Related
EDIT 11/19/2011 : ADDED 1.3 version - Ok folks, lets start with new private rom sharing project
Everyone interested to, please send me a private msg with gmail address
EDIT 11/07/2011 : ADDED KERNEL CHOICE - After lots of requests, I decided to add a kernel choice, with a very simple procedure ...
Download zip file, unpack it in your "Rom_backup" sd directory, reboot in streakmod recovery, go to advanced/nandroid/selective restore and choose your preferred, choose "restore boot"....alternatives are :
1.1b (OC)
2.4.4 (OC)
Gkernel1.0 (NO-OC but VERY VERY STABLE and with LOW battery consumption. Please note that, in order to wifi works properly, ONLY with this kernel you have to replace and restore permissions to "dhd.ko" file in \system\lib\modules using this one : https://docs.google.com/open?id=0BzRB5vMumafCY2MzNTRlZTEtNmZkNy00ZWJhLTk1OTQtZDk3MmY3NDhiZTE0). Special thanks to "Gespecial" which allowed me to use his good work
Download link (Kernels.rar) : https://docs.google.com/open?id=0BzRB5vMumafCZDA2MjY3ZjgtZDE5Mi00NDhmLTlkODktZmM5MTY0YmMwN2Vi
EDIT 10/31/2011 : ADDED 1.2 version - Rom use my personal build kernel, with NO Overclock to increase stability, but with same performance of 1.1b. FLASH issue fixed, added "Red Goodness Theme" vol.2 by default, magic locker and dolphin HD updated to latest versions, all Gapps updated...No sleep of death and no USB issue by default...
To have BEST RESULTS from this rom, best way is to FACTORY RESET and edit the "97personalize_tweak" in "\etc\init.d" directory, with the services names of yours most used apps (launcher, dialer, messages). This is example of mine (I use ADWex, dialerone and gosmspro) : https://docs.google.com/open?id=0BzRB5vMumafCZjkxMzg2MDUtYzZlMi00NDI4LWE0NWUtM2M5NzgwZWE0NWEz. See also footnote "16" below.
ANYWAY,
If you come from "Maxicetdroid1.0-1.1-1.1b" or another 2.4 based version, it's sufficient to : 1. flash the rom - 2. wipe cache and dalvik cache - 3. enjoy. If you come from other roms, follow the instructions below.
This is MD5 : 242fba076a83462961f1da8c7dd4f660
This is download link : https://docs.google.com/open?id=0BzRB5vMumafCOTQ5MGM1ZTktNWJiOS00YTU0LWIyM2ItMTQ5NjA5NmRjMzRh
NOTE : I DON'T WANT DONATION FOR THIS WORK, IF YOU LIKE IT, SIMPLY CLICK "THANKS"...
EDIT 10/30/2011 : ADDED zip ONLY for 1.1b with fix to USB mount/unmount issue and....a little taste of "red goodness and trasparency" VOL.2.. : https://docs.google.com/open?id=0BzRB5vMumafCNGMyMDM4N2UtNmU5Zi00MmMyLTgwMGQtYjgwNGNhMTUyM2M2
Flash it with streakmod recovery and wipe dalvik cache, then wait about 5-6 min first boot only
NOTE : I DON'T WANT DONATION FOR THIS WORK, IF YOU LIKE IT, SIMPLY CLICK "THANKS"...
EDIT 10/30/2011 : ADDED zip for ALL 1.x ROMS with LANDSCAPE stock mode : https://docs.google.com/open?id=0BzRB5vMumafCMGEyNDdjNzQtMDdiYS00ODRmLWJjYjQtN2RjYzk5ZTk2MTBk
Flash it with streakmod recovery
NOTE : I DON'T WANT DONATION FOR THIS WORK, IF YOU LIKE IT, SIMPLY CLICK "THANKS"...
EDIT 10/28/2011 : ADDED 1.1b version - Rom now use Streakdroid 2.4.3 kernel, with 1,267 Mhz Overclock. Same memory and dalvik tweaks of 1.0, added CRT animation by default, added menu' led blinking on active notification (thanks to watch_mania), back to RED THEME by default, magic locker and dolphin HD updated to latest versions. I made 2 days of "fine tuning", and I'm sure that this version is MOST STABLE GINGERBREAD STREAK ROM......
To have BEST RESULTS from this rom, best way is to FACTORY RESET and edit the "97personalize_tweak" in "\etc\init.d" directory, with the services names of yours most used apps (launcher, dialer, messages). This is example of mine (I use ADWex, dialerone and gosmspro) : https://docs.google.com/open?id=0BzRB5vMumafCZjkxMzg2MDUtYzZlMi00NDI4LWE0NWUtM2M5NzgwZWE0NWEz. See also footnote "16" below.
ANYWAY,
If you come from "Maxicetdroid1.0-1.1" or another 2.4 based version, it's sufficient to : 1. flash the rom - 2. wipe cache and dalvik cache - 3. enjoy. If you come from other roms, follow the instructions below.
This is MD5 : 6ab09fbb6f34663560090492206c7419
This is download link : https://docs.google.com/open?id=0BzRB5vMumafCYzY4Mjc2NDktOTQ4ZC00Mzk2LTgxMzQtMzU1YWJmOGE3ZDg5
NOTE : I DON'T WANT DONATION FOR THIS WORK, IF YOU LIKE IT, SIMPLY CLICK "THANKS"...
EDIT 10/23/2011 : ADDED zip with working CRT animation on screen timeout (for 1.0 only) - https://docs.google.com/viewer?a=v&...jYtYzI4Mi00MGQ1LTg3MjItMmM0OTJjMWM0NDQ3&hl=it
Flash it with streakmod recovery and wipe dalvik cache, then enable screen animation
EDIT 10/22/2011 : ADDED new Thread with "MIDFLASHERLITE" a tool to make life easier for beginners - http://forum.xda-developers.com/showthread.php?t=1314869
NOTE : I DON'T WANT DONATION FOR THIS WORK, IF YOU LIKE IT, SIMPLY CLICK "THANKS"...
ORIGINAL POST 10/15/2011 : Here's to you my MaxicetDroid 1.0 INTERNATIONAL...
I managed "GS2.4" kernel and I made a MIX OF TWO DIFFERENT ROM, I added all the translated apk of my previous International version, plus I added "23portrait", ADW, 190 dpi default, the same memory tweaks and customizable "loop tweaks" (thanks to "eoghan2t7") of my SD2.3 rev 2.1
Finally, I rebuilt theme with RED goodness and MAGIC LOCKER default lockscreen (see more details in footnote 18)...
Download link with MD5 1bb7f2d8ce0adf8cc5e89380efbf1afd :
https://docs.google.com/leaf?id=0BzRB5vMumafCZTY5YTc5NjctNWU5Ny00ZDY4LTg0ZjEtOWM0ZTZlMjFkZjVi&hl=it
INSTALLATION INSTRUCTIONS :
1- scaricare il file zip (download zip rom file)
2- scaricare il file amss da qui (download amss file from here) :
https://docs.google.com/leaf?id=0BzRB5vMumafCMzgyYTYyNzYtODgyZi00OTZjLTk1NWYtY2RkMmI4MWRkOWJl&hl=it
ATTENZIONE (WARNING) :
FLASHARE SOLAMENTE QUESTO FILE AMSS.MBN, HO AVUTO ESPERIENZA PERSONALE, PROVATA PER 4 VOLTE DI SEGUITO, CHE FLASHANDO ANCHE IL FILE DSP1 COME DICE DJSTEVE NEL THREAD DI MODACO, PUO' CAUSARE UN "SOFT BRICK" DELLO STREAK, CON CONSEGUENTE NECESSITA' DI RIPRISTINO CON QDLTOOL. (FLASH THIS AMSS.MBN ONLY, ITS MODIFIED FOR THIS KERNEL, I EXPERIENCED FLASHING ALSO DSP1 MAY CAUSE "SOFT BRICK", WITH THE NEEDING OF QDLTOOL)
3- entrare in streakmod recovery (0.3.2.7+) (run streakmod recovery 0.3.2.7+)
4- eseguire un nandroid backup dell'attuale rom (make a nandroid backup)
5- flashare il file zip (flash the zip file)
6- reboot
7- entrare in fastboot mode (go to fastboot mode)
8- flashare il file amss.mbn del punto 2 con fastboot (non chiedere come perchè qui su XDA si incazzano facilmente.. ) p.s. : questo passo può essere evitato da chi lo ha già fatto in precedenza (flash amss file with fastboot, don't ask how because XDA moderators get angry easily..). p.s. : (not necessary if you have already flashed these files)
9- comando reboot di fastboot (make a fastboot reboot)
10- entrare di nuovo SUBITO in recovery fermandosi al menu' con le 4 scelte, scegliere la prima (FACTORY RESET) (keep attention, press vol+ and vol- keys as soon as you see logo DELL, then choose option 1 FACTORY RESET)
11- avviare lo Streak, scegliere preferibilmente ADW come scelta predefinita di launcher, l'altro l'ho messo per "sicurezza" (boot the system, choose preferably ADW, the other one is there only for security reasons)
12- la ROM è di default in ITALIANO, per cambiare la lingua basta andare nelle impostazioni - (Rom is default in ITALIAN, if you want to change language, go to settings)
13- NON ESEGUIRE ASSOLUTAMENTE RESTORE DI APPLICAZIONI O IMPOSTAZIONI DA TITANIUM O ALTRE UTILITY SIMILI, INSTALLARE LE PROPRIE APP PREFERITE SOLO DAL MARKET (DON'T USE TITANIUM BACKUP OR OTHER BACKUP APPLICATIONS TO RESTORE PREVIOUS APPLICATION OR SETTINGS, INSTALL YOUR OWNS ONLY FROM MARKET)
14- Enjoy Gingerbread in Italiano o nella tua lingua (enjoy Gingerbread in Italian or in your language)
15- MOST IMPORTANT : Press Thanks Button (MOST IMPORTANT : Press Thanks Button ...)
VERY IMPORTANT NOTES :
16- Ho aggiunto uno script nella directory "system\etc\init.d", che permette di velocizzare notevolmente i tempi di risposta con le app più utilizzate dalla Rom (ad esempio il Launcher). Di default ho inserito solamente le apk di utilizzo "scontato", è possibile però personalizzare la lista delle app a proprio piacimento editando il suddetto file, sostituendo o aggiungendo fra le "" i nomi dei servizi delle app che vogliamo andare ad inserire. Lo script da editare con "root explorer" si chiama "97personalize_tweak". I nomi dei servizi li trovate nella directory "data\data". Lo script può essere editato tranquillamente dopo avere reinstallato la rom e tutte le vostre applicazioni. Per maggiori info vedi http://forum.xda-developers.com/showthread.php?t=1205744(I added a script in "system\etc\init.d" directory, it's able to speed up response times with the most used app of the Rom (eg the Launcher). By default I inserted only the "obvious" apks, but you can customize the list of the app to your liking by editing this file, replacing or adding in to the "" the names of the services of the app that you want to insert. The script to be edited with "root explorer" is called "97personalize_tweak". You can find the name of the services in "data\data" directory. Script can be edited easily after you have reinstalled the ROM and all your applications. For more info see http://forum.xda-developers.com/showthread.php?t=1205744 )
17- SOLO PER LE ROM SENZA LA "CRT ANIMATION" : Consiglio di modificare la scelta delle animazioni da visualizzare in "nessuna animazione" da impostazioni\display\animazione, sembra che influisca positivamente su alcuni impuntamenti che, anche se raramente, mi dicono che a volte capitano....(ONLY FOR ROMS WITHOUT "CRT ANIMATION" : verify that "display animation settings" is on "no windows animation are shown")
18- Al primo avvio della rom dopo il factory reset, si avvierà il wizard di configurazione di "Magic Locker". Basterà seguire il wizard, deselezionare "menù" nei "settings", e il gioco è fatto. Ho aggiunto anche la schermata di blocco a "Puzzle", basta andare nell'app drawer e scegliere "Samsung Magic Locker", quindi "install". A questo punto tornare in "Magic Locker" settings, scegliere il lock "Samsung" e preferibilmente, il wallpaper default. Se non vi piace o preferite il lockscreen di default, basta disabilitarlo dalle sue impostazioni ....(At the first boot after the factory reset, it will start the configuration wizard "Magic Locker". Just follow the wizard, clear "menu" in "Settings", and you're done. I also added the lock screen "Samsung Puzzle", just go in App drawer and choose "Samsung Magic Locker", then "install". Now go back to "Magic Locker" settings, choose the Lock "Samsung Puzzle" and instead, the default wallpaper. If you don't like it, simply disable it in its settings)
19- Per cambiare il fuso orario, è necessario prima settare la lingua inglese (UK), poi cambiare il fuso orario, poi rimettere la lingua desiderata...(To change Time Zone, it's necessary to change first language in english (UK), then select correct Time Zone, then re-change language)
POINT "10" MOST IMPORTANT, DO A FACTORY RESET
POINT "10" MOST IMPORTANT, DO A FACTORY RESET
POINT "10" MOST IMPORTANT, DO A FACTORY RESET
POINT "10" MOST IMPORTANT, DO A FACTORY RESET
POINT "10" MOST IMPORTANT, DO A FACTORY RESET
POINT "10" MOST IMPORTANT, DO A FACTORY RESET
POINT "10" MOST IMPORTANT, DO A FACTORY RESET
NOTE : I DON'T WANT DONATION FOR THIS WORK, IF YOU LIKE IT, SIMPLY CLICK "THANKS"...
Thanks to "DjSteve" and "fards" who creating the rom
Thanks to "them east friend" (who build the kernel??)
Thanks to "_n0p_ " for some files I used from his NEXUS S sharing
Thanks to "nibras_reeza" for his tweaks
I'm gonna try this now. I am using 2.4 currently.
---------- Post added at 06:21 PM ---------- Previous post was at 06:15 PM ----------
The boot animation rocks. Still loading
I think you should change the name of your rom if you're gonna name it 2.5 as there's no actual 2.5 build.
Your prev two ones were just translations of 2.3 and 2.4 and that makes sense, but if you're gonna change the version number and make other changes to yours you should consider renaming your rom.
So far so good. Nice red theme
---------- Post added at 07:10 PM ---------- Previous post was at 06:28 PM ----------
Maxicet,
I notice that some of the icons in the app drawer are still in Italian. It is probably something easy to change but I've never had to do it before. Do you know an easy way to change that?
streak4m3 said:
So far so good. Nice red theme
---------- Post added at 07:10 PM ---------- Previous post was at 06:28 PM ----------
Maxicet,
I notice that some of the icons in the app drawer are still in Italian. It is probably something easy to change but I've never had to do it before. Do you know an easy way to change that?
Click to expand...
Click to collapse
Simply open the app, reclose it, then restart launcher...now the app is in your language..
TheManii said:
I think you should change the name of your rom if you're gonna name it 2.5 as there's no actual 2.5 build.
Click to expand...
Click to collapse
Agreed 100% +
awexdasome said:
Agreed 100% +
Click to expand...
Click to collapse
+1 for this.
maxicet said:
I managed "GS2.4beta3" kernel
Click to expand...
Click to collapse
Do you really mean beta3? Literally 3?
TheManii said:
I think you should change the name of your rom if you're gonna name it 2.5 as there's no actual 2.5 build.
Your prev two ones were just translations of 2.3 and 2.4 and that makes sense, but if you're gonna change the version number and make other changes to yours you should consider renaming your rom.
Click to expand...
Click to collapse
Ho riflettuto prima di inserire un nuovo thread con il nome 2.5, e credo che questo sia il nome più giusto...
Tu dici che le versioni precedenti erano "semplici traduzioni", in realtà non e' cosi...la rom 2.3b2 di fards non va' cosi bene come la mia 2.1. Quest'ultima infatti ha numerosi tweak, provati e riprovati fino ad ottimizzare il tutto, risolvendo alcuni problemi che prima erano presenti, velocizzando
Il sistema e rendendolo piu' stabile e affidabile, molto più della versione di fards. Solamente la 2.4rev.a e' una semplice traduzione, anche se inserendo tutti i tweaks provati e riprovati, ha migliorato anche quella. Nella 2.5 ho fatto delle piccole modifiche al kernel della 2.4, l'ho inserito nella mia 2.1, ho sperimentato con il file amss ore di ottimizzazioni, e ho modificato il tema....nel forum del dell streak c'e' chi ha fatto molto meno e ha spacciato il suo lavoro come "nuova rom", senza fare nomi....provatela prima di parlare senza cognizione di causa, questa E' una nuova rom....
TO UNDERSTAND USE GOOGLE TRANSLATE, YOU CAN FIND IT IN THE MARKET....
I think DJ_Steve and fards should go and find some new name for their work.
/sarcasm
--
There's only three kernel versions for 2.3 - built by DJ_Steve, built/fixed by fards and kind of official beta, probably leaked from Olleh.
_n0p_ said:
I think DJ_Steve and fards should go and find some new name for their work.
/sarcasm
--
There's only three kernel versions for 2.3 - built by DJ_Steve, built/fixed by fards and kind of official beta, probably leaked from Olleh.
Click to expand...
Click to collapse
That's why 2.4 IS beta 3....
Name has changed, but the "substance" remains....
maxicet said:
That's why 2.4 IS beta 3....
Click to expand...
Click to collapse
I still can`t understand which version you call 3: the original by Olleh? or the changed versions by DJ_Steve or by fards? (I need to know it for making a decision which version to choose)
This cant be overclocked right? im stuck at 998
maxicet said:
Simply open the app, reclose it, then restart launcher...now the app is in your language..
Click to expand...
Click to collapse
Thank you that worked. Keep up the good work!
It is very stable. No more random reboot to me. Thank you Maxicet~
Sent from my Dell Streak using XDA App
same here. cant overclock, and also the audio is horrible, in phone calls and music, very distorced in listening and in speaking. anyone else have this prob?
00roberto00 said:
same here. cant overclock, and also the audio is horrible, in phone calls and music, very distorced in listening and in speaking. anyone else have this prob?
Click to expand...
Click to collapse
WHO said that it's an overclocked kernel??
Audio distortion?? Did u install any equalization app or something else? Never had audio problem, I think that this kernel gives better audio listening experience, without the random scratches of earlier fards kernel...did u do factory reset?
maxicet said:
WHO said that it's an overclocked kernel??
Audio distortion?? Did u install any equalization app or something else? Never had audio problem, I think that this kernel gives better audio listening experience, without the random scratches of earlier fards kernel...did u do factory reset?
Click to expand...
Click to collapse
no i dont have any equalization app and, btw, i dont think they work on phone calls but only on music.
yes i did the factory reset, before and after flashing.
before this i had the djsteve 1.9 and the audio was...sufficient...(compared to the i**** audio) but not so bad like now.
maybe its a problem of my streak only.
anyway the rom at 998 is faster than the djsteve 1.9 at 1200, it runs spb 3d without the problems i had before.
another question: why u suggest not to restore apps/data from titanium backups?
thanks
00roberto00 said:
no i dont have any equalization app and, btw, i dont think they work on phone calls but only on music.
yes i did the factory reset, before and after flashing.
before this i had the djsteve 1.9 and the audio was...sufficient...(compared to the i**** audio) but not so bad like now.
maybe its a problem of my streak only.
anyway the rom at 998 is faster than the djsteve 1.9 at 1200, it runs spb 3d without the problems i had before.
another question: why u suggest not to restore apps/data from titanium backups?
thanks
Click to expand...
Click to collapse
Yes, I think it could be a problem with your device...
About titanium, it's a knowed issue, you may have stability problems...
Hi there,
i'm a new user and i write from Italy.
I really appreciate your board, from which i've learned many useful things.
I just bought (well actually it was a present, anyway) an Olivetti Olipad 100, which is in fact a Malata Zpad T2, and i was looking for a good almost full-working Honeycomb ROM.
Already tried Flashback(the one that i'm using right now) and Gtabcombover, but the problem is that these roms are "born" for Gtab, which lacks a 3g modem, so this feature of my device is not working.
The only ROM i installed that guaranteed this was Adamcomb, anyway it's pretty unstable.
Could you help find the proper ROM for my tab or also to activate the 3g support on another rom?
Thanks.
P.S.
I apologize if i wrote something stupid/non-sense.
180 views and no ideas?
itsbasix said:
180 views and no ideas?
Click to expand...
Click to collapse
We are stumped on this one.
As there are only "custom" ROMS for HC and ICS, most of which are WiFi;
it appears no one has approached this issue.
Sorry
itsbasix said:
Hi there,
i'm a new user and i write from Italy.
I really appreciate your board, from which i've learned many useful things.
I just bought (well actually it was a present, anyway) an Olivetti Olipad 100, which is in fact a Malata Zpad T2, and i was looking for a good almost full-working Honeycomb ROM.
Already tried Flashback(the one that i'm using right now) and Gtabcombover, but the problem is that these roms are "born" for Gtab, which lacks a 3g modem, so this feature of my device is not working.
The only ROM i installed that guaranteed this was Adamcomb, anyway it's pretty unstable.
Could you help find the proper ROM for my tab or also to activate the 3g support on another rom?
Thanks.
P.S.
I apologize if i wrote something stupid/non-sense.
Click to expand...
Click to collapse
Hi itbasix,
I'm currently using an olipad 100 with adamcomb 0.3 and ugo's kernel and I don't have any issue,everything works well
P.S I'm from Italy too
Inviato dal mio Adam usando Tapatalk
( Ti scrivo in inglese che magrii sto post interessa a qualche altro poveraccio come noi)
Ho provato adamcomb ma ogni tanto crashava e l`ultima volta non mi faveca accedere al mrket nemmeno (errore di comunicazione col server o una cosa del genere)
------------------------------------
Tried adamcomb but it crashes sometimes and it doesn`t let me connect to the market (server connection error or something like that)
(rispondo in inlgese )
To correctly install Adamcomb I have followed this guide ht tp://olipad-honeycomb.blogspot.com/2011/09/guida-installare-honeycomb-nellolipad.html and used the adamcomb rom attached, maybe this is customized to be more stable on adamcomb, take a look at it
I used it but i got the issues i already told you (market not working, unstable 3g connection)
also the link provided in that page isn't working anymore
itsbasix said:
also the link provided in that page isn't working anymore
Click to expand...
Click to collapse
Tried the link now and it is still working, there was a space in http
http://olipad-honeycomb.blogspot.com/2011/09/guida-installare-honeycomb-nellolipad.html
any news about Olivetti OliPad 100 ?
Ciao,
I'm italian too, writing from Rome.
I've bought an OliPad 100 and I've tried several ROMs for the same reason, like these:
1.Cyanogenmod 7.0.3
2. Cyanogenmod 7.1.0.1
3. Gingerbred 2.8 (not working at all)
4. gtabcombover-3.4.2 (honeycomb)
In any case I'm not able to download many apps using the official market or from "Google Play". I mean like Maps, Skype, Facebook, Youtube, Waze (and so on).
Any news from you ?
Have you found something very interesting that is working fine ???
Please, let me know.
Betst regards,
JM
I just installed this on my OliPad:
http://forum.xda-developers.com/showthread.php?t=1645420
But the touch panel ain´t working Does someone know a kernel to fix this :-D?
question can i upgrade froyo 2.2 into gingerbread or even honeycomb 3.3
lnz said:
Hi itbasix,
I'm currently using an olipad 100 with adamcomb 0.3 and ugo's kernel and I don't have any issue,everything works well
P.S I'm from Italy too
Inviato dal mio Adam usando Tapatalk
Click to expand...
Click to collapse
RE: olipad 100, froyo 2.2,
question can i upgrade froyo 2.2 into gingerbread or even honeycomb 3.3
dear friends- adroid experts,
i have problem with my olipad100- froyo 2.2, even the tablet can be switched
on the applications stop suddently (tap and tap) therefore no longer can be
used. i am just wondering if i can get backup software or even upgrade
software (gingerbread?) that i can install by myself via desktop? as usually
if i have problem with olipad i can reset to factory setting. however the
current condition when i want to access the setting the tablet said the
application stop suddently, try again later, and force stop.
i already tried to reset by pressing the on/off button but seems not working this time.it pops adroid.process.media, adroid.process.acore stop working, force stop message.
finally thank you for your time, attention, help and looking forward to hear
from you again soon.
best regards,
widi
mie esperienze olipad 100
:ciao a tutti, visto che questo modello ha avuto da noi i n Italia lo stesso successo del toshiba folio 100 in un, tanto vale scrivere come mangio....
Io ho provato varie rom, la più stabile che ho provato e una 4,2,1 Ada nozioni basata su cyanogrenmod 10.1, se a qualcuno interessa magari posso fornire dati più precisi.
Impraticabile funziona abbastanza bene in WiFi, in 3g non ho ancora provato, non funzionano sicuramente n:
Fotocamera
Incline. Eri per rotazione e automatica (uso un app per farlo)
La tastiera (uso anche qui un app perché faceva il matto)
Il volume mi sembra basso rispetto alla origine e distorto
Se vi va possiamo. Fare un i croci di esperienze. Fate. I sapere e scusate eventuali castronerie.. Un saluto a tutti e auguri in anticipo
mad:
joemolls said:
Ciao,
I'm italian too, writing from Rome.
I've bought an OliPad 100 and I've tried several ROMs for the same reason, like these:
1.Cyanogenmod 7.0.3
2. Cyanogenmod 7.1.0.1
3. Gingerbred 2.8 (not working at all)
4. gtabcombover-3.4.2 (honeycomb)
In any case I'm not able to download many apps using the official market or from "Google Play". I mean like Maps, Skype, Facebook, Youtube, Waze (and so on).
Any news from you ?
Have you found something very interesting that is working fine ???
Please, let me know.
Betst regards,
JM
Click to expand...
Click to collapse
hi
Im new to android and need some help.
I have a s3 and it shows that im on the latest version, however the latest version has a brightness slider in the notification bar and i dont.
Is there a way of getting this on my phone?
Please explain clearly as all this is new to me
And how do i flash a custom rom and which one is the best??
Seems like u r talking about some custom ROM (not sure)
Any ways u can root ur mobile by flashing clock work mode and installing super user or supersu
To install custom ROM you may read information on how to flash it, on the page itself
Just have a look at S3 development page
(All stable ROMs are there)
Which one is best?
It completely depends on you
What u want on ur devices
Sent from my HTC One X using xda app-developers app
mzr07 said:
hi
Im new to android and need some help.
I have a s3 and it shows that im on the latest version, however the latest version has a brightness slider in the notification bar and i dont.
Is there a way of getting this on my phone?
Please explain clearly as all this is new to me
And how do i flash a custom rom and which one is the best??
Click to expand...
Click to collapse
You need to download the latest firmware and flash it on to your phone via Odin typically OTA updates are slower. look through the general threads and find the one for your region and or just download the latest UK one which seems to be the best FW: LG8 is what I'm using.
Have you installed a custom rom or rooted your sgs3 before? & is this phone new or have you bought from a friend? If the answer is No & the phone is brand new, go into the android development section & look in the sticky section & find the post on how to root, unlock sim & install drivers to PC! There is a easy 1 which after installing drivers its just a matter of pressing the right buttons to unlock sim, root, cwm, install busy box or what ever else you need to do before flashing a custom rom.... & the main thing before installing that is making a backup via cwm!!!! Then & only then your ready to flash your 1st rom, choose which one you want cause there's loads, backup your SD card to the PC in case you have any data you don't wanna lose, put the custom rom zip on you internal memory on on your SD card! Then go into recovery mode & wipe factory data & install zip from SD card, select the custom rom zip you choose for the sgs3 & once its loaded the zip & finished reboot! Now enjoy your new rom & if you plan on installing any theme zips only do this after you have rebooted the phone again & not before! If anything goes wrong enter recovery mode & flash the backup you made earlyer after you rooted your phone. I know it sounds like this all will take ages but it should only take you 10mins - 30mins to do from start to finish! Maybe even less time.... I'm just covering all bases because its your 1st time flashing a custom rom!
Hope this helps you mate & if it does don't forget to press the thanks button if it has :0) welcome to xda & the world of flashing & Modding!!!!
sent via my super modded sgs3 from xda premium app!!!! ;0)
mzr07 said:
hi
Im new to android and need some help.
I have a s3 and it shows that im on the latest version, however the latest version has a brightness slider in the notification bar and i dont.
Is there a way of getting this on my phone?
Please explain clearly as all this is new to me
And how do i flash a custom rom and which one is the best??
Click to expand...
Click to collapse
If you just want to install the latest update..just connect your phone to kies via ur pc and check for updates..sometimes ota updates are late..
If you want to do it yourself..it is a multistage process..
Step 1: root your phone..go and check the stickies in this section..
Step 2: install a custom recovery..it generally gets installed when you root ur phone..the function of a recovery is provide an interface between your bootloader and ur rom ..in simple terms..so that u don't mess with important stuff..
Step 3: find the best custom rom which fits ur tastes..u can either install a stock rom or modded stock rom..find it in android development section..for aosp roms, compiled from Google binaries directly go to original android development section..
There is no best custom rom..all roms are good depending on what u want..start checking them out
Step 4: installing any rom in a nutshell will require u to put the zip file on sdcard..reboot into recovery : volume up + home+ power button..wipe data/factory reset->wipe cache->advanced->wipe dalvik cache..
Choose zip from sdcard->navigate to the zip file and install
After that wipe cache and dalvik cache again..
Step 5: reboot system now
Uff..it was difficult to type this much on a phone
Hit thanks if I helped..
Sent from my GT-I9300 using xda app-developers app
нет сим карты
ребят,нужна помощь,телефон перестал видеть сим карту,флешка,вай фай,блютус,всё работает,иногда отключаю автономный режим и снова симка работает,но потом пишет уведомление, мол симка извлечена,поставьте рабочую сим карту и перезагрузите устройство,иногда наоборот другое пишет, сим вставлена перезагрузите устройство,или нет сим карты,пробовал поменять новый сим райдер,ну куда симка вставляется,не помогло,симку менял ,тоже не помогло...у меня европеец,мастер один говорит мол с европейцами такое чп случилось,моросит процессор,а с рст нет...мож есть у кого мнение по поводу что делать?пробовал прошивать на овициальную трёх файловую 4.1.2 с бутлойдером и с пит фалом,непомогло...помогите советом...
guys need help, the phone stopped seeing the SIM card memory stick, Wi fi, Bluetooth, it works, sometimes disconnect offline and again sim works, but then writes a notice saying sim removed, put a working SIM card and restart the device, sometimes vice versa another writes sim inserted reboot the device, sIM card or not, I tried to change a new sim rider, well, where sim is inserted, did not help, Simcoe changed, too, did not help ... I have a European, one master says they say to the Europeans is chp happens, it drizzles processor, and the PCT is not ... can anyone have opinions about what to do to try to stitch three ovitsialnuyu file 4.1.2 with butloyderom and the pit tether, nepomoglo help advice ... ...
Post a question do not hijack year old threads .
Very difficult to understand your post but i suggest you factory reset first .
jje
Ho deciso di installare una Rom
BEFORE YOU INSTALL A ROM
KITKAT IS A SYSTEM THAT SAMSUNG HAS DEDICATED TO PHONES THAT STARTS FROM 2 GIGA RAM
KITKAT IS A SYSTEM THAT THE DEVELOPERS ARE ABLE TO RUN ON 1 GIGA RAM
Firstly you must understand that until a few weeks ago Samsung has put in a drawer the project to bring KitKat on our beloved S3 and then thanks to some developers today this project is slowly becoming more and more concrete, when you download a rom you have to understand how many hours and how much work puts a developer to realize a Rom, in my opinion we should give respect to those developers who devote their time and their terminals to this passion, and also they let us dream that such a project is about to become reality.
So my dear friends whenever you make a request or have any questions think always about respect, kindness, don’t claim and don’t be arrogant because ur asking somthing to a persone that developes for passion and is this passion that makes him to take the decision to share it with us and with you.
One more question between friends, how many updates Samsung pull out before they make a stable firmware? How many months we expect sometimes an update that never seems to arrive? Well these developers have started about 4 weeks ago a project that seems to weigh only 700/800/ or 1000MB but in terms of development its really a huge weigh.
A big thanks to XDA and all developers.
DEDICATED TO MY FRIEND BULLDOG74TS
---------- Post added at 07:36 PM ---------- Previous post was at 07:01 PM ----------
mzr07 said:
hi
Im new to android and need some help.
I have a s3 and it shows that im on the latest version, however the latest version has a brightness slider in the notification bar and i dont.
Is there a way of getting this on my phone?
Please explain clearly as all this is new to me
And how do i flash a custom rom and which one is the best??
Click to expand...
Click to collapse
INSTALLIAMO
Ti consiglio la Galaxy s5 mini V12 di Bulldog74ts
Queste sono manovre che faccio di solito io quando installo (Se vuoi falle con me ma a tuo rischio e pericolo).
Ricordati sempre di fare un backup della cartella EFS "(IMPORTANTISSIMO)".
Scarichiamo una rom a caso e mettimola sulla SDcard esterna.
ORA
Parto dal presupposto che voi abbiate già una recovery modificata e se non fosse così,ci sono tante valide guide su XDA che ci guidano passo passo su come installarla.
Bene tra le tante opzioni che una recovery modificata consente e quella di fare una profonda pulizia del terminale:
(1)
PULIZIA DEL TERMINALE
Entriamo in recovery premendo contemporaneamente i tasti Vol+/tasto Home/e Power,quando appare la scritta iniziale Galaxy S3 rilasciamo solo il tasto power e dopo pochi secondi siamo in recovery.
(2)
Incominciamo dal wipe data/factory reset (dare comando)
Clicchiamo su wipe cache partition ("""""""""""")
Clicchiamo su advance/wipe dalvik cache ("""""""""""")
Clicchiamo go Back
Clicchiamo mount and storace e ci portiamo sui format:
Clicchiamo format/system (dare comando)
Clicchiamo format/cache ("""""""""""")
Clicchiamo format/preload ("""""""""""")
Clicchiamo format/boot ("""""""""""")
No pulizia modem
Clicchiamo /data and/data/media (/sdcard)("""""""""""")
PULIZIA DEL TERMINALE FINITA: (Importante per chi arriva da 4.1.2/4.3).
(3)
Portiamoci ora su install zip e nel menu ci portiamo su choose zip from /storace/sdcard ora nel menu portiamoci dove abbiamo messo la nostra rom e clicchiamoci sopra,clicchiamo su yes-install galaxy S5 Mini 12 Edition.zip e lascia finire l'installazione della rom,quando è finita clicchiamo sul tasto della recovery ++++++Go back++++++ e successivamente su reboot system now,a questo punto la procedura di installazione e finita e non ci resta che attendere pochi minuti per arrivare alla prima configurazione guidata della rom.
(4)
Bene amici ora avete sul vostro terminale la S5 Mini Edition V12 equipaggiata con un 4.4.2 KitKat.
Incominciamo la configurazione:
Scegliamo la nostra lingua.
Immettiamo il codice WI-FI se si é possessori di una rete.
Immettiamo la nostra email di google con relativa password.
Immettiamo """"""""""""""" dell'accaunt Samsung.
Terminiamo la configurazione guidata.
Disclaimer: I'm not the developer of the ROM, and I'm not a developer at all.
Always do a backup before flashing!
This is my version of the MIUI 9 project published on Romzj.
V1:
Based on 8.1.4 version
Full debloated
Pre-rooted with Magisk Manager
Google apps preinstalled, with GBoard keyboard
Global apps and icons (with support to Google Apps icons, and other icons not supported by default)
Original Dolby from LeEco (no ported version, or Magisk module, see below for guide to enable)
V2:
Changelog:
Ported LeEco 28s stock Camera
Replaced Remote Control app with the more updated and translated version
Fixed missing Download app (thanks for the suggestion @PieroAnt)
Replaced theme with the stock global modded to support thirdy part apps icons
Tweaked updater-script for a better and cleaner installation
First boot can take about 10 minutes, so, don't have a stroke
KNOWN BUGS
- Attempting to copy an URL on Chrome, will cause the crash of Chrome itself. A workaround is to copy the URL without clicking on it, so it has to be not selected before you long press to copy. I know it's hard to explain, so I will post some images or maybe a little video later.
- On the first opening of the messages app, it asks if you want to enable Smart Messages. If you choose to not enable, then the app opens, with a little banner that tell you again if you want to try the Smart Messages feature. If you close this banner, then the app will begin to be unstable, crashing in a random way. So, avoid to close that banner.
An image that explain what I'm referring to: https://i.imgur.com/Q0FvTQ2.jpg
- Other bugs I've not found.
HOW TO ENABLE DOLBY
I used the original LeEco Dolby Atmos from latest 28s ROM, which guarantees the best audio quality.
To enable it, download Quickshortcutmaker from Play Store, then go to Security App-->Permissions-->Permissions-->Quickshortcutmaker, and enable permission to create shortcuts on default screen. Then, open Quickshortcutmaker, search Dolby activity, and create a shortcut to it, so Dolby will appear on the home screen. Open it, and enable.
ABOUT LOCATION SERVICES
I deleted the default chinese location services, to use the google services instead. This means that, on the first boot, location services will not work, because it requires first to configure Google. So, after the initial setup, open Play Store to add the Google Account, and after finished configuration, reboot the phone to get location services working.
HINTS
- On messages app settings, disable the delivery status option, to avoid loss of credit on your SIM.
- If you have issues with notifications, try to:
add the app having issues to automatic startup, on Security app;
lock the app on recent apps window;
on Security app-->Battery-->App battery saver, select the app, and check "No restrictions";
on developer settings, disable memory optimization, and reboot.
if still having problems, download Root Push Notifications Fixer, and set to 5 minutes.
XDA:DevDB Information
MIUI 9 Bygepp's Edition, ROM for the LeEco Le Max 2
Contributors
Bygepp
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Beta
Created 2018-01-11
Last Updated 2018-01-12
DOWNLOAD
PREVIOUS VERSIONS:
7.12.28: https://drive.google.com/file/d/1iGiDrAaqh1Mhb38koKCs-nWImNQgrZBu/view?usp=drivesdk
8.1.4 V1: https://drive.google.com/file/d/17fgJDfNcQ_f9uxBHQKlIeFhz0r6UyQK3/view?usp=drivesdk
LATEST VERSION:
8.1.4 V2: https://drive.google.com/open?id=1U2PAjsFZ-1bUUdnshDrgJVhDygFWnerL
This is an initial version, tomorrow I will try to integrate the stock LeEco Camera from 28s, and the global LeEco Remote Control.
Thank you I'm going to try it out.
So install and 1st boot take a long time. But it does boot. Everything really smooth so far. I'll test this out for a day and report back.
allrockedout said:
Thank you I'm going to try it out.
So install and 1st boot take a long time. But it does boot. Everything really smooth so far. I'll test this out for a day and report back.
Click to expand...
Click to collapse
Thank you for trying.
Bygepp said:
Thank you for trying.
Click to expand...
Click to collapse
Very good you played early. I am glad that the MIUI rom will be followed by more people on XDA because it is in my opinion the best rom in terms of personalization, functions and stability. I had already tried this version in the original version, before going back for too many Chinese applications installed. I'm curious to try it waiting for the update to version 8.1.4.
Bravissimo hai giocato d'anticipo. Sono contento che la rom MIUI venga seguita da più soggetti su XDA perché è secondo me la rom migliore in quanto a personalizzazione, funzioni e stabilità. Questa versione la avevo già provata in versione originale, per poi tornare indietro per le troppe applicazioni cinesi installate. Sono curioso di provarla aspettando l'aggiornamento alla versione 8.1.4.
Help me. Delete account MIUI. Please.
thantuyenk7d said:
Help me. Delete account MIUI. Please.
Click to expand...
Click to collapse
Later I will try to do, did you forget the password?
Bygepp said:
Later I will try to do, did you forget the password?
Click to expand...
Click to collapse
Help me.please. I don't password.
Thank you very much for your effort, I will try it since I love miui, and see if notifications of the whassapp work well.
thantuyenk7d said:
Help me.please. I don't password.
Click to expand...
Click to collapse
Have you used MIUI before? You have to insert the password that you used in the past.
thantuyenk7d said:
Help me.please. I don't password.
Click to expand...
Click to collapse
Go to the MIUI website and cancel your account.
---------- Post added at 03:08 PM ---------- Previous post was at 03:03 PM ----------
Bygepp said:
Thank you for trying.
Click to expand...
Click to collapse
I installed the current version and after deleting system, date, cache and dalvilk I find the system exactly as I had left it, installed applications, icon positions, even the theme remained the same. In the settings, however, is version 7.12.28 and I find myself magisk that I did not have. What may have happened? If I had done a dirty flash I would have understood, but I deleted everything from twrp.
I've encountered a problem in the security app that does not scan for viruses. I tried to update, and then to remove the application, to version 2.1.2 but the problem remains.
Ho installato la versione attuale e dopo aver cancellato system, data, cache e dalvilk mi ritrovo il sistema esattamente come lo avevo lasciato, applicazioni installate, posizione delle icone, perfino il tema è rimasto uguale. Nelle impostazioni però risulta la versione 7.12.28 e mi ritrovo magisk che non avevo. Cosa può essere successo? Se avessi fatto un dirty flash lo avrei capito, ma ho cancellato tutto da twrp. Ho riscontrato un problema nella app sicurezza che non effettua la scansione antivirus. Ho provato ad aggiornare, e poi a rimuovere l'applicazione, alla versione 2.1.2 ma il problema rimane.
Does notification works perfectly or not.
Devanshu Biswas said:
Does notification works perfectly or not.
Click to expand...
Click to collapse
At the moment they seem to work, WhatsApp messages come to me even without having to open the application first.
PieroAnt said:
At the moment they seem to work, WhatsApp messages come to me even without having to open the application first.
Click to expand...
Click to collapse
ohh then this rom will rock ? only this single problem is irritated me but now i am happy that it is solved.
When connected to Bluetooth audio in car. Experienced a bootloop. Not sure if it was Bluetooth causing the problem or what.
Does the music app is in Chinese language?
Devanshu Biswas said:
Does the music app is in Chinese language?
Click to expand...
Click to collapse
No in your language
---------- Post added at 06:17 PM ---------- Previous post was at 06:16 PM ----------
allrockedout said:
When connected to Bluetooth audio in car. Experienced a bootloop. Not sure if it was Bluetooth causing the problem or what.
Click to expand...
Click to collapse
I check and report the result.
PieroAnt said:
I installed the current version and after deleting system, date, cache and dalvilk I find the system exactly as I had left it, installed applications, icon positions, even the theme remained the same. In the settings, however, is version 7.12.28 and I find myself magisk that I did not have. What may have happened? If I had done a dirty flash I would have understood, but I deleted everything from twrp.
I've encountered a problem in the security app that does not scan for viruses. I tried to update, and then to remove the application, to version 2.1.2 but the problem remains.
Ho installato la versione attuale e dopo aver cancellato system, data, cache e dalvilk mi ritrovo il sistema esattamente come lo avevo lasciato, applicazioni installate, posizione delle icone, perfino il tema è rimasto uguale. Nelle impostazioni però risulta la versione 7.12.28 e mi ritrovo magisk che non avevo. Cosa può essere successo? Se avessi fatto un dirty flash lo avrei capito, ma ho cancellato tutto da twrp. Ho riscontrato un problema nella app sicurezza che non effettua la scansione antivirus. Ho provato ad aggiornare, e poi a rimuovere l'applicazione, alla versione 2.1.2 ma il problema rimane.
Click to expand...
Click to collapse
Oh, really strange, if you full wipe, then everything has to be erased (excluding the internal storage).
Don't know what happened, I suggest you to reflash TWRP recovery, maybe is not working correctly.
For the antivirus, it was not working even in the original 7.12.28 ROM, I will test 8.1.4 version as quickly as possible.
Oh, veramente strano, se fai un full wipe, dovrebbe cancellarsi tutto (eccetto l'archivio interno).
Non saprei cosa sia successo, ti suggerisco di re-flashare la recovery TWRP, perché forse non funziona correttamente.
Per l'antivirus, non funzionava neppure nella ROM 7.12.28 originale, comunque, testerò la 8.1.4 il prima possibile.
allrockedout said:
When connected to Bluetooth audio in car. Experienced a bootloop. Not sure if it was Bluetooth causing the problem or what.
Click to expand...
Click to collapse
I will try it as quickly as possible, sorry for that...
For who want to try, here is the 8.1.4 version: https://drive.google.com/open?id=1WyqUSwGuyjZPM7AVSfcttxSUzv-S0MJQ
It is the original version without any edit, so it will have chinese apps and other bloatware.
here we go again !!!
another rom for the j5 prime M variant
and the last one bcs i sold it :silly:
Changelog:
Added smart view
latest oreo apps
added kernel manager
removed trial themes
busybox integrated with the rom
added pixel 2 sounds
added S9 sistem sounds
added some S9 apps
added S9 emojis
S9 wallpapers
battery life improved
performance improved
added boot image ( bootlogo still same )
some other stuff
added launcher selector
1° nova
2° stock samsung experience
3° lawnchain pixel launcher ( Idea by Crack Heros )
How to install for dummies:
1° must have latest firmware installed G570MUBU2BRA3 FOR M variant( search for it :victory: )
2° install my modded bootloader ( via odin ) : bootloader
3° install TWRP ( via odin ) : TWRP 7.0
4° must have downloaded the rom in the SD card
5° open twrp and make a full wipe ( dalvik, cache, system, internal memory and data )
6° install the rom and enjoy
Download link:
Limonade Ultimate Pro
Update:
Changelog:
Added multiuser
updated some apps
updated to february security patch
fixed some minor bugs.
Officially culminates the development for the j5 prime, thank you all for your support.
DOWNLOAD: Limo Update
Download For F n Y (test by your own risk):
Limonade Rom Pro for F n Y
The rom work in F variant ( already tested ) just need this fix to make camera works:
Camera Fix for F variant
tested in Y variant and is working, any bug in F or Y i WONT fix it
Limonade Ultimate Pro for Y variant with wifi fixed and more Thanks to @NiGhT6488
Limonade Ultimate Pro for Y
Oficial Telegram group for support and more: Tutibreaker Designs
ROM OS Version: 7.0.x Nougat
ROM Kernel: Linux 3.18.14
ROM Firmware Required: Stock Nougat Android 7.0
Status: Stable
Created 06-03-2018
Last Updated 16-03-2018
Ask me if you want to share my work in your blog or webpage
Hit Thanks if you like my work
Special thanks to:
@Zacharee1 for systemUI tuner app
@Sachin Kumar53 for AOD mod app
@jest002 for new bootlogo
@AlexVolzsk for fixed twrp
@NiGhT6488for the fixes for Y variant
Does this ROM has any known bugs? And does it work for SM-G570F ??
Rom Update
Limonade Ultimate Pro RC3 Changelog:
Updated to version G570MUBU2BRC2
march security patch
ram management by kernel
added latest AOD
added android P emojis
added graphics enhancement
some fixed and improvement
added dual speaker
clean some code
others stuff
actualizado a la version G570MUBU2BRC2
parche de seguridad de marzo
la administracion de ram la hace directamente el kernel
actualizado el AOD
actualizados emojis android P
agregadas mejoras graficas
algunos arreglos y mejoras
sonido stereo por defecto
limpieza del codigo
otras cosas
Download:
Limonade Ultimate Pro RC3
Download For F variant thanks to @bahaa66:
Limonade Ultimate Pro RC3 F variant
RumbleRamy said:
Does this ROM has any known bugs? And does it work for SM-G570F ??
Click to expand...
Click to collapse
read slowly the title and tellme me if your device is listed
tutibreaker said:
read slowly the title and tellme me if your device is listed
Click to expand...
Click to collapse
I guess its not listed I hope one day you do a port for the G570F variant.
Nice rom
working just fine on my G570F
SM-G570M , the Samsung manages to ruin the ROM but thank God you return Performance to our Prime!
Edited: if I try install via TWRP I get "Updater process ended with signal: 11 ... Error installing zip file", but if I install before the old ROM (NoteP.zip) then after I install this ROM (Limonade Ultimate Pro) it install normally without Errors.
Also I unchecked the "Reboot this device" option after finish the ROM installation (maybe some command in Script can make that Error).
Pregunta para que aparezca lo de wifi y batería así como en la imagen que se tiene que hacer habló de la barra de arriba
ROOT
Hola tutibreaker! gracias por tu trabajo y saludos desde Argentina, mi duda es si se puede hacer root a la rom stock con el BL y el TWRP que estan en este post, gracias de antemano.
Gracias voy a descargarla a ver como esta, Gracias desde Cuba
I'm having a problem with play store says to force close I can not add my account ..
how to install xpose
no notifications
"Officially culminates the development for the j5 prime, thank you all for your support." ... Thanks Man, Great rom for our J5prime.
I installed the Update and it is perfect... battery and performance are Wonderful !
disculpa con q bootloader lo isiste o lo isiste directo
makave77i said:
working just fine on my G570F
Click to expand...
Click to collapse
disculpa con q bootloader lo instalaste o lo instalaste directo
andreluizbarbieri said:
"Officially culminates the development for the j5 prime, thank you all for your support." ... Thanks Man, Great rom for our J5prime.
I installed the Update and it is perfect... battery and performance are Wonderful !
Click to expand...
Click to collapse
but theres no LED NOTIFICATIONS !!!!
makave77i said:
working just fine on my G570F
Click to expand...
Click to collapse
Does it has any popup window
makave77i said:
but theres no LED NOTIFICATIONS !!!!
Click to expand...
Click to collapse
Have no Led for notification in our J5 prime....
andreluizbarbieri said:
Have no Led for notification in our J5 prime....
Click to expand...
Click to collapse
For anyone who wishes to have led. Put this in system/etc
https://drive.google.com/file/d/1Zgl4CBmaRcnjY-QHsBglJQTtfEZVj0_g/view?usp=drivesdk
update help
how to update after flashing the original file