this is how to downgrade from NJ2 to NH6.
updated: Tested and fully working on NK1 and NK2.
updated: Tested on the latest firmware BOB1
i tried it my self everything working ok afterdowngrade
1- swithoff your galaxy grand 2
2- power on to download mode( volumedown+download+power)
3- open Odin choose NH6 tar file.
4-(most important) unmark auto Reboot, mark F. Reset time & Nand Erase All & phone bootloader update & phone EFS clear. see attached image
5-connect your grand 2 to your pc it will be shown in odin like com?
6-start odin to flash NH6 to your grand 2
7-when odin finish don't reboot just remove battery for 20 sec.
8- re-insert battery and power on in recovery mode( volume up+home+power)
9-leave it do its work till samsung logo appears on screen remove battery again.
10- re-insert battery power on to recovery mode.
11 - in recovery do factory restore twice then reboot.
congratulations.
this is very save no problems at all
u can see post#13 and #18 it is confirmed working 100%
u can follow same steps to downgrade any firmware to an earlier firmware like NH6 or NK1 to test modded roms by our developers
@ dr.moh1976 Bro now when you downgraded using this method does it show void count in the download mode just check it once..
Yes plz send a pic of downloading mod... plz
a small doubt
dr.moh1976 said:
this is how to downgrade from NJ2 to NH6.
i tried it my self everything working ok afterdowngrade
1- swithoff your galaxy grand 2
2- power on to download mode( volumedown+download+power)
3- open Odin choose NH6 tar file.
4-(most important) unmark auto Reboot, mark F. Reset time & Nand Erase All & phone bootloader update & phone EFS clear. see attached image
5-connect your grand 2 to your pc it will be shown in odin like com?
6-start odin to flash NH6 to your grand 2
7-when odin finish don't reboot just remove battery for 20 sec.
8- re-insert battery and power on in recovery mode( volume up+home+power)
9-leave it do its work till samsung logo appears on screen remove battery again.
10- re-insert battery power on to recovery mode.
11 - in recovery do factory restore twice then reboot.
congratulations
Click to expand...
Click to collapse
A small doubt if we select phone efs clear in odin will it not clear imei data of our phone, i had read in one of the topic in xda that the efs system data stores imei information of the phone....
Dont try this guys ! this will get u into alot of trouble
u will **** up ur warranty
kuldude said:
@ dr.moh1976 Bro now when you downgraded using this method does it show void count in the download mode just check it once..
Click to expand...
Click to collapse
after downgrade everything returns as before
Rahul10 said:
Yes plz send a pic of downloading mod... plz
Click to expand...
Click to collapse
this is the download mode after downgrade
Sanjuujosephh said:
Dont try this guys ! this will get u into alot of trouble
u will **** up ur warranty
Click to expand...
Click to collapse
thank you for your replay.
i don't post any thing i don't try my self
i downgrade my phone successfully then i root again then i restore my gennex 5sport backup successfully.
your warranty if void the time u root ur device
grohitsurana said:
A small doubt if we select phone efs clear in odin will it not clear imei data of our phone, i had read in one of the topic in xda that the efs system data stores imei information of the phone....
Click to expand...
Click to collapse
i am not expert
but honestly this is what i do exactly and it works for me
even i do the same before to downgrade NH6 to NH3 to try the turbo room of app01 and it was successfull
dr.moh1976 said:
i am not expert
but honestly this is what i do exactly and it works for me
even i do the same before to downgrade NH6 to NH3 to try the turbo room of app01 and it was successfull
Click to expand...
Click to collapse
if you can pls check in your phone & tell whether the imei no are still the same by dialing *#06#... after the downgrade from nj2 to nh6..it would be greatful of you if you could check & tell ..it would clear my doubts & i could also downgrade so tht in future i cold install custom roms without fear of bricking my phone
Plz any 1 check this and report back...
IMEI
grohitsurana said:
if you can pls check in your phone & tell whether the imei no are still the same by dialing *#06#... after the downgrade from nj2 to nh6..it would be greatful of you if you could check & tell ..it would clear my doubts & i could also downgrade so tht in future i cold install custom roms without fear of bricking my phone
Click to expand...
Click to collapse
really now i am on genNxt S5 port rom
but for you i repeat all this steps to give u my answer
the answer is yes
IMEI is the same on the package of my device
double check
Rahul10 said:
Plz any 1 check this and report back...
Click to expand...
Click to collapse
i checked it again now myself to give report about IMEI
it works fine no problem
IMEI same as on device package
binary=official
system=official
Did this work for anyone else.....?? @Sanjuujosephh u tried...?
Nah..... I won't take the Risk... .
Actually I'm starting to like this j2 update!!!
Seriously Bro there's no way u can stop Knox from triggering even if by luck this works.... U will have to either stay in a custom rom or Nh6...... So it's better to stay in j2....bcuz I'm in a month or so we might get a small update
Sanjuujosephh said:
Nah..... I won't take the Risk... .
Actually I'm starting to like this j2 update!!!
Seriously Bro there's no way u can stop Knox from triggering even if by luck this works.... U will have to either stay in a custom rom or Nh6...... So it's better to stay in j2....bcuz I'm in a month or so we might get a small update
Click to expand...
Click to collapse
Ohk.. bro i was helping waseem with his mods and providing him support here and there... so for this i need a root.... after this j2 it's impossible to anything.... and small update will some stability one coz sammy can't give us os update... so wanted someone else to test this one out..
Any one got successful by this method..?
Rahul10 said:
Any one got successful by this method..?
Click to expand...
Click to collapse
Working 100%
working 100%
Rahul10 said:
Working 100%
Click to expand...
Click to collapse
thanks for feedback
dr.moh1976 said:
thanks for feedback
Click to expand...
Click to collapse
Working like charm feels like heaven coming back to nh6 with a rooted device... a big thanks to dr.moh1976 all those who are still thinking to downgrade should do this... no bootloops no bricking clean downgrade...
Related
I'm very curious about flashing ROMs. Now I have problem with my funbook infinity but I have all flashing softwares which is required for flashing like Original Funbook Factory Image, Livesuit, USB drivers etc. I'm scared and in doubt that will flashing my tab will fix all problems. I want to be confirmed that flashing will help me to fix my problem with the tab and it will not do any permanent damage to my funbook tab.
1- will it solve problems?
If software problem, probably. If hardware problem, definitely not.
2- got risk of bricking/damaging/create more problems?
There's always risk.
Sent from your phone
No Not All
Flashing Of Rom Only Fixes Missing File Problem ;incompability but not any hardware Problem.......
Tegroid said:
I'm very curious about flashing ROMs. Now I have problem with my funbook infinity but I have all flashing softwares which is required for flashing like Original Funbook Factory Image, Livesuit, USB drivers etc. I'm scared and in doubt that will flashing my tab will fix all problems. I want to be confirmed that flashing will help me to fix my problem with the tab and it will not do any permanent damage to my funbook tab.
Click to expand...
Click to collapse
Before even flashing a rom, what's wrong with it?
Sent from an Xposed LG-G2/LS-980
if you take the right procedure,flashing rom will not make any permanent damage to your funbook.
in my experience flashing rom is make our device back to original if you flash factory rom.
if problem come from OS yes your problem will fix,
but if problem come from hardware like camera ic, lcd etc. no you can't fix your problem
Driver
rahulraz said:
Flashing Of Rom Only Fixes Missing File Problem ;incompability but not any hardware Problem.......
Click to expand...
Click to collapse
If I flash my tab with livesuit then does it will need the google USB driver or my funbook device driver distributed from its official website.
Critical Detox said:
Before even flashing a rom, what's wrong with it?
Sent from an Xposed LG-G2/LS-980
Click to expand...
Click to collapse
To know about my problem goto ->http://forum.xda-developers.com/showthread.php?t=2583218&highlight=reset+after+every+reboot
have you try enter to recovery mode?
yes
droidinterest said:
have you try enter to recovery mode?
Click to expand...
Click to collapse
Yes I have stock recovery (e3 recovery). But in my problem there no option,text except a android lying with a red triange. What should I do ? should i try to flash with livesuit ? God bless U :angel:
Tegroid said:
Yes I have stock recovery (e3 recovery). But in my problem there no option,text except a android lying with a red triange. What should I do ? should i try to flash with livesuit ? God bless U :angel:
Click to expand...
Click to collapse
if no option or you just see an android lying , try press home button ( don't hang up) just press. if option isn't shown yet, try press on/off button
Use
Its Necessary That U Should 1st Make A Backup . nd then try rom. if anything goes wrong then just Restore The rom.
If U want to know that u will need USB drivers after flashing Rom then ask the person who know about that rom ....
Doesn't work
droidinterest said:
if no option or you just see an android lying , try press home button ( don't hang up) just press. if option isn't shown yet, try press on/off button
Click to expand...
Click to collapse
Home button didn't work but power on/off button turned off my funbook. I turned on my funbook again the same problem mentioned in this thread --> http://forum.xda-developers.com/showthread.php?t=2583218&highlight=reset+after+every+reboot I have 2 option left (1) goto it's service center for its repair and void my warranty buy saying that this problem is caused by downloading the busybox x software from play store. (2) Flash it with Original Funbook factory Image. Tell me which option should I choose 1 or 2 ??
100% 2nd
They Will Dont Take Money Fpr That Even For Bricking .
I Have try it.
Flash Stock image
i recommend ........
OK
rahulraz said:
They Will Dont Take Money Fpr That Even For Bricking .
I Have try it.
Flash Stock image
i recommend ........
Click to expand...
Click to collapse
Ok I have the stock Funbook factory Image. But my doubt is not that. My device go reset after every reboot so my question is:
Q: During the flashing process the device may boot several times, so will the reset problem interfere between flashing process ?
Q: Interfere by reset problem will not cause any malfunction to my funbook.
MMX FTP
rahulraz said:
They Will Dont Take Money Fpr That Even For Bricking .
I Have try it.
Flash Stock image
i recommend ........
Click to expand...
Click to collapse
I got the stock funbook factory image from official Micromax FTP server. The links are here -->> http://forum.gsmhosting.com/vbb/f811/firmwares-collection-micromax-android-all-flash-file-only-here-mega-thread-1624105/. This is the collection of original stock Micromax ROMs of various micromax mobiles & tablets.
Ok Install that
Tegroid said:
I got the stock funbook factory image from official Micromax FTP server. The links are here -->> http://forum.gsmhosting.com/vbb/f811/firmwares-collection-micromax-android-all-flash-file-only-here-mega-thread-1624105/. This is the collection of original stock Micromax ROMs of various micromax mobiles & tablets.
Click to expand...
Click to collapse
just installed the original stock image and problem will solved
rahulraz said:
just installed the original stock image and problem will solved
Click to expand...
Click to collapse
Ok I'm starting the flashing process using livesuit
Ok Do That
Tegroid said:
Ok I'm starting the flashing process using livesuit
Click to expand...
Click to collapse
Ok Then
Simply Do ThaT If Facing Problem Just Quote Here.
It worked for me. My problem got fixed. Thanks a lot Rahul !!!
after rooting from odin sucessfully i entered in update mode and selected the recovery file from the sdcard after it said done i went to exit and its taking me back to the same menu again and again my data is being shown everything is there but my phone wont get normal ???
please helppp ???
Mention
alibabar1991 said:
after rooting from odin sucessfully i entered in update mode and selected the recovery file from the sdcard after it said done i went to exit and its taking me back to the same menu again and again my data is being shown everything is there but my phone wont get normal ???
please helppp ???
Click to expand...
Click to collapse
Mention what you are exactly trying to do ??
the_pirate_predator said:
Mention what you are exactly trying to do ??
Click to expand...
Click to collapse
sir i was trying to root my phone wanted to upgrade from jelly bean 3.1.2
.... help please
it says
checking environment ...
extracting kernel....
flashing kernel....
deleting temp....
done
press any key to return
then takes me back to sdcard menu
when i exit it reboots and again to that menu
how to get my phone back to normal please help me ???
Solution
alibabar1991 said:
sir i was trying to root my phone wanted to upgrade from jelly bean 3.1.2
Click to expand...
Click to collapse
please make sure you read everything carefully... especially since all of links to root the phone is listed in the first post where it says directions to root in the gray box with a link to another forum on rooting e160 s/k/l.
Here is the forum on rooting the e160 s/k/l: http://forum.xda-developers.com/showthread.php?t=1924535
download odin, your matching _.recovery.tar and _.zip files. http://pspmaster.tistory.com/181
Also JellyBean version is 4.1.2
the_pirate_predator said:
please make sure you read everything carefully... especially since all of links to root the phone is listed in the first post where it says directions to root in the gray box with a link to another forum on rooting e160 s/k/l.
Here is the forum on rooting the e160 s/k/l: http://forum.xda-developers.com/showthread.php?t=1924535
download odin, your matching _.recovery.tar and _.zip files. http://pspmaster.tistory.com/181
Also JellyBean version is 4.1.2
Click to expand...
Click to collapse
i used the same thread sir but this happend ?? what to do ??
Few Questions
alibabar1991 said:
i used the same thread sir but this happend ?? what to do ??
Click to expand...
Click to collapse
Did you connect your phone in download mode when installing from odin?
Have you installed the device drivers correctly?
Did you properly place everything according to the instruction?
the_pirate_predator said:
Did you connect your phone in download mode when installing from odin?
Have you installed the device drivers correctly?
Did you properly place everything according to the instruction?
Click to expand...
Click to collapse
yes sir i connected to it on odin mode
i just entered the rar file in the sdcard and rooted it
placed everything my data is there i can see in the recovery mode but my phone wont get normal its in recovery mode ?
ps can i call you on cell phone im from pakistan ? :/ im really worried ?
Hi Guys,
yesterday i updated my Mega I9200 to the Official 4.4.2 K.K rom
and i found it so great to have this update ... but the only thing bothered me is how to root it !!
i searched alot for away until i found this way that I ALREADY TESTED for mine and
it worked well :victory:
1st : I'M NOT RESPONSIBLE FOR ANY FAILURE / SABOTAGING YOUR DEVICE
as i said before it worked well for me and i just want to share it
for the fellows who have this beautiful device .
2nd : How to Root :
1- charge your device to a good limit ex. over 80% .
2- Take a backup for important stuff (apps-contacts-messages- etc. ) "Just in Case " .
3- Install philz_touch_CWM Recovery :
Download and start Odin 3.07
Download philz_touch_6.25.0-melius3gxx.tar.md5
Add .md5 file to PDA in Odin & Make sure that only F.Reset Time and Auto Reboot are ticked
Now you need to turn off your smartphone and put it into “Download Mode”
To do so, fist make sure that your device is completely turned off & press and hold Volume Down + Home + Power keys
Now using the original USB cable, connect it to PC & If phone is connected correctly, the colour or ID:COM box will change as well
Now just click on the start button
4- by now you have the philz Recovery on your device .
5- after that there is 2 Ways to root you device ( i did the 1st one & worked well )
1st Way :
boot into philz_touch Recovery by turn off your device Press and hold Volume Up + Home + Power buttons
open "philz settings " in recovery and choose " Re-Root the system "
reboot the device normally into the rom
after the device boot up install " superSU " app
and hence you have ROOTED your device
2nd Way :
same as 1st way but instead of open " philz settings " , you choose to install zip from SD Card
choose SuperSU v1.99 zip , that you already downloaded to sd card .
after flashing it , reboot normally and install " super SU " app
and hence you have root
Downloaded Files :
philz_touch_6.25.0-melius3gxx.tar.md5 http://filerio.in/av9q567dc3fr
UPDATE-SuperSU-v1.99.zip http://filerio.in/vmqa4fbzszua
Odin3_v3.07.rar http://filerio.in/rfsww8dayjuz
Hope this was helpful to all of you Guys .
P.S : the forum moderators are welcomed to move the topic to right sector if it's not right .
help
its not work very will i cannot write in the sdcard or system file ?
mutasimmh said:
its not work very will i cannot write in the sdcard or system file ?
Click to expand...
Click to collapse
i don't know is this happened before or after trying this but
a general case of sd card read/write issue after kk update
use this app to fix : https://play.google.com/store/apps/details?id=nextapp.sdfix
but you must root your phone 1st then use this app as it needs root .
Hi Hatem,
it did not work for me, i'm still on 4.2.2 & Knox was installed recently!
i followed the steps but no root or change in the recovery menu whatsoever
any advise would be great
Thanks for the effort anyways
it worked following this guide
http://forum.xda-developers.com/showthread.php?t=2574953
So this is possible even when the KitKat ROM has Knox on it? I'm just curious because I am dying to root my phone.
Sent from my GT-I9200 using Tapatalk
And is this compatible with the i9200 with KK? I'm not sure if this will trip the Knox counter again.
Sent from my GT-I9200 using Tapatalk
Lol u gon' reply?
Sent from my GT-I9200 using Tapatalk
ianneo said:
So this is possible even when the KitKat ROM has Knox on it? I'm just curious because I am dying to root my phone.
Sent from my GT-I9200 using Tapatalk
Click to expand...
Click to collapse
There is NOT KK without KNOX for GT-I9200
ianneo said:
And is this compatible with the i9200 with KK? I'm not sure if this will trip the Knox counter again.
Sent from my GT-I9200 using Tapatalk
Click to expand...
Click to collapse
Look fot thread title
ianneo said:
Lol u gon' reply?
Sent from my GT-I9200 using Tapatalk
Click to expand...
Click to collapse
I thing that is enough as reply
first method works for me.
but i didnt want to leave supersu a standard user app,, i wanted it a system app.
so
i used the second method. i can confirm that its working too
GT-I9200 Here
thanks
I can't... boot into philz_touch Recovery and open "philz settings " in recovery... Don't know what I'm doing wrong...
thank you for the tutorial.... it really helps...
Question
Will this work with the SCH-R960 the us cellular version of the mega?? I am on 4.4.2 it was updated out of the box.. Thanks
vipfreak said:
I can't... boot into philz_touch Recovery and open "philz settings " in recovery... Don't know what I'm doing wrong...
Click to expand...
Click to collapse
When you flash the recovery make sure that you untick auto-reboot option in odin then flash the recovery. When it is done manually reboot the phone by holding the power button for a while and then hold the volume up and home button as soon as it starts to boot.
Super_Sport said:
first method works for me.
but i didnt want to leave supersu a standard user app,, i wanted it a system app.
so
i used the second method. i can confirm that its working too
GT-I9200 Here
thanks
Click to expand...
Click to collapse
What is your baseband?
Mega MetroPCS
Can anyone confirm if it works on MetroPCS Version (SGH-M819N)?
samsung i527
i have a question. Is the samsung i527 compatible to which model i9205 or i9200 ? Everything is geared toward the 9200 or 9205 for downloading programs. Thanks in advance. Bigdave 1953
Would someone be willing to do a YouTube vid on the steps to rooting the mega and for which carriers this program will work towards root. Thank you in advance. I can root HTC phones all day but have yet to have the backbone to attempt it on the Mega. Thank you in advance.
done with me too, the second method. My I9200 with Vietnamese rom.
Thanks
Thanks..
finally i found something working , damn i'v been digging for days to get a way to root my device , u gave me the solution man , thank u .
Hello guys...!
Recently I've successfully rooted Samsung Galaxy J5 using CF-Auto-Root-e53g-e53gxx-sme500h.zip (Root files of Galaxy E5)
So I'm sharing this to Galaxy J5 users
My phone build number- LMY48B.J500FXXU1AOFA
Warning : I'm not responsible for your device if bricked.. do it on your own risk.
Requirements: Your phone should be charged at least 40-50%
Make sure that the OEM unlock option in Developer option is enabled otherwise it will prevent flashing process.
Step 1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer then Skip this Step.
Step 2: Download and extract the root files on your computer. https://download.chainfire.eu/718/CF-Root1/CF-Auto-Root-e53g-e53gxx-sme500h.zip?retrieve_file=1
Step 3: Now, Switch off your Smartphone.
Step 4: After switching-off the phone, you need to boot into Download Mode. To boot into download mode Press and hold Volume Down, Home and Power button at same time for 5-8 seconds until download mode is active.
Step 5: In the Download mode you will be able to see a Warning Yellow Triangle Sign. In this situation you have to press the Volume Up key to continue.
Step 6: Now, Open Odin3 (found in the extracted files, that you have downloaded in the Step#2) on your computer. Then connect your Smartphone to the computer.
Step 7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show “Added” message at the lower-left panel.
Step 8: Once your device is detected by Odin, click on the PDA button and select the CF-Auto-Root.tar file (you have downloaded this file in step#2).
Step 9: Now, click on the Start button in Odin to begin the Flashing.
Step 10: Flashing usually takes 30-50 seconds to complete the rooting process on your Samsung Galaxy J5 .Once Rooting process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process Smartphone will re-boot automatically.
Step 11: Once you see, the Pass message in Odin, you can disconnect your Device from the computer.
Step 12: Now, to make sure you have successfully rooted your Samsung galaxy J5,open Applications Menu on your Smartphone and Find SuperSU App. If this app exist on your Smartphone then it means you have successfully rooted your device. Congratulations.
Optional: You can also verify that your device is successfully rooted or not by Root Checker Application.
Hit Thanks cuz i don't have any
Would rooting by this method affect knox ? I want to keep my warranty intact.
jonny789 said:
Would rooting by this method affect knox ? I want to keep my warranty intact.
Click to expand...
Click to collapse
Yes it will. Knox will detect changes in Rom and will not be activated.
So, You have lost your warranty ?
If you flashed original stock rom again, you would get warranty back .
Am I correct ?
jonny789 said:
So, You have lost your warranty ?
If you flashed original stock rom again, you would get warranty back .
Am I correct ?
Click to expand...
Click to collapse
Yes I've lost my warranty.. that doesn't matter..
I've seen a thread where they have successfully restored device (galaxy S5) to its official state.. check it out
http://forum.xda-developers.com/galaxy-s5/help/unroot-rooted-towelroot-sm-g900f-t2804788
Hope it'll work for you too!
Storage issue
guys anyone check device storage ??? out of 8 gb, system memory 3.35 gb and misc. files 1.5 gb ??
arisamanta said:
guys anyone check device storage ??? out of 8 gb, system memory 3.35 gb and misc. files 1.5 gb ??
Click to expand...
Click to collapse
No I see system space 3.35 gb and misc. Files 628 mb only
Just tried this method on my galaxy J5 and failed. Double checking to see if i did something wrong
Not working for me.
SM-J500F 5.1.1 Souter east europe
Flashed, phone reboots and nothing, no root.
Hiii
My Samsung J500f is not rooting in cf-auto root by odin ....
So tell me other root process
arisamanta said:
guys anyone check device storage ??? out of 8 gb, system memory 3.35 gb and misc. files 1.5 gb ??
Click to expand...
Click to collapse
Clean your junk files. That will help you get rid of the misc. files that mostly include caches, backups of apps etc.
[email protected] said:
Hiii
My Samsung J500f is not rooting in cf-auto root by odin ....
So tell me other root process
Click to expand...
Click to collapse
Are you runnung lollipop 5.1.1 or marshmallow 6.0.1?
---------- Post added at 11:20 AM ---------- Previous post was at 10:24 AM ----------
I suggest to root it with TWRP made by Nick Verse for 5.1.1 lollipop and TWRP made by Ganesh Varma for 6.0.1. Besides rooting your phone TWRP is going to be usefull for you in the future like partitioning your sd card or flashing some patches, even at flashing custom roms, kernels etc.
Hey, im having a problem and im hoping someone can give me advice.
I wanted to root the j500fn with android 6.0.1. in a similar way but there seems to be no according autoroot file (.md5) on the internet. There is one for this type of phone but only for previous android versions.
I tried some apps to root without a pc but they dont support it either. So is there something else i can try or should i just wait and hope they release one in the future ?
Goldenfold said:
Hey, im having a problem and im hoping someone can give me advice.
I wanted to root the j500fn with android 6.0.1. in a similar way but there seems to be no according autoroot file (.md5) on the internet. There is one for this type of phone but only for previous android versions.
I tried some apps to root without a pc but they dont support it either. So is there something else i can try or should i just wait and hope they release one in the future ?
Click to expand...
Click to collapse
You could just search a bit more it's all over there man. Also if you look at the comment upon yours I already suggested the rooting way. Do it with twrp recovery by ganesh varma.
Sent from my SM-J500FN using XDA Labs
No it isnt ' all over there' and has it ever occured to you that for people with no experience at all this is like a maze?
Anyway thanks for your helpful comments.
Same problem..not working on j 500 f...
jevtabg said:
Not working for me.
SM-J500F 5.1.1 Souter east europe
Flashed, phone reboots and nothing, no root.
Click to expand...
Click to collapse
something new??i just need root on my J 5 sm -500 F..space is the problem,as you all know!!
sofel said:
something new??i just need root on my J 5 sm -500 F..space is the problem,as you all know!!
Click to expand...
Click to collapse
Flash this with Odin
https://forum.xda-developers.com/ga...ial-twrp-3-1-x-galaxy-sm-j500h-t3588533/page1
And then use it to flash SuperSU, magisk or whatever you want..?
I have no PDA button on odin.
I have BL, AP , CP, CSC and UMS.
root succed , now i have to choose a ROM to install but there are more than 10 ROMS available , can someone guide me or help which one to try ? Cant try them all thats for sure so if any of you tried a few please help me ,,,
thanks a lot
vasilis_ said:
root succed , now i have to choose a ROM to install but there are more than 10 ROMS available , can someone guide me or help which one to try ? Cant try them all thats for sure so if any of you tried a few please help me ,,,
thanks a lot
Click to expand...
Click to collapse
Lineage OS 14.1 by Vince or dyneteve is worth to try
Delete this thread please
Thank U Bro.....
darkdipu said:
Thank U Bro.....
Click to expand...
Click to collapse
You're welcome
iam.mash said:
This is for those people who face brick after boot logo change fail
How to use
1.Open odin
2.place this on BL tab
And flash
Hope that it will work for J700H USER
thank you.
https://drive.google.com/file/d/0B-U6ByQzc2qKTVo5UFNCejZnY28/view?usp=drivesdk
Click to expand...
Click to collapse
Will ti make me get back to lollipop ?
Don Shehab said:
Will ti make me get back to lollipop ?
Click to expand...
Click to collapse
Nope it will make you boot up.
If you want to get back to lolipop after you able to bootup you need to follow the step which you will find in youtube or xda forms how to go back to lolipop.
iam.mash said:
Nope it will make you boot up.
If you want to get back to lolipop after you able to bootup you need to follow the step which you will find in youtube or xda forms how to go back to lolipop.
Click to expand...
Click to collapse
My bootloader is locked i can't getback to lollipop unless unlocked the bootloader but idon't know how
Don Shehab said:
My bootloader is locked i can't getback to lollipop unless unlocked the bootloader but idon't know how
Click to expand...
Click to collapse
Which variant you have??
iam.mash said:
Which variant you have??
Click to expand...
Click to collapse
J700h
Don Shehab said:
J700h
Click to expand...
Click to collapse
Than use this bootloader inshallah your hand set will be alright and also hope that you can go back to lolipop.
am currently using lolipop version.Because its smother and give me batter battery backup.
iam.mash said:
Than use this bootloader inshallah your hand set will be alright and also hope that you can go back to lolipop.
Click to expand...
Click to collapse
My phone is working perfectly fine but the only problem that i can't get back to lollipop
Don Shehab said:
My phone is working perfectly fine but the only problem that i can't get back to lollipop
Click to expand...
Click to collapse
First flash lolipop firmware
With odin untick autorebot
When its flashed directly open youre battery
And turn on but dont let your device boot up then again turn on with vol up + power + home which take you to recovery then wipe data and reset factory
Then rebot and you will get successfully lolipop version.
Hope it will work its worked for me and am using it.
iam.mash said:
First flash lolipop firmware
With odin untick autorebot
When its flashed directly open youre battery
And turn on but dont let your device boot up then again turn on with vol up + power + home which take you to recovery then wipe data and reset factory
Then rebot and you will get successfully lolipop version.
Hope it will work its worked for me and am using it.
Click to expand...
Click to collapse
Hey bud, Ive got a J700T, am in serious need of the most recent BL for TMobile (AQF1). Any ideas where to get it? Dealing with what I suspect is a minor mismatch issue that is failing Googles SafetyNet API despite being totally stock now.
If you're wondering - I reflashed the existing AQF1 HOME file from sammobile to unroot, buuut then discovered the HOME file had everything but the BL. So I figure theres a remnant change left in mine thats flagging Googles API.( Lucky I didnt attempt changing versions or i'd be bricked and ticked.)