I just picked up a certified Quickcharge 2.0 from puregear (Very nice charger). Problem is it still only pulls 1.25 amps an 6v (I charged it at 70%). Will it pull more at a lower percentage? Such as a full drain?
How did you meassure that ?
and
How long does it take to charge from 0% to 100 % ?
Haldi4803 said:
How did you meassure that ?
and
How long does it take to charge from 0% to 100 % ?
Click to expand...
Click to collapse
Used an Abovetec USB power meter. Took readings over 3 different high speed cords and both USB an Mag Charger. I don't have a zero to 100 time yet. I'm actually doing that today. I have got a periods of 1% increases in under 45 seconds.
Is it an in-line meter? The meter may be preventing the quick charge. Quick charge uses higher voltages (9v, 12v)
se1000 said:
Is it an in-line meter? The meter may be preventing the quick charge. Quick charge uses higher voltages (9v, 12v)
Click to expand...
Click to collapse
This is the one I'm using. I'm not sure.
http://www.amazon.com/AboveTEK®-Vol..._sim_hi_5?ie=UTF8&refRID=0QDR2CCP4J092439J83V
The Driv3r said:
This is the one I'm using. I'm not sure.
http://www.amazon.com/AboveTEK®-Vol..._sim_hi_5?ie=UTF8&refRID=0QDR2CCP4J092439J83V
Click to expand...
Click to collapse
Yeah quick charge 2.0 uses 9v so outside of what that meter is capable. Not sure how it would affect it though.
se1000 said:
Yeah quick charge 2.0 uses 9v so outside of what that meter is capable. Not sure how it would affect it though.
Click to expand...
Click to collapse
Yea, it definitely limits it. When I ran the stock charger on the mag port vs my Z2 tablet with the Puregear QC it was no contest. My tablet charged faster than the phone. It's strange though, I've noticed two things.
1. The Mag port only works with certain USB's when paired with the QC.
2. The charging is progressive. The charge isn't instant, walk away an give it 4-5 mins an then it begins to seriously charge fast.
My Current setup.
QC 2.0 ~ http://www.pure-gear.com/shop-by-category/power/extreme-usb-wall-charger.html
NOTE: THIS DOES NOT WORK WITH THE STOCK MAGNETIC CHARGER
USB ~ http://www.amazon.com/gp/product/B0..._m=ATVPDKIKX0DER&pf_rd_r=1NBJYPBZZRRZRVD7JBKC
This one I found does... That said it's doesn't charge "quite as fast" maybe a 5-10% difference. + I like the look an feel of the Pawtec, it's very solid.
http://www.amazon.com/gp/product/B00HAAPREM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
So it can quick charge through the magnetic port?? Your observation about it taking a little while makes sense, I've read that it starts off at the standard 5v 1A, then kicks into the higher voltages if both devices negotiate properly.
se1000 said:
So it can quick charge through the magnetic port?? Your observation about it taking a little while makes sense, I've read that it starts off at the standard 5v 1A, then kicks into the higher voltages if both devices negotiate properly.
Click to expand...
Click to collapse
You can but I don't think it charges as fast. That said I use that setup for night charging, as we all should. I think it's very important to use the mag port when time isn't essential in order to preserve the ports.
Also note, when I ran the puregear with the pawtec from zero (I ran the battery out 100% till death). It would not charge/register? I have no clue why but I suspect it's something with the charger registering something. Anyways as soon I charged it enough to turn it on with the stock charger, I then switched back to the QC and ran perfect.
Btw ~ The puregear and the motorola turbo charger are the same price, free shipping just tax for both. The puregear is super small unlike the turbo charger, it definitely looks cool as hell, especially with the pawtec.
Fantastic, thanks for all the info! I agree, I always use the mag port, I can count in single digits the times that I opened the flaps on my Z2 and my Z3 will be the same.
Related
Hi people
Since I'm part of the lucky people owning a Huawei Ascend Mate 7 (MT7-TL10), I'm actually looking some accessories like a quick charger.
I wish a charger better than the original one if possible, with EU pins, and with a good quality checked (I prefer to avoid some product with awesome specs but not tested ...)
So anyone have any idea where I can find a good charger, and without any risk for my phone ?
Thanks
WolwX said:
Hi people
Since I'm part of the lucky people owning a Huawei Ascend Mate 7 (MT7-TL10), I'm actually looking some accessories like a quick charger.
I wish a charger better than the original one if possible, with EU pins, and with a good quality checked (I prefer to avoid some product with awesome specs but not tested ...)
So anyone have any idea where I can find a good charger, and without any risk for my phone ?
Thanks
Click to expand...
Click to collapse
for few days i went to jarir book store on KSA . I found Charger good price also 2 USB 5 volt 2.4 Amber ... compatiable with mate 7 and faster from orignal ...
just to know more fasting to charge wil damge your batter of mate 7 quickly .also orignal 2 A will damge
for me I charging with Iphone charge 1A good for batter and Stander and low risk to Device
If you want proper charging, then always use the accessories coming with that product. It is tested for sure and good. Other than that, you can use any charger delivering the same charge. The original charger is 5 volt, 2 Ampere. Don't use anything above 2 amperes as it may damage the device. Below that will charge it slowly.
BTW, why you don't want to use the original charger?
Sent from my Coolpad 9976A using Tapatalk
I use Nexus 6 Turbo charge (made by Motorola) 5v 1.6A it charge full battery in 90 minute.
http://www.motorola.com/us/accessories/power-storage/chargers/motorola-turbo-charger/motorola-turbo-charger-pdp.html
Is it safe for battery life of Mate 7?
I'm using a NTT Docomo Quickcharge 2.0 adapter and It does support it even though is not specified and it's not a qualcomm chip.
Sent from my HUAWEI MT7-L09 using Tapatalk
djmaxi said:
I'm using a NTT Docomo Quickcharge 2.0 adapter and It does support it even though is not specified and it's not a qualcomm chip.
Sent from my HUAWEI MT7-L09 using Tapatalk
Click to expand...
Click to collapse
Can you test it with ampere (free in gplay) i don't think it will charge over 1800mA so that it acts like a normal 2a charger
Fast charging
Using a fast charger will destroy your battery faster. Not recommended as the battery is not removable. You can get a battery and if you are comfortable removing the back and swapping it out then go for it.
Hi,
PoopDonkey said:
Using a fast charger will destroy your battery faster. Not recommended as the battery is not removable. You can get a battery and if you are comfortable removing the back and swapping it out then go for it.
Click to expand...
Click to collapse
that is not correct as you are not connecting the charger to the battery directly. In fact the charger is just a power supply. The actual charger is integrated into the phone (charging controller).
In general you need to know that volts are pushed to the device by the power supply and amps are drawn by the device (phone) from the power supply. Therefor using a power supply with more than 5V will kill your phone but using one with 2A, 3A or even 4A will make no difference as the charging controller will just pull the amps required. Because of that you can not really fast charge a phone by changing the power supply only if the phone supports the fast charge option (for example some Nexus phones).
I tested this myself with a power supply (can provide 5V and 1.5 to 4 amps) and an amp meter. The phone always drew between 1.5 and 1.6 amps (with and empty battery, 8 to 10% left) regardless of the selected amps of the power supply. Using a power supply with less than 1.5A will kill the power supply as the phone tries to draw the 1.5 amps or more. As result the power supply will get hot and eventually die.
Since battery is not removable be careful with fast charging, since it will decrease the life span of the battery and in the end it will just give you less battery performance.. it is stupid... however.. there is situations where it can be really needed though but not on a regular basis..
Last weekend I would really had needed fast charging.. It forced me to spend about 3 hours on a cafee so I could make it 100% so I did know I did survive the day with gps and all other things.. However in these situations I really like the ultra power saving mode..it saved me that night.. when I was lost in stockholm.. and my phone was really the only way to get contact with people
blackinfinity said:
Since battery is not removable be careful with fast charging, since it will decrease the life span of the battery and in the end it will just give you less battery performance.. it is stupid... however.. there is situations where it can be really needed though but not on a regular basis..
Last weekend I would really had needed fast charging.. It forced me to spend about 3 hours on a cafee so I could make it 100% so I did know I did survive the day with gps and all other things.. However in these situations I really like the ultra power saving mode..it saved me that night.. when I was lost in stockholm.. and my phone was really the only way to get contact with people
Click to expand...
Click to collapse
Why don't you buy a powerbank? I can advice you the xiaomi 16000mah. That one charges fast and you can be mobile.
Any recommendations?
I wonder if a S6 charger do the trick. Stock charger is too slow damn. Spending 3 hours to have a full charge is not acceptable for me.
I'm going to be honest, it doesn't really matter how you charge your phone as long as you don't go over 5v and 2 Amps. Batteries will automatically lose cells from charge cycles and by the time you feel the effects of the battery going bad, you would have already moved on to the next device for the next person to worry about. And saying to use the Stock Charger isn't really good enough as the Stock charger doesn't serve as a Car charger also. If you want to charge your phone quick, and you already have a 2 Amp charger, Check your microUSB cable. Don't use junk cables, buy quality or use the cable you received with the device. You get what you pay for. Fast Charging won't work as the Charger has a chip inside that communicates with the Phone and Device. Also, when buying a charger, don't just randomly buy a charger online, Make sure its UL Tested. Even if it says UL tested, there should be a test number on that UL Label, take it a step further and google it and make sure it matches the charger specs and passes as knockoff chargers are notorious for copying other chargers Regulatory icons to make it seem authentic. You don't want to buy a junk charger that ends up burning your house down or gives you a very bad 120 Volt shock through the microUSB cable that would also kill and fry your phone.
treem said:
I use Nexus 6 Turbo charge (made by Motorola) 5v 1.6A it charge full battery in 90 minute.
http://www.motorola.com/us/accessories/power-storage/chargers/motorola-turbo-charger/motorola-turbo-charger-pdp.html
Click to expand...
Click to collapse
1.6A is nothing.. i use 2.0A and it still chrges 3 hours
one friend conected his phone to a hi suite, he went to repair sistem or something like that, and it pop out an option of QUICK CHARGE... even he doesent know how that hapends, now his phone charges faster. he is on b331 rom
cyvr1 said:
Hi,
that is not correct as you are not connecting the charger to the battery directly. In fact the charger is just a power supply. The actual charger is integrated into the phone (charging controller).
In general you need to know that volts are pushed to the device by the power supply and amps are drawn by the device (phone) from the power supply. Therefor using a power supply with more than 5V will kill your phone but using one with 2A, 3A or even 4A will make no difference as the charging controller will just pull the amps required. Because of that you can not really fast charge a phone by changing the power supply only if the phone supports the fast charge option (for example some Nexus phones).
I tested this myself with a power supply (can provide 5V and 1.5 to 4 amps) and an amp meter. The phone always drew between 1.5 and 1.6 amps (with and empty battery, 8 to 10% left) regardless of the selected amps of the power supply. Using a power supply with less than 1.5A will kill the power supply as the phone tries to draw the 1.5 amps or more. As result the power supply will get hot and eventually die.
Click to expand...
Click to collapse
so much misinformation
this post is the only one who gets it right.
Kalemucu said:
Any recommendations?
I wonder if a S6 charger do the trick. Stock charger is too slow damn. Spending 3 hours to have a full charge is not acceptable for me.
Click to expand...
Click to collapse
You have not read my earlier post or you did not understand it. Changing the charger on the Mate 7 will have NO effect (zero, nada) on the time required to charge your phone except the charger delivers less then appr. 1.6A. Then it would take longer and evetually kill the charger. The Mate 7 uses a Kirin chip which has no fastcharge implemented. Samsung uses Qualcomm Chips with implemented fastcharge technology. The charger (in fact a power supply) and the phone/CPU/charge controller need to communicate with each other, otherwise fastcharge will not be activated (the reason fastcharge with charge-only cables does not work because they lack the required data cables for communication).
I'm going to be honest, it doesn't really matter how you charge your phone as long as you don't go over 5v and 2 Amps.
Click to expand...
Click to collapse
Wrong. Correct would be "I'm going to be honest, it doesn't really matter how you charge your phone as long as you don't go over 5v." The amps of the charger don't matter at all -> amps are PULLED by the phone not pushed to the phone. You could use a charger with 100 or 1000 amps and it would not hurt your phone a bit as long as it is only charged with 5 Volts.
More amps (>1.6A) on the charger do not improve the time for charging one second.
1.6A is nothing. i use 2.0A and it still chrges 3 hours.
Click to expand...
Click to collapse
Yes, and that won't change one bit even if you use the best and most expensive charger and a 1000$ cable. The Mate 7 is limited by its hardware (built in charge controller) and pulls max 1.6A. End of story.
As long as you don't understand how charging works you will spend 100's of bucks for cables and chargers to no avail.
The only reason, why charging with some charges is quicker than with others is that those chargers actually deliver the amps they are supposed to deliver. There are a lot of cheap/bad chargers out there which are labelled with 5V/2A but only deliver a fraction of the amps. You can identify those chargers easily because they get extremly hot. I use a 2A charger from Aukey which gets only lukeworm.
I know there is a thread about what charger to buy, but I have a specs question. Mine z5 came with the International charger and I am in the US. I noted it is 5v and 1.5a. I have a 5v 1a charger on hand. Can I use that?
Sure, it will just take longer to charge.
No lasting negative effects on the battery?
BigHulkDiesel said:
No lasting negative effects on the battery?
Click to expand...
Click to collapse
Most certainly no negative effects. In theory it should actually be better for the battery to charge it with less current, but I don't know if that is true.
Different topic: I read that there are multiple versions of the Z5 (US, Europe, ...) and that they support different LTE frequencies. So maybe you want to check if your mobile connection works as intended, if you don't have the US version.
My phone is showing LTE after choosing my apn settings.
I tried using a 5V 1A charger with my phone and it doesnt seem to work. (It works fine on my old phone) The charge light keeps turning on and off. The vibration pulse you hear when it starts charging keeps pulsing too.
Better use an HIGHER amperage, than lower!! Charger will adapte it to phone specifics...A lower amperage will reduce your battery capacity in long time.
I once connected my Z5C to an old 500mA charger (caught the wrong cable) and kept using it a bit (screen on, etc.) and it gave me a nag screen that said that the charger is not suitable because apparently the battery drain from usage was more than what trickled back in.
However, if left alone even a 500mA charger should eventually charge the phone, taking much longer though.
Generally, with chargers, you need to get the voltage right. If the Amperage is higher that what the OEM charger is it does not matter. The electronics in the device limit the charge to what the device can handle. The Amperage on the charger is the max it can deliver. In other words, the charger does not pump 2.5A into the phone forcefully, the phone just nibbles whatever it can take (say 1,5A).
farfetch said:
Better use an HIGHER amperage, than lower!! Charger will adapte it to phone specifics...A lower amperage will reduce your battery capacity in long time.
Click to expand...
Click to collapse
Any reliable source for that? The charging will be slower - yes, but I seriously doubt, that this has negative long-term effects on the capacity.
dd23 said:
Any reliable source for that? The charging will be slower - yes, but I seriously doubt, that this has negative long-term effects on the capacity.
Click to expand...
Click to collapse
Just try it by yourself for few days
Sent from my E5823 using Tapatalk
I think you need a 2A charger to be sure with the Z5c. Most of my older chargers take hours to charge it, and the car USB port (Nissan Qashqai 2015) barely charges it at all.
The UCH20 that came with the phone, takes 2 hours 15 mins to charge the phone fully. I got a quick charger which takes around 1 hour and 10 mins at max
Wow, really?
It is basic electronics. The voltage must be the exact one. Amperage is what the device draws , therefore the charger must be capable to provide a minimum not a maximum.
I repeat, it is basic electronics!
Now a more pertinent question :
What are the voltages for quick charge ? Does anyone know?
If someone has a original charger with quick charge can you please state what voltages are written on it?
Should be 2 or 3 voltages with lowest 5V
Edit : Found myself the info on Sony UK website of a Sony charger.
[email protected],
[email protected],
[email protected]
farfetch said:
Better use an HIGHER amperage, than lower!! Charger will adapte it to phone specifics...A lower amperage will reduce your battery capacity in long time.
Click to expand...
Click to collapse
I also want a source for that... It's the first time in my life i hear it's the opposite... and i have been charging this phone with 1 amp or 500mA (with pc usb) for the past 4 years, battery is still fine. Only used a 1.5A charger a few times.
On the other hand, my sisters z5 had a swollen battery a year ago, she always used quick chargers...
farfetch said:
Just try it by yourself for few days
Click to expand...
Click to collapse
What do you mean by that?
you are not going to notice battery degradation in just a few days of charging...
EDIT: i only notice now that i accidentally replied to a post from years ago, sorry for that...
To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the LG G6 can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
I have used the charger that came with it (since it was the only USB-C cable I had at the time) and it charged amazingly fast. I bought a Wireless charger as well which is also amazingly fast. It's my first wireless charging experience and I was told it trickle charges so it would be much slower than charging from the cable, but I barely notice a difference in speed at all. I keep checking the phone what seems like every couple of minutes if not seconds and the % has increased by a lot more than I would have imagined. I thought wireless charging to be pointless and a who-cares ordeal, but not that I have experienced it... I don't think I will go back to a device without it (not for a phone at least). I'm not sure if any health issues can be there from radiation, but I'm almost dead anyway (well... I have about 50 years to go I guess) so I don't really care, lol.
For those wondering, I went with the CHOETECH Qi Model T513 wireless charger. Input: DC5V/2A (Max) Output: 7.5W which I purchased from Amazon for only $19.95. That was 50% off at the time I purchased it, but that was only a few days ago so you might want to check on it.
Really? I feel my g6 charges way slower then my S7 edge. I still have it but I'm gonna test this tomorrow.
---------- Post added at 09:45 AM ---------- Previous post was at 09:45 AM ----------
chinchillables said:
I have used the charger that came with it (since it was the only USB-C cable I had at the time) and it charged amazingly fast. I bought a Wireless charger as well which is also amazingly fast. It's my first wireless charging experience and I was told it trickle charges so it would be much slower than charging from the cable, but I barely notice a difference in speed at all. I keep checking the phone what seems like every couple of minutes if not seconds and the % has increased by a lot more than I would have imagined. I thought wireless charging to be pointless and a who-cares ordeal, but not that I have experienced it... I don't think I will go back to a device without it (not for a phone at least). I'm not sure if any health issues can be there from radiation, but I'm almost dead anyway (well... I have about 50 years to go I guess) so I don't really care, lol.
For those wondering, I went with the CHOETECH Qi Model T513 wireless charger. Input: DC5V/2A (Max) Output: 7.5W which I purchased from Amazon for only $19.95. That was 50% off at the time I purchased it, but that was only a few days ago so you might want to check on it.
Click to expand...
Click to collapse
Really? I feel my g6 charges way slower then my S7 edge. I still have it but I'm gonna test this tomorrow.
Went and picked up this bad boy today. LS variant. Out of the box, had 41%. Using my car charger Qualcomm Quick Charge 2.0(yes 2.0) and the included USB C, it charged to 70% in the 20 minute drive back to my house. For using the old QC tech, still charged amazingly fast. I have a QC3.0 39W wall charger that got delivered this afternoon. Will wait til this baby dies and charge her up with that and will report back.
Ive noticed when using a QC 3.0 charger and cable doesnt seem like the g6 is actually charging faster. Its suppose to support QC but its not.
I'm finding this charges a lot slower than my S7 Edge as well. Using the provided cable and charger it takes about 2.5 hours to go from 5% to full which is generally fine, but there isn't a burst and then trickle. I appreciated being able to plug my phone in for a short time when it was low and top it up enough to go out and not worry about it dying. Can't really do that with this one.
I had a power brick laying around and says qualcomm 2.0 and it charge`s really fast, like 1% of battery every min. , but yes with the stock charger brick takes forever to charge.
Using a Xiaomi USB C charger (45W) which supports both UPD 2.0 and QC 3.0, my phone charged very fast.
Mine charges super fast with the supplied charger. I plugged in with 11% yesterday and hit 50% in like 25 minutes.
quick charging is convenient and all, but is there a way to revert to normal charging? I don't want to accelerate my cycles. Thanks.
Sent from my LG-H870DS using Tapatalk
tagacapiz said:
quick charging is convenient and all, but is there a way to revert to normal charging? I don't want to accelerate my cycles. Thanks.
Sent from my LG-H870DS using Tapatalk
Click to expand...
Click to collapse
Use a non-QC charger.
thanks. I'll do that, I have to get extra cables anyway. Although I was wondering if there was a way to hack it phone-wise.
Sent from my LG-H870DS using Tapatalk
sharoon01 said:
I'm finding this charges a lot slower than my S7 Edge as well. Using the provided cable and charger it takes about 2.5 hours to go from 5% to full which is generally fine, but there isn't a burst and then trickle. I appreciated being able to plug my phone in for a short time when it was low and top it up enough to go out and not worry about it dying. Can't really do that with this one.
Click to expand...
Click to collapse
the charger that comes with the device doesn't support QC3, it's a QC2 charger.
so, getting a QC3 charger would defiantly decrease the charging time :good:
abdullahziad said:
the charger that comes with the device doesn't support QC3, it's a QC2 charger.
so, getting a QC3 charger would defiantly decrease the charging time :good:
Click to expand...
Click to collapse
I'm pretty sure the supplies charger is QC3.
vintagerock said:
I'm pretty sure the supplies charger is QC3.
Click to expand...
Click to collapse
Silly question - is there an easy way to tell if a charger is QC2 or QC3?
sharoon01 said:
Silly question - is there an easy way to tell if a charger is QC2 or QC3?
Click to expand...
Click to collapse
Look to the charger specification, if it supports only 5v and 9v then is QC2. QC3 scales on various voltage between 5 and 12 volts.
And yes, the provided charger is QC2, probably the same Found with the G5.
Yeah I take back what I said. The supplied charger does appear to "only" be QC 3. It still seems faster then QC2 though. Maybe it's just in my head. It works for my needs though, I can get almost 50% in like 20.
Charge in airplane mode when you can. When you have no worries of anyone calling or texting. With wifi off as well you'll see a decent jump in fast charging.
purchased by phone a couple of days back and it charged from 5% to 100% in approx 1.40 mins with the stock QC 2.0. I'm damn impressed....
Let me Ask y'all something. Coming from a LG G4 and just Charging My Batteries by a OEM Battery Charger I got 2HRs More of SOT. When I charge via the USB Quick Charger I got the same 3HRs as usual. So I got 5 while charging Slower then the SO-Called Quick Charging. To my understanding Batteries are meant to Slow-Charge rather then Fast
To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the Essential Phone can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
They claim that a 5 mins charge gets you 5 hours of battery. 1 hour and 30 minutes for a complete charge.
Sent from my Pixel using XDA-Developers Legacy app
Apperently its like 30 something Watts. Unbox Therapy found this on the charger.
27W to be exact. And on another video review, it showed 5v @ 3A and 9v @ 3A on the charger. So this thing should charge pretty quick and I assume is just using the native USB-C Fast Charge capability which is just fine.
I got confirmation from support that it is using USB-C PD for charging. No QuickCharge.
So this is all false then...
http://www.theandroidsoul.com/essential-phone-fast-charging/
LastQuark said:
So this is all false then...
http://www.theandroidsoul.com/essential-phone-fast-charging/
Click to expand...
Click to collapse
Yup, that would be a lie. Just because you have a 835, they would have to still implement QC themselves in order to leverage it.
And I believe Qualcomm loves to charge a pretty penny to flip that bit on for your device.
The device may still charge pretty quickly, but we will need some reports from those who have it in hand.
Anyone with it already have AccuBattery installed and see what the charging speed is plugged into its charger?
uncled1023 said:
I got confirmation from support that it is using USB-C PD for charging. No QuickCharge.
Click to expand...
Click to collapse
From a review I watched, they said that the charger is capable of Charing 5 hours of usage time in 5 minutes.
I tried my s8 charger on it, the charger quickly heated up and stopped charging the device
When using the S8 charger, it show slow charging... Sucks
Soooo... What's wrong with using the included charger?
And Samsung uses some other form of Fast Charging that's proprietary to their own devices. It isn't Qualcomm quick charge at least at the generic level. Essential just uses the USB-C 3A fast charge ability which you will have to get separate from both Samsung or QC2/3.0 stuff which is a bit of a pain, but really not surprising. Same as the Nexus/Pixel devices.
It shows Charging Slowly with my Anker PowerPort 10 charger for some reason - even though it is 60W capable and nothing else was plugged into it. I'm really hoping I don't actually have to use the bundled charger just to get it to charge quickly. That would actually be really annoying. I rarely use included chargers since I have Anker PowerPorts everywhere that I need to charge.
I plugged in an Ailey quick charge charger. It first said charging slowly then changed to charging rapidly.
Sent from my PH-1 using Tapatalk
ack154 said:
It shows Charging Slowly with my Anker PowerPort 10 charger for some reason - even though it is 60W capable and nothing else was plugged into it. I'm really hoping I don't actually have to use the bundled charger just to get it to charge quickly. That would actually be really annoying. I rarely use included chargers since I have Anker PowerPorts everywhere that I need to charge.
Click to expand...
Click to collapse
That's because it will never fast charge a USB-C Fast Charge device. You need something like this since this device does not have Qualcomm quick charge.
That 60W charger doesn't really support any modern Quick Charge, it just supports the max 2.4A charging for things like Tablets and whatnot.
For those using Quick Charge to the PH-1, it is only compatible with QC 4.0 and not QC 3.0 or below. QC 4.0 is compatible with Power Delivery (PD) that PH-1 uses.
27W USB Charger
Just got mine today... It says 27W...
LazerL0rd said:
Apperently its like 30 something Watts. Unbox Therapy found this on the charger.
Click to expand...
Click to collapse
Franksr said:
Just got mine today... It says 27W...
Click to expand...
Click to collapse
Yeah.. that should be average.
IM0001 said:
That's because it will never fast charge a USB-C Fast Charge device. You need something like this since this device does not have Qualcomm quick charge.
That 60W charger doesn't really support any modern Quick Charge, it just supports the max 2.4A charging for things like Tablets and whatnot.
Click to expand...
Click to collapse
Quick charge or no quick charge, I'm pretty sure it's supposed to charge faster than 3% overnight. It still said charging slowly when I got up this morning and said 5 days until full. It had actually only gone up 3% in the past 9 hours.
My battery is at 96% so it may not be the most accurate test, and it was over 1000mah on initial plug in and then slowly went down to what's on the screen shot after about a minute.
I now have a couple Qualcomm 3.0 fast chargers, the fast charger from my LG G5, and the One plus fast charger. Only the One plus charger indicates that the 6T is quick charging. My question is if the other fast chargers are still faster to charge this phone than a standard charger.
Thanks
marcmarshall said:
I now have a couple Qualcomm 3.0 fast chargers, the fast charger from my LG G5, and the One plus fast charger. Only the One plus charger indicates that the 6T is quick charging. My question is if the other fast chargers are still faster to charge this phone than a standard charger.
Thanks
Click to expand...
Click to collapse
No, you need to use DASH Charger to have fast charging
polzovotel said:
No, you need to use DASH Charger to have fast charging
Click to expand...
Click to collapse
Thanks
This link explains it well: https://m.androidcentral.com/dash-charge
They will charge faster than an old .5 amp you may have kicking around in a drawer. Realistically they will charge fast enough because how often do you need every drop you can get as quickly as possible? On the occasions you do need that you just take it to the dash charger and all is good. It's not just me saying that, there was a thread on a previous OnePlus device where someone else said what I just did and the agreement was unanimous. I couldn't argue it myself, I had found just the same to be true; I was typically in no hurry to charge the device and when I was I just made a point of going to the dash charger. I'm not sure what your use case is but if it was to go all dash all the time you may want to consider waiting a little and seeing how it plays out in use. I think you'll find your ok with just the one that came in the box or getting a second for the office or cart and calling it a day.
Someone not only do you need the charger you need the cable to? That wasn't explained in the article. Can you clarify?
marcmarshall said:
This link explains it well: https://m.androidcentral.com/dash-charge
Click to expand...
Click to collapse
Sent from my ONEPLUS A6013 using Tapatalk
biggiestuff said:
Someone not only do you need the charger you need the cable to? That wasn't explained in the article. Can you clarify?
Click to expand...
Click to collapse
You will need both the official OnePlus cable and wall wort to get the full charging speed.
Are the chargers and cables for the Oneplus 5 and 6 the same as the 6T?
marcmarshall said:
Are the chargers and cables for the Oneplus 5 and 6 the same as the 6T?
Click to expand...
Click to collapse
Yep, they’ve been using the same charger since the 3.
https://forum.xda-developers.com/oneplus-6/accessories/ordinary-usb-cables-support-dash-t3838411
This post describes how the OPPO charger works with some Amazon cables to give the full 4A charge on a OP6. I've ordered the cables linked in the first post and an OPPO VOOC charger to try out, and keep for a spare / work setup for my 6T once it gets here today.
Where does it say if it's Dash Charging on the phone? With my Note 9 I can see if it's quick charging or not, depending on charger.
roaduardo said:
Where does it say if it's Dash Charging on the phone? With my Note 9 I can see if it's quick charging or not, depending on charger.
Click to expand...
Click to collapse
You're probably not going to see the term "Dash Charge" anywhere,since OnePlus stopped using the phrase.
Whether they replaced it w/something else to indicate fast charging is anyone's guess (if there was any indication of Dash (fast) charging on previous OnePlus devices).
KOLIOSIS said:
You're probably not going to see the term "Dash Charge" anywhere,since OnePlus stopped using the phrase.
Whether they replaced it w/something else to indicate fast charging is anyone's guess (if there was any indication of Dash (fast) charging on previous OnePlus devices).
Click to expand...
Click to collapse
Oh, true. I forgot about the EU legal stuff.
KOLIOSIS said:
You're probably not going to see the term "Dash Charge" anywhere,since OnePlus stopped using the phrase.
Whether they replaced it w/something else to indicate fast charging is anyone's guess (if there was any indication of Dash (fast) charging on previous OnePlus devices).
Click to expand...
Click to collapse
You will see a lightning bolt in place for the battery icon when Dash Charging is active, and if you plug in the Dash charger while on the lock screen, it will also make a short blip noise with an animated lightning bolt. Standard chargers and/or cables will show the lightning bolt inside the battery icon. You can always look at the charger current using the *#808# menu though.
Wait does the cable really matters? from the article linked, looks like the tech is only in the adapter
It matters because if you don't use one designed for it you wont get Dash charging, and yeah, its irritating that we have drawers full of cables that we cant use. As to the question of how you can tell, it says "Rapidly charging" on the lock screen. You'll also notice the phone gets charged stupidly fast, that's a big tell.
Gungrave223 said:
Wait does the cable really matters? from the article linked, looks like the tech is only in the adapter
Click to expand...
Click to collapse
Yes it does. Pushing 4 amps to get more watts requires low resistance cables, otherwise the resistance will limit maximum wattage. With QuickCharge (instead of DASH charge) voltage is raised instead of current, mitigating the resistance problem.
For QuickCharge there also a handshake telling both the phone and charger that both devices support a certain charging standard. Only then current (or voltage) is raised above normal USB levels. Otherwise you would risk destroying devices which are not capable of fast charging.
Bäcker said:
Yes it does. Pushing 4 amps to get more watts requires low resistance cables, otherwise the resistance will limit maximum wattage. With QuickCharge (instead of DASH charge) voltage is raised instead of current, mitigating the resistance problem.
For QuickCharge there also a handshake telling both the phone and charger that both devices support a certain charging standard. Only then current (or voltage) is raised above normal USB levels. Otherwise you would risk destroying devices which are not capable of fast charging.
Click to expand...
Click to collapse
Tragic...I invested a lot into my PD chargers for my 2xl guess I need to update everything again
But do you? How often do you NEED dash charge? You can still use all the other charges, they just won't charge as fast, but that's not a bad thing if you are not in a hurry.
The Dash charger works the fastest, however my Quick Charge 3.0 car and wall chargers are still delivering 2 to 3 times more m to my OneTouch 6T then my Galaxy 8 (Rated for Quick Charge 2.0) ever took, that is using higher end usb-c cables but not the Dash cables.
The Highest I ever saw my s8 take was 1300 mA, this 6T will take 2300 mA from my QC 3.0 car charger and 3200 mA from my QC 3.0 wall charger, as long as the battery is under 70%. However, the Dash charger with Dash cable gets around 4800 mA but it seems to fill the battery at a more rapid pace then what I would expect for that amount of power going into it.
The Dash cables have more pins in them to deliver segmented power, at the proper voltage and amperage, to partitioned batteries simultaneously in the 6T without it causing your phone to heat up.