So I've seen the supcase and the MoKo case but I hate both of them. They are so bulky.
Is there any hope of a holster case for the Nexus 6 compatible with a bumper from Crashguard or Spigen until Crashguards gets produced?
I like having my phone feel slim in my hands and look elegant, but yet entering into the phablet I'd much rather have a holster than having it sit in my pocket.
gabessdsp said:
So I've seen the supcase and the MoKo case but I hate both of them. They are so bulky.
Is there any hope of a holster case for the Nexus 6 compatible with a bumper from Crashguard or Spigen until Crashguards gets produced?
I like having my phone feel slim in my hands and look elegant, but yet entering into the phablet I'd much rather have a holster than having it sit in my pocket.
Click to expand...
Click to collapse
Im in the exact same situation-- just now decided to use the search function and stumbled across this thread. Any luck in your search? I am not a fan of adding any more bulk to this phone, and have always preferred the naked phone approach. But with a device this big, I've decided I need to have at least a holster for it. Sadly, everything I look at is either huge beyond belief, comes with a case, or fugly as a giant fanny pack. Just wanted to let you know that if you're still in the market for a modest, slim and functional holster-- I plan to fabricate my own once my preorder arrives. If I'm successful I'll be sure to post a thread.
ignatiusXIX said:
Im in the exact same situation-- just now decided to use the search function and stumbled across this thread. Any luck in your search? I am not a fan of adding any more bulk to this phone, and have always preferred the naked phone approach. But with a device this big, I've decided I need to have at least a holster for it. Sadly, everything I look at is either huge beyond belief, comes with a case, or fugly as a giant fanny pack. Just wanted to let you know that if you're still in the market for a modest, slim and functional holster-- I plan to fabricate my own once my preorder arrives. If I'm successful I'll be sure to post a thread.
Click to expand...
Click to collapse
For now I just have a leather holster thing from eBay that looks ridiculous, but it works for now since I used eBay bucks to get it for free. If you're going to make your own holster for it I'd be very interested in getting one. I've preordered my crashguard bumper and hope they can produce them soon so that I can get it sooner rather than later, right now I just have the spigen bumper case.
Maybe I could help you in the fabrication process
gabessdsp said:
For now I just have a leather holster thing from eBay that looks ridiculous, but it works for now since I used eBay bucks to get it for free. If you're going to make your own holster for it I'd be very interested in getting one. I've preordered my crashguard bumper and hope they can produce them soon so that I can get it sooner rather than later, right now I just have the spigen bumper case.
Maybe I could help you in the fabrication process
Click to expand...
Click to collapse
Well, I shouldn't need any help with the holster. Currently just planning on a simple pouch with a flap cover and belt clip. Nothing fancy at all. Just hoping to make one thats slimmer than what I see online. Could get interesting though-- I haven't touched a sewing machine since I was in 6th grade home ec-- for some reason though, I remember stitching up one bad ass canvas tote hahaha. I'll keep you posted once the damn phone gets here and I can mock something up.
ignatiusXIX said:
Well, I shouldn't need any help with the holster. Currently just planning on a simple pouch with a flap cover and belt clip. Nothing fancy at all. Just hoping to make one thats slimmer than what I see online. Could get interesting though-- I haven't touched a sewing machine since I was in 6th grade home ec-- for some reason though, I remember stitching up one bad ass canvas tote hahaha. I'll keep you posted once the damn phone gets here and I can mock something up.
Click to expand...
Click to collapse
Lol that's basically exactly what I got on eBay for $8. I'd much rather have something like I had for my Nexus 4 where I can still "click" the phone into the holster instead of lifting up a flap for it.
gabessdsp said:
Lol that's basically exactly what I got on eBay for $8. I'd much rather have something like I had for my Nexus 4 where I can still "click" the phone into the holster instead of lifting up a flap for it.
Click to expand...
Click to collapse
Yeah if I could make something like that I would. I can work with fiberglass pretty well, but I don't think I could make a snap in holder. I could probably make one where it slides in though.
ignatiusXIX said:
Yeah if I could make something like that I would. I can work with fiberglass pretty well, but I don't think I could make a snap in holder. I could probably make one where it slides in though.
Click to expand...
Click to collapse
That'd be something I'm very interested in, maybe slides in and then has a flap on the end you can close possibly spring loaded?
gabessdsp said:
That'd be something I'm very interested in, maybe slides in and then has a flap on the end you can close possibly spring loaded?
Click to expand...
Click to collapse
You actually got me brainstorming a sort of hybrid of our two ideas haha.
Well I can't wait to hear a final idea :3
Kydex is pretty easy to work with. I have made a leather and kydex holster for my 1911
Sent from my Nexus 6 using Tapatalk
ajrich80 said:
Kydex is pretty easy to work with. I have made a leather and kydex holster for my 1911
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Yeah I was planning to use leather and fiberglass. Fiberglass molded from the phone to keep a slim fit while lining the inside of the leather holster for support and protection. That was the plan anyway, because I had stock of those two items. However I have yet to find access to a sewing machine... The hell if I'm going to go out and buy one for this hahaha. Kydex may be an option. I've never worked with it before, but seems doable.
---------- Post added at 09:22 PM ---------- Previous post was at 08:45 PM ----------
http://www.amazon.com/Turtleback-Vertical-Genuine-Case-Rotating/dp/B00NMWLYZS/ref=sr_1_5?ie=UTF8&qid=1414957165&sr=8-5&keywords=apple+iphone+6+plus+holster
This may have to suffice for now (if the N6 fits). Its the closest thing I can find to something slim and minimal while hitting on some of the functional points I was looking for. That swiveling clip is a bit of a bonus.
ignatiusXIX said:
Yeah I was planning to use leather and fiberglass. Fiberglass molded from the phone to keep a slim fit while lining the inside of the leather holster for support and protection. That was the plan anyway, because I had stock of those two items. However I have yet to find access to a sewing machine... The hell if I'm going to go out and buy one for this hahaha. Kydex may be an option. I've never worked with it before, but seems doable.
---------- Post added at 09:22 PM ---------- Previous post was at 08:45 PM ----------
http://www.amazon.com/Turtleback-Ve...5&sr=8-5&keywords=apple+iphone+6+plus+holster
This may have to suffice for now (if the N6 fits). Its the closest thing I can find to something slim and minimal while hitting on some of the functional points I was looking for. That swiveling clip is a bit of a bonus.
Click to expand...
Click to collapse
I just got the turtleneck case yesterday and am very happy with it.. It fits a little tight with a slim case but perfect with no case.. I use it with my speigen slim case. The quality it really good
mzimand said:
I just got the turtleneck case yesterday and am very happy with it.. It fits a little tight with a slim case but perfect with no case.. I use it with my speigen slim case. The quality it really good
Click to expand...
Click to collapse
How secure is the magnetic flap?
ignatiusXIX said:
How secure is the magnetic flap?
Click to expand...
Click to collapse
Very secure. Everything about the case is high quality
mzimand said:
Very secure. Everything about the case is high quality
Click to expand...
Click to collapse
Any chance you could share a pic or two of the device in the holster without the case?
ignatiusXIX said:
Any chance you could share a pic or two of the device in the holster without the case?
Click to expand...
Click to collapse
Here you go.
mzimand said:
Here you go.
Click to expand...
Click to collapse
Thanks!
ignatiusXIX said:
Thanks!
Click to expand...
Click to collapse
Its is a really nice fit with no case. I think that is what it is really designed for. I stretched mine out a little so that I can fit it with a case. I have tried many holsters over the years and always end up using a seidio but I think for the Nexus 6 I will stick with the Turtleback. It is hands down the nicest leather holster I have seen. Also I have already purchased 8 different slim cases and prefer the Spigen (SF Black).
Related
Okay I don't think I have to explain why I want a kickstand.
(with a couple people surrounding me and this huge gorgeous display... its easy to show off a YouTube video)
I want a Kickstand on my phone.
I don't want a bulky Otter box case. In fact I don't want ANY cases.
I bought the Clear TPU Kickstand case already.
I want to have a kickstand while preserving the Thin and Slim profile of the Note 3.
So I'm looking for a small kickstand that can be stuck on the back of the device... something that 3M could've made.
And I don't want a SlingGrip or the like... just a kickstand that opens and closes.
If I'm worried about protecting the device I'd use a bumper.
Or I would cover it up carefully in something like a 3M sheet of carbon fibre just like this guy did:
http://forum.xda-developers.com/showthread.php?p=21223112
... and could use that material to fasten the kickstand tighter to the phone's back.
Another possibility is a battery cover which has a kickstand built in.
Any help finding something suitable would be awesome, thanks!
Google stick on kickstand and several come up best looking was at kickitstand.com
Thanks. Kickitstand looks good. I wouldn't want it stuck on all the time, though. I'm looking for something similar and yet different.
toenail_flicker said:
Thanks. Kickitstand looks good. I wouldn't want it stuck on all the time, though. I'm looking for something similar and yet different.
Click to expand...
Click to collapse
The KickITstand is pretty much what I'm looking for.
But:
1) Its too thick
2) Its base/bezels are pretty big
Its not more compact than the TPU Kickstand cases, so it defeats the purpose.
However, I think I found the solution !!!!
Buying a Scosche sticKICK I g4.
http://www.ilounge.com/index.php/reviews/entry/scosche-stickick-g4-for-iphone-4/
Its a thin battery cover for the iPhone 4 / 4S with a Kickstand.
It costs $14, its noticeably thin, and just a basic apparatus.
I'm thinking of getting it.
Breaking away those excess plastic parts and slapping it on my Note 3.
Just need to find out if I can pay by PayPal and if they do shipping to Australia.
If someone can help me purchase this (not money, info) or a product that's similar that would Be Awesome.
Kangal said:
1) Its too thick
2) Its base/bezels are pretty big
Its not more compact than the TPU Kickstand cases, so it defeats the purpose.
Click to expand...
Click to collapse
The reasons are the same for me.
---------- Post added at 10:08 PM ---------- Previous post was at 10:07 PM ----------
Kangal said:
However, I think I found the solution !!!!
Buying a Scosche sticKICK I g4.
http://www.ilounge.com/index.php/reviews/entry/scosche-stickick-g4-for-iphone-4/
Its a thin battery cover for the iPhone 4 / 4S with a Kickstand.
It costs $14, its noticeably thin, and just a basic apparatus.
Click to expand...
Click to collapse
I did see this, prior to your post, but once again it's not quite what I'm looking for. Thanks.
Kangal said:
If I'm worried about protecting the device I'd use a bumper.
Or I would cover it up carefully in something like a 3M sheet of carbon fibre just like this guy did:
http://forum.xda-developers.com/showthread.php?p=21223112
Click to expand...
Click to collapse
I know your primary question was about a low profile kickstand, but I just wanted to point out that if you go this route for carbon fiber that the material is actually vinyl with carbon fiber styling. It's probably not going to protect the phone from anything more than minor scratches.
Have you seen these?
http://www.gogostand.com/
It doesn't attach to your phone but I thought I would provide the option at least.
As the tile asks.
Was going for the Neo Hybrid, but saw on YouTube videos that it adds a significant amount of bulk to the phone, also in dimensions, and it's not that sturdy anyway!
So I need a lightweight case, which will protect the phone, should have a decent amount of lip at front to protect the screen, and the case itself should not be fragile. I find it meaningless when a case requires not to be dropped. I am scared about dropping the phone, that's why I need a case at first place
I personally love UAG cases, but I don't like the hardcore industrialist look on them any more, I need something very simple yet elegant looking, like the Neo Hybrid.
Thanks.
Look at the UAG. Its pretty lightweight but may be more bulky than what you are looking for
Body glove dimensions case I have seidio surface now but does add weight because of the metal kickstand
I've been happy with my Tech21 Impact Tactical case. Good protection for when I need something besides a slim hard case.
1slow4G said:
Body glove dimensions case I have seidio surface now but does add weight because of the metal kickstand
Click to expand...
Click to collapse
This is not available in my location.
SilentJ20 said:
I've been happy with my Tech21 Impact Tactical case. Good protection for when I need something besides a slim hard case.
Click to expand...
Click to collapse
Nor this one!
I guess I will have to stick with mainline brands Isn't there any bumper case for Note 3? A good one I mean. I just need to protect the corners, and a bumper should do that just fine, isn't it?
devilsdouble said:
This is not available in my location.
Nor this one!
I guess I will have to stick with mainline brands Isn't there any bumper case for Note 3? A good one I mean. I just need to protect the corners, and a bumper should do that just fine, isn't it?
Click to expand...
Click to collapse
I also have the bearmotion bumper. Really love that bumper.
1slow4G said:
I also have the bearmotion bumper. Really love that bumper.
Click to expand...
Click to collapse
Well this is listed here, but at an awful price! LOL!
http://www.amazon.in/Bear-Motion-Premium-Bumper-Samsung/dp/B00F5QIVLO
I guess I will have to look for a different bumper case. I just love the feel and look of the back side of my phone so much that I won't like to put on a case other than a bumper.
devilsdouble said:
Well this is listed here, but at an awful price! LOL!
http://www.amazon.in/Bear-Motion-Premium-Bumper-Samsung/dp/B00F5QIVLO
I guess I will have to look for a different bumper case. I just love the feel and look of the back side of my phone so much that I won't like to put on a case other than a bumper.
Click to expand...
Click to collapse
[emoji15] [emoji33] that is expensive. that's the reason I liked the bumper so much. Feels great and protects camera and screen when laying flat.
1slow4G said:
[emoji15] [emoji33] that is expensive. that's the reason I liked the bumper so much. Feels great and protects camera and screen when laying flat.
Click to expand...
Click to collapse
Could you tell me does this bumper have a cutout for the microphone at lower right side of the phone (not the one at bottom), almost at the corner? Cause most bumpers don't!
devilsdouble said:
Could you tell me does this bumper have a cutout for the microphone at lower right side of the phone (not the one at bottom), almost at the corner? Cause most bumpers don't!
Click to expand...
Click to collapse
Yes it does. That's the temperature/humidity sensor btw
Have you looked at Otterbox?
ShadowLea said:
Have you looked at Otterbox?
Click to expand...
Click to collapse
Which one? Commuter or Defender?
They are the ultimate cases for protection, but then again they look very tough and rugged, which I won't like for the Note 3.
Right now the only option for me is to get a bumper, and in bumpers I can only have two, that Bear Motion one as suggested on previous page or some Amzer one, called Border Case or something, but I have no idea if that case has that cutout for the temperature sensor! Has anyone ever heard of this brand Amzer before? I certainly haven't! This is the case I am taking about,
http://www.amzer.co.in/Amzer-Border-Case-Black-P97313.htm
If that case doesn't have the cutout then my only option is to go for the Bear Motion one, but I don't think paying 2X price than what it's worth is reasonable by any means.
Lets see.
devilsdouble said:
Which one? Commuter or Defender?
They are the ultimate cases for protection, but then again they look very tough and rugged, which I won't like for the Note 3.
Click to expand...
Click to collapse
I've got the Commuter. It's a lot more elegant in reality than it looks in the pictures. (At least the black one is). But yes, it's a but bulky. It doubles the thickness if you count the rim on the front as well.
But if you want protection, something slim and sleek will not do much good. I've looked for those options, but they're all more for show than actual protection.
The diztronic tpu might be what you're looking for. Uag, spigen or especially otterbox are far from lightweight. I own the uag and I can drop the phone on any kind of surface without blinking, that case has serious protection. Otterbox is a tank, for construction people.
Yeah thanks guys.
@ShadowLea: Yeah I know that a bumper will not protect the device like an Otterbox would do or a UAG, but I am not looking for that much protection, just protecting the corners will do fine in my case, I think.
@lvnatic: Thanks. I know about UAG and Otterbox. I have used the Maverick on my S4 for a good four/five months, and it can protect the device in a lot of situations, but then I got tired of its look, too rugged, and that too when S4's backside was all glossy cheap type of plastic. For Note 3 and its backside material I can't think slapping a case on it, I just love touching that fake plastic It feels too good. If it were Note 2 or S4, I would not think a second before putting a case on it, because they felt that gross, to me.
Anyway, thanks all for the suggestions. For the time being I am going with a bumper, if I change my mind and consider a more protective case later then I will surely consider the suggested cases in this topic.
Does anybody know of a case that'll work with Samsung's wireless charging battery panel?
Sipgen neo hybrid case
Bit expensive but kinda worth
Its been almost a year since i had it for note 3
djak272 said:
Sipgen neo hybrid case
Bit expensive but kinda worth
Its been almost a year since i had it for note 3
Click to expand...
Click to collapse
Funny you posted this at the same time I added one to my cart on amazon lol. How slippery is it realistically? That's my only concern.
1slow4G said:
Funny you posted this at the same time I added one to my cart on amazon lol. How slippery is it realistically? That's my only concern.
Click to expand...
Click to collapse
The edges are firm but back, its bit slippery
anyways
its an awesome case bro
You won't be disappointed
djak272 said:
The edges are firm but back, its bit slippery
anyways
its an awesome case bro
You won't be disappointed
Click to expand...
Click to collapse
Figured that was the case (see what I did there ?)
I'll give it a try then, the looks are deceiving lol
What color you have? I'm stuck between slate and sliver
I've been interested in having skins on my phones, but I've never had a phone popular enough for companies to produce skins for them.
The HAM2 is no different, but I just found this carbon fiber-looking skin, which, as far as I can tell, is one of the few skins out there for the HAM2. Does anyone here have it, or experience with skins? Are they more protective than cases? Are they grippy or still slippery? I assume the "military grade" and "self-healing" stuff is utter BS? The case I have now is a Nillkin slim case.
Edit: Can't seem to get the link to work for some reason... just search "ArmorSuit MilitaryShield - Huawei Ascend Mate 2"
ScoobSTi said:
I've been interested in having skins on my phones, but I've never had a phone popular enough for companies to produce skins for them.
The HAM2 is no different, but I just found this carbon fiber-looking skin, which, as far as I can tell, is one of the few skins out there for the HAM2. Does anyone here have it, or experience with skins? Are they more protective than cases? Are they grippy or still slippery? I assume the "military grade" and "self-healing" stuff is utter BS? The case I have now is a Nillkin slim case.
Edit: Can't seem to get the link to work for some reason... just search "ArmorSuit MilitaryShield - Huawei Ascend Mate 2"
Click to expand...
Click to collapse
I have that installed on my ipad. Looks pretty cool and would protect from scratches. Does nothing to protect from drop damage etc. Its got some texture to it so it makes it easier to grip. Three year old is watching videos on it right now. When he's done I will post a pic of it.
Well there is a crappy pic for now. Lol I have never taken it off so I don't know of it leaves a mess on the device after removal. But it has taken more than its share of abuse and is still in tact. No holes or wear and tear. And that's after three years of use. Btw the dark spot you see is water.... As my son had spilled some on the table evidently.. Lol
Here is an angle shot so you can see the texture.
Moody66 said:
Here is an angle shot so you can see the texture.
Click to expand...
Click to collapse
Awesome, thanks. I might get it then lol. It looks nice! [emoji1]
Sent from my Ascend Mate 2 using Tapatalk
Good reviews on Amazon and one reviewer wrote that it's a kevlar sticker, and they use it with a case. You planning to use a case or not?
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-Anti-Bubble-Replacement/dp/B00MRQIXEU
ScoobSTi said:
Awesome, thanks. I might get it then lol. It looks nice! [emoji1]
Sent from my Ascend Mate 2 using Tapatalk
Click to expand...
Click to collapse
Use a hair dryer on it when you apply it. Makes it a little softer so it fits better. They ate really stiff. If ya don't heat it a little it will try to flatten out and pull off the edges. I pit few on HP touchpads a couple years ago. Was a pain to get it to lay down. Heat applied and it was smooth as butter.
As you can see on the touchpad it fits nicely around the USB port. Wouldn't until it was heated.
Installation video:
[http://m.youtube.com/watch?v=vbwPpvvFqCE] [ArmorSuit Carbon Fiber Shield Installation Instructions for Cell Phones - YouTube] is good,have a look at it!
divineBliss said:
Good reviews on Amazon and one reviewer wrote that it's a kevlar sticker, and they use it with a case. You planning to use a case or not?
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-Anti-Bubble-Replacement/dp/B00MRQIXEU
Click to expand...
Click to collapse
If I get it I'll decide when I apply it.
Moody66 said:
Use a hair dryer on it when you apply it. Makes it a little softer so it fits better. They ate really stiff. If ya don't heat it a little it will try to flatten out and pull off the edges. I pit few on HP touchpads a couple years ago. Was a pain to get it to lay down. Heat applied and it was smooth as butter.
Click to expand...
Click to collapse
Moody66 said:
As you can see on the touchpad it fits nicely around the USB port. Wouldn't until it was heated.
Click to expand...
Click to collapse
divineBliss said:
Installation video:
[http://m.youtube.com/watch?v=vbwPpvvFqCE] [ArmorSuit Carbon Fiber Shield Installation Instructions for Cell Phones - YouTube] is good,have a look at it!
Click to expand...
Click to collapse
Thanks! :good:
I doubt any case will work if you use the shield. Its very thick. That's why the iPad and touchpad are not in cases. It adds a surprising amount of bulk. I know it will not work with the trident at all. Nor the gell cases. Matter of fact the trident case wouldn't even let it start to slide in. It's designed to be a stand alone protection. But there isn't any real use in putting this on then a case over the top of it anyway.
If a clear TPU case fit, then you could still partially see the carbon fiber and reviewer on Amazon implied using with a case.
If you do get it and have a way of measuring the thickness of the skin, let us know. Otherwise measure case before/after skin .
---------- Post added at 11:57 AM ---------- Previous post was at 11:47 AM ----------
From their website:
http://www.armorsuit.com/need-help#f9
Can I use MilitaryShield on a device that fits within a case?
MilitaryShield is ultra-thin and measures under 1 mm thick. It should be compatible with most cases, but it's also possible that the combination will not fit. That's why we offer the case friendly version for our screen protectors, which is slightly smaller along the edges. Check with your case manufacturer for compatibility.
Not
divineBliss said:
If a clear TPU case fit, then you could still partially see the carbon fiber and reviewer on Amazon implied using with a case.
If you do get it and have a way of measuring the thickness of the skin, let us know. Otherwise measure case before/after skin .
---------- Post added at 11:57 AM ---------- Previous post was at 11:47 AM ----------
From their website:
http://www.armorsuit.com/need-help#f9
Can I use MilitaryShield on a device that fits within a case?
MilitaryShield is ultra-thin and measures under 1 mm thick. It should be compatible with most cases, but it's also possible that the combination will not fit. That's why we offer the case friendly version for our screen protectors, which is slightly smaller along the edges. Check with your case manufacturer for compatibility.
Click to expand...
Click to collapse
Not many cases available for these ham2s. Used one on an iPhone and went through 7 cases before I could find one that fit. And it was a soft rubber one that would stretch. Crapola made. Company is always going to tell u cases may fit. Lol they want to sell product. When the wife gets home i will show a picture of hers with a case attempt... Not a pretty site.
TPU for HAM2 by Mooncase from Amazon fits perfectly. $5.99 shipped from China or Amazon prime. Read the reviews and stay away from crappie stuff.
If it fits good now it won't with armour on it... Been there done that.
divineBliss said:
If a clear TPU case fit, then you could still partially see the carbon fiber and reviewer on Amazon implied using with a case.
If you do get it and have a way of measuring the thickness of the skin, let us know. Otherwise measure case before/after skin .
---------- Post added at 11:57 AM ---------- Previous post was at 11:47 AM ----------
From their website:
http://www.armorsuit.com/need-help#f9
Can I use MilitaryShield on a device that fits within a case?
MilitaryShield is ultra-thin and measures under 1 mm thick. It should be compatible with most cases, but it's also possible that the combination will not fit. That's why we offer the case friendly version for our screen protectors, which is slightly smaller along the edges. Check with your case manufacturer for compatibility.
Click to expand...
Click to collapse
Moody66 said:
If it fits good now it won't with armour on it... Been there done that.
Click to expand...
Click to collapse
Order placed, should be here a week from today. It'd be quite redundant to have the skin on and a case on as well, so I might go with just the skin if it's grippy enough. Will definitely post pics and a small review or something.
Skin came in a few days early. :good: Was annoying to put on the edges but here are some pics.
I messed up around the USB port lol.
Looks nice. What was annoying about the edges? Lining the skin up straight or the skin not sticking? Feel thick? Can you drop the phone now and it will bounce :lol: .
divineBliss said:
Looks nice. What was annoying about the edges? Lining the skin up straight or the skin not sticking? Feel thick? Can you drop the phone now and it will bounce :lol: .
Click to expand...
Click to collapse
Lining up the edges was a pain. The instruction video made it look like a walk in the park lol. Thickness isn't much of a problem, I put my case back on to see if it would fit and it does. I'm not too convinced about dropping the phone though lol.
ScoobSTi said:
Lining up the edges was a pain. The instruction video made it look like a walk in the park lol. Thickness isn't much of a problem, I put my case back on to see if it would fit and it does. I'm not too convinced about dropping the phone though lol.
Click to expand...
Click to collapse
Funny how those videos make everything look easy.
What kind of case was it that you put it back in for fit? Cyclops, TPU, hard back shield, something else?
Have you ever put on a glass screen protector - if so how was it? I have some on order - hope they go on as easy as the video makes them look :lol: ?
divineBliss said:
Funny how those videos make everything look easy.
What kind of case was it that you put it back in for fit? Cyclops, TPU, hard back shield, something else?
Have you ever put on a glass screen protector - if so how was it? I have some on order - hope they go on as easy as the video makes them look :lol: ?
Click to expand...
Click to collapse
Just a hard back shell. I doubt the Cyclops would fit.
I always wanted to get a tempered glass screen protector but I didn't. Next time lol. Not sure, but I think @superbass311 said he had one?
Has anybody tried one yet on the DT2? I want to protect the leather, but still show it off, as well as give some cushioning for light drops due to having wood and tile everywhere in my house.
If anybody has used one, how clear are they? How well is the fitment? Specifically, I'm looking at this one: http://www.amazon.com/gp/product/B0...id=1447601659&ref_=sr_1_19&s=wireless&sr=1-19
Reviews look like it doesn't fit right. Although people are talking about tablets. One says the slots and holes aren't right. Doesn't look promising. I'm waiting for Diztronic because they've never let me down with TPU cases for my phones.
Sent from my XT1585 using Tapatalk
raduque said:
Has anybody tried one yet on the DT2? I want to protect the leather, but still show it off, as well as give some cushioning for light drops due to having wood and tile everywhere in my house.
If anybody has used one, how clear are they? How well is the fitment? Specifically, I'm looking at this one.........
Click to expand...
Click to collapse
I received that very one 2 days ago. I really like it. Was looking for a bumper case as I don't tnink the phone needs a back cover. Couldn't find one so I ordered this one. The back is indeed crystal clear (so far) and shows off my soft grip well. The sides are tpu & offer way more grip than the original metal. All the cutouts line up & the buttons are easy to push. The clear back plastic is apporximately 1/16" thick. I'd buy it again.
Brian
Brian, do you have a picture?
[IMG="Crystal Clear Case"]
https://drive.google.com/file/d/0B6poWRwopgnOeXJKcE1oNWFtSnM/view?usp=sharing
https://drive.google.com/file/d/0B6poWRwopgnOQVdVbWd2ZHlVTDg/view?usp=sharing
https://drive.google.com/file/d/0B6poWRwopgnOOVlMVVdSVWNYVDg/view?usp=sharing
[/IMG]
Don't know if this will work or not. Didn't see a way to attach an image from a local folder so I tried to attach a link to my google drive where the pictures are. Fingers crossed.
buildscapeinc said:
[IMG="Crystal Clear Case"]
https://drive.google.com/file/d/0B6poWRwopgnOeXJKcE1oNWFtSnM/view?usp=sharing
https://drive.google.com/file/d/0B6poWRwopgnOQVdVbWd2ZHlVTDg/view?usp=sharing
https://drive.google.com/file/d/0B6poWRwopgnOOVlMVVdSVWNYVDg/view?usp=sharing
[/IMG]
Don't know if this will work or not. Didn't see a way to attach an image from a local folder so I tried to attach a link to my google drive where the pictures are. Fingers crossed.
Click to expand...
Click to collapse
Pictures worked and looks good. I ordered the same case two weeks ago and was back-ordered from the seller. It's "shipping" now and hopefully i'll be getting this case soon! I also did not want to cover up the back as mine is the leather back.
francoamerican5 said:
Pictures worked and looks good. I ordered the same case two weeks ago and was back-ordered from the seller. It's "shipping" now and hopefully i'll be getting this case soon! I also did not want to cover up the back as mine is the leather back.
Click to expand...
Click to collapse
I bought one of these today. I can confirm that the buttons work well. Here's a riddle: What is flexible on the sides, rigid on the back, and clear all over. This case! *rim shot*
Wow, that looks really good. I'm going to order one asap. Thanks!
Urban Armor Gear has a clear case. I love it.
Sent from my Droid Turbo 2 on Tapatalk
Moto X Style/Pure coming with bumper case. It's cheap, transparent plastic but perfect to protect metal frame. If anyone find the same type for Turbo 2/Force, please let us know.
I bought this: http://www.ebay.com/itm/Authentic-C...476482?hash=item41a2479d02:g:Iq8AAOSw3KFWgIVS
Works great. Add extra piece of mind when holding DROID without excessive bulk.
I finally got my clear case. I was waiting on my Amazon Gift card birthday present because I didn't really want to spend my own money on it, lol
I love it, though. Looks great on the phone and protects the leather.
Rookx said:
Reviews look like it doesn't fit right. Although people are talking about tablets. One says the slots and holes aren't right. Doesn't look promising. I'm waiting for Diztronic because they've never let me down with TPU cases for my phones.
Sent from my XT1585 using Tapatalk
Click to expand...
Click to collapse
+1 on Diztronic, good cases, used them on other phones before, and I have the blue TPU one on my D2 now. Not the slimmest of cases, but very well made and the button feel is perfect, better than naked.
I got the Pleson clear TPU case cause I love the look of this phone, but FWIW, clear cases just seem like lint traps to me. I found myself removing the phone from the case too often to clean out all the pocket lint that was getting sandwiched in there...kept bugging my OCD tendencies. And when it was out one day, you guessed it, dropped on my concrete floor in the basement and dented the corner a bit....GAHHH.
I have this one: http://www.amazon.co.uk/gp/product/B01868SM9S
It fits well and all the ports are uncovered. Don't try using the screen protector that comes with it, the one they sent with mine is too tall for the phone.
mattross said:
I have this one: http://www.amazon.co.uk/gp/product/B01868SM9S
It fits well and all the ports are uncovered. Don't try using the screen protector that comes with it, the one they sent with mine is too tall for the phone.
Click to expand...
Click to collapse
It's similar to one I bought it. I'm using for awhile and fit very well and I like it.
http://www.ebay.com/itm/13170009116...49&var=431081099445&ssPageName=STRK:MEBIDX:IT
Has anyone found an ultra thin case like a Calicase or Peel?
so far i can't find one. i loved the offical LG case for the nexus 5x. it was basically a cover for the back and had cutout on the bottom. all i want is to protect the back from scuffs. don't need a big case.
I'm holding out for the Ringke Slim to come out for the Pixel. It's been a perfect slim case for my old Nexus 5, Nexus 5X, and then the 6P.
I'll be using the Pleson TPU case in the mean time.
I ordered a pleson from amazon. It features some sort of dots on the back to prevent sticking air bubbles patterns. Get get on my s6edge with tpu cases today. We'll see how it holds up.
I've been looking for a thin case myself. I just put my Pixel into this case a few minutes ago:
Crappy S6 Edge photo
Amazon link
I was skeptical because of the top and bottom which typically are nonexistent on these types of cases but I'm very happy.
d-pak said:
I ordered a pleson from amazon. It features some sort of dots on the back to prevent sticking air bubbles patterns. Get get on my s6edge with tpu cases today. We'll see how it holds up.
Click to expand...
Click to collapse
the Pleson one is one of my favorites! here it is on my pixel
roccom33 said:
I've been looking for a thin case myself. I just put my Pixel into this case a few minutes ago:
Crappy S6 Edge photo
Amazon link
I was skeptical because of the top and bottom which typically are nonexistent on these types of cases but I'm very happy.
Click to expand...
Click to collapse
I was looking at this case last night! Looks like the Ringke Slim, which I've had in the past and loved. Was it tight when putting it on? My only concern with these kinds of cases is scraping the edges of the phone when putting it on/taking it off.
daewond3r said:
I was looking at this case last night! Looks like the Ringke Slim, which I've had in the past and loved. Was it tight when putting it on? My only concern with these kinds of cases is scraping the edges of the phone when putting it on/taking it off.
Click to expand...
Click to collapse
I just popped it out and back in to see and no it didn't seem to be too tight. I don't believe this is a concern. The edges of the case are also rounded and have a soft matte type of finish.
Good case option from Amazon
If you need a quick case at a good price, try this one out. I ordered it in advance. It isn't that special but does the basics. I think it is slim, but not ultra slim. Check it out until more cases hit the market. Different colors and styles are available.
Search amazon for this name and brand. $7.99 shipped:
Google Pixel Case, DGtle [Shock Absorbent] Anti-Scratches TPU Gel Premium Slim Flexible Soft Bumper Rubber Protective Case Cover for Google Pixel (Smoke Black)
What I need is something like the custom live cases from Google, but not at $50 CAD. I have a Spigen thin fit on my 6P and I'm looking for something similar, but not clear.
what you guys are listing and talking about are thin cases, OP is looking for ultra thin cases, like the orzly flexslim series:
http://orzly.com/products/flexi-slim
I hoping they will come out with one for the pixel too, these are really just for scratch protection and will offer literally no drop protection, its similar to having a slim on your phone but more flexibility as you can just put it on and take it off easily.
---------- Post added at 10:58 PM ---------- Previous post was at 10:57 PM ----------
roccom33 said:
I've been looking for a thin case myself. I just put my Pixel into this case a few minutes ago:
Crappy S6 Edge photo
Amazon link
I was skeptical because of the top and bottom which typically are nonexistent on these types of cases but I'm very happy.
Click to expand...
Click to collapse
Could you post a few more pics? I'm thinking of ordering this case too.
Thanks!
i'm hoping to go with just a bumper case around the outer edge, because this phone is a beauty and i dont want to cover it up! that said, if i did get a full case and wanted to keep it relatively slim, i'm probably go with the diztronic matte slim case. i have one on my 5x, and it's been not only great at protecting on minor falls and bumps, but has held up extremely well over time. couldn't say enough about that case. looks like amazon currently has it available for purchase, but it's not shipping until 11/4.
I'm using this i love the feel and fit on it. https://www.amazon.com/gp/product/B01LEAMYFS/ref=oh_aui_detailpage_o04_s00?ie=UTF8&th=1
Poli169 said:
I'm using this i love the feel and fit on it. https://www.amazon.com/gp/product/B01LEAMYFS/ref=oh_aui_detailpage_o04_s00?ie=UTF8&th=1
Click to expand...
Click to collapse
Are the edges the same color as the back (a matte black)? or are they glossy?
Poli169 said:
I'm using this i love the feel and fit on it. https://www.amazon.com/gp/product/B01LEAMYFS/ref=oh_aui_detailpage_o04_s00?ie=UTF8&th=1
Click to expand...
Click to collapse
I was interested until I read some reviews stating that it's thick
Sent from my Pixel using XDA Labs
Spigen Case
FoleyRose said:
What I need is something like the custom live cases from Google, but not at $50 CAD. I have a Spigen thin fit on my 6P and I'm looking for something similar, but not clear.
Click to expand...
Click to collapse
http://www.ebay.com/itm/Spigen-Rugg...748052?hash=item3f6ce2e254:g:fj4AAOSwzaJX~SAC
MNMichael said:
http://www.ebay.com/itm/Spigen-Rugg...748052?hash=item3f6ce2e254:g:fj4AAOSwzaJX~SAC
Click to expand...
Click to collapse
Thanks for the suggestion, but that's actually exactly the case I have on right now. What I meant was a case with open top, open bottom and open buttons. But not clear.
There seems ot be some confusion on what an "Ultra thin" case actually is. let me help you guys better understand this, and why android people want huge clunky cases baffles me, but coming from a lifetime of androids, then switching to a 6s, and having a fantastic case experience... this is annoying.
This is an ultra thin case:
https://www.amazon.com/gp/product/B00JH87ZSQ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Notice the use of factory buttons, it does not cover the bottom of the device, yet still wraps the corners so if dropped is protected. so far the closest I have found on amazon for my Pixel is this case from this thread:
https://www.amazon.com/gp/product/B01M3MQCG0/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Which I ordered, and will arrive Thursday.
If there are plastic buttons that cover up the factor buttons that stick out of the case, it's safe to assume it's not an ultra thin case.
Just got that one by Maxboost and I can confirm its definitely the thinnest "case" out there right now. It's definitely a shell more than a case, and it's a bit slick, but overall I think I'm gonna stick with it. I used some fine steel wool to give it some grip, and it feels better IMO.
Sent from my Pixel using XDA Labs
the tree said:
There seems ot be some confusion on what an "Ultra thin" case actually is. let me help you guys better understand this, and why android people want huge clunky cases baffles me, but coming from a lifetime of androids, then switching to a 6s, and having a fantastic case experience... this is annoying.
This is an ultra thin case:
https://www.amazon.com/gp/product/B00JH87ZSQ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Notice the use of factory buttons, it does not cover the bottom of the device, yet still wraps the corners so if dropped is protected. so far the closest I have found on amazon for my Pixel is this case from this thread:
https://www.amazon.com/gp/product/B01M3MQCG0/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Which I ordered, and will arrive Thursday.
If there are plastic buttons that cover up the factor buttons that stick out of the case, it's safe to assume it's not an ultra thin case.
Click to expand...
Click to collapse
Bingo bingo. People don't seem to get it. I settled for the maxboost also but it looks like decent space between the camera and the case worrying me. Calicase and peel are the leaders IMHO in this thin case space. Just no love for the pixel.
charklos said:
Just got that one by Maxboost and I can confirm its definitely the thinnest "case" out there right now. It's definitely a shell more than a case, and it's a bit slick, but overall I think I'm gonna stick with it. I used some fine steel wool to give it some grip, and it feels better IMO.
Click to expand...
Click to collapse
Thanks for confirming. I was hoping for the ultra thin tpu. Can you add some pictures of it after the wool treatment?