WARNING
Strictly for users with Z3 D6653/D6603/D6633 UNLOCKED BOOTLOADER ONLY
STATUS : SAFE & STABLE | TESTING OTHER VARIANTS COMPATIBILITY
RISK PREVENTION
Make sure you have stock FTF / kernel image to revert/recover from any disaster
USAGE
1- Copy latest SuperSU package to internal storage
2- Boot into fastboot mode
-- Power off > hold vol up button + connect USB cable = blue LED indicator on
3- Execute fastboot command prompt : fastboot flash boot <kernel_name.img>
-- e:g fastboot flash boot bootZ3monxtest01.img
4- Reboot & try entering recovery by pressing vol up / vol down repetitively until booting into recovery
5- Flash latest SuperSU zip package
PLEASE PROCEED AT YOUR OWN RISK
KERNEL IMAGE D6653 / D6603 23.0.1.A.5.77
D6603_23.0.1.A.5.77.img - 12.76 MB
KERNEL IMAGE D6653 / D6603 23.0.A.2.105
D6603_23.0.A.2.105.img - 12.75 MB
KERNEL IMAGE D6653 / D6603 23.0.A.2.93
bootZ3monxtest01.img - 12.75 MB
KERNEL IMAGE D6633 23.0.F.1.74
bootZ3dualmonxtest01.img - 12.75 MB
REPORTING
1- Please make sure your device is Xperia Z3 D6653/D6603/D6633 bootloader unlocked
2- Please specify failure stage : e:g - not booting at all, whether got vibrates, whether can enter recovery, followed by other info(s)
RECOVERING DEVICE FROM ANY DISASTER
Boot failure, etc.
1- Detach USB cable
2- Press power + vol up until 3 vibes
3- Run flashtools > flash stock kernel from stock FTF using standard procedures.
thanks : DennisDD78 / kerman19 / lcheng / everybody
credits : [NUT] / Chainfire / Dees_Troy / others (please PM me to include your name if I forgot)
reserved
reserved 2
Thanks monx, great to see you are supporting the Z3 !
D6603
Future support for D6603? ☺
Anyone tried ?
Danish2980 said:
Future support for D6603? ☺
Click to expand...
Click to collapse
yes. still waiting feedback from D6653 user
DennisDD78 said:
Anyone tried ?
Click to expand...
Click to collapse
so far only one fella spotted hv unlocked bootloader. n he not online yet
monx® said:
yes. still waiting feedback from D6653 user
so far only one fella spotted hv unlocked bootloader. n he not online yet
Click to expand...
Click to collapse
Well, i can test, what if the phone will boot, and will enter recovery and after SuperSU flashing will boot and work fine, can this kernel be use for every day ?
---------- Post added at 10:20 AM ---------- Previous post was at 10:19 AM ----------
And, is there possibly to kill the phone forever with this test kernel or not ?
DennisDD78 said:
Well, i can test, what if the phone will boot, and will enter recovery and after SuperSU flashing will boot and work fine, can this kernel be use for every day ?
---------- Post added at 10:20 AM ---------- Previous post was at 10:19 AM ----------
And, is there possibly to kill the phone forever with this test kernel or not ?
Click to expand...
Click to collapse
yes it can be used for everyday use bcos
the zImage is purely stock.
It wont damage the phone bcos only boot partition is being flashed. it can be recovered easily by flashing stock kernel from stock ftf.
Looks like we have root for unlocked bl Everything, looks like, working fine.
Please, sorry for the non english language screenshots.
Sent from my D6603 using XDA Free mobile app
I have a D6633. Are you going to release a D6633 version? I can be the tester if you want.
Big thnks to YOU!
I will use your kernel for every day, and will see, if there any errors, i`ll report.
DennisDD78 said:
Big thnks to YOU!
I will use your kernel for every day, and will see, if there any errors, i`ll report.
Click to expand...
Click to collapse
Thanks alot mate! prev post was replied using wrong xda id
Frm ur sshot, i can see ur device is D6603. pls confirm. means it works for other variants as well.
monx®xda
¯\_(ツ)_/¯
lcheng said:
I have a D6633. Are you going to release a D6633 version? I can be the tester if you want.
Click to expand...
Click to collapse
please provide kernel .sin file frm ur stock rom. I cant dload much w very limited bandwidth.
monx®xda
¯\_(ツ)_/¯
monx® said:
please provide kernel .sin file frm ur stock rom. I cant dload much w very limited bandwidth.
monx®xda
¯\_(ツ)_/¯
Click to expand...
Click to collapse
May I know the path of .sin file?
lcheng said:
May I know the path of .sin file?
Click to expand...
Click to collapse
U can unpack ur stock ftf file. look for file named kernel*.sin sized ard ~9.3MB.
But u can try flashing boot image provided in this thread 1st as frm i can see DennisDD78 device is D6603. but safest is by providing ur stock boot. im not sure if Z3 Dual has slight diff kernel.
monx®xda
¯\_(ツ)_/¯
I can`t get, existing kernel version is for 6603 or 6653 ?
monx® said:
U can unpack ur stock ftf file. look for file named kernel*.sin sized ard ~9.3MB.
But u can try flashing boot image provided in this thread 1st as frm i can see DennisDD78 device is D6603. but safest is by providing ur stock boot. im not sure if Z3 Dual has slight diff kernel.
monx®xda
¯\_(ツ)_/¯
Click to expand...
Click to collapse
Thanks. I will try this D6653 kernel first. Then send you the .sin file later. I am downloading the ftf.
DennisDD78 said:
I can`t get, existing kernel version is for 6603 or 6653 ?
Click to expand...
Click to collapse
D6653. maybe u can send me ur stock kernel sin file as well so i can check whether identical or not.
monx®xda
¯\_(ツ)_/¯
monx® said:
D6653. maybe u can send me ur stock kernel sin file as well so i can check whether identical or not.
monx®xda
¯\_(ツ)_/¯
Click to expand...
Click to collapse
I attached D6603 kernel. Please, tell, may i use your kernel or should i use the mystock kernel ?
Related
Hi my friend... i really want to see how aosp based rom will run on our phone
This is a simply port of devianxone rom builded by $droyds$ for the tmo version with a kernel compiled by me from intervirgilium github.
1- set up the TWRP
2- reboot in recovery ( will start fastboot ) and boot into recovery;
3- make a backup;
4- factory reset;
5- install the rom zip from sdcard ( where you must had copy the rom );
6- reboot recovery ( so you will be again in the fastboot mode);
7- do this:
Code:
fastboot boot boot.img
8- enjoy the speed
all credits go to @$Droyds$ for the rom and to intervigilium for the kernel source
DONATE to @$Droyds$ for his work
Download the ROM
Download the kernel
The rom is still bugged so don't report anything, it's just for testing purpose.
O.O don't you need the bootloader unlocked ?
Hey! is it for D855 or F400x?
CheesyNutz said:
O.O don't you need the bootloader unlocked ?
Click to expand...
Click to collapse
yes... this is why you need fastboot to boot
Kniazkoff said:
Hey! is it for D855 or F400x?
Click to expand...
Click to collapse
D855 only
Would be nice to have the recovery package.
Verstuurd vanaf mijn LG-D855 met Tapatalk
I never us fastboot,but i want to flash this rom and kernel.is it a dangerous,can i messed up something?
Skin1980 said:
yes... this is why you need fastboot to boot
D855 only
Click to expand...
Click to collapse
Thanks for providing this rom for the G3 community.
For the sheer sake of security, it would be better to add to the title the model this rom is intended to.
This way there will be les confusion among the users, particularly those who don't read the entire thread.
Thanks
juliocesar55 said:
Thanks for providing this rom for the G3 community.
For the sheer sake of security, it would be better to add to the title the model this rom is intended to.
This way there will be les confusion among the users, particularly those who don't read the entire thread.
Thanks
Click to expand...
Click to collapse
you are right... i'm going to do it
oska3 said:
I never us fastboot,but i want to flash this rom and kernel.is it a dangerous,can i messed up something?
Click to expand...
Click to collapse
If you follow the guide on the TWRP thread i linked you can make a backup and, after the test, restore everything.
Wow ?
@Skin1980 just copy my thread and change for your device.. Be sure to be as detailed as you can on install.. We need to talk cause if you can explain to me what you changed for d855 and this is a legitimate flash method I can source it and get some support out for you.. Pm me your hangout info and I'll hit you up after I wake up..
You'll need to re port tonight I've got a lot of fixes in the next build.
$droyd$ said:
@Skin1980 just copy my thread and change for your device.. Be sure to be as detailed as you can on install.. We need to talk cause if you can explain to me what you changed for d855 and this is a legitimate flash method I can source it and get some support out for you.. Pm me your hangout info and I'll hit you up after I wake up..
You'll need to re port tonight I've got a lot of fixes in the next build.
Click to expand...
Click to collapse
Could you upload the package or mirror it
Verstuurd vanaf mijn LG-D855 met Tapatalk
$droyd$ said:
@Skin1980 just copy my thread and change for your device.. Be sure to be as detailed as you can on install.. We need to talk cause if you can explain to me what you changed for d855 and this is a legitimate flash method I can source it and get some support out for you.. Pm me your hangout info and I'll hit you up after I wake up..
You'll need to re port tonight I've got a lot of fixes in the next build.
Click to expand...
Click to collapse
I have issue with wifi... when i fix it i will contact you.
Skin1980 said:
I have issue with wifi... when i fix it i will contact you.
Click to expand...
Click to collapse
you have it instaled in a d855 international with bootloader? or t-mobile free bootloader?
limdnas said:
you have it instaled in a d855 international with bootloader? or t-mobile free bootloader?
Click to expand...
Click to collapse
Locked bootloader
Sent from my LG-D855 using XDA Free mobile app
"You'll need to re port tonight I've got a lot of fixes in the next build."
waiting patiently... will surely try the next build
way to my G3…. waiting to open…. splash screen now….
Worked but, touchscreen stopped working, and then I pull off battery, and now I can't boot to recovery. :x
EDIT: boot certification verify, error ;x
EDIT2: Fixed entering in Recovery Mode ( Volume DOWN + Power Button, since LG Logo appears, than release and press anothertime until recovery), so can bootup.
All working, hope fixing the wifi problem, and making it as taste as CM11 with luncher and other apps.
and we need to flash Gapps.
WiFi.. That's an easy fix.. I'll pm you how..
Stock zImage
Add features:
TWRP recovery 2.8.6.0 (vol down)
Init.d suport
RIC disabled
Debugging enabled by default
Disable debugging notification icon in the status bar
Kernel insecure (ro.secure=0)
Ramdisk totally new from 23.1.A.1.28
* Required Bootloader Unlocked!
* For D6603-D6643-D6653
* Installation:
Flash via recovery or via fastboot
* Please, do not mirror!
Download:
Advanced stock Kernel Z3 Lollipop 23.1.A.1.28
Enjoy and press the Thanks button if you like! :good:
You should tell people it doesn' t work on .690
Most users have this firmware.
Anyway good job.
Gustavo RD78 will it work with 23.2.A.1.62 ?
TheTeslaCoil said:
You should tell people it doesn' t work on .690
Most users have this firmware.
Anyway good job.
Click to expand...
Click to collapse
I need not say, because each kernel is assigned to each rom, so if the kernel is .28 is suitable. 28 for rom!
test due at risk, since the chance of something is minimal
sekac55 said:
Gustavo RD78 will it work with 23.2.A.1.62 ?
Click to expand...
Click to collapse
I think yes so, go ahead and tell me if any problem, okay?
I can create a to 62 ?
Gustavo RD78 said:
I need not say, because each kernel is assigned to each rom, so if the kernel is .28 is suitable. 28 for rom!
test due at risk, since the chance of something is minimal
I think yes so, go ahead and tell me if any problem, okay?
I can create a to 62 ?
Click to expand...
Click to collapse
Yes, like no signal.
---------- Post added at 21:53 ---------- Previous post was at 21:53 ----------
I use my own kernel on the latest firmware which is pretty good.
Can i still install DualRecovery again after flashing your ROM? Can you add a ZIP without Recovery included?
Gustavo RD78 said:
I need not say, because each kernel is assigned to each rom, so if the kernel is .28 is suitable. 28 for rom!
test due at risk, since the chance of something is minimal
I think yes so, go ahead and tell me if any problem, okay?
I can create a to 62
Click to expand...
Click to collapse
awaiting your advanced stock kernel for 23.2.A.1.62!
---------- Post added at 11:03 AM ---------- Previous post was at 11:03 AM ----------
sekac55 said:
Gustavo RD78 will it work with 23.2.A.1.62 ?
Click to expand...
Click to collapse
wonder hav u tried it already?
Working like charm, thank you very much
redlabour said:
Can i still install DualRecovery again after flashing your ROM? Can you add a ZIP without Recovery included?
Click to expand...
Click to collapse
this is not a rom, is a kernel and has integrated recovery
chunlianghere said:
awaiting your advanced stock kernel for 23.2.A.1.62!
---------- Post added at 11:03 AM ---------- Previous post was at 11:03 AM ----------
wonder hav u tried it already?
Click to expand...
Click to collapse
No concrete answer yet ...
.62 soon
Richard_10 said:
Working like charm, thank you very much
Click to expand...
Click to collapse
Thanks!
DRM fix
anyone tried this with the DRM fix after?
I suffer from a huge battery drain. Does anyone have this issue ?
machadofe said:
anyone tried this with the DRM fix after?
Click to expand...
Click to collapse
yes, working
Richard_10 said:
I suffer from a huge battery drain. Does anyone have this issue ?
Click to expand...
Click to collapse
this is not related to this kernel
I'm gonna try with .62. Will update!
Edit: It definitely works
any change to get OC/UV?
I would like to try if UV increases battery life.
LeParkour012 said:
I'm gonna try with .62. Will update!
Edit: It definitely works
Click to expand...
Click to collapse
Yes works great, some people gave false feedback about it
thank you
metuskale said:
any change to get OC/UV?
I would like to try if UV increases battery life.
Click to expand...
Click to collapse
not this kernel ...
... I'm thinking of releasing a custom kernel with extra features...
Thanks man, works great on D6603 Rogers Wireless CA v23.1.A.1.28 (Lollipop)
At the moment we have rather dfficult situation because custom ROMs based on AOSP (such as my AD which is not yet public) require previous OOS LP firmware, while OOS 3.0 includes new MM firmware which breaks both older recoveries and custom ROMs.
As I need to switch between OOS 3.0 and my AD quite frequently, I created two helpful flashable zips so I can do that easily, and because it's useful for me, perhaps it'll be useful for you too.
Download: MM | LP
Instructions:
- Download the firmware you want (or both, if you want easy switching)
- Unpack downloaded zip, you'll find firmware-update.zip and recovery.img inside
- Put both of those files on your phone, in appropriately named directory such as "firmware-LP" or "firmware-MM"
- When you will need to do a switch, simply firstly flash firmware-update.zip, then flash recovery.img as recovery image via "flash image" option in TWRP
- Reboot to load new firmware
That's it, this way you firstly flash chosen firmware version, and then TWRP recovery that works with it.
So if you have two TWRP backups - one of OOS 3.0 and one of CM13.0, make sure that you have proper firmware (and recovery) after restoring backup - LP for CM13.0, and MM for OOS 3.0.
Situation should soon improve (when OnePlus pushes kernel sources, and MM-based ROMs will rebase), but until then it's wise to keep both of those firmware + recovery combos on your sd card, so you can do a switch without any problem on as-needed basis.
Hope it helps. Try to be careful with those, if you mix up wrong recovery with wrong firmware you'll need to flash proper recovery.img variant via fastboot. You can't hard brick anything by using those files, in worst case soft-brick if both your recovery and your ROM will be for wrong firmware you have.
Have fun.
We are waiting for AD release. At least a beta?
mido25 said:
We are waiting for AD release. At least a beta?
Click to expand...
Click to collapse
Don't you know how to use the JustArchi's github?
Wow, really helps. I wish I have my OnePlus2 now.
Guihardrock said:
Don't you know how to use the JustArchi's github?
Click to expand...
Click to collapse
No sir. I do not know. Once I tried downloading a build from the below location and tried flashing it but recovery didn't allow me to flash it.
https://t.co/96EZIl6dJJ
I don't know why is it failed. My knowledge about github and making builds are limited.
mido25 said:
No sir. I do not know. Once I tried downloading a build from the below location and tried flashing it but recovery didn't allow me to flash it.
https://t.co/96EZIl6dJJ
I don't know why is it failed. My knowledge about github and making builds are limited.
Click to expand...
Click to collapse
ok so i will explain you when you download that file you have to unzip it and then you will have a folder with another folder (if you choosed unzip in archidreoid etc.zip so inside that folder you will have the necesary files (view the attached screenshot) you will have to pack them in a zip file
hope it helps but try to download the latest file to do that cause last time i tried the oneplus2 archidroid there were things that dint work such as ad filter
Guihardrock said:
ok so i will explain you when you download that file you have to unzip it and then you will have a folder with another folder (if you choosed unzip in archidreoid etc.zip so inside that folder you will have the necesary files (view the attached screenshot) you will have to pack them in a zip file
hope it helps but try to download the latest file to do that cause last time i tried the oneplus2 archidroid there were things that dint work such as ad filter
Click to expand...
Click to collapse
Thanks a lot for your guidance. Appreciate if you can give a link to his latest build.
Sent from my ONE A2003 using Tapatalk
mido25 said:
Thanks a lot for your guidance. Appreciate if you can give a link to his latest build.
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Lost recovery
Hi sir,
I have flashed MM using the TWRP recovery as normal. But now I have lost my recovery. I am not able to boot into any recovery. Pls help.
JustArchi said:
At the moment we have rather dfficult situation because custom ROMs based on AOSP (such as my AD which is not yet public) require previous OOS LP firmware, while OOS 3.0 includes new MM firmware which breaks both older recoveries and custom ROMs.
As I need to switch between OOS 3.0 and my AD quite frequently, I created two helpful flashable zips so I can do that easily, and because it's useful for me, perhaps it'll be useful for you too.
Download: MM | LP
Instructions:
- Download the firmware you want (or both, if you want easy switching)
- Unpack downloaded zip, you'll find firmware-update.zip and recovery.img inside
- Put both of those files on your phone, in appropriately named directory such as "firmware-LP" or "firmware-MM"
- When you will need to do a switch, simply firstly flash firmware-update.zip, then flash recovery.img as recovery image via "flash image" option in TWRP
- Reboot to load new firmware
That's it, this way you firstly flash chosen firmware version, and then TWRP recovery that works with it.
So if you have two TWRP backups - one of OOS 3.0 and one of CM13.0, make sure that you have proper firmware (and recovery) after restoring backup - LP for CM13.0, and MM for OOS 3.0.
Situation should soon improve (when OnePlus pushes kernel sources, and MM-based ROMs will rebase), but until then it's wise to keep both of those firmware + recovery combos on your sd card, so you can do a switch without any problem on as-needed basis.
Hope it helps. Try to be careful with those, if you mix up wrong recovery with wrong firmware you'll need to flash proper recovery.img variant via fastboot. You can't hard brick anything by using those files, in worst case soft-brick if both your recovery and your ROM will be for wrong firmware you have.
Have fun.
Click to expand...
Click to collapse
Your ll recovery is in chinese. How to change it?
EDIT: Forget it. I found where to change the language! Thanks.
eswa1068 said:
Hi sir,
I have flashed MM using the TWRP recovery as normal. But now I have lost my recovery. I am not able to boot into any recovery. Pls help.
Click to expand...
Click to collapse
Use fastboot to flash the recovery
Guihardrock said:
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Click to expand...
Click to collapse
Thank you Sir
Tierri said:
Your ll recovery is in chinese. How to change it?
EDIT: Forget it. I found where to change the language! Thanks.
Click to expand...
Click to collapse
Hi,
Can u let me know where to change the language of twrp ?
Sent from my ONE A2003 using Tapatalk
amit_sen said:
Hi,
Can u let me know where to change the language of twrp ?
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Yes. See the images to help you.
Guihardrock said:
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Click to expand...
Click to collapse
It's around 900 mb zip..?
And did anyone try that build..?
Mohit31 said:
It's around 900 mb zip..?
And did anyone try that build..?
Click to expand...
Click to collapse
Its because of the aroma you can choose the gapps of your choice...
Guihardrock said:
Its because of the aroma you can choose the gapps of your choice...
Click to expand...
Click to collapse
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
This thing should be STICKY
Finally was able to install CM13 properly using this recovery without Google Services crashing.
Mohit31 said:
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
Click to expand...
Click to collapse
Now i am in oos3 but when justarchi release archidroid i wont use any other rom, i had so great experience with this on my s3
Edit: i am gonna try it :3 yo made me do it
Mohit31 said:
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
Click to expand...
Click to collapse
rom is smooth as h*ll and battery is better than in normal cm13 but as i said the backed dont work yet :3 and aroma is not fully functional with the bootanimation and root (but the rom has the cm superuser)
We all know @corphish and @LahKeda built awesome roms for SGSD.
Everything has a good and bad side;so do our CM roms.
While they're fast,debloated and amazing with @psych.half 's kernel,on the other hand there's a high contrast issue on them which is a big pain for us.
This bug first appeared in ZD Kernel by @corphish(Stock modded by cleverior.ipul was ok).And after that,on every rom.So,maybe this is a kernel related issue(guess).
The phone screen seems okay after every reboot(not softboot).But after turning the screen off for the 1st time(after reboot),problem kicks in.
Contrast level gets too high that sometimes we can hardly see what's going on the screen.Eyes hurts really bad when we increase device brightness.
@corphish @LahKeda
I already tried using screen filters eg-screen filter apk,darker apk,but still its not like the stock.U know u can't fix a broken window with some tape :'(
Kernel Tests and Result ---
Only Stock mod by cleverior and Basic Kernel don't have brightness bug.
Can we do anything to fix it?
Edit : Fixed
As @corphish told...
That's a firmware issue.
@dabakale @LahKeda
That's how I fixed it.
Downloaded Pre-rooted Stock by @Chirtagh from here .
Wipe everything from recovery including Internal SD(for a clean install).
Extract that file and flash the tar file using ODIN.
Then flash cm 10.1 over it and there will be no contrast bug!
Contrast bug is a well known bug for mint2g, but honestly speaking I myself never faced it.
It surely is a kernel thing and I think it also depends on firmware. @psych.half did spot some display related changes in various kernel source releases, but since those releases are tarball, its hard to know which source goes with which firmware.
Anyway speaking of me regarding firmware, I always used the latest firmware that was available. I was on XXANF3 (firmware name must include NF) and on them I did all sorts of stuff, flashed various versions of CM ROMs on it.
I am not sure whether you can still get the firmware or not, but if possible, flash that first using Odin only and then flash ROMs.
corphish said:
Contrast bug is a well known bug for mint2g, but honestly speaking I myself never faced it.
It surely is a kernel thing and I think it also depends on firmware. @psych.half did spot some display related changes in various kernel source releases, but since those releases are tarball, its hard to know which source goes with which firmware.
Anyway speaking of me regarding firmware, I always used the latest firmware that was available. I was on XXANF3 (firmware name must include NF) and on them I did all sorts of stuff, flashed various versions of CM ROMs on it.
I am not sure whether you can still get the firmware or not, but if possible, flash that first using Odin only and then flash ROMs.
Click to expand...
Click to collapse
thank you for your reply, sir.
I will try and report back.
Oh,one more thing,
Isn't XXANF4 is the latest firmware available for us?
@BatDroid I've never faced that issue before so try what corphish said and tell us .
@BatDroid u r right
i have already tested every custom ROM
the problem kicks in as and when the cpu enters into deep sleep after fresh reboot ( i rebooted 20-30 times to confirm this )
what is ur point of view?
is taking logs in that period would be helpful?
i m very annoyed with this bug
please reply
---------- Post added at 12:32 PM ---------- Previous post was at 12:23 PM ----------
[/COLOR @BatDroid did u flash XXANF3 Firmware?
is it solved the bug?
i saw ur post in psych's kernel thread lately
sorry for lot more questions
waiting for ur reply ASAP ???
dabakale said:
@BatDroid u r right
i have already tested every custom ROM
the problem kicks in as and when the cpu enters into deep sleep after fresh reboot ( i rebooted 20-30 times to confirm this )
what is ur point of view?
is taking logs in that period would be helpful?
i m very annoyed with this bug
please reply
---------- Post added at 12:32 PM ---------- Previous post was at 12:23 PM ----------
[/COLOR @BatDroid did u flash XXANF3 Firmware?
is it solved the bug?
i saw ur post in psych's kernel thread lately
sorry for lot more questions
waiting for ur reply ASAP
as LahKeda and corphish telling that they never faced that issue, so I think flashing latest stock firmware worth a try.
I haven't flashed yet.Currently I'm running out of data and wifi.
It may take 7-8 days to test.
Click to expand...
Click to collapse
@BatDroid
thanks for ur reply.
i will try and report u after installing XXANF3 Firmware on my phone
my phone has XXANA2 firmware
dabakale said:
@BatDroid
thanks for ur reply.
i will try and report u after installing XXANF3 Firmware on my phone
my phone has XXANA2 firmware
Click to expand...
Click to collapse
okay
try it
and send me the link of the firmware.
I can't find it
at least XXANF3
or XXANF4
format : odin flashable (tar.md5)
@BatDroid
here u go i found link
https://www.androidfilehost.com/?fid=24052804347827019
dabakale said:
@BatDroid
here u go i found link
https://www.androidfilehost.com/?fid=24052804347827019
Click to expand...
Click to collapse
cool!
lets try
BatDroid said:
cool!
lets try
Click to expand...
Click to collapse
but it is not tar.md5
all files are in .img format
like
recovery.img
boot.img
what to do now
dabakale said:
but it is not tar.md5
all files are in .img format
like
recovery.img
boot.img
what to do now
Click to expand...
Click to collapse
did u find something like system.img?
there should be a odin flashable tar file.
Or is it a recovery flashable zip?
dabakale said:
but it is not tar.md5
all files are in .img format
like
recovery.img
boot.img
what to do now
Click to expand...
Click to collapse
download from here
Use pc(if u have)
or try with uc, chrome or a java script enabled browser from phone
@BatDroid the link provided by u is not working
i tried in both uc and chrome in phone
and also in pc (i don't own pc. i tried in my friend's pc)
i Googled a lot but couldn't find a single link for that firmware
and one more thing could corphish help us
(suppose if he has that firmware saved with him)
dabakale said:
@BatDroid the link provided by u is not working
i tried in both uc and chrome in phone
and also in pc (i don't own pc. i tried in my friend's pc)
i Googled a lot but couldn't find a single link for that firmware
and one more thing could corphish help us
(suppose if he has that firmware saved with him)
Click to expand...
Click to collapse
@corphish
@LahKeda
extremely sorry for disturbing again
anybody has the latest stock firmware?
Build - XXANF3 or XXANF4
@RJinxed
Here's d problem that we all are facing.
Check corphish's 2nd reply.
my stock version is S5282XXAME5 .
@BatDroid
download the app which is shown in first screenshot
u will be able to get XXANF3 firmware easily
i have already downloaded just need to flash
after flashing i will report u
dabakale said:
@BatDroid
download the app which is shown in first screenshot
u will be able to get XXANF3 firmware easily
i have already downloaded just need to flash
after flashing i will report u
Click to expand...
Click to collapse
result?
BatDroid said:
result?
Click to expand...
Click to collapse
i will be flashing it tonight.
i need to borrow pc from one of my friend's.
i will report u after flashing the ROM.
Since @EsromG5 and @SoUnd001 started to work on nougat booting in both firmware...
I just did ganesh varma's multirom works in mm bootloader using @vaserbanix 's tutorial https://forum.xda-developers.com/galaxy-j5/how-to/tutorial-to-replaceing-original-kernel-t3543167
Edit: using aroma LP/MM by Zonik, now it work in both firmware too.
ganesh varma's thread/tutorial https://forum.xda-developers.com/galaxy-j5/development/mod-multirom-samsung-galaxy-j5-t3521449
THIS MOD IS NOT TO ROMS THAT NEED LL BOOTLOADER INSTALL IN MM BOOTLOADER (vice-versa)
Example of combinations in mm bootloader: any rom that need mm bootloader(stock rom, aroma roms, other custom roms) as primary rom (normal installation) WITH mm bootloader custom roms, nougat roms(soon) as secondary.
-In case of aroma roms as primary, u must use AROMA twrp to install the aroma rom then install multirom twrp and multirom.zip to install secondary roms.
-To install two or more aroma roms u have to:
1-install the rom u want using aroma twrp
2-install the multirom twrp and multirom.zip and move the primary rom to secondary
3-install aroma twrp, wipe everything except external card and internal storage
4-install multirom twrp and zip again
DOWNLOADSJ500 M-F-FN-Gworks fine in M, FN model, but i need testers to other modelsMultirom.zip
Credits:
@nkk71 for his kexec workaround
@Tasssadar For MultiromSource Code
@Nick Verse
@ganesh varma
@By Zonik
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2017-05-25
Created: 2017-05-25
J500F/H/FN ??
sivakrishnanj said:
J500F/H/FN ??
Click to expand...
Click to collapse
can you test pls?
Download wont work
infixremix said:
Download wont work
Click to expand...
Click to collapse
Yeah, need to share it as zip with public link
American_Jesus said:
Yeah, need to share it as zip with public link
Click to expand...
Click to collapse
Nope the download works can confirm click on open in window download works , works on mm too but the zip file for multirom isn't there but I'm going to use the twrp for flashing nogut on mmm
infixremix said:
Nope the download works can confirm click on open in window download works , works on mm too but the zip file for multirom isn't there but I'm going to use the twrp for flashing nogut on mmm
Click to expand...
Click to collapse
added. u can't install nougat o mm bootloader for now. the rom must be modified to u install nougat rom in mm bootloader
What ur model?
luisfelipee said:
added. u can't install nougat o mm bootloader for now. the rom must be modified to u install nougat rom in mm bootloader
What ur model?
Click to expand...
Click to collapse
Fn
infixremix said:
Nope the download works can confirm click on open in window download works , works on mm too but the zip file for multirom isn't there but I'm going to use the twrp for flashing nogut on mmm
Click to expand...
Click to collapse
I mean, the link to TWRP goes to recovery.img and recovery.tar.md5, there's no need to download both files, only needs to share recovery.tar.md5.
Both files will only confuse users, share only recovery.tar.md5 with public link.
American_Jesus said:
I mean, the link to TWRP goes to recovery.img and recovery.tar.md5, there's no need to download both files, only needs to share recovery.tar.md5.
Both files will only confuse users, share only recovery.tar.md5 with public link.
Click to expand...
Click to collapse
If they get confused, they need to know the difference
how to delete this mod? HELP!
is it difficult to write a few words? Because of this program, the phone now works badly. you want to spoil our phones?
Vicka79 said:
is it difficult to write a few words? Because of this program, the phone now works badly. you want to spoil our phones?
Click to expand...
Click to collapse
Flash a new recovery.IMG like any twrp and just in case reflash your bootloader.img.tar in odin
thanks
---------- Post added at 06:55 PM ---------- Previous post was at 06:48 PM ----------
how to reinstall bootloader? please link bootloader for fn model. android MM.
Vicka79 said:
thanks
---------- Post added at 06:55 PM ---------- Previous post was at 06:48 PM ----------
how to reinstall bootloader? please link bootloader for fn model. android MM.
Click to expand...
Click to collapse
this is the thread for the bootloader just look for 6.0.1 that's mm and read the instructions there https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801
garylawwd said:
this is the thread for the bootloader just look for 6.0.1 that's mm and read the instructions there https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801
Click to expand...
Click to collapse
thanks
Will it work on my J500N0? TWRP Installed and still lollipop(There was no updates from samsung).
luisfelipee said:
can you test pls?
Click to expand...
Click to collapse
I can test the H variant if needed.
Zakaryan2004 said:
I can test the H variant if needed.
Click to expand...
Click to collapse
not working