOps on the app details activity.
Regarding your second question, YES!
The fresh new 1.30.6 version supports Android 9.0 Pie and EdXposed.
I managed to make it work by separating resource hooking related stuff to a second module and made it optional for other functionality.
Simple? Absolutely. Clever? Maybe. AppOps? Xposed. Sorry :/