Help Plss. After flashing my rom Cm 11 4.4.2 Kitkat by Archi, im using after a mos, But now my phone suddenly restarting, and now its hanging only in samsung galaxy SII GT-i9300 logo only. Cant also enter CWM recovery mode. But i can enter Download Mode.. can anybody help me plss Thanks in advance.
mac123456789 said:
Help Plss. After flashing my rom Cm 11 4.4.2 Kitkat by Archi, im using after a mos, But now my phone suddenly restarting, and now its hanging only in samsung galaxy SII GT-i9300 logo only. Cant also enter CWM recovery mode. But i can enter Download Mode.. can anybody help me plss Thanks in advance.
Click to expand...
Click to collapse
Flash back to stock with Odin and don't forget to factory reset after flashing or you could even try flashing PhilZ recovery with odin boot into PhilZ after flashing and factory reset see if that works if not flash stock and start again.
tallman43 said:
Flash back to stock with Odin and don't forget to factory reset after flashing or you could even try flashing PhilZ recovery with odin boot into PhilZ after flashing and factory reset see if that works if not flash stock and start again.
Click to expand...
Click to collapse
Hi Tallman, Thanks for the help, Can you provide me the link, I have my EFS bakcup, I dont know wich stock rom should i get i forgot my baseband number, or the procedure of PhilZ. Thanks alot..
mac091889 said:
Hi Tallman, Thanks for the help, Can you provide me the link, I have my EFS bakcup, I dont know wich stock rom should i get i forgot my baseband number, or the procedure of PhilZ. Thanks alot..
Click to expand...
Click to collapse
Direct link https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/ you need the.tar.md5 version for Odin. PhilZ thread http://forum.xda-developers.com/galaxy-s3/orig-development/i93xx-philz-touch-t2002953 you can also backup efs with PhilZ recovery too.
tallman43 said:
Direct link https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/ you need the.tar.md5 version for Odin. PhilZ thread http://forum.xda-developers.com/galaxy-s3/orig-development/i93xx-philz-touch-t2002953 you can also backup efs with PhilZ recovery too.
Click to expand...
Click to collapse
Hi Tall man, Is it possible that my phone motherboard is broken?, my phone has no warranty and ive check it with samsung service center, after a few days of checking they call me and said that they need to replace the motherboard. and they charged me around 200$, hehehe
mac091889 said:
Hi Tall man, Is it possible that my phone motherboard is broken?, my phone has no warranty and ive check it with samsung service center, after a few days of checking they call me and said that they need to replace the motherboard. and they charged me around 200$, hehehe
Click to expand...
Click to collapse
Quite possible but have you tried all the options first like (1) flashing back to stock with Odin also if you have flashed back to stock with Odin did you factory reset after flashing? (2)rescue firmware (only use as last resort because it containes a pit file)
tallman43 said:
Quite possible but have you tried all the options first like (1) flashing back to stock with Odin also if you have flashed back to stock with Odin did you factory reset after flashing? (2)rescue firmware (only use as last resort because it containes a pit file)
Click to expand...
Click to collapse
ok thanks, Will get it back maybe later and i will update you what happen. Thanks. for the help... Is there any things that i can give back to you for helping me?
tallman43 said:
Flash back to stock with Odin and don't forget to factory reset after flashing or you could even try flashing PhilZ recovery with odin boot into PhilZ after flashing and factory reset see if that works if not flash stock and start again.
Click to expand...
Click to collapse
Hi tallman just got my SIII back from samsung service center, they said ther is an I C not working, but now justried to flash philz recover Odin failed to ans it says something non Pit file something like that.
If an IC isn't working then pay for the repair or buy a new phone, flashing won't fix a dead chip.
Related
After I turn on my Galaxy S II and it hangs for a few seconds and it reboot again and again..
Sometimes stuck on the home screen..
I really don't know why will this happen to my phone. I'm going to trip tomorrow..anyone can help me?
Model : GT-I9100
Android version : 2.3.3 (Stock ROM)
Rooted
garylaw said:
After I turn on my Galaxy S II and it hangs for a few seconds and it reboot again and again..
I really don't know why will this happen to my phone. I'm going to trip tomorrow..anyone can help me?
Model : GT-I9100
Android version : 2.3.3 (Stock ROM)
Rooted
Click to expand...
Click to collapse
boot to recovery,wipe cache and factory reset.
EDIT:Hold "home+volume up+power" all at the same time until recovery menu appears.
reflash with odin some stock firmware if you don't want to wipe, if there is no problem with wiping, just go to recovery and do a factory reset...this has a strong chance of success.
cooza said:
boot to recovery,wipe cache and factory reset.
EDIT:Hold "home+volume up+power" all at the same time until recovery menu appears.
Click to expand...
Click to collapse
borstri said:
reflash with odin some stock firmware if you don't want to wipe, if there is no problem with wiping, just go to recovery and do a factory reset...this has a strong chance of success.
Click to expand...
Click to collapse
After I hard reset and wiped cache..its still reboots..
Someone help me!! :'(
now it looks that only solution is to reflash, go to
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100&r=7#regiona
or
http://forum.xda-developers.com/showthread.php?t=1113928
find something u like and flash it with odin.
http://forum.xda-developers.com/showthread.php?t=1110160&highlight=odin+how+to
dont bother wit finding of exact fw. for you, find something that is for your region....
Is it flash it by using odin?
apsolutley with odin, since I suppose that you don't have cwm packed rom on SD card, because in that case does not matter if you have cwm recovery or not..., dont know if you have done it before...bat after beginners fear, it is actually peace of cake...dont be afraid, just follow instructions to the letter...
borstri said:
apsolutley with odin, since I suppose that you don't have cwm packed rom on SD card, because in that case does not matter if you have cwm recovery or not..., dont know if you have done it before...bat after beginners fear, it is actually peace of cake...dont be afraid, just follow instructions to the letter...
Click to expand...
Click to collapse
After I flashed it, it turns to the CWM screen and install the Multi-csc..something like that..and it reboot..after it reboot..its still turns to CWM and install the multi-csc.
So what should I do now?
you have done something wrong, or taken wrong rom image, since after flashing with ODIN stock rom you WILL ENDUP with stock recovery! Dont know what you flashed, but it was not stock rom.
What rom you took exactly??
"GT-I9100_SIN_I9100DXKI2_I9100OLCKH1_I9100DXKI1"
I flash this..is this a boot loop or other problem?
Hey dude, thanks for helping me so much..
My phone is working now..but I have to download my things again..=(
Alright. Thanks!
no problem, been in that situation. check some custom roms when u have time....you'll be amazed what this device can do.
and in clockwork recovery you have backup and restore, setup phone just how you like it, make a CWM backup and you are always sure that rescue is there....don't need odin or PC for that.
Flash Supercore with odin as PDA or some other kernel that has CWM recovery
The problem occured again just now, its after i dpwnlpad some apps from market..and its still not completely remove the hanging problem..And my laptop died. LOL.
Anyone here?
May i sugest u reflash stock rom and return it to the store.
If u have random reboot after flashing stock rom there is obviouse something wrong with your device.
hi
my gs2 turns on and reboot repeatly when i put micro sd card and install app in sd card .
help me too .
sorry for bad english .
garylaw said:
After I turn on my Galaxy S II and it hangs for a few seconds and it reboot again and again..
Sometimes stuck on the home screen..
I really don't know why will this happen to my phone. I'm going to trip tomorrow..anyone can help me?
Model : GT-I9100
Android version : 2.3.3 (Stock ROM)
Rooted
Click to expand...
Click to collapse
Your kernel is it also stock?
Hi all
I have recived a I9100 from a friend and I am trying to fix it for her... It went dead after she flashed a costum rom to her device...
Recovery does not work either
What I have tried
flashing a stock rom
flashing a kernel
flashing bootloader
flashing unbrick file using ASB box
flashing the handset with SPT box
flashing .pit
repartion
---------------------------------
SPT box flashing log
Detect Phone Connect ...
Connect Phone OK.
Get PIT for Mapping ...
Sending Boot Data ...
Sending Sbl Data ...
Sending Param Data ...
Sending zImage Data ...
Sending Factoryfs Data ...
Sending Data Data ...
Sending Cache Data ...
Sending Hidden Data ...
Please Wait Reboot Phone ...
Update Flash OK!
Total Time: 146.4 s
My guess is that it is NAND rw problem, and I will have to wait for my riff box service cables to arrive, so I can jtag it back to life (I have the box, they forgot to ship the service cables)
Any ideas is appriciated
Best regards
You actually see the logo? Can you get into Download mode? Not recovery.
If not you either need to Jtag or she has somehow triggered the super brick bug. Then the device can't even be repaired with the RIFF box.
TheSniperFan said:
You actually see the logo? Can you get into Download mode? Not recovery.
If not you either need to Jtag or she has somehow triggered the super brick bug. Then the device can't even be repaired with the RIFF box.
Click to expand...
Click to collapse
Yup, it is stuck at the Samsung GSII logo...
I can easily get into Download mode... But I have no recovery... Im thinking that it is a eMMC fault, I am trying to find a place to buy the eMMC and get it replaced/reballed
Well if you can get into Download mode, I'd suggest you try flashing the CM9 resurrection edition. It's the only "custom Rom installation package" I know that comes with everything to start from every base.
If it's really a broken emmc chip, you better have the knowledge to replace it yourself (or know someone who has). It's neither an easy nor cheap procedure.
TheSniperFan said:
Well if you can get into Download mode, I'd suggest you try flashing the CM9 resurrection edition. It's the only "custom Rom installation package" I know that comes with everything to start from every base.
If it's really a broken emmc chip, you better have the knowledge to replace it yourself (or know someone who has). It's neither an easy nor cheap procedure.
Click to expand...
Click to collapse
My brother has the right equipment at work...
I will try to flash that to it... Could you post a link??
Btw how am I supposed to flash it, as I have no recovery mode??
CM9 Resurrection is flashed via Odin in download mode.
MistahBungle said:
CM9 Resurrection is flashed via Odin in download mode.
Click to expand...
Click to collapse
Hmm can you post a link then?? I get a .zip that is CWM flashable
Ratata82 said:
Hmm can you post a link then?? I get a .zip that is CWM flashable
Click to expand...
Click to collapse
Im at a loss here... Why do you keep on going on about recovery mode," Hmm can you post a link then?? I get a .zip that is CWM flashable ", when you say you have none but can easily get into download mode!!!!.
As Mistahbungle said," CM9 Resurrection is flashed via Odin in download mode ".
Read the Galaxy S2 guide here how to use Odin is also there.
How to fix a soft brick is here
And CM9 Resurrection is here flashable via Odin
Hope you know what your doing.
bored_stupid said:
Im at a loss here... Why do you keep on going on about recovery mode," Hmm can you post a link then?? I get a .zip that is CWM flashable ", when you say you have none but can easily get into download mode!!!!.
As Mistahbungle said," CM9 Resurrection is flashed via Odin in download mode ".
Read the Galaxy S2 guide here how to use Odin is also there.
How to fix a soft brick is here
And CM9 Resurrection is here flashable via Odin
Hope you know what your doing.
Click to expand...
Click to collapse
I apparently only found the CWM files, instead of the tar, that's why I was talking about CWM... but it is still dead...
Okay, you must have misunderstood me... I know how to use Odin, I know how to recover from a Soft brick, I know how to recover from hardbricks using JTAG... I am not a noob
I have all Samsung professional tools, riff, SPT, medusa, asb etc...
Ratata82 said:
I apparently only found the CWM files, instead of the tar, that's why I was talking about CWM... but it is still dead...
Okay, you must have misunderstood me... I know how to use Odin, I know how to recover from a Soft brick, I know how to recover from hardbricks using JTAG... I am not a noob
I have all Samsung professional tools, riff, SPT, medusa, asb etc...
Click to expand...
Click to collapse
Then accept my appologies. the link to the CM9 odin flashable is live and it is a .tar file.
Good luck
bored_stupid said:
Then accept my appologies. the link to the CM9 odin flashable is live and it is a .tar file.
Good luck
Click to expand...
Click to collapse
Hehe, it is just okay...
When I flashed the CM9 to it, I got the kernel panic uploade mode... So my guess is still NAND/eMMC fault...
Strange one. It seems like a hardware fault. Good luck with repairing that. Usually a motherboard replacement would be the way to go.
Can you check if you're able to get into stock recovery after flashing a stock ROM?
I have had similar problems on both SGS2 and on Gtab 8.9 after performing factory reset in latest CWM. The only solution was flashing a stock ROM and then factory reset from stock recovery (and then flashing whatever ROM I wanted to flash in the first place)
Could be worth trying.
podumal said:
Can you check if you're able to get into stock recovery after flashing a stock ROM?
I have had similar problems on both SGS2 and on Gtab 8.9 after performing factory reset in latest CWM. The only solution was flashing a stock ROM and then factory reset from stock recovery (and then flashing whatever ROM I wanted to flash in the first place)
Could be worth trying.
Click to expand...
Click to collapse
It was a HW failure... I got it fixed under warranty, and they changed the PCB... Way more simple than changing the eMMC...
Best regards
bored_stupid said:
As Mistahbungle said," CM9 Resurrection is flashed via Odin in download mode ".
And CM9 Resurrection is here flashable via Odin
Hope you know what your doing.
Click to expand...
Click to collapse
Had the same problem, stuck in logo. I tried flashing stock ROM, but it didn't save my situation. So I tried flashing CM9 Resurrection and managed to get into recovery mode. Then I reflashed the custom ROM I had earlier on and everything went up again. Thanks a lot.
same issue
I am also stuck at Samsung logo, i9100
I can get into recovery. I installed stock many times - no help. (I9100XWMS1_I9100XXMS4_I9100NEELS1_HOME.tar.md5)
I was missing my IMEI so I guess it is the efs folder fault.
I tried to fix the efs with backups, I have zipped EFS, but I can not go to system and replace the files.
If you have any ideas - please share it with me!
I also had a nandroid backup - no help as well.
my sgs2 is softbricked and I have download AND recovery mode, and still can't fix it ;(
did you try this guide?
forum.xda-developers.com/galaxy-s2/help/guide-26-12-flash-stock-firmware-rom-t2365701
I tried rooting my friend's galaxy s2 (i9100) using odin but after it said PASS (on odin) the phone rebooted itself quitting download mode and then got stuck at the logo screen. Is there any way i can fix the phone? I used this file to root : GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9.tar
I hope someone can help me with as soon as possible, thanks.
aymanamrani said:
I tried rooting my friend's galaxy s2 (i9100) using odin but after it said PASS (on odin) the phone rebooted itself quitting download mode and then got stuck at the logo screen. Is there any way i can fix the phone? I used this file to root : GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9.tar
I hope someone can help me with as soon as possible, thanks.
Click to expand...
Click to collapse
going to recovery and make wype , problem fixed
nicola1989 said:
going to recovery and make wype , problem fixed
Click to expand...
Click to collapse
I can't go into recovery mode, download mode is the only accessible thing on the phone right now
aymanamrani said:
I can't go into recovery mode, download mode is the only accessible thing on the phone right now
Click to expand...
Click to collapse
on odin, did you click on repartition? if no i think you need to flash it again or try a other rom (or redownload) just to be sure its not the phone
KingOfDope said:
on odin, did you click on repartition? if no i think you need to flash it again or try a other rom (or redownload) just to be sure its not the phone
Click to expand...
Click to collapse
I did NOT click on Re-partition. I did what you have said before (flashed again // tried another rom // redownloaded the file) and the phone is still not working. I don't know what to do anymore. I'm afraid I bricked my friend's phone i was just trying to root it
aymanamrani said:
I did NOT click on Re-partition. I did what you have said before (flashed again // tried another rom // redownloaded the file) and the phone is still not working. I don't know what to do anymore. I'm afraid I bricked my friend's phone i was just trying to root it
Click to expand...
Click to collapse
I don't think its bricked... uhmm try to go back to stock rom
go to sammymobile.com and there you can your pda and stuff... I hope everything is gonna be alright
But why is the recovery mode not accessible?
If you were in the process of rooting only then how have you tried out different roms?
Does flashing a recovery itself cause a bootloop?
dude sometimes mine also not boots into recovery. U can flash siyah kernel 6b5 tar version through odin. that will most likely boot into recovery
sarfaraz1989 said:
dude sometimes mine also not boots into recovery. U can flash siyah kernel 6b5 tar version through odin. that will most likely boot into recovery
Click to expand...
Click to collapse
+1
Flashing Siyah.tar via odin was the way i went. And all was OK!
i have an unrooted unlocked samsung galaxy mega 6.3 gt i9200 from china i tried to flash an arabic rom using odin but it didnt work and now the phone is not working how can i fix it
dexzizo said:
i have an unrooted unlocked samsung galaxy mega 6.3 gt i9200 from china i tried to flash an arabic rom using odin but it didnt work and now the phone is not working how can i fix it
Click to expand...
Click to collapse
What isn't working? Did it flash successfully but not boot? Just do a factory reset. If it didn't flash completely, then you have to let us know what happened before it failed.
es0tericcha0s said:
What isn't working? Did it flash successfully but not boot? Just do a factory reset. If it didn't flash completely, then you have to let us know what happened before it failed.
Click to expand...
Click to collapse
i tried to flash a rom but failed now it says Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again
dexzizo said:
i tried to flash a rom but failed now it says Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again
Click to expand...
Click to collapse
Ok, so typically when people say they flashed a rom, that means a custom version through a custom recovery. But you said earlier you tried to install through Odin. This is an important distinction. If you tried to flash a custom rom and it didn't work, then flashing the correct stock firmware through Odin will resolve. If you flashed through Odin and it gave you that warning, then you need to find the right one and re-try.
es0tericcha0s said:
Ok, so typically when people say they flashed a rom, that means a custom version through a custom recovery. But you said earlier you tried to install through Odin. This is an important distinction. If you tried to flash a custom rom and it didn't work, then flashing the correct stock firmware through Odin will resolve. If you flashed through Odin and it gave you that warning, then you need to find the right one and re-try.
Click to expand...
Click to collapse
Yup what i tried to do is flash an arabic rom instead the Chinese stock one but if failed on the phone it said invalid at the end so if i flashed the Chinese stock one back from odin will it work or not
Yes, flashing the original firmware via Odin should get you working again.
es0tericcha0s said:
Yes, flashing the original firmware via Odin should get you working again.
Click to expand...
Click to collapse
will it work if i used samsung kies recovery
Possibly, but if the system had already been modified, I find Odin to be a more reliable fix.
es0tericcha0s said:
Possibly, but if the system had already been modified, I find Odin to be a more reliable fix.
Click to expand...
Click to collapse
well i flashed back the old rom and it worked but now i have no signal and there is no sound what can i go and there is 2 red lines on the top when i open the phone even the wifi doesnt work
Hi
I have a Samsung Galaxy Pocket Neo GT-S5310...
The sad thing is that, a while ago it stopped working and now it's stuck on the boot screen (Samsung GALAXY POCKET Neo GT-S5310)
I have tried to perform a factory reset through the built-in recovery mode (volume up + home + power), but unfortunately, I couldn't access the recovery mode and the phone goes directly to the boot screen.
And since the only thing I could do was accessing the Download Mode, so I tried to recover it by installing an official firmware with Odin3_v3.07... but it didn't solve the problem...
So what would you guys suggest?
can't delete this reply... could an admin please do it?
Installing cwn recovery and flash rom
D-Moon said:
Hi
I have a Samsung Galaxy Pocket Neo GT-S5310...
The sad thing is that, a while ago it stopped working and now it's stuck on the boot screen (Samsung GALAXY POCKET Neo GT-S5310)
I have tried to perform a factory reset through the built-in recovery mode (volume up + home + power), but unfortunately, I couldn't access the recovery mode and the phone goes directly to the boot screen.
And since the only thing I could do was accessing the Download Mode, so I tried to recover it by installing an official firmware with Odin3_v3.07... but it didn't solve the problem...
So what would you guys suggest?
Click to expand...
Click to collapse
The only way to :cyclops: the problem is to install cwn recovery and flash another rom .
see this thread to install cwn http://forum.xda-developers.com/showthread.php?t=2728655 ::silly:
and try this rom http://forum.xda-developers.com/poc...om-cm-11-0-galaxy-pocket-neo-duos-gt-t2833952
see this thread to find other rom http://forum.xda-developers.com/showthread.php?t=2731774:p
wipe data then flash the original FIRMWARE
Ashish1998 said:
wipe data then flash the original FIRMWARE
Click to expand...
Click to collapse
How can I wipe data if I can't access the recovery mode... :/
D-Moon said:
How can I wipe data if I can't access the recovery mode... :/
Click to expand...
Click to collapse
hey bro..
:silly: installing cwn recovery via download mode is the only way to bring back ur device
sksenthil said:
hey bro..
:silly: installing cwn recovery via download mode is the only way to bring back ur device
Click to expand...
Click to collapse
actually the only way would be flashing the bootloader, unfortunately I couldn't find it anywhere... the official firmware (from sammobile or samsung-updates) does not contain the bootloader flash...
Download stock from sammobile.com and flash it via Odin
Hackerpunk1 said:
Download stock from sammobile.com and flash it via Odin
Click to expand...
Click to collapse
read my previous reply... :/
D-Moon said:
read my previous reply... :/
Click to expand...
Click to collapse
What are the files in the firmware you downloaded?
Hackerpunk1 said:
What are the files in the firmware you downloaded?
Click to expand...
Click to collapse
S5310XXAMK1_S5310OJVAMK3_S5310XXAME1_HOME.tar.md5
and
SS_DL.dll
Which version of Odin are you using?
Hackerpunk1 said:
Which version of Odin are you using?
Click to expand...
Click to collapse
3.09
Sent from my GT-I9300 using XDA Free mobile app
Just load the file "S5310XXAMK1_S5310OJVAMK3_S5310XXAME1_HOME.tar.md5" ONLY in the PDA section. Please make sure you have the right drivers installed.
stuck in bootloop ...
Hi all, i can't find topic for Samsung s5303, and i have a problem with this device.
someone can help me ?
→ the phone stuck in bootloop ←
- i can start in download mode and get connected in odin.
i had flash all the 12 roms that i have found, (including custom roms and stock roms, only one package/ full package using re-partition with .PIT files. and various kernel models)
i made all wipes, (after and before flash a rom)
when the phone try to boot up, don't appear nothing about
errors (like can't mount data reboot or others...)
the phone try to boot up and keep in samsung logo, after 30 seconds i have a full shutdown, are not possible to turn on using power button..
if i take off the battery and reinsert after 1 minute, phone try to turn on and repeat the same thing
(have happened in all firmwares found)
are a hardware problem ?
may be someone have an idea to fix this issue?
since now, thanks.
Cant boot to recovery
Hi sorry for the thread revival but I have run out of ideas. Same problem as OP. Odin flash is successful but stuck on samsung logo when trying to boot to recovery.
S5310i 4.4.2
Any suggestions would be much appreciated. Anyone found a solution to this?
When you use Odin to flash, when it has finished, it always boot to recovery, there you have to wipe data and cache, then it works properly!
Hackerpunk1 said:
When you use Odin to flash, when it has finished, it always boot to recovery, there you have to wipe data and cache, then it works properly!
Click to expand...
Click to collapse
After flashing recovery with odin I am still stuck at the S5310 Neo splash screen unable to boot into recovery. Has this maybe got something to do with a conflict between android versions? As the S3510i comes with 4.4.2 stock, not 4.1.2.
Did you tried using the pit file for re-partitioning?
Hackerpunk1 said:
Did you tried using the pit file for re-partitioning?
Click to expand...
Click to collapse
Thanks for your help. Could you please explain more about this? Where would I find the pit file to flash? Do I tick re-partition in odin? Never flashed pit before. worried about bricking the device.
I am struggling to find the PIT file for my specific device (S5310i). its only on a handful of websites asking for paid subscriptions. Could anybody possible direct me to where I can find:
CORSICAVE3G_EUR_OPEN. Pit
I have downloaded the corsicass.pit and S5310_corsicass.pit but am not sure if this will work on any S5310 variant?