Hi guys, this is the latest Lollipop ROM rolled out by LG for the international G Pad 8.3.
It's the corean update but works just fine with mine and i hope also with your.
INFO:
1- You can flash it with the TWRP like every Rom out here, i used the bumped TWRP in the original devs thread;
2- The kernel is stock, i only set selinux to permissive because in my works for the G3 i've seen that it's the only way to avoid permission issues;
3- it's bumped so doesn't need nothing special, just flash it in TWRP like i said above;
4- You can dirty flash over the stock 4.4.2 ROM, i made it and had no issues at all.
5- If you are asking why you should flash this instead of the kdz, the answer is that with the "kdz way" you will upload your Bootloader too and you will lost the possibility to flash the twrp and any custom kernel since the new BL patch the exploit used by Bump.
DOWNLOAD
https://www.androidfilehost.com/?fid=95916177934553953
ROOT:
The rom is unrooted, to root it just flash this in recovery:
http://download.chainfire.eu/supersu
Credits:
- Team Codefire for the Bump exploit;
- Chainfire for the root stuff;
reserved
Thanks very much once again ?
Flashed this and everything seems ok so far. Supersu didnt work for me in the first flash with ROM, but when i got back into recovery the second flash worked. Root seems to be pretty strong thus far. I am going to run this for the next few days and see how stock Lollipop is working. Thanks again for this!
Ran for a couple minutes and noticed vibration doesn't work. Do I need to enable something? Pretty solid so far!
Edit: You have to reboot for vibration
Looking great for me so far ,no issues,though I have a lot of setting up to do still ?
Hello,
Very good rom
bye bye kit kat and external sd storage problems
Thank you very much for this rom
Fantastic! Thanks for the work and sharing.
Just flashed it dirty and seems to work flawless.
Major improvements over 4.4 are the "recents apps" button and being able to switch user without having to use hard power button.
Thank you for sharing this!
Can anybody answer me what's with battery, is it worse than on KitKat? And is gamma fixed?
Thank you one again! Cheers!
Sweet! Downloading right now, thank you!!
dirty flashed over a fresh 4.4.2 with SU. wiped cache/dalvik . Rebooted and my tablets a lot more Korean than I usually like it. did i do something wrong?
nvrmnd.... blindly stabing at the language tab worked.
fazbender said:
dirty flashed over a fresh 4.4.2 with SU. wiped cache/dalvik . Rebooted and my tablets a lot more Korean than I usually like it. did i do something wrong?
nvrmnd.... blindly stabing at the language tab worked.
Click to expand...
Click to collapse
Ok then
is it OK to flash over aosp 5.1? (with full wipes of course)
antitolg said:
is it OK to flash over aosp 5.1? (with full wipes of course)
Click to expand...
Click to collapse
i think so, just take a backup in case something go wrong
antitolg said:
is it OK to flash over aosp 5.1? (with full wipes of course)
Click to expand...
Click to collapse
I did. Full wipe worked fine.
Only issue I've noticed so far is the lockscreen weather doesn't seem to work.
I set it up as you would with the g3 but no luck.
Anyone managed to get it working?
For reference, I started with a completely wiped /formated tablet.
Hey dev, when you say 'dirt flash' you mean I have to wipe nothing? Just like if it is an OTA? Do I lose something?
rom is running very smooth so far without any problems, living in germany. much faster as KK relase.
thank you dev!
Skin yoy are awsome!
Glad to see you here to.. Lg g3 owner mate congrats and keep doing your thing.... Thanks once again you great developer!!!!
renatohm said:
Hey dev, when you say 'dirt flash' you mean I have to wipe nothing? Just like if it is an OTA? Do I lose something?
Click to expand...
Click to collapse
Yes.. Thats what i mean. But if you are on aosp rom you must wipe.
And with dirty flash you will not lose anything
Sent from my SM-N910F using XDA Free mobile app
Related
Q&A for [ROM][LB/UB]Envi-Rom Stock+
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][LB/UB]Envi-Rom Stock+. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
If coming from existenz with unlocked boot loader can I just wipe and flash and still have root and recovery?
bikenerd101 said:
If coming from existenz with unlocked boot loader can I just wipe and flash and still have root and recovery?
Click to expand...
Click to collapse
Yes if you follow the installation steps correctly !
To avoid bootloops and that kind of jokes.
bikenerd101 said:
If coming from existenz with unlocked boot loader can I just wipe and flash and still have root and recovery?
Click to expand...
Click to collapse
Root is a system thing, my rom is Pre-Rooted (sometimes fails)
Recovery, this depends on how you installed Recovery, you may have to reinstall the Nut's Dual Recovery if you used that
wipe Cache and Dalvik when installing, nothing else is needed to be wiped, if you bootloop then wipe data
Hi Envious. Thanks for all the hard work and contributions.
I have. 314 stock rooted on D6903 n SGP521. I'm sure D6903 will work flawlessly with your rom. If I want to flash it on SGP521, any considerations or it can't be done?
fribriz said:
Hi Envious. Thanks for all the hard work and contributions.
I have. 314 stock rooted on D6903 n SGP521. I'm sure D6903 will work flawlessly with your rom. If I want to flash it on SGP521, any considerations or it can't be done?
Click to expand...
Click to collapse
this Rom will only Work on D6503 and D6502, no other devices at this current point in time
Apologies. My device is D6503 . Must be the early morning commute that muddled my reply. So it won't work on SGP521. Thank you.
Rom on D6502
Hi. Can i flashed this Rom on D6502 model?
FanFM said:
Hi. Can i flashed this Rom on D6502 model?
Click to expand...
Click to collapse
If you can find a modem flashable zip for D6502 then flash that after flashing this rom
If not then this rom will only work on D6503 model
flash ligt
Hello the of torgeincrease /flash light,how it works?
Best Sebastian
I cannot install Xposed on the ROM, I installed a root checker app and it says I have root but no apps with root access can mount system as writable. And I tried flashing an app to system (Cerberus app) via recovery and it's not installed.
How to I check if I have a full working root?
lywyn said:
I cannot install Xposed on the ROM, I installed a root checker app and it says I have root but no apps with root access can mount system as writable. And I tried flashing an app to system (Cerberus app) via recovery and it's not installed.
How to I check if I have a full working root?
Click to expand...
Click to collapse
Not sure, i recoment reflashing root after flashing this rom, it seems to fail to work by its self
Envious_Data said:
Not sure, i recoment reflashing root after flashing this rom, it seems to fail to work by its self
Click to expand...
Click to collapse
Done that with plain CWM (via NDR utils). Titanium Backup works but Xposed fails to mount. That said Titanium will only do certain things, it cannot remove system apps which may be mounting issue. I'm on V1PRE2
---------- Post added at 11:19 AM ---------- Previous post was at 10:47 AM ----------
lywyn said:
I cannot install Xposed on the ROM, I installed a root checker app and it says I have root but no apps with root access can mount system as writable. And I tried flashing an app to system (Cerberus app) via recovery and it's not installed.
How to I check if I have a full working root?
Click to expand...
Click to collapse
SONY RIC killer solved it. Was mention in one of the Envi ROM threads. ROM working great now, hats off for the speed and smoothness it brilliant!
Im on 4.4.4 stock, so what i have to do to install this rom. I have done nothing, its completely stock. I havent unlcoked any bootloaders or done anything.
EDIT: i get bootloop, when i flash .314 , but when i revert flash to .167 everythings allright.
i can confirm that after instaling V1 version whitch is 3.12 based ,the battery drain is normal and actualy better than .167...the only think that bothers me is the update notification anythinig else is smooth and silky.i had 98 percent battery and i played 2-3 hours of fruit ninja and made some calls and was surfing the internet with wifi connected and after 22 hours of on battery i have 63 percent remaining so i can say that battery drain is not a issue for me...also im using this rom now for 5 days since is released and its very good.i think that ppl should use rom atleast for few days and than see if battery drain is happening..as i know the battery has to be calibrated after instaling fresh rom. cheers guys
cocagenda2 said:
i can confirm that after instaling V1 version whitch is 3.12 based ,the battery drain is normal and actualy better than .167...the only think that bothers me is the update notification anythinig else is smooth and silky.i had 98 percent battery and i played 2-3 hours of fruit ninja and made some calls and was surfing the internet with wifi connected and after 22 hours of on battery i have 63 percent remaining so i can say that battery drain is not a issue for me...also im using this rom now for 5 days since is released and its very good.i think that ppl should use rom atleast for few days and than see if battery drain is happening..as i know the battery has to be calibrated after instaling fresh rom. cheers guys
Click to expand...
Click to collapse
As said it depends on your region/mobile carrier
i installed V1PRE-RELEASE but i miss the FM radio. is there any original Xperia FM radio app or flashable (to flash in recovery) that works under V1PRE-RELEASE ?
What does "removed Viper4Android libs " mean in the changelog of V2? I have Viper4Android installed since V1 will flashing V2.2 affect the app whatsoever? Thanks and great rom btw keep up the good work!
Avaensis said:
What does "removed Viper4Android libs " mean in the changelog of V2? I have Viper4Android installed since V1 will flashing V2.2 affect the app whatsoever? Thanks and great rom btw keep up the good work!
Click to expand...
Click to collapse
You have 3 options when you install viperfx4android so i removed the Libs n binarys n all for ViperFX so you can choose what install you want to use
Battery savng, etc, etc etc etc
fastest stock based rom
well the title says it all...i have used this rom for many times even the older versions and as far as i know i can confirm that even after few weeks usage the rom is stable and fluid...actualy i can say ,that is definetly as fast as the aosp , becouse i tryed every rom possible for z2 and yes this one is really the best at speed and stability compairing to stock rom or other custom ones .and also im very alergic to lags and stuff like that so yea i know when i say fast its fast
Whoohoo!! We beat the actual update. :good: HUGE Thanks to @autoprime for the files!!!
They seem to have fixed a lot of the bugs we had in ZV4. Actually runs really well. They've also added a couple new things. (Data optimizer, for one)
This is the Stock ZV6. Odexed and Deodexed. Anyone can use this as a base. Just give credit.
What is has:
Bone stock - installs modem, kernel and ROM
Root
Busybox
Zipaligned
Install:
In TWRP, select "Wipe" "Advanced", and select all but int and ext SD. So wipe /system, /data, /cache, and /dalvic.
Flash Rom
On setup, it happens fast. Take your time or you'll end up selecting something you don't want.
Update profile/prl
Profit!!!
Bugs:
None that I have found. You tell me?
Downloads:
Stock ZV6 Odexed
Stock ZV6 Deodexed
Modem/Radio - Flashable zips: - They are interchangeable on either KK. Update profile/prl,then Activate phone. Then go to Settings>More>Mobile Networks and change it to ANYTHING BUT GLOBAL.
ZV6
ZV4
Kernels
Bone Stock_ZV6
Initd_Stock_ZV6
Flashable_init.d_ZV6_MultiRom - This will run before or after MultiRom. So you can flash this, and when you're ready for MultiRom, just flash files #1 and #3 from that thread
Flashable APN's
Flashable_Vanir_APN - If you do a Factory or dialer reset, your phone will not provision. You will need to revert to the stock APN first.
Stock_APN
Hell yea! Thank you!
Thanks @engine95 love your work. Cant wait to try this out
If I flash this, & reinstall bump twrp can we still play around with the cm roms that are out? And thank you for this sir. Damn fast you are!
Sent from my LG-ls990 using Xparent Green Tapatalk 2
Installed with the rin 1.8 kernel and your extreme mixer paths. Working great. Thank you!
aheeejd said:
If I flash this, & reinstall bump twrp can we still play around with the cm roms that are out? And thank you for this sir. Damn fast you are!
Sent from my LG-ls990 using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Short answer is yes. Or maybe i should say, "I think so".
I'm really not sure if reinstalling TWRP will fix that 5sec delay in startup of TWRP we get now. I'm assuming it does. But it's not necessary. It seems to be working fine.
Deodex uploading now.
I hope this update fixes the auxiliary port issue. Thanks for the upload.
Deodexed is up in OP.
BTW
The 5sec delay in TWRP, might be caused by the kernel. I don't know if autoprime "Bumped" it before uploading. And Bump is throwing errors when I try.
The kernel and ROM are working just fine. I'll upload the kernel if this is the issue.
OK so if I flash this, this should update the kernel and modem right? So I go back to my nandroid..which is sacs...will the modem and kernel still stick?... I did all this already but just curious lol
wojo797 said:
OK so if I flash this, this should update the kernel and modem right? So I go back to my nandroid..which is sacs...will the modem and kernel still stick?... I did all this already but just curious lol
Click to expand...
Click to collapse
The modem will stick. The kernel won't unless you uncheck restore boot. Then it SHOULD stick. The date on the new Kernel is Nov 7.
Any idea if pulling just the modem out and flashing it alone will get the gps/compass
fixed for those of us running AOSP builds?
Can this be flashed over my current setup?
treezy26 said:
Can this be flashed over my current setup?
Click to expand...
Click to collapse
I flashed over by previous stock just fine. You should be okay going from stock < stock since its just an update, but if you get any fc errors you might want to wipe and do a clean install.
On a side note I haven't had aux issues yet so this may have fixed it.
engine95 said:
The 5sec delay in TWRP, might be caused by the kernel. I don't know if autoprime "Bumped" it before uploading. And Bump is throwing errors when I try.
The kernel and ROM are working just fine. I'll upload the kernel if this is the issue.
Click to expand...
Click to collapse
you don't bump stock boot.imgs.. they're already signed by LG. bump is only for custom boot.img's
as for the TWRP delay.. no clue. there is no difference in how bump works with the bootloader between zv4 and zv6.
I honestly didn't question that because I didn't know if ZV6 came with a new bootloader that looked for a new sig
RandomPooka said:
Any idea if pulling just the modem out and flashing it alone will get the gps/compass
fixed for those of us running AOSP builds?
Click to expand...
Click to collapse
It might. autoprime had it here. http://forum.xda-developers.com/showthread.php?p=56927992
Ok. I flashed this last night. I had zero issues. No twrp delay either. Clean 3plus wipe all but int and sd ext. So i then ran it til few minutes ago. I just restored my sacs v2. Backup. So far as i already fugured no issue. Thanks all. And engine95 i might like to run a rom off of your zv6..autoprime again thanks. Both. To the unknown finder..thanks
Sent from rotary technology Phone
---------- Post added at 08:36 PM ---------- Previous post was at 08:35 PM ----------
Ok. I forgot one thing. Xda app. My pro or free i could not get to reach server. Lol. Prob on my end. No worries.
Sent from rotary technology Phone
Flashed over stock rooted with no problems. Running good, thanks.
Love it, thanks engine! Quick question, after a couple reboots....My phone got pushed all the sprint bloatware! How did they manage that? and is there a way to undo it?
ver151set said:
Love it, thanks engine! Quick question, after a couple reboots....My phone got pushed all the sprint bloatware! How did they manage that? and is there a way to undo it?
Click to expand...
Click to collapse
Much of Sprint crap can be removed within 'manage apps'. The rest through a file explorer. There's a few threads here on what's safe to remove.
Hi everybody. I've been using my i9100 for a few months so far, rooted but without recovery.
I need to flash some files now and i don't know what to flash for having cwm or any other kind of updated recovery.
Can you suggest me what to choose?
i've found PhilZ-cwm6-XWLSW-OXX-5.15.0-signed.zip, which seems to be the perfect choice but i'm afraid it won't support kitkat rom (and also i'm afraid it'll break my current rom by changing my kernel and taking me back to old superuser binaries.
Hope you'll help me, thank you so much in advance :victory: :highfive:
slimhunter said:
Hi everybody. I've been using my i9100 for a few months so far, rooted but without recovery.
I need to flash some files now and i don't know what to flash for having cwm or any other kind of updated recovery.
Can you suggest me what to choose?
i've found PhilZ-cwm6-XWLSW-OXX-5.15.0-signed.zip, which seems to be the perfect choice but i'm afraid it won't support kitkat rom (and also i'm afraid it'll break my current rom by changing my kernel and taking me back to old superuser binaries.
Hope you'll help me, thank you so much in advance :victory: :highfive:
Click to expand...
Click to collapse
The zip you mentioned is for jelly bean, not kitkat. Here is the correct one for kitkat: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9100/. Don't worry about superuser, you can always update the binaries (through supersu).
wonderful, flashed and it's working (i thanked you with the button as well)
just some more tips if you can: what are the best improvements that you would flash on the stock rom via cwm? thank you
slimhunter said:
wonderful, flashed and it's working (i thanked you with the button as well)
just some more tips if you can: what are the best improvements that you would flash on the stock rom via cwm? thank you
Click to expand...
Click to collapse
Stock rom is pretty awkward, I personally recommend flashing SlimSaber + DorimanX for best stability, performance and battery.
Good afternoon
I am on verizon and I just flashed back to KK from LP I am on 12B. I just Rooted with the LG one click root. I also downloaded Flashify.
I want to get TWRP for the G3, Where do I go to Get TWRP for verizon? There is the TWRP Manager app I downloaded but Uninstalled because it wanted fix a partition so it can write to the SD card. I said no then uninstalled it.
Should I redownload the App and let it fix or do something different? It has been awhile since I rooted and ROM'd want to get back into it.
the last time I rooted and Rom'd was in 2009 when I had my thunderbolt
thanks again for the information
Chris
You are fine with letting it do the fix. Be sure to get the vs985 version of twrp
Sent from my VS985 4G
MORANDCHI said:
Good afternoon
I am on verizon and I just flashed back to KK from LP I am on 12B. I just Rooted with the LG one click root. I also downloaded Flashify.
I want to get TWRP for the G3, Where do I go to Get TWRP for verizon? There is the TWRP Manager app I downloaded but Uninstalled because it wanted fix a partition so it can write to the SD card. I said no then uninstalled it.
Should I redownload the App and let it fix or do something different? It has been awhile since I rooted and ROM'd want to get back into it.
the last time I rooted and Rom'd was in 2009 when I had my thunderbolt
thanks again for the information
Chris
Click to expand...
Click to collapse
If you don't trust the app, you can do it yourself using http://forum.xda-developers.com/showthread.php?t=2317790
Download the latest TWRP here:
https://dl.twrp.me/vs985/
sirkevinus said:
If you don't trust the app, you can do it yourself using http://forum.xda-developers.com/showthread.php?t=2317790
Download the latest TWRP here:
https://dl.twrp.me/vs985/
Click to expand...
Click to collapse
thanks for the Information, did it last night and everything is good. Made a Nadroid backup.. Now the hard part is trying to figure out what ROM to flash to
Was looking at skydragon or Resurrection.. Choices Choices Choices
thanks again
Chris
Latest TWRP is here (v2.8.6.1). Just flash the file in recovery.
Try both ROMs and a couple others, too! I suggest starting with a stock-based ROM, getting a feel for the difference (smaller delta), then moving to an AOSP/CM-based ROM.
epidenimus said:
Latest TWRP is here (v2.8.6.1). Just flash the file in recovery.
Try both ROMs and a couple others, too! I suggest starting with a stock-based ROM, getting a feel for the difference (smaller delta), then moving to an AOSP/CM-based ROM.[/QUOTE
I just installed Liquidsmooth ROM for the LG G3 on VZW. I flashed it and now it keeps poping up google play services has stopped. How do I get it to work so I can sign in and download my google stuff?
thanks alot
Chris
Click to expand...
Click to collapse
MORANDCHI said:
epidenimus said:
Latest TWRP is here (v2.8.6.1). Just flash the file in recovery.
Try both ROMs and a couple others, too! I suggest starting with a stock-based ROM, getting a feel for the difference (smaller delta), then moving to an AOSP/CM-based ROM.[/QUOTE
I just installed Liquidsmooth ROM for the LG G3 on VZW. I flashed it and now it keeps poping up google play services has stopped. How do I get it to work so I can sign in and download my google stuff?
thanks alot
Chris
Click to expand...
Click to collapse
Did you flash the gapps with the rom.? I'm guessing that is a lollipop rom so you need the lollipop gapps to go with. There should be a link for the gapps in the same thread as you got the rom.
Sent from my VS985 4G using XDA Free mobile app
Click to expand...
Click to collapse
Make sure that you wiped properly (including System and Data partitions, as well as the caches) in TWRP.
After that, make sure that you installed the Gapps and the correct version of them for the ROM. I like these packages.
Thank you all for the info, I wiped and flashed the rom with the right gapps.
Chris
so I got this galaxy s5 (free) to replace the S4 I had.. I'm on AT&T and the S5 is a T-Mobile device.. I unlocked and am currently using on AT&T without any issues.. I tried Cyanogenmod 12 on it.. had way too many Bluetooth music issues.. so I switched back to a rooted t-mobile stock.. which is terrible.. bluetooth music works great but everything is is painfully slow.. so I want to find a good fast custom rom (that also has proper bluetooth music support).. With so many device versions and so many custom roms I'm just a bit perplexed.. I found some that are debloated stock roms which seem like that would be good. but I'm just a bit confused on what parts I need to have as "t-mobile g900t" and which parts I don't have to have that way? so yeah this is a bit of a newbie question (even though I have run 4 or 5 custom roms in the past (original galaxy s and my s4 both had custom roms). .but those were always at&t devices on at&t network.. so was an easier choice..
at any rate.. looking for some tips on how to best find the right rom.. Would love to do this today/tomorrow.. avoid messing with the phone during the work week..
Thanks in advance!!
Gary
Try the latest stock ROM for the phone. Many of us were having issues with lag with prior 5.1.1 ROMS. The latest ROM has fixed all these issues. Very snappy.
i feel like i remember seeing bluetooth/audio fixes & updates in the CM13 nightly changelogs, you also didnt specify which CM 12 you installed... the last 12.1 snapshot from october or the last nightly from december?
You can run whatever rom you want. If it works with KLTE it works on your phone. Check the S5 unified development. Cyanogen has always been crap on this phone, probably always will be. Try an AOSP based one like Tesla or TipsyOS (probably won't find them on this site, they post all of their roms on their Google+ page)
Unfortunately the only Marshmallow available for this phone so far is CM-13 based so it's also crap and full of bugs...
To be honest, no ROM you find will be perfect. The most stable thing I've found is to just use a rooted stock ROM and debloat the hell out of it then run Google Now launcher or Nova and forget that you have a Samsung device for a while, until the next OTA comes out and you have to do the process over again.
Sean89us said:
You can run whatever rom you want. If it works with KLTE it works on your phone. Check the S5 unified development. Cyanogen has always been crap on this phone, probably always will be. Try an AOSP based one like Tesla or TipsyOS (probably won't find them on this site, they post all of their roms on their Google+ page)
Unfortunately the only Marshmallow available for this phone so far is CM-13 based so it's also crap and full of bugs...
To be honest, no ROM you find will be perfect. The most stable thing I've found is to just use a rooted stock ROM and debloat the hell out of it then run Google Now launcher or Nova and forget that you have a Samsung device for a while, until the next OTA comes out and you have to do the process over again.
Click to expand...
Click to collapse
much improved deep sleep battery means crap & full of bugs? i'm over a week behind on nightlies & there arent that many bugs... http://www.cmxlog.com/13/klte/ things are improving all the time, only CM 12.1 is stuck... but the last december nightly isnt buggy either
Sort of forgot about this thread. first Thanks for the replies.. So I have been using CM13 since I posted this.. and this has great for speed.. but BlueTooth continues to suck.. no matter what bluetooth device I use with this Rom it skips and stutters. I've finally had enough.. it's been quite a long time with this issue so time for me to switch.. I will try one of the rooted stock roms and debloat it with one of those tools.. thanks again everyone!
gpinkham said:
Sort of forgot about this thread. first Thanks for the replies.. So I have been using CM13 since I posted this.. and this has great for speed.. but BlueTooth continues to suck.. no matter what bluetooth device I use with this Rom it skips and stutters. I've finally had enough.. it's been quite a long time with this issue so time for me to switch.. I will try one of the rooted stock roms and debloat it with one of those tools.. thanks again everyone!
Click to expand...
Click to collapse
Go to the international s5 site look at Tamirda's phoenix rom . It's 6.0.1 mm very snappy very few bugs. Very moddable. Just load a stock mm rom from here first than so you have the proper bootloader and modem. After installing you feel like you got a mini s7. Good good.
Sean89us said:
You can run whatever rom you want. If it works with KLTE it works on your phone. Check the S5 unified development. Cyanogen has always been crap on this phone, probably always will be. Try an AOSP based one like Tesla or TipsyOS (probably won't find them on this site, they post all of their roms on their Google+ page)
Unfortunately the only Marshmallow available for this phone so far is CM-13 based so it's also crap and full of bugs...
To be honest, no ROM you find will be perfect. The most stable thing I've found is to just use a rooted stock ROM and debloat the hell out of it then run Google Now launcher or Nova and forget that you have a Samsung device for a while, until the next OTA comes out and you have to do the process over again.
Click to expand...
Click to collapse
Sent from my SM-G935F using XDA-Developers mobile app
inspired55 said:
Go to the international s5 site look at Tamirda's phoenix rom . It's 6.0.1 mm very snappy very few bugs. Very moddable. Just load a stock mm rom from here first than so you have the proper bootloader and modem. After installing you feel like you got a mini s7. Good good.
Click to expand...
Click to collapse
Question.. I currently have CM13 loaded in this phone.. so do I still need to do the "Just load a stock mm rom" first? I assumed I already had the proper bootloader and modem..
thanks!
gpinkham said:
Question.. I currently have CM13 loaded in this phone.. so do I still need to do the "Just load a stock mm rom" first? I assumed I already had the proper bootloader and modem..
thanks!
Click to expand...
Click to collapse
If you have the mm bootloader and modem installed just wipe and flash. But I believe cm 13 could be ran on the lp bootloader. I odined the stock tar first that way you know all the partitions are proper. Than Odin Twrp 3 0.0 . Make sure you back up your data from internal storage because when you Odin factory package it wipes phone storage. I learned this the hard way lost a bunch of pictures lol anyway I found this to be the best way. Hoping this helps....
Sent from my SM-G935F using XDA-Developers mobile app
inspired55 said:
If you have the mm bootloader and modem installed just wipe and flash. But I believe cm 13 could be ran on the lp bootloader. I odined the stock tar first that way you know all the partitions are proper. Than Odin Twrp 3 0.0 . Make sure you back up your data from internal storage because when you Odin factory package it wipes phone storage. I learned this the hard way lost a bunch of pictures lol anyway I found this to be the best way. Hoping this helps....]
Click to expand...
Click to collapse
1. is there a way to tell which bootloader I have?
2. I'm running teamwin.. I assume that's fine for flashing Phoenix but does one really need Odin?
3. I had a rooted stock image before I installed CM13.. (the stock image was so dang slow.. forget which.)
thanks again!
Gary
gpinkham said:
1. is there a way to tell which bootloader I have?
2. I'm running teamwin.. I assume that's fine for flashing Phoenix but does one really need Odin?
3. I had a rooted stock image before I installed CM13.. (the stock image was so dang slow.. forget which.)
thanks again!
Gary
Click to expand...
Click to collapse
Get any phone info app and check and see if your bootloader ends in pe1 if it don't you don't have mm bootloader. Teamwin is twrp just make sure it's version 3.0.0 that version seems to do best with the phoenix rom.
Sent from my SM-G935F using XDA-Developers mobile app
inspired55 said:
Get any phone info app and check and see if your bootloader ends in pe3 if it don't you don't have mm bootloader. Teamwin is twrp just make sure it's version 3.0.0 that version seems to do best with the phoenix rom.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Sorry for eavesdropping but I dont think that PE3 came yet, either via OTA or on sammobile.
Correct me if I am wrong
Sent from my SM-G900T using XDA-Developers mobile app
S.N [user=2501176 said:
@.k.[/user]3;67525688]Sorry for eavesdropping but I dont think that PE3 came yet, either via OTA or on sammobile.
Correct me if I am wrong
Sent from my SM-G900T using
I'm sorry you are correct I meant pe1 pe3 is for the Note 4. I've been working with a friends note 4 past few days. Thanks for catching my error . Hate giving wrong advice... original post edited...
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
inspired55 said:
Get any phone info app and check and see if your bootloader ends in pe3 if it don't you don't have mm bootloader. Teamwin is twrp just make sure it's version 3.0.0 that version seems to do best with the phoenix rom.[/URL]
Click to expand...
Click to collapse
thanks for sticking with me on the all the newbie questions.. bootloader version reported as G900TUV1FOG6.. later in the list it shows Latest Firmware: G900TUVUGPE1/G900TTMBGPE1/G900TUVU1GPE1.. so at first I was thinking I was ok.. but that second entry had me wondering.. (dang.. just noticed this was never submitted (from 6/28).. oh well)..
ok.. So I assumed I'm good to go.. installed the latest TWRP (3.0.2).. wiped the data area and tried to flash Phoenix.. It starts installing Aroma.. and within a couple of seconds the phone reboots back into TWRP.. did this a few times.. rebooting into the OS gets me a new Cyanagenomod not Phoenix.. figure I must be missing a step somewhere (or have something that is preventing Phoenix from installing).. thoughts?
thanks again!!
gpinkham said:
ok.. So I assumed I'm good to go.. installed the latest TWRP (3.0.2).. wiped the data area and tried to flash Phoenix.. It starts installing Aroma.. and within a couple of seconds the phone reboots back into TWRP.. did this a few times.. rebooting into the OS gets me a new Cyanagenomod not Phoenix.. figure I must be missing a step somewhere (or have something that is preventing Phoenix from installing).. thoughts?
thanks again!!
Click to expand...
Click to collapse
I think you still don't have the correct bootloader . The firmware is mm because your using CM13. The easiest way to get it done for sure is to odin the official MM firmware. Than install Twrp 3.0.0 flash superuser to have root . Reboot in recovery and flash phoenix rom v12.0 than the 12.6 update. This may take extra time this way but all the partitions will be correct. Or odin bootloader in BL slot and modem in cp slot . Don't set for auto reboot pull battery back into download mode Odin Twrp pull battery. Reboot into recovery than flash superuser. Than flash phoenix. Good luck
Sent from my SM-G935F using XDA-Developers mobile app
inspired55 said:
I think you still don't have the correct bootloader . The firmware is mm because your using CM13. The easiest way to get it done for sure is to odin the official MM firmware. Than install Twrp 3.0.0 flash superuser to have root . Reboot in recovery and flash phoenix rom v12.0 than the 12.6 update. This may take extra time this way but all the partitions will be correct. Or odin bootloader in BL slot and modem in cp slot . Don't set for auto reboot pull battery back into download mode Odin Twrp pull battery. Reboot into recovery than flash superuser. Than flash phoenix. Good luck
Click to expand...
Click to collapse
OK.. you may be right.. I downgraded TWRP to 3.0.0 and the install started working fine.. but now the reboot into Phoenix has been going for about 35 mins.. I know it can take some time but that seems extreme.. will wait a bit longer and if it doesn't work I'll try the steps you listed above..
thanks again
Gary
inspired55 said:
I think you still don't have the correct bootloader . The firmware is mm because your using CM13. The easiest way to get it done for sure is to odin the official MM firmware.
Click to expand...
Click to collapse
Well I used Heimdall.. flashed a bootloader image MM.. now the phone seems to be completely bricked.. get the samsung galaxy s5 screen keys light up.. and just sits there.. time to toss it I guess. .(was a freebie anyway)..
gpinkham said:
Well I used Heimdall.. flashed a bootloader image MM.. now the phone seems to be completely bricked.. get the samsung galaxy s5 screen keys light up.. and just sits there.. time to toss it I guess. .(was a freebie anyway)..
Click to expand...
Click to collapse
Got the phone back to CM13. so back to crappy bluetooth music streaming.. ha.. oh well I will give this try again some other day..
thanks again for the help!
Gary
gpinkham said:
Got the phone back to CM13. so back to crappy bluetooth music streaming.. ha.. oh well I will give this try again some other day..
thanks again for the help!
Gary
Click to expand...
Click to collapse
Gary look in this general section for the post that instructs you how to install factory mm. Follow the guide. Google to see how to install factory tar files using Lunix . I'm guessing my instructional writing skills leave something to be desired lol . Once you have the factory mm up and running install Twrp flash superuser reboot. Than reboot into recovery flash phoenix rom. Good good
Sent from my SM-G935F using XDA-Developers mobile app