[Q] Greenify not working after update 2.4.3 update - Greenify

Earlier I was using Greenify 2.3.2 version. It was working well. After I updated it to version 2.4.3 I keep on getting the error message "Unfortunately Greenify has stopped working" and application crashes. I am on Carbon ROM CM11. Please Help!!

Problems here too!
Since last update (counting from this date) my Moto X is heating very much and rebooting!
Im not completly sure if Greenify is causing this problems, but Im goint to uninstall it to check.

Well, I am on 2.4.4 and do not face any such issues. In fact the last few updates were working without any issues at all.

Related

Need Help - Xposed not activating after reboot/Sense 6 Toolbox crash error

Hi guys.
I don't usually post looking for help because I'm usually successful with Google and searching here on xda...but I can't seem to figure out what's wrong with my case.
Just graded from Android Rev HD 63.0 to 70.0
Everything was working great in 63...once I upgraded to 70, Xposed stopped activating on boot and so did Sense 6 Toolbox.
Here's the run down:
HTC One M7 AT&T, Rooted (Super SU 1.94), S-ON, TWRP 2.7, been successfully running 63.0 since release with no problems. As soon I upgraded to 70, Xposed doesn't want to activate after a reboot (but it says it will Update/Install just fine).
This as a result has caused Sense 6 Toolbox to stop working with this error:
(Can't post picture, but this is the statement):
Unfortunately, the process com.android.systemui has stopped.
This only comes up when I attempt a SOFT REBOOT from Xposed to try and activate the Framework...though if I keep the Framework inactive (by just rebooting), this will NOT show up.
Even tried a clean wipe and reinstall from the ground up.
Can anyone else confirm these issues so I can confirm to myself that this is still a software issue and not something I'm doing wrong?
Thanks for the help! :good:
Best regards.
I also have this same issue.
I had this issue as well. What seems to have worked for me uninstalling Xposed 2.6 and Sense 6 Toolbox, then installing an older version of Xposed (2.5)

New SuperSU update (2.00) causes bootloop

Just wanted to say that, for me, and from many reviews in the Google Play Store, the new SuperSU causes a situation where the phone boots and finishes it's initialization but then reboots and gets stuck doing this. I resolved it by disabling SuperSU. My phone is bone stock except for being rooted.
Maybe the automatic update from the Play store caused the issue and I need to install the update through a different machanism? Anyways, disabling it solved the immediate issue, but I need and use SuperSU so I hope there is a general fix soon.
EDIT: I installed the update through TWRP, which seems to have solved the issue. Just wanted to put it out there for anyone having this problem.
Thank you for this information, this explains a problem I started having this morning.
Strange, I usually have ALL the issues, but I don't have this one.

Some Apps stuck on installing step after minor update

Today I had a small update to the OS of about 12MB. Normally when there is a major version update such as to Lollipop I reset the phone post install and reinstall and set everything up. But since this minor system update done via Settings...."Software update" quiet a few apps went through updates. The problem is a certain number of these apps are getting stuck on the Installing stage. I have to stop the Playstore app and disable the auto update for a handful of my apps that are having problems so that other apps can install. I have tried rebooting the phone with no success.
What I want to know is what is the correct procedure after a major or minor update to the Android OS?
Should one just reset and install everything again or is there a less drastic way of ensuring everything works cleanly?
Thanks

[Q] PA ROM weird issue!

After flashing the latest version( pa_i9300-5.1-20150528.zip) in recovery, 'Reboot System' reboots to recovery itself. Weird! So I flashed the earlier version(pa_i9300-5.1-20150520.zip) and it rebooted to system and it works. Now I get the OTA update in 'Paranoid OTA' app for the latest version that gave me problems. If I install,
1. Will there be any issues with reboot or any other related issues?
2. Should I reinstall installed apps after update?
Thanks 
Not sure if related but I installed pa_i9300-5.1-20150520.zip some time ago on my i9300, everything has been working nicely. Then came the 28th update and another one earlier this month... but installing those updates just resulted in a crash after installing (as in the boot screen looping). Now my system just popped up with an 20150619 update so I thought to try again, but again it download and installs just to loop the boot screen. This time thought I afterwards decided to re-install superSU and my boeffla kernel, that seemingly did something as the phone booted and update. Now maybe this is something one have to do for each update for it to work? I'd love to know for the future as I'm no expert on this, though if you have something similar maybe that's what is required.
Organizer21 said:
Not sure if related but I installed pa_i9300-5.1-20150520.zip some time ago on my i9300, everything has been working nicely. Then came the 28th update and another one earlier this month... but installing those updates just resulted in a crash after installing (as in the boot screen looping). Now my system just popped up with an 20150619 update so I thought to try again, but again it download and installs just to loop the boot screen. This time thought I afterwards decided to re-install superSU and my boeffla kernel, that seemingly did something as the phone booted and update. Now maybe this is something one have to do for each update for it to work? I'd love to know for the future as I'm no expert on this, though if you have something similar maybe that's what is required.
Click to expand...
Click to collapse
I think flashing the Kernel as you did after the dirty flash will help. But the there is no stable Kernel available for CM12.1, even the Boeffla you are using is in the alpha stage, no support yet! So how is the battery life and stability with Boeffla Kernel?

SuperSU 2.65 extreme battery drain

I just updated to SuperSU 2.65 this afternoon (update showed up in the play store). Ever since, my battery has been draining at >40% per hour (standby) and the phone is hot. I'm running a stock rooted ROM, and have been for months with no issues. I tried flashing an older version of SuperSU from TWRP and it didn't fix the issue (it also removed the companion app from my phone).
I'm fairly certain that updating SuperSU is what caused it, because the only other app that updated was Google Calendar. My battery app usage doesn't show anything out of the ordinary. Any ideas on how to get this straightened out?
Thanks!
dodgeboy said:
I just updated to SuperSU 2.65 this afternoon (update showed up in the play store). Ever since, my battery has been draining at >40% per hour (standby) and the phone is hot. I'm running a stock rooted ROM, and have been for months with no issues. I tried flashing an older version of SuperSU from TWRP and it didn't fix the issue (it also removed the companion app from my phone).
I'm fairly certain that updating SuperSU is what caused it, because the only other app that updated was Google Calendar. My battery app usage doesn't show anything out of the ordinary. Any ideas on how to get this straightened out?
Thanks!
Click to expand...
Click to collapse
SuperSU settings / Cleanup for Reinstall / Reinstall from Google Play.
If that does not help try,
SuperSU settings / Switch Superuser app / Reinstall from Google Play
dodgeboy said:
I just updated to SuperSU 2.65 this afternoon (update showed up in the play store). Ever since, my battery has been draining at >40% per hour (standby) and the phone is hot. I'm running a stock rooted ROM, and have been for months with no issues. I tried flashing an older version of SuperSU from TWRP and it didn't fix the issue (it also removed the companion app from my phone).
I'm fairly certain that updating SuperSU is what caused it, because the only other app that updated was Google Calendar. My battery app usage doesn't show anything out of the ordinary. Any ideas on how to get this straightened out?
Thanks!
Click to expand...
Click to collapse
Did you reboot after the install? MI E did for a few minutes till I rebooted to complete the binary update, after that it's been back to normal...
Zdeuce2 now with golden rays of sunshine

Categories

Resources