[ROM] Stock ZV6 Base - Odex & Deodex - Sprint LG G3

Whoohoo!! We beat the actual update. :good: HUGE Thanks to @autoprime for the files!!!
They seem to have fixed a lot of the bugs we had in ZV4. Actually runs really well. They've also added a couple new things. (Data optimizer, for one)
This is the Stock ZV6. Odexed and Deodexed. Anyone can use this as a base. Just give credit.
What is has:
Bone stock - installs modem, kernel and ROM
Root
Busybox
Zipaligned
Install:
In TWRP, select "Wipe" "Advanced", and select all but int and ext SD. So wipe /system, /data, /cache, and /dalvic.
Flash Rom
On setup, it happens fast. Take your time or you'll end up selecting something you don't want.
Update profile/prl
Profit!!!
Bugs:
None that I have found. You tell me?
Downloads:
Stock ZV6 Odexed
Stock ZV6 Deodexed
Modem/Radio - Flashable zips: - They are interchangeable on either KK. Update profile/prl,then Activate phone. Then go to Settings>More>Mobile Networks and change it to ANYTHING BUT GLOBAL.
ZV6
ZV4
Kernels
Bone Stock_ZV6
Initd_Stock_ZV6
Flashable_init.d_ZV6_MultiRom - This will run before or after MultiRom. So you can flash this, and when you're ready for MultiRom, just flash files #1 and #3 from that thread
Flashable APN's
Flashable_Vanir_APN - If you do a Factory or dialer reset, your phone will not provision. You will need to revert to the stock APN first.
Stock_APN

Hell yea! Thank you!

Thanks @engine95 love your work. Cant wait to try this out

If I flash this, & reinstall bump twrp can we still play around with the cm roms that are out? And thank you for this sir. Damn fast you are!
Sent from my LG-ls990 using Xparent Green Tapatalk 2

Installed with the rin 1.8 kernel and your extreme mixer paths. Working great. Thank you!

aheeejd said:
If I flash this, & reinstall bump twrp can we still play around with the cm roms that are out? And thank you for this sir. Damn fast you are!
Sent from my LG-ls990 using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Short answer is yes. Or maybe i should say, "I think so".
I'm really not sure if reinstalling TWRP will fix that 5sec delay in startup of TWRP we get now. I'm assuming it does. But it's not necessary. It seems to be working fine.
Deodex uploading now.

I hope this update fixes the auxiliary port issue. Thanks for the upload.

Deodexed is up in OP.
BTW
The 5sec delay in TWRP, might be caused by the kernel. I don't know if autoprime "Bumped" it before uploading. And Bump is throwing errors when I try.
The kernel and ROM are working just fine. I'll upload the kernel if this is the issue.

OK so if I flash this, this should update the kernel and modem right? So I go back to my nandroid..which is sacs...will the modem and kernel still stick?... I did all this already but just curious lol

wojo797 said:
OK so if I flash this, this should update the kernel and modem right? So I go back to my nandroid..which is sacs...will the modem and kernel still stick?... I did all this already but just curious lol
Click to expand...
Click to collapse
The modem will stick. The kernel won't unless you uncheck restore boot. Then it SHOULD stick. The date on the new Kernel is Nov 7.

Any idea if pulling just the modem out and flashing it alone will get the gps/compass
fixed for those of us running AOSP builds?

Can this be flashed over my current setup?

treezy26 said:
Can this be flashed over my current setup?
Click to expand...
Click to collapse
I flashed over by previous stock just fine. You should be okay going from stock < stock since its just an update, but if you get any fc errors you might want to wipe and do a clean install.
On a side note I haven't had aux issues yet so this may have fixed it.

engine95 said:
The 5sec delay in TWRP, might be caused by the kernel. I don't know if autoprime "Bumped" it before uploading. And Bump is throwing errors when I try.
The kernel and ROM are working just fine. I'll upload the kernel if this is the issue.
Click to expand...
Click to collapse
you don't bump stock boot.imgs.. they're already signed by LG. bump is only for custom boot.img's
as for the TWRP delay.. no clue. there is no difference in how bump works with the bootloader between zv4 and zv6.

I honestly didn't question that because I didn't know if ZV6 came with a new bootloader that looked for a new sig

RandomPooka said:
Any idea if pulling just the modem out and flashing it alone will get the gps/compass
fixed for those of us running AOSP builds?
Click to expand...
Click to collapse
It might. autoprime had it here. http://forum.xda-developers.com/showthread.php?p=56927992

Ok. I flashed this last night. I had zero issues. No twrp delay either. Clean 3plus wipe all but int and sd ext. So i then ran it til few minutes ago. I just restored my sacs v2. Backup. So far as i already fugured no issue. Thanks all. And engine95 i might like to run a rom off of your zv6..autoprime again thanks. Both. To the unknown finder..thanks
Sent from rotary technology Phone
---------- Post added at 08:36 PM ---------- Previous post was at 08:35 PM ----------
Ok. I forgot one thing. Xda app. My pro or free i could not get to reach server. Lol. Prob on my end. No worries.
Sent from rotary technology Phone

Flashed over stock rooted with no problems. Running good, thanks.

Love it, thanks engine! Quick question, after a couple reboots....My phone got pushed all the sprint bloatware! How did they manage that? and is there a way to undo it?

ver151set said:
Love it, thanks engine! Quick question, after a couple reboots....My phone got pushed all the sprint bloatware! How did they manage that? and is there a way to undo it?
Click to expand...
Click to collapse
Much of Sprint crap can be removed within 'manage apps'. The rest through a file explorer. There's a few threads here on what's safe to remove.

Related

Kernel

I have been trying to flash Imonseyon leankernel v5.1 for awhile now and I'm having issues... I don't know if the link doesn't work or what the deal is. I want the 184v undervolt bc I have been having crazy battery drain.. Everytime I flash it I get a status 2 in TWRP. Any suggestions..
lacoursiere18 said:
I have been trying to flash Imonseyon leankernel v5.1 for awhile now and I'm having issues... I don't know if the link doesn't work or what the deal is. I want the 184v undervolt bc I have been having crazy battery drain.. Everytime I flash it I get a status 2 in TWRP. Any suggestions..
Click to expand...
Click to collapse
What rom are you using?
If it's a Sense based GB rom, did you grab the Sense kernel?
If it's an AOSP GB rom, did you grab the Aosp kernel?
If it's an ICS rom, it won't work.
***EDIT
Via TWRP website:
Since TWRP 2.3 is based on AOSP jelly bean sources, TWRP now uses recovery API 3 instead of 2. Some zips may no longer work if the developer is using an out-of-date update-binary.
This API change should not be a problem on newer devices, but older devices will probably encounter several zips that need to be updated.
If needed, you can try using this update-binary that was compiled with current sources.
It goes in your zip file in the META-INF/com/google/android folder. If you're getting a status error 2 during zip install, then an outdated update binary is almost certainly to blame.
santod040 said:
What rom are you using?
If it's a Sense based GB rom, did you grab the Sense kernel?
If it's an AOSP GB rom, did you grab the Aosp kernel?
If it's an ICS rom, it won't work.
***EDIT
Via TWRP website:
Since TWRP 2.3 is based on AOSP jelly bean sources, TWRP now uses recovery API 3 instead of 2. Some zips may no longer work if the developer is using an out-of-date update-binary.
This API change should not be a problem on newer devices, but older devices will probably encounter several zips that need to be updated.
If needed, you can try using this update-binary that was compiled with current sources.
It goes in your zip file in the META-INF/com/google/android folder. If you're getting a status error 2 during zip install, then an outdated update binary is almost certainly to blame.
Click to expand...
Click to collapse
Ok thank you so much! FAST response lol. Would there be another recovery that is better to use or it doesn't matter?? Currently I am using your, I believe, ICS rooted debloated ROM stock/rooted. I was on liquidsmooth aosp and cm7 thundershed switching between them to get a feel for them... But for some reason I tried to do a full wipe and then reinstall from my restore of those two roms and try the leankernal, it's saying failed after I updated to TWRP 2.4.3
**EDIT:
Where is that zip you are talking about located.. In /system or somewhere else bc I can't seem to find it?
There is a backup bug in the latest release of Twrp. Switch to 4ext and your backups may work again. Someone posted on the n7 he could restore backups in Twrp from the previous version with the version he made them with but restoring backups on the latest version couldn't restore those
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
There is a backup bug in the latest release of Twrp. Switch to 4ext and your backups may work again. Someone posted on the n7 he could restore backups in Twrp from the previous version with the version he made them with but restoring backups on the latest version couldn't restore those
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
Thank you!
4ext is definitely the way to go on the Thunderbolt. Best recovery ever, wish the Gnex had it.
Sent from my Galaxy Nexus using xda app-developers app
The zip I was referring to, was the kernel zip you were trying to flash.
And if you have run my rom, you should know I suggest using 4ext recovery.
It's mentioned in all my rom OP's.
santod040 said:
The zip I was referring to, was the kernel zip you were trying to flash.
And if you have run my rom, you should know I suggest using 4ext recovery.
It's mentioned in all my rom OP's.
Click to expand...
Click to collapse
Ok thank you! I have switched to 4ext thank you for the refferal
Do you backups work now?
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
Do you backups work now?
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
No actually.. It's ok though. I don't mind starting over.. Thank you for your help! I am running leankernal now at 184mhz unlocked to see what kind of battery improvements it brings, if any.. With JellyBlur ROM.. Any sugesstion on a ROM?
lacoursiere18 said:
No actually.. It's ok though. I don't mind starting over.. Thank you for your help! I am running leankernal now at 184mhz unlocked to see what kind of battery improvements it brings, if any.. With JellyBlur ROM.. Any sugesstion on a ROM?
Click to expand...
Click to collapse
Good luck with the 184mhz, I can not use that on my phone, always does the deep sleep of death.... thats not a good thing.
As for a ROM, I always suggest one of Santod's ... really any of them lol
Milimbar said:
Good luck with the 184mhz, I can not use that on my phone, always does the deep sleep of death.... thats not a good thing.
As for a ROM, I always suggest one of Santod's ... really any of them lol
Click to expand...
Click to collapse
Dude so far no problems with 184mhz.. Speed is no issue, no lag, no reboots, but I'll have to put it through the 24hr test to fully see how it does. And I charge my battery to 100% when installed it, approx. 4hr 41mins with pretty much none stop usage.. at 72% now. On the old kernal I would have been dead..

[ROM]i545-VRUEMK2_Stock_Root_Deodex(12/22/13)

THIS IS ONLY FOR USERS ON MDK BOOTLOADER WITH CUSTOM RECOVERY (cwm or twrp)
NOT COMPATIBLE WITH SAFESTRAP. - however, jrkruse has built a MK2 rom with Aroma that allows installing without kernel.
THIS WILL NOT AFFECT BOOTLOADER OR MODEM AS THEY ARE NOT INCLUDED.
GENERAL DISCLAIMER : YOU ARE RESPONSIBLE FOR WHAT YOU DO TO YOUR PHONE!
This is a stock rom based off the MK2.tar that Surge1223 put together. Thank him every chance you get (without it this wouldn't be possible). It's rooted, deodexed and I've removed all of the Knox garbage. I've included Talexop's stock insecure kernel, Surge1223's tether mod and swgamez's reboot menu.
If you want to update to the latest modem, it can be found here - [MODEM][Zip] Modems for Loki'd & Safestrap roms
Features:
Talexop v1.3 kernel - which can be found here
Pre-Rooted
Deodexed
Zipaligned
Busybox
Surge1223's tether mod
swgamez 4-way reboot menu
To install:
Must be on SCH-i545 VZW S4
Must be on MDK bootloader and have custom recovery (cwm or twrp).
Wipe cache, dalvik cache and data. (If you choose to "dirty flash", don't bring up any problems here).
When rebooting from recovery, it will ask if you want to "Disable Recovery Flash". Always choose "NO".
Download:
I545VRUEMK2_STOCK_ROOT_DEODEX.zip
md5: ce8b7742bd80c445581e2894d1b7ea91
Thanks:
Surge1223 - for the .tar file and tether mod
Dsixda - for the kitchen (that makes it so much easier on us noobs)
talexop - for the awsome kernel
scrosler - for his great tutorial on building a rom from a .tar
djrbliss - for the loki method
ChainFire - for SuperSU
jrkruse - for the root method
MODS:
MK2_Blue_Circle_Batt-Switch-Toggles.zip
md5: a769dfe5b505c4bff6fd19eb6203c584
AOSP_Mms_for_MK2.zip - this includes an Mms.apk that I themed but you can swap it with any AOSP Mms, just copy it to /system/app/
md5: 14a3b59eb398d79463086480bea1142a
swgamez created these mods for MJ7 but they still work on MK2
SecMmms.apk (stock messaging app), ENABLE SPLIT-VIEW MODE ON/OFF TOGGLE, DISABLE THE SMS TO MMS AUTO-CONVERSION,
SMS 1000/UNLIMITED RECIPIENT LIMIT, INCREASE MMS MAX SIZE + INCREASE MMS IMAGE SIZE and MORE.
thanks swgamez
SecMms Super Mod
4x5-Laucher3+Transparent Weather Mod - thanks swgamez
Disabling Ascending Ringtone Mod - thanks swgamez
This one too just in case
Link?
scarmon25 said:
Link?
Click to expand...
Click to collapse
Sorry, wasn't quite finished.
Been waiting for this. Merry Christmas
Sent from my thumbs while using tapatalk 4
I've been curious about what it was like myself. Run CM daily but still always like to see what's new in the updates.
Thanks so much for putting this out. I've been waiting for an MK2 rom to fix issues with my car charger. Hopefully this does the trick!
Lagos3sgte said:
Thanks so much for putting this out. I've been waiting for an MK2 rom to fix issues with my car charger. Hopefully this does the trick!
Click to expand...
Click to collapse
I'm not sure this is still going to have that fix. I believe those changes were in the kernel and I'm using talexop's kernel. One of these days I'll be able to repack a stock kernel and get it to boot.
old&slow said:
I'm not sure this is still going to have that fix. I believe those changes were in the kernel and I'm using talexop's kernel. One of these days I'll be able to repack a stock kernel and get it to boot.
Click to expand...
Click to collapse
Oh no!
Whats the issue with getting the MK2 kernel to boot? Is it related to KNOX? I thought all 4.3 updates were KNOX patched, but all of that security had been cracked already as far as roms are concerned?
Lagos3sgte said:
Oh no!
Whats the issue with getting the MK2 kernel to boot? Is it related to KNOX? I thought all 4.3 updates were KNOX patched, but all of that security had been cracked already as far as roms are concerned?
Click to expand...
Click to collapse
Nah, it's not a knox thing....it's really just a noob thing. I'm not really a kernel guy but I'm learning. After trying several different methods of repacking after editing to make it insecure I just gave up on my own kernel and borrowed talexop's.
old&slow said:
Nah, it's not a knox thing....it's really just a noob thing. I'm not really a kernel guy but I'm learning. After trying several different methods of repacking after editing to make it insecure I just gave up on my own kernel and borrowed talexop's.
Click to expand...
Click to collapse
Ah I see.
Kind of odd that no one has released and MK2 based bone stock rom.
Lagos3sgte said:
Ah I see.
Kind of odd that no one has released and MK2 based bone stock rom.
Click to expand...
Click to collapse
Well jrkruse did build a nice MK2 rom with Aroma which is a little beyond my talent level.
Thanks for your hard work
swgamez said:
Thanks for your hard work
Click to expand...
Click to collapse
No problem at all. Thanks for the reboot menu.:highfive:
old&slow said:
Well jrkruse did build a nice MK2 rom with Aroma which is a little beyond my talent level.
Click to expand...
Click to collapse
Thanks a lot for the tip! Will give it a shot!
ooooh nice! I'm on your MJ7 build, and it's running great. Can't decide if I want to wipe and install this right now. Anyone know what verizon fixed in MK2 over MJ7?
trmiv said:
ooooh nice! I'm on your MJ7 build, and it's running great. Can't decide if I want to wipe and install this right now. Anyone know what verizon fixed in MK2 over MJ7?
Click to expand...
Click to collapse
I read somewhere better battery life or better stand by idle
Sent from my SCH-I545 using Tapatalk 2
How are you guys liking the Rom?
Good so far. One thing I notice. My home button is not waking up my phone or lagging severely
Sent from my SCH-I545 using Tapatalk 2

[Q] NAB vs NH7

I'm sure that this topic has been covered before but I cant find any clear cut answers. My Baseband is N900PVPUCNAB. It seems like certain ROMs with NH7 will not work for me and this is most likely the issue. (I have been changing ROMs since January but now this no MMS thing is really messing me up. Upon flashing a new ROM sms and mms work usually out of the gate but then the next day I have issues and I have to reboot to get my messages.) If anybody can help me so that I can either only flash the right ROM or change the baseband to the most current(is that possible?) I would truly appreciate it. Thanks
P.S. I have been using CM based ROMs and PAC ROMs because they seem to avoid this problem but I really just want a stock(stock-ish ROM)
supanatuwral said:
I'm sure that this topic has been covered before but I cant find any clear cut answers. My Baseband is N900PVPUCNAB. It seems like certain ROMs with NH7 will not work for me and this is most likely the issue. (I have been changing ROMs since January but now this no MMS thing is really messing me up. Upon flashing a new ROM sms and mms work usually out of the gate but then the next day I have issues and I have to reboot to get my messages.) If anybody can help me so that I can either only flash the right ROM or change the baseband to the most current(is that possible?) I would truly appreciate it. Thanks
P.S. I have been using CM based ROMs and PAC ROMs because they seem to avoid this problem but I really just want a stock(stock-ish ROM)
Click to expand...
Click to collapse
Here are the version additions, http://support.sprint.com/support/a...ndUpdateTheSoftwareVersionOnYourSamsungGalaxy
I used this to get to NH7 stock - follow the instructions there
http://forum.xda-developers.com/showthread.php?t=2712205
Then to root (after you let NH7 stock boot fully)
copy supersu216.zip to your cd card (http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133)
Odin Philz Recovery to your phone (link in my signature) - don't let it reboot the phone - once it flashes and passes - hold the boot to recovery buttons (vol up + home + power)
then flash the supersu zip
reboot to system ans you're at stock rooted, you can then flash the newer roms that require the newest boot loader and baseband (modem)
you might want to open SuperSU app to see if binaries need updating.
I hope that helps
Thank you sir, I will do this tonight. One question, I can go straight to NH7 right? Is there a need for NC5?
supanatuwral said:
Thank you sir, I will do this tonight. One question, I can go straight to NH7 right? Is there a need for NC5?
Click to expand...
Click to collapse
My pleasure and right you can go right to it.
supanatuwral said:
Thank you sir, I will do this tonight. One question, I can go straight to NH7 right? Is there a need for NC5?
Click to expand...
Click to collapse
Yes +1 with jdelano , here is some more info http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 Enjoy !!!

Stock_Verizon_I545VRUFNK1_4.4.2_For_MDK_BootLoader

Here is the latest Verizon Rom it is a deodexed fully stock rooted rom with busybox and with knox removed. Talexop Stock 4.4.2 TW Kernel. Everything else is totally stock.
Download
I545VRUFNK1.zip
Mirror
XDA:DevDB Information
Verizon_TW_4.4.2_NK1, ROM for the Verizon Samsung Galaxy S 4
Contributors
jrkruse
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2014-12-09
Last Updated 2014-12-08
Mods For NK1
Extended reboot and disable cd installer mod by @old&slow.
NK1_Ext_Reboot_MTP.zip
And I was just thinking when you would release this. I'll switch to it once downloaded. Thanx man
Everything is working. It's nice to get back to a vzw build. You are appreciated @jrkruse !!
Is this rooted? Am I foolish for asking?
glicholas said:
Is this rooted? Am I foolish for asking?
Click to expand...
Click to collapse
Yes it is
@old&slow made a extended power menu mod. I posted it in post #2
Very nice. Thank you. How difficult is it for me to make this into an Odin flashable TAR file? I'd love to have a stock image, prerooted that I can use to flash back when I soft brick my phone. lol
Thanks, Jkruse. It's really nice of you to come back and share things like this and the ROM patch work even though you're on an S5 yourself. Thank you!!
LGtMgG2t said:
Very nice. Thank you. How difficult is it for me to make this into an Odin flashable TAR file? I'd love to have a stock image, prerooted that I can use to flash back when I soft brick my phone. lol
Click to expand...
Click to collapse
Well I would love to but there is this little thing called a locked bootloader that prevents that
Ive been using this for about a week due to bluetooth being flaky on CM11. Bluetooth works awesome, but my battery life has greatly suffered. I would sleep would 30% battery and wake up with battery dead. where as with CM11 I would wake up around 10-20%. any ideas?
jareddlc said:
Ive been using this for about a week due to bluetooth being flaky on CM11. Bluetooth works awesome, but my battery life has greatly suffered. I would sleep would 30% battery and wake up with battery dead. where as with CM11 I would wake up around 10-20%. any ideas?
Click to expand...
Click to collapse
Since your on MDK try flashing Adam v2.3 kernel or AEL v4.6. Just remember to flash Loki zip after installing kernel. I've had really good battery life with both kernels. Haven't tried this build yet but its still 4.4.2 based.
jareddlc said:
Ive been using this for about a week due to bluetooth being flaky on CM11. Bluetooth works awesome, but my battery life has greatly suffered. I would sleep would 30% battery and wake up with battery dead. where as with CM11 I would wake up around 10-20%. any ideas?
Click to expand...
Click to collapse
That is odd. Did you check wakelocks to see if you have a particular app or process that is eating up your battery?
Just noticed you said you've been using this a week. It's only released two days ago. Are you talking about another ROM?
Super stable, fast and perfect. Sometimes a bone stock rom with root access really is the best thing.
This is exactly what I was looking for. Where can I find the instructions on how to install it? I'm currently on I545VRUFNC5 with root and safestrap 3.72. Can I upgrade to NK1 directly without wiping my data? I upgraded from NC2 to NC5 root this way and had great experience. I hope I can do it again on upgrading to NK1. Xda-developers rocks!
Just curious - what's the benefit to using this? I mean, I am genuinely curious what the draw is. If you are lucky enough to have one of the MDK S4 phones, then why use a stock/Verizon rom?
I might flash it, just want to know what the advantages are. One person said "it's nice to get back to a Verizon ROM" but all the Verizon ROMs I've had have been awful.
Thanks for the ROM jrkruse.....
I wanted to know if there was a preferred modem to use with this ROM. I am on MDK and currently using the MJ7 modem.
gruvylou said:
Thanks for the ROM jrkruse.....
I wanted to know if there was a preferred modem to use with this ROM. I am on MDK and currently using the MJ7 modem.
Click to expand...
Click to collapse
Pretty sure I remember this installing the NK1 modem when flashing the ROM.
Tether
How do I unlock tether on NK1?
heath2805 said:
Pretty sure I remember this installing the NK1 modem when flashing the ROM.
Click to expand...
Click to collapse
I haven't flashed this, but Jkruse has never included a modem in his ROM releases before, and I would expect this one to follow that pattern, does not flash modem.
---------- Post added at 08:22 AM ---------- Previous post was at 08:21 AM ----------
gruvylou said:
Thanks for the ROM jrkruse.....
I wanted to know if there was a preferred modem to use with this ROM. I am on MDK and currently using the MJ7 modem.
Click to expand...
Click to collapse
I'd flash the most recent NK1 modem and see how it goes. I'm using out without issues.
---------- Post added at 08:23 AM ---------- Previous post was at 08:22 AM ----------
JacRyan said:
How do I unlock tether on NK1?
Click to expand...
Click to collapse
Are you saying tether is not working?

[ROM][STOCK][30A - 5.0.2] Stock rooted Lollipop Rom for Int. G Pad by skin1980

Hi guys, this is the latest Lollipop ROM rolled out by LG for the international G Pad 8.3.
It's the corean update but works just fine with mine and i hope also with your.
INFO:
1- You can flash it with the TWRP like every Rom out here, i used the bumped TWRP in the original devs thread;
2- The kernel is stock, i only set selinux to permissive because in my works for the G3 i've seen that it's the only way to avoid permission issues;
3- it's bumped so doesn't need nothing special, just flash it in TWRP like i said above;
4- You can dirty flash over the stock 4.4.2 ROM, i made it and had no issues at all.
5- If you are asking why you should flash this instead of the kdz, the answer is that with the "kdz way" you will upload your Bootloader too and you will lost the possibility to flash the twrp and any custom kernel since the new BL patch the exploit used by Bump.
DOWNLOAD
https://www.androidfilehost.com/?fid=95916177934553953
ROOT:
The rom is unrooted, to root it just flash this in recovery:
http://download.chainfire.eu/supersu
Credits:
- Team Codefire for the Bump exploit;
- Chainfire for the root stuff;
reserved
Thanks very much once again ?
Flashed this and everything seems ok so far. Supersu didnt work for me in the first flash with ROM, but when i got back into recovery the second flash worked. Root seems to be pretty strong thus far. I am going to run this for the next few days and see how stock Lollipop is working. Thanks again for this!
Ran for a couple minutes and noticed vibration doesn't work. Do I need to enable something? Pretty solid so far!
Edit: You have to reboot for vibration
Looking great for me so far ,no issues,though I have a lot of setting up to do still ?
Hello,
Very good rom
bye bye kit kat and external sd storage problems
Thank you very much for this rom
Fantastic! Thanks for the work and sharing.
Just flashed it dirty and seems to work flawless.
Major improvements over 4.4 are the "recents apps" button and being able to switch user without having to use hard power button.
Thank you for sharing this!
Can anybody answer me what's with battery, is it worse than on KitKat? And is gamma fixed?
Thank you one again! Cheers!
Sweet! Downloading right now, thank you!!
dirty flashed over a fresh 4.4.2 with SU. wiped cache/dalvik . Rebooted and my tablets a lot more Korean than I usually like it. did i do something wrong?
nvrmnd.... blindly stabing at the language tab worked.
fazbender said:
dirty flashed over a fresh 4.4.2 with SU. wiped cache/dalvik . Rebooted and my tablets a lot more Korean than I usually like it. did i do something wrong?
nvrmnd.... blindly stabing at the language tab worked.
Click to expand...
Click to collapse
Ok then
is it OK to flash over aosp 5.1? (with full wipes of course)
antitolg said:
is it OK to flash over aosp 5.1? (with full wipes of course)
Click to expand...
Click to collapse
i think so, just take a backup in case something go wrong
antitolg said:
is it OK to flash over aosp 5.1? (with full wipes of course)
Click to expand...
Click to collapse
I did. Full wipe worked fine.
Only issue I've noticed so far is the lockscreen weather doesn't seem to work.
I set it up as you would with the g3 but no luck.
Anyone managed to get it working?
For reference, I started with a completely wiped /formated tablet.
Hey dev, when you say 'dirt flash' you mean I have to wipe nothing? Just like if it is an OTA? Do I lose something?
rom is running very smooth so far without any problems, living in germany. much faster as KK relase.
thank you dev!
Skin yoy are awsome!
Glad to see you here to.. Lg g3 owner mate congrats and keep doing your thing.... Thanks once again you great developer!!!!
renatohm said:
Hey dev, when you say 'dirt flash' you mean I have to wipe nothing? Just like if it is an OTA? Do I lose something?
Click to expand...
Click to collapse
Yes.. Thats what i mean. But if you are on aosp rom you must wipe.
And with dirty flash you will not lose anything
Sent from my SM-N910F using XDA Free mobile app

Categories

Resources