Q&A for [CM12] [Lollerpop] JFLTEVZW Nightly Kangs
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [CM12] [Lollerpop] JFLTEVZW Nightly Kangs. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Looking very good so far. Just a couple things I noticed.
Contacts app crashes when trying to view a listing.
Bluetooth audio is slow and low pitched and skips a lot - makes it unusable for the time being.
MMS
Anyone else having issues with MMS? With the 11/21 build through the 11/25 build I don't always receive my MMS messages. Seems to work with the first message received after boot but after that it takes up to 15 minutes to receive a MMS if I get it at all. It also seems to take a very long time to send MMS messages out. The problem seems worse when I have WIFI enabled but it could be unrelated. I did clean installs and I am on the I545VRUFNG6 baseband if that makes a difference. Also, starting with the 11/24 build I had to go into my Network and toggle LTE/CDMA to connect to the verizon network after every boot.
If I could get MMS working reliably I would use this as my daily. Thanks for the good work devs.
whichonespink73 said:
I'm having a weird issue with my MMS. I am able to send always, but when receiving they almost always show up as "New MMS message to doanload: size xKB, expires [date]". At first I just thought it was my reception, but that doesn't seem to be the case as it's kind of a rampant issue. I only noticed this because I'm in an ongoing group chat with some old friends and I will get about 10 of these obnoxious messages with very few coming through on the first try. Thoughts?
Click to expand...
Click to collapse
I have the same issue as well. 1st MMS is usually quick but every message after send or receive takes really long. Recieved messages take up to 10 mins if i get them at all.
Home button wake on lock screen
My home button does not turn the screen on at the lock screen and I've got a malfunctioning power power button. I'm running 11/23. Do any of the newer builds permit such an action? I have attempted to change the key log but that isn't working for whatever reason. Does anyone have any suggestions?
Yes, home button wake has worked for about a week.
gonzlobo said:
Yes, home button wake has worked for about a week.
Click to expand...
Click to collapse
Thank you!
Notification pulldown
Pulling down twice from the center or once from the right side gives me my full notification toggles, but underneath my profile photo it has the text "null - null". Is there any way to get rid of this? Version 12/3
I believe it has to do with a weather icon but then again I'm not entirely sure.
It was the weather in the status bar option in settings, thanks for the fast PM's you guys are fantastic.
Having issue with voicemail. Dialer is crashing every time i call my voicemail but if I do not clear the error, everything works but because of the in screen error, I cannot interface with the keypad. Sorry if this is a known issue but I've been using this since day one and just noticed it and do not remember seeing this issue in the thread.
Sent from my SCH-I545 using XDA Free mobile app
Quick question [HELP NEEDED]
Quick question for the more knowledgeable here:
My Device: Verizon Galaxy s4
Current daily driver: Hyperdrive 18.1
Baseband: I545VRUFNC2
I read on the CyanogenMod official site that attempting to flash a CM based ROM on NC2 is more or less a suicidal move. Does anybody know any way i can work around this limitation? I want to try out this (or any other) Lollipop ROM
Thanks!
Anyone have swype working? Which keyboard?
thedoman said:
Anyone have swype working? Which keyboard?
Click to expand...
Click to collapse
SwiftKey works great for me.
[GS4 VZW] Problem Updating from CM11 KitKat 4.4.4 to CM12
I have had my phone rooted since the day I got my GS4 VZW, which was the day after it was released, and I have almost exclusively been on Cyanogen Mod 10/11 the entire time.
I am currently having trouble updating to CM 12. After I factory restore in CWM and wipe dalvik, I go to install the newest CM12 and I receive the "installation aborted error." I tried installing several other compatible versions of CM12 and all receive the same abortion error. I then reverted back to CM11 and I had no problem installing the rom as well as GApps. I even went through the MetaINF>Com>Google>Android>Updater-Script and removed the check device to see if that would change anything; it did not. Can someone assist me with this problem, I have no idea what's wrong and I've scoured the forum for the past day trying to find a solution and I've found nothing. Thanks for any help offered!
Jas_Bart said:
I have had my phone rooted since the day I got my GS4 VZW, which was the day after it was released, and I have almost exclusively been on Cyanogen Mod 10/11 the entire time.
I am currently having trouble updating to CM 12. After I factory restore in CWM and wipe dalvik, I go to install the newest CM12 and I receive the "installation aborted error." I tried installing several other compatible versions of CM12 and all receive the same abortion error. I then reverted back to CM11 and I had no problem installing the rom as well as GApps. I even went through the MetaINF>Com>Google>Android>Updater-Script and removed the check device to see if that would change anything; it did not. Can someone assist me with this problem, I have no idea what's wrong and I've scoured the forum for the past day trying to find a solution and I've found nothing. Thanks for any help offered!
Click to expand...
Click to collapse
Did you verify the MD5 checksum? Might be a bad download.
EDIT: I just re-read your post, I suppose it's unlikely that you would have had several bad downloads, but it's still worth checking the MD5. Also, which recovery do you have? You might have to toggle the script asserts before you flash the rom.
keyboard issue
Hey I'm on yesterday's nightly (12/17) and am having an issue with my keyboard. I can't seem to get it to use Swiftkey, each time I set it to swiftkey under Language & input it only seems to work for one use and the next time I go to search / text I have google keyboard. Anyone else seeing this? Rom otherwise running great ... just made the jump from Kitkat Monday and am very impressed with how stable this is already.
ascallop said:
Did you verify the MD5 checksum? Might be a bad download.
EDIT: I just re-read your post, I suppose it's unlikely that you would have had several bad downloads, but it's still worth checking the MD5. Also, which recovery do you have? You might have to toggle the script asserts before you flash the rom.
Click to expand...
Click to collapse
Okay I found the fix to anyone with the same problem. I was using a Mac to download the .zip files and what would happen is that safari would automatically unzip the files and to fix it I thought I could just simply compress them again. Here is the fix, go to Safari>Preferences>General and uncheck the "open safe files after download" box and that will prevent the files from automatically unzipping. Then you can go ahead with flashing your rom normally. Hope this helped anyone using a mac and trying to update their GS4!
medic211987-2 said:
Quick question for the more knowledgeable here:
My Device: Verizon Galaxy s4
Current daily driver: Hyperdrive 18.1
Baseband: I545VRUFNC2
I read on the CyanogenMod official site that attempting to flash a CM based ROM on NC2 is more or less a suicidal move. Does anybody know any way i can work around this limitation? I want to try out this (or any other) Lollipop ROM
Thanks!
Click to expand...
Click to collapse
Bootloader needs to be MDK to flash CM since that is the only bootloader capable of being locki'd to flash a new kernel. Modem can be any one you want.
lRawd said:
I have the same issue as well. 1st MMS is usually quick but every message after send or receive takes really long. Recieved messages take up to 10 mins if i get them at all.
Click to expand...
Click to collapse
same problem here. But i've had this issues since CM11
jareddlc said:
same problem here. But i've had this issues since CM11
Click to expand...
Click to collapse
I was able to fix the issue by flashing SLIM_APNS.zip. I am on VZW and that fixed all of my mms issues. On CM11 I fixed it by editing APN settings which I assume this zip does. Let me find a link to the zip/post.
---------- Post added at 10:46 AM ---------- Previous post was at 09:59 AM ----------
For any VZW users having MMS issues, flashing the SLIM_APNS.zip from here seems to work.
what modem are you running?
Related
[Q&A] [ROM][22-9] XtreStoLite G900T 1.3.6a [569MB][BNH5][Extreme Debloated][Add-on P
Q&A for [ROM][22-9] XtreStoLite G900T 1.3.6a [569MB][BNH5][Extreme Debloated][Add-on Package]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][22-9] XtreStoLite G900T 1.3.6a [569MB][BNH5][Extreme Debloated][Add-on Package]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Anyone else having an issue with this ROM and google maps randomly saying "Maps has stopped working" over and over and over whenever you try to go to navigation?
Model number changed to 900T
A bit of a newbie question...sorry in advance!
I installed v1.3.6 on my Samsung G900F, and so far, everything is great. When I installed the custom ROM, the model number changed to G900T. If I want to install v1.3.7, do I use the G900F version or the G900T version?
Thanks!
Help please I followed the instructions to the T I updated to the nh5 bootloader and modem via the instructions everything seems well but my download speeds are horrible I'm not getting more than 5 down in an excellent coverage area with full signal bars, I was on ne6, just got the phone Tuesday and now my data is so slow can anyone please help!!
---------- Post added at 09:32 PM ---------- Previous post was at 09:30 PM ----------
Sorry flashed latest version, on nh5 baseband and modem
Morning all,
Just recently did a full system/cache/dalvik wipe and flashed 1.3.6a.. Then I used Odin to flash bootloader/modem. ROM has been working great, but have noticed that my data connections are turning off a few moments after the screen is off. I checked power saving mode, which wasn't even selected to be installed with the Aroma package. But Restrict Background Data.. setting is off. Turned it on, and back off, same result. I have Always On for my WiFi, but that terminates as well.
Bluetooth and my cell signal (no data) are the only things showing for connections after a few moments if screen off.
Any thoughts?
489
I've been receiving random reboots out of the ordinary, no FC, just a reboot. As of now i loaded the default settings from Ktweaker. I will observe it for a while. Any tips on how to avoid random reboots and what advice can you give to preserve my phone's lifespan?
thanks for the rom
This has been the only rom I've been using and I love it, Thanks for the work.
Will the G900T still be updated or should I just follow the INTL version?
solved my SM-G900T problems
I was seriously about to dump this phone until I found this ROM. I had been having multiple Bluetooth issues streaming music running stock TW. Recently tried CM12 nightlies with similar to worse results even with Ktoonsez kernel. Tried a few other Lollipop Roms that turned out to be unstable at best. Read a post on another forum about this ROM. Installed it two weeks ago and am happy to report that I no longer have Bluetooth stutters and connectivity problems. My phone performs as one would expect. Thank you!
5.0 for wifi calling
I do really like the wifi calling feature, so is there any possibility for u guys to update it?
Awesome rom! I was just wondering if there is a way to add viper audio on it?
I was wondering when using the call recording feature where the recordings are saved. When the recording is stopped it says "saved to my files" looking through my directory I can't seem to find a folder by that name.
Where can I find the boot loader and modem for BNH5?.
Rooted.. Custom Kernel and Rom.. How to factory Reset
Hey guys... just as subject says. I have an S5 SM-G900T. It is Rooted with custom rom, ZtreStoLite 1.3.6a and Ktoonsez Kernel. I wish to factory reset without messing it up. I have a buncha pop up notifications from games I used to play on the phone(facebook stuff) that for some reason didn't stop when I uninstalled the stuff. I wish to keep my phone the same just to get back to when I first loaded the custom rom.
Thanks in advance, and any other info needed feel free to ask.
Komiical
What would cause slow browser loading? Data is not slow, but any browser loads really slow. Thanks
delete Xposed Installer, greenify and adaway or any similar ad blocker.
reboot, have fun.
Hey guys, what happens if I do not do a Data/Factory reset first in recovery before I run my install (and select the second option - to keep my apps)? What are the downsides?
Thanks!
Download failed
I tried to flash a few times now and every time is the same. I download files with opera, chrome and gmail and it says download failed, the files don't appear anywhere but when I go to download again it asks for overwrite. Pictures I take don't appear in the file browser in the camera folder or the gallery until after the next flash (external sd).
It happened after the first time I flashed ktoonsez, after that I tried to fix it with the stock kernel but it didn't work (does the installer flash the stock or does it assume it is already installed and skips?).
P.S. It downloads apps through play store and internet works just fine (full speed).
Nevermind, flashed stock then reflashed xtrestolite and it works as it should now.
Question, if I have the stock lollipop baseband and modem already from the factory do I have to still upload my bootloader and modem? Or do I have to downgrade to kitkat bootloader and modem for this room to work?
I tried it with the lollipop baseband and modem and it just sits at a black screen after Samsung logo. I let it sit for over 70 min and nothing beaides the black screen. Tried multiple times to flash, re-download, and still nothing.
This also happened when I tried to deodex my stock rom too.
Sent from my SM-G900T using XDA Free mobile app
Thanks for the awesome!
Just wanted to say thanks for the awesome rom!
It was just what I was looking for. Loved how striped down it is and the fact I can still use ART.
<s>Only thing I wished is that I could figure out how to get the original voice-to-text to work... On stock 4&5 using swiftkey when I use voice-to-text it shows up in the keyboard tray and inputs the words directly than underlines things it didn't quite hear right and I can go back and fix things if needed. Using this Rom it pops up the normal google themed voice search that then makes you select from a list of a couple of options based on what you said.
Tried installing Svoice doesn't seem to be the missing link so I'm kind of at a loss. XD</s>
Never mind I'm complaint free now.
I was being silly and was using the swiftkey app I paid for from Amazon app store rather than the newer "now free" version from the Playstore...
Wipe
If I dont do a full wipe and install this rom what would happen?
Q&A for [rom]{kitkat}[4.4.4]{OFFICIAL_BeanStalk}[quincyatt]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [rom]{kitkat}[4.4.4]{OFFICIAL_BeanStalk}[quincyatt]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
i717 beanstalk stopped working
Hello, i have the i717 with beanstalk and all of a sudden it reboot and am having message pop up with "Unfortunately, the process com.android.systemui has stopped" i push ok and just keeps popping up. I cant do anything at all and if it goes to sleep and i wake up it reboots again to the same thing. Please any help would be appreciated, hope i dont have to restore . Thx, i needed to use phone so had to restore . Still what would cause it to do that, I've been using beanstalk for a couple months and never had problems minus the rarely random reboot.
Hope this helps
svoooll said:
Hello, i have the i717 with beanstalk and all of a sudden it reboot and am having message pop up with "Unfortunately, the process com.android.systemui has stopped" i push ok and just keeps popping up. I cant do anything at all and if it goes to sleep and i wake up it reboots again to the same thing. Please any help would be appreciated, hope i dont have to restore . Thx, i needed to use phone so had to restore . Still what would cause it to do that, I've been using beanstalk for a couple months and never had problems minus the rarely random reboot.
Click to expand...
Click to collapse
Re flash the Rom, flash any 4.4.4 gapps, flash pollution patch.
1) boot in to recovery
2) wipe cache and dalvik cache.
3) install beanstalk
4) Flash gapps
5) flash pollution patch
hope this helps
I just installed this following the instructions, and I'm having some sort of problem with vibrations....there just aren't any type of vibrations at all? When I adjust volume down all the way, it just goes from volume to mute (usually it goes volume down->vibrate->mute all). No vibrations from apps that are supposed to vibrate. No vibrate on notifications. No vibration options anywhere. No haptic feedback.
Am I missing something?
Love the ROM. my OG Note is back to use, thanks to you.
I use my i717 in class as my management tool. Timer, classdojo, GVoice for parents, presentation remote, and even as note taker for my disabled students.
As I teach, I love being able to hand off my phablet to a student to do a small task. They love it too. I tried the Users section to make a teacher account and a student account. It has a lot of crashing and it resets my original account (factory wipe, I guess).
What should I do?
Thanks in advance.
Sent from my SM-N900A using XDA Free mobile app
cant use playstore on beanstalk 4.4.4 quincyatt i717
I have a samsung galaxy note i717 ATT I installed CyanogenMod, wiped everything 3 times, (of course made a backup of my original which i had to restore) i installed beanstalk 4.4.4 quincyatt for the i717, then i did gapps 4.4.4 (i cant remember which one) and i cant sync my gmail account. i then flashed another gapps and google play kept crashing so i flashed back to where it wouldnt sync. once i got off work I had to restore back to my original att setup which i hate and its slow :/ I love how the 4.4.4 ran. if anyone recommends a better rom for my note please let me know or how I can fix this. I am a complete newbie to this but im learning. Atleast I didnt brick my phone yet lol. I also used odin to install CM.
Files I used (File Names)
recovery-quincyatt-clockwork-touch-6.0.4.3.tar
Odin 307
BeanStalk-4.4.4007-20140711-quincyatt.zip
pa_gapps-stock-4.4.4-20141214-signed.zip
I hope I gave enough information and thank you guys in advance. Hopefully I can learn some more about this, it's pretty interesting. My next step is to learn to customize my boot loader. I also used a patch "Polluti0ns_rom_patch_v2.zip and I checked all the options not sure if I was supposed to lol but it fixed my screen flickering and I used to to change the bootloader to "Blue Flame" which looked like smoke on water. It was better than the ATT junk though lol and looked neat.
Alurian said:
I have a samsung galaxy note i717 ATT I installed CyanogenMod, wiped everything 3 times, (of course made a backup of my original which i had to restore) i installed beanstalk 4.4.4 quincyatt for the i717, then i did gapps 4.4.4 (i cant remember which one) and i cant sync my gmail account. i then flashed another gapps and google play kept crashing so i flashed back to where it wouldnt sync. once i got off work I had to restore back to my original att setup which i hate and its slow :/ I love how the 4.4.4 ran. if anyone recommends a better rom for my note please let me know or how I can fix this. I am a complete newbie to this but im learning. Atleast I didnt brick my phone yet lol. I also used odin to install CM.
Files I used (File Names)
recovery-quincyatt-clockwork-touch-6.0.4.3.tar
Odin 307
BeanStalk-4.4.4007-20140711-quincyatt.zip
pa_gapps-stock-4.4.4-20141214-signed.zip
I hope I gave enough information and thank you guys in advance. Hopefully I can learn some more about this, it's pretty interesting. My next step is to learn to customize my boot loader. I also used a patch "Polluti0ns_rom_patch_v2.zip and I checked all the options not sure if I was supposed to lol but it fixed my screen flickering and I used to to change the bootloader to "Blue Flame" which looked like smoke on water. It was better than the ATT junk though lol and looked neat.
Click to expand...
Click to collapse
I'm not on this at the moment but I have used beanstalk previously and do not recall any major issues. I used gimmeitorilltell's TWRP recovery (the unofficial one) to flash. I generally use a minimal gapps for kitkat. If you don't need more, I say, don't install more. (Though loading a full gapps puts apps in system where they don't eat up sdcard space like they do when downloaded from the Play store).
Sent from my SAMSUNG-SGH-I717
I found that the 4.3 ran smoother than the 4.4 build.
Sent from my SM-T310 using XDA Premium 4 mobile app
Is this ROM vulnerable to Stagefright? Any custom roms have this fixed yet?
Q&A for [ROM][I605]Cyanogenmod 12.0 [12/12/14]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][I605]Cyanogenmod 12.0 [12/12/14]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Wow
glockman4519 said:
I'm going to have to give that a shot. Thanks.
Click to expand...
Click to collapse
Thanks for the Lp rom will try it out when its more stable
Nice build BTW so far I can only get to the loading screen and bootloops.
Device: SHV-E250S
I tried dirty flashing from CM11 to CM12. Also flashed signed converter e250s but only stuck on Samsung Logo then reboots.
Flashed different Kernels and finally CM Logo appeared but it was sitting there for 45 mins and nothing happens.
Thanks
Nice Job
I went ahead and flashed this bad boy after reading up on it and noticed that its smooth and I got mobile data working calls and texts working only had issues with the camera and gps otherwise I was impressed with the rom build being so early and running so smooth way to go keep up the hard work and im sure its not just me but we all appreciate what you are doing for the Note 2 community Thanks Again
Working
I got the install working as correctly as everyone else.
I originally tried just dirty flashing over my current ROM(LiquidSmooth 3.2 Milestone based on 4.4.4) and that didn't work right. I factory reset and then went right to an install. Haven't had to play with any settings beyond the keyboard to get everything working correctly.
I can make and receive phone calls
Front facing camera is the only of the two that works.
Texts and can be received no problem, I haven't been able to try MMS as I get almost no service at my house as it is.
Overall this ROM works freaking great. Thanks @sbrissen!
Agree with moovlin. Been working well though occasionally dropping data. Couldn't thumbs up the solution since to new to this forum.
Sent from my SCH-I605 using Tapatalk
Update Issues
The last couple times I've tried updating from within the phone OS, I get a boot lock or a lot of FCs after. Will see if I can get it unstuck with a battery pull and a manual update. Is that feature not really working yet? or only with certain recoveries?
Thanks
---------- Post added at 04:21 PM ---------- Previous post was at 03:36 PM ----------
From within OS fails on my phone FCs nothing works most all setting lost, downloaded to extcard and updated, worse, it doesn't see my SIM card, and FCs. I'll try one more time with a full wipe and hope for the best. Anyone else having these issues? Worked good with this one from the weekend cm_i605-ota-bfb35cbe6b.
---------- Post added at 04:45 PM ---------- Previous post was at 04:21 PM ----------
Full clean wipe and reset seem to have fixed the issues. Letting it do it's restore process. A new feature maybe? Or just new window paint on the old process. I used today's update, and the 11/09 gapps here. I know there are several updates to the GAPPs too, but getting the phone to work again is most important. Keyboard does popup right away, I don't care for that keyboard at all, but hopefully with the reset, it will load and I can just select it again.
Seems to be going well so far. A lot of aps to download again. I hadn't setup the backup software to run yet...
Working
I installed this about a week ago and it's been working great! I haven't had any of the SMS or battery (wakelock) issues that others have reported, but i did have an issue where i could not make outgoing calls (it would immediately say "call ended", but the other side would ring) when it was first installed. It fixed itself after a couple of days. This is on the 12/17 build with the GPS hotfix. This is my first time installed a non-TW ROM, but I'm glad i tried it out! Keep up the good work!
Boot Loop
I'm trying to flash to the nightlies cm12's. i've done a fresh wipe. when i restart the it gets to the "updating apps" and reboots after it finishes the updates. after it just continues rebooting after a minute. any suggestions?
Could not receive incoming or hang up outgoing phone call. on CM12.1
I am using netzclub in Germany, data and SMS are fine. However, I find myself could not hang up on outgoing phone call. Incoming calls are a bit more tricky. The only call I could receive so far is the one from Google verification. The one who is calling can hear ringing and get directed to the voice mail.
I can try get a logcat. Shall I change the level of logcat?
It actually start from CM12 builds. I have tried wiping and fresh installation, nothing works, though.
I'm still on CM12, the build from April 16th, but I'm not quite ready to make the change to 12.1. I wanted to flash the last CM12 nightly, but I can't download it. Are the builds gradually rotated off of the site, or deprecated? Is there any other way I could download the last CM12 nightly?
Can't get GAPPs in CyanogenMod 12.1
I have a Verizon Note II SCH-1605. I had some version of CyanogenMod 12.0 installed, which included GAPPs. All was cool except GPS would not work; it kept turning High Accuracy mode off. So I'm trying to see if 12.1 is any better.
I can install cm-12.1-20150505-NIGHTLY-i605 with no issue using TWRP 2.6.0.1. When I try to install gapps-5.1-arm-2015-05-03-16-32-37 from the CyanogenMod web site or gapps-lp-20141109-signed from the [ROM][I605]Official Nightlies CM 12.1 thread or one or two others that I forget I get "set_metadata_recursive: some changes failed."
Anybody know of a GAPPPs version that might work?
---------- Post added at 12:59 PM ---------- Previous post was at 12:18 PM ----------
Forgot to mention that I wiped everything except the external sdcard, and I tried installing the gapps at the same time as CyanogenMod or after CyanogenMod is all set up.
jobren said:
I am using netzclub in Germany, data and SMS are fine. However, I find myself could not hang up on outgoing phone call. Incoming calls are a bit more tricky. The only call I could receive so far is the one from Google verification. The one who is calling can hear ringing and get directed to the voice mail.
I can try get a logcat. Shall I change the level of logcat?
It actually start from CM12 builds. I have tried wiping and fresh installation, nothing works, though.
Click to expand...
Click to collapse
Same issue here as well. I've tried the latest i605 nightly and the problem is still present. I've had to revert to a CM12 build dated 30 Jan 2015 in order to have a working phone.
Can we get the APN fixed?
Are u on a nightly build ?
Yes I stay current with the nightlies .
Wrapscallion said:
I'm still on CM12, the build from April 16th, but I'm not quite ready to make the change to 12.1. I wanted to flash the last CM12 nightly, but I can't download it. Are the builds gradually rotated off of the site, or deprecated? Is there any other way I could download the last CM12 nightly?
Click to expand...
Click to collapse
Here you can found all new version of the nightly build : http://download.cyanogenmod.org/?device=i605&type=nightly
Don't forget that if you are on a nightly build you have to flash your phone with a nighty update, you can switch between builds.
Q&A for [ROM][CM12.0] Official CM12.0 for E970
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][CM12.0] Official CM12.0 for E970. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
wkobaint said:
Could this versions working on e975?
Click to expand...
Click to collapse
Nope, but if you choose you model from device list below, it will works.
So I dirty flashed this over my cm11 and Google play has stopped working. Won't connect at all. Any help is appreciated
Volstagg.The.Valiant said:
So I dirty flashed this over my cm11 and Google play has stopped working. Won't connect at all. Any help is appreciated
Click to expand...
Click to collapse
Did you flash 5.0 gapps?
dandrumheller said:
Did you flash 5.0 gapps?
Click to expand...
Click to collapse
Nope. Could find only old gapps
terribly sorry about the brain fart. whole problem arose because i didnt flash the correct gapps . got the gapps from xda and now its working well. but i am getting a pop up saying that google play services have not been installed on your computer etc...
will this problem go away if i just install the google play services apk?
edit : after flashing the proper gapps, an update from the play store solved everything. Now running smoothly.
since i updated to cm12,go power master has not been able to turn data off when the screen turns off. this was working flawlessly in kitkat. even the go power master widget is not working. thought there might be a problem with root,so flashed supersu 2.40 from recovery. but still it isnt working. any idea what the problem might be?
Volstagg.The.Valiant said:
since i updated to cm12,go power master has not been able to turn data off when the screen turns off. this was working flawlessly in kitkat. even the go power master widget is not working. thought there might be a problem with root,so flashed supersu 2.40 from recovery. but still it isnt working. any idea what the problem might be?
Click to expand...
Click to collapse
Has the app been updated to support LP? At times in the past, access for 3rd party apps to stuff like data connection, which requires root, sometimes changes functionality with version upgrades. Don't know if that's the case in this circumstance, but it's something to look into.
Performance drop
Flashed this rom with fulll wipe. Works well, but sometimes performance *drops* happens. It becomes VERY slow, like CPU speed drops down to 128mhz. I had the same problem on cm 11.
Who knows how to fix it?
Looking great and functions great but I am getting terrible battery life due to "miscellaneous" or "Cellular Standby" according to battery stats.
E970
1/15/2015 nightly (problem persists from previous nightly)
Same problem on stock and Solid_GEEB Kernel
PA 5.0 GAPPS
Lucky to get 12 hours of battery under normal use. Any suggestions?
Thanks,
-Nick
Any ideas how to fix my issue with the BT mac address being changed to "00:00:00:00:5A:AD"? I had the wrong address on CM11 also but it was a different incorrect address and I was able to fix it. I've posted details in my thread for fixing the issue on CM11. http://forum.xda-developers.com/showthread.php?t=2759056#post58131969<br/>
Video call issue
Video call isn't working in both skype and viber. Skype app is crashing as soon as I turn video on. Viber just doesn't turn on the video transmission. Can please somebody report about this issue to CyanogenMod team. I use video calling really often, so this is kind of issue keeps me away from using official CM12 builds. CM11 builds had this issue too and it hasn't got fixed till now.
azatheadfi said:
Video call isn't working in both skype and viber. Skype app is crashing as soon as I turn video on. Viber just doesn't turn on the video transmission. Can please somebody report about this issue to CyanogenMod team. I use video calling really often, so this is kind of issue keeps me away from using official CM12 builds. CM11 builds had this issue too and it hasn't got fixed till now.
Click to expand...
Click to collapse
Post a logcat of it happening.
Sent from my LG-ls990 using XDA Free mobile app
CM Updates
Settings - About phone - CyanogenMod updates indicates no new updates found despite new updates posted at http://download.cyanogenmod.org/?device=e970. I switched from unofficial CM12 to official CM12 several updates ago. I'm using the gapps posted here https://s.basketbuild.com/gapps. Is there a setting I need to revise to begin seeing the CM updates on my phone. It's no big deal since I can go to the CM device list and download directly.
alliance1975 said:
Settings - About phone - CyanogenMod updates indicates no new updates found despite new updates posted at http://download.cyanogenmod.org/?device=e970. I switched from unofficial CM12 to official CM12 several updates ago. I'm using the gapps posted here https://s.basketbuild.com/gapps. Is there a setting I need to revise to begin seeing the CM updates on my phone. It's no big deal since I can go to the CM device list and download directly.
Click to expand...
Click to collapse
The 1/27 update was detected and installed. I do not know what if anything i did to make it work.
Shelnutt2 said:
Post a logcat of it happening.
Sent from my LG-ls990 using XDA Free mobile app
Click to expand...
Click to collapse
Sorry for late answer. I was too busy to post logcats earlier. I hope issues will get fixed.
I installed CM12.0 (1/27 build) but any 5.0 gapps I try fails to flash on the official TWRP 2.8.3.0 for the e970. I've tried bpear, PA, and one other. I can get the ROM to boot, then it gives FC's for every Google App, and the apps are all named by their com. ... name, and say "app not installed" when clicked. I have loaded the zip files over wifi, through adb push, via usb, and through straight download to the device. I've also run them from the external SD and the internal storage.
Is there a different recovery I should be using with this? Will a Nexus 4 recovery work on the e970?
thunder2132 said:
I installed CM12.0 (1/27 build) but any 5.0 gapps I try fails to flash on the official TWRP 2.8.3.0 for the e970. I've tried bpear, PA, and one other. I can get the ROM to boot, then it gives FC's for every Google App, and the apps are all named by their com. ... name, and say "app not installed" when clicked. I have loaded the zip files over wifi, through adb push, via usb, and through straight download to the device. I've also run them from the external SD and the internal storage.
Is there a different recovery I should be using with this? Will a Nexus 4 recovery work on the e970?
Click to expand...
Click to collapse
I'm using TWRP 2.8.4.0 recovery. I initially installed the CM12 unofficial rom along with this gapps:
https://s.basketbuild.com/gapps
and had no problem. I switched to official CM12 when announced by Shelnutt2 and have made no changes to gapps. Perhaps give that gapps a try.
Audio calls problem
Hi,
I recently updated my OS from LG's Official 4.1.2 to CM12. Everything seems to be working fine but for making/receiving calls. I am not able to hear or speak over the microphone and speaker outlet unless or until I use a headphones in which case both work properly. Can anyone please help?
Details on my upgrade:
I had backed up my data and downloaded the CM12 zip files with Gapps and SuperUser into my SD card. Once they were ready, I restarted my mobile in Recovery mode and wiped the user data and installed CM12.zip followed by Gapps followed by SuperUser. Then rebooted my mobile and check everything for the working condition. It was working perfectly except for the fact that when I receive phone calls or when I make a phone call once I attend the call, I would not be able to speak to the person or hear the person in normal mode nor in speaker mode. The only way it works is if I use my headphones.
I had installed CM12 01/26/2015 version. And have tried later versions until 01/30 but I do not find that to be fixing. It would be of great help if anyone could help me.
Thanks,
Arun
arun.rama said:
Hi,
I recently updated my OS from LG's Official 4.1.2 to CM12. Everything seems to be working fine but for making/receiving calls. I am not able to hear or speak over the microphone and speaker outlet unless or until I use a headphones in which case both work properly. Can anyone please help?
Details on my upgrade:
I had backed up my data and downloaded the CM12 zip files with Gapps and SuperUser into my SD card. Once they were ready, I restarted my mobile in Recovery mode and wiped the user data and installed CM12.zip followed by Gapps followed by SuperUser. Then rebooted my mobile and check everything for the working condition. It was working perfectly except for the fact that when I receive phone calls or when I make a phone call once I attend the call, I would not be able to speak to the person or hear the person in normal mode nor in speaker mode. The only way it works is if I use my headphones.
I had installed CM12 01/26/2015 version. And have tried later versions until 01/30 but I do not find that to be fixing. It would be of great help if anyone could help me.
Thanks,
Arun
Click to expand...
Click to collapse
Make a clean flash (in TWRP wipe system, data, cache, dalvik cache and after install cm12 and gapps) and install 84/27 hybrid modem during same recovery session, after reboot to system. Modem issues with e970 are really whimsical. I hope this will help.
P.S. Find modem image in this thread:
http://forum.xda-developers.com/showthread.php?t=2584981
azatheadfi said:
Make a clean flash (in TWRP wipe system, data, cache, dalvik cache and after install cm12 and gapps) and install 84/27 hybrid modem during same recovery session, after reboot to system. Modem issues with e970 are really whimsical. I hope this will help.
P.S. Find modem image in this thread:
http://forum.xda-developers.com/showthread.php?t=2584981
Click to expand...
Click to collapse
Hey, I just tried the steps you had mentioned and it worked like a gem. Thanks a lot for your solution. I really appreciate your help. Have a great weekend.
Arun
Q&A for [ROM] CM12-Light BETA
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] CM12-Light BETA. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
GPS Bug
Is the GPS still restarting the phone on this build?
Mustapha21 said:
Is the GPS still restarting the phone on this build?
Click to expand...
Click to collapse
Check the replies in the development build. T399 has to download an app specified in the development but people with the T399N seem to have no problems with v23.
Sent from my SGH-T399 using XDA Premium app
The developer Acreaperjb needed people to test the ROM and kireflow seems to have the SGH-T399N while he is meant to develop it for the SGH-T399. Is he now making a hybrid build for both models?
Sent from my SGH-T399 using XDA Free mobile app
wow
Had the lightwave rom on this before, and it worked well. After a few hrs of running cm i am blown away at the performance. Buttery smooth. Calls crisp, no issues whatsoever aside from the camera. Got xposed on it, gravitybox and greenify working great so far
And just thought I'd try it with the Camera MX from playstore and voila, it works! One picture at least
Bluetooth freezes calling app
Hi everyone, first of all, big thanks to AcreaperJB
I just installed version 0.2.3, overall I really like the ROM, I have two issues with it, really it's just one that I care about, here I go
1 - the big deal) I can't make calls over Bluetooth, after dialing I hear maybe one signal, maybe two if I'm lucky, after that the calling apps freezes, can't finish the call, can't call anybody else, can't hear anything, even turning off Bluetooth won't restore things, I can switch between apps and everything is fine except the calling app it's just stuck until I restart the phone, no more calling basically
2 - the workaround) camera will crash right after taking the photo, won't save the photo, I installed open camera from the play store and it works fine, I know it's a known issue, I just want to confirm it
Things to mention
- I did full install, all the partitions got wiped except the external SD card partition where I kept the ROM
- installation was scary, after installing the ROM it would circle back and forth, it was restarting and it wouldn't let me do anything, as soon as it got to CM wizard it restarted, I had no way to stop it or pause it so after about 10 restarts I gave up and just moved on and left the phone do restarts and I took care of other things around the house, already started thinking on how to go back to the stock rom, after coming back to the phone about two hours later the CM was waiting for me, got so surprised that it got out of the endless loop, i finished the wizard, went into CM and it doesn't restart anymore
thanks again
Uhm
Hey, does anyone know of a fix for the YouTube app? It keeps saying 'an error has occurred touch to retry'
SIM Card not detected?
So I clean installed the dirty v.0.2.3 and when it went to setup it said my sim card wasn't detected. Did I miss something? Does the "dirty" mean I won't get data? I'm new to this and I don't really know what the lingo means. I also can't change the APN's. It says "Access point name not available for this user".
I can't make any phone calls nor send any texts. My cellular data doesn't work either. Wi-fi and everything else works fine. Just the actual service.
Am I missing a step?
I flashed the ROM with twrp 2.8.4.0, I wiped davlick, data, cache, etc. I did the clean install, I don't understand why I am not getting any service or why my sim card isn't detected.
Please help
I need another link to download
Hi everyone
So my problem is for some reason here in Cuba I can enter to www.androidfilehost.com and download (Dirty) V.0.2.3 https://www.androidfilehost.com/?fid=24052804347774276 I dont know why but if anyone can please reupload the file to another server like MEGA or mediafire I have the Galaxy Light and I like to help to test the build and make some comments about.
Regards
michel0303 said:
Hi everyone
So my problem is for some reason here in Cuba I can enter to www.androidfilehost.com and download (Dirty) V.0.2.3 https://www.androidfilehost.com/?fid=24052804347774276 I dont know why but if anyone can please reupload the file to another server like MEGA or mediafire I have the Galaxy Light and I like to help to test the build and make some comments about.
Regards
Click to expand...
Click to collapse
https://mega.co.nz/#!R8RkhRTI!A72ioxNsedZ3uGgY3jE6MMjKkaVYYBwL8z8WBnie8lI
kireflow90 said:
https://mega.co.nz/#!R8RkhRTI!A72ioxNsedZ3uGgY3jE6MMjKkaVYYBwL8z8WBnie8lI
Click to expand...
Click to collapse
Thank you so much Downloading right now.
michel0303 said:
Thank you so much Downloading right now.
Click to expand...
Click to collapse
no problem, glad I could help
Screen going blank upon boot
I tried installing this rom after doing a full backup & then wipe. I made sure to wipe dalvik and cache. I then installed the 0.2.3.zip via TWRP 2.7.1.0 that comes with Light V3 Rom.
Install completed without error but upon boot the setup menu appears and then vanishes. I can get it to display ever-so-briefly by powering the display off/on.
I have a T-Mobile T399 unlocked for use on ATT. Unjustified Devs earlier builds did the same thing but would constantly reboot as well. Your rom doesn't reboot but the screen behaves similarly.
Have you heard of this behavior before, and are there any steps I can take to provide you with diagnostic information?
Update TWRP
Vorell said:
I tried installing this rom after doing a full backup & then wipe. I made sure to wipe dalvik and cache. I then installed the 0.2.3.zip via TWRP 2.7.1.0 that comes with Light V3 Rom.
Install completed without error but upon boot the setup menu appears and then vanishes. I can get it to display ever-so-briefly by powering the display off/on.
I have a T-Mobile T399 unlocked for use on ATT. Unjustified Devs earlier builds did the same thing but would constantly reboot as well. Your rom doesn't reboot but the screen behaves similarly.
Have you heard of this behavior before, and are there any steps I can take to provide you with diagnostic information?
Click to expand...
Click to collapse
Think you need to use the twrp 2.8.4 that is in the forum
http://forum.xda-developers.com/android/development/recovery-twrp-2-8-1-0-touch-recovery-t2924604
Try flashing a T-Mobile radio. Just Google it and it should come up.
Sent from my SGH-T399 using XDA Free mobile app
Answer: CM12-Light BETA for t399n camara workaround.
I have installed cm12 for the Samsung galaxy light t399N.. I am happy to report Everything is working fine! except the stock camera, I tried 7-8 camera apps on the Google play store with no luck, until.... VIOLA, I found one that works. It is called FOTOR. it works now. I have an extra step to deal with but the point is that my phone is now fully functional and running 5.02 lollipop on my METRO PCS t399n. BTW i did not have to edit the apn settings; interestingly, I have an indicator that tells me I have T-Mobil for my carrier.... Thank goodness for the recent merger and switch over to the T-Mobil network, one more problem solved. Hope that helps someone else out there.
thanks
it works
I'm using it a week ago, everythings is ok, only the stock camera not save the photos,
Sorry for my english,
---------- Post added at 01:18 AM ---------- Previous post was at 01:12 AM ----------
md777 said:
I have installed cm12 for the Samsung galaxy light t399N.. I am happy to report Everything is working fine! except the stock camera, I tried 7-8 camera apps on the Google play store with no luck, until.... VIOLA, I found one that works. It is called FOTOR. it works now. I have an extra step to deal with but the point is that my phone is now fully functional and running 5.02 lollipop on my METRO PCS t399n. BTW i did not have to edit the apn settings; interestingly, I have an indicator that tells me I have T-Mobil for my carrier.... Thank goodness for the recent merger and switch over to the T-Mobil network, one more problem solved. Hope that helps someone else out there.
Click to expand...
Click to collapse
I'm using the app A Better Camera, it's woking ok, on my t399n
Reboot cycle
After installing V0.2.3 using TWRP 2.8.4.0 on a T399 on a T-mo network I am stuck in a continuous cycle of rebooting every few seconds. I have tried reinstalling starting from a stock image and wiping the cache, data, and dalvik. Any idea what I could be messing up?
yodal said:
After installing V0.2.3 using TWRP 2.8.4.0 on a T399 on a T-mo network I am stuck in a continuous cycle of rebooting every few seconds. I have tried reinstalling starting from a stock image and wiping the cache, data, and dalvik. Any idea what I could be messing up?
Click to expand...
Click to collapse
Set GPS to device only
Sent from my SGH-T399N using XDA Free mobile app