Apps use current orientation.
Annoyed apps changing current screen orientation? Try this module!
If you are using in landscape, some apps force orientation to portrait. So you have to rotate you device to use this app which is a bad user experience. With this module these apps don't change anymore the screen orientation and you could use it in current orientation. An example of such an app is System app remover
There are 2 apps with same effect, but
HaveOwnOrientation (free): This app has no user interface. Enable it in Xposed - reboot - done.
OwnOrientation (donate): User interface for simple configuring, logging etc
IMPORTANT
Xposed needs root access for installation
Website: http://tinyurl.com/nq32zze
Play Store OwnOrientation (donate): http://tinyurl.com/lj52cp6
Play Store HaveOwnOrientation (free): http://tinyurl.com/kl865jr
Xposed Repository HaveOwnOrientation (free): http://tinyurl.com/lryg5dn
APK download HaveOwnOrientation (free): http://tinyurl.com/mzert7f
Why these apps? To lazy to rotate the device!
Thanks, testing the module
Thanks, I can confirm that it is working flawlessly on Galaxy Note 10.1, I just tested it with the Instagram:good::good:
defim can you add a blacklist in future updates??
Sent from my SM-N900T using XDA Premium 4 mobile app
Good Work
defim said:
Apps use current orientation.
Annoyed apps changing current screen orientation? Try this module!
If you are using in landscape, some apps force orientation to portrait. So you have to rotate you device to use this app which is a bad user experience. With this module these apps don't change anymore the screen orientation and you could use it in current orientation. An example of such an app is System app remover
This app has no user interface. Enable it in Xposed - reboot - done.
IMPORTANT
Xposed needs root access for installation
Website: http://tinyurl.com/nq32zze
Play Store: http://tinyurl.com/kl865jr
Xposed Repository: http://tinyurl.com/lryg5dn
Why this app? To lazy to rotate the device!
Click to expand...
Click to collapse
scrolling problem with calc+ powerful calculator in landscape mode. otherwise worked with most of the apps in landscape mode.
@faizan.rupani: Maybe the app checks the current location and sets it again if it is not as desired. Can you post a link to the app?
@flexxoo: User interface is not planned so far. If you want to have an app in other orientation, just turn device - if automatic orientation is enabled.
Excellent! Well done @defim - at long last I can open Sky+ app in portrait mode
On my Galaxy S2, S3 and S4... all international variants this module reverses the camera and locks it in both portrait and landscape.
cdzo72 said:
On my Galaxy S2, S3 and S4... all international variants this module reverses the camera and locks it in both portrait and landscape.
Click to expand...
Click to collapse
Just realised that the same thing happens on my NOTE 10.1
Skhulile said:
Just realised that the same thing happens on my NOTE 10.1
Click to expand...
Click to collapse
Second that, this module is must have but makes camera almost unusable (tried this on my Note 3)
+1 for application settings for blacklist
Hello, I tried the module and it works, but when I rotate the screen potrait mode on apps that are supposed to be used in landscape mode only the screen just goes black. It would be wonderful to be able to fine tune the module for each indivudual app like "Ultimate Rotation Control" does
Makes my screen camera screen black so I can't see what I'm taking pictures of lol HTC one m8 I know its been said and its probably noted just wanted to tell ya but great module been looking for something like this for awhile now
Hi! Tried the module. This modules solves my problem with the game called:
School Idol Festival both, English and Japanese Versions.
but when I launch the app while in portrait, then i rotated to landscape, it scales with the same size as in portrait having only 1/4 on the screen
what i mean is that when i launch the app, it retains it's size and doesnt rescale with the current orientation.
just an opinion maybe you could also add a blacklist or sort . just an opinion.
Good Job anyways
Okay okay, rudimentary block list added, no time atm for full gui. Just place package names in the file of apps which should not be blocked.
If you dont know the package name
- open Play Store in webbrowser, the ?id= part of the ur is the app
- or enable debug in the module, it shows all package names in xposed log
- or search in the created blockfile the app, but there are no new installed apps added
failed to work
hi
i have had successful experience with the module after installing it
however
i accidentally made xposed installer system app and starting from then the module failed to work
i have tried numerous times to uninstall and reinstall xposed installer and the module
but still it did not work
are there any fix to this problem?
i am using note pro P905 4.4.2
thank you for your help
edmundchu said:
hi
i have had successful experience with the module after installing it
however
i accidentally made xposed installer system app and starting from then the module failed to work
i have tried numerous times to uninstall and reinstall xposed installer and the module
but still it did not work
are there any fix to this problem?
i am using note pro P905 4.4.2
thank you for your help
Click to expand...
Click to collapse
If Xposed is system or not should not matter - but could cause other problems, dont know excatly.
If you open the module it "opens" a text file with you default app. Maybe you have set one earlier as default which does nothing. This assignement could be reset in Andorid app drawer "reset defaults", or so.
You could also open the file manually: /data/data/de.defim.apk.haveownorientation/files/HaveOwnOrientation.txt
defim said:
If Xposed is system or not should not matter - but could cause other problems, dont know excatly.
If you open the module it "opens" a text file with you default app. Maybe you have set one earlier as default which does nothing. This assignement could be reset in Andorid app drawer "reset defaults", or so.
You could also open the file manually: /data/data/de.defim.apk.haveownorientation/files/HaveOwnOrientation.txt
Click to expand...
Click to collapse
i found the file
sorry for misleading
i found the .txt
wt should i do with it?
i can read the .txt now
but i still cant lock the orientation of apps
do you know wt is the cause of this problem?
update:
i have installed an older version of your module and it worked
not sure if i should try to update it
update 2:
i have tried to update the module but it turned out to be not working after update....
damn it.....
Thanks man the new block app works perfect, thanks a lot:good:
edmundchu said:
i found the file
sorry for misleading
i found the .txt
wt should i do with it?
i can read the .txt now
but i still cant lock the orientation of apps
do you know wt is the cause of this problem?
update:
i have installed an older version of your module and it worked
not sure if i should try to update it
update 2:
i have tried to update the module but it turned out to be not working after update....
damn it.....
Click to expand...
Click to collapse
Your Xposed is working at all? Which Android version does you have?
Does the module load? Could be see in the xposd log
You could enable the "debug" in the config file and have more messages in the xposed log after reboot
does it do the same thing as this thread?
Related
This thread is for the Hybrid rom found here http://forum.xda-developers.com/showthread.php?t=1581065
I used this rom since its release but never tried to fix anything until I tried a few Jellybean roms. I don't think Jellybean is for me right now. It was too slow plus the HW overlay issues were a dealbreaker. Jellybean does have nice features, but I'll wait til it becomes more stable before I make the switch. So I came back to this rom and decided I was gonna fix some of the broken apps. The browser, calendar, SMemo, world clock, calculator and Contacts were all broken in tablet mode but I have fixed all these apps.
These fixes are based on my rom setup with the no pad zip installed. If you take a minute to fully read the instructions you will have a per app DPI rom without using pad.
To fix these app download this zip http://www.4shared.com/zip/Q9zUAkiZ/replacement_apps.html and replace all the APKs in System/Apps with the same name, set permissions to rw,r,r and reboot. The AT&T calendar will now be replaced with SPlanner, The dialer and SMemo will now be sized as they should be, and the browser and world clock will now work without crashing. The contacts still need fixed, to fix them you will have to install these two apps, XPosed Installer and XPosed App Settings http://www.4shared.com/zip/YjaxuxIb/XPosed_Installer.html. Place the Xposed-Disabler-CWM.zip on your SD Card incase something goes wrong you can disable XPosed Installer from recovery also place the jar file in your SD Card and leave it. After installing open XPosed Installer and click on Install/Update. Next click on Modules and check XPosed App Settings, and reboot. Now open XPosed App Settings and find contacts in the list and click on it, click ON/OFF at the top, set the dpi to whatever you want, the Screen (dp,px) must be set to 480x854 or contacts will still crash. After rebooting your contacts will open normaly. To fix the calculator (not the one labled Popup Calculator) set the dpi to 320 with XPosed App Settings, after reboot it will be sized and displayed correctly. I have also provided a working APK for the video player in the above zip that has a working popup player. The only thing I have not been able to fix so far is the mini apps but I am working on that right now and when I fix them I will post it here. Also the browser will not find text on page and neither will ICS Browser Plus from the market in tablet mode.
The XPosed Installer combined with Xposed App Setting turns this rom into per app DPI rom without pad.
If anyone has a fix for the mini video or mini music players please post them.
Cleans up the notification area, and much more
You could configure which apps are allowed to create notifications in the top left area, the notification area. If an app creates a notification it will be collected and added to the list.
You could deny all notifications of an app or only specific messages - if it's not a customized notification. So I used it to hide "waiting for connection", but not "you are connected".
Changed settings are applied after a reboot!
With a donation you supports this app and get more options.
Important:
This app needs the Xposed Framework. The framework requires root access for installation. Don't forget to enable the module in Xposed. You can grab it here: Xposed Installer
Donation:
No self-promotion in the app.
Per app: Hide icon in status bar (collapsed notification area)
Per app: Show notification expanded by default (API>15)
Per app: Order of notifications (move up/down in the list)
Per app: Move to bottom of the list and hide the icon in the status bar
Per app: Deny full screen notifications
Per app: No floating-in (ticker) text in status bar
Per app: Disable LED
Per app: Disable vibration
Per app: Disable sound
Per app: Set notification as removable (ongoing), but also removes "service bit"
Per app: Remove a notification if a newly created was denied (remove updated)
Per app: Regex pattern matching
Per app: Tasker support
Clear unblocked notifications for all apps
Show all apps, even without notifications yet
You support this app and further development!
Website: http://tinyurl.com/lmg9xe6
Play Store: http://tinyurl.com/mfcd47f
Xposed Repository: http://tinyurl.com/kyaeolu
Changelog: http://tinyurl.com/kuufkod
Why this app? I liked this function of LBE, but i wante to remove LBE
Translation:
You could find here a interface to translate the english strings: http://tinyurl.com/okycacj
A free account of www.oneskyapp.com is required to edit. Additional, please attach your email address or send it via PM
Looks very interesting. Do you know in how far this might conflict or work with other, similar modules and/or on certain phones and android versions? Specifically I'm on an lg g2 with xblast installed and without a working recovery, and i don't want to risk a bootloop.
android404 said:
Looks very interesting. Do you know in how far this might conflict or work with other, similar modules and/or on certain phones and android versions? Specifically I'm on an lg g2 with xblast installed and without a working recovery, and i don't want to risk a bootloop.
Click to expand...
Click to collapse
No recovery, no party.
You are risking too much!
android404 said:
Do you know in how far this might conflict or work with other, similar modules and/or on certain phones and android versions? Specifically I'm on an lg g2 with xblast installed and without a working recovery, and i don't want to risk a bootloop.
Click to expand...
Click to collapse
rovo89 said:
[*]Multiple mods can be installed at the same time, even if they change the same package. So you can use these battery icons and those quick toggles. Even hooking the same method twice is possible. Of course, this only works properly if the mods are not trying to do incompatible things.
[/LIST]
Click to expand...
Click to collapse
I've about 10 modules activated on my device. Xposed should catch all exceptions of modules
defim said:
I've about 10 modules activated on my device. Xposed should catch all exceptions of modules
Click to expand...
Click to collapse
It doesn't, I've had bootloops when trying incompatible modules just for kicks.
You're better off waiting for a proper recovery imo.
Sent from my HTC One X using Tapatalk 4
GriffinSauce said:
, I've had bootloops when trying incompatible modules just for kicks.
Click to expand...
Click to collapse
Which modules exactly? Maybe one of them does'nt work, even without others
GriffinSauce said:
You're better off waiting for a proper recovery imo.
Click to expand...
Click to collapse
Manual "recovery":
* start adb within your recovery and connect to it by computer
* remove file /data/data/de.robv.android.xposed.installer/conf/modules.list (for xposed 2.3)
-> no modules will beloaded :victory:
defim said:
Which modules exactly? Maybe one of them does'nt work, even without others
Manual "recovery":
* start adb within your recovery and connect to it by computer
* remove file /data/data/de.robv.android.xposed.installer/conf/modules.list (for xposed 2.3)
-> no modules will beloaded :victory:
Click to expand...
Click to collapse
Even easier...
I have a file named "Xposed-Disabler-cwm.zip" on my sd card. (I believe I downloaded it along with the main Xposed app)
If, due to a module, I get into a boot loop issue etc., which I have...then I simply boot into recovery (without a pc) and run this zip. Boom. All modules are temporarily disabled. :good:
No need for this. gravity have that option now and with out paying!!!!
Sent from my SPH-L900 using xda app-developers app
@themadproducer
I have Xposed-Disabler-cwm.zip too, dated to 10.10.2013, Xposed installer creates it. But now you know to en-/disable without sdcard
@flexxoo As i wrote in the OP also LBE has such an option. But i dont like it to get additional an adblocker, virusscanner, firewall, traffic counte etc bundled. All these additional features consumes memory, uses the cpu and drain your battery.
Maybe you should first try the app before you blame. Then you would also know that you do not have to donate to block notifications
android404 said:
Looks very interesting. Do you know in how far this might conflict or work with other, similar modules and/or on certain phones and android versions? Specifically I'm on an lg g2 with xblast installed and without a working recovery, and i don't want to risk a bootloop.
Click to expand...
Click to collapse
themadproducer said:
Even easier...
I have a file named "Xposed-Disabler-cwm.zip" on my sd card. (I believe I downloaded it along with the main Xposed app)
If, due to a module, I get into a boot loop issue etc., which I have...then I simply boot into recovery (without a pc) and run this zip. Boom. All modules are temporarily disabled. :good:
Click to expand...
Click to collapse
Lol. They posted the manual "recovery" for a reason Lol.
Sent from my XT926 using Tapatalk 4
motodroidfreak said:
Lol. They posted the manual "recovery" for a reason Lol.
Sent from my XT926 using Tapatalk 4
Click to expand...
Click to collapse
Yes indeed.
Realized that later.
totally sweat. any link to apk?
Sblast said:
totally sweat. any link to apk?
Click to expand...
Click to collapse
Yes, in the 1st post is a link to Xposed Repository. There is a direct linkt to download the apk - or just use xposed installer itself to download
Sadly it does not seem to work.
Log shows all recent Notifications but nothing shows up in the main window.
Running AOKP 4.2.2 by Maclaw on a S3 Mini
All other Xposed Stuff works fine.
[Edit]
Disregard it. Actually rebooted twice when i wrote this. After a third reboot its working now
Great App, thanks a lot.
Works like a charm. Thanks for the module.
I would tend to want the red color for ALL, and something "weaker" for individual notifications.
schneidebrett said:
Sadly it does not seem to work.
Log shows all recent Notifications but nothing shows up in the main window.
Running AOKP 4.2.2 by Maclaw on a S3 Mini
All other Xposed Stuff works fine.
[Edit]
Disregard it. Actually rebooted twice when i wrote this. After a third reboot its working now
Great App, thanks a lot.
Click to expand...
Click to collapse
Different sources for both
1) The log entries are taken from debug.log of xposed
2) The database with notifications is updated by the hook every time a new one is detected (no more write access as needed), the app itself reads the file.
But the app has to create the file to get the app's permissions&owner, the hook does not creates it because the app could not read it later due to missing permissions. So the new notifications could not written, but are logged.
I add it to the 1st post
When removing the notification does it remove the service or just the icon in the task bar?
Will android close the app when it needs memory or will the app stay open like when the icons are showing in the task bar?
I wanted to use the module to remove the notification of "No Sim card" (I am currently using N8000 without a sim) it's found in the system ui notifications but when i select it and reboot nothing happens but then i restart system ui and the notification is gone
But when i select it and custom design then reboot it works but i dont know if this would disable other notifications.... .. so What's the problem?!
yeeahnick said:
When removing the notification does it remove the service or just the icon in the task bar?
Will android close the app when it needs memory or will the app stay open like when the icons are showing in the task bar?
Click to expand...
Click to collapse
Technical the app calls the function to create a notification, but this call never reches the system.
I'm using a other app by me named "KeepRunning" to restart crashed/closed apps. I've oberserve also some apps which are configured to not show notification. The logfile of KeepRunning tells me that during the last week only Whatsapp was several times was restarted, but this has no restricted notifications.
So i *think* the apps are not closed by Android. Btw, i the worst case Android closed any app, regardless of services or nifications
Scorpion_Ibm said:
I wanted to use the module to remove the notification of "No Sim card" (I am currently using N8000 without a sim) it's found in the system ui notifications but when i select it and reboot nothing happens but then i restart system ui and the notification is gone
But when i select it and custom design then reboot it works but i dont know if this would disable other notifications.... .. so What's the problem?!
Click to expand...
Click to collapse
Xposed framework has not function to get a "Context"
To get the texts of a notification a "Context" is required
So the module searches for a context to read the notification.
Now the "system ui" starts very early and at this point it seems a context is not yet available and the notification is detected as "text not readable" and the app shows it as "custom design" :-/ If later a context is available notifications of system ui are read correct.
So i think it thould be okay to disable custom design for system ui to get rid of "no sim" notification
You could simple recognize a real custom design of notifications. The app "My Data Manager" uses such a one for notifications, i've attached a screenshot and marked it
You could enable the full logging by creating a empty file /data/data/de.defim.apk.notifyclean/files/NotifyClean.logging , a reboot is required to take effect. Be warned, it could slow down your device, so enable it not all the time
Extra protection for your apps
With this app you could protect app with a password, PIN or pattern. The Android lockscreen is used for that. The protection could not be removed with a simple long press on back-button, like with most other apps. You could even protect not straight startable apps eg the package-installer.
Donation: You could select a unlimited count of apps.
TouchWiz users (most Samsung devices): Please enable in settings the compat mode BEFORE reboot the device with enabled module!
Features:
All features are supported since Android 4.2. With older versions not supported options are hidden in the settings.
Different observation modes: First start of apps or while using it
Duration of unlock time configurable
Autmatic locking could be switched off.
Notification options: Always, while unlocked, never
Duration of unlock could be configured
Pre-lock slider could be disabled for app unlocking
Minimal and maximal time frame of unlocking configurable
Examples:
The device is protected by slider, protected apps with a PIN
The device is protected by slider and PIN+TimePIN, protected apps with pattern
Or you could use custom unlock mehtods without the keyguard:
Crash report
Knock Code
Pattern
PIN
Password
Recommendation:
For extreme protection select these apps:
Play Store (install/remove apps)
Xposed Installer (enable/disable modules)
Package-Installer (install/remove apks)
Settings (Android system settings)
ProtectedApps (configure protected apps)
WARNING: Please configure and check ProtectedApps with other apps before!
Coloring:
YELLOW: System app, could be started by launcher.
YELLOW+BLUE: System app, not straight startable.
BLUE: User app, not straight startable.
Donator:
No self-promotion in the app.
More than 5 apps could be selected.
You support this app and further development!
Permissions:
DEVICE_ADMIN: Lock device (required)
BOOT_COMPLETE: Show persistent notification (optional)
Modules reported not correct working with this app:
DS Battery saver
Lockscreen disabler
This app does not connect itself to any websites or hosts!
Important:
This app needs the Xposed Framework. The framework requires root access for installation. Don't forget to enable the module in Xposed. You can grab it here: Xposed Installer
Website: http://tinyurl.com/lfw2pdu
Play Store: http://tinyurl.com/lp4fn99
Xposed Repository: http://tinyurl.com/oxdejr9
Changelog: http://tinyurl.com/of6gvex
Why this app? Killing "protection" by long touch on back button could be optimized
Translation:
You could find here a interface to translate the english strings: http://tinyurl.com/okycacj
A free account of www.oneskyapp.com is required to edit. Additional, please attach your email address or send it via PM
waited along for this... Awesome...!!!
NeroD said:
waited along for this... Awesome...!!!
Click to expand...
Click to collapse
I hope you like it, it's the way i think its easy to protect apps
@badkill @pesiran @RBDoMGaM @supergonkas @pugsang @undaclazz
Maybe you want translate it
defim said:
I hope you like it, it's the way i think its easy to protect apps
@badkill @pesiran @RBDoMGaM @supergonkas @pugsang @undaclazz
Maybe you want translate it
Click to expand...
Click to collapse
Done for Portuguese (europeu)
mauam said:
Done for Portuguese (europeu)
Click to expand...
Click to collapse
Thanks, attached an apk with translations. Pleas PM me your email
Bootloops galaxy s5 stock
Sent from my SM-G900T using XDA Premium 4 mobile app
Good Job...
But have a problem , for relock app's must pulldown status bar and touch notification of your app till lock apps...
pls add options for relouck app when close app,..
Great app
Even though it might compromise security, could you add an option to disable locking while in home Wi-Fi net (or BT etc)? Or add a Tasker shortcut to do so?
Thanks a lot!
chw9999 said:
Great app
Even though it might compromise security, could you add an option to disable locking while in home Wi-Fi net (or BT etc)? Or add a Tasker shortcut to do so?
Click to expand...
Click to collapse
I think Tasker Support is better, so could many events beused. What about that: PA accept a broadcast, it contains
1) "mode" extra: protect apps, unlock forever and maybe unlock apps for the duration set in settings
2) "password" extra: In the settings could be a password defined and tasker has to add it to the broadcast. So not every app could send a broadcast.
ahrion said:
Bootloops galaxy s5 stock
Click to expand...
Click to collapse
Can you attach a logcat and logfile of Xposed?
Farshid-Iran said:
Good Job...
But have a problem , for relock app's must pulldown status bar and touch notification of your app till lock apps...
pls add options for relouck app when close app,..
Click to expand...
Click to collapse
That's not so easy, android does not "closes" apps, it "pauses" them. Eg if you hit HOME button while an app is open it is paused. Therefore is in the menu of PA an "exit" item.
You could get ~~ what you want if you set the oservation method to "create" and the unlocked time to it's minimum (its 30 atm)
defim said:
I hope you like it, it's the way i think its easy to protect apps
@badkill @pesiran @RBDoMGaM @supergonkas @pugsang @undaclazz
Maybe you want translate it
Click to expand...
Click to collapse
Spanish translation is complete, thanks for another great module :good:
defim said:
I think Tasker Support is better, so could many events beused. What about that: PA accept a broadcast, it contains
1) "mode" extra: protect apps, unlock forever and maybe unlock apps for the duration set in settings
2) "password" extra: In the settings could be a password defined and tasker has to add it to the broadcast. So not every app could send a broadcast.
Click to expand...
Click to collapse
Wohoo, that would be cool [emoji1]
Right now i have a tasker event to lock apps when away from home, but it's not a really save option.your method should be more reliable.
Thanks again!
great work.
Was looking for the same.
Thank you dev. keep it up. tipped for portal.
ahrion said:
Bootloops galaxy s5 stock
Click to expand...
Click to collapse
I also got bootloop with s5. Got by any change a fix without restoring backup or reinstall rom?
Tried wipe dalvik cache and cache but no luck
Nice to hear that you're going to integrate with Tasker to control app protection.
Any plans to support app grouping so we can lock/unlock groups of certain apps depending on (Tasker-)context?
Does not work on my Galaxy S4 I9505 with Android 4.4.2 when selected an application is not saved in the list of selected applications.
cramu said:
Nice to hear that you're going to integrate with Tasker to control app protection.
Any plans to support app grouping so we can lock/unlock groups of certain apps depending on (Tasker-)context?
Click to expand...
Click to collapse
I'm not sure which way, have to thing about it. But at first some bugfixes.
soesie said:
I also got bootloop with s5. Got by any change a fix without restoring backup or reinstall rom?
Tried wipe dalvik cache and cache but no luck
Click to expand...
Click to collapse
You could disable whole xposed with pushing five times a hardware key during boot. After that you have to enable it again in installer! Can you get before that a logcat and attach?
badkill said:
Spanish translation is complete, thanks for another great module :good:
Click to expand...
Click to collapse
Thanks, i'll atach a translated apk late. In case you forgot: The old unlocker should still work
badkill said:
Does not work on my Galaxy S4 I9505 with Android 4.4.2 when selected an application is not saved in the list of selected applications.
Click to expand...
Click to collapse
Please check that the folder "files" was created in /data/data/de.defim.apk.protectedapps. There should be also "cache" and something with shared-preferences. There was with another app also the case the "files" was not created, this should be done by android while installing the app. If you create it by yourself, set the same user&permissions like "de.defim.apk.protectedapps" has
bugs/suggestions
If there is no lock screen set for the phone then protected apps are impossible to open. Further if there is no lock screen set for the phone then it is also impossible to set a different locking method for protected apps and different methods that were set when the phone did have a lock screen stop working when the lock screen is removed.
So suggestion would be to make a way for your app to work even if the user has screen lock set to "None".
Kagoshema said:
bugs/suggestions
If there is no lock screen set for the phone then protected apps are impossible to open. Further if there is no lock screen set for the phone then it is also impossible to set a different locking method for protected apps and different methods that were set when the phone did have a lock screen stop working when the lock screen is removed.
So suggestion would be to make a way for your app to work even if the user has screen lock set to "None".
Click to expand...
Click to collapse
Thanks for reporting, i had not considered that case... Should be fixed in attached file (dont forget to reboot, the app reminds only if version code changed)
@badkill: Also translation included
defim said:
Thanks for reporting, i had not considered that case... Should be fixed in attached file (dont forget to reboot, the app reminds only if version code changed)
@badkill: Also translation included
Click to expand...
Click to collapse
Nice quick fix. I'll give it a test.
Tested:
Looks good. Minor detail; in settings under "method to unlock apps" if "Don't change" is selected then the checkbox "Use a custom patter/PIN/password" does nothing. I'll probably play around more but you've got my donation.
Also: in settings what is the difference between the "time after which a new unlocking is requested"(self explanatory) and "minimal/maximal duration of unlocking"?
Really nice mod. Is it possible to evolve it so that you can have protection for selected operations on the device? Demand pin for deleting SMS or whatever the user choose to protect..?
Sent from my A9500 using XDA Premium 4 mobile app
This module disables the transition to Ambient Mode on Android Wear so watch faces keep rendering images (once a minute) in full colored mode instead the usual plain, black & white ambient mode. The watch still goes to sleep (screen updating Handlers are suspended). It allows you to fully enjoy all the beautiful watch faces (both stock and 3rd party).
Battery life: There isn't any noticeable battery drain. With Always-on screen, the watch can still survive 2 whole days. See attached screenshot of a test when battery went during 11 hours from 100% to 78% (few notifications, Tilt to wake disabled, lowest screen brightness on LG G Watch).
Screen burn in: It's not a good idea to use this module with OLED.
Requirements:
Root (su binary on watch)
xposed-arm-20150308.zip flashed through recovery
Adb/developer mode enabled (to install apps directly)
Yes, Xposed framework also works on Android Wear, check my comment for details.
The modded version of Xposed Installer is the same as XposedInstaller_3.0-alpha2.apk, just with few Wear incompatible GUI parts disabled making it launchable on Wear. Because of disabled Action Bar, it's not possible to configure Xposed directly and installation below is required. (If you are familiar with UI coding, universal UI redesign would be helpful. So far I only did smali edits to Xposed Installer but I may try some proper workarounds/fixes later.)
Installation:
Install modded Xposed Installer (1_install_xposed_installer.bat)
Run Xposed Installer
Close Xposed Installer
Reboot watch
Run 2_enable_module.bat
Install this module (3_install_xposed_module.bat)
Wait for Xposed notification and tap to do soft reboot
Current bug/drawback:
Manually opened/expanded notifications do not hide (screen doesn't refresh) after a timeout.
Source: https://github.com/moneytoo/RichAmbient
Nice idea but all is white and cannot read inside xposed
hanschke said:
Nice idea but all is white and cannot read inside xposed
Click to expand...
Click to collapse
That's why:
Because of disabled Action Bar, it's not possible to configure Xposed directly and installation below is required.
Click to expand...
Click to collapse
I have thought thats the mod apk do
That requires bit more changes and it's not done yet.
Awesome work, been looking for this ever since I got my G Watch!! Ambient mode is pointless on LCD based watches anyways.
@moneytoo
Hi,
can you create a module "shake to wake" instead of "tilt to wake"?
regards
starbase64
starbase64 said:
can you create a module "shake to wake" instead of "tilt to wake"?
Click to expand...
Click to collapse
I think I would use something like this as well. If I'm looking at it right, it's in com.google.android.clockwork.home.mr1compat.TiltDetectorService and modifying seems doable so I may try it later.
I tried installing this on 5.1.1 but it does not appear to work. Not sure if this is Xposed problem (using unofficial 5.1 Xposed) or this module's problem. Is there a way to check if module got actually loaded (logcat)?
Deleted
What smali changes did you have to make to the apk to get it to run? I want to try and make the to an xposed installer for 5.1.1
Justjusten said:
What smali changes did you have to make to the apk to get it to run? I want to try and make the to an xposed installer for 5.1.1
Click to expand...
Click to collapse
I fixed what showed crashing in logcat. Or decompile both original and patched apks and run diff...
Thanks, I didn't know if there was something I would miss that you could give me a head ups on but sounds pretty straight forward.
tested on sony smartwatch 3 on android 5.1.1, using v68 sdk22 xposed framework, using your modded xposed installer, rooted with supersu 2.46
not working.. still fade to ambient
Hi @moneytoo, just curious, are you still using this?
I got xposed to work - I had to install xposed-v80-sdk22-arm.zip since the Android OS is 5.1.1 - I then followed your process to install XposedInstaller_3.0-alpha2.apk and RichAmbient.v0.1.apk.
Doesn't seem to work for me on Smartwatch 3 though!
thanks,
Charlie
moneytoo said:
Screen burn in: It's not a good idea to use this module with OLED.
Click to expand...
Click to collapse
Sorry for dumb question - does this include AMOLED? Thanks.
AppOpsXposed Re is a module for the Xposed framework that restores AppOps functionality on recent Android versions.
"Re" (short for "revised") version got a few updates compared to the original, making it work on newer Androids, like Nougat and Oreo.
Original thread by caspase: AppOpsXposed - AppOps for 4.3+
What is AppOps? What's the difference between AppOps and permissions?
AppOps is a feature that is included in Android starting with JellyBean 4.3. It allows the user to limit an apps functionality, regardless of permissions granted; for example, you can prevent an app from reading your contact list, or accessing your current location. The difference between revoking permissions and using AppOps is that in the latter case, the affected app will not know what happend and, most importantly, will (usually) not crash. In the case of the location, the app will think that the location is currently unavailable. In the case of your contact list, the app will see an empty list.
An important thing to keep in mind is that AppOps was not intended for end-users, so some features do not work as advertised. Limiting "Keep awake" for example has no effect, as this was not implemented by the Android developers.
Compatible with all Android versions from 4.3 'Jelly Bean' to 9.0 'Pie'.
Credits:
Xposed Framework: rovo89 & Tungstwenty
Original module: caspase
Download: AppOpsXposed Re on Xposed Module Repository
How to report problems efficiently?
- Enable the Debug log in settings
- Use functions that don't work as intended
- Export the logs from Xposed app and put them on PasteBin
- Post on the XDA thread the link along with more information about your device
XDA:DevDB Information
AppOpsXposed Re, Xposed for all devices (see above for details)
Contributors
Xspeed, caspase
Source Code: https://github.com/XspeedPL/AppOpsXposed
Xposed Package Name: at.jclehner.appopsxposed.re
Version Information
Status: Stable
Current Stable Version: 1.30.6
Stable Release Date: 2019-03-09
Created 2018-08-10
Last Updated 2019-03-08
you rock dude. I had to settle for my 2nd favorite rom for my daily driver bc it had no AppOps. Now I'm free!!! when I get time I will flash back and give this a try.
Thanks for sharing!!!!
Hey, thanks for your work (even though I'm still on Nougat).
I have three questions though:
- when I go into an app's persmissions screen the sliders in 1.30.4 turned green when turned on and grey when off. In 1.30.5 they're always grey, can this be modified so they change color depending on how their status is?
-also in an app's permission screen, the name of each permission was differently formated and translated in 1.30.4. Could this be ported over to your version of AppOps?
-the next thing didn't work with 1.30.4 either but maybe it can be fixed (or my phone simply isn't compatible), when I go to designs and change the icons of AppOpsXposed, none of them changes in the phone's settings / app overview screen.
I have some screenshots attached. My phone is the HTC 10 on Nougat, regularly rooted
sutobe said:
- when I go into an app's persmissions screen the sliders in 1.30.4 turned green when turned on and grey when off. In 1.30.5 they're always grey, can this be modified so they change color depending on how their status is?
Click to expand...
Click to collapse
It's really easy to change, I am experimenting with colors at the moment.
When I was releasing this I prioritized functionality over looks, but it will be done, no worries.
-also in an app's permission screen, the name of each permission was differently formated and translated in 1.30.4. Could this be ported over to your version of AppOps?
Click to expand...
Click to collapse
I am aware of that, the labels got messed up when I was porting the code base. I'll see what can be done.
-the next thing didn't work with 1.30.4 either but maybe it can be fixed (or my phone simply isn't compatible), when I go to designs and change the icons of AppOpsXposed, none of them changes in the phone's settings / app overview screen.
Click to expand...
Click to collapse
It actually works like the previous version. To see those changes you can either reboot or restart the "UI" process.
To make it work auto-magically a lot more work would be needed, and to be honest, for a single time use feature it's not worth it in my opinion.
It works
But after disabling some ops (permissions) those apps on going notification don't show the notification bar although they're running in the background.
But if i revert it then the notification shows
FC after start at HTC One M7 with Android 5 ROM
Sent from my HTC One using XDA Labs
Nice this cutie is now offical.
Used your inoffical mod since oh my gosh ..long time ago...about a year
on LP, MM, Nougat
:good:
Awww yeah!... Thankyou for this!
Auto close app everytym when i open :/
Mockingbird_ said:
Auto close app everytym when i open :/
Click to expand...
Click to collapse
How to report problems efficiently?
- Enable the Debug log in settings
- Use functions that don't work as intended
- Export the logs from Xposed app and put them on PasteBin
- Post on the XDA thread the link along with more information about your device
Click to expand...
Click to collapse
Maybe try caspase appsops.
For me it works now better with my nougat device. Better permisson controll* and less errors on apps with blocked permissions :good:
*possible to block audio focus on music, video, notification
Hi! What's the difference of this and the appopsxposed without the "re"?~
nijihana said:
Hi! What's the difference of this and the appopsxposed without the "re"?~
Click to expand...
Click to collapse
Original module was supposedly abandoned. This version was updated to support newer Androids, including Nougat and Oreo.
"Re" is short for "revised".
Xspeed said:
Original module was supposedly abandoned. This version was updated to support newer Androids, including Nougat and Oreo.
"Re" is short for "revised".
Click to expand...
Click to collapse
Thank you!
Any chance blocking apps permission to change system settings?
A language file for translation would be nice
edit:
Now i see modul can block "write system" e.g. it can denin on playstore / service but some apps still
change system ( froce app to run in backround) after install an update.
So if an app has no permission to write system how it can change settings even if i denin playstore & service permisson to change system? ^^^^
This app is broking the item "Fingerprint scanner" in the settings of phone. I get FC when I try to open it. My phone is HTC U11, Adrroid 8.0, ROM LeeDroid.
@Xspeed: 'Add OP_BOOT_COMPLETED' in the hacks menu still doesn't work after checking the box and rebooting, there is no option anywhere to control whether an app can start on boot. I'm running a pure AOSP ROM so there is no Privacy Guard, etc. Is there a workaround/fix for this?
Thanks!
@Xspeed Just curious, what are the chances of this getting updated for Pie?
toBsucht Psp said:
Now i see modul can block "write system" e.g. it can denin on playstore / service but some apps still
change system ( froce app to run in backround) after install an update.
So if an app has no permission to write system how it can change settings even if i denin playstore & service permisson to change system? ^^^^
Click to expand...
Click to collapse
What settings is the app changing after you disabled the permission?
smallKING81 said:
This app is broking the item "Fingerprint scanner" in the settings of phone. I get FC when I try to open it. My phone is HTC U11, Adrroid 8.0, ROM LeeDroid.
Click to expand...
Click to collapse
I am going to need LogCat during the FC from you to be able to see what's exactly wrong.
AnonVendetta said:
@Xspeed: 'Add OP_BOOT_COMPLETED' in the hacks menu still doesn't work after checking the box and rebooting, there is no option anywhere to control whether an app can start on boot. I'm running a pure AOSP ROM so there is no Privacy Guard, etc. Is there a workaround/fix for this?
Click to expand...
Click to collapse
This boot run blocking is actually a hack that works only on some devices, to be honest it doesn't work on mine either
bkkzak said:
@Xspeed Just curious, what are the chances of this getting updated for Pie?
Click to expand...
Click to collapse
If you mean EdXposed, you're unfortunately out of luck. This module HEAVILY relies on so called "resource hooks" that EdXposed doesn't support at the moment. Sorry
What is the difference between this app and AppOpsX from F-Droid? does it work on Android Pie?
MDV106 said:
What is the difference between this app and AppOpsX from F-Droid? does it work on Android Pie?
Click to expand...
Click to collapse
To be honest I've never heard of AppOpsX. The two applications work completely different under the hood.
There is stuff non-Xposed apps can't do, like adding a shortcut to AppOps on the app details activity.
Regarding your second question, YES!
The fresh new 1.30.6 version supports Android 9.0 Pie and EdXposed.
I managed to make it work by separating resource hooking related stuff to a second module and made it optional for other functionality.
Simple? Absolutely. Clever? Maybe. AppOps? Xposed. Sorry :/