Q&A for [ROM][E970/E971/E973]LG Official Kitkat 4.4.2[stock]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][E970/E971/E973]LG Official Kitkat 4.4.2[stock]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Music from SD Card
I just flashed the rom on my e970 and everything works including the phone seeing the SD Card but I can't get any music player to read the music that is on the sd card. Any help would be greatly appreciated.
Use sd scanner app from play store, that works fine for me.
Will this support Mod kernels? I think that's what I want to say but I'm not a complete Android geek.... Yet
2g-3g switch problem
I can't switch to WCDMA from gsm. It only receives 2g signals.
When I try to launch mobile networks , it crashes.
I couldn't locate the modem settings in engineering mode either.
i have thesame problem...
Upgrading to CM12 Lollipop
Hi, I'm trying to upgrade to Lollipop from this ROM and at first while flashing the CM12 zip i encountered the error "This zip is intended for gee, geeb" etc. So, I tweaked the updater-script and removed the assert and ran the script which installed the ROM but I'm unable to install the Google Apps. I tried with all gapps packages (minimal, micro, full), but none of them works. Can you please help me out?
Does this have anything to do with build.prop? Even though I flashed the fix to show as ATT e970, the CM12 updater-script identified this device as "geehrc4g"??Also, build.prop has some lines like
ro.com.google.cliendidbase.am=android-kt-kr
ro.com.google.cliendidbase.am=android-kt-kr
Do you know where can I find the exact build.prop for e970 (Kitkat)?
Device: LG - e970
Recovery: TWRP 2.8.3.0
is all good w the e971 and this rom?
Hi, just wondering how everything functions on the e971 with this rom? Flashing roms is new to me and am so bummed to finally receive word from Rogers there will be no official update for this device which is in my opinion unacceptable buying a flagship device and getting only 1 update for it 6 months later when the phone manufacturer has updated it, I'm done with them, anyways some help would be appreciated as I need my phone to function properly, I am on official JB 4.1.2 from Rogers, I have unlocked the device to be used with any carrier, now I am planning on rooting using the zv9-zvb universal root method, i was then planning on unlocking bootloader using freegee and then using freegee to install cwm phils touch and then gonna install this rom, anyways are those the propper steps and if I so will all functions of my e971 work as they should with this rom?
Also if i need to go back will it be as easy as downloading paulicats rogers 4.1.2 zip and using cwm to install it and revert back? Any help would be greatly appreciated and if your ever in my neck a the woods I'll buy ya a beer. Thanks.
Working fine for me
This is my first android device so I was attempting this for the first time, I was on Stock JB. First I Rooted the phone(universal root kit), unlocked its boot loader(app from playstore), was taken to cwm, tried to flash the ROM it didn't work a status 7 error occurred, then I flashed philz recovery, flashed the ROM again and its working fine.
I am new to this android world so this may sound noob but is there a way to backup my apps only so that I don't have to re install them every time I flash a new ROM. (Will be trying a lot of roms from now).
lg optimus g e971
When flashing the kittkat do I need to us cwm and be rooted
how to flash e970 stock ROM!
I tried it by installing zip via cwm recovery but it says error in zip.
Flawless Installation
I just installed this ROM on my LG Optimus G E971 and the entire installation was simple and flawless. Prior to this ROM, I had [ROM][5.1.1] [GEEB] [Mako base] Unofficial CM-12.1 which is a great ROM too, however, I wanted to try something that was based on stock. I have the latest version of CWM for LG Optimus G E971.
This is how I installed the following ROM:
1. Downloaded the ROM onto my phone
2. Booted into CWM recovery
3. Wiped data/factory reset
4. Wiped cache Partition
5. Installed ROM
6. Rebooted
Once I have used this ROM as my daily driver for a while, I will get back and share my opinion and thoughts about it.
I stumbled on to this rom and I must say it is very good. There are only two issues I am having that hopefully someone can help me out with. The first issue is an annoying data network setting prompt that happens when I boot up which tells me that I will incur additional data charges. There is a setting under mobile networks that is checked called "ask when data connected" Whenever I try to uncheck it it reverts back to being checked. The second is under access point names. There are two other apn there that I cannot delete for some reason. Does anyone have any ideas how I can resolve these issues?
how do i flash e973 kk flash to my phone?
first of all, im sorry to bring back an old thread back to life, also for my lack of knowledge,
but id really love to install KK on my e973.
I managed to root my phone using root with restore by Bin4ry, but im lost at the steps forward from that.
Could anyone advise me with the prerequisites, tools and steps?
Thanks
Mobile network not working
The only thing that doesn't work is data/mobile network connection. I can make calls and receive texts, but data doesn't connect. What are some fixes I can try?
Kiplacon said:
The only thing that doesn't work is data/mobile network connection. I can make calls and receive texts, but data doesn't connect. What are some fixes I can try?
Click to expand...
Click to collapse
Try flashing the jellybean modem and see if that fixes the issue.
Kilogrm said:
Try flashing the jellybean modem and see if that fixes the issue.
Click to expand...
Click to collapse
Just straight on top of the rom, or should I do a fresh install?
EDIT: Also are there different versions of the modem? This post only has one: http://forum.xda-developers.com/showthread.php?t=2220048
Kiplacon said:
Just straight on top of the rom, or should I do a fresh install?
EDIT: Also are there different versions of the modem? This post only has one: http://forum.xda-developers.com/showthread.php?t=2220048
Click to expand...
Click to collapse
Yes the one you have linked to. Just reboot into cwm or twrp which ever recovery you have and flash it. Once done reboot.
Kilogrm said:
Yes the one you have linked to. Just reboot into cwm or twrp which ever recovery you have and flash it. Once done reboot.
Click to expand...
Click to collapse
I tried flashing the modem, but it doesn't seem to have any effect. I'm still getting this error (i.imgur.com/Ds2sHYc.png) and everything works the same as before (but at least nothing new is broken).
What APN Settings are you using?
Kilogrm said:
What APN Settings are you using?
Click to expand...
Click to collapse
I'm not really sure what APN is, but after Google-ing it I found this on AT&T's support site (att.com/esupport/article.jsp?sid=KB424489&cv=820#fbid=lMQAN_Ixyrx).
I don't know what it did, but following the instructions fixed the problem
Thanks for the advice
Related
Would like some help. I have flashed CM 11 and can't make calls. It says mobile network not available. Tried flashing AOKP rom as well and same thing. Mobile data works fine, although i have gotten a popup twice that says 'Google Play Services not supported by your device, please contact your manufacturer' (no noticible issues from this, google stuff i've tried so far works). I have included a screenshot so you can see my baseband and rom version, etc.
Now, i had a great deal of trouble getting a rom flashed to start with, CWM put me into a bootloop and TWRP wouldn't flash anything because it said it couldn't mount /storage when i tried. Used Philz advanced CWM (love it btw, will be using it from now on). Still wouldnt flash the hltespr specific CM11 version so had to use the unified hlte version (it gave me the status 7 asserts issue, but editing the asserts out just gave me a bad file error when flashing). I wiped data/cache/dalvik between each flashing. I don't know if any of that would have bearing on this problem, just including any details i can. Any advice?
Verilin said:
Would like some help. I have flashed CM 11 and can't make calls. It says mobile network not available. Tried flashing AOKP rom as well and same thing. Mobile data works fine, although i have gotten a popup twice that says 'Google Play Services not supported by your device, please contact your manufacturer' (no noticible issues from this, google stuff i've tried so far works). I have included a screenshot so you can see my baseband and rom version, etc.
Now, i had a great deal of trouble getting a rom flashed to start with, CWM put me into a bootloop and TWRP wouldn't flash anything because it said it couldn't mount /storage when i tried. Used Philz advanced CWM (love it btw, will be using it from now on). Still wouldnt flash the hltespr specific CM11 version so had to use the unified hlte version (it gave me the status 7 asserts issue, but editing the asserts out just gave me a bad file error when flashing). I wiped data/cache/dalvik between each flashing. I don't know if any of that would have bearing on this problem, just including any details i can. Any advice?
Click to expand...
Click to collapse
Have you upgraded your bootloader to NH7? I know most of the newly-updated CM-based ROMs require you to be on NH7 before flashing. That's most-likely why you weren't able to flash the htlespr ROMs. The unified ROMs no longer include the correct APNs for Sprint, so that's why you don't get service on it. I don't know why mobile data works on it.
topherk said:
Have you upgraded your bootloader to NH7? I know most of the newly-updated CM-based ROMs require you to be on NH7 before flashing. That's most-likely why you weren't able to flash the htlespr ROMs. The unified ROMs no longer include the correct APNs for Sprint, so that's why you don't get service on it. I don't know why mobile data works on it.
Click to expand...
Click to collapse
No, didnt realize that i needed to do that. I'll do some research on it because i don't have any idea how to update the bootloader. If you have a link to a good tutorial that would be wonderful! Thanks!
Ok so i tried that, found this tutorial, followed it, no luck. Tried full wipe/reset after that to see if it would let me install the hltespr versions, still no dice. Same situation, mobile data works, calls don't. Will have to wait till daylight to try texting so i don't wake anyone up but i suspect that texting won't work either. Has anyone experienced this and fixed it? Lol i really didn't drop $100 on a phone to be saddled with all the Samsung and Sprint baloney that it comes with, don't wanna unroot....
Bump
Anyone have ideas on this? Have continued to try fooling around with the udater-script file to resolve the status 7 problem so I can install the hltespr variant, still no dice. Please someone help!
Bump!
Sorry, I typically don't have access to XDA forums on the weekend, so couldn't answer your question till now.
You flashed only the baseband/modem, not the Bootloader. If you want to update the Bootloader, you need to use ODIN to flash the Complete OTA NH7 Update.
In order to update the Bootloader, you need to make sure that you use the PC ODIN (not the mobile one) and that you completely power off the phone before you enter download mode (don't access download mode by using the extended power menu when shutting down the phone). I don't think you need to do the battery pull that Freeza had in his instructions (I didn't do it when I ODIN-flashed the NH7 OTA update), but it wouldn't hurt to do it.
Thanks for that, I will try it as soon as I get home tonight! The next thing I had decided to try was to unroot, to back to stock, then try flashing that before I start with the custom recovery and ROM. Do you think I should do that first before doing the whole thing or could that work just flashing that with my phone as-is?
Verilin said:
Thanks for that, I will try it as soon as I get home tonight! The next thing I had decided to try was to unroot, to back to stock, then try flashing that before I start with the custom recovery and ROM. Do you think I should do that first before doing the whole thing or could that work just flashing that with my phone as-is?
Click to expand...
Click to collapse
Well, I always recommend a full wipe (data, system, cache, dalvik) when flashing ROMs. I haven't wiped my internal storage or external storage since I got the phone, so that's not really necessary.
I don't think that unrooting your current ROM is necessary. Flashing the ODIN OTA update will automatically remove root access, so that's not an issue. Here's the steps I took when I updated to NH7 and installed my current ROM (see my sig):
Make a Nandroid backup.
I always do this just so I have a "record" of what I left behind. It also allows me to have all of my app data that I can restore via Titanium Backup (you have to buy the Pro version in order to restore specific apps from a Nandroid backup). I always store a copy on my ext. storage and on dropbox.
Do a full wipe
As I mentioned above, I always wipe data, system, and the caches when flashing ROMs. While I have to take some time to get the new ROM exactly as I like it, it minimizes any potential FCs and errors that some people get when dirty flashing.
Install NH7 all-in-one via ODIN
I installed the NH7 via ODIN. Please note that this is the fully stock, unrooted ROM and will also install the stock recovery.
Let the phone boot and connect to Sprint. Update Profile and PRL.
I do this periodically whenever I go back to stock (from AOSP). I rarely have connection issues, but updating the PRL an profile can help with those.
Install a custom recovery using ODIN.
My recovery of choice is TWRP, but others have found just as much success with CWM and Philz. Just make sure that you're installing the correct version of the recovery (4.4.X version, not the 4.2.X version). I always reboot to the main system after installing a recovery, but that's up to you. In the rest of this post, I'll say "TWRP," but I really mean "custom recovery."
[OPTIONAL] Make a Nandroid backup of the stock ROM
I always do this, but I recognize that it's not necessary, especially since we can just ODIN back to this image at any time. I just like having the option of having a stock backup on the device (in case catastrophe strikes while I'm away from a computer).
Use TWRP to flash your AOSP ROM of choice.
If you haven't installed any apps or messed around with the settings, you shouldn't have to wipe before flashing, but (in case you haven't noticed by now), I tend to err on the side of caution, specifically: wiping everything (data, system, and the caches) before I flash anything.
Set up the ROM how you like it and [OPTIONAL] make one last Nandroid Backup
Whenever I set up a new ROM to the exact way I like it (statusbar settings, accounts set up, apps installed and configured, etc), I make a nandroid backup of my device. This allows me to go back to that "fresh" image whenever something happens to the device and I don't have to muddle around fixing those minor tweaks. Again, I tend to err on the side of wiping the phone too often and taking too many backups, but I've rarely had issues with my phone and ROMs because of it (to the point where I can spend most of my XDA time helping others with their phones), so it might be prudent to follow the advice.
Anyways, that's how I upgraded to NH7 and installed a custom ROM. Others may take a less conservative approach and you're welcome to adjust any of the optional steps.
Hope this helps!
-Topher
OK, did all that successfully, when it went back to stock stiil had the same issue. Mobile data functions, mobile network for calls/SMS doesn't. Did the whole update prl/profile and even tried reactivating from settings, still nothing. Was able to install custom recovery (Philz) and the hltespr CM11 variant instead of the unified generic version. Still has the same problem, mobile network not available. Everything else works perfectly. I did verify in settings that it still wound up as the NH7 after everything I did. Note I did a full reset before each thing that got flashed in this process, and one more for good measure after. Let it boot to the system between steps too.
Lol I've been rooting and switching between ROMs for years and have never encountered anything like this. I'm stumped....
Verilin said:
OK, did all that successfully, when it went back to stock stiil had the same issue. Mobile data functions, mobile network for calls/SMS doesn't. Did the whole update prl/profile and even tried reactivating from settings, still nothing. Was able to install custom recovery (Philz) and the hltespr CM11 variant instead of the unified generic version. Still has the same problem, mobile network not available. Everything else works perfectly. I did verify in settings that it still wound up as the NH7 after everything I did. Note I did a full reset before each thing that got flashed in this process, and one more for good measure after. Let it boot to the system between steps too.
Lol I've been rooting and switching between ROMs for years and have never encountered anything like this. I'm stumped....
Click to expand...
Click to collapse
Dumb question but are you a Verizon customer or Sprint?
Sent from my SM-G900P using Tapatalk
Sprint, I've had big red before but when they did away with unlimited data it wasn't worth paying their high rates.
Bump!
Anyone have any ideas on this? I am just confounded as to why this continues even after being reset to stock.
Same Issue!!!
I have the exact same issue and have been trying to resolve it for the last 2 days... Did you find a solution?
I have the same problem on a Samsung Mega. LTE and 3G data work but phone won't dial if LTE is active. It WILL voice dial if only 3G is active. Sprint. CM11.
I had this problem after flashing ROMs as well, but went into Settings>Connections>More Networks>Mobile Networks>Network Mode and selected LTE/CDMA....no network had been selected. That fixed me right up. Weird part is, I could still avcess the web without WiFi....but couldn't make calls or ise my bluetooth headset until I had performed the above steps. Hope that helps.
thanks forget the little things reset wifi and sprint cell extender
GAPO said:
I had this problem after flashing ROMs as well, but went into Settings>Connections>More Networks>Mobile Networks>Network Mode and selected LTE/CDMA....no network had been selected. That fixed me right up. Weird part is, I could still avcess the web without WiFi....but couldn't make calls or ise my bluetooth headset until I had performed the above steps. Hope that helps.
Click to expand...
Click to collapse
Q&A for [ROM] Empty [VZW] Galaxy v3.8 [I545VRUFNK1] 12/19
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Empty [VZW] Galaxy v3.8 [I545VRUFNK1] 12/19. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Rooting fnk1
So this might be a silly question but after upgrading to 4.4.2 via samsung kies, I can't find a root method that will work for VRUFNK1.... I tried towelroot but it doesn't support my device. If I want to try this rom out how do I go about rooting my S4 VZW?
question for wtfchuck about empty vzw galaxy
after you did the Alternative Custom ROM Method: to update to NK1 and flash ss, super su etc, did you immediately flash the custom rom or did you let the system boot and reboot into safestrap and then flash empty galaxy?
thanks
Brian
reliant_turbo said:
after you did the Alternative Custom ROM Method: to update to NK1 and flash ss, super su etc, did you immediately flash the custom rom or did you let the system boot and reboot into safestrap and then flash empty galaxy?
thanks
Brian
Click to expand...
Click to collapse
Nevermind. I allowed the phone to reboot and i got a bunch of "Backup Assistant Has Stopped" errors. Apparently my data backup had something in there that was causing this error.
I went back to safestrap, wiped, flashed empty galaxy, flashed modules and booted into empty galaxy with no issues. apps are installing as we speak.
Brian
rotate_on_home
I couldn't get rotate_on_home.zip to work. I flashed it in safestrap.
Any tricks/tips/setup info for this?
Brian
** [ROM] Empty [VZW] Galaxy v3.92 [I545VRUFNK1] 1/2** system cannot be backed up
System cannot be backed up via Safestrap after installing empty galaxy v3.92. Safestrap always says "backup complete failed" (in red letters). Did full update to I545VRUFNK1 via directions on this page http://forum.xda-developers.com/galaxy-s4-verizon/general/how-to-root-i545vrufnk1-4-4-2-12-1-2014-t2959613. Tried both methods, odin only method and safestrap method. Both worked ok and I am able to back up system via safestrap from here. However as soon as I install empty galaxy v3.92, whether doing a factory reset (via normal recovery or safestrap) or advanced wipe via safestrap or no wipe at all I lose abiltiy to backup system. Tried both Safestrap-JFLTE-3.72-kk-B01 and Safestrap-I545-3.75-KitKat-A03.
I spent hours trying to solve this and got nowhere. I can back up system on stock I545VRUFNK1 no problem but as soon as I install empty galaxy v3.92 via any type of wipe or no wipe at all I can no longer backup system. I can confirm I am on baseband I545VRUFNK1, Android Version 4.4.2 and using I545_NK1_Modules. I have tried every option under the sun seems the problem lies with empty galaxy v3.92.
** [ROM] Empty [VZW] Galaxy v3.92 [I545VRUFNK1] 1/2** system cannot be backed up
Fixed??!!
Went for a ride into the city this afternoon, listened to some Bluetooth music, changed theme in supersu, set correct time zone in safestrap
No major changes made
Decided to give it another go after like 8 hours of trying to solve this yesterday. System (and data) backs up ok now.
From what I have read in the General section for this device, you need to do the temporary kernel downgrade method to root NK1 with towelroot. ..
Sent from my SCH-I545 using XDA Free mobile app
Yeah I did just that. Used I545VRUFNK1_I545VZWFNK1_I545VRUFNK1_HOME.tar via odin to upgrade to NK1 (came from CarHD 32.1S v2 NG6-NCx STOCK so unable to get OTA update). Once I update to NK1 use odin to flash I545_NC5_Stock_Kernel, run towelroot, then use odin to flash I545_NK1_Stock_Kernel. Then install supersu.
Honestly I don't know how I fixed it. My best guess is somehow having the wrong time zone in safestrap somehow caused a problem backing up system. All I know is now I can back up system ok (data too).
Thanks for the help anyway...still worth giving a thumbs up!
phone issue when connecting bluetooth during call
i have an issue that ive found. when i accept a call and then connect my bluetooth headset, com.android.phone crashes and i cant hear anything in my bluetooth headset. i can still talk on the phone and sometimes it switches to speaker. i cant hang up either even if i click phone again.
i managed to recreate it and recorded a logcat with catlog but i dont really know what everything is doing in there or if i caused it with an app conflict.
normally i have my bluetooth headset connected first and then make a call and thats fine. i just switched to this rom last friday or saturday and i dont think i connected the headset during a call since then.
thanks.
I am a bit confused over what is the purpose of the empty galaxy rom. Does it actually free up any space on the internal storage? My S4 seems to have about as much free space as running a full stock rom. What are the actual advantages of running the empty galaxy rom versus a full stock rom?
I love the work on this rom and enjoy running it. I am just curious as to why my S4 only has 6.5 gb free on the internal storage when I barely have any apps installed.
beavis5706 said:
I am a bit confused over what is the purpose of the empty galaxy rom. Does it actually free up any space on the internal storage? My S4 seems to have about as much free space as running a full stock rom. What are the actual advantages of running the empty galaxy rom versus a full stock rom?
I love the work on this rom and enjoy running it. I am just curious as to why my S4 only has 6.5 gb free on the internal storage when I barely have any apps installed.
Click to expand...
Click to collapse
The current size of this rom is less than 1 gig. Current stock 4.4.2 is approx 2.6 gig so there is 1.5 gig saved... UNLESS...you are keeping stock rom in Stock slot and employing slot-1 for custom rom which means you have approx 3.5 gig in just rom. I run EVG in Stock slot leaving other slots empty and have 101 USER apps on phone w/ 6.5 gig left on internal SD.
Nk1 modules
Where can I download Nk1 modules?
thank you
I just wanted to thank you for this rom. It works great, and is the only one I've had zero problems installing. Are you going to be developing one for the lollipop update once it's released? Perhaps one that can be installed with safestrap so that we don't have to do the ota update and lose root access?
Problems with GPS and Keyboard.
Hi I'm still new to flashing roms and such. But I have a Verizon S4 with a FRESH INSTALL of NK1 Towel rooted with Safestrap v3.75, I've attempted to install your rom to my phone and it goes through fine. I have flashed the NK1 Modules. However my GPS is locked on PowerSaving, I can not switch to accurate. Also when I attempt to switch to SwiftType (Keyboard) it prompts me that it may collect data, I ok that and it goes back to Samsung Keyboard. How can I override these? I am having issues with "EGR_TWUI_321". Thanks for your help. If you need more information let me know what you need and I'll try to reply promptly.
So just out of curiosity I wiped my system and started over from a base NK1 then I went through the steps of rooting and Safestrap, but I installed the 3-4-15 version this time. And the above issues are not present. However I really dislike this one when compared to the newest one when it comes to theme and customizing. It's also not as bloat free as the other one. I still have Amazon music and NFL and even VZTones.... Any idea why the newest one is breaking the GPS and the Keyboard? I really want to run that one again =(
MuddyCupz said:
Where can I download Nk1 modules?
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=95832962473396366
armyofsquirrels said:
Hi I'm still new to flashing roms and such. But I have a Verizon S4 with a FRESH INSTALL of NK1 Towel rooted with Safestrap v3.75, I've attempted to install your rom to my phone and it goes through fine. I have flashed the NK1 Modules. However my GPS is locked on PowerSaving, I can not switch to accurate. Also when I attempt to switch to SwiftType (Keyboard) it prompts me that it may collect data, I ok that and it goes back to Samsung Keyboard. How can I override these? I am having issues with "EGR_TWUI_321". Thanks for your help. If you need more information let me know what you need and I'll try to reply promptly.
So just out of curiosity I wiped my system and started over from a base NK1 then I went through the steps of rooting and Safestrap, but I installed the 3-4-15 version this time. And the above issues are not present. However I really dislike this one when compared to the newest one when it comes to theme and customizing. It's also not as bloat free as the other one. I still have Amazon music and NFL and even VZTones.... Any idea why the newest one is breaking the GPS and the Keyboard? I really want to run that one again =(
Click to expand...
Click to collapse
It sounds like you either done a dirty flash or your system didn't get wiped properly.
That or those apps are being restored from the Play Store. I could be wrong but I don't believe any of those apps are even in the rom.
Maybe a factory reset (full wipe) and a clean install would solve your issues.
sent from a Galaxy S4 far far away.
gadget! said:
It sounds like you either done a dirty flash or your system didn't get wiped properly.
That or those apps are being restored from the Play Store. I could be wrong but I don't believe any of those apps are even in the rom.
Maybe a factory reset (full wipe) and a clean install would solve your issues.
sent from a Galaxy S4 far far away.
Click to expand...
Click to collapse
Thanks I'll try starting over from base and seeing what happens and I'll update you. Towel is the app used to root the NK1 firmware, safestrap is the app that we who are stuck on Verizon with a locked bootloader have to use to flash roms. SwiftKey is a keyboard app from the play store. Or where you talking about my second flash with the 3-14-15?
armyofsquirrels said:
Thanks I'll try starting over from base and seeing what happens and I'll update you. Towel is the app used to root the NK1 firmware, safestrap is the app that we who are stuck on Verizon with a locked bootloader have to use to flash roms. SwiftKey is a keyboard app from the play store. Or where you talking about my second flash with the 3-14-15?
Click to expand...
Click to collapse
I know what all of those are, I was referring to your statement about the bloatware...
armyofsquirrels said:
I still have Amazon music and NFL and even VZTones...
Click to expand...
Click to collapse
gadget! said:
I know what all of those are, I was referring to your statement about the bloatware...
Click to expand...
Click to collapse
Gotcha. I thought it was weird too still have them too. I just reinstalled the newest version this morning. Everything seems to be working now. Not sure what happened since it was the only Rom I installed.
Q&A for [ROM][CM12.0] Official CM12.0 for E970
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][CM12.0] Official CM12.0 for E970. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
wkobaint said:
Could this versions working on e975?
Click to expand...
Click to collapse
Nope, but if you choose you model from device list below, it will works.
So I dirty flashed this over my cm11 and Google play has stopped working. Won't connect at all. Any help is appreciated
Volstagg.The.Valiant said:
So I dirty flashed this over my cm11 and Google play has stopped working. Won't connect at all. Any help is appreciated
Click to expand...
Click to collapse
Did you flash 5.0 gapps?
dandrumheller said:
Did you flash 5.0 gapps?
Click to expand...
Click to collapse
Nope. Could find only old gapps
terribly sorry about the brain fart. whole problem arose because i didnt flash the correct gapps . got the gapps from xda and now its working well. but i am getting a pop up saying that google play services have not been installed on your computer etc...
will this problem go away if i just install the google play services apk?
edit : after flashing the proper gapps, an update from the play store solved everything. Now running smoothly.
since i updated to cm12,go power master has not been able to turn data off when the screen turns off. this was working flawlessly in kitkat. even the go power master widget is not working. thought there might be a problem with root,so flashed supersu 2.40 from recovery. but still it isnt working. any idea what the problem might be?
Volstagg.The.Valiant said:
since i updated to cm12,go power master has not been able to turn data off when the screen turns off. this was working flawlessly in kitkat. even the go power master widget is not working. thought there might be a problem with root,so flashed supersu 2.40 from recovery. but still it isnt working. any idea what the problem might be?
Click to expand...
Click to collapse
Has the app been updated to support LP? At times in the past, access for 3rd party apps to stuff like data connection, which requires root, sometimes changes functionality with version upgrades. Don't know if that's the case in this circumstance, but it's something to look into.
Performance drop
Flashed this rom with fulll wipe. Works well, but sometimes performance *drops* happens. It becomes VERY slow, like CPU speed drops down to 128mhz. I had the same problem on cm 11.
Who knows how to fix it?
Looking great and functions great but I am getting terrible battery life due to "miscellaneous" or "Cellular Standby" according to battery stats.
E970
1/15/2015 nightly (problem persists from previous nightly)
Same problem on stock and Solid_GEEB Kernel
PA 5.0 GAPPS
Lucky to get 12 hours of battery under normal use. Any suggestions?
Thanks,
-Nick
Any ideas how to fix my issue with the BT mac address being changed to "00:00:00:00:5A:AD"? I had the wrong address on CM11 also but it was a different incorrect address and I was able to fix it. I've posted details in my thread for fixing the issue on CM11. http://forum.xda-developers.com/showthread.php?t=2759056#post58131969<br/>
Video call issue
Video call isn't working in both skype and viber. Skype app is crashing as soon as I turn video on. Viber just doesn't turn on the video transmission. Can please somebody report about this issue to CyanogenMod team. I use video calling really often, so this is kind of issue keeps me away from using official CM12 builds. CM11 builds had this issue too and it hasn't got fixed till now.
azatheadfi said:
Video call isn't working in both skype and viber. Skype app is crashing as soon as I turn video on. Viber just doesn't turn on the video transmission. Can please somebody report about this issue to CyanogenMod team. I use video calling really often, so this is kind of issue keeps me away from using official CM12 builds. CM11 builds had this issue too and it hasn't got fixed till now.
Click to expand...
Click to collapse
Post a logcat of it happening.
Sent from my LG-ls990 using XDA Free mobile app
CM Updates
Settings - About phone - CyanogenMod updates indicates no new updates found despite new updates posted at http://download.cyanogenmod.org/?device=e970. I switched from unofficial CM12 to official CM12 several updates ago. I'm using the gapps posted here https://s.basketbuild.com/gapps. Is there a setting I need to revise to begin seeing the CM updates on my phone. It's no big deal since I can go to the CM device list and download directly.
alliance1975 said:
Settings - About phone - CyanogenMod updates indicates no new updates found despite new updates posted at http://download.cyanogenmod.org/?device=e970. I switched from unofficial CM12 to official CM12 several updates ago. I'm using the gapps posted here https://s.basketbuild.com/gapps. Is there a setting I need to revise to begin seeing the CM updates on my phone. It's no big deal since I can go to the CM device list and download directly.
Click to expand...
Click to collapse
The 1/27 update was detected and installed. I do not know what if anything i did to make it work.
Shelnutt2 said:
Post a logcat of it happening.
Sent from my LG-ls990 using XDA Free mobile app
Click to expand...
Click to collapse
Sorry for late answer. I was too busy to post logcats earlier. I hope issues will get fixed.
I installed CM12.0 (1/27 build) but any 5.0 gapps I try fails to flash on the official TWRP 2.8.3.0 for the e970. I've tried bpear, PA, and one other. I can get the ROM to boot, then it gives FC's for every Google App, and the apps are all named by their com. ... name, and say "app not installed" when clicked. I have loaded the zip files over wifi, through adb push, via usb, and through straight download to the device. I've also run them from the external SD and the internal storage.
Is there a different recovery I should be using with this? Will a Nexus 4 recovery work on the e970?
thunder2132 said:
I installed CM12.0 (1/27 build) but any 5.0 gapps I try fails to flash on the official TWRP 2.8.3.0 for the e970. I've tried bpear, PA, and one other. I can get the ROM to boot, then it gives FC's for every Google App, and the apps are all named by their com. ... name, and say "app not installed" when clicked. I have loaded the zip files over wifi, through adb push, via usb, and through straight download to the device. I've also run them from the external SD and the internal storage.
Is there a different recovery I should be using with this? Will a Nexus 4 recovery work on the e970?
Click to expand...
Click to collapse
I'm using TWRP 2.8.4.0 recovery. I initially installed the CM12 unofficial rom along with this gapps:
https://s.basketbuild.com/gapps
and had no problem. I switched to official CM12 when announced by Shelnutt2 and have made no changes to gapps. Perhaps give that gapps a try.
Audio calls problem
Hi,
I recently updated my OS from LG's Official 4.1.2 to CM12. Everything seems to be working fine but for making/receiving calls. I am not able to hear or speak over the microphone and speaker outlet unless or until I use a headphones in which case both work properly. Can anyone please help?
Details on my upgrade:
I had backed up my data and downloaded the CM12 zip files with Gapps and SuperUser into my SD card. Once they were ready, I restarted my mobile in Recovery mode and wiped the user data and installed CM12.zip followed by Gapps followed by SuperUser. Then rebooted my mobile and check everything for the working condition. It was working perfectly except for the fact that when I receive phone calls or when I make a phone call once I attend the call, I would not be able to speak to the person or hear the person in normal mode nor in speaker mode. The only way it works is if I use my headphones.
I had installed CM12 01/26/2015 version. And have tried later versions until 01/30 but I do not find that to be fixing. It would be of great help if anyone could help me.
Thanks,
Arun
arun.rama said:
Hi,
I recently updated my OS from LG's Official 4.1.2 to CM12. Everything seems to be working fine but for making/receiving calls. I am not able to hear or speak over the microphone and speaker outlet unless or until I use a headphones in which case both work properly. Can anyone please help?
Details on my upgrade:
I had backed up my data and downloaded the CM12 zip files with Gapps and SuperUser into my SD card. Once they were ready, I restarted my mobile in Recovery mode and wiped the user data and installed CM12.zip followed by Gapps followed by SuperUser. Then rebooted my mobile and check everything for the working condition. It was working perfectly except for the fact that when I receive phone calls or when I make a phone call once I attend the call, I would not be able to speak to the person or hear the person in normal mode nor in speaker mode. The only way it works is if I use my headphones.
I had installed CM12 01/26/2015 version. And have tried later versions until 01/30 but I do not find that to be fixing. It would be of great help if anyone could help me.
Thanks,
Arun
Click to expand...
Click to collapse
Make a clean flash (in TWRP wipe system, data, cache, dalvik cache and after install cm12 and gapps) and install 84/27 hybrid modem during same recovery session, after reboot to system. Modem issues with e970 are really whimsical. I hope this will help.
P.S. Find modem image in this thread:
http://forum.xda-developers.com/showthread.php?t=2584981
azatheadfi said:
Make a clean flash (in TWRP wipe system, data, cache, dalvik cache and after install cm12 and gapps) and install 84/27 hybrid modem during same recovery session, after reboot to system. Modem issues with e970 are really whimsical. I hope this will help.
P.S. Find modem image in this thread:
http://forum.xda-developers.com/showthread.php?t=2584981
Click to expand...
Click to collapse
Hey, I just tried the steps you had mentioned and it worked like a gem. Thanks a lot for your solution. I really appreciate your help. Have a great weekend.
Arun
Q&A for (ROM)(ODIN)OC5 stcock firmware tar
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for (ROM)(ODIN)OC5 stcock firmware tar. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
J_apa_n said:
Hey does anyone wanna share their buildprop, my network is coming up chameleon.
I'd prefer one for Boost Mobile, but that's probably asking for too much, so sprint will do.
Click to expand...
Click to collapse
I am running the NORMA s6 port ROM on my Sprint note 3, it took a lot of searching and edits but I finally got my network to show up as Boost Mobile AND I have working 4g (working 3g and 1x too).
MMS, GPS, NFC all work as well.
I don’t have 10 posts yet so I can’t contribute on main thread, but when I get home later today I will post my build.prop for you if you’d like. It contains some edits at the bottom of it which were placed there from a “universal boost apn fix” I flashed from the “LG all things root” guide I frequented when I had the LG Volt.
After flashing this, and editing my apns.conf file to have the appropriate info for Boost apn, my lte started working and I haven’t had to mess with my phone ever since.
Jfuginay said:
I am running the NORMA s6 port ROM on my Sprint note 3, it took a lot of searching and edits but I finally got my network to show up as Boost Mobile AND I have working 4g (working 3g and 1x too).
MMS, GPS, NFC all work as well.
I don’t have 10 posts yet so I can’t contribute on main thread, but when I get home later today I will post my build.prop for you if you’d like. It contains some edits at the bottom of it which were placed there from a “universal boost apn fix” I flashed from the “LG all things root” guide I frequented when I had the LG Volt.
After flashing this, and editing my apns.conf file to have the appropriate info for Boost apn, my lte started working and I haven’t had to mess with my phone ever since.
Click to expand...
Click to collapse
There are some more things that you will need to edit to enable all of the Boost mobile features for the rom. Specifically in CSC. If you need more info send me a PM and I can help you get your rom even sweeter!
I don't know if this is the right place to be posting this. So forgive me if this question is in the wrong place. I upgraded (with Odin v3.07) from 4.4.4 to NH7 (I believe) and then to OC5. Everything worked fine until I tried to install TWRP. It wouldn't work. It just refused to replace the stock recovery with TWRP. So I finally got Odin to reinstall the software (OC5) again after doing a factory reset and cache reset. After getting OC5 to work I booted to stock recovery. When I rebooted into the OS, I started getting before booting was complete, a message saying, "Unfortunately<An App> has stopped". Pulled the battery, replaced it and same thing. Has anyone seen this before, and if so what did you do to fix this?
Thank you,
Owen M, Jones
I don't know if there is any missing info on your explanation. I did notice problems on the ota. I also noticed differences between ota and full odin tar. The first difference i noticed with the full odin tar is the android wiggled its antennas. The second thing I noticed was the initial setup looked different vs ota.
I was also getting system app stopped responding message. I was also too aggressive with titanium backup freezes. Things I used to get away with, were mucking up operation. Out of final despair, I decided to only freeze apps that showed up in the regular app menu, that I didn't use. So far, no force closes. A week or so has past and no issues so far. There area few apps that are showing up in play updates, that aren't in the normal app menu list, and I'm not updating them. The app isn't responding got so bad for me that i couldn't get fully booted to back up anything, and lost data that I wish I could have backed up. Oc5 is tempermental.
My latest snafu was freezing apps so much that settings didn't work. I unfroze everything and only froze apps that were in the app menu. Before I did that, wifi and wifi calling were forced on and a reboot wouldn't turn things off causing that state. That's why I said oc5 is very touchy when digging under the hood and stopping apps and services that you might think are bloat. I might disable ant, which is an app for monitoring fitness hardware, but I just leave it alone and don't update it.
tx_dbs_tx said:
There are some more things that you will need to edit to enable all of the Boost mobile features for the rom. Specifically in CSC. If you need more info send me a PM and I can help you get your rom even sweeter!
Click to expand...
Click to collapse
I'd love to get wifi calling & hotspot running, were you able to get them running?
ojones838 said:
I don't know if this is the right place to be posting this. So forgive me if this question is in the wrong place. I upgraded (with Odin v3.07) from 4.4.4 to NH7 (I believe) and then to OC5. Everything worked fine until I tried to install TWRP. It wouldn't work. It just refused to replace the stock recovery with TWRP. So I finally got Odin to reinstall the software (OC5) again after doing a factory reset and cache reset. After getting OC5 to work I booted to stock recovery. When I rebooted into the OS, I started getting before booting was complete, a message saying, "Unfortunately<An App> has stopped". Pulled the battery, replaced it and same thing. Has anyone seen this before, and if so what did you do to fix this?
Thank you,
Owen M, Jones
Click to expand...
Click to collapse
FIRST odin CF auto-root. THEN odin the latest TWRP that supports your specific device model. SM-N900P. If Odin fails to flash TWRP by doing it in this order then contact the TWRP team and see if they can look into it.
oscarthegrouch said:
I don't know if there is any missing info on your explanation. I did notice problems on the ota. I also noticed differences between ota and full odin tar. The first difference i noticed with the full odin tar is the android wiggled its antennas. The second thing I noticed was the initial setup looked different vs ota.
I was also getting system app stopped responding message. I was also too aggressive with titanium backup freezes. Things I used to get away with, were mucking up operation. Out of final despair, I decided to only freeze apps that showed up in the regular app menu, that I didn't use. So far, no force closes. A week or so has past and no issues so far. There area few apps that are showing up in play updates, that aren't in the normal app menu list, and I'm not updating them. The app isn't responding got so bad for me that i couldn't get fully booted to back up anything, and lost data that I wish I could have backed up. Oc5 is tempermental.
My latest snafu was freezing apps so much that settings didn't work. I unfroze everything and only froze apps that were in the app menu. Before I did that, wifi and wifi calling were forced on and a reboot wouldn't turn things off causing that state. That's why I said oc5 is very touchy when digging under the hood and stopping apps and services that you might think are bloat. I might disable ant, which is an app for monitoring fitness hardware, but I just leave it alone and don't update it.
Click to expand...
Click to collapse
Don't go freezing stuff willy nilly. There's no need for that and it will cause problems. There's too many dependecies and freezing the wrong app will effect other system apps/services. Battery life is great if you turn of services that you don't use.
J_apa_n said:
I'd love to get wifi calling & hotspot running, were you able to get them running?
Click to expand...
Click to collapse
Ofcourse. Give me a couple of days. Current deodexed Lollipop rom is being tested. Once that is done I can help you with these things.
Guys what's up with all the links lately all down or dead or corrupt
R1000 said:
Guys what's up with all the links lately all down or dead or corrupt
Click to expand...
Click to collapse
If you are looking for OC5 tar download the links are fine I can assure you that.
Thanks
could someone get me the verizon baseband and modem file? I have a sprint model, but there is no sprint service here.
jlucero said:
could someone get me the verizon baseband and modem file? I have a sprint model, but there is no sprint service here.
Click to expand...
Click to collapse
Would it be better to ask for this in the Verizon section?
Galaxy Note 3 on 5.0 lollipop
Can anyone tell me how to root the Note 3 on Lollipop? I used Odin to flash oc5, but I lost root. I flashed cf autoroot 4.4.4, but that didn't work. Then someone said load twrp.img in Odin but pda slot didn't give that option. I am new to Samsung so bear with my inexperiance. I usually add on my Nexus devices. Thanks in advance Guys
djprince2001 said:
Can anyone tell me how to root the Note 3 on Lollipop? I used Odin to flash oc5, but I lost root. I flashed cf autoroot 4.4.4, but that didn't work. Then someone said load twrp.img in Odin but pda slot didn't give that option. I am new to Samsung so bear with my inexperiance. I usually add on my Nexus devices. Thanks in advance Guys
Click to expand...
Click to collapse
Both methods should have worked for you, but just have in mind that you can't use the same odin from cfauto root to flash other tar files than the cfautoroot one, and also you won't be able to flash an img file using odin it has to be a .tar or .md5.
Ok, i'm fairly new to this stuff but have successfully rooted and modified several of my devices over the years. I've been attempting to upgrade my vs985 to as close to stock 5.1.1 as i can and after much reading decided on jasmine. I was rooted on kk 4.4.2 12b and I had no problems. the main reason i wanted to upgrade was for compatibility with my android play car stereo. I didn't have twrp so first i downloaded flashify and quickboot then flashed twrp from flashify. All good so far. Next I downloaded jasmine 9.0 and 9.1 or at least i thought lol. As it so happened i mistakenly ended up with one of the files being just the kernel for 5.1.1 35b. Must of been a long day cause I mistakenly failed to backup my current system and proceeded wipe data, cache, dalvik, and flashed the kernel file. As you might imagine it didn't turn out very good. I was stuck in boot loop. Fortunately I could still get into download mode so I was able to use the lg flash tool and I brought it all the way back to 10b stock firmware. Then i grabbed stump and rooted and flashed twrp again. at some point i noticed my cell signal was all over the place, up, down , no signal and it roamed almost constantly if there was any signal. I've had this phone and service for well over a year and never had anything like this at all. I knew it was something I did. I checked the back cover to be sure it was on properly and had good connection with the antenna and all checked out. I decided to go ahead and do the upgrade to jasmine 9.1 hoping this would correct the issue. Well no dice. I did create a backup this time and proceeded to wipe everything and flash 9.0 reboot then wipe nothing and flash 9.1, i guess as you call it "dirty" then reboot again. Here is a link to where i got the zips and instructions
http://forum.xda-developers.com/showpost.php?p=63305722&postcount=4842
in the instructions it says "RESET factory from within ROM (in Settings) - REQUIRED" . this step seemed strange as why would i do a factory reset on my device and erase everything i just did? would it not return it to original? I wasn't even sure if that was what he meant so i skipped that. After all was finished my signal was still all over the place could hardly make a call. it was bad. So once again I used lg flash tool and returned it to stock 4.4.2 10b, this time I wiped the data, cache, delvik and system. To my complete surprise the signal had not improved, in fact it could have actually been worse. As I said waaaaaay at the top of this post before i started all this i was running 4.4.2 12b, not sure how i ended up with 12b as i don't remember any upgrades after i downgraded to 10b and rooted. I froze the ota's with titanium backup but maybe 12b was pushed before i was able to freeze them. Anyway I couldn't figure out how to get 12b back now so I just flashed the 4.4.2 12b modem instead, This time I wiped cache and delvik before and after the flash then rebooted. This fixed my signal, everything seems normal now. no roaming and good signal. my software build however still shows 10b, but I guess thats correct since I only flashed the modem.
I really want 5.1.1 on my G3 but I need my signal too lol. can any one help me figure out how to get this done, can I flash the 12b modem on 5.1.1 this is where i got the file
http://forum.xda-developers.com/verizon-lg-g3/development/rom-jasminerom-v1-0-t2904641 it is way down the bottom of the page. Sorry for the extremely long post i just wanted to make sure i didn't leave any details out.
Any help would be greatly appreciated,
thanks in advance
@Allen227
i dont know if jasmine flashes the L modem when you flash it, but if it doesnt, that would be why you are having issues after flashing the rom.
other than that, i dont know what would cause modem issues.
bweN diorD;4132606 [user=7106818 said:
@Allen227[/user]
i dont know if jasmine flashes the L modem when you flash it, but if it doesnt, that would be why you are having issues after flashing the rom.
other than that, i dont know what would cause modem issues.
Click to expand...
Click to collapse
@Allen227
TL;DR but yes, JasmineROM flashes the appropriate modem. v9.0 only flashes the 24B modem because it doesn't contain a fuller set of the necessary partitions to allow the 35B modem to work by simply replacing the 24B modem with the 35B one.
You can flash the 35B bootstack after flashing JasmineROM 9.0 and the 9.1 update, or SkyDragon 6.x, but you must not be on the 35B bootstack before flashing either UNLESS you also flash the 35B bootstack again after flashing the ROM.
For reasons why: http://forum.xda-developers.com/showthread.php?p=64064555
Edit: I meant to add, the 35B boostack contains the 35B modem and everything needed for it to work with JasmineROM 9.0/9.1.
Hi, anybody from bosses ,plz help, sorry for noob querry... using g3 stock rom 4.4.2 and want to upgrade to lollipop and find jasmine ROM most votes. rooted my device with king root and installed twrp 2.8.7.0 recovry. downloaded jasmin ROM9.0, back up my current rom.
can u please guide me steps,
have i too flash kernal before jasmine ROM? or my existing stock kernal will work fine with jasmine 9.1
placed downloaded ROM in my download folder in phone memory [not in sd Card] , when i would boot in recovry in wipe cache delvik etc will it erase this rom and phone data too???
what if something gone rom? in my g3 there is no option of adb , adb does not work on my g3 dont know why.....
if something gone wrong , can i recover phone?
please see attached pics for some clarification...
sorry for,long post, actualy want to be safe ,,, as i am new for these things ..
tAheEr73 said:
Hi, anybody from bosses ,plz help, sorry for noob querry... using g3 stock rom 4.4.2 and want to upgrade to lollipop and find jasmine ROM most votes. rooted my device with king root and installed twrp 2.8.7.0 recovry. downloaded jasmin ROM9.0, back up my current rom.
can u please guide me steps,
have i too flash kernal before jasmine ROM? or my existing stock kernal will work fine with jasmine 9.1
placed downloaded ROM in my download folder in phone memory [not in sd Card] , when i would boot in recovry in wipe cache delvik etc will it erase this rom and phone data too???
what if something gone rom? in my g3 there is no option of adb , adb does not work on my g3 dont know why.....
if something gone wrong , can i recover phone?
please see attached pics for some clarification...
sorry for,long post, actualy want to be safe ,,, as i am new for these things ..
Click to expand...
Click to collapse
In the future, please do not post the same thing in two different threads. This is against XDA's forum rules. Also, no reason to hijack an only partially related thread. I answered you in the JasmineROM thread.
Sorry for rule breaking, actually i did not aware of that. will avoid surely next time and thanks for reply. hats off to you.
Thanks for your help guys. Last night I figured out my phone was allowing me to send and receive text messages and make outgoing calls but was completely unable to receive any calls. Signal still terribly inconsistent, it would be on 4g one minute then you could watch as it dropped then no service. There'd be no service for 3 or 4 minutes then it would repeat that cycle again. If I switch from global to cdma/let in settings it would immediately regain full signal. Then the cycle of it dropping out would start again. I got to looking through about phone in settings and realized my imei number was missing, all zeros. I'm assuming that probably is the root of my problems. Not sure what to do, I doubt Verizon can help. Phones not insured or under warranty anymore. I haven't researched this New development on te forums yet it got to late last night. If anyone knows of this problem I could use your help. Thanks
Allen227 said:
Thanks for your help guys. Last night I figured out my phone was allowing me to send and receive text messages and make outgoing calls but was completely unable to receive any calls. Signal still terribly inconsistent, it would be on 4g one minute then you could watch as it dropped then no service. There'd be no service for 3 or 4 minutes then it would repeat that cycle again. If I switch from global to cdma/let in settings it would immediately regain full signal. Then the cycle of it dropping out would start again. I got to looking through about phone in settings and realized my imei number was missing, all zeros. I'm assuming that probably is the root of my problems. Not sure what to do, I doubt Verizon can help. Phones not insured or under warranty anymore. I haven't researched this New development on te forums yet it got to late last night. If anyone knows of this problem I could use your help. Thanks
Click to expand...
Click to collapse
If you go into the main Verizon G3 section or possibly the non-Verizon G3 section and use the search field to search for "IMEI" you'll probably find a helpful thread. I think it involves the QPST program on a Windows PC. You'll need the IMEI that it's supposed to have, so hopefully have that on the box or Verizon's website lists it.
Sometimes that's seemed to happen for some people when flashing TOTs, KDZs or ROMs. I've been lucky, it hasn't happened to me through all my flashing over the past year. Once you get it fixed, rooted and put TWRP on, you can back up the IMEI partition in TWRP. It's called something else in TWRP like EI or something - I forget.
Good luck!
roirraW "edor" ehT said:
If you go into the main Verizon G3 section or possibly the non-Verizon G3 section and use the search field to search for "IMEI" you'll probably find a helpful thread. I think it involves the QPST program on a Windows PC. You'll need the IMEI that it's supposed to have, so hopefully have that on the box or Verizon's website lists it.
Sometimes that's seemed to happen for some people when flashing TOTs, KDZs or ROMs. I've been lucky, it hasn't happened to me through all my flashing over the past year. Once you get it fixed, rooted and put TWRP on, you can back up the IMEI partition in TWRP. It's called something else in TWRP like EI or something - I forget.
Good luck!
Click to expand...
Click to collapse
Thanks again I will check that out now
Allen227 said:
Thanks again I will check that out now
Click to expand...
Click to collapse
I have spent sooooo many hours on this. The qpst apk wont see my phone I have done everything the tutorials suggest. the instructions are only applicable if there are no issues, in other words, in a perfect world. I'm sure its something stupid and very simple but I don't even have a place to start. First, its hard to believe this works on all OS's, but it doesn't state anywhere what it is and isn't compatible with. that info would be helpful. i have spent 4 hours a day for over a week trying to get this fixed and I'm no closer than i was when I started. Very frustrating. I'm still open to suggestions or any help that can be offered.