Hi Guys, As you know there is not source and the source'm not very good to say .. but at least I bring as operating the xposed framework, (will also be used to change fonts, bootanimation etc. ..)
We went into root explorer, and headed / system
Set_Immutable.list select and change the name to Set_immutable.lis.old
now proceed to install the xposed framework (the latest version)
we entered
Xposed Installer> Framework> Install / update
If that does not work, go to build.prop and change ro.config.hwtheme = 0
Screenshot
Dose that works with the Mediapad X1 running on kitkat B010
Does not seem to work for me on B008 Malaysia firmware for X1. There is no hwtheme line in the build prop and even after I added it, it still doesn't work.
This tutorial is for the M1 not the X1.
omniphil said:
This tutorial is for the M1 not the X1.
Click to expand...
Click to collapse
Yes I know, but the steps are the same.
Did you get Xposed working on your 4.4.2 ROM? Mind sharing?
joytest said:
Yes I know, but the steps are the same.
Did you get Xposed working on your 4.4.2 ROM? Mind sharing?
Click to expand...
Click to collapse
The steps aren't the same or you would have been able to get it working
The X1 has a themeing engine that interferes with Xposed framework. There is a hack to get it to sort of work, but most of the useful functionality does not work.
omniphil said:
The steps aren't the same or you would have been able to get it working
The X1 has a themeing engine that interferes with Xposed framework. There is a hack to get it to sort of work, but most of the useful functionality does not work.
Click to expand...
Click to collapse
I would much appreciate your help in providing steps to get Xposed working on 4.4.2
I'm on B008 Malaysia firmware, and it is KitKat. I have it rooted with SuperSU and Busybox. Titanium is working fine, but doesn't seem to run schedules. Otherwise there aren't any other issues.
joytest said:
I would much appreciate your help in providing steps to get Xposed working on 4.4.2
I'm on B008 Malaysia firmware, and it is KitKat. I have it rooted with SuperSU and Busybox. Titanium is working fine, but doesn't seem to run schedules. Otherwise there aren't any other issues.
Click to expand...
Click to collapse
What are you looking to modify with Xposed Framework? A lot of the plugins wont work because of the X1's theming engine...
Here's a patch for the Huawei phones, but be warned this can really mess things up...
http://forum.xda-developers.com/showthread.php?t=2547781
and
http://www.modaco.com/topic/372595-how-to-use-xposed-framework-26-on-huawei-roms/
when I am root, I cant get the permissions for change name of immutable.list, I test everything, I need to tell that I get ota rom from september, my rom is s8-301wV100R001C115B003, i have found this page, about M1, but its in russian
4pda.ru/forum/index.php?showtopic=604666
there are many different ROMs and ways to Root but i havent test them coz I have fear to turn my tablet to russian XD, im a little noobish, please help, i wnt install Xposed and look great this tablet.
This trick also work perfectly on mediapad xi 7d-501l 4.2.2 use exposed installer framework v 2.7.1
Related
Hi,
The "Permission Manager" is missing in my recent 7D-501L firmware Kitkat B102.
In the 7D-503L chinese version, this "Permission Manager" is still and always present.
So, do you know a way to have and display this "Permission Manager" in my 7D-501L firmware ?
Thanks in advance for helping.
lvpl said:
Hi,
The "Permission Manager" is missing in my recent 7D-501L firmware Kitkat B102.
In the 7D-503L chinese version, this "Permission Manager" is still and always present.
So, do you know a way to have and display this "Permission Manager" in my 7D-501L firmware ?
Thanks in advance for helping.
Click to expand...
Click to collapse
i believe 'Permission Manager' exists only in roms that are meant for use in China. B102 is for Germany / International use, thus it has been excluded.
potatohead said:
i believe 'Permission Manager' exists only in roms that are meant for use in China. B102 is for Germany / International use, thus it has been excluded.
Click to expand...
Click to collapse
I have a Chinese 503L and I downloaded the B102 rom from that German site. Yup, indeed permission manager is gone, which is great because that app was terrible and didn't seem to work right, maybe Huawei is starting remove the crap from their roms? I noticed all the preinstalled Bloatware games were in a folder that contain a "Deleteme" file, so I deleted the entire folder and all the junk games were removed, very nice!
They have fixed a bunch of stuff in B102, Google play stuff is no longer blocked, All the app incompatibilities are gone (But still 400 DPI), The voicemail has been fixed.
All I had to do was root and use titanium backup, nice!
Now we have to see how the Wifi and 3G signal hold up over time and is app still shutdown in the background after a while.
Huawei is getting close!
omniphil said:
I have a Chinese 503L and I downloaded the B102 rom from that German site. Yup, indeed permission manager is gone, which is great because that app was terrible and didn't seem to work right, maybe Huawei is starting remove the crap from their roms? I noticed all the preinstalled Bloatware games were in a folder that contain a "Deleteme" file, so I deleted the entire folder and all the junk games were removed, very nice!
They have fixed a bunch of stuff in B102, Google play stuff is no longer blocked, All the app incompatibilities are gone (But still 400 DPI), The voicemail has been fixed.
All I had to do was root and use titanium backup, nice!
Now we have to see how the Wifi and 3G signal hold up over time and is app still shutdown in the background after a while.
Huawei is getting close!
Click to expand...
Click to collapse
Dear Omniphil,
How did you root your X1? I have flashed B102 rom and tried rooting using Vroot but it fails everytime. Please help.
Thanks
aflatoon2874 said:
Dear Omniphil,
How did you root your X1? I have flashed B102 rom and tried rooting using Vroot but it fails everytime. Please help.
Thanks
Click to expand...
Click to collapse
I used the latest version of Vroot which should be 1.7.8
V1.7.9 is the latest. Please get directly from mygun.com; there some version floating around with viruses.
omniphil said:
I used the latest version of Vroot which should be 1.7.8
Click to expand...
Click to collapse
Thanks Omniphil. I was using 1.7.3, downloaded 1.7.8 and when I first ran, it offered to upgrade to 1.7.9.2. The root process went thru fine. Now my phone is rooted.
Is there a way to change DPI to 320? The build.prop does not have any prop that can be changed.
Thanks
Also interested to know if the WiFi is improved. Good to know the app issues are mostly gone.
Sent from my MediaPad X1 7.0 using Tapatalk
I haven't tried manually setting the DPI to 320, I suspect its not going to work like the rest of the X1 roms so far. It just messes with the built in theme engine and breaks alot of things.
Even though I would prefer 320DPI, 400 is workable because they fixed the app compatibility issues. (I really really wish Huawei would go back to 320DPI however)
Wifi for me is better than all the previous 4.4 builds, but It does not seems as good as the 4.2 build (B008). It doesn't seem to disconnect nearly as much as it did with the other 4.4 builds.
3G is also not as good as the 4.2 builds, but the 3G seems better than any other 4.4 build.
So basically signal issues are better in B102 than any other 4.4 build, but still not as good as the 4.2 build B008 (which wasn't perfect either, still worse than any other phone I have ever had but usable for the most part)
X1's wifi antenna is located at the bottom right corner, leave that portion unhindered for best reception.
Xposed 2.5.1 / 2.5.2 framework works in X1 4.4.2 China ROM B010 for 503L, together with AppSettings, this combi gives the end user the flexibility of configuring the DPI for individual apps. I actually prefer this arrangement as the main shell remains at 400 DPI for easy operation and certain apps like news readers, browsers or maps can be 320 or below to maximise screen real estate.
The above will break the theme engine (themes can be applied but there will not be changes to the icons), other than that everything works well and smoothly, no FCs.
YMMV on B102 international ROM.
Xposed 2.5.1
potatohead said:
X1's wifi antenna is located at the bottom right corner, leave that portion unhindered for best reception.
Xposed 2.5.1 / 2.5.2 framework works in X1 4.4.2 China ROM B010 for 503L, together with AppSettings, this combi gives the end user the flexibility of configuring the DPI for individual apps. I actually prefer this arrangement as the main shell remains at 400 DPI for easy operation and certain apps like news readers, browsers or maps can be 320 or below to maximise screen real estate.
The above will break the theme engine (themes can be applied but there will not be changes to the icons), other than that everything works well and smoothly, no FCs.
YMMV on B102 international ROM.
Click to expand...
Click to collapse
Hi potatohead,
1/ When i've installed Xposed 2.5.1 on My X1 4.4.2, it's ok BUT I can't open the Settings (app) of my device. The message displays "settings.app" is stopped.
What about ? have you managed to open the settings after installing the Xposed 2.5.1 ?
2/ YMMV ? What does that mean ? lol
Thanks for answering.
lvpl said:
Hi potatohead,
1/ When i've installed Xposed 2.5.1 on My X1 4.4.2, it's ok BUT I can't open the Settings (app) of my device. The message displays "settings.app" is stopped.
What about ? have you managed to open the settings after installing the Xposed 2.5.1 ?
2/ YMMV ? What does that mean ? lol
Thanks for answering.
Click to expand...
Click to collapse
1) i guess xposed is not compatible with X1's international rom then; it works fine on China rom b010 (4.4.2 emui 2.3)
2) ymmv = your mileage may vary
I will be starting a thread on newest leaked rom (beta) for 503L - 4.4.2 / EMUI 2.3 / 320 DPI, initial feedback from Chinese users suggest it runs very smooth and free ram after boot is a whopping 1.4-1.5GB, u may want to try it out stay tuned
potatohead said:
I will be starting a thread on newest leaked rom (beta) for 503L - 4.4.2 / EMUI 2.3 / 320 DPI, initial feedback from Chinese users suggest it runs very smooth and free ram after boot is a whopping 1.4-1.5GB, u may want to try it out stay tuned
Click to expand...
Click to collapse
Wow, where do we get that rom! Kitkat and 320DPI yay!!!!!!
Is it an official Huawei rom? or something someone else made?
omniphil said:
Wow, where do we get that rom! Kitkat and 320DPI yay!!!!!!
Is it an official Huawei rom? or something someone else made?
Click to expand...
Click to collapse
I have started the thread - http://forum.xda-developers.com/huawei-mediapad/general/rom-kitkat-4-4-2-emui-2-3-320-dpi-t2923307 - enjoy!
It is official beta from Huawei, released to a closed group of testers, and of course, in this age and time, ultimately leaked.
lvpl said:
Hi potatohead,
1/ When i've installed Xposed 2.5.1 on My X1 4.4.2, it's ok BUT I can't open the Settings (app) of my device. The message displays "settings.app" is stopped.
What about ? have you managed to open the settings after installing the Xposed 2.5.1 ?
Thanks for answering.
Click to expand...
Click to collapse
Try this and see if Xposed works
http://forum.xda-developers.com/showpost.php?p=56417515&postcount=5
potatohead said:
Try this and see if Xposed works
http://forum.xda-developers.com/showpost.php?p=56417515&postcount=5
Click to expand...
Click to collapse
To resume :
1/ 7D-501L International rom B102 : NO xposed modules work correctly, "settings.app" doesn't work anymore after installing Xposed framework 2.5.1
2/ [ROM][HUAWEI OFFICIAL BETA][7D-503L]KitKat 4.4.2 / EMUI 2.3 / 320 DPI : xposed modules work correctly BUT settings.app doesn't work anymore after installing Xposed framework 2.5.1
--> potatohead : are you sure you're able to open the settings after installing the xposed framework ?
If true maybe, i missed something. So, is it possible to resume the whole different steps to install Xposed Framework on your B010 4.4.2 ?
Thanks in advance.
N.B: I noticed when i edited the "build.prop" line "ro.config.hwtheme=1" set it to 0, "settings.app" doesn't work anymore.
However, in the [ROM][HUAWEI OFFICIAL BETA][7D-503L]KitKat 4.4.2 / EMUI 2.3 / 320 DPI, "settings.app" doesn't work with ro.config.hwtheme=1 or 0.
It's very weird !!
lvpl said:
To resume :
1/ 7D-501L International rom B102 : NO xposed modules work correctly, "settings.app" doesn't work anymore after installing Xposed framework 2.5.1
2/ [ROM][HUAWEI OFFICIAL BETA][7D-503L]KitKat 4.4.2 / EMUI 2.3 / 320 DPI : xposed modules work correctly BUT settings.app doesn't work anymore after installing Xposed framework 2.5.1
--> potatohead : are you sure you're able to open the settings after installing the xposed framework ?
If true maybe, i missed something. So, is it possible to resume the whole different steps to install Xposed Framework on your B010 4.4.2 ?
Thanks in advance.
N.B: I noticed when i edited the "build.prop" line "ro.config.hwtheme=1" set it to 0, "settings.app" doesn't work anymore.
However, in the [ROM][HUAWEI OFFICIAL BETA][7D-503L]KitKat 4.4.2 / EMUI 2.3 / 320 DPI, "settings.app" doesn't work with ro.config.hwtheme=1 or 0.
It's very weird !!
Click to expand...
Click to collapse
I have never tried B102 International ROM or edited build.prop for B010 China ROM.
I installed Xposed using the apk attached below, however I think it shd not make any diff as to which initial Xposed apk u use because ultimately u will update to 2.5.1 from within Xposed.
After updating to 2.5.1, I then downloaded the 1.8 version (1.9 is not compatible) of App Settings Module, reboot and per app setting works via App Settings.
I did install XHaloFloatingWindow Module (latest version) too, but I do not think that has any effect on per app DPI settings.
I am rooted on 503L China ROM B010 (4.4.2 / 2.3 / 400), downloaded from - http://www.emui.com/nsp/geturl.php?path=7D-503L_EMUI_2.3_V100R002C233B010.zip&rid=593
Hey guys !
As announced today, I will release a mod for our Xperia X10.
The full review is available here.
You can download it here (mediafire link)
WARNING The rom zip file is a CLOCKWORKMOD BACKUP. Means you musn't flash it as a update.zip. You have to unzip it with your computer to push the "clockworkmod" folder yo your SDCARD. If you don't fail, you must be able to restore my backup with CWM recovery.
Of course, flash the same kernel i used. it's this kernel. Thanks @Achotjan
Maybe this rom works with this kernel too. Thanks @scritch007
Lets list all the apps and features i added (clic show to show x) ):
- Google Search 4 and libs from Lollipop to enable voice recognition.
- Google Fit if you want to lose weight because you spent too much time to compile
- File Manager (The same who was in my previous mod.
- Android 4.2.2 Clock
- Kitkat Fonts
- Titanium backup standard
- White icons on statusbar and Lollipop network icons
- Lollipop launcher
- Nexus 6 Wallpaper
- Cyanogenmod 11 Changelog in about this phone
- ANDROID L PREVIEW, NOT LOLLIPOP FOR NOW easter egg. Using eggster xposed module
- Xposed installer with Xposed Gel Settings, Gravitybox and eggster
- Google Keyboard 4, with marerial design of course
- Android Lollipop Bootanimation
- Google Play Store 5.0.38 with material design
- Overclock to 1267MHZ set on boot, ondemand governor and KSM enabled, for SDE kernel users
- You'll see
- Forgotten it : DPI set to 200
BUGS :
- Some rares random graphic glitches
- Camcorder
- Same as CM10
- Random reboots if you let CPU run @1.2Ghz for some users. To fix it, goto Settings; scroll down to Performance; and change max frequency to 1.1Ghz or lower.
- You tell me
If they are modders able to backport Lollipop settings, deskclock and systemUI to Jellybean 4.1, please PM me to make it awesome
Dont forget the zip file is a backup and not an update.zip.
Install Material design Google keep : http://www.apkmirror.com/apk/google-inc/keep/keep-3-0-03-apk/
This mod is based to @scritch007 CMX10, so it's 4.1.2. It's NOT Lollipop, and not Kitkat. It's themed Jelly Bean.
Happy flashing
Well done on this
I don't use my X10 for anything meaningful anymore these days but might have to give this a shot.
alex_ncfc said:
Well done on this
I don't use my X10 for anything meaningful anymore these days but might have to give this a shot.
Click to expand...
Click to collapse
Me too. I turned to Nexus 5. Real lollipop is fine. I picked Google libs from my phone to make Google Search 4.0 working on X10. It seems to work fine.
Hope you enjoy it. Will try to mod apps but im noob for this dont expect perfect lollipop IU therefore
Cheers
dekefake said:
Me too. I turned to Nexus 5. Real lollipop is fine. I picked Google libs from my phone to make Google Search 4.0 working on X10. It seems to work fine.
Hope you enjoy it. Will try to mod apps but im noob for this dont expect perfect lollipop IU therefore
Cheers
Click to expand...
Click to collapse
Just fired up the ROM. Loving the boot animation! I got into the main homescreen but then it froze and rebooted I know why - it's because as you said above, the default clock speed is 1.2Ghz. My X10 has never been able to handle anything above 1.113Mhz, so unfortunately I can't get into the settings fast enough to change it before it freezes
However, what I can see on the homescreen looks amazing! You've done a fantastic job with the presentation of the ROM.
alex_ncfc said:
My X10 has never been able to handle anything above 1.113Mhz, so unfortunately I can't get into the settings fast enough to change it before it freezes
However, what I can see on the homescreen looks amazing! You've done a fantastic job with the presentation of the ROM.
Click to expand...
Click to collapse
Flash CMX10 kernel with flashtool and boot the rom with it. I think it will reset the CPU settings.
Thanks buddy
I have 4 invites with 6 days validity to buy the OnePlus One. I want to give it to developers so they can create ROMS for the amazing phone. If you know any developers in search of an invite please let me know. I will be more than happy to share invites with them
Hey guys !
Submit everything you want to see here, i will try to implement it
Cheers
PS: If you know someone able to help me to build a boot.img, and edit it to make it working for various manufacturer roms, please let me know
Hey, when I tried to install the rom, it's great, very great but no sim card detected, I haven't any network.
Have you a solution please?
Thanks a lot.
EDIT : I think it's good now, sim card recognize ! But have you random reboot and looooong freeeze you too?
I can't use the phone more 2 minutes because after, my phone reboot.
Hey guys !
Eggster module has been updated and now with Lollipop easter egg support. Please update eggster in xposed installer and select Lollipop easter egg
Cheers
lehrqt said:
But have you random reboot and looooong freeeze you too?
I can't use the phone more 2 minutes because after, my phone reboot.
Click to expand...
Click to collapse
Maybe because default clock is 1267Mhz. Goto settings; performance and set clock to 1GHz, and make sure you use SDE kernel.
some screenshots or video review of this rom would be very nice.
psychem said:
some screenshots or video review of this rom would be very nice.
Click to expand...
Click to collapse
Have a look to my YouTube channel
Hey, when I try to install some applications, I have an error message
"error during the installation of informations server ([RPC:S-7: AEC-0])
I tried to reinstall the rom and anything but no results...
can you help me please?
lehrqt said:
Hey, when I try to install some applications, I have an error message
"error during the installation of informations server ([RPC:S-7: AEC-0])
I tried to reinstall the rom and anything but no results...
can you help me please?
Click to expand...
Click to collapse
Rare issue, not due to the rom. Disconnect to your Google account, wipe Google Play Store app data and open it and re-add your account it should be Ok
how install rom ?? Please help!
As the post says, any luck on getting either working? I wish to flash Xposed but scared of getting bootloops.
With regards to Gravity Box, the latest current version does not even work with 5.1 without causing bootloops.
kanej2006 said:
As the post says, any luck on getting either working? I wish to flash Xposed but scared of getting bootloops.
With regards to Gravity Box, the latest current version does not even work with 5.1 without causing bootloops.
Click to expand...
Click to collapse
If you are on the Sony LP, you must wipe the ART cache on EVERY boot (Dalvik cache) since it will bootloop otherwise.
On other ROMs such as Resurrection Remix or BlissPop 2.3 based on 5.0.2, Xposed works well. GravityBox works too but is not that necessary on such a customizable ROM.
If you want Xposed without inconvenience, flash a different ROM than the Sony one and if you can live without GravityBox, I would recommend you to follow the 5.1 route and try the latest Cyanide ROM, which is excellent. Xposed Super-Alpha works but not GravityBox (which isn't necessary due to great customization options in the ROM).
Read here:
http://forum.xda-developers.com/xperia-z-ultra/general/xposed-lollipop-14-5-0-242-bootloop-t3086467
I got gravitybox and several other modules running on lollipop with locked BL.
EDIT: Forgot to add, i lost recent key after installing gravity box. I use gravity box to reduce the height of navigation bar. I mean the key is ther and i can use it, just the square icon isn't there for some reason. hasn't really tried anyhting to get it back, just so you know, it doesn't bother me much.,
^ Thank you so much E90 Commie & jassalmithu for your response, both of which have been very useful...
I am indeed currently using the latest stock Sony 5.02 rom. I've not yet tried any other 5.02 rom such as Resurrection or Blisspop.
The main thing for me is battery life. I'm not sure how the above roms are for battery life but currently, the stock Sony rom provides excellent battery, even better than Kitkat. I got almost 6 hours of on screen time over a 2 day period!
For the moment, I'll refer to the link provided by jassalmithu and follow the instructions on getting Xposed running without having to wipe the dalvic cache on every boot.
Thanks so much once again.
Good news! After having followed the instructions, both Xposed & Gravity box are fully working without any boot loops or crashes/force restarts.
This was the link I followed which was posted by jassalmithu.
http://forum.xda-developers.com/z3-compact/general/wip-debloat-lp-690-correct-functioning-t3076161
The only issue is that you have to format your data and re-install Android 5.02 for the above to work.
Other than that, I confirm it's working 100% should you follow the already easy to follow instructions!
Hey guys!
Hi just get my black Z5 Compact! It looks amazing!
I already unlocked BL and rooted my pretty little phone :3
Now I would like to install Xposed, but I just got a Q: wich fw should I use? I knew on my old big bad Note 4 I had to use an alternative fw for TW rom. Well, I know Xperia roms are pretty stock, but never know.
Thank y'all! :*
Well, I used XposedInstaller_3.0_alpha4.apk & xposed-v75-sdk22-arm64.zip & tested gravity box and a few others which seemed to be working fine, but as you'll see here, my camera is crashing, so until I worked out why, I can't say that xposed didn't have something to do with it.
I have camera crash too
This is the link :http://forum.xda-developers.com/showpost.php?p=58828974&postcount=1
Thank's, already installed and replied
"I have camera crash too "
Which Build are you on? I am on the old 32.0.A.4.11 and my phone force reboots after I start any app upon boot since I installed xposed sdk22-arm64...
32.0.A.6.152
tried xposed-v80-sdk22-arm64.zip from rovo89, resulted in bootloop and had to uninstall it. just no luck, wait for more stable version.
Anybody at all able to run xposed? No combination at all of versions from 67 to 80 of sdk22 and roms can get me to even boot up. Really really frustrating.
Hi, before I updated to MM I had more tiles/icons I could use. Now with the new update MM 6.0.1 EMUI 4.0 it's not possible to have more than nine ready-to-use icons. So my question is, given I have root, xposed and phone unlocked, how can I add more icons to the dropdown menu? Any files to edit, or any xposed modules to try ?
I tried GravityBox [MM] but it does not work. Phone is KIW-L24, rooted, xposed and TWRP installed.
Thanks.
PS. I have checked for a while for a solution, but so far no luck.
you will be out of luck to hear this..
unfortunately, you cannot do what you are intending to(as for my knowledge).. feature is burried with lollipop ..
i have surfed over the entire settings and found nothing
Yes, I was afraid I'd not be able to change that, ... too bad such a useful feature gets axed. Is there any custom ROM out there for Honor 5X that can do that, that's close to Huawei's EMUI (I kinda got used to it now) ?
I've checked the custom ROMs sub-forum from time to time, but I'm not sure which to chose. Do you have any suggestions ?
Thanks.